! Started logfile: /scr/pima/rv100_uvs/J1528+3816_S_uvs.log on Mon Feb 29 13:28:22 2016 obs /scr/pima/rv100_uvs/J1528+3816_S_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J1528+3816_S_uva.fits ! AN table 1: 44 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.839286 visibilities/baseline/integration-bin. ! Found source: J1528+3816 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4136 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1528+3816_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.003449Jy sigma=10.180259 ! Fit after self-cal, rms=0.963595Jy sigma=9.782376 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=4.419 mas, bpa=-25.14 degrees ! Estimated noise=2.13758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030004 Jy ! Component: 100 - total flux cleaned = 0.036817 Jy ! Total flux subtracted in 100 components = 0.036817 Jy ! Clean residual min=-0.005813 max=0.004931 Jy/beam ! Clean residual mean=0.000000 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.036817 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.036817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051677Jy sigma=0.494882 ! Fit after self-cal, rms=0.049863Jy sigma=0.477666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=5.652 mas, bpa=-20.04 degrees ! Estimated noise=1.1063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254705 Jy ! Component: 100 - total flux cleaned = 0.00260614 Jy ! Component: 150 - total flux cleaned = 0.00251523 Jy ! Component: 200 - total flux cleaned = 0.00251332 Jy ! Total flux subtracted in 200 components = 0.00251332 Jy ! Clean residual min=-0.002774 max=0.002699 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0393303 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 0.0393303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049618Jy sigma=0.476101 ! Fit after self-cal, rms=0.049579Jy sigma=0.476067 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.907 x 5.652 at -20.04 degrees (North through East) ! Clean map min=-0.0026492 max=0.039166 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.07 KP 1.04 LA 0.99 MK 0.92 ! NL 0.91 OV 0.94 PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.049579Jy sigma=0.476067 ! Fit after self-cal, rms=0.049184Jy sigma=0.475805 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=5.66 mas, bpa=-20.45 degrees ! Estimated noise=1.09494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000479619 Jy ! Component: 100 - total flux cleaned = -0.000508587 Jy ! Component: 150 - total flux cleaned = -0.000483423 Jy ! Component: 200 - total flux cleaned = -0.000460172 Jy ! Total flux subtracted in 200 components = -0.000460172 Jy ! Clean residual min=-0.002661 max=0.002605 Jy/beam ! Clean residual mean=-0.000002 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0388701 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.0388701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049142Jy sigma=0.475596 ! Fit after self-cal, rms=0.049126Jy sigma=0.475551 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049126Jy sigma=0.475551 ! Fit after self-cal, rms=0.049617Jy sigma=0.474513 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.892 mas, bmaj=5.638 mas, bpa=-20.69 degrees ! Estimated noise=1.10798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635379 Jy ! Component: 100 - total flux cleaned = 0.000682459 Jy ! Component: 150 - total flux cleaned = 0.000725613 Jy ! Component: 200 - total flux cleaned = 0.000766034 Jy ! Total flux subtracted in 200 components = 0.000766034 Jy ! Clean residual min=-0.002682 max=0.002455 Jy/beam ! Clean residual mean=-0.000003 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0396362 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.0396362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049582Jy sigma=0.474381 ! Fit after self-cal, rms=0.049602Jy sigma=0.474173 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39156e-06 Jy ! Component: 100 - total flux cleaned = -2.76632e-06 Jy ! Component: 150 - total flux cleaned = 1.4684e-05 Jy ! Component: 200 - total flux cleaned = 3.14611e-05 Jy ! Total flux subtracted in 200 components = 3.14611e-05 Jy ! Clean residual min=-0.002603 max=0.002369 Jy/beam ! Clean residual mean=-0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0396676 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.0396676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049581Jy sigma=0.474108 ! Fit after self-cal, rms=0.049571Jy sigma=0.474088 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049571Jy sigma=0.474088 ! Fit after self-cal, rms=0.049909Jy sigma=0.474045 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=5.636 mas, bpa=-20.88 degrees ! Estimated noise=1.11395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341104 Jy ! Component: 100 - total flux cleaned = 0.000375136 Jy ! Component: 150 - total flux cleaned = 0.000390791 Jy ! Component: 200 - total flux cleaned = 0.000420713 Jy ! Total flux subtracted in 200 components = 0.000420713 Jy ! Clean residual min=-0.002598 max=0.002365 Jy/beam ! Clean residual mean=-0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0400883 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.0400883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049890Jy sigma=0.473988 ! Fit after self-cal, rms=0.049895Jy sigma=0.473977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.36565e-05 Jy ! Component: 100 - total flux cleaned = 3.29997e-05 Jy ! Component: 150 - total flux cleaned = 4.68789e-05 Jy ! Component: 200 - total flux cleaned = 6.00868e-05 Jy ! Total flux subtracted in 200 components = 6.00868e-05 Jy ! Clean residual min=-0.002597 max=0.002371 Jy/beam ! Clean residual mean=-0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0401484 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0401484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049882Jy sigma=0.473942 ! Fit after self-cal, rms=0.049876Jy sigma=0.473940 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049876Jy sigma=0.473940 ! Fit after self-cal, rms=0.050101Jy sigma=0.473931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=10.26 mas, bpa=-12.56 degrees ! Estimated noise=1.34556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199659 Jy ! Component: 100 - total flux cleaned = -0.000199252 Jy ! Component: 150 - total flux cleaned = -0.000188854 Jy ! Component: 200 - total flux cleaned = -0.000196248 Jy ! Total flux subtracted in 200 components = -0.000196248 Jy ! Clean residual min=-0.002515 max=0.003000 Jy/beam ! Clean residual mean=-0.000008 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0399522 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0399522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050104Jy sigma=0.473965 ! Fit after self-cal, rms=0.050105Jy sigma=0.473932 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266287 Jy ! Component: 100 - total flux cleaned = 0.00407598 Jy ! Component: 150 - total flux cleaned = 0.0047189 Jy ! Component: 200 - total flux cleaned = 0.00520743 Jy ! Total flux subtracted in 200 components = 0.00520743 Jy ! Clean residual min=-0.001917 max=0.001703 Jy/beam ! Clean residual mean=-0.000009 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0451596 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 66 components and 0.0451596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049992Jy sigma=0.472728 ! Fit after self-cal, rms=0.049959Jy sigma=0.472428 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=5.642 mas, bpa=-21.12 degrees ! Estimated noise=1.11853 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 5.642 at -21.12 degrees (North through East) ! Clean map min=-0.0023211 max=0.039278 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=4.443 mas, bpa=-26.09 degrees ! Estimated noise=2.13998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324823 Jy ! Component: 100 - total flux cleaned = 0.0385988 Jy ! Component: 150 - total flux cleaned = 0.0406915 Jy ! Component: 200 - total flux cleaned = 0.0421634 Jy ! Total flux subtracted in 200 components = 0.0421634 Jy ! Clean residual min=-0.004380 max=0.004649 Jy/beam ! Clean residual mean=-0.000002 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.0421634 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0421634 Jy ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=5.642 mas, bpa=-21.12 degrees ! Estimated noise=1.11853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219007 Jy ! Component: 100 - total flux cleaned = 0.00319877 Jy ! Component: 150 - total flux cleaned = 0.00350586 Jy ! Component: 200 - total flux cleaned = 0.00392141 Jy ! Total flux subtracted in 200 components = 0.00392141 Jy ! Clean residual min=-0.002348 max=0.002024 Jy/beam ! Clean residual mean=-0.000006 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0460848 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.0460848 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=10.26 mas, bpa=-12.56 degrees ! Estimated noise=1.34556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805276 Jy ! Component: 100 - total flux cleaned = 0.001071 Jy ! Component: 150 - total flux cleaned = 0.00107263 Jy ! Component: 200 - total flux cleaned = 0.00105046 Jy ! Total flux subtracted in 200 components = 0.00105046 Jy ! Clean residual min=-0.001852 max=0.001800 Jy/beam ! Clean residual mean=-0.000010 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0471352 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.00216e-05 Jy ! Component: 100 - total flux cleaned = -2.18246e-05 Jy ! Component: 150 - total flux cleaned = -2.27064e-05 Jy ! Component: 200 - total flux cleaned = -7.44877e-06 Jy ! Total flux subtracted in 200 components = -7.44877e-06 Jy ! Clean residual min=-0.001830 max=0.001755 Jy/beam ! Clean residual mean=-0.000009 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0471278 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 109 components and 0.0471278 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=5.642 mas, bpa=-21.12 degrees ! Estimated noise=1.11853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190872 Jy ! Component: 100 - total flux cleaned = 0.000152389 Jy ! Component: 150 - total flux cleaned = 0.000118126 Jy ! Component: 200 - total flux cleaned = 0.000150358 Jy ! Total flux subtracted in 200 components = 0.000150358 Jy ! Clean residual min=-0.002241 max=0.001755 Jy/beam ! Clean residual mean=-0.000005 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0472781 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 131 components and 0.0472782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049881Jy sigma=0.471459 ! Fit after self-cal, rms=0.049876Jy sigma=0.471107 wmodel /scr/pima/rv100_uvs/J1528+3816_S_map.mod ! Writing 131 model components to file: /scr/pima/rv100_uvs/J1528+3816_S_map.mod wobs /scr/pima/rv100_uvs/J1528+3816_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J1528+3816_S_uvs.fits wwins /scr/pima/rv100_uvs/J1528+3816_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv100_uvs/J1528+3816_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000603247 Jy ! Component: 100 - total flux cleaned = -0.000731301 Jy ! Component: 150 - total flux cleaned = -0.00066914 Jy ! Component: 200 - total flux cleaned = -0.000697351 Jy ! Component: 250 - total flux cleaned = -0.00072661 Jy ! Component: 300 - total flux cleaned = -0.000754611 Jy ! Component: 350 - total flux cleaned = -0.000675671 Jy ! Component: 400 - total flux cleaned = -0.000727354 Jy ! Component: 450 - total flux cleaned = -0.000702041 Jy ! Component: 500 - total flux cleaned = -0.000751264 Jy ! Component: 550 - total flux cleaned = -0.000871646 Jy ! Component: 600 - total flux cleaned = -0.00103602 Jy ! Component: 650 - total flux cleaned = -0.00122007 Jy ! Component: 700 - total flux cleaned = -0.0013331 Jy ! Component: 750 - total flux cleaned = -0.00153482 Jy ! Component: 800 - total flux cleaned = -0.0017119 Jy ! Component: 850 - total flux cleaned = -0.00188598 Jy ! Component: 900 - total flux cleaned = -0.00203652 Jy ! Component: 950 - total flux cleaned = -0.00222657 Jy ! Component: 1000 - total flux cleaned = -0.00235154 Jy ! Component: 1050 - total flux cleaned = -0.00245401 Jy ! Component: 1100 - total flux cleaned = -0.0025351 Jy ! Component: 1150 - total flux cleaned = -0.00263571 Jy ! Component: 1200 - total flux cleaned = -0.00271503 Jy ! Component: 1250 - total flux cleaned = -0.00281318 Jy ! Component: 1300 - total flux cleaned = -0.00290994 Jy ! Component: 1350 - total flux cleaned = -0.00298677 Jy ! Component: 1400 - total flux cleaned = -0.00308144 Jy ! Component: 1450 - total flux cleaned = -0.00313787 Jy ! Component: 1500 - total flux cleaned = -0.00323138 Jy ! Component: 1550 - total flux cleaned = -0.0032873 Jy ! Component: 1600 - total flux cleaned = -0.00339727 Jy ! Component: 1650 - total flux cleaned = -0.00343372 Jy ! Component: 1700 - total flux cleaned = -0.00346981 Jy ! Component: 1750 - total flux cleaned = -0.00354142 Jy ! Component: 1800 - total flux cleaned = -0.00359446 Jy ! Component: 1850 - total flux cleaned = -0.00362964 Jy ! Component: 1900 - total flux cleaned = -0.00366451 Jy ! Component: 1950 - total flux cleaned = -0.00364722 Jy ! Component: 2000 - total flux cleaned = -0.00373319 Jy ! Component: 2050 - total flux cleaned = -0.00371602 Jy ! Component: 2100 - total flux cleaned = -0.00369911 Jy ! Component: 2150 - total flux cleaned = -0.00371591 Jy ! Component: 2200 - total flux cleaned = -0.00374935 Jy ! Component: 2250 - total flux cleaned = -0.00371612 Jy ! Component: 2300 - total flux cleaned = -0.00373267 Jy ! Component: 2350 - total flux cleaned = -0.00374922 Jy ! Component: 2400 - total flux cleaned = -0.00376556 Jy ! Component: 2450 - total flux cleaned = -0.00376564 Jy ! Component: 2500 - total flux cleaned = -0.00381398 Jy ! Component: 2550 - total flux cleaned = -0.00382994 Jy ! Component: 2600 - total flux cleaned = -0.00384587 Jy ! Component: 2650 - total flux cleaned = -0.00384593 Jy ! Component: 2700 - total flux cleaned = -0.00387746 Jy ! Component: 2750 - total flux cleaned = -0.00389331 Jy ! Component: 2800 - total flux cleaned = -0.00390896 Jy ! Component: 2850 - total flux cleaned = -0.00393999 Jy ! Component: 2900 - total flux cleaned = -0.00397072 Jy ! Component: 2950 - total flux cleaned = -0.00394002 Jy ! Component: 3000 - total flux cleaned = -0.00397051 Jy ! Component: 3050 - total flux cleaned = -0.00395542 Jy ! Component: 3100 - total flux cleaned = -0.00391 Jy ! Component: 3150 - total flux cleaned = -0.00395516 Jy ! Component: 3200 - total flux cleaned = -0.00392529 Jy ! Component: 3250 - total flux cleaned = -0.00394021 Jy ! Component: 3300 - total flux cleaned = -0.00395512 Jy ! Component: 3350 - total flux cleaned = -0.00394042 Jy ! Component: 3400 - total flux cleaned = -0.00395518 Jy ! Component: 3450 - total flux cleaned = -0.00396991 Jy ! Component: 3500 - total flux cleaned = -0.0039989 Jy ! Component: 3550 - total flux cleaned = -0.00394123 Jy ! Component: 3600 - total flux cleaned = -0.00397011 Jy ! Component: 3650 - total flux cleaned = -0.00398438 Jy ! Component: 3700 - total flux cleaned = -0.0040128 Jy ! Component: 3750 - total flux cleaned = -0.00399863 Jy ! Component: 3800 - total flux cleaned = -0.00395639 Jy ! Component: 3850 - total flux cleaned = -0.0039985 Jy ! Component: 3900 - total flux cleaned = -0.00398463 Jy ! Component: 3950 - total flux cleaned = -0.00399865 Jy ! Component: 4000 - total flux cleaned = -0.00401245 Jy ! Component: 4050 - total flux cleaned = -0.00402621 Jy ! Total flux subtracted in 4096 components = -0.0039987 Jy ! Clean residual min=-0.000881 max=0.000710 Jy/beam ! Clean residual mean=-0.000005 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0432795 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 360 components and 0.0432795 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J1528+3816_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.883 x 5.642 at -21.12 degrees (North through East) ! Clean map min=-0.0022766 max=0.039141 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1528+3816_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0391405 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230344 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.76552 1.76552 3.53104 7.06207 14.1241 28.2483 56.4966 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.039 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 169.921 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J1528+3816_S_uvs.log closed on Mon Feb 29 13:28:26 2016