! Started logfile: /scr/pima/rv100_uvs/J0706-2311_S_uvs.log on Mon Feb 29 13:26:13 2016
obs /scr/pima/rv100_uvs/J0706-2311_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J0706-2311_S_uva.fits
! AN table 1: 44 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.443723 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0706-2311
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 1640 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0706-2311_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001226Jy  sigma=14.824255
! Fit after  self-cal, rms=0.933927Jy  sigma=14.010010
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.72 mas, bmaj=12.56 mas, bpa=8.608 degrees
! Estimated noise=2.14292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0537135 Jy
! Component: 100  -  total flux cleaned = 0.0682868 Jy
! Total flux subtracted in 100 components = 0.0682868 Jy
! Clean residual min=-0.009701 max=0.009752 Jy/beam
! Clean residual mean=-0.000021 rms=0.003252 Jy/beam
! Combined flux in latest and established models = 0.0682868 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0682868 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060713Jy  sigma=0.911214
! Fit after  self-cal, rms=0.059229Jy  sigma=0.886849
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.541 mas, bmaj=15.39 mas, bpa=-0.2883 degrees
! Estimated noise=1.21481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00746519 Jy
! Component: 100  -  total flux cleaned = 0.0116366 Jy
! Component: 150  -  total flux cleaned = 0.014289 Jy
! Component: 200  -  total flux cleaned = 0.0160265 Jy
! Total flux subtracted in 200 components = 0.0160265 Jy
! Clean residual min=-0.008318 max=0.008189 Jy/beam
! Clean residual mean=-0.000005 rms=0.002479 Jy/beam
! Combined flux in latest and established models = 0.0843133 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 47 components and 0.0843133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058375Jy  sigma=0.870154
! Fit after  self-cal, rms=0.058420Jy  sigma=0.869297
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.541 x 15.39 at -0.2883 degrees (North through East)
! Clean map  min=-0.0085128  max=0.071018 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.04     KP        1.08     LA        1.12     NL        0.89     
!   OV        1.07     PT        1.01     SC        1.14     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.00*    KP        1.00*    LA        1.00*    NL        1.00*    
!   OV        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.058420Jy  sigma=0.869297
! Fit after  self-cal, rms=0.058813Jy  sigma=0.867296
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.497 mas, bmaj=15.43 mas, bpa=-0.589 degrees
! Estimated noise=1.22392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00280536 Jy
! Component: 100  -  total flux cleaned = 0.00450836 Jy
! Component: 150  -  total flux cleaned = 0.00564598 Jy
! Component: 200  -  total flux cleaned = 0.00633204 Jy
! Total flux subtracted in 200 components = 0.00633204 Jy
! Clean residual min=-0.008219 max=0.008130 Jy/beam
! Clean residual mean=-0.000002 rms=0.002397 Jy/beam
! Combined flux in latest and established models = 0.0906453 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.0906453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058700Jy  sigma=0.864439
! Fit after  self-cal, rms=0.058778Jy  sigma=0.864142
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058778Jy  sigma=0.864142
! Fit after  self-cal, rms=0.058880Jy  sigma=0.862595
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.478 mas, bmaj=15.46 mas, bpa=-0.7802 degrees
! Estimated noise=1.22405 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132491 Jy
! Component: 100  -  total flux cleaned = 0.00162949 Jy
! Component: 150  -  total flux cleaned = 0.00183011 Jy
! Component: 200  -  total flux cleaned = 0.00200429 Jy
! Total flux subtracted in 200 components = 0.00200429 Jy
! Clean residual min=-0.008048 max=0.007673 Jy/beam
! Clean residual mean=0.000004 rms=0.002298 Jy/beam
! Combined flux in latest and established models = 0.0926496 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 60 components and 0.0926496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058852Jy  sigma=0.861791
! Fit after  self-cal, rms=0.058946Jy  sigma=0.861492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60898e-05 Jy
! Component: 100  -  total flux cleaned = -5.7589e-05 Jy
! Component: 150  -  total flux cleaned = -9.8544e-05 Jy
! Component: 200  -  total flux cleaned = -7.89419e-05 Jy
! Total flux subtracted in 200 components = -7.89419e-05 Jy
! Clean residual min=-0.007955 max=0.007674 Jy/beam
! Clean residual mean=0.000003 rms=0.002298 Jy/beam
! Combined flux in latest and established models = 0.0925707 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 0.0925707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058933Jy  sigma=0.861262
! Fit after  self-cal, rms=0.058859Jy  sigma=0.860290
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058859Jy  sigma=0.860290
! Fit after  self-cal, rms=0.059224Jy  sigma=0.860624
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.483 mas, bmaj=15.4 mas, bpa=-0.616 degrees
! Estimated noise=1.2291 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150922 Jy
! Component: 100  -  total flux cleaned = 0.000149818 Jy
! Component: 150  -  total flux cleaned = 0.00014991 Jy
! Component: 200  -  total flux cleaned = 0.000169556 Jy
! Total flux subtracted in 200 components = 0.000169556 Jy
! Clean residual min=-0.008323 max=0.007817 Jy/beam
! Clean residual mean=0.000001 rms=0.002334 Jy/beam
! Combined flux in latest and established models = 0.0927402 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 73 components and 0.0927402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059210Jy  sigma=0.860391
! Fit after  self-cal, rms=0.059249Jy  sigma=0.860283
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000172479 Jy
! Component: 100  -  total flux cleaned = -0.000172776 Jy
! Component: 150  -  total flux cleaned = -0.000153489 Jy
! Component: 200  -  total flux cleaned = -0.000134996 Jy
! Total flux subtracted in 200 components = -0.000134996 Jy
! Clean residual min=-0.008229 max=0.007825 Jy/beam
! Clean residual mean=0.000001 rms=0.002330 Jy/beam
! Combined flux in latest and established models = 0.0926052 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.0926052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059238Jy  sigma=0.860103
! Fit after  self-cal, rms=0.059224Jy  sigma=0.859987
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059224Jy  sigma=0.859987
! Fit after  self-cal, rms=0.059406Jy  sigma=0.860136
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.517 mas, bmaj=21.37 mas, bpa=-5.964 degrees
! Estimated noise=1.26849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235716 Jy
! Component: 100  -  total flux cleaned = 0.000395063 Jy
! Component: 150  -  total flux cleaned = 0.000373199 Jy
! Component: 200  -  total flux cleaned = 0.000351487 Jy
! Total flux subtracted in 200 components = 0.000351487 Jy
! Clean residual min=-0.009499 max=0.009228 Jy/beam
! Clean residual mean=0.000003 rms=0.002857 Jy/beam
! Combined flux in latest and established models = 0.0929567 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 81 components and 0.0929567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059398Jy  sigma=0.859886
! Fit after  self-cal, rms=0.059407Jy  sigma=0.859839
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.74917e-05 Jy
! Component: 100  -  total flux cleaned = 9.77048e-06 Jy
! Component: 150  -  total flux cleaned = -4.71519e-05 Jy
! Component: 200  -  total flux cleaned = -6.51456e-05 Jy
! Total flux subtracted in 200 components = -6.51456e-05 Jy
! Clean residual min=-0.009519 max=0.009196 Jy/beam
! Clean residual mean=0.000004 rms=0.002847 Jy/beam
! Combined flux in latest and established models = 0.0928916 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 86 components and 0.0928916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059401Jy  sigma=0.859687
! Fit after  self-cal, rms=0.059397Jy  sigma=0.859658
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.486 mas, bmaj=15.38 mas, bpa=-0.5534 degrees
! Estimated noise=1.23069 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.486 x 15.38 at -0.5534 degrees (North through East)
! Clean map  min=-0.0079489  max=0.074119 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.681 mas, bmaj=12.52 mas, bpa=8.302 degrees
! Estimated noise=2.15693 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0546839 Jy
! Component: 100  -  total flux cleaned = 0.0711902 Jy
! Component: 150  -  total flux cleaned = 0.0815496 Jy
! Component: 200  -  total flux cleaned = 0.0887627 Jy
! Total flux subtracted in 200 components = 0.0887627 Jy
! Clean residual min=-0.008360 max=0.007527 Jy/beam
! Clean residual mean=-0.000015 rms=0.002519 Jy/beam
! Combined flux in latest and established models = 0.0887627 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0887627 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.486 mas, bmaj=15.38 mas, bpa=-0.5534 degrees
! Estimated noise=1.23069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261997 Jy
! Component: 100  -  total flux cleaned = 0.00351665 Jy
! Component: 150  -  total flux cleaned = 0.00390131 Jy
! Component: 200  -  total flux cleaned = 0.00400175 Jy
! Total flux subtracted in 200 components = 0.00400175 Jy
! Clean residual min=-0.008547 max=0.008440 Jy/beam
! Clean residual mean=0.000000 rms=0.002371 Jy/beam
! Combined flux in latest and established models = 0.0927644 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.0927644 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.517 mas, bmaj=21.37 mas, bpa=-5.964 degrees
! Estimated noise=1.26849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000708303 Jy
! Component: 100  -  total flux cleaned = 0.000545427 Jy
! Component: 150  -  total flux cleaned = 0.000475533 Jy
! Component: 200  -  total flux cleaned = 0.000441489 Jy
! Total flux subtracted in 200 components = 0.000441489 Jy
! Clean residual min=-0.009367 max=0.009411 Jy/beam
! Clean residual mean=0.000003 rms=0.002885 Jy/beam
! Combined flux in latest and established models = 0.0932059 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.33816e-05 Jy
! Component: 100  -  total flux cleaned = -9.31751e-05 Jy
! Component: 150  -  total flux cleaned = -0.000150074 Jy
! Component: 200  -  total flux cleaned = -0.000177861 Jy
! Total flux subtracted in 200 components = -0.000177861 Jy
! Clean residual min=-0.009411 max=0.009379 Jy/beam
! Clean residual mean=0.000003 rms=0.002871 Jy/beam
! Combined flux in latest and established models = 0.0930281 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.0930281 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.486 mas, bmaj=15.38 mas, bpa=-0.5534 degrees
! Estimated noise=1.23069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131816 Jy
! Component: 100  -  total flux cleaned = -0.000250109 Jy
! Component: 150  -  total flux cleaned = -0.000248172 Jy
! Component: 200  -  total flux cleaned = -0.000248364 Jy
! Total flux subtracted in 200 components = -0.000248364 Jy
! Clean residual min=-0.008276 max=0.008017 Jy/beam
! Clean residual mean=0.000001 rms=0.002328 Jy/beam
! Combined flux in latest and established models = 0.0927797 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 60 components and 0.0927797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059399Jy  sigma=0.859753
! Fit after  self-cal, rms=0.059370Jy  sigma=0.859568
wmodel /scr/pima/rv100_uvs/J0706-2311_S_map.mod
! Writing 60 model components to file: /scr/pima/rv100_uvs/J0706-2311_S_map.mod
wobs /scr/pima/rv100_uvs/J0706-2311_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J0706-2311_S_uvs.fits
wwins /scr/pima/rv100_uvs/J0706-2311_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rv100_uvs/J0706-2311_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159622 Jy
! Component: 100  -  total flux cleaned = 8.88826e-05 Jy
! Component: 150  -  total flux cleaned = -0.000613428 Jy
! Component: 200  -  total flux cleaned = -0.00116733 Jy
! Component: 250  -  total flux cleaned = -0.00166082 Jy
! Component: 300  -  total flux cleaned = -0.0026518 Jy
! Component: 350  -  total flux cleaned = -0.00357418 Jy
! Component: 400  -  total flux cleaned = -0.0045012 Jy
! Component: 450  -  total flux cleaned = -0.00499884 Jy
! Component: 500  -  total flux cleaned = -0.00529135 Jy
! Component: 550  -  total flux cleaned = -0.00568301 Jy
! Component: 600  -  total flux cleaned = -0.00605693 Jy
! Component: 650  -  total flux cleaned = -0.00661781 Jy
! Component: 700  -  total flux cleaned = -0.00705735 Jy
! Component: 750  -  total flux cleaned = -0.00734035 Jy
! Component: 800  -  total flux cleaned = -0.00756806 Jy
! Component: 850  -  total flux cleaned = -0.00774352 Jy
! Component: 900  -  total flux cleaned = -0.00787141 Jy
! Component: 950  -  total flux cleaned = -0.00811897 Jy
! Component: 1000  -  total flux cleaned = -0.00828127 Jy
! Component: 1050  -  total flux cleaned = -0.00832136 Jy
! Component: 1100  -  total flux cleaned = -0.00848178 Jy
! Component: 1150  -  total flux cleaned = -0.00860245 Jy
! Component: 1200  -  total flux cleaned = -0.00868282 Jy
! Component: 1250  -  total flux cleaned = -0.00884381 Jy
! Component: 1300  -  total flux cleaned = -0.00900489 Jy
! Component: 1350  -  total flux cleaned = -0.00912614 Jy
! Component: 1400  -  total flux cleaned = -0.00928884 Jy
! Component: 1450  -  total flux cleaned = -0.00937026 Jy
! Component: 1500  -  total flux cleaned = -0.00957442 Jy
! Component: 1550  -  total flux cleaned = -0.00957428 Jy
! Component: 1600  -  total flux cleaned = -0.00961509 Jy
! Component: 1650  -  total flux cleaned = -0.00957343 Jy
! Component: 1700  -  total flux cleaned = -0.00961536 Jy
! Component: 1750  -  total flux cleaned = -0.0097006 Jy
! Component: 1800  -  total flux cleaned = -0.00974275 Jy
! Component: 1850  -  total flux cleaned = -0.00987208 Jy
! Component: 1900  -  total flux cleaned = -0.00995902 Jy
! Component: 1950  -  total flux cleaned = -0.0100913 Jy
! Component: 2000  -  total flux cleaned = -0.0101801 Jy
! Component: 2050  -  total flux cleaned = -0.0101799 Jy
! Component: 2100  -  total flux cleaned = -0.0101346 Jy
! Component: 2150  -  total flux cleaned = -0.0101808 Jy
! Component: 2200  -  total flux cleaned = -0.0100877 Jy
! Component: 2250  -  total flux cleaned = -0.0100404 Jy
! Component: 2300  -  total flux cleaned = -0.00999166 Jy
! Component: 2350  -  total flux cleaned = -0.00994254 Jy
! Component: 2400  -  total flux cleaned = -0.00989303 Jy
! Component: 2450  -  total flux cleaned = -0.00994358 Jy
! Component: 2500  -  total flux cleaned = -0.00989221 Jy
! Component: 2550  -  total flux cleaned = -0.00994411 Jy
! Component: 2600  -  total flux cleaned = -0.010049 Jy
! Component: 2650  -  total flux cleaned = -0.010102 Jy
! Component: 2700  -  total flux cleaned = -0.0102102 Jy
! Component: 2750  -  total flux cleaned = -0.0103729 Jy
! Component: 2800  -  total flux cleaned = -0.0105398 Jy
! Component: 2850  -  total flux cleaned = -0.0106539 Jy
! Component: 2900  -  total flux cleaned = -0.0109397 Jy
! Component: 2950  -  total flux cleaned = -0.010998 Jy
! Component: 3000  -  total flux cleaned = -0.0111747 Jy
! Component: 3050  -  total flux cleaned = -0.0113553 Jy
! Component: 3100  -  total flux cleaned = -0.0115989 Jy
! Component: 3150  -  total flux cleaned = -0.0119078 Jy
! Component: 3200  -  total flux cleaned = -0.0122217 Jy
! Component: 3250  -  total flux cleaned = -0.0127343 Jy
! Component: 3300  -  total flux cleaned = -0.0130611 Jy
! Component: 3350  -  total flux cleaned = -0.0133916 Jy
! Component: 3400  -  total flux cleaned = -0.0138628 Jy
! Component: 3450  -  total flux cleaned = -0.014206 Jy
! Component: 3500  -  total flux cleaned = -0.0146938 Jy
! Component: 3550  -  total flux cleaned = -0.0151197 Jy
! Component: 3600  -  total flux cleaned = -0.0156249 Jy
! Component: 3650  -  total flux cleaned = -0.0159179 Jy
! Component: 3700  -  total flux cleaned = -0.0163665 Jy
! Component: 3750  -  total flux cleaned = -0.0168998 Jy
! Component: 3800  -  total flux cleaned = -0.0171321 Jy
! Component: 3850  -  total flux cleaned = -0.0177628 Jy
! Component: 3900  -  total flux cleaned = -0.0180842 Jy
! Component: 3950  -  total flux cleaned = -0.0185744 Jy
! Component: 4000  -  total flux cleaned = -0.0190739 Jy
! Component: 4050  -  total flux cleaned = -0.0194133 Jy
! Total flux subtracted in 4096 components = -0.0199319 Jy
! Clean residual min=-0.005071 max=0.004814 Jy/beam
! Clean residual mean=0.000017 rms=0.001597 Jy/beam
! Combined flux in latest and established models = 0.0728479 Jy
keep
! Adding 263 model components to the UV plane model.
! The established model now contains 323 components and 0.0728478 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J0706-2311_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.486 x 15.38 at -0.5534 degrees (North through East)
! Clean map  min=-0.014968  max=0.070681 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0706-2311_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0706811 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00172833 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.33577 7.33577 14.6715 29.3431 58.6862
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0051 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  40.895 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J0706-2311_S_uvs.log closed on Mon Feb 29 13:26:17 2016