! Started logfile: /scr/pima/rv100_uvs/J1434+1952_X_uvs.log on Mon Feb 29 13:27:59 2016 obs /scr/pima/rv100_uvs/J1434+1952_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J1434+1952_X_uva.fits ! AN table 1: 54 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.820106 visibilities/baseline/integration-bin. ! Found source: J1434+1952 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4960 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1434+1952_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.061815Jy sigma=15.600947 ! Fit after self-cal, rms=0.658029Jy sigma=9.808854 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6787 mas, bmaj=1.617 mas, bpa=6.504 degrees ! Estimated noise=1.2976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.264163 Jy ! Component: 100 - total flux cleaned = 0.324172 Jy ! Total flux subtracted in 100 components = 0.324172 Jy ! Clean residual min=-0.010646 max=0.021801 Jy/beam ! Clean residual mean=0.000003 rms=0.002679 Jy/beam ! Combined flux in latest and established models = 0.324172 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.324172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068893Jy sigma=0.975241 ! Fit after self-cal, rms=0.068882Jy sigma=0.975137 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224201 Jy ! Component: 100 - total flux cleaned = 0.0312163 Jy ! Total flux subtracted in 100 components = 0.0312163 Jy ! Clean residual min=-0.007535 max=0.010310 Jy/beam ! Clean residual mean=0.000003 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.355388 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.355388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060857Jy sigma=0.847450 ! Fit after self-cal, rms=0.060819Jy sigma=0.846931 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.841 mas, bmaj=2.005 mas, bpa=3.47 degrees ! Estimated noise=0.751771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113772 Jy ! Component: 100 - total flux cleaned = 0.0175276 Jy ! Component: 150 - total flux cleaned = 0.0215654 Jy ! Component: 200 - total flux cleaned = 0.0238753 Jy ! Total flux subtracted in 200 components = 0.0238753 Jy ! Clean residual min=-0.005622 max=0.005781 Jy/beam ! Clean residual mean=0.000007 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.379264 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.379264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058542Jy sigma=0.812121 ! Fit after self-cal, rms=0.058336Jy sigma=0.809041 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.841 x 2.005 at 3.47 degrees (North through East) ! Clean map min=-0.0054061 max=0.34156 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 0.96 LA 1.02 MK 1.02 ! NL 1.00 OV 1.01 PT 1.01 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.96 LA 1.02 MK 1.00 ! NL 1.00 OV 1.01 PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 0.94 LA 1.02 MK 1.01 ! NL 1.01 OV 1.01 PT 1.01 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.94 LA 1.01 MK 1.03 ! NL 0.99 OV 1.01 PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.058336Jy sigma=0.809041 ! Fit after self-cal, rms=0.056866Jy sigma=0.791453 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8424 mas, bmaj=1.999 mas, bpa=3.775 degrees ! Estimated noise=0.74891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445688 Jy ! Component: 100 - total flux cleaned = 0.006084 Jy ! Component: 150 - total flux cleaned = 0.00658141 Jy ! Component: 200 - total flux cleaned = 0.00697939 Jy ! Total flux subtracted in 200 components = 0.00697939 Jy ! Clean residual min=-0.003179 max=0.003419 Jy/beam ! Clean residual mean=0.000004 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.386243 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 53 components and 0.386243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056445Jy sigma=0.784841 ! Fit after self-cal, rms=0.056395Jy sigma=0.784345 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056395Jy sigma=0.784345 ! Fit after self-cal, rms=0.055996Jy sigma=0.778640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8426 mas, bmaj=1.998 mas, bpa=3.763 degrees ! Estimated noise=0.748096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198145 Jy ! Component: 100 - total flux cleaned = 0.00279167 Jy ! Component: 150 - total flux cleaned = 0.00324339 Jy ! Component: 200 - total flux cleaned = 0.00347106 Jy ! Total flux subtracted in 200 components = 0.00347106 Jy ! Clean residual min=-0.002766 max=0.002586 Jy/beam ! Clean residual mean=-0.000000 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.389714 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.389714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055876Jy sigma=0.777042 ! Fit after self-cal, rms=0.055856Jy sigma=0.776740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000323528 Jy ! Component: 100 - total flux cleaned = 0.000677487 Jy ! Component: 150 - total flux cleaned = 0.000647252 Jy ! Component: 200 - total flux cleaned = 0.00061873 Jy ! Total flux subtracted in 200 components = 0.00061873 Jy ! Clean residual min=-0.002687 max=0.002555 Jy/beam ! Clean residual mean=-0.000000 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.390333 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.390333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055802Jy sigma=0.776109 ! Fit after self-cal, rms=0.055788Jy sigma=0.775981 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055788Jy sigma=0.775981 ! Fit after self-cal, rms=0.055789Jy sigma=0.775821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8425 mas, bmaj=1.997 mas, bpa=3.782 degrees ! Estimated noise=0.748153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000887458 Jy ! Component: 100 - total flux cleaned = 0.00116239 Jy ! Component: 150 - total flux cleaned = 0.0013034 Jy ! Component: 200 - total flux cleaned = 0.00135419 Jy ! Total flux subtracted in 200 components = 0.00135419 Jy ! Clean residual min=-0.002572 max=0.002501 Jy/beam ! Clean residual mean=-0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.391687 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.391687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055747Jy sigma=0.775315 ! Fit after self-cal, rms=0.055739Jy sigma=0.775225 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307137 Jy ! Component: 100 - total flux cleaned = 0.000414503 Jy ! Component: 150 - total flux cleaned = 0.000509487 Jy ! Component: 200 - total flux cleaned = 0.000531272 Jy ! Total flux subtracted in 200 components = 0.000531272 Jy ! Clean residual min=-0.002532 max=0.002475 Jy/beam ! Clean residual mean=-0.000001 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.392218 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.392218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055713Jy sigma=0.774929 ! Fit after self-cal, rms=0.055708Jy sigma=0.774885 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055708Jy sigma=0.774885 ! Fit after self-cal, rms=0.055720Jy sigma=0.774812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.943 mas, bmaj=3.814 mas, bpa=-2.582 degrees ! Estimated noise=1.01308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114587 Jy ! Component: 100 - total flux cleaned = 0.00164809 Jy ! Component: 150 - total flux cleaned = 0.00184525 Jy ! Component: 200 - total flux cleaned = 0.00194707 Jy ! Total flux subtracted in 200 components = 0.00194707 Jy ! Clean residual min=-0.002236 max=0.002524 Jy/beam ! Clean residual mean=-0.000002 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.394165 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.394165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055706Jy sigma=0.774647 ! Fit after self-cal, rms=0.055703Jy sigma=0.774584 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.15677e-05 Jy ! Component: 100 - total flux cleaned = 0.00020012 Jy ! Component: 150 - total flux cleaned = 0.000253784 Jy ! Component: 200 - total flux cleaned = 0.000349857 Jy ! Total flux subtracted in 200 components = 0.000349857 Jy ! Clean residual min=-0.002205 max=0.002503 Jy/beam ! Clean residual mean=-0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.394515 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 114 components and 0.394515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055696Jy sigma=0.774542 ! Fit after self-cal, rms=0.055693Jy sigma=0.774499 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8425 mas, bmaj=1.997 mas, bpa=3.79 degrees ! Estimated noise=0.748362 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8425 x 1.997 at 3.79 degrees (North through East) ! Clean map min=-0.0021513 max=0.34031 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6798 mas, bmaj=1.613 mas, bpa=6.872 degrees ! Estimated noise=1.29301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263132 Jy ! Component: 100 - total flux cleaned = 0.322678 Jy ! Component: 150 - total flux cleaned = 0.345712 Jy ! Component: 200 - total flux cleaned = 0.35868 Jy ! Total flux subtracted in 200 components = 0.35868 Jy ! Clean residual min=-0.005800 max=0.006391 Jy/beam ! Clean residual mean=-0.000001 rms=0.001392 Jy/beam ! Combined flux in latest and established models = 0.35868 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.35868 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8425 mas, bmaj=1.997 mas, bpa=3.79 degrees ! Estimated noise=0.748362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00936866 Jy ! Component: 100 - total flux cleaned = 0.0150961 Jy ! Component: 150 - total flux cleaned = 0.0194708 Jy ! Component: 200 - total flux cleaned = 0.0229092 Jy ! Total flux subtracted in 200 components = 0.0229092 Jy ! Clean residual min=-0.002849 max=0.002875 Jy/beam ! Clean residual mean=-0.000001 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.381589 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 37 components and 0.381589 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.943 mas, bmaj=3.814 mas, bpa=-2.582 degrees ! Estimated noise=1.01308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487764 Jy ! Component: 100 - total flux cleaned = 0.00773779 Jy ! Component: 150 - total flux cleaned = 0.00955351 Jy ! Component: 200 - total flux cleaned = 0.0107273 Jy ! Total flux subtracted in 200 components = 0.0107273 Jy ! Clean residual min=-0.002649 max=0.002558 Jy/beam ! Clean residual mean=-0.000002 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.392316 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464966 Jy ! Component: 100 - total flux cleaned = 0.000774088 Jy ! Component: 150 - total flux cleaned = 0.00105163 Jy ! Component: 200 - total flux cleaned = 0.00127332 Jy ! Total flux subtracted in 200 components = 0.00127332 Jy ! Clean residual min=-0.002502 max=0.002372 Jy/beam ! Clean residual mean=-0.000002 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.39359 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 72 components and 0.39359 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8425 mas, bmaj=1.997 mas, bpa=3.79 degrees ! Estimated noise=0.748362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388032 Jy ! Component: 100 - total flux cleaned = -0.000431503 Jy ! Component: 150 - total flux cleaned = -0.000469743 Jy ! Component: 200 - total flux cleaned = -0.000433652 Jy ! Total flux subtracted in 200 components = -0.000433652 Jy ! Clean residual min=-0.002546 max=0.002488 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.393156 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.393156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055721Jy sigma=0.775018 ! Fit after self-cal, rms=0.055701Jy sigma=0.774772 wmodel /scr/pima/rv100_uvs/J1434+1952_X_map.mod ! Writing 88 model components to file: /scr/pima/rv100_uvs/J1434+1952_X_map.mod wobs /scr/pima/rv100_uvs/J1434+1952_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J1434+1952_X_uvs.fits wwins /scr/pima/rv100_uvs/J1434+1952_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J1434+1952_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.27693e-05 Jy ! Component: 100 - total flux cleaned = 3.16549e-05 Jy ! Component: 150 - total flux cleaned = -0.000150286 Jy ! Component: 200 - total flux cleaned = -0.000252484 Jy ! Component: 250 - total flux cleaned = -0.00048149 Jy ! Component: 300 - total flux cleaned = -0.000640523 Jy ! Component: 350 - total flux cleaned = -0.00085743 Jy ! Component: 400 - total flux cleaned = -0.000977683 Jy ! Component: 450 - total flux cleaned = -0.00103562 Jy ! Component: 500 - total flux cleaned = -0.0010352 Jy ! Component: 550 - total flux cleaned = -0.00109143 Jy ! Component: 600 - total flux cleaned = -0.00117371 Jy ! Component: 650 - total flux cleaned = -0.00125393 Jy ! Component: 700 - total flux cleaned = -0.00122747 Jy ! Component: 750 - total flux cleaned = -0.00122799 Jy ! Component: 800 - total flux cleaned = -0.00120272 Jy ! Component: 850 - total flux cleaned = -0.00122809 Jy ! Component: 900 - total flux cleaned = -0.00107995 Jy ! Component: 950 - total flux cleaned = -0.00100745 Jy ! Component: 1000 - total flux cleaned = -0.000911802 Jy ! Component: 1050 - total flux cleaned = -0.000911907 Jy ! Component: 1100 - total flux cleaned = -0.000794265 Jy ! Component: 1150 - total flux cleaned = -0.000702025 Jy ! Component: 1200 - total flux cleaned = -0.000679211 Jy ! Component: 1250 - total flux cleaned = -0.000611971 Jy ! Component: 1300 - total flux cleaned = -0.000612148 Jy ! Component: 1350 - total flux cleaned = -0.000633861 Jy ! Component: 1400 - total flux cleaned = -0.000612008 Jy ! Component: 1450 - total flux cleaned = -0.000633759 Jy ! Component: 1500 - total flux cleaned = -0.000570256 Jy ! Component: 1550 - total flux cleaned = -0.000633072 Jy ! Component: 1600 - total flux cleaned = -0.000529307 Jy ! Component: 1650 - total flux cleaned = -0.000488467 Jy ! Component: 1700 - total flux cleaned = -0.000447988 Jy ! Component: 1750 - total flux cleaned = -0.000468495 Jy ! Component: 1800 - total flux cleaned = -0.000488155 Jy ! Component: 1850 - total flux cleaned = -0.000468293 Jy ! Component: 1900 - total flux cleaned = -0.000409452 Jy ! Component: 1950 - total flux cleaned = -0.000332259 Jy ! Component: 2000 - total flux cleaned = -0.000447267 Jy ! Component: 2050 - total flux cleaned = -0.000504059 Jy ! Component: 2100 - total flux cleaned = -0.000485033 Jy ! Component: 2150 - total flux cleaned = -0.000466503 Jy ! Component: 2200 - total flux cleaned = -0.000577646 Jy ! Component: 2250 - total flux cleaned = -0.000577659 Jy ! Component: 2300 - total flux cleaned = -0.000523174 Jy ! Component: 2350 - total flux cleaned = -0.000540978 Jy ! Component: 2400 - total flux cleaned = -0.000505013 Jy ! Component: 2450 - total flux cleaned = -0.00055834 Jy ! Component: 2500 - total flux cleaned = -0.000470276 Jy ! Component: 2550 - total flux cleaned = -0.000452645 Jy ! Component: 2600 - total flux cleaned = -0.000452857 Jy ! Component: 2650 - total flux cleaned = -0.000418175 Jy ! Component: 2700 - total flux cleaned = -0.000349615 Jy ! Component: 2750 - total flux cleaned = -0.00038387 Jy ! Component: 2800 - total flux cleaned = -0.000248521 Jy ! Component: 2850 - total flux cleaned = -0.00021502 Jy ! Component: 2900 - total flux cleaned = -0.000265185 Jy ! Component: 2950 - total flux cleaned = -0.000198758 Jy ! Component: 3000 - total flux cleaned = -0.000149378 Jy ! Component: 3050 - total flux cleaned = -5.12653e-05 Jy ! Component: 3100 - total flux cleaned = -3.51215e-05 Jy ! Component: 3150 - total flux cleaned = 2.94829e-05 Jy ! Component: 3200 - total flux cleaned = 9.36656e-05 Jy ! Component: 3250 - total flux cleaned = 0.00015755 Jy ! Component: 3300 - total flux cleaned = 0.000252893 Jy ! Component: 3350 - total flux cleaned = 0.000378763 Jy ! Component: 3400 - total flux cleaned = 0.000394316 Jy ! Component: 3450 - total flux cleaned = 0.0004256 Jy ! Component: 3500 - total flux cleaned = 0.000456814 Jy ! Component: 3550 - total flux cleaned = 0.000549365 Jy ! Component: 3600 - total flux cleaned = 0.000580212 Jy ! Component: 3650 - total flux cleaned = 0.00064135 Jy ! Component: 3700 - total flux cleaned = 0.00076263 Jy ! Component: 3750 - total flux cleaned = 0.000807818 Jy ! Component: 3800 - total flux cleaned = 0.000852756 Jy ! Component: 3850 - total flux cleaned = 0.000867565 Jy ! Component: 3900 - total flux cleaned = 0.00091227 Jy ! Component: 3950 - total flux cleaned = 0.000941904 Jy ! Component: 4000 - total flux cleaned = 0.000986052 Jy ! Component: 4050 - total flux cleaned = 0.00102998 Jy ! Total flux subtracted in 4096 components = 0.00108829 Jy ! Clean residual min=-0.001050 max=0.000843 Jy/beam ! Clean residual mean=-0.000001 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.394244 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 360 components and 0.394244 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J1434+1952_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8425 x 1.997 at 3.79 degrees (North through East) ! Clean map min=-0.001503 max=0.33866 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1434+1952_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.338655 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241105 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.213585 0.213585 0.427169 0.854339 1.70868 3.41735 6.83471 13.6694 27.3388 54.6777 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.338 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1404.59 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J1434+1952_X_uvs.log closed on Mon Feb 29 13:28:03 2016