! Started logfile: /scr/pima/rv100_uvs/J1024+2332_X_uvs.log on Mon Feb 29 13:27:00 2016 obs /scr/pima/rv100_uvs/J1024+2332_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J1024+2332_X_uva.fits ! AN table 1: 36 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J1024+2332 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 3528 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J1024+2332_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012023Jy sigma=8.912954 ! Fit after self-cal, rms=0.796437Jy sigma=7.041376 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.783 mas, bmaj=2.024 mas, bpa=8.039 degrees ! Estimated noise=2.32669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147625 Jy ! Component: 100 - total flux cleaned = 0.196146 Jy ! Total flux subtracted in 100 components = 0.196146 Jy ! Clean residual min=-0.011192 max=0.022667 Jy/beam ! Clean residual mean=0.000002 rms=0.003077 Jy/beam ! Combined flux in latest and established models = 0.196146 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.196146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075067Jy sigma=0.653599 ! Fit after self-cal, rms=0.074885Jy sigma=0.652514 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258697 Jy ! Component: 100 - total flux cleaned = 0.0394075 Jy ! Total flux subtracted in 100 components = 0.0394075 Jy ! Clean residual min=-0.008240 max=0.012102 Jy/beam ! Clean residual mean=0.000002 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 0.235554 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 9 components and 0.235554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062007Jy sigma=0.521186 ! Fit after self-cal, rms=0.061864Jy sigma=0.520390 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120462 Jy ! Component: 100 - total flux cleaned = 0.0196369 Jy ! Total flux subtracted in 100 components = 0.0196369 Jy ! Clean residual min=-0.006667 max=0.007612 Jy/beam ! Clean residual mean=0.000002 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.255191 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.255191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058237Jy sigma=0.483086 ! Fit after self-cal, rms=0.058062Jy sigma=0.481991 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.026 mas, bmaj=2.323 mas, bpa=4.342 degrees ! Estimated noise=1.42757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00936232 Jy ! Component: 100 - total flux cleaned = 0.0152227 Jy ! Component: 150 - total flux cleaned = 0.019031 Jy ! Component: 200 - total flux cleaned = 0.0215371 Jy ! Total flux subtracted in 200 components = 0.0215371 Jy ! Clean residual min=-0.003818 max=0.005816 Jy/beam ! Clean residual mean=0.000004 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.276728 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.276728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056474Jy sigma=0.464856 ! Fit after self-cal, rms=0.056395Jy sigma=0.464040 ! Inverting map ! Added new window around map position (2.6, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547445 Jy ! Component: 100 - total flux cleaned = 0.00656223 Jy ! Component: 150 - total flux cleaned = 0.00717431 Jy ! Component: 200 - total flux cleaned = 0.00754957 Jy ! Total flux subtracted in 200 components = 0.00754957 Jy ! Clean residual min=-0.003215 max=0.003081 Jy/beam ! Clean residual mean=0.000003 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.284277 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.284277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055837Jy sigma=0.459077 ! Fit after self-cal, rms=0.055796Jy sigma=0.458376 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.026 x 2.323 at 4.342 degrees (North through East) ! Clean map min=-0.0029829 max=0.20662 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.99 KP 0.98 LA 1.01 MK 1.03 ! NL 1.00 OV 1.00 PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 1.01 LA 1.02 MK 1.01 ! NL 0.99 OV 1.00 PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 0.98 LA 1.01 MK 1.06 ! NL 1.00 OV 1.00 PT 0.99 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.98 LA 1.03 MK 1.07 ! NL 1.01 OV 1.04 PT 0.98 SC 1.00 ! ! ! Fit before self-cal, rms=0.055796Jy sigma=0.458376 ! Fit after self-cal, rms=0.055847Jy sigma=0.455707 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.031 mas, bmaj=2.317 mas, bpa=4.563 degrees ! Estimated noise=1.42999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146391 Jy ! Component: 100 - total flux cleaned = 0.00166726 Jy ! Component: 150 - total flux cleaned = 0.00179607 Jy ! Component: 200 - total flux cleaned = 0.00187574 Jy ! Total flux subtracted in 200 components = 0.00187574 Jy ! Clean residual min=-0.002828 max=0.002931 Jy/beam ! Clean residual mean=0.000002 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.286153 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.286153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055753Jy sigma=0.455035 ! Fit after self-cal, rms=0.055741Jy sigma=0.454960 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055741Jy sigma=0.454960 ! Fit after self-cal, rms=0.055858Jy sigma=0.453885 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.316 mas, bpa=4.5 degrees ! Estimated noise=1.43281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132703 Jy ! Component: 100 - total flux cleaned = 0.00177235 Jy ! Component: 150 - total flux cleaned = 0.00189197 Jy ! Component: 200 - total flux cleaned = 0.00197246 Jy ! Total flux subtracted in 200 components = 0.00197246 Jy ! Clean residual min=-0.002705 max=0.002699 Jy/beam ! Clean residual mean=-0.000000 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.288126 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 0.288126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055809Jy sigma=0.453527 ! Fit after self-cal, rms=0.055809Jy sigma=0.453480 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067198 Jy ! Component: 100 - total flux cleaned = 0.000722094 Jy ! Component: 150 - total flux cleaned = 0.000699982 Jy ! Component: 200 - total flux cleaned = 0.0007005 Jy ! Total flux subtracted in 200 components = 0.0007005 Jy ! Clean residual min=-0.002736 max=0.002656 Jy/beam ! Clean residual mean=-0.000000 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.288826 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.288826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055786Jy sigma=0.453326 ! Fit after self-cal, rms=0.055785Jy sigma=0.453314 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055785Jy sigma=0.453314 ! Fit after self-cal, rms=0.055899Jy sigma=0.453256 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=2.316 mas, bpa=4.484 degrees ! Estimated noise=1.43461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00080509 Jy ! Component: 100 - total flux cleaned = 0.00107023 Jy ! Component: 150 - total flux cleaned = 0.00119228 Jy ! Component: 200 - total flux cleaned = 0.00117435 Jy ! Total flux subtracted in 200 components = 0.00117435 Jy ! Clean residual min=-0.002648 max=0.002667 Jy/beam ! Clean residual mean=-0.000000 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.29 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.29 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055877Jy sigma=0.453119 ! Fit after self-cal, rms=0.055877Jy sigma=0.453105 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351105 Jy ! Component: 100 - total flux cleaned = 0.000351964 Jy ! Component: 150 - total flux cleaned = 0.000335255 Jy ! Component: 200 - total flux cleaned = 0.000335005 Jy ! Total flux subtracted in 200 components = 0.000335005 Jy ! Clean residual min=-0.002650 max=0.002657 Jy/beam ! Clean residual mean=-0.000000 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.290335 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.290335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055865Jy sigma=0.453028 ! Fit after self-cal, rms=0.055865Jy sigma=0.453022 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055865Jy sigma=0.453022 ! Fit after self-cal, rms=0.055962Jy sigma=0.452997 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.065 mas, bmaj=3.469 mas, bpa=-18.32 degrees ! Estimated noise=1.67398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000998951 Jy ! Component: 100 - total flux cleaned = 0.00119975 Jy ! Component: 150 - total flux cleaned = 0.00118192 Jy ! Component: 200 - total flux cleaned = 0.00116527 Jy ! Total flux subtracted in 200 components = 0.00116527 Jy ! Clean residual min=-0.002642 max=0.002237 Jy/beam ! Clean residual mean=-0.000002 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.291501 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.291501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055961Jy sigma=0.452953 ! Fit after self-cal, rms=0.055959Jy sigma=0.452936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260185 Jy ! Component: 100 - total flux cleaned = 0.000246118 Jy ! Component: 150 - total flux cleaned = 0.000232526 Jy ! Component: 200 - total flux cleaned = 0.00020654 Jy ! Total flux subtracted in 200 components = 0.00020654 Jy ! Clean residual min=-0.002600 max=0.002137 Jy/beam ! Clean residual mean=-0.000002 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.291707 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.291707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055960Jy sigma=0.452938 ! Fit after self-cal, rms=0.055959Jy sigma=0.452932 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=2.315 mas, bpa=4.494 degrees ! Estimated noise=1.43631 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.034 x 2.315 at 4.494 degrees (North through East) ! Clean map min=-0.002445 max=0.20663 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7904 mas, bmaj=2.016 mas, bpa=8.248 degrees ! Estimated noise=2.35228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149172 Jy ! Component: 100 - total flux cleaned = 0.198291 Jy ! Component: 150 - total flux cleaned = 0.223472 Jy ! Component: 200 - total flux cleaned = 0.238382 Jy ! Total flux subtracted in 200 components = 0.238382 Jy ! Clean residual min=-0.007434 max=0.008569 Jy/beam ! Clean residual mean=0.000002 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.238382 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.238382 Jy ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=2.315 mas, bpa=4.494 degrees ! Estimated noise=1.43631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173532 Jy ! Component: 100 - total flux cleaned = 0.0284099 Jy ! Component: 150 - total flux cleaned = 0.0356879 Jy ! Component: 200 - total flux cleaned = 0.0406295 Jy ! Total flux subtracted in 200 components = 0.0406295 Jy ! Clean residual min=-0.003513 max=0.003473 Jy/beam ! Clean residual mean=0.000001 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.279011 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.279011 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.065 mas, bmaj=3.469 mas, bpa=-18.32 degrees ! Estimated noise=1.67398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513953 Jy ! Component: 100 - total flux cleaned = 0.00824416 Jy ! Component: 150 - total flux cleaned = 0.0100895 Jy ! Component: 200 - total flux cleaned = 0.0108387 Jy ! Total flux subtracted in 200 components = 0.0108387 Jy ! Clean residual min=-0.003066 max=0.002517 Jy/beam ! Clean residual mean=-0.000001 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.28985 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552852 Jy ! Component: 100 - total flux cleaned = 0.0010021 Jy ! Component: 150 - total flux cleaned = 0.00133741 Jy ! Component: 200 - total flux cleaned = 0.00153621 Jy ! Total flux subtracted in 200 components = 0.00153621 Jy ! Clean residual min=-0.002751 max=0.002112 Jy/beam ! Clean residual mean=-0.000002 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.291386 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 87 components and 0.291386 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.034 mas, bmaj=2.315 mas, bpa=4.494 degrees ! Estimated noise=1.43631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155702 Jy ! Component: 100 - total flux cleaned = 0.000232391 Jy ! Component: 150 - total flux cleaned = 0.000232236 Jy ! Component: 200 - total flux cleaned = 0.000263685 Jy ! Total flux subtracted in 200 components = 0.000263685 Jy ! Clean residual min=-0.002722 max=0.002612 Jy/beam ! Clean residual mean=-0.000001 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.29165 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.29165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055999Jy sigma=0.453357 ! Fit after self-cal, rms=0.055995Jy sigma=0.453300 wmodel /scr/pima/rv100_uvs/J1024+2332_X_map.mod ! Writing 103 model components to file: /scr/pima/rv100_uvs/J1024+2332_X_map.mod wobs /scr/pima/rv100_uvs/J1024+2332_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J1024+2332_X_uvs.fits wwins /scr/pima/rv100_uvs/J1024+2332_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J1024+2332_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126628 Jy ! Component: 100 - total flux cleaned = 0.000336765 Jy ! Component: 150 - total flux cleaned = 0.000416555 Jy ! Component: 200 - total flux cleaned = 0.000341191 Jy ! Component: 250 - total flux cleaned = 0.000415546 Jy ! Component: 300 - total flux cleaned = 0.00045103 Jy ! Component: 350 - total flux cleaned = 0.000416643 Jy ! Component: 400 - total flux cleaned = 0.000417337 Jy ! Component: 450 - total flux cleaned = 0.000319702 Jy ! Component: 500 - total flux cleaned = 0.000320427 Jy ! Component: 550 - total flux cleaned = 0.000352213 Jy ! Component: 600 - total flux cleaned = 0.000594826 Jy ! Component: 650 - total flux cleaned = 0.00077238 Jy ! Component: 700 - total flux cleaned = 0.000859298 Jy ! Component: 750 - total flux cleaned = 0.000945538 Jy ! Component: 800 - total flux cleaned = 0.0010583 Jy ! Component: 850 - total flux cleaned = 0.00105894 Jy ! Component: 900 - total flux cleaned = 0.00111443 Jy ! Component: 950 - total flux cleaned = 0.0012225 Jy ! Component: 1000 - total flux cleaned = 0.00132828 Jy ! Component: 1050 - total flux cleaned = 0.00140633 Jy ! Component: 1100 - total flux cleaned = 0.00148268 Jy ! Component: 1150 - total flux cleaned = 0.0014317 Jy ! Component: 1200 - total flux cleaned = 0.00140693 Jy ! Component: 1250 - total flux cleaned = 0.00148133 Jy ! Component: 1300 - total flux cleaned = 0.00148121 Jy ! Component: 1350 - total flux cleaned = 0.00160197 Jy ! Component: 1400 - total flux cleaned = 0.00172095 Jy ! Component: 1450 - total flux cleaned = 0.00174458 Jy ! Component: 1500 - total flux cleaned = 0.00181478 Jy ! Component: 1550 - total flux cleaned = 0.00186112 Jy ! Component: 1600 - total flux cleaned = 0.00190666 Jy ! Component: 1650 - total flux cleaned = 0.00199713 Jy ! Component: 1700 - total flux cleaned = 0.00208647 Jy ! Component: 1750 - total flux cleaned = 0.00217462 Jy ! Component: 1800 - total flux cleaned = 0.00221842 Jy ! Component: 1850 - total flux cleaned = 0.0023268 Jy ! Component: 1900 - total flux cleaned = 0.00243419 Jy ! Component: 1950 - total flux cleaned = 0.00249809 Jy ! Component: 2000 - total flux cleaned = 0.0024768 Jy ! Component: 2050 - total flux cleaned = 0.00251894 Jy ! Component: 2100 - total flux cleaned = 0.00251893 Jy ! Component: 2150 - total flux cleaned = 0.0025392 Jy ! Component: 2200 - total flux cleaned = 0.00255967 Jy ! Component: 2250 - total flux cleaned = 0.00255958 Jy ! Component: 2300 - total flux cleaned = 0.00259968 Jy ! Component: 2350 - total flux cleaned = 0.0025198 Jy ! Component: 2400 - total flux cleaned = 0.00259903 Jy ! Component: 2450 - total flux cleaned = 0.00257953 Jy ! Component: 2500 - total flux cleaned = 0.00259892 Jy ! Component: 2550 - total flux cleaned = 0.00257955 Jy ! Component: 2600 - total flux cleaned = 0.00259896 Jy ! Component: 2650 - total flux cleaned = 0.0025989 Jy ! Component: 2700 - total flux cleaned = 0.00259904 Jy ! Component: 2750 - total flux cleaned = 0.00258006 Jy ! Component: 2800 - total flux cleaned = 0.00252399 Jy ! Component: 2850 - total flux cleaned = 0.00254254 Jy ! Component: 2900 - total flux cleaned = 0.00252398 Jy ! Component: 2950 - total flux cleaned = 0.00250575 Jy ! Component: 3000 - total flux cleaned = 0.00252397 Jy ! Component: 3050 - total flux cleaned = 0.00250602 Jy ! Component: 3100 - total flux cleaned = 0.00250624 Jy ! Component: 3150 - total flux cleaned = 0.00250631 Jy ! Component: 3200 - total flux cleaned = 0.00250647 Jy ! Component: 3250 - total flux cleaned = 0.00248889 Jy ! Component: 3300 - total flux cleaned = 0.00252383 Jy ! Component: 3350 - total flux cleaned = 0.00259332 Jy ! Component: 3400 - total flux cleaned = 0.00262788 Jy ! Component: 3450 - total flux cleaned = 0.00255887 Jy ! Component: 3500 - total flux cleaned = 0.00261041 Jy ! Component: 3550 - total flux cleaned = 0.00266159 Jy ! Component: 3600 - total flux cleaned = 0.00266171 Jy ! Component: 3650 - total flux cleaned = 0.00267864 Jy ! Component: 3700 - total flux cleaned = 0.00271219 Jy ! Component: 3750 - total flux cleaned = 0.00269543 Jy ! Component: 3800 - total flux cleaned = 0.0027285 Jy ! Component: 3850 - total flux cleaned = 0.002712 Jy ! Component: 3900 - total flux cleaned = 0.00274491 Jy ! Component: 3950 - total flux cleaned = 0.00281017 Jy ! Component: 4000 - total flux cleaned = 0.00277757 Jy ! Component: 4050 - total flux cleaned = 0.00282611 Jy ! Total flux subtracted in 4096 components = 0.00285809 Jy ! Clean residual min=-0.000892 max=0.001177 Jy/beam ! Clean residual mean=0.000000 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.294508 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 364 components and 0.294508 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J1024+2332_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.034 x 2.315 at 4.494 degrees (North through East) ! Clean map min=-0.0022255 max=0.20674 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J1024+2332_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.206745 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000263381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.382183 0.382183 0.764367 1.52873 3.05747 6.11493 12.2299 24.4597 48.9195 97.8389 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.206 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 784.963 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J1024+2332_X_uvs.log closed on Mon Feb 29 13:27:04 2016