! Started logfile: /scr/pima/rv100_uvs/J0927+3902_X_uvs.log on Mon Feb 29 13:26:36 2016 obs /scr/pima/rv100_uvs/J0927+3902_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J0927+3902_X_uva.fits ! AN table 1: 85 integrations on 66 of 66 possible baselines. ! AN table 2: 10 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.235231 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0927+3902 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 5288 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0927+3902_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 642 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 670 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 712 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 712 telescope corrections were flagged in sub-array 1. ! A total of 20 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=7.338734Jy sigma=13.187905 ! Fit after self-cal, rms=6.411409Jy sigma=11.300212 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.535 mas, bmaj=0.7394 mas, bpa=29.09 degrees ! Estimated noise=9.84814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.86805 Jy ! Component: 100 - total flux cleaned = 5.40849 Jy ! Total flux subtracted in 100 components = 5.40849 Jy ! Clean residual min=-0.329485 max=0.833327 Jy/beam ! Clean residual mean=0.006261 rms=0.079502 Jy/beam ! Combined flux in latest and established models = 5.40849 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 5.40849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.089594Jy sigma=5.301704 ! Fit after self-cal, rms=3.063767Jy sigma=5.282837 ! Inverting map ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07672 Jy ! Component: 100 - total flux cleaned = 1.84381 Jy ! Total flux subtracted in 100 components = 1.84381 Jy ! Clean residual min=-0.200896 max=0.432834 Jy/beam ! Clean residual mean=0.003560 rms=0.048443 Jy/beam ! Combined flux in latest and established models = 7.2523 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 7.2523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.958474Jy sigma=3.305857 ! Fit after self-cal, rms=1.924797Jy sigma=3.280232 ! Inverting map ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.58628 Jy ! Component: 100 - total flux cleaned = 1.01082 Jy ! Total flux subtracted in 100 components = 1.01082 Jy ! Clean residual min=-0.128346 max=0.242963 Jy/beam ! Clean residual mean=0.002080 rms=0.033039 Jy/beam ! Combined flux in latest and established models = 8.26312 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 8.26312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.364837Jy sigma=2.269041 ! Fit after self-cal, rms=1.348397Jy sigma=2.253233 ! Inverting map ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334087 Jy ! Component: 100 - total flux cleaned = 0.578578 Jy ! Total flux subtracted in 100 components = 0.578578 Jy ! Clean residual min=-0.100880 max=0.194693 Jy/beam ! Clean residual mean=0.001233 rms=0.025673 Jy/beam ! Combined flux in latest and established models = 8.8417 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 8.8417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.066654Jy sigma=1.733190 ! Fit after self-cal, rms=1.060063Jy sigma=1.724305 ! Inverting map ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-2.6, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214185 Jy ! Component: 100 - total flux cleaned = 0.371449 Jy ! Total flux subtracted in 100 components = 0.371449 Jy ! Clean residual min=-0.092920 max=0.126843 Jy/beam ! Clean residual mean=0.000690 rms=0.021661 Jy/beam ! Combined flux in latest and established models = 9.21315 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 9.21315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.925458Jy sigma=1.497373 ! Fit after self-cal, rms=0.922019Jy sigma=1.490361 ! Inverting map ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6322 mas, bmaj=0.9346 mas, bpa=24.97 degrees ! Estimated noise=7.44484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.37262 Jy ! Component: 100 - total flux cleaned = 0.583537 Jy ! Component: 150 - total flux cleaned = 0.717314 Jy ! Component: 200 - total flux cleaned = 0.807051 Jy ! Total flux subtracted in 200 components = 0.807051 Jy ! Clean residual min=-0.131013 max=0.160976 Jy/beam ! Clean residual mean=-0.003569 rms=0.031866 Jy/beam ! Combined flux in latest and established models = 10.0202 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 10.0202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.705854Jy sigma=1.041840 ! Fit after self-cal, rms=0.702245Jy sigma=1.036723 ! Inverting map ! Your choice of large map pixels excluded 3.99% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6322 x 0.9346 at 24.97 degrees (North through East) ! Clean map min=-0.12576 max=5.7717 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.94 HN 1.00 KP 0.99 LA 1.00 ! MA 1.08 MK 1.02 NL 0.99 NY 1.01 ! OV 1.01 PT 0.94 SC 1.01 WF 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* NY 0.00* ! ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.10 HN 0.99 KP 0.99 LA 0.96 ! MA 1.07 MK 1.02 NL 0.97 NY 1.04 ! OV 1.03 PT 0.96 SC 1.00* WF 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* NY 0.00* ! ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.07 HN 0.99 KP 0.97 LA 0.98 ! MA 1.12 MK 1.03 NL 1.00 NY 1.00* ! OV 1.01 PT 0.98 SC 0.98 WF 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* NY 0.00* ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.00* HN 1.00* KP 1.00* LA 1.00* ! MA 1.00* MK 1.00* NL 1.00* NY 1.00* ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* NY 0.00* ! ! ! Fit before self-cal, rms=0.702245Jy sigma=1.036723 ! Fit after self-cal, rms=0.666413Jy sigma=0.907951 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6545 mas, bmaj=0.9551 mas, bpa=22.48 degrees ! Estimated noise=7.64849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127323 Jy ! Component: 100 - total flux cleaned = -0.0185334 Jy ! Component: 150 - total flux cleaned = -0.0235792 Jy ! Component: 200 - total flux cleaned = -0.0270162 Jy ! Total flux subtracted in 200 components = -0.0270162 Jy ! Clean residual min=-0.133168 max=0.135416 Jy/beam ! Clean residual mean=-0.002867 rms=0.027507 Jy/beam ! Combined flux in latest and established models = 9.99318 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 9.99318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.660238Jy sigma=0.894949 ! Fit after self-cal, rms=0.659105Jy sigma=0.894044 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.659105Jy sigma=0.894044 ! Fit after self-cal, rms=0.456562Jy sigma=0.513174 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6563 mas, bmaj=0.9536 mas, bpa=22.02 degrees ! Estimated noise=7.61133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0658722 Jy ! Component: 100 - total flux cleaned = 0.0800085 Jy ! Component: 150 - total flux cleaned = 0.0883276 Jy ! Component: 200 - total flux cleaned = 0.0931363 Jy ! Total flux subtracted in 200 components = 0.0931363 Jy ! Clean residual min=-0.034123 max=0.051905 Jy/beam ! Clean residual mean=0.001759 rms=0.009284 Jy/beam ! Combined flux in latest and established models = 10.0863 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 10.0863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441097Jy sigma=0.496018 ! Fit after self-cal, rms=0.438302Jy sigma=0.490300 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503546 Jy ! Component: 100 - total flux cleaned = 0.060692 Jy ! Component: 150 - total flux cleaned = 0.0660641 Jy ! Component: 200 - total flux cleaned = 0.068905 Jy ! Total flux subtracted in 200 components = 0.068905 Jy ! Clean residual min=-0.034985 max=0.041355 Jy/beam ! Clean residual mean=0.001121 rms=0.008494 Jy/beam ! Combined flux in latest and established models = 10.1552 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 10.1552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.425643Jy sigma=0.475536 ! Fit after self-cal, rms=0.424277Jy sigma=0.472276 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (4, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319356 Jy ! Component: 100 - total flux cleaned = 0.0441186 Jy ! Component: 150 - total flux cleaned = 0.0508362 Jy ! Component: 200 - total flux cleaned = 0.0568349 Jy ! Total flux subtracted in 200 components = 0.0568349 Jy ! Clean residual min=-0.039290 max=0.034936 Jy/beam ! Clean residual mean=0.000612 rms=0.007809 Jy/beam ! Combined flux in latest and established models = 10.2121 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 10.2121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.415816Jy sigma=0.465348 ! Fit after self-cal, rms=0.415108Jy sigma=0.463415 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.415108Jy sigma=0.463415 ! Fit after self-cal, rms=0.419429Jy sigma=0.450228 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6576 mas, bmaj=0.9535 mas, bpa=21.8 degrees ! Estimated noise=7.60489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201801 Jy ! Component: 100 - total flux cleaned = 0.035811 Jy ! Component: 150 - total flux cleaned = 0.0467906 Jy ! Component: 200 - total flux cleaned = 0.0544139 Jy ! Total flux subtracted in 200 components = 0.0544139 Jy ! Clean residual min=-0.032146 max=0.033374 Jy/beam ! Clean residual mean=0.000494 rms=0.007543 Jy/beam ! Combined flux in latest and established models = 10.2665 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 10.2665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413500Jy sigma=0.445438 ! Fit after self-cal, rms=0.413395Jy sigma=0.444323 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.8, 16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0310496 Jy ! Component: 100 - total flux cleaned = 0.0455765 Jy ! Component: 150 - total flux cleaned = 0.0525719 Jy ! Component: 200 - total flux cleaned = 0.0551034 Jy ! Total flux subtracted in 200 components = 0.0551034 Jy ! Clean residual min=-0.029309 max=0.029630 Jy/beam ! Clean residual mean=0.000116 rms=0.007038 Jy/beam ! Combined flux in latest and established models = 10.3216 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 105 components and 10.3216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.406931Jy sigma=0.439989 ! Fit after self-cal, rms=0.406189Jy sigma=0.438322 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.406189Jy sigma=0.438322 ! Fit after self-cal, rms=0.406897Jy sigma=0.435104 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=1.846 mas, bmaj=3.101 mas, bpa=3.789 degrees ! Estimated noise=13.8204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333542 Jy ! Component: 100 - total flux cleaned = 0.0446496 Jy ! Component: 150 - total flux cleaned = 0.055057 Jy ! Component: 200 - total flux cleaned = 0.0618228 Jy ! Total flux subtracted in 200 components = 0.0618228 Jy ! Clean residual min=-0.049205 max=0.046794 Jy/beam ! Clean residual mean=0.000193 rms=0.014951 Jy/beam ! Combined flux in latest and established models = 10.3834 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 122 components and 10.3834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401235Jy sigma=0.441490 ! Fit after self-cal, rms=0.401357Jy sigma=0.438004 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391813 Jy ! Component: 100 - total flux cleaned = 0.0112036 Jy ! Component: 150 - total flux cleaned = 0.0163362 Jy ! Component: 200 - total flux cleaned = 0.0193131 Jy ! Total flux subtracted in 200 components = 0.0193131 Jy ! Clean residual min=-0.049686 max=0.047203 Jy/beam ! Clean residual mean=-0.000279 rms=0.014973 Jy/beam ! Combined flux in latest and established models = 10.4027 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 129 components and 10.4027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399399Jy sigma=0.443543 ! Fit after self-cal, rms=0.399623Jy sigma=0.442081 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6579 mas, bmaj=0.9532 mas, bpa=21.7 degrees ! Estimated noise=7.59886 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6579 x 0.9532 at 21.7 degrees (North through East) ! Clean map min=-0.026223 max=5.8012 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399623Jy sigma=0.442081 ! Fit after self-cal, rms=0.354392Jy sigma=0.345476 ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.658 mas, bmaj=0.9534 mas, bpa=21.86 degrees ! Estimated noise=7.60792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00448249 Jy ! Component: 100 - total flux cleaned = -0.000509611 Jy ! Component: 150 - total flux cleaned = 0.00242133 Jy ! Component: 200 - total flux cleaned = 0.00405138 Jy ! Total flux subtracted in 200 components = 0.00405138 Jy ! Clean residual min=-0.025617 max=0.030402 Jy/beam ! Clean residual mean=-0.000101 rms=0.006269 Jy/beam ! Combined flux in latest and established models = 10.4068 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 137 components and 10.4068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.351237Jy sigma=0.341324 ! Fit after self-cal, rms=0.351118Jy sigma=0.340883 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (11.2, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223454 Jy ! Component: 100 - total flux cleaned = 0.0228562 Jy ! Component: 150 - total flux cleaned = 0.0250428 Jy ! Component: 200 - total flux cleaned = 0.0270853 Jy ! Total flux subtracted in 200 components = 0.0270853 Jy ! Clean residual min=-0.025865 max=0.024219 Jy/beam ! Clean residual mean=-0.000343 rms=0.006050 Jy/beam ! Combined flux in latest and established models = 10.4338 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 144 components and 10.4338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347011Jy sigma=0.335215 ! Fit after self-cal, rms=0.347003Jy sigma=0.334417 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347003Jy sigma=0.334417 ! Fit after self-cal, rms=0.345592Jy sigma=0.332214 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.5648 mas, bmaj=0.7438 mas, bpa=26.38 degrees ! Estimated noise=10.3444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.13603 Jy ! Component: 100 - total flux cleaned = 5.82047 Jy ! Component: 150 - total flux cleaned = 6.91046 Jy ! Component: 200 - total flux cleaned = 7.68214 Jy ! Total flux subtracted in 200 components = 7.68214 Jy ! Clean residual min=-0.173219 max=0.433135 Jy/beam ! Clean residual mean=0.003168 rms=0.043765 Jy/beam ! Combined flux in latest and established models = 7.68214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 7.68214 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6583 mas, bmaj=0.9536 mas, bpa=21.85 degrees ! Estimated noise=7.5993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.899492 Jy ! Component: 100 - total flux cleaned = 1.41008 Jy ! Component: 150 - total flux cleaned = 1.71945 Jy ! Component: 200 - total flux cleaned = 1.92528 Jy ! Total flux subtracted in 200 components = 1.92528 Jy ! Clean residual min=-0.056966 max=0.122215 Jy/beam ! Clean residual mean=0.006996 rms=0.022183 Jy/beam ! Combined flux in latest and established models = 9.60742 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 9.60742 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (0.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149614 Jy ! Component: 100 - total flux cleaned = 0.261929 Jy ! Component: 150 - total flux cleaned = 0.351326 Jy ! Component: 200 - total flux cleaned = 0.424768 Jy ! Total flux subtracted in 200 components = 0.424768 Jy ! Clean residual min=-0.035187 max=0.071471 Jy/beam ! Clean residual mean=0.003158 rms=0.011998 Jy/beam ! Combined flux in latest and established models = 10.0322 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 10.0322 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-1.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.069976 Jy ! Component: 100 - total flux cleaned = 0.122622 Jy ! Component: 150 - total flux cleaned = 0.158484 Jy ! Component: 200 - total flux cleaned = 0.185386 Jy ! Total flux subtracted in 200 components = 0.185386 Jy ! Clean residual min=-0.031643 max=0.043604 Jy/beam ! Clean residual mean=0.001521 rms=0.008493 Jy/beam ! Combined flux in latest and established models = 10.2176 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 10.2176 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387516 Jy ! Component: 100 - total flux cleaned = 0.0607067 Jy ! Component: 150 - total flux cleaned = 0.0802749 Jy ! Component: 200 - total flux cleaned = 0.0939289 Jy ! Total flux subtracted in 200 components = 0.0939289 Jy ! Clean residual min=-0.028385 max=0.034645 Jy/beam ! Clean residual mean=0.000690 rms=0.007219 Jy/beam ! Combined flux in latest and established models = 10.3115 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 95 components and 10.3115 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (10, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243456 Jy ! Component: 100 - total flux cleaned = 0.0337773 Jy ! Component: 150 - total flux cleaned = 0.0408669 Jy ! Component: 200 - total flux cleaned = 0.048403 Jy ! Total flux subtracted in 200 components = 0.048403 Jy ! Clean residual min=-0.026531 max=0.029939 Jy/beam ! Clean residual mean=0.000373 rms=0.006687 Jy/beam ! Combined flux in latest and established models = 10.3599 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 115 components and 10.3599 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (17.2, -4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022603 Jy ! Component: 100 - total flux cleaned = 0.0296691 Jy ! Component: 150 - total flux cleaned = 0.0356269 Jy ! Component: 200 - total flux cleaned = 0.0413221 Jy ! Total flux subtracted in 200 components = 0.0413221 Jy ! Clean residual min=-0.026438 max=0.025908 Jy/beam ! Clean residual mean=0.000087 rms=0.006373 Jy/beam ! Combined flux in latest and established models = 10.4012 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 128 components and 10.4012 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=1.848 mas, bmaj=3.104 mas, bpa=3.695 degrees ! Estimated noise=13.7698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317414 Jy ! Component: 100 - total flux cleaned = 0.0378783 Jy ! Component: 150 - total flux cleaned = 0.0441424 Jy ! Component: 200 - total flux cleaned = 0.048217 Jy ! Total flux subtracted in 200 components = 0.048217 Jy ! Clean residual min=-0.046302 max=0.039126 Jy/beam ! Clean residual mean=-0.000942 rms=0.013970 Jy/beam ! Combined flux in latest and established models = 10.4494 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379944 Jy ! Component: 100 - total flux cleaned = 0.00738837 Jy ! Component: 150 - total flux cleaned = 0.0107549 Jy ! Component: 200 - total flux cleaned = 0.0133129 Jy ! Total flux subtracted in 200 components = 0.0133129 Jy ! Clean residual min=-0.044987 max=0.037662 Jy/beam ! Clean residual mean=-0.001255 rms=0.013747 Jy/beam ! Combined flux in latest and established models = 10.4628 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 158 components and 10.4628 Jy ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6583 mas, bmaj=0.9536 mas, bpa=21.85 degrees ! Estimated noise=7.5993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00420342 Jy ! Component: 100 - total flux cleaned = -0.00424835 Jy ! Component: 150 - total flux cleaned = -0.00293095 Jy ! Component: 200 - total flux cleaned = -0.000426475 Jy ! Total flux subtracted in 200 components = -0.000426475 Jy ! Clean residual min=-0.026956 max=0.024896 Jy/beam ! Clean residual mean=-0.000324 rms=0.005964 Jy/beam ! Combined flux in latest and established models = 10.4623 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 172 components and 10.4623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360954Jy sigma=0.446214 ! Fit after self-cal, rms=0.342360Jy sigma=0.352987 wmodel /scr/pima/rv100_uvs/J0927+3902_X_map.mod ! Writing 172 model components to file: /scr/pima/rv100_uvs/J0927+3902_X_map.mod wobs /scr/pima/rv100_uvs/J0927+3902_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J0927+3902_X_uvs.fits wwins /scr/pima/rv100_uvs/J0927+3902_X_map.win ! wwins: Wrote 12 windows to /scr/pima/rv100_uvs/J0927+3902_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00879439 Jy ! Component: 100 - total flux cleaned = -0.0144392 Jy ! Component: 150 - total flux cleaned = -0.0198898 Jy ! Component: 200 - total flux cleaned = -0.0247837 Jy ! Component: 250 - total flux cleaned = -0.0307714 Jy ! Component: 300 - total flux cleaned = -0.035862 Jy ! Component: 350 - total flux cleaned = -0.0404762 Jy ! Component: 400 - total flux cleaned = -0.044643 Jy ! Component: 450 - total flux cleaned = -0.048747 Jy ! Component: 500 - total flux cleaned = -0.0527955 Jy ! Component: 550 - total flux cleaned = -0.0564337 Jy ! Component: 600 - total flux cleaned = -0.0607503 Jy ! Component: 650 - total flux cleaned = -0.0653686 Jy ! Component: 700 - total flux cleaned = -0.0692314 Jy ! Component: 750 - total flux cleaned = -0.0727063 Jy ! Component: 800 - total flux cleaned = -0.0768344 Jy ! Component: 850 - total flux cleaned = -0.0799015 Jy ! Component: 900 - total flux cleaned = -0.0836165 Jy ! Component: 950 - total flux cleaned = -0.0869599 Jy ! Component: 1000 - total flux cleaned = -0.0899468 Jy ! Component: 1050 - total flux cleaned = -0.0935658 Jy ! Component: 1100 - total flux cleaned = -0.0964955 Jy ! Component: 1150 - total flux cleaned = -0.0997293 Jy ! Component: 1200 - total flux cleaned = -0.101975 Jy ! Component: 1250 - total flux cleaned = -0.105795 Jy ! Component: 1300 - total flux cleaned = -0.108322 Jy ! Component: 1350 - total flux cleaned = -0.112088 Jy ! Component: 1400 - total flux cleaned = -0.113955 Jy ! Component: 1450 - total flux cleaned = -0.116739 Jy ! Component: 1500 - total flux cleaned = -0.118894 Jy ! Component: 1550 - total flux cleaned = -0.121337 Jy ! Component: 1600 - total flux cleaned = -0.123462 Jy ! Component: 1650 - total flux cleaned = -0.125877 Jy ! Component: 1700 - total flux cleaned = -0.128573 Jy ! Component: 1750 - total flux cleaned = -0.130361 Jy ! Component: 1800 - total flux cleaned = -0.133027 Jy ! Component: 1850 - total flux cleaned = -0.134794 Jy ! Component: 1900 - total flux cleaned = -0.136843 Jy ! Component: 1950 - total flux cleaned = -0.140044 Jy ! Component: 2000 - total flux cleaned = -0.141491 Jy ! Component: 2050 - total flux cleaned = -0.144083 Jy ! Component: 2100 - total flux cleaned = -0.146086 Jy ! Component: 2150 - total flux cleaned = -0.148362 Jy ! Component: 2200 - total flux cleaned = -0.150346 Jy ! Component: 2250 - total flux cleaned = -0.152319 Jy ! Component: 2300 - total flux cleaned = -0.154558 Jy ! Component: 2350 - total flux cleaned = -0.156229 Jy ! Component: 2400 - total flux cleaned = -0.158724 Jy ! Component: 2450 - total flux cleaned = -0.160378 Jy ! Component: 2500 - total flux cleaned = -0.162572 Jy ! Component: 2550 - total flux cleaned = -0.165031 Jy ! Component: 2600 - total flux cleaned = -0.166931 Jy ! Component: 2650 - total flux cleaned = -0.168821 Jy ! Component: 2700 - total flux cleaned = -0.170971 Jy ! Component: 2750 - total flux cleaned = -0.173109 Jy ! Component: 2800 - total flux cleaned = -0.175237 Jy ! Component: 2850 - total flux cleaned = -0.17656 Jy ! Component: 2900 - total flux cleaned = -0.17788 Jy ! Component: 2950 - total flux cleaned = -0.179452 Jy ! Component: 3000 - total flux cleaned = -0.18154 Jy ! Component: 3050 - total flux cleaned = -0.183358 Jy ! Component: 3100 - total flux cleaned = -0.184391 Jy ! Component: 3150 - total flux cleaned = -0.186963 Jy ! Component: 3200 - total flux cleaned = -0.188499 Jy ! Component: 3250 - total flux cleaned = -0.189519 Jy ! Component: 3300 - total flux cleaned = -0.191296 Jy ! Component: 3350 - total flux cleaned = -0.193063 Jy ! Component: 3400 - total flux cleaned = -0.194572 Jy ! Component: 3450 - total flux cleaned = -0.196073 Jy ! Component: 3500 - total flux cleaned = -0.197819 Jy ! Component: 3550 - total flux cleaned = -0.200052 Jy ! Component: 3600 - total flux cleaned = -0.201287 Jy ! Component: 3650 - total flux cleaned = -0.202517 Jy ! Component: 3700 - total flux cleaned = -0.203986 Jy ! Component: 3750 - total flux cleaned = -0.204717 Jy ! Component: 3800 - total flux cleaned = -0.206658 Jy ! Component: 3850 - total flux cleaned = -0.207384 Jy ! Component: 3900 - total flux cleaned = -0.20955 Jy ! Component: 3950 - total flux cleaned = -0.210508 Jy ! Component: 4000 - total flux cleaned = -0.21194 Jy ! Component: 4050 - total flux cleaned = -0.213841 Jy ! Total flux subtracted in 4096 components = -0.21384 Jy ! Clean residual min=-0.012435 max=0.011819 Jy/beam ! Clean residual mean=-0.000170 rms=0.004037 Jy/beam ! Combined flux in latest and established models = 10.2485 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 456 components and 10.2485 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J0927+3902_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6583 x 0.9536 at 21.85 degrees (North through East) ! Clean map min=-0.023845 max=5.8067 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0927+3902_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 5.80672 invert ! Inverting map ! Your choice of large map pixels excluded 3.17% of the data. ! The y-axis pixel size should ideally be below 0.1646 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00401531 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.207448 0.207448 0.414896 0.829793 1.65959 3.31917 6.63834 13.2767 26.5534 53.1067 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 5.806 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1446.14 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J0927+3902_X_uvs.log closed on Mon Feb 29 13:26:42 2016