! Started logfile: /scr/pima/rv100_uvs/J1342-2900_S_uvs.log on Mon Feb 29 13:27:48 2016
obs /scr/pima/rv100_uvs/J1342-2900_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J1342-2900_S_uva.fits
! AN table 1: 59 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.549031 visibilities/baseline/integration-bin.
! Found source: J1342-2900
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3628 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1342-2900_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 142 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 142 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 142 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 142 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007293Jy  sigma=7.067345
! Fit after  self-cal, rms=0.812307Jy  sigma=5.707499
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.547 mas, bmaj=7.947 mas, bpa=0.4376 degrees
! Estimated noise=3.05091 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146696 Jy
! Component: 100  -  total flux cleaned = 0.178708 Jy
! Total flux subtracted in 100 components = 0.178708 Jy
! Clean residual min=-0.009871 max=0.009546 Jy/beam
! Clean residual mean=-0.000027 rms=0.001995 Jy/beam
! Combined flux in latest and established models = 0.178708 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.178708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074173Jy  sigma=0.492930
! Fit after  self-cal, rms=0.074164Jy  sigma=0.492903
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.193 mas, bmaj=9.773 mas, bpa=-1.859 degrees
! Estimated noise=1.75065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131458 Jy
! Component: 100  -  total flux cleaned = 0.0191968 Jy
! Component: 150  -  total flux cleaned = 0.0221778 Jy
! Component: 200  -  total flux cleaned = 0.0236716 Jy
! Total flux subtracted in 200 components = 0.0236716 Jy
! Clean residual min=-0.004323 max=0.007956 Jy/beam
! Clean residual mean=0.000019 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.202379 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 24 components and 0.202379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072432Jy  sigma=0.474189
! Fit after  self-cal, rms=0.072448Jy  sigma=0.474136
! Inverting map 
! Added new window around map position (-14, 47.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00641502 Jy
! Component: 100  -  total flux cleaned = 0.00747357 Jy
! Component: 150  -  total flux cleaned = 0.00806108 Jy
! Component: 200  -  total flux cleaned = 0.00862174 Jy
! Total flux subtracted in 200 components = 0.00862174 Jy
! Clean residual min=-0.004013 max=0.005109 Jy/beam
! Clean residual mean=0.000032 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.211001 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 46 components and 0.211001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071685Jy  sigma=0.469123
! Fit after  self-cal, rms=0.071672Jy  sigma=0.468655
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.193 x 9.773 at -1.859 degrees (North through East)
! Clean map  min=-0.0036648  max=0.18733 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.13     KP        0.95     LA        0.99     MK        1.04     
!   NL        1.07     OV        1.00     PT        1.01     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.02     KP        1.01     LA        1.02     MK        1.00     
!   NL        1.09     OV        0.96     PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.11     KP        0.99     LA        0.97     MK        0.98     
!   NL        1.07     OV        0.99     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.04     KP        0.96     LA        0.98     MK        0.97     
!   NL        1.10     OV        0.98     PT        1.02     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.071672Jy  sigma=0.468655
! Fit after  self-cal, rms=0.072955Jy  sigma=0.463770
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=9.718 mas, bpa=-1.59 degrees
! Estimated noise=1.76604 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0022905 Jy
! Component: 100  -  total flux cleaned = -0.00259178 Jy
! Component: 150  -  total flux cleaned = -0.00277161 Jy
! Component: 200  -  total flux cleaned = -0.00294046 Jy
! Total flux subtracted in 200 components = -0.00294046 Jy
! Clean residual min=-0.003724 max=0.003656 Jy/beam
! Clean residual mean=0.000034 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.208061 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.208061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072865Jy  sigma=0.463012
! Fit after  self-cal, rms=0.072924Jy  sigma=0.462897
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072924Jy  sigma=0.462897
! Fit after  self-cal, rms=0.073377Jy  sigma=0.460887
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.183 mas, bmaj=9.752 mas, bpa=-1.657 degrees
! Estimated noise=1.76719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000394441 Jy
! Component: 100  -  total flux cleaned = -0.000363951 Jy
! Component: 150  -  total flux cleaned = -0.000363311 Jy
! Component: 200  -  total flux cleaned = -0.000310792 Jy
! Total flux subtracted in 200 components = -0.000310792 Jy
! Clean residual min=-0.003898 max=0.002789 Jy/beam
! Clean residual mean=0.000023 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.20775 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 0.20775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073344Jy  sigma=0.460722
! Fit after  self-cal, rms=0.073380Jy  sigma=0.460688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115859 Jy
! Component: 100  -  total flux cleaned = -6.94124e-05 Jy
! Component: 150  -  total flux cleaned = -2.69755e-05 Jy
! Component: 200  -  total flux cleaned = -2.69409e-05 Jy
! Total flux subtracted in 200 components = -2.69409e-05 Jy
! Clean residual min=-0.003857 max=0.002759 Jy/beam
! Clean residual mean=0.000023 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.207723 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.207723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073365Jy  sigma=0.460604
! Fit after  self-cal, rms=0.073362Jy  sigma=0.460597
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073362Jy  sigma=0.460597
! Fit after  self-cal, rms=0.073599Jy  sigma=0.459841
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.184 mas, bmaj=9.762 mas, bpa=-1.66 degrees
! Estimated noise=1.76822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000210408 Jy
! Component: 100  -  total flux cleaned = -0.00023213 Jy
! Component: 150  -  total flux cleaned = -0.000250492 Jy
! Component: 200  -  total flux cleaned = -0.000267669 Jy
! Total flux subtracted in 200 components = -0.000267669 Jy
! Clean residual min=-0.003897 max=0.002646 Jy/beam
! Clean residual mean=0.000020 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.207455 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.207455 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073586Jy  sigma=0.459774
! Fit after  self-cal, rms=0.073593Jy  sigma=0.459763
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.12013e-05 Jy
! Component: 100  -  total flux cleaned = -2.39102e-05 Jy
! Component: 150  -  total flux cleaned = -2.40676e-05 Jy
! Component: 200  -  total flux cleaned = -2.43853e-05 Jy
! Total flux subtracted in 200 components = -2.43853e-05 Jy
! Clean residual min=-0.003859 max=0.002633 Jy/beam
! Clean residual mean=0.000020 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.207431 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 114 components and 0.207431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073586Jy  sigma=0.459719
! Fit after  self-cal, rms=0.073584Jy  sigma=0.459717
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073584Jy  sigma=0.459717
! Fit after  self-cal, rms=0.073724Jy  sigma=0.459687
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.234 mas, bmaj=22.15 mas, bpa=-2.67 degrees
! Estimated noise=2.18374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.54633e-05 Jy
! Component: 100  -  total flux cleaned = -7.05334e-05 Jy
! Component: 150  -  total flux cleaned = -0.000127228 Jy
! Component: 200  -  total flux cleaned = -0.000127459 Jy
! Total flux subtracted in 200 components = -0.000127459 Jy
! Clean residual min=-0.002947 max=0.002675 Jy/beam
! Clean residual mean=0.000040 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.207303 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 127 components and 0.207303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073722Jy  sigma=0.459682
! Fit after  self-cal, rms=0.073722Jy  sigma=0.459663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.43237e-06 Jy
! Component: 100  -  total flux cleaned = -4.9379e-05 Jy
! Component: 150  -  total flux cleaned = -6.19039e-05 Jy
! Component: 200  -  total flux cleaned = -5.08469e-05 Jy
! Total flux subtracted in 200 components = -5.08469e-05 Jy
! Clean residual min=-0.002943 max=0.002664 Jy/beam
! Clean residual mean=0.000040 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.207253 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 130 components and 0.207253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073724Jy  sigma=0.459668
! Fit after  self-cal, rms=0.073720Jy  sigma=0.459652
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.183 mas, bmaj=9.763 mas, bpa=-1.66 degrees
! Estimated noise=1.76858 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.183 x 9.763 at -1.66 degrees (North through East)
! Clean map  min=-0.003656  max=0.18992 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.535 mas, bmaj=7.93 mas, bpa=0.6179 degrees
! Estimated noise=3.08096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14806 Jy
! Component: 100  -  total flux cleaned = 0.180437 Jy
! Component: 150  -  total flux cleaned = 0.190263 Jy
! Component: 200  -  total flux cleaned = 0.195833 Jy
! Total flux subtracted in 200 components = 0.195833 Jy
! Clean residual min=-0.007626 max=0.005508 Jy/beam
! Clean residual mean=-0.000000 rms=0.001383 Jy/beam
! Combined flux in latest and established models = 0.195833 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.195833 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.183 mas, bmaj=9.763 mas, bpa=-1.66 degrees
! Estimated noise=1.76858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00575256 Jy
! Component: 100  -  total flux cleaned = 0.00793323 Jy
! Component: 150  -  total flux cleaned = 0.00868894 Jy
! Component: 200  -  total flux cleaned = 0.00917396 Jy
! Total flux subtracted in 200 components = 0.00917396 Jy
! Clean residual min=-0.004121 max=0.002762 Jy/beam
! Clean residual mean=0.000018 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 0.205007 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 52 components and 0.205007 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.234 mas, bmaj=22.15 mas, bpa=-2.67 degrees
! Estimated noise=2.18374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162663 Jy
! Component: 100  -  total flux cleaned = 0.00182876 Jy
! Component: 150  -  total flux cleaned = 0.00190401 Jy
! Component: 200  -  total flux cleaned = 0.00196892 Jy
! Total flux subtracted in 200 components = 0.00196892 Jy
! Clean residual min=-0.003022 max=0.002727 Jy/beam
! Clean residual mean=0.000040 rms=0.000777 Jy/beam
! Combined flux in latest and established models = 0.206976 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.85579e-05 Jy
! Component: 100  -  total flux cleaned = 7.4253e-05 Jy
! Component: 150  -  total flux cleaned = 9.08008e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105806 Jy
! Total flux subtracted in 200 components = 0.000105806 Jy
! Clean residual min=-0.002971 max=0.002711 Jy/beam
! Clean residual mean=0.000040 rms=0.000771 Jy/beam
! Combined flux in latest and established models = 0.207082 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.207082 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.183 mas, bmaj=9.763 mas, bpa=-1.66 degrees
! Estimated noise=1.76858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000208835 Jy
! Component: 100  -  total flux cleaned = -0.000163773 Jy
! Component: 150  -  total flux cleaned = -0.000126396 Jy
! Component: 200  -  total flux cleaned = -0.000127827 Jy
! Total flux subtracted in 200 components = -0.000127827 Jy
! Clean residual min=-0.003850 max=0.002803 Jy/beam
! Clean residual mean=0.000020 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.206954 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.206954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073774Jy  sigma=0.459835
! Fit after  self-cal, rms=0.073753Jy  sigma=0.459785
wmodel /scr/pima/rv100_uvs/J1342-2900_S_map.mod
! Writing 81 model components to file: /scr/pima/rv100_uvs/J1342-2900_S_map.mod
wobs /scr/pima/rv100_uvs/J1342-2900_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J1342-2900_S_uvs.fits
wwins /scr/pima/rv100_uvs/J1342-2900_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv100_uvs/J1342-2900_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00106393 Jy
! Component: 100  -  total flux cleaned = -0.000917967 Jy
! Component: 150  -  total flux cleaned = -0.00057602 Jy
! Component: 200  -  total flux cleaned = -0.000415447 Jy
! Component: 250  -  total flux cleaned = -0.000376466 Jy
! Component: 300  -  total flux cleaned = -0.000301582 Jy
! Component: 350  -  total flux cleaned = -0.000229626 Jy
! Component: 400  -  total flux cleaned = -0.000264316 Jy
! Component: 450  -  total flux cleaned = -0.000331495 Jy
! Component: 500  -  total flux cleaned = -0.000364511 Jy
! Component: 550  -  total flux cleaned = -0.000460545 Jy
! Component: 600  -  total flux cleaned = -0.000553932 Jy
! Component: 650  -  total flux cleaned = -0.000614653 Jy
! Component: 700  -  total flux cleaned = -0.000704337 Jy
! Component: 750  -  total flux cleaned = -0.000791963 Jy
! Component: 800  -  total flux cleaned = -0.000877204 Jy
! Component: 850  -  total flux cleaned = -0.000903883 Jy
! Component: 900  -  total flux cleaned = -0.000849037 Jy
! Component: 950  -  total flux cleaned = -0.000930001 Jy
! Component: 1000  -  total flux cleaned = -0.00100944 Jy
! Component: 1050  -  total flux cleaned = -0.00116546 Jy
! Component: 1100  -  total flux cleaned = -0.00126797 Jy
! Component: 1150  -  total flux cleaned = -0.00139432 Jy
! Component: 1200  -  total flux cleaned = -0.00154376 Jy
! Component: 1250  -  total flux cleaned = -0.00164201 Jy
! Component: 1300  -  total flux cleaned = -0.00185992 Jy
! Component: 1350  -  total flux cleaned = -0.00200271 Jy
! Component: 1400  -  total flux cleaned = -0.00216807 Jy
! Component: 1450  -  total flux cleaned = -0.00230795 Jy
! Component: 1500  -  total flux cleaned = -0.00246864 Jy
! Component: 1550  -  total flux cleaned = -0.0026049 Jy
! Component: 1600  -  total flux cleaned = -0.00269458 Jy
! Component: 1650  -  total flux cleaned = -0.00280561 Jy
! Component: 1700  -  total flux cleaned = -0.00282735 Jy
! Component: 1750  -  total flux cleaned = -0.00284905 Jy
! Component: 1800  -  total flux cleaned = -0.00293497 Jy
! Component: 1850  -  total flux cleaned = -0.00293507 Jy
! Component: 1900  -  total flux cleaned = -0.00304103 Jy
! Component: 1950  -  total flux cleaned = -0.00310365 Jy
! Component: 2000  -  total flux cleaned = -0.00306203 Jy
! Component: 2050  -  total flux cleaned = -0.00316505 Jy
! Component: 2100  -  total flux cleaned = -0.00318554 Jy
! Component: 2150  -  total flux cleaned = -0.00324617 Jy
! Component: 2200  -  total flux cleaned = -0.00324601 Jy
! Component: 2250  -  total flux cleaned = -0.00320598 Jy
! Component: 2300  -  total flux cleaned = -0.00322568 Jy
! Component: 2350  -  total flux cleaned = -0.00322555 Jy
! Component: 2400  -  total flux cleaned = -0.00320596 Jy
! Component: 2450  -  total flux cleaned = -0.00318644 Jy
! Component: 2500  -  total flux cleaned = -0.00314782 Jy
! Component: 2550  -  total flux cleaned = -0.0031095 Jy
! Component: 2600  -  total flux cleaned = -0.00312866 Jy
! Component: 2650  -  total flux cleaned = -0.00309088 Jy
! Component: 2700  -  total flux cleaned = -0.00301571 Jy
! Component: 2750  -  total flux cleaned = -0.00301572 Jy
! Component: 2800  -  total flux cleaned = -0.00299713 Jy
! Component: 2850  -  total flux cleaned = -0.00299727 Jy
! Component: 2900  -  total flux cleaned = -0.00296062 Jy
! Component: 2950  -  total flux cleaned = -0.00301524 Jy
! Component: 3000  -  total flux cleaned = -0.0029609 Jy
! Component: 3050  -  total flux cleaned = -0.00297892 Jy
! Component: 3100  -  total flux cleaned = -0.00292521 Jy
! Component: 3150  -  total flux cleaned = -0.00292529 Jy
! Component: 3200  -  total flux cleaned = -0.00292527 Jy
! Component: 3250  -  total flux cleaned = -0.0028724 Jy
! Component: 3300  -  total flux cleaned = -0.00288995 Jy
! Component: 3350  -  total flux cleaned = -0.00288988 Jy
! Component: 3400  -  total flux cleaned = -0.00287241 Jy
! Component: 3450  -  total flux cleaned = -0.00283777 Jy
! Component: 3500  -  total flux cleaned = -0.00285501 Jy
! Component: 3550  -  total flux cleaned = -0.00275221 Jy
! Component: 3600  -  total flux cleaned = -0.00280346 Jy
! Component: 3650  -  total flux cleaned = -0.00275259 Jy
! Component: 3700  -  total flux cleaned = -0.00273572 Jy
! Component: 3750  -  total flux cleaned = -0.002702 Jy
! Component: 3800  -  total flux cleaned = -0.00268521 Jy
! Component: 3850  -  total flux cleaned = -0.002635 Jy
! Component: 3900  -  total flux cleaned = -0.00258497 Jy
! Component: 3950  -  total flux cleaned = -0.00255174 Jy
! Component: 4000  -  total flux cleaned = -0.00253517 Jy
! Component: 4050  -  total flux cleaned = -0.00248572 Jy
! Total flux subtracted in 4096 components = -0.00245289 Jy
! Clean residual min=-0.000964 max=0.001010 Jy/beam
! Clean residual mean=0.000007 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.204501 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 335 components and 0.204501 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J1342-2900_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.183 x 9.763 at -1.66 degrees (North through East)
! Clean map  min=-0.0035454  max=0.19075 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1342-2900_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.190749 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000287855 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.452723 0.452723 0.905446 1.81089 3.62178 7.24356 14.4871 28.9743 57.9485
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.19 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  662.657 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J1342-2900_S_uvs.log closed on Mon Feb 29 13:27:52 2016