! Started logfile: /scr/pima/rv100_uvs/J0438-1251_S_uvs.log on Mon Feb 29 13:25:37 2016
obs /scr/pima/rv100_uvs/J0438-1251_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J0438-1251_S_uva.fits
! AN table 1: 50 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.637143 visibilities/baseline/integration-bin.
! Found source: J0438-1251
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3568 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0438-1251_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 103 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024865Jy  sigma=15.729672
! Fit after  self-cal, rms=0.760221Jy  sigma=11.609758
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.099 mas, bmaj=8.869 mas, bpa=-5.701 degrees
! Estimated noise=1.21657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182031 Jy
! Component: 100  -  total flux cleaned = 0.22563 Jy
! Total flux subtracted in 100 components = 0.22563 Jy
! Clean residual min=-0.008424 max=0.017208 Jy/beam
! Clean residual mean=0.000006 rms=0.002466 Jy/beam
! Combined flux in latest and established models = 0.22563 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.22563 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065954Jy  sigma=1.005512
! Fit after  self-cal, rms=0.065949Jy  sigma=1.005373
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177689 Jy
! Component: 100  -  total flux cleaned = 0.0264124 Jy
! Total flux subtracted in 100 components = 0.0264124 Jy
! Clean residual min=-0.006447 max=0.011122 Jy/beam
! Clean residual mean=0.000004 rms=0.001649 Jy/beam
! Combined flux in latest and established models = 0.252042 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.252042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059741Jy  sigma=0.897623
! Fit after  self-cal, rms=0.059725Jy  sigma=0.897141
! Inverting map 
! Added new window around map position (-5, -9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0094221 Jy
! Component: 100  -  total flux cleaned = 0.0145835 Jy
! Total flux subtracted in 100 components = 0.0145835 Jy
! Clean residual min=-0.005518 max=0.004882 Jy/beam
! Clean residual mean=0.000002 rms=0.001299 Jy/beam
! Combined flux in latest and established models = 0.266626 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.266626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057726Jy  sigma=0.861483
! Fit after  self-cal, rms=0.057595Jy  sigma=0.859518
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.728 mas, bmaj=10.51 mas, bpa=-5.724 degrees
! Estimated noise=0.823095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00702086 Jy
! Component: 100  -  total flux cleaned = 0.0113737 Jy
! Component: 150  -  total flux cleaned = 0.0141694 Jy
! Component: 200  -  total flux cleaned = 0.0160023 Jy
! Total flux subtracted in 200 components = 0.0160023 Jy
! Clean residual min=-0.003585 max=0.003568 Jy/beam
! Clean residual mean=-0.000004 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.282628 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 74 components and 0.282628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056757Jy  sigma=0.843159
! Fit after  self-cal, rms=0.056683Jy  sigma=0.841983
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.728 x 10.51 at -5.724 degrees (North through East)
! Clean map  min=-0.0033658  max=0.23995 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.98     KP        0.97     LA        1.00     MK        0.98     
!   NL        0.99     OV        0.98     PT        1.01     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.98     KP        0.96     LA        1.02     MK        1.09     
!   NL        1.03     OV        1.00     PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.04     KP        1.00     LA        1.01     MK        0.97     
!   NL        1.01     OV        0.98     PT        0.99     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        1.04     KP        1.00     LA        0.99     MK        0.97     
!   NL        1.01     OV        0.99     PT        1.04     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.056683Jy  sigma=0.841983
! Fit after  self-cal, rms=0.056376Jy  sigma=0.836336
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=10.5 mas, bpa=-5.573 degrees
! Estimated noise=0.824465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000881027 Jy
! Component: 100  -  total flux cleaned = 0.00112458 Jy
! Component: 150  -  total flux cleaned = 0.00122167 Jy
! Component: 200  -  total flux cleaned = 0.0012715 Jy
! Total flux subtracted in 200 components = 0.0012715 Jy
! Clean residual min=-0.003059 max=0.002812 Jy/beam
! Clean residual mean=-0.000002 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.2839 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.2839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056351Jy  sigma=0.835888
! Fit after  self-cal, rms=0.056354Jy  sigma=0.835802
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056354Jy  sigma=0.835802
! Fit after  self-cal, rms=0.056163Jy  sigma=0.832484
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=10.5 mas, bpa=-5.558 degrees
! Estimated noise=0.823834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000546486 Jy
! Component: 100  -  total flux cleaned = 0.000583585 Jy
! Component: 150  -  total flux cleaned = 0.000623132 Jy
! Component: 200  -  total flux cleaned = 0.000635279 Jy
! Total flux subtracted in 200 components = 0.000635279 Jy
! Clean residual min=-0.002892 max=0.002685 Jy/beam
! Clean residual mean=-0.000003 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.284535 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 95 components and 0.284535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056157Jy  sigma=0.832260
! Fit after  self-cal, rms=0.056155Jy  sigma=0.832229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.34381e-05 Jy
! Component: 100  -  total flux cleaned = 3.7114e-05 Jy
! Component: 150  -  total flux cleaned = 3.70542e-05 Jy
! Component: 200  -  total flux cleaned = 3.73887e-05 Jy
! Total flux subtracted in 200 components = 3.73887e-05 Jy
! Clean residual min=-0.002864 max=0.002640 Jy/beam
! Clean residual mean=-0.000003 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 0.284572 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 97 components and 0.284572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056151Jy  sigma=0.832153
! Fit after  self-cal, rms=0.056150Jy  sigma=0.832145
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056150Jy  sigma=0.832145
! Fit after  self-cal, rms=0.055931Jy  sigma=0.829531
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=10.5 mas, bpa=-5.581 degrees
! Estimated noise=0.823633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334082 Jy
! Component: 100  -  total flux cleaned = 0.000450974 Jy
! Component: 150  -  total flux cleaned = 0.000478817 Jy
! Component: 200  -  total flux cleaned = 0.000513467 Jy
! Total flux subtracted in 200 components = 0.000513467 Jy
! Clean residual min=-0.002638 max=0.002629 Jy/beam
! Clean residual mean=-0.000002 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.285086 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.285086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055928Jy  sigma=0.829431
! Fit after  self-cal, rms=0.055931Jy  sigma=0.829412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.416e-05 Jy
! Component: 100  -  total flux cleaned = 3.35729e-05 Jy
! Component: 150  -  total flux cleaned = 5.84301e-05 Jy
! Component: 200  -  total flux cleaned = 6.63727e-05 Jy
! Total flux subtracted in 200 components = 6.63727e-05 Jy
! Clean residual min=-0.002647 max=0.002614 Jy/beam
! Clean residual mean=-0.000002 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.285152 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.285152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055929Jy  sigma=0.829373
! Fit after  self-cal, rms=0.055928Jy  sigma=0.829369
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055928Jy  sigma=0.829369
! Fit after  self-cal, rms=0.055915Jy  sigma=0.829337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.275 mas, bmaj=17.17 mas, bpa=-9.653 degrees
! Estimated noise=0.989274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000451647 Jy
! Component: 100  -  total flux cleaned = 0.000493707 Jy
! Component: 150  -  total flux cleaned = 0.00049994 Jy
! Component: 200  -  total flux cleaned = 0.000505716 Jy
! Total flux subtracted in 200 components = 0.000505716 Jy
! Clean residual min=-0.001974 max=0.002643 Jy/beam
! Clean residual mean=-0.000004 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.285658 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 117 components and 0.285658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055915Jy  sigma=0.829313
! Fit after  self-cal, rms=0.055914Jy  sigma=0.829305
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.72685e-05 Jy
! Component: 100  -  total flux cleaned = 8.98722e-05 Jy
! Component: 150  -  total flux cleaned = 8.99726e-05 Jy
! Component: 200  -  total flux cleaned = 8.99853e-05 Jy
! Total flux subtracted in 200 components = 8.99853e-05 Jy
! Clean residual min=-0.002024 max=0.002625 Jy/beam
! Clean residual mean=-0.000004 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.285748 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 122 components and 0.285748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055915Jy  sigma=0.829308
! Fit after  self-cal, rms=0.055914Jy  sigma=0.829307
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=10.5 mas, bpa=-5.601 degrees
! Estimated noise=0.823502 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.731 x 10.5 at -5.601 degrees (North through East)
! Clean map  min=-0.0024994  max=0.23927 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=8.858 mas, bpa=-5.553 degrees
! Estimated noise=1.16231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181212 Jy
! Component: 100  -  total flux cleaned = 0.224812 Jy
! Component: 150  -  total flux cleaned = 0.243131 Jy
! Component: 200  -  total flux cleaned = 0.253863 Jy
! Total flux subtracted in 200 components = 0.253863 Jy
! Clean residual min=-0.004954 max=0.006149 Jy/beam
! Clean residual mean=0.000004 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 0.253863 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.253863 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=10.5 mas, bpa=-5.601 degrees
! Estimated noise=0.823502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117351 Jy
! Component: 100  -  total flux cleaned = 0.018828 Jy
! Component: 150  -  total flux cleaned = 0.0233756 Jy
! Component: 200  -  total flux cleaned = 0.0263771 Jy
! Total flux subtracted in 200 components = 0.0263771 Jy
! Clean residual min=-0.002742 max=0.003149 Jy/beam
! Clean residual mean=-0.000001 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.280241 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 73 components and 0.28024 Jy
! Inverting map 
! Added new window around map position (-89, 103.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0027882 Jy
! Component: 100  -  total flux cleaned = 0.00386486 Jy
! Component: 150  -  total flux cleaned = 0.00443733 Jy
! Component: 200  -  total flux cleaned = 0.00482234 Jy
! Total flux subtracted in 200 components = 0.00482234 Jy
! Clean residual min=-0.002588 max=0.002482 Jy/beam
! Clean residual mean=-0.000003 rms=0.000593 Jy/beam
! Combined flux in latest and established models = 0.285063 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 93 components and 0.285063 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.275 mas, bmaj=17.17 mas, bpa=-9.653 degrees
! Estimated noise=0.989274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125905 Jy
! Component: 100  -  total flux cleaned = 0.00165449 Jy
! Component: 150  -  total flux cleaned = 0.00193247 Jy
! Component: 200  -  total flux cleaned = 0.0021107 Jy
! Total flux subtracted in 200 components = 0.0021107 Jy
! Clean residual min=-0.002071 max=0.002388 Jy/beam
! Clean residual mean=-0.000008 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.287173 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.56862e-05 Jy
! Component: 100  -  total flux cleaned = 7.13625e-05 Jy
! Component: 150  -  total flux cleaned = 8.54158e-05 Jy
! Component: 200  -  total flux cleaned = 9.83182e-05 Jy
! Total flux subtracted in 200 components = 9.83182e-05 Jy
! Clean residual min=-0.002056 max=0.002352 Jy/beam
! Clean residual mean=-0.000008 rms=0.000660 Jy/beam
! Combined flux in latest and established models = 0.287272 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 116 components and 0.287272 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.731 mas, bmaj=10.5 mas, bpa=-5.601 degrees
! Estimated noise=0.823502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000406407 Jy
! Component: 100  -  total flux cleaned = -0.000375089 Jy
! Component: 150  -  total flux cleaned = -0.000319489 Jy
! Component: 200  -  total flux cleaned = -0.000320586 Jy
! Total flux subtracted in 200 components = -0.000320586 Jy
! Clean residual min=-0.002526 max=0.002486 Jy/beam
! Clean residual mean=-0.000004 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.286951 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 131 components and 0.286951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055794Jy  sigma=0.827753
! Fit after  self-cal, rms=0.055784Jy  sigma=0.827571
wmodel /scr/pima/rv100_uvs/J0438-1251_S_map.mod
! Writing 131 model components to file: /scr/pima/rv100_uvs/J0438-1251_S_map.mod
wobs /scr/pima/rv100_uvs/J0438-1251_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J0438-1251_S_uvs.fits
wwins /scr/pima/rv100_uvs/J0438-1251_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J0438-1251_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000263408 Jy
! Component: 100  -  total flux cleaned = 0.000299694 Jy
! Component: 150  -  total flux cleaned = 0.000264631 Jy
! Component: 200  -  total flux cleaned = 0.00029681 Jy
! Component: 250  -  total flux cleaned = 0.000389145 Jy
! Component: 300  -  total flux cleaned = 0.000449454 Jy
! Component: 350  -  total flux cleaned = 0.00050694 Jy
! Component: 400  -  total flux cleaned = 0.000562395 Jy
! Component: 450  -  total flux cleaned = 0.000589489 Jy
! Component: 500  -  total flux cleaned = 0.000668007 Jy
! Component: 550  -  total flux cleaned = 0.000642577 Jy
! Component: 600  -  total flux cleaned = 0.000617459 Jy
! Component: 650  -  total flux cleaned = 0.000496619 Jy
! Component: 700  -  total flux cleaned = 0.000401631 Jy
! Component: 750  -  total flux cleaned = 0.000355028 Jy
! Component: 800  -  total flux cleaned = 0.000309842 Jy
! Component: 850  -  total flux cleaned = 0.000243884 Jy
! Component: 900  -  total flux cleaned = 0.000112777 Jy
! Component: 950  -  total flux cleaned = -3.73784e-05 Jy
! Component: 1000  -  total flux cleaned = -0.000248089 Jy
! Component: 1050  -  total flux cleaned = -0.000310198 Jy
! Component: 1100  -  total flux cleaned = -0.00041256 Jy
! Component: 1150  -  total flux cleaned = -0.00049309 Jy
! Component: 1200  -  total flux cleaned = -0.000532822 Jy
! Component: 1250  -  total flux cleaned = -0.000572356 Jy
! Component: 1300  -  total flux cleaned = -0.000591837 Jy
! Component: 1350  -  total flux cleaned = -0.000572792 Jy
! Component: 1400  -  total flux cleaned = -0.000647737 Jy
! Component: 1450  -  total flux cleaned = -0.00061062 Jy
! Component: 1500  -  total flux cleaned = -0.000592364 Jy
! Component: 1550  -  total flux cleaned = -0.000646014 Jy
! Component: 1600  -  total flux cleaned = -0.000610583 Jy
! Component: 1650  -  total flux cleaned = -0.000593224 Jy
! Component: 1700  -  total flux cleaned = -0.000644941 Jy
! Component: 1750  -  total flux cleaned = -0.000645184 Jy
! Component: 1800  -  total flux cleaned = -0.000645271 Jy
! Component: 1850  -  total flux cleaned = -0.000645314 Jy
! Component: 1900  -  total flux cleaned = -0.000760559 Jy
! Component: 1950  -  total flux cleaned = -0.000760248 Jy
! Component: 2000  -  total flux cleaned = -0.00074409 Jy
! Component: 2050  -  total flux cleaned = -0.00080805 Jy
! Component: 2100  -  total flux cleaned = -0.000839533 Jy
! Component: 2150  -  total flux cleaned = -0.000839331 Jy
! Component: 2200  -  total flux cleaned = -0.000901048 Jy
! Component: 2250  -  total flux cleaned = -0.000900897 Jy
! Component: 2300  -  total flux cleaned = -0.000901189 Jy
! Component: 2350  -  total flux cleaned = -0.000961103 Jy
! Component: 2400  -  total flux cleaned = -0.00100559 Jy
! Component: 2450  -  total flux cleaned = -0.00102043 Jy
! Component: 2500  -  total flux cleaned = -0.0010351 Jy
! Component: 2550  -  total flux cleaned = -0.00106389 Jy
! Component: 2600  -  total flux cleaned = -0.00110672 Jy
! Component: 2650  -  total flux cleaned = -0.00114921 Jy
! Component: 2700  -  total flux cleaned = -0.00117719 Jy
! Component: 2750  -  total flux cleaned = -0.00126084 Jy
! Component: 2800  -  total flux cleaned = -0.00130257 Jy
! Component: 2850  -  total flux cleaned = -0.00135729 Jy
! Component: 2900  -  total flux cleaned = -0.00141167 Jy
! Component: 2950  -  total flux cleaned = -0.00150597 Jy
! Component: 3000  -  total flux cleaned = -0.00159955 Jy
! Component: 3050  -  total flux cleaned = -0.00163917 Jy
! Component: 3100  -  total flux cleaned = -0.00165225 Jy
! Component: 3150  -  total flux cleaned = -0.0017568 Jy
! Component: 3200  -  total flux cleaned = -0.00184751 Jy
! Component: 3250  -  total flux cleaned = -0.00188606 Jy
! Component: 3300  -  total flux cleaned = -0.00191171 Jy
! Component: 3350  -  total flux cleaned = -0.00198784 Jy
! Component: 3400  -  total flux cleaned = -0.00203821 Jy
! Component: 3450  -  total flux cleaned = -0.00207579 Jy
! Component: 3500  -  total flux cleaned = -0.00212565 Jy
! Component: 3550  -  total flux cleaned = -0.00223671 Jy
! Component: 3600  -  total flux cleaned = -0.00218777 Jy
! Component: 3650  -  total flux cleaned = -0.00230974 Jy
! Component: 3700  -  total flux cleaned = -0.00233396 Jy
! Component: 3750  -  total flux cleaned = -0.00238201 Jy
! Component: 3800  -  total flux cleaned = -0.00244188 Jy
! Component: 3850  -  total flux cleaned = -0.00246567 Jy
! Component: 3900  -  total flux cleaned = -0.0024776 Jy
! Component: 3950  -  total flux cleaned = -0.00250113 Jy
! Component: 4000  -  total flux cleaned = -0.00255969 Jy
! Component: 4050  -  total flux cleaned = -0.002583 Jy
! Total flux subtracted in 4096 components = -0.00260619 Jy
! Clean residual min=-0.000698 max=0.000637 Jy/beam
! Clean residual mean=-0.000003 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.284345 Jy
keep
! Adding 262 model components to the UV plane model.
! The established model now contains 393 components and 0.284345 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J0438-1251_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.731 x 10.5 at -5.601 degrees (North through East)
! Clean map  min=-0.0016853  max=0.23834 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0438-1251_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.238337 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212577 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.267576 0.267576 0.535151 1.0703 2.14061 4.28121 8.56242 17.1248 34.2497 68.4994
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.238 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1121.18 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J0438-1251_S_uvs.log closed on Mon Feb 29 13:25:41 2016