! Started logfile: /scr/pima/rv100_uvs/J0625+4440_X_uvs.log on Mon Feb 29 13:25:50 2016 obs /scr/pima/rv100_uvs/J0625+4440_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J0625+4440_X_uva.fits ! AN table 1: 36 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0625+4440 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4032 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0625+4440_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.069697Jy sigma=16.603641 ! Fit after self-cal, rms=0.606671Jy sigma=9.330015 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7798 mas, bmaj=1.046 mas, bpa=-28.74 degrees ! Estimated noise=1.39347 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.306733 Jy ! Component: 100 - total flux cleaned = 0.373621 Jy ! Total flux subtracted in 100 components = 0.373621 Jy ! Clean residual min=-0.006800 max=0.018655 Jy/beam ! Clean residual mean=0.000012 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.373621 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.373621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068094Jy sigma=0.962338 ! Fit after self-cal, rms=0.068091Jy sigma=0.962307 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158929 Jy ! Component: 100 - total flux cleaned = 0.0226352 Jy ! Total flux subtracted in 100 components = 0.0226352 Jy ! Clean residual min=-0.005013 max=0.006258 Jy/beam ! Clean residual mean=0.000007 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.396256 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.396256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063695Jy sigma=0.881208 ! Fit after self-cal, rms=0.063694Jy sigma=0.881111 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.321 mas, bpa=-27.37 degrees ! Estimated noise=0.788642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669745 Jy ! Component: 100 - total flux cleaned = 0.010401 Jy ! Component: 150 - total flux cleaned = 0.0118217 Jy ! Component: 200 - total flux cleaned = 0.01228 Jy ! Total flux subtracted in 200 components = 0.01228 Jy ! Clean residual min=-0.004394 max=0.004824 Jy/beam ! Clean residual mean=0.000017 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.408536 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 25 components and 0.408536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062990Jy sigma=0.868139 ! Fit after self-cal, rms=0.062938Jy sigma=0.866642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.018 x 1.321 at -27.37 degrees (North through East) ! Clean map min=-0.0040256 max=0.39419 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.99 KP 0.99 LA 1.00 MK 1.01 ! NL 0.99 OV 1.01 PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 0.99 KP 1.02 LA 0.99 MK 1.00 ! NL 0.96 OV 1.02 PT 1.02 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 1.00 LA 1.00 MK 1.00 ! NL 1.00 OV 1.01 PT 1.00 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 0.99 KP 0.99 LA 1.03 MK 1.04 ! NL 0.98 OV 1.01 PT 1.01 SC 1.00 ! ! ! Fit before self-cal, rms=0.062938Jy sigma=0.866642 ! Fit after self-cal, rms=0.062104Jy sigma=0.854018 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.02 mas, bmaj=1.317 mas, bpa=-27.11 degrees ! Estimated noise=0.786157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133296 Jy ! Component: 100 - total flux cleaned = 0.00220169 Jy ! Component: 150 - total flux cleaned = 0.00264694 Jy ! Component: 200 - total flux cleaned = 0.00279116 Jy ! Total flux subtracted in 200 components = 0.00279116 Jy ! Clean residual min=-0.004048 max=0.003728 Jy/beam ! Clean residual mean=0.000017 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.411327 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 38 components and 0.411327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061961Jy sigma=0.851921 ! Fit after self-cal, rms=0.061963Jy sigma=0.851723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061963Jy sigma=0.851723 ! Fit after self-cal, rms=0.061797Jy sigma=0.840972 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.314 mas, bpa=-27.11 degrees ! Estimated noise=0.787633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133435 Jy ! Component: 100 - total flux cleaned = -0.00164974 Jy ! Component: 150 - total flux cleaned = -0.00197587 Jy ! Component: 200 - total flux cleaned = -0.00225601 Jy ! Total flux subtracted in 200 components = -0.00225601 Jy ! Clean residual min=-0.002336 max=0.002884 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.409071 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.409071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061728Jy sigma=0.840105 ! Fit after self-cal, rms=0.061729Jy sigma=0.840032 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208077 Jy ! Component: 100 - total flux cleaned = 0.00217366 Jy ! Component: 150 - total flux cleaned = 0.00232786 Jy ! Component: 200 - total flux cleaned = 0.00229419 Jy ! Total flux subtracted in 200 components = 0.00229419 Jy ! Clean residual min=-0.002333 max=0.002468 Jy/beam ! Clean residual mean=-0.000000 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.411365 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.411365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061613Jy sigma=0.838485 ! Fit after self-cal, rms=0.061607Jy sigma=0.838335 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061607Jy sigma=0.838335 ! Fit after self-cal, rms=0.061685Jy sigma=0.837759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.018 mas, bmaj=1.313 mas, bpa=-27.09 degrees ! Estimated noise=0.788523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554637 Jy ! Component: 100 - total flux cleaned = 0.000347907 Jy ! Component: 150 - total flux cleaned = 0.000190684 Jy ! Component: 200 - total flux cleaned = 7.50156e-05 Jy ! Total flux subtracted in 200 components = 7.50156e-05 Jy ! Clean residual min=-0.002327 max=0.002393 Jy/beam ! Clean residual mean=-0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.41144 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.41144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061641Jy sigma=0.837223 ! Fit after self-cal, rms=0.061641Jy sigma=0.837201 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50.8, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212277 Jy ! Component: 100 - total flux cleaned = 0.00287842 Jy ! Component: 150 - total flux cleaned = 0.00297548 Jy ! Component: 200 - total flux cleaned = 0.00297583 Jy ! Total flux subtracted in 200 components = 0.00297583 Jy ! Clean residual min=-0.002195 max=0.002155 Jy/beam ! Clean residual mean=0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.414416 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 0.414416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061558Jy sigma=0.836010 ! Fit after self-cal, rms=0.061554Jy sigma=0.835934 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061554Jy sigma=0.835934 ! Fit after self-cal, rms=0.061594Jy sigma=0.835510 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=2.554 mas, bpa=-13.82 degrees ! Estimated noise=0.993852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600397 Jy ! Component: 100 - total flux cleaned = 0.00093866 Jy ! Component: 150 - total flux cleaned = 0.00101258 Jy ! Component: 200 - total flux cleaned = 0.0010544 Jy ! Total flux subtracted in 200 components = 0.0010544 Jy ! Clean residual min=-0.001921 max=0.001880 Jy/beam ! Clean residual mean=0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.415471 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.415471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061574Jy sigma=0.835362 ! Fit after self-cal, rms=0.061568Jy sigma=0.835324 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120244 Jy ! Component: 100 - total flux cleaned = 0.000180782 Jy ! Component: 150 - total flux cleaned = 0.000269131 Jy ! Component: 200 - total flux cleaned = 0.000333492 Jy ! Total flux subtracted in 200 components = 0.000333492 Jy ! Clean residual min=-0.001909 max=0.001909 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.415804 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.415804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061562Jy sigma=0.835300 ! Fit after self-cal, rms=0.061560Jy sigma=0.835292 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.312 mas, bpa=-27.05 degrees ! Estimated noise=0.788863 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.017 x 1.312 at -27.05 degrees (North through East) ! Clean map min=-0.0021235 max=0.39426 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7788 mas, bmaj=1.041 mas, bpa=-28.73 degrees ! Estimated noise=1.39189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.306347 Jy ! Component: 100 - total flux cleaned = 0.373151 Jy ! Component: 150 - total flux cleaned = 0.389343 Jy ! Component: 200 - total flux cleaned = 0.396832 Jy ! Total flux subtracted in 200 components = 0.396832 Jy ! Clean residual min=-0.004997 max=0.005151 Jy/beam ! Clean residual mean=0.000003 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.396832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.396832 Jy ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.312 mas, bpa=-27.05 degrees ! Estimated noise=0.788863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627397 Jy ! Component: 100 - total flux cleaned = 0.00979833 Jy ! Component: 150 - total flux cleaned = 0.0115569 Jy ! Component: 200 - total flux cleaned = 0.0127278 Jy ! Total flux subtracted in 200 components = 0.0127278 Jy ! Clean residual min=-0.002434 max=0.002781 Jy/beam ! Clean residual mean=0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.409559 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 30 components and 0.409559 Jy ! Inverting map ! Added new window around map position (45, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690801 Jy ! Component: 100 - total flux cleaned = 0.00143726 Jy ! Component: 150 - total flux cleaned = 0.0018966 Jy ! Component: 200 - total flux cleaned = 0.00219703 Jy ! Total flux subtracted in 200 components = 0.00219703 Jy ! Clean residual min=-0.002278 max=0.002187 Jy/beam ! Clean residual mean=-0.000000 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.411756 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.411756 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=2.554 mas, bpa=-13.82 degrees ! Estimated noise=0.993852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156602 Jy ! Component: 100 - total flux cleaned = 0.0021035 Jy ! Component: 150 - total flux cleaned = 0.00239391 Jy ! Component: 200 - total flux cleaned = 0.00254843 Jy ! Total flux subtracted in 200 components = 0.00254843 Jy ! Clean residual min=-0.002213 max=0.001938 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.414305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137516 Jy ! Component: 100 - total flux cleaned = 0.000285721 Jy ! Component: 150 - total flux cleaned = 0.000399635 Jy ! Component: 200 - total flux cleaned = 0.000507251 Jy ! Total flux subtracted in 200 components = 0.000507251 Jy ! Clean residual min=-0.002126 max=0.001876 Jy/beam ! Clean residual mean=-0.000000 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.414812 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.414812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.017 mas, bmaj=1.312 mas, bpa=-27.05 degrees ! Estimated noise=0.788863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56996e-05 Jy ! Component: 100 - total flux cleaned = 0.000258585 Jy ! Component: 150 - total flux cleaned = 0.000384246 Jy ! Component: 200 - total flux cleaned = 0.000461409 Jy ! Total flux subtracted in 200 components = 0.000461409 Jy ! Clean residual min=-0.002278 max=0.002141 Jy/beam ! Clean residual mean=-0.000000 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.415274 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.415274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061477Jy sigma=0.834644 ! Fit after self-cal, rms=0.061462Jy sigma=0.834461 wmodel /scr/pima/rv100_uvs/J0625+4440_X_map.mod ! Writing 83 model components to file: /scr/pima/rv100_uvs/J0625+4440_X_map.mod wobs /scr/pima/rv100_uvs/J0625+4440_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J0625+4440_X_uvs.fits wwins /scr/pima/rv100_uvs/J0625+4440_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rv100_uvs/J0625+4440_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000593593 Jy ! Component: 100 - total flux cleaned = -0.000746383 Jy ! Component: 150 - total flux cleaned = -0.00089393 Jy ! Component: 200 - total flux cleaned = -0.00103792 Jy ! Component: 250 - total flux cleaned = -0.0013533 Jy ! Component: 300 - total flux cleaned = -0.00166255 Jy ! Component: 350 - total flux cleaned = -0.0020326 Jy ! Component: 400 - total flux cleaned = -0.00242778 Jy ! Component: 450 - total flux cleaned = -0.00278271 Jy ! Component: 500 - total flux cleaned = -0.00300516 Jy ! Component: 550 - total flux cleaned = -0.00334894 Jy ! Component: 600 - total flux cleaned = -0.00365621 Jy ! Component: 650 - total flux cleaned = -0.00392815 Jy ! Component: 700 - total flux cleaned = -0.00413666 Jy ! Component: 750 - total flux cleaned = -0.00431328 Jy ! Component: 800 - total flux cleaned = -0.00451687 Jy ! Component: 850 - total flux cleaned = -0.00474622 Jy ! Component: 900 - total flux cleaned = -0.00488786 Jy ! Component: 950 - total flux cleaned = -0.00502801 Jy ! Component: 1000 - total flux cleaned = -0.00524924 Jy ! Component: 1050 - total flux cleaned = -0.00541312 Jy ! Component: 1100 - total flux cleaned = -0.00562905 Jy ! Component: 1150 - total flux cleaned = -0.00581585 Jy ! Component: 1200 - total flux cleaned = -0.00597411 Jy ! Component: 1250 - total flux cleaned = -0.00620954 Jy ! Component: 1300 - total flux cleaned = -0.00639086 Jy ! Component: 1350 - total flux cleaned = -0.00657016 Jy ! Component: 1400 - total flux cleaned = -0.00669712 Jy ! Component: 1450 - total flux cleaned = -0.00687357 Jy ! Component: 1500 - total flux cleaned = -0.00704843 Jy ! Component: 1550 - total flux cleaned = -0.00719695 Jy ! Component: 1600 - total flux cleaned = -0.00731967 Jy ! Component: 1650 - total flux cleaned = -0.00741697 Jy ! Component: 1700 - total flux cleaned = -0.00758622 Jy ! Component: 1750 - total flux cleaned = -0.00758619 Jy ! Component: 1800 - total flux cleaned = -0.00768109 Jy ! Component: 1850 - total flux cleaned = -0.00772848 Jy ! Component: 1900 - total flux cleaned = -0.00789275 Jy ! Component: 1950 - total flux cleaned = -0.00791585 Jy ! Component: 2000 - total flux cleaned = -0.00805462 Jy ! Component: 2050 - total flux cleaned = -0.00807744 Jy ! Component: 2100 - total flux cleaned = -0.00821407 Jy ! Component: 2150 - total flux cleaned = -0.00825937 Jy ! Component: 2200 - total flux cleaned = -0.00830429 Jy ! Component: 2250 - total flux cleaned = -0.00839377 Jy ! Component: 2300 - total flux cleaned = -0.00848258 Jy ! Component: 2350 - total flux cleaned = -0.00859255 Jy ! Component: 2400 - total flux cleaned = -0.00863647 Jy ! Component: 2450 - total flux cleaned = -0.00865835 Jy ! Component: 2500 - total flux cleaned = -0.00878803 Jy ! Component: 2550 - total flux cleaned = -0.00880948 Jy ! Component: 2600 - total flux cleaned = -0.00883096 Jy ! Component: 2650 - total flux cleaned = -0.00893709 Jy ! Component: 2700 - total flux cleaned = -0.00893712 Jy ! Component: 2750 - total flux cleaned = -0.00904207 Jy ! Component: 2800 - total flux cleaned = -0.00908383 Jy ! Component: 2850 - total flux cleaned = -0.00910443 Jy ! Component: 2900 - total flux cleaned = -0.0091458 Jy ! Component: 2950 - total flux cleaned = -0.00924828 Jy ! Component: 3000 - total flux cleaned = -0.00937074 Jy ! Component: 3050 - total flux cleaned = -0.00945201 Jy ! Component: 3100 - total flux cleaned = -0.00955291 Jy ! Component: 3150 - total flux cleaned = -0.0095931 Jy ! Component: 3200 - total flux cleaned = -0.00961312 Jy ! Component: 3250 - total flux cleaned = -0.00981234 Jy ! Component: 3300 - total flux cleaned = -0.00989153 Jy ! Component: 3350 - total flux cleaned = -0.00997032 Jy ! Component: 3400 - total flux cleaned = -0.0099703 Jy ! Component: 3450 - total flux cleaned = -0.0101658 Jy ! Component: 3500 - total flux cleaned = -0.0101657 Jy ! Component: 3550 - total flux cleaned = -0.0102625 Jy ! Component: 3600 - total flux cleaned = -0.0103781 Jy ! Component: 3650 - total flux cleaned = -0.0104549 Jy ! Component: 3700 - total flux cleaned = -0.0105693 Jy ! Component: 3750 - total flux cleaned = -0.0106642 Jy ! Component: 3800 - total flux cleaned = -0.0107398 Jy ! Component: 3850 - total flux cleaned = -0.0108338 Jy ! Component: 3900 - total flux cleaned = -0.0108527 Jy ! Component: 3950 - total flux cleaned = -0.0110392 Jy ! Component: 4000 - total flux cleaned = -0.0111507 Jy ! Component: 4050 - total flux cleaned = -0.0112433 Jy ! Total flux subtracted in 4096 components = -0.0112802 Jy ! Clean residual min=-0.001280 max=0.001225 Jy/beam ! Clean residual mean=0.000002 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.403993 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 365 components and 0.403993 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J0625+4440_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.017 x 1.312 at -27.05 degrees (North through East) ! Clean map min=-0.0021031 max=0.39451 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0625+4440_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.394506 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000299239 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.227555 0.227555 0.455109 0.910218 1.82044 3.64087 7.28175 14.5635 29.127 58.254 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.394 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1318.36 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J0625+4440_X_uvs.log closed on Mon Feb 29 13:25:54 2016