! Started logfile: /scr/pima/rv100_uvs/J0730-1141_X_uvs.log on Mon Feb 29 13:26:13 2016
obs /scr/pima/rv100_uvs/J0730-1141_X_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J0730-1141_X_uva.fits
! AN table 1: 24 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.269697 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0730-1141
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 1424 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0730-1141_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=3.773085Jy  sigma=13.880432
! Fit after  self-cal, rms=2.651190Jy  sigma=9.851535
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.5142 mas, bmaj=1.054 mas, bpa=21.1 degrees
! Estimated noise=7.17812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.81319 Jy
! Component: 100  -  total flux cleaned = 3.44054 Jy
! Total flux subtracted in 100 components = 3.44054 Jy
! Clean residual min=-0.109186 max=0.209969 Jy/beam
! Clean residual mean=0.000642 rms=0.017958 Jy/beam
! Combined flux in latest and established models = 3.44054 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 3.44054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.460423Jy  sigma=1.586066
! Fit after  self-cal, rms=0.460394Jy  sigma=1.586010
! Inverting map 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.218682 Jy
! Component: 100  -  total flux cleaned = 0.33218 Jy
! Total flux subtracted in 100 components = 0.33218 Jy
! Clean residual min=-0.073900 max=0.101012 Jy/beam
! Clean residual mean=0.000195 rms=0.012353 Jy/beam
! Combined flux in latest and established models = 3.77272 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 3.77272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.348617Jy  sigma=1.093053
! Fit after  self-cal, rms=0.348575Jy  sigma=1.092666
! Inverting map 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (-1.6, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0648248 Jy
! Component: 100  -  total flux cleaned = 0.0828029 Jy
! Total flux subtracted in 100 components = 0.0828029 Jy
! Clean residual min=-0.063125 max=0.071586 Jy/beam
! Clean residual mean=0.000082 rms=0.010941 Jy/beam
! Combined flux in latest and established models = 3.85553 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 3.85553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.317794Jy  sigma=0.990602
! Fit after  self-cal, rms=0.317119Jy  sigma=0.986164
! Inverting map 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (-0.4, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0286711 Jy
! Component: 100  -  total flux cleaned = 0.0380605 Jy
! Total flux subtracted in 100 components = 0.0380605 Jy
! Clean residual min=-0.053203 max=0.056639 Jy/beam
! Clean residual mean=0.000031 rms=0.010025 Jy/beam
! Combined flux in latest and established models = 3.89359 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 3.89359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.298436Jy  sigma=0.927660
! Fit after  self-cal, rms=0.298234Jy  sigma=0.926462
! Inverting map 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.604 mas, bmaj=1.163 mas, bpa=19.1 degrees
! Estimated noise=6.25457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.8, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0507951 Jy
! Component: 100  -  total flux cleaned = 0.0557803 Jy
! Component: 150  -  total flux cleaned = 0.0602689 Jy
! Component: 200  -  total flux cleaned = 0.0629561 Jy
! Total flux subtracted in 200 components = 0.0629561 Jy
! Clean residual min=-0.042341 max=0.052034 Jy/beam
! Clean residual mean=-0.001732 rms=0.009754 Jy/beam
! Combined flux in latest and established models = 3.95654 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 3.95654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277316Jy  sigma=0.856006
! Fit after  self-cal, rms=0.276408Jy  sigma=0.851849
! Inverting map 
! Your choice of large map pixels excluded 6.95% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.604 x 1.163 at 19.1 degrees (North through East)
! Clean map  min=-0.040087  max=3.5925 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.92     HN        1.00     KP        0.97     LA        1.01     
!   MA        1.01     MK        0.99     NL        1.00     OV        1.02     
!   PT        0.97     SC        0.99     WF        1.02     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        1.03     HN        1.00     KP        0.98     LA        1.01     
!   MA        1.00     MK        0.97     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.00*    WF        1.02     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.95     HN        1.00     KP        0.97     LA        1.01     
!   MA        1.05     MK        0.99     NL        1.02     OV        1.03     
!   PT        0.98     SC        0.94     WF        1.05     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        1.03     HN        1.02     KP        0.95     LA        1.02     
!   MA        1.05     MK        1.01     NL        1.01     OV        1.02     
!   PT        0.98     SC        0.97     WF        1.02     
! 
! 
! Fit before self-cal, rms=0.276408Jy  sigma=0.851849
! Fit after  self-cal, rms=0.223287Jy  sigma=0.657267
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6045 mas, bmaj=1.189 mas, bpa=18.78 degrees
! Estimated noise=6.35907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011143 Jy
! Component: 100  -  total flux cleaned = 0.0061896 Jy
! Component: 150  -  total flux cleaned = 0.00977702 Jy
! Component: 200  -  total flux cleaned = 0.0113266 Jy
! Total flux subtracted in 200 components = 0.0113266 Jy
! Clean residual min=-0.026556 max=0.034711 Jy/beam
! Clean residual mean=0.000212 rms=0.007328 Jy/beam
! Combined flux in latest and established models = 3.96787 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 3.96787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212802Jy  sigma=0.624388
! Fit after  self-cal, rms=0.212433Jy  sigma=0.622869
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212433Jy  sigma=0.622869
! Fit after  self-cal, rms=0.162849Jy  sigma=0.461152
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6038 mas, bmaj=1.182 mas, bpa=18.89 degrees
! Estimated noise=6.35502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222295 Jy
! Component: 100  -  total flux cleaned = 0.0336683 Jy
! Component: 150  -  total flux cleaned = 0.0363297 Jy
! Component: 200  -  total flux cleaned = 0.0382054 Jy
! Total flux subtracted in 200 components = 0.0382054 Jy
! Clean residual min=-0.018575 max=0.023746 Jy/beam
! Clean residual mean=0.000832 rms=0.004639 Jy/beam
! Combined flux in latest and established models = 4.00607 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 4.00607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156806Jy  sigma=0.444126
! Fit after  self-cal, rms=0.156432Jy  sigma=0.443205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17.4, -22).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210136 Jy
! Component: 100  -  total flux cleaned = 0.029805 Jy
! Component: 150  -  total flux cleaned = 0.0333035 Jy
! Component: 200  -  total flux cleaned = 0.0352799 Jy
! Total flux subtracted in 200 components = 0.0352799 Jy
! Clean residual min=-0.017832 max=0.019424 Jy/beam
! Clean residual mean=0.000255 rms=0.004319 Jy/beam
! Combined flux in latest and established models = 4.04135 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 63 components and 4.04135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151781Jy  sigma=0.430773
! Fit after  self-cal, rms=0.151658Jy  sigma=0.429710
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (0.2, 11.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169015 Jy
! Component: 100  -  total flux cleaned = 0.0226269 Jy
! Component: 150  -  total flux cleaned = 0.0244232 Jy
! Component: 200  -  total flux cleaned = 0.0257704 Jy
! Total flux subtracted in 200 components = 0.0257704 Jy
! Clean residual min=-0.017884 max=0.017673 Jy/beam
! Clean residual mean=-0.000164 rms=0.004103 Jy/beam
! Combined flux in latest and established models = 4.06712 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 4.06712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149135Jy  sigma=0.421680
! Fit after  self-cal, rms=0.149018Jy  sigma=0.420961
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149018Jy  sigma=0.420961
! Fit after  self-cal, rms=0.127021Jy  sigma=0.348165
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6043 mas, bmaj=1.181 mas, bpa=18.88 degrees
! Estimated noise=6.36201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00532872 Jy
! Component: 100  -  total flux cleaned = 0.00599071 Jy
! Component: 150  -  total flux cleaned = 0.00748492 Jy
! Component: 200  -  total flux cleaned = 0.0080177 Jy
! Total flux subtracted in 200 components = 0.0080177 Jy
! Clean residual min=-0.010900 max=0.013660 Jy/beam
! Clean residual mean=0.000245 rms=0.002599 Jy/beam
! Combined flux in latest and established models = 4.07514 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 4.07514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125406Jy  sigma=0.343313
! Fit after  self-cal, rms=0.125236Jy  sigma=0.343034
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, 3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127953 Jy
! Component: 100  -  total flux cleaned = 0.0170084 Jy
! Component: 150  -  total flux cleaned = 0.0175216 Jy
! Component: 200  -  total flux cleaned = 0.0175221 Jy
! Total flux subtracted in 200 components = 0.0175221 Jy
! Clean residual min=-0.010593 max=0.010843 Jy/beam
! Clean residual mean=-0.000045 rms=0.002390 Jy/beam
! Combined flux in latest and established models = 4.09266 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 4.09266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123376Jy  sigma=0.336684
! Fit after  self-cal, rms=0.123219Jy  sigma=0.336047
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (-48.4, -48.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00673752 Jy
! Component: 100  -  total flux cleaned = 0.00672804 Jy
! Component: 150  -  total flux cleaned = 0.00651251 Jy
! Component: 200  -  total flux cleaned = 0.00671933 Jy
! Total flux subtracted in 200 components = 0.00671933 Jy
! Clean residual min=-0.010455 max=0.010106 Jy/beam
! Clean residual mean=-0.000124 rms=0.002286 Jy/beam
! Combined flux in latest and established models = 4.09938 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 112 components and 4.09938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122072Jy  sigma=0.332114
! Fit after  self-cal, rms=0.121961Jy  sigma=0.331781
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121961Jy  sigma=0.331781
! Fit after  self-cal, rms=0.121006Jy  sigma=0.329474
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=1.827 mas, bmaj=3.42 mas, bpa=-12.84 degrees
! Estimated noise=9.11569 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115802 Jy
! Component: 100  -  total flux cleaned = 0.0171945 Jy
! Component: 150  -  total flux cleaned = 0.0186149 Jy
! Component: 200  -  total flux cleaned = 0.0193932 Jy
! Total flux subtracted in 200 components = 0.0193932 Jy
! Clean residual min=-0.012490 max=0.009618 Jy/beam
! Clean residual mean=-0.000605 rms=0.002903 Jy/beam
! Combined flux in latest and established models = 4.11878 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 133 components and 4.11878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120564Jy  sigma=0.327317
! Fit after  self-cal, rms=0.120484Jy  sigma=0.326891
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00146415 Jy
! Component: 100  -  total flux cleaned = 0.001328 Jy
! Component: 150  -  total flux cleaned = 0.00132392 Jy
! Component: 200  -  total flux cleaned = 0.00120559 Jy
! Total flux subtracted in 200 components = 0.00120559 Jy
! Clean residual min=-0.012570 max=0.009797 Jy/beam
! Clean residual mean=-0.000673 rms=0.002849 Jy/beam
! Combined flux in latest and established models = 4.11998 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 142 components and 4.11998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120380Jy  sigma=0.326597
! Fit after  self-cal, rms=0.120386Jy  sigma=0.326500
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6043 mas, bmaj=1.18 mas, bpa=18.88 degrees
! Estimated noise=6.36589 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6043 x 1.18 at 18.88 degrees (North through East)
! Clean map  min=-0.022648  max=3.5815 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120386Jy  sigma=0.326500
! Fit after  self-cal, rms=0.109638Jy  sigma=0.288690
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6042 mas, bmaj=1.18 mas, bpa=18.87 degrees
! Estimated noise=6.36926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000646342 Jy
! Component: 100  -  total flux cleaned = 0.000549071 Jy
! Component: 150  -  total flux cleaned = 0.000757099 Jy
! Component: 200  -  total flux cleaned = 0.000755021 Jy
! Total flux subtracted in 200 components = 0.000755021 Jy
! Clean residual min=-0.009763 max=0.009380 Jy/beam
! Clean residual mean=-0.000085 rms=0.002106 Jy/beam
! Combined flux in latest and established models = 4.12074 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 146 components and 4.12074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108672Jy  sigma=0.285715
! Fit after  self-cal, rms=0.108563Jy  sigma=0.285552
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00038988 Jy
! Component: 100  -  total flux cleaned = -0.000210015 Jy
! Component: 150  -  total flux cleaned = -0.000207849 Jy
! Component: 200  -  total flux cleaned = -5.36736e-05 Jy
! Total flux subtracted in 200 components = -5.36736e-05 Jy
! Clean residual min=-0.009329 max=0.009085 Jy/beam
! Clean residual mean=-0.000087 rms=0.002070 Jy/beam
! Combined flux in latest and established models = 4.12068 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 150 components and 4.12068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108006Jy  sigma=0.284022
! Fit after  self-cal, rms=0.107976Jy  sigma=0.283974
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107976Jy  sigma=0.283974
! Fit after  self-cal, rms=0.107769Jy  sigma=0.283381
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.5157 mas, bmaj=1.074 mas, bpa=20.77 degrees
! Estimated noise=7.26066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.79705 Jy
! Component: 100  -  total flux cleaned = 3.41897 Jy
! Component: 150  -  total flux cleaned = 3.63006 Jy
! Component: 200  -  total flux cleaned = 3.7393 Jy
! Total flux subtracted in 200 components = 3.7393 Jy
! Clean residual min=-0.034625 max=0.066052 Jy/beam
! Clean residual mean=0.000537 rms=0.007433 Jy/beam
! Combined flux in latest and established models = 3.7393 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 3.7393 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6043 mas, bmaj=1.18 mas, bpa=18.88 degrees
! Estimated noise=6.37237 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101651 Jy
! Component: 100  -  total flux cleaned = 0.171375 Jy
! Component: 150  -  total flux cleaned = 0.22083 Jy
! Component: 200  -  total flux cleaned = 0.257727 Jy
! Total flux subtracted in 200 components = 0.257727 Jy
! Clean residual min=-0.018947 max=0.029360 Jy/beam
! Clean residual mean=0.002011 rms=0.004269 Jy/beam
! Combined flux in latest and established models = 3.99702 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 28 components and 3.99702 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (0.8, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248825 Jy
! Component: 100  -  total flux cleaned = 0.0342412 Jy
! Component: 150  -  total flux cleaned = 0.0426979 Jy
! Component: 200  -  total flux cleaned = 0.0504438 Jy
! Total flux subtracted in 200 components = 0.0504438 Jy
! Clean residual min=-0.015443 max=0.019683 Jy/beam
! Clean residual mean=0.001177 rms=0.003447 Jy/beam
! Combined flux in latest and established models = 4.04747 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 49 components and 4.04747 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (3.8, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00944544 Jy
! Component: 100  -  total flux cleaned = 0.01321 Jy
! Component: 150  -  total flux cleaned = 0.0174961 Jy
! Component: 200  -  total flux cleaned = 0.020186 Jy
! Total flux subtracted in 200 components = 0.020186 Jy
! Clean residual min=-0.013609 max=0.016021 Jy/beam
! Clean residual mean=0.000850 rms=0.003017 Jy/beam
! Combined flux in latest and established models = 4.06765 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 60 components and 4.06765 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (-6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580794 Jy
! Component: 100  -  total flux cleaned = 0.00825028 Jy
! Component: 150  -  total flux cleaned = 0.0105902 Jy
! Component: 200  -  total flux cleaned = 0.0133852 Jy
! Total flux subtracted in 200 components = 0.0133852 Jy
! Clean residual min=-0.011152 max=0.013290 Jy/beam
! Clean residual mean=0.000633 rms=0.002685 Jy/beam
! Combined flux in latest and established models = 4.08104 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 73 components and 4.08104 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (17.4, 21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00686536 Jy
! Component: 100  -  total flux cleaned = 0.00838428 Jy
! Component: 150  -  total flux cleaned = 0.0103363 Jy
! Component: 200  -  total flux cleaned = 0.012671 Jy
! Total flux subtracted in 200 components = 0.012671 Jy
! Clean residual min=-0.010733 max=0.010797 Jy/beam
! Clean residual mean=0.000431 rms=0.002440 Jy/beam
! Combined flux in latest and established models = 4.09371 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 80 components and 4.09371 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Added new window around map position (-6.4, 10.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418551 Jy
! Component: 100  -  total flux cleaned = 0.00634393 Jy
! Component: 150  -  total flux cleaned = 0.00799955 Jy
! Component: 200  -  total flux cleaned = 0.00958713 Jy
! Total flux subtracted in 200 components = 0.00958713 Jy
! Clean residual min=-0.010418 max=0.009814 Jy/beam
! Clean residual mean=0.000278 rms=0.002254 Jy/beam
! Combined flux in latest and established models = 4.1033 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 87 components and 4.1033 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=1.825 mas, bmaj=3.42 mas, bpa=-12.82 degrees
! Estimated noise=9.12958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105225 Jy
! Component: 100  -  total flux cleaned = 0.0178545 Jy
! Component: 150  -  total flux cleaned = 0.0234477 Jy
! Component: 200  -  total flux cleaned = 0.027346 Jy
! Total flux subtracted in 200 components = 0.027346 Jy
! Clean residual min=-0.010880 max=0.007411 Jy/beam
! Clean residual mean=-0.000430 rms=0.002492 Jy/beam
! Combined flux in latest and established models = 4.13065 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00236072 Jy
! Component: 100  -  total flux cleaned = 0.00439434 Jy
! Component: 150  -  total flux cleaned = 0.00530356 Jy
! Component: 200  -  total flux cleaned = 0.00593797 Jy
! Total flux subtracted in 200 components = 0.00593797 Jy
! Clean residual min=-0.010582 max=0.006718 Jy/beam
! Clean residual mean=-0.000707 rms=0.002371 Jy/beam
! Combined flux in latest and established models = 4.13658 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 133 components and 4.13658 Jy
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! Estimated beam: bmin=0.6043 mas, bmaj=1.18 mas, bpa=18.88 degrees
! Estimated noise=6.37237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00688949 Jy
! Component: 100  -  total flux cleaned = -0.00726454 Jy
! Component: 150  -  total flux cleaned = -0.00727642 Jy
! Component: 200  -  total flux cleaned = -0.0072923 Jy
! Total flux subtracted in 200 components = -0.0072923 Jy
! Clean residual min=-0.010118 max=0.008230 Jy/beam
! Clean residual mean=-0.000130 rms=0.002028 Jy/beam
! Combined flux in latest and established models = 4.12929 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 138 components and 4.12929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110300Jy  sigma=0.296465
! Fit after  self-cal, rms=0.109569Jy  sigma=0.293274
wmodel /scr/pima/rv100_uvs/J0730-1141_X_map.mod
! Writing 138 model components to file: /scr/pima/rv100_uvs/J0730-1141_X_map.mod
wobs /scr/pima/rv100_uvs/J0730-1141_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J0730-1141_X_uvs.fits
wwins /scr/pima/rv100_uvs/J0730-1141_X_map.win
! wwins: Wrote 14 windows to /scr/pima/rv100_uvs/J0730-1141_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00306914 Jy
! Component: 100  -  total flux cleaned = -0.00446305 Jy
! Component: 150  -  total flux cleaned = -0.0061001 Jy
! Component: 200  -  total flux cleaned = -0.00725856 Jy
! Component: 250  -  total flux cleaned = -0.00867276 Jy
! Component: 300  -  total flux cleaned = -0.00950087 Jy
! Component: 350  -  total flux cleaned = -0.0101772 Jy
! Component: 400  -  total flux cleaned = -0.010841 Jy
! Component: 450  -  total flux cleaned = -0.0112328 Jy
! Component: 500  -  total flux cleaned = -0.0118802 Jy
! Component: 550  -  total flux cleaned = -0.0127721 Jy
! Component: 600  -  total flux cleaned = -0.0132748 Jy
! Component: 650  -  total flux cleaned = -0.0140188 Jy
! Component: 700  -  total flux cleaned = -0.0145079 Jy
! Component: 750  -  total flux cleaned = -0.0153547 Jy
! Component: 800  -  total flux cleaned = -0.015713 Jy
! Component: 850  -  total flux cleaned = -0.0164209 Jy
! Component: 900  -  total flux cleaned = -0.0167718 Jy
! Component: 950  -  total flux cleaned = -0.0172344 Jy
! Component: 1000  -  total flux cleaned = -0.0178059 Jy
! Component: 1050  -  total flux cleaned = -0.0182576 Jy
! Component: 1100  -  total flux cleaned = -0.0188166 Jy
! Component: 1150  -  total flux cleaned = -0.01937 Jy
! Component: 1200  -  total flux cleaned = -0.0198085 Jy
! Component: 1250  -  total flux cleaned = -0.0203508 Jy
! Component: 1300  -  total flux cleaned = -0.020887 Jy
! Component: 1350  -  total flux cleaned = -0.0215246 Jy
! Component: 1400  -  total flux cleaned = -0.0220504 Jy
! Component: 1450  -  total flux cleaned = -0.0223637 Jy
! Component: 1500  -  total flux cleaned = -0.0230867 Jy
! Component: 1550  -  total flux cleaned = -0.0236994 Jy
! Component: 1600  -  total flux cleaned = -0.024004 Jy
! Component: 1650  -  total flux cleaned = -0.024507 Jy
! Component: 1700  -  total flux cleaned = -0.0254039 Jy
! Component: 1750  -  total flux cleaned = -0.0257984 Jy
! Component: 1800  -  total flux cleaned = -0.0263868 Jy
! Component: 1850  -  total flux cleaned = -0.0270672 Jy
! Component: 1900  -  total flux cleaned = -0.027645 Jy
! Component: 1950  -  total flux cleaned = -0.0281232 Jy
! Component: 2000  -  total flux cleaned = -0.0285982 Jy
! Component: 2050  -  total flux cleaned = -0.0288809 Jy
! Component: 2100  -  total flux cleaned = -0.0296291 Jy
! Component: 2150  -  total flux cleaned = -0.0303704 Jy
! Component: 2200  -  total flux cleaned = -0.0308306 Jy
! Component: 2250  -  total flux cleaned = -0.0313788 Jy
! Component: 2300  -  total flux cleaned = -0.0317417 Jy
! Component: 2350  -  total flux cleaned = -0.0321916 Jy
! Component: 2400  -  total flux cleaned = -0.0328176 Jy
! Component: 2450  -  total flux cleaned = -0.0331724 Jy
! Component: 2500  -  total flux cleaned = -0.033613 Jy
! Component: 2550  -  total flux cleaned = -0.0340506 Jy
! Component: 2600  -  total flux cleaned = -0.0343984 Jy
! Component: 2650  -  total flux cleaned = -0.0350897 Jy
! Component: 2700  -  total flux cleaned = -0.0354325 Jy
! Component: 2750  -  total flux cleaned = -0.0356877 Jy
! Component: 2800  -  total flux cleaned = -0.0361108 Jy
! Component: 2850  -  total flux cleaned = -0.0364477 Jy
! Component: 2900  -  total flux cleaned = -0.0370324 Jy
! Component: 2950  -  total flux cleaned = -0.0371982 Jy
! Component: 3000  -  total flux cleaned = -0.0376101 Jy
! Component: 3050  -  total flux cleaned = -0.0381012 Jy
! Component: 3100  -  total flux cleaned = -0.0383448 Jy
! Component: 3150  -  total flux cleaned = -0.0386687 Jy
! Component: 3200  -  total flux cleaned = -0.0390708 Jy
! Component: 3250  -  total flux cleaned = -0.0394699 Jy
! Component: 3300  -  total flux cleaned = -0.0397874 Jy
! Component: 3350  -  total flux cleaned = -0.0401825 Jy
! Component: 3400  -  total flux cleaned = -0.0402615 Jy
! Component: 3450  -  total flux cleaned = -0.0408078 Jy
! Component: 3500  -  total flux cleaned = -0.0409628 Jy
! Component: 3550  -  total flux cleaned = -0.0415025 Jy
! Component: 3600  -  total flux cleaned = -0.041656 Jy
! Component: 3650  -  total flux cleaned = -0.0420376 Jy
! Component: 3700  -  total flux cleaned = -0.0423407 Jy
! Component: 3750  -  total flux cleaned = -0.0427929 Jy
! Component: 3800  -  total flux cleaned = -0.0430182 Jy
! Component: 3850  -  total flux cleaned = -0.0434656 Jy
! Component: 3900  -  total flux cleaned = -0.0436885 Jy
! Component: 3950  -  total flux cleaned = -0.0440578 Jy
! Component: 4000  -  total flux cleaned = -0.0444244 Jy
! Component: 4050  -  total flux cleaned = -0.0448626 Jy
! Total flux subtracted in 4096 components = -0.0450074 Jy
! Clean residual min=-0.004928 max=0.003624 Jy/beam
! Clean residual mean=-0.000013 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 4.08429 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 449 components and 4.08428 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J0730-1141_X\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6043 x 1.18 at 18.88 degrees (North through East)
! Clean map  min=-0.0081929  max=3.5589 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0730-1141_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 3.55891 
invert
! Inverting map 
! Your choice of large map pixels excluded 7.22% of the data.
!  The x-axis pixel size should ideally be below 0.1661 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00117111 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0987192 0.0987192 0.197438 0.394877 0.789754 1.57951 3.15901 6.31803 12.6361 25.2721 50.5442
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0035 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       3.558 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3038.92 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J0730-1141_X_uvs.log closed on Mon Feb 29 13:26:18 2016