! Started logfile: /scr/pima/rv100_uvs/J1422-2308_S_uvs.log on Mon Feb 29 13:28:01 2016 obs /scr/pima/rv100_uvs/J1422-2308_S_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J1422-2308_S_uva.fits ! AN table 1: 44 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.982143 visibilities/baseline/integration-bin. ! Found source: J1422-2308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4840 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1422-2308_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.004183Jy sigma=6.576328 ! Fit after self-cal, rms=0.921304Jy sigma=6.008371 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=5.982 mas, bpa=-3.821 degrees ! Estimated noise=2.88396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060612 Jy ! Component: 100 - total flux cleaned = 0.0751113 Jy ! Total flux subtracted in 100 components = 0.0751113 Jy ! Clean residual min=-0.005365 max=0.006645 Jy/beam ! Clean residual mean=-0.000034 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 0.0751113 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0751113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070899Jy sigma=0.434054 ! Fit after self-cal, rms=0.070525Jy sigma=0.432221 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.588 mas, bpa=-6.564 degrees ! Estimated noise=1.64346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108216 Jy ! Component: 100 - total flux cleaned = 0.0158824 Jy ! Component: 150 - total flux cleaned = 0.0186692 Jy ! Component: 200 - total flux cleaned = 0.0195942 Jy ! Total flux subtracted in 200 components = 0.0195942 Jy ! Clean residual min=-0.003666 max=0.007503 Jy/beam ! Clean residual mean=-0.000049 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.0947055 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.0947055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069248Jy sigma=0.419642 ! Fit after self-cal, rms=0.069248Jy sigma=0.419382 ! Inverting map ! Added new window around map position (-6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00670914 Jy ! Component: 100 - total flux cleaned = 0.00961642 Jy ! Component: 150 - total flux cleaned = 0.0104367 Jy ! Component: 200 - total flux cleaned = 0.0106157 Jy ! Total flux subtracted in 200 components = 0.0106157 Jy ! Clean residual min=-0.003202 max=0.003602 Jy/beam ! Clean residual mean=-0.000023 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.105321 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 0.105321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068671Jy sigma=0.414919 ! Fit after self-cal, rms=0.068523Jy sigma=0.414098 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.778 x 7.588 at -6.564 degrees (North through East) ! Clean map min=-0.002778 max=0.080942 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.03 KP 0.96 LA 0.96 MK 1.05 ! NL 1.05 OV 1.03 PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 1.01 LA 0.99 MK 0.98 ! NL 1.00 OV 1.02 PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.16 KP 0.98 LA 0.94 MK 1.03 ! NL 0.93 OV 1.04 PT 0.98 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.11 KP 0.98 LA 0.97 MK 0.88 ! NL 1.01 OV 0.93 PT 1.02 SC 0.88 ! ! ! Fit before self-cal, rms=0.068523Jy sigma=0.414098 ! Fit after self-cal, rms=0.067688Jy sigma=0.412485 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.475 mas, bpa=-6.065 degrees ! Estimated noise=1.62067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160264 Jy ! Component: 100 - total flux cleaned = 0.00160429 Jy ! Component: 150 - total flux cleaned = 0.00156679 Jy ! Component: 200 - total flux cleaned = 0.00153422 Jy ! Total flux subtracted in 200 components = 0.00153422 Jy ! Clean residual min=-0.002733 max=0.002517 Jy/beam ! Clean residual mean=-0.000013 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.106855 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.106855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067611Jy sigma=0.411955 ! Fit after self-cal, rms=0.067617Jy sigma=0.411823 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067617Jy sigma=0.411823 ! Fit after self-cal, rms=0.067524Jy sigma=0.411664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7.463 mas, bpa=-5.755 degrees ! Estimated noise=1.61151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870415 Jy ! Component: 100 - total flux cleaned = 0.00118795 Jy ! Component: 150 - total flux cleaned = 0.00143455 Jy ! Component: 200 - total flux cleaned = 0.00161635 Jy ! Total flux subtracted in 200 components = 0.00161635 Jy ! Clean residual min=-0.002611 max=0.002451 Jy/beam ! Clean residual mean=-0.000013 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.108472 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 85 components and 0.108472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067475Jy sigma=0.411382 ! Fit after self-cal, rms=0.067472Jy sigma=0.411292 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380993 Jy ! Component: 100 - total flux cleaned = 0.000500794 Jy ! Component: 150 - total flux cleaned = 0.000563562 Jy ! Component: 200 - total flux cleaned = 0.000620404 Jy ! Total flux subtracted in 200 components = 0.000620404 Jy ! Clean residual min=-0.002612 max=0.002428 Jy/beam ! Clean residual mean=-0.000011 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.109092 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 93 components and 0.109092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067456Jy sigma=0.411200 ! Fit after self-cal, rms=0.067454Jy sigma=0.411189 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067454Jy sigma=0.411189 ! Fit after self-cal, rms=0.067081Jy sigma=0.411143 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=7.463 mas, bpa=-5.546 degrees ! Estimated noise=1.60139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013224 Jy ! Component: 100 - total flux cleaned = 0.00037069 Jy ! Component: 150 - total flux cleaned = 0.000545371 Jy ! Component: 200 - total flux cleaned = 0.000673794 Jy ! Total flux subtracted in 200 components = 0.000673794 Jy ! Clean residual min=-0.002566 max=0.002354 Jy/beam ! Clean residual mean=-0.000012 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.109766 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.109766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067051Jy sigma=0.411027 ! Fit after self-cal, rms=0.067053Jy sigma=0.411013 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186088 Jy ! Component: 100 - total flux cleaned = 0.000264753 Jy ! Component: 150 - total flux cleaned = 0.000332306 Jy ! Component: 200 - total flux cleaned = 0.000378851 Jy ! Total flux subtracted in 200 components = 0.000378851 Jy ! Clean residual min=-0.002566 max=0.002326 Jy/beam ! Clean residual mean=-0.000011 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.110145 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 108 components and 0.110145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067042Jy sigma=0.410963 ! Fit after self-cal, rms=0.067043Jy sigma=0.410956 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067043Jy sigma=0.410956 ! Fit after self-cal, rms=0.066627Jy sigma=0.410954 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.853 mas, bmaj=18.16 mas, bpa=-3.866 degrees ! Estimated noise=2.07563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000992402 Jy ! Component: 100 - total flux cleaned = 0.00105512 Jy ! Component: 150 - total flux cleaned = 0.00108716 Jy ! Component: 200 - total flux cleaned = 0.0010875 Jy ! Total flux subtracted in 200 components = 0.0010875 Jy ! Clean residual min=-0.002636 max=0.002371 Jy/beam ! Clean residual mean=-0.000026 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.111232 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 116 components and 0.111232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066628Jy sigma=0.410950 ! Fit after self-cal, rms=0.066627Jy sigma=0.410936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290745 Jy ! Component: 100 - total flux cleaned = 0.000304155 Jy ! Component: 150 - total flux cleaned = 0.000316671 Jy ! Component: 200 - total flux cleaned = 0.000316274 Jy ! Total flux subtracted in 200 components = 0.000316274 Jy ! Clean residual min=-0.002606 max=0.002268 Jy/beam ! Clean residual mean=-0.000024 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.111549 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 120 components and 0.111549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066629Jy sigma=0.410954 ! Fit after self-cal, rms=0.066630Jy sigma=0.410950 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=7.466 mas, bpa=-5.361 degrees ! Estimated noise=1.59312 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.761 x 7.466 at -5.361 degrees (North through East) ! Clean map min=-0.0024432 max=0.078233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.208 mas, bmaj=5.929 mas, bpa=-2.46 degrees ! Estimated noise=2.75823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578321 Jy ! Component: 100 - total flux cleaned = 0.072499 Jy ! Component: 150 - total flux cleaned = 0.0807445 Jy ! Component: 200 - total flux cleaned = 0.0863765 Jy ! Total flux subtracted in 200 components = 0.0863765 Jy ! Clean residual min=-0.004682 max=0.004686 Jy/beam ! Clean residual mean=-0.000023 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0863765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0863765 Jy ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=7.466 mas, bpa=-5.361 degrees ! Estimated noise=1.59312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780155 Jy ! Component: 100 - total flux cleaned = 0.0126922 Jy ! Component: 150 - total flux cleaned = 0.0160726 Jy ! Component: 200 - total flux cleaned = 0.0184927 Jy ! Total flux subtracted in 200 components = 0.0184927 Jy ! Clean residual min=-0.002728 max=0.002627 Jy/beam ! Clean residual mean=-0.000026 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.104869 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 46 components and 0.104869 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.853 mas, bmaj=18.16 mas, bpa=-3.866 degrees ! Estimated noise=2.07563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314304 Jy ! Component: 100 - total flux cleaned = 0.00490154 Jy ! Component: 150 - total flux cleaned = 0.00590782 Jy ! Component: 200 - total flux cleaned = 0.0061534 Jy ! Total flux subtracted in 200 components = 0.0061534 Jy ! Clean residual min=-0.002753 max=0.002420 Jy/beam ! Clean residual mean=-0.000028 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.111023 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113904 Jy ! Component: 100 - total flux cleaned = 0.000211848 Jy ! Component: 150 - total flux cleaned = 0.000281317 Jy ! Component: 200 - total flux cleaned = 0.000358481 Jy ! Total flux subtracted in 200 components = 0.000358481 Jy ! Clean residual min=-0.002700 max=0.002338 Jy/beam ! Clean residual mean=-0.000025 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.111381 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 76 components and 0.111381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.761 mas, bmaj=7.466 mas, bpa=-5.361 degrees ! Estimated noise=1.59312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000844069 Jy ! Component: 100 - total flux cleaned = -0.000924987 Jy ! Component: 150 - total flux cleaned = -0.000958849 Jy ! Component: 200 - total flux cleaned = -0.000989284 Jy ! Total flux subtracted in 200 components = -0.000989284 Jy ! Clean residual min=-0.002663 max=0.002376 Jy/beam ! Clean residual mean=-0.000012 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.110392 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 86 components and 0.110392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066635Jy sigma=0.411066 ! Fit after self-cal, rms=0.066645Jy sigma=0.411020 wmodel /scr/pima/rv100_uvs/J1422-2308_S_map.mod ! Writing 86 model components to file: /scr/pima/rv100_uvs/J1422-2308_S_map.mod wobs /scr/pima/rv100_uvs/J1422-2308_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J1422-2308_S_uvs.fits wwins /scr/pima/rv100_uvs/J1422-2308_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rv100_uvs/J1422-2308_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522448 Jy ! Component: 100 - total flux cleaned = -0.000850218 Jy ! Component: 150 - total flux cleaned = -0.001194 Jy ! Component: 200 - total flux cleaned = -0.00152352 Jy ! Component: 250 - total flux cleaned = -0.00180637 Jy ! Component: 300 - total flux cleaned = -0.00211307 Jy ! Component: 350 - total flux cleaned = -0.00218029 Jy ! Component: 400 - total flux cleaned = -0.00240487 Jy ! Component: 450 - total flux cleaned = -0.00249781 Jy ! Component: 500 - total flux cleaned = -0.00264789 Jy ! Component: 550 - total flux cleaned = -0.00279354 Jy ! Component: 600 - total flux cleaned = -0.00279345 Jy ! Component: 650 - total flux cleaned = -0.0028771 Jy ! Component: 700 - total flux cleaned = -0.00301204 Jy ! Component: 750 - total flux cleaned = -0.00324969 Jy ! Component: 800 - total flux cleaned = -0.00343077 Jy ! Component: 850 - total flux cleaned = -0.00353242 Jy ! Component: 900 - total flux cleaned = -0.00358259 Jy ! Component: 950 - total flux cleaned = -0.00370561 Jy ! Component: 1000 - total flux cleaned = -0.00375356 Jy ! Component: 1050 - total flux cleaned = -0.00384857 Jy ! Component: 1100 - total flux cleaned = -0.00391829 Jy ! Component: 1150 - total flux cleaned = -0.00400983 Jy ! Component: 1200 - total flux cleaned = -0.00407783 Jy ! Component: 1250 - total flux cleaned = -0.0041003 Jy ! Component: 1300 - total flux cleaned = -0.00425407 Jy ! Component: 1350 - total flux cleaned = -0.0042753 Jy ! Component: 1400 - total flux cleaned = -0.00436053 Jy ! Component: 1450 - total flux cleaned = -0.00440276 Jy ! Component: 1500 - total flux cleaned = -0.00446576 Jy ! Component: 1550 - total flux cleaned = -0.00448703 Jy ! Component: 1600 - total flux cleaned = -0.00452811 Jy ! Component: 1650 - total flux cleaned = -0.00464923 Jy ! Component: 1700 - total flux cleaned = -0.00458922 Jy ! Component: 1750 - total flux cleaned = -0.00458921 Jy ! Component: 1800 - total flux cleaned = -0.00458928 Jy ! Component: 1850 - total flux cleaned = -0.00455064 Jy ! Component: 1900 - total flux cleaned = -0.00456994 Jy ! Component: 1950 - total flux cleaned = -0.00456985 Jy ! Component: 2000 - total flux cleaned = -0.00456987 Jy ! Component: 2050 - total flux cleaned = -0.00455107 Jy ! Component: 2100 - total flux cleaned = -0.00449527 Jy ! Component: 2150 - total flux cleaned = -0.00449532 Jy ! Component: 2200 - total flux cleaned = -0.00447701 Jy ! Component: 2250 - total flux cleaned = -0.00440484 Jy ! Component: 2300 - total flux cleaned = -0.00436903 Jy ! Component: 2350 - total flux cleaned = -0.00436899 Jy ! Component: 2400 - total flux cleaned = -0.00435126 Jy ! Component: 2450 - total flux cleaned = -0.00435134 Jy ! Component: 2500 - total flux cleaned = -0.00429918 Jy ! Component: 2550 - total flux cleaned = -0.00433382 Jy ! Component: 2600 - total flux cleaned = -0.00426536 Jy ! Component: 2650 - total flux cleaned = -0.00424847 Jy ! Component: 2700 - total flux cleaned = -0.00424855 Jy ! Component: 2750 - total flux cleaned = -0.00428172 Jy ! Component: 2800 - total flux cleaned = -0.0041652 Jy ! Component: 2850 - total flux cleaned = -0.00424803 Jy ! Component: 2900 - total flux cleaned = -0.00419876 Jy ! Component: 2950 - total flux cleaned = -0.00416612 Jy ! Component: 3000 - total flux cleaned = -0.00414998 Jy ! Component: 3050 - total flux cleaned = -0.00414994 Jy ! Component: 3100 - total flux cleaned = -0.00414989 Jy ! Component: 3150 - total flux cleaned = -0.00416576 Jy ! Component: 3200 - total flux cleaned = -0.00410234 Jy ! Component: 3250 - total flux cleaned = -0.00408649 Jy ! Component: 3300 - total flux cleaned = -0.00402395 Jy ! Component: 3350 - total flux cleaned = -0.00400837 Jy ! Component: 3400 - total flux cleaned = -0.00394646 Jy ! Component: 3450 - total flux cleaned = -0.00393101 Jy ! Component: 3500 - total flux cleaned = -0.00394616 Jy ! Component: 3550 - total flux cleaned = -0.00390061 Jy ! Component: 3600 - total flux cleaned = -0.00387035 Jy ! Component: 3650 - total flux cleaned = -0.00385527 Jy ! Component: 3700 - total flux cleaned = -0.00376531 Jy ! Component: 3750 - total flux cleaned = -0.00376541 Jy ! Component: 3800 - total flux cleaned = -0.00369118 Jy ! Component: 3850 - total flux cleaned = -0.00369132 Jy ! Component: 3900 - total flux cleaned = -0.00364716 Jy ! Component: 3950 - total flux cleaned = -0.00367647 Jy ! Component: 4000 - total flux cleaned = -0.0035892 Jy ! Component: 4050 - total flux cleaned = -0.00357474 Jy ! Total flux subtracted in 4096 components = -0.00354578 Jy ! Clean residual min=-0.000937 max=0.000927 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.106846 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 370 components and 0.106846 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J1422-2308_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.761 x 7.466 at -5.361 degrees (North through East) ! Clean map min=-0.0015768 max=0.077072 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1422-2308_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0770717 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243956 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.949595 0.949595 1.89919 3.79838 7.59676 15.1935 30.387 60.7741 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.077 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 315.924 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J1422-2308_S_uvs.log closed on Mon Feb 29 13:28:05 2016