! Started logfile: /scr/pima/rv100_uvs/J0648-3044_S_uvs.log on Mon Feb 29 13:26:04 2016
obs /scr/pima/rv100_uvs/J0648-3044_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J0648-3044_S_uva.fits
! AN table 1: 24 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.877778 visibilities/baseline/integration-bin.
! Found source: J0648-3044
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 1264 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0648-3044_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.072443Jy  sigma=11.999822
! Fit after  self-cal, rms=0.733197Jy  sigma=8.051166
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.198 mas, bmaj=12.25 mas, bpa=-1.881 degrees
! Estimated noise=2.98953 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.195525 Jy
! Component: 100  -  total flux cleaned = 0.264599 Jy
! Total flux subtracted in 100 components = 0.264599 Jy
! Clean residual min=-0.024869 max=0.036866 Jy/beam
! Clean residual mean=0.000083 rms=0.010642 Jy/beam
! Combined flux in latest and established models = 0.264599 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.264599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126301Jy  sigma=1.489930
! Fit after  self-cal, rms=0.126096Jy  sigma=1.488281
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.517 mas, bmaj=13.15 mas, bpa=-2.617 degrees
! Estimated noise=1.85241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0690043 Jy
! Component: 100  -  total flux cleaned = 0.10563 Jy
! Component: 150  -  total flux cleaned = 0.127823 Jy
! Component: 200  -  total flux cleaned = 0.143139 Jy
! Total flux subtracted in 200 components = 0.143139 Jy
! Clean residual min=-0.014215 max=0.019112 Jy/beam
! Clean residual mean=0.000112 rms=0.005986 Jy/beam
! Combined flux in latest and established models = 0.407738 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 55 components and 0.407738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087684Jy  sigma=0.951928
! Fit after  self-cal, rms=0.087284Jy  sigma=0.949257
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.517 x 13.15 at -2.617 degrees (North through East)
! Clean map  min=-0.013845  max=0.29104 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.11     KP        0.95     LA        0.95     NL        1.05     
!   OV        0.93     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.06     KP        0.94     LA        0.96     NL        1.16     
!   OV        0.95     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.11     KP        0.90     LA        0.92     NL        1.08     
!   OV        0.96     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.07     KP        0.92     LA        0.94     NL        1.12     
!   OV        0.96     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.087284Jy  sigma=0.949257
! Fit after  self-cal, rms=0.082625Jy  sigma=0.873718
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.507 mas, bmaj=13.41 mas, bpa=-2.173 degrees
! Estimated noise=1.80103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00487656 Jy
! Component: 100  -  total flux cleaned = -0.00546296 Jy
! Component: 150  -  total flux cleaned = -0.00537595 Jy
! Component: 200  -  total flux cleaned = -0.00543476 Jy
! Total flux subtracted in 200 components = -0.00543476 Jy
! Clean residual min=-0.005260 max=0.006914 Jy/beam
! Clean residual mean=-0.000001 rms=0.001732 Jy/beam
! Combined flux in latest and established models = 0.402303 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 0.402303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082139Jy  sigma=0.870095
! Fit after  self-cal, rms=0.082347Jy  sigma=0.869777
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082347Jy  sigma=0.869777
! Fit after  self-cal, rms=0.082564Jy  sigma=0.868530
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.5 mas, bmaj=13.44 mas, bpa=-1.977 degrees
! Estimated noise=1.79628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00267573 Jy
! Component: 100  -  total flux cleaned = -0.00294166 Jy
! Component: 150  -  total flux cleaned = -0.00301795 Jy
! Component: 200  -  total flux cleaned = -0.00310714 Jy
! Total flux subtracted in 200 components = -0.00310714 Jy
! Clean residual min=-0.004909 max=0.006453 Jy/beam
! Clean residual mean=-0.000004 rms=0.001567 Jy/beam
! Combined flux in latest and established models = 0.399196 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.399196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082443Jy  sigma=0.867807
! Fit after  self-cal, rms=0.082470Jy  sigma=0.867790
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.25849e-05 Jy
! Component: 100  -  total flux cleaned = -0.000146604 Jy
! Component: 150  -  total flux cleaned = -0.000146497 Jy
! Component: 200  -  total flux cleaned = -0.000146506 Jy
! Total flux subtracted in 200 components = -0.000146506 Jy
! Clean residual min=-0.004855 max=0.006408 Jy/beam
! Clean residual mean=-0.000004 rms=0.001559 Jy/beam
! Combined flux in latest and established models = 0.399049 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.399049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082451Jy  sigma=0.867672
! Fit after  self-cal, rms=0.082449Jy  sigma=0.867668
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082449Jy  sigma=0.867668
! Fit after  self-cal, rms=0.082654Jy  sigma=0.867293
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=13.45 mas, bpa=-1.872 degrees
! Estimated noise=1.79382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00154403 Jy
! Component: 100  -  total flux cleaned = -0.00188427 Jy
! Component: 150  -  total flux cleaned = -0.00192907 Jy
! Component: 200  -  total flux cleaned = -0.0019091 Jy
! Total flux subtracted in 200 components = -0.0019091 Jy
! Clean residual min=-0.004772 max=0.006126 Jy/beam
! Clean residual mean=-0.000005 rms=0.001503 Jy/beam
! Combined flux in latest and established models = 0.39714 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.39714 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082609Jy  sigma=0.867073
! Fit after  self-cal, rms=0.082627Jy  sigma=0.867065
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.51099e-05 Jy
! Component: 100  -  total flux cleaned = -1.47746e-05 Jy
! Component: 150  -  total flux cleaned = -1.49922e-05 Jy
! Component: 200  -  total flux cleaned = -1.54766e-05 Jy
! Total flux subtracted in 200 components = -1.54766e-05 Jy
! Clean residual min=-0.004772 max=0.006092 Jy/beam
! Clean residual mean=-0.000005 rms=0.001498 Jy/beam
! Combined flux in latest and established models = 0.397125 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 94 components and 0.397125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082615Jy  sigma=0.866997
! Fit after  self-cal, rms=0.082614Jy  sigma=0.866993
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082614Jy  sigma=0.866993
! Fit after  self-cal, rms=0.082727Jy  sigma=0.866864
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.557 mas, bmaj=16.53 mas, bpa=-8.454 degrees
! Estimated noise=2.17606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317613 Jy
! Component: 100  -  total flux cleaned = 0.000223025 Jy
! Component: 150  -  total flux cleaned = 0.000141851 Jy
! Component: 200  -  total flux cleaned = 3.50315e-05 Jy
! Total flux subtracted in 200 components = 3.50315e-05 Jy
! Clean residual min=-0.004006 max=0.005040 Jy/beam
! Clean residual mean=-0.000015 rms=0.001371 Jy/beam
! Combined flux in latest and established models = 0.39716 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 97 components and 0.39716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082729Jy  sigma=0.866987
! Fit after  self-cal, rms=0.082735Jy  sigma=0.866913
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137758 Jy
! Component: 100  -  total flux cleaned = 0.000104413 Jy
! Component: 150  -  total flux cleaned = 4.62695e-05 Jy
! Component: 200  -  total flux cleaned = -7.10672e-06 Jy
! Total flux subtracted in 200 components = -7.10672e-06 Jy
! Clean residual min=-0.003964 max=0.005003 Jy/beam
! Clean residual mean=-0.000015 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.397153 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 109 components and 0.397153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082745Jy  sigma=0.867066
! Fit after  self-cal, rms=0.082742Jy  sigma=0.867032
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.494 mas, bmaj=13.46 mas, bpa=-1.802 degrees
! Estimated noise=1.79193 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.494 x 13.46 at -1.802 degrees (North through East)
! Clean map  min=-0.0043407  max=0.28121 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.148 mas, bmaj=12.42 mas, bpa=-1.033 degrees
! Estimated noise=2.95456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193997 Jy
! Component: 100  -  total flux cleaned = 0.266099 Jy
! Component: 150  -  total flux cleaned = 0.309297 Jy
! Component: 200  -  total flux cleaned = 0.33646 Jy
! Total flux subtracted in 200 components = 0.33646 Jy
! Clean residual min=-0.013817 max=0.014915 Jy/beam
! Clean residual mean=0.000028 rms=0.004494 Jy/beam
! Combined flux in latest and established models = 0.33646 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.33646 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.494 mas, bmaj=13.46 mas, bpa=-1.802 degrees
! Estimated noise=1.79193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265029 Jy
! Component: 100  -  total flux cleaned = 0.0403173 Jy
! Component: 150  -  total flux cleaned = 0.0479988 Jy
! Component: 200  -  total flux cleaned = 0.0528416 Jy
! Total flux subtracted in 200 components = 0.0528416 Jy
! Clean residual min=-0.005414 max=0.007943 Jy/beam
! Clean residual mean=0.000013 rms=0.001775 Jy/beam
! Combined flux in latest and established models = 0.389302 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 30 components and 0.389302 Jy
! Inverting map 
! Added new window around map position (37.5, 18.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0043539 Jy
! Component: 100  -  total flux cleaned = 0.0048777 Jy
! Component: 150  -  total flux cleaned = 0.00537902 Jy
! Component: 200  -  total flux cleaned = 0.00538803 Jy
! Total flux subtracted in 200 components = 0.00538803 Jy
! Clean residual min=-0.004129 max=0.004513 Jy/beam
! Clean residual mean=0.000005 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 0.39469 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 53 components and 0.39469 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.557 mas, bmaj=16.53 mas, bpa=-8.454 degrees
! Estimated noise=2.17606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123974 Jy
! Component: 100  -  total flux cleaned = 0.00174993 Jy
! Component: 150  -  total flux cleaned = 0.00197085 Jy
! Component: 200  -  total flux cleaned = 0.00212523 Jy
! Total flux subtracted in 200 components = 0.00212523 Jy
! Clean residual min=-0.004140 max=0.003908 Jy/beam
! Clean residual mean=-0.000002 rms=0.001198 Jy/beam
! Combined flux in latest and established models = 0.396815 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169528 Jy
! Component: 100  -  total flux cleaned = 0.000261857 Jy
! Component: 150  -  total flux cleaned = 0.00034887 Jy
! Component: 200  -  total flux cleaned = 0.000460602 Jy
! Total flux subtracted in 200 components = 0.000460602 Jy
! Clean residual min=-0.004028 max=0.003765 Jy/beam
! Clean residual mean=-0.000003 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.397276 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 93 components and 0.397275 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.494 mas, bmaj=13.46 mas, bpa=-1.802 degrees
! Estimated noise=1.79193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000438194 Jy
! Component: 100  -  total flux cleaned = -0.000477148 Jy
! Component: 150  -  total flux cleaned = -0.000622585 Jy
! Component: 200  -  total flux cleaned = -0.000655686 Jy
! Total flux subtracted in 200 components = -0.000655686 Jy
! Clean residual min=-0.003997 max=0.004202 Jy/beam
! Clean residual mean=-0.000001 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 0.39662 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 119 components and 0.39662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082286Jy  sigma=0.862367
! Fit after  self-cal, rms=0.082222Jy  sigma=0.861937
wmodel /scr/pima/rv100_uvs/J0648-3044_S_map.mod
! Writing 119 model components to file: /scr/pima/rv100_uvs/J0648-3044_S_map.mod
wobs /scr/pima/rv100_uvs/J0648-3044_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J0648-3044_S_uvs.fits
wwins /scr/pima/rv100_uvs/J0648-3044_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv100_uvs/J0648-3044_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000321606 Jy
! Component: 100  -  total flux cleaned = 0.000271266 Jy
! Component: 150  -  total flux cleaned = 0.00069516 Jy
! Component: 200  -  total flux cleaned = 0.000865878 Jy
! Component: 250  -  total flux cleaned = 0.000971806 Jy
! Component: 300  -  total flux cleaned = 0.000971118 Jy
! Component: 350  -  total flux cleaned = 0.00102057 Jy
! Component: 400  -  total flux cleaned = 0.00116195 Jy
! Component: 450  -  total flux cleaned = 0.00125293 Jy
! Component: 500  -  total flux cleaned = 0.0012976 Jy
! Component: 550  -  total flux cleaned = 0.0013407 Jy
! Component: 600  -  total flux cleaned = 0.0013811 Jy
! Component: 650  -  total flux cleaned = 0.00138085 Jy
! Component: 700  -  total flux cleaned = 0.00134209 Jy
! Component: 750  -  total flux cleaned = 0.00130558 Jy
! Component: 800  -  total flux cleaned = 0.00137636 Jy
! Component: 850  -  total flux cleaned = 0.00130569 Jy
! Component: 900  -  total flux cleaned = 0.00133904 Jy
! Component: 950  -  total flux cleaned = 0.00143772 Jy
! Component: 1000  -  total flux cleaned = 0.00137278 Jy
! Component: 1050  -  total flux cleaned = 0.00140405 Jy
! Component: 1100  -  total flux cleaned = 0.00143488 Jy
! Component: 1150  -  total flux cleaned = 0.00155464 Jy
! Component: 1200  -  total flux cleaned = 0.00158368 Jy
! Component: 1250  -  total flux cleaned = 0.00152617 Jy
! Component: 1300  -  total flux cleaned = 0.00149752 Jy
! Component: 1350  -  total flux cleaned = 0.00138587 Jy
! Component: 1400  -  total flux cleaned = 0.00124878 Jy
! Component: 1450  -  total flux cleaned = 0.00124859 Jy
! Component: 1500  -  total flux cleaned = 0.00114133 Jy
! Component: 1550  -  total flux cleaned = 0.00111481 Jy
! Component: 1600  -  total flux cleaned = 0.00103652 Jy
! Component: 1650  -  total flux cleaned = 0.000985076 Jy
! Component: 1700  -  total flux cleaned = 0.000934235 Jy
! Component: 1750  -  total flux cleaned = 0.000858065 Jy
! Component: 1800  -  total flux cleaned = 0.000707261 Jy
! Component: 1850  -  total flux cleaned = 0.000607473 Jy
! Component: 1900  -  total flux cleaned = 0.000532987 Jy
! Component: 1950  -  total flux cleaned = 0.000385659 Jy
! Component: 2000  -  total flux cleaned = 0.000385706 Jy
! Component: 2050  -  total flux cleaned = 0.000288438 Jy
! Component: 2100  -  total flux cleaned = 0.000264047 Jy
! Component: 2150  -  total flux cleaned = 0.000215715 Jy
! Component: 2200  -  total flux cleaned = 0.00021547 Jy
! Component: 2250  -  total flux cleaned = 0.000167565 Jy
! Component: 2300  -  total flux cleaned = 0.000119961 Jy
! Component: 2350  -  total flux cleaned = 9.61949e-05 Jy
! Component: 2400  -  total flux cleaned = 0.000120033 Jy
! Component: 2450  -  total flux cleaned = 0.000214857 Jy
! Component: 2500  -  total flux cleaned = 0.000285899 Jy
! Component: 2550  -  total flux cleaned = 0.000356916 Jy
! Component: 2600  -  total flux cleaned = 0.000451498 Jy
! Component: 2650  -  total flux cleaned = 0.000475259 Jy
! Component: 2700  -  total flux cleaned = 0.0005464 Jy
! Component: 2750  -  total flux cleaned = 0.000546428 Jy
! Component: 2800  -  total flux cleaned = 0.000617604 Jy
! Component: 2850  -  total flux cleaned = 0.000689119 Jy
! Component: 2900  -  total flux cleaned = 0.000689187 Jy
! Component: 2950  -  total flux cleaned = 0.000760724 Jy
! Component: 3000  -  total flux cleaned = 0.000808521 Jy
! Component: 3050  -  total flux cleaned = 0.000808671 Jy
! Component: 3100  -  total flux cleaned = 0.000832539 Jy
! Component: 3150  -  total flux cleaned = 0.000904676 Jy
! Component: 3200  -  total flux cleaned = 0.000928863 Jy
! Component: 3250  -  total flux cleaned = 0.000904538 Jy
! Component: 3300  -  total flux cleaned = 0.000855862 Jy
! Component: 3350  -  total flux cleaned = 0.000880319 Jy
! Component: 3400  -  total flux cleaned = 0.000831229 Jy
! Component: 3450  -  total flux cleaned = 0.000806445 Jy
! Component: 3500  -  total flux cleaned = 0.000831095 Jy
! Component: 3550  -  total flux cleaned = 0.000806215 Jy
! Component: 3600  -  total flux cleaned = 0.000831367 Jy
! Component: 3650  -  total flux cleaned = 0.000831507 Jy
! Component: 3700  -  total flux cleaned = 0.000831589 Jy
! Component: 3750  -  total flux cleaned = 0.000831862 Jy
! Component: 3800  -  total flux cleaned = 0.000806032 Jy
! Component: 3850  -  total flux cleaned = 0.000806026 Jy
! Component: 3900  -  total flux cleaned = 0.000832415 Jy
! Component: 3950  -  total flux cleaned = 0.000832308 Jy
! Component: 4000  -  total flux cleaned = 0.000805499 Jy
! Component: 4050  -  total flux cleaned = 0.000859523 Jy
! Total flux subtracted in 4096 components = 0.00088671 Jy
! Clean residual min=-0.001484 max=0.001435 Jy/beam
! Clean residual mean=-0.000015 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.397507 Jy
keep
! Adding 228 model components to the UV plane model.
! The established model now contains 347 components and 0.397507 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J0648-3044_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.494 x 13.46 at -1.802 degrees (North through East)
! Clean map  min=-0.0042933  max=0.27832 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0648-3044_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.278315 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000523519 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.564309 0.564309 1.12862 2.25724 4.51447 9.02894 18.0579 36.1158 72.2315
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0015 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.278 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  531.623 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J0648-3044_S_uvs.log closed on Mon Feb 29 13:26:08 2016