! Started logfile: /scr/pima/rv100_uvs/J0328+3940_X_uvs.log on Mon Feb 29 13:25:10 2016 obs /scr/pima/rv100_uvs/J0328+3940_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J0328+3940_X_uva.fits ! AN table 1: 44 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0328+3940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4928 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0328+3940_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.045488Jy sigma=17.031636 ! Fit after self-cal, rms=0.696237Jy sigma=11.257018 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7316 mas, bmaj=1.091 mas, bpa=-12.03 degrees ! Estimated noise=1.1441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233214 Jy ! Component: 100 - total flux cleaned = 0.284802 Jy ! Total flux subtracted in 100 components = 0.284802 Jy ! Clean residual min=-0.007229 max=0.016763 Jy/beam ! Clean residual mean=0.000006 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.284802 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.284802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061906Jy sigma=0.948027 ! Fit after self-cal, rms=0.061905Jy sigma=0.947919 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163591 Jy ! Component: 100 - total flux cleaned = 0.024065 Jy ! Total flux subtracted in 100 components = 0.024065 Jy ! Clean residual min=-0.005648 max=0.007116 Jy/beam ! Clean residual mean=0.000002 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 0.308867 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.308867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056407Jy sigma=0.854409 ! Fit after self-cal, rms=0.056409Jy sigma=0.854241 ! Inverting map ! Added new window around map position (0.6, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646858 Jy ! Component: 100 - total flux cleaned = 0.0100115 Jy ! Total flux subtracted in 100 components = 0.0100115 Jy ! Clean residual min=-0.005291 max=0.004606 Jy/beam ! Clean residual mean=0.000001 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.318879 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.318879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055641Jy sigma=0.842859 ! Fit after self-cal, rms=0.055592Jy sigma=0.841924 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9648 mas, bmaj=1.401 mas, bpa=-12.05 degrees ! Estimated noise=0.67006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270743 Jy ! Component: 100 - total flux cleaned = 0.00392172 Jy ! Component: 150 - total flux cleaned = 0.00409461 Jy ! Component: 200 - total flux cleaned = 0.00417102 Jy ! Total flux subtracted in 200 components = 0.00417102 Jy ! Clean residual min=-0.003163 max=0.003098 Jy/beam ! Clean residual mean=0.000005 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.32305 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.32305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055422Jy sigma=0.839950 ! Fit after self-cal, rms=0.055423Jy sigma=0.839917 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9648 x 1.401 at -12.05 degrees (North through East) ! Clean map min=-0.0030361 max=0.30361 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 0.99 LA 1.03 MK 1.02 ! NL 0.99 OV 1.01 PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.99 LA 1.02 MK 0.99 ! NL 1.00 OV 1.02 PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 0.97 LA 1.01 MK 1.01 ! NL 1.01 OV 1.01 PT 0.99 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 0.96 LA 1.01 MK 1.03 ! NL 0.99 OV 1.03 PT 0.96 SC 0.99 ! ! ! Fit before self-cal, rms=0.055423Jy sigma=0.839917 ! Fit after self-cal, rms=0.054518Jy sigma=0.829744 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9671 mas, bmaj=1.399 mas, bpa=-11.63 degrees ! Estimated noise=0.669165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000858674 Jy ! Component: 100 - total flux cleaned = -0.00117447 Jy ! Component: 150 - total flux cleaned = -0.00131893 Jy ! Component: 200 - total flux cleaned = -0.0013675 Jy ! Total flux subtracted in 200 components = -0.0013675 Jy ! Clean residual min=-0.002466 max=0.002498 Jy/beam ! Clean residual mean=0.000005 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.321682 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.321682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054466Jy sigma=0.828934 ! Fit after self-cal, rms=0.054462Jy sigma=0.828873 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054462Jy sigma=0.828873 ! Fit after self-cal, rms=0.054447Jy sigma=0.826989 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9665 mas, bmaj=1.399 mas, bpa=-11.92 degrees ! Estimated noise=0.669431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143802 Jy ! Component: 100 - total flux cleaned = -6.28979e-05 Jy ! Component: 150 - total flux cleaned = -2.76735e-05 Jy ! Component: 200 - total flux cleaned = -1.13815e-05 Jy ! Total flux subtracted in 200 components = -1.13815e-05 Jy ! Clean residual min=-0.002316 max=0.002340 Jy/beam ! Clean residual mean=0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.321671 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.321671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054433Jy sigma=0.826776 ! Fit after self-cal, rms=0.054434Jy sigma=0.826769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45932e-05 Jy ! Component: 100 - total flux cleaned = 1.45106e-05 Jy ! Component: 150 - total flux cleaned = 2.62142e-05 Jy ! Component: 200 - total flux cleaned = 3.62919e-05 Jy ! Total flux subtracted in 200 components = 3.62919e-05 Jy ! Clean residual min=-0.002320 max=0.002336 Jy/beam ! Clean residual mean=0.000005 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.321707 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.321707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054430Jy sigma=0.826690 ! Fit after self-cal, rms=0.054429Jy sigma=0.826686 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054429Jy sigma=0.826686 ! Fit after self-cal, rms=0.054461Jy sigma=0.826652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9666 mas, bmaj=1.398 mas, bpa=-11.94 degrees ! Estimated noise=0.66979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.02049e-05 Jy ! Component: 100 - total flux cleaned = 0.000116546 Jy ! Component: 150 - total flux cleaned = 0.000116766 Jy ! Component: 200 - total flux cleaned = 0.000116636 Jy ! Total flux subtracted in 200 components = 0.000116636 Jy ! Clean residual min=-0.002325 max=0.002323 Jy/beam ! Clean residual mean=0.000005 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.321824 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.321824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054456Jy sigma=0.826571 ! Fit after self-cal, rms=0.054456Jy sigma=0.826569 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.08216e-06 Jy ! Component: 100 - total flux cleaned = 8.4579e-06 Jy ! Component: 150 - total flux cleaned = -1.7247e-07 Jy ! Component: 200 - total flux cleaned = -2.75205e-07 Jy ! Total flux subtracted in 200 components = -2.75205e-07 Jy ! Clean residual min=-0.002322 max=0.002316 Jy/beam ! Clean residual mean=0.000005 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.321823 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.321823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054453Jy sigma=0.826529 ! Fit after self-cal, rms=0.054453Jy sigma=0.826527 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054453Jy sigma=0.826527 ! Fit after self-cal, rms=0.054471Jy sigma=0.826509 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=2.698 mas, bpa=-5.027 degrees ! Estimated noise=0.867287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519643 Jy ! Component: 100 - total flux cleaned = 0.000555121 Jy ! Component: 150 - total flux cleaned = 0.000554738 Jy ! Component: 200 - total flux cleaned = 0.000553621 Jy ! Total flux subtracted in 200 components = 0.000553621 Jy ! Clean residual min=-0.002948 max=0.003092 Jy/beam ! Clean residual mean=0.000011 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.322377 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.322377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054474Jy sigma=0.826556 ! Fit after self-cal, rms=0.054473Jy sigma=0.826521 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.88667e-05 Jy ! Component: 100 - total flux cleaned = 3.73948e-05 Jy ! Component: 150 - total flux cleaned = 3.69522e-05 Jy ! Component: 200 - total flux cleaned = 3.6916e-05 Jy ! Total flux subtracted in 200 components = 3.6916e-05 Jy ! Clean residual min=-0.002959 max=0.003076 Jy/beam ! Clean residual mean=0.000011 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.322414 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.322414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054477Jy sigma=0.826580 ! Fit after self-cal, rms=0.054476Jy sigma=0.826563 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9665 mas, bmaj=1.398 mas, bpa=-11.96 degrees ! Estimated noise=0.670023 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9665 x 1.398 at -11.96 degrees (North through East) ! Clean map min=-0.0021225 max=0.30348 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7323 mas, bmaj=1.09 mas, bpa=-12.03 degrees ! Estimated noise=1.14579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233517 Jy ! Component: 100 - total flux cleaned = 0.285314 Jy ! Component: 150 - total flux cleaned = 0.302317 Jy ! Component: 200 - total flux cleaned = 0.310502 Jy ! Total flux subtracted in 200 components = 0.310502 Jy ! Clean residual min=-0.004415 max=0.005057 Jy/beam ! Clean residual mean=0.000002 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.310502 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.310502 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9665 mas, bmaj=1.398 mas, bpa=-11.96 degrees ! Estimated noise=0.670023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599151 Jy ! Component: 100 - total flux cleaned = 0.00900822 Jy ! Component: 150 - total flux cleaned = 0.0106397 Jy ! Component: 200 - total flux cleaned = 0.0112076 Jy ! Total flux subtracted in 200 components = 0.0112076 Jy ! Clean residual min=-0.002287 max=0.002423 Jy/beam ! Clean residual mean=0.000005 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.32171 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.32171 Jy ! Inverting map ! Added new window around map position (43.4, -37.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002014 Jy ! Component: 100 - total flux cleaned = 0.00219092 Jy ! Component: 150 - total flux cleaned = 0.0023267 Jy ! Component: 200 - total flux cleaned = 0.00260155 Jy ! Total flux subtracted in 200 components = 0.00260155 Jy ! Clean residual min=-0.002383 max=0.002135 Jy/beam ! Clean residual mean=0.000004 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.324311 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.324311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=2.698 mas, bpa=-5.027 degrees ! Estimated noise=0.867287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725698 Jy ! Component: 100 - total flux cleaned = 0.000985501 Jy ! Component: 150 - total flux cleaned = 0.00119431 Jy ! Component: 200 - total flux cleaned = 0.00136386 Jy ! Total flux subtracted in 200 components = 0.00136386 Jy ! Clean residual min=-0.002650 max=0.002985 Jy/beam ! Clean residual mean=0.000010 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.325675 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27395e-05 Jy ! Component: 100 - total flux cleaned = 7.73341e-05 Jy ! Component: 150 - total flux cleaned = 7.69074e-05 Jy ! Component: 200 - total flux cleaned = 7.65977e-05 Jy ! Total flux subtracted in 200 components = 7.65977e-05 Jy ! Clean residual min=-0.002619 max=0.002990 Jy/beam ! Clean residual mean=0.000010 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.325752 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.325752 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9665 mas, bmaj=1.398 mas, bpa=-11.96 degrees ! Estimated noise=0.670023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133735 Jy ! Component: 100 - total flux cleaned = -0.00013364 Jy ! Component: 150 - total flux cleaned = -0.000191373 Jy ! Component: 200 - total flux cleaned = -0.000218236 Jy ! Total flux subtracted in 200 components = -0.000218236 Jy ! Clean residual min=-0.002342 max=0.002190 Jy/beam ! Clean residual mean=0.000004 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.325533 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.325533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054371Jy sigma=0.824428 ! Fit after self-cal, rms=0.054359Jy sigma=0.824240 wmodel /scr/pima/rv100_uvs/J0328+3940_X_map.mod ! Writing 64 model components to file: /scr/pima/rv100_uvs/J0328+3940_X_map.mod wobs /scr/pima/rv100_uvs/J0328+3940_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J0328+3940_X_uvs.fits wwins /scr/pima/rv100_uvs/J0328+3940_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J0328+3940_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184712 Jy ! Component: 100 - total flux cleaned = -0.000105613 Jy ! Component: 150 - total flux cleaned = -0.000251185 Jy ! Component: 200 - total flux cleaned = -0.000214972 Jy ! Component: 250 - total flux cleaned = -7.87473e-05 Jy ! Component: 300 - total flux cleaned = 5.18784e-05 Jy ! Component: 350 - total flux cleaned = 5.13879e-05 Jy ! Component: 400 - total flux cleaned = 2.00516e-05 Jy ! Component: 450 - total flux cleaned = -1.02361e-05 Jy ! Component: 500 - total flux cleaned = -7.0232e-05 Jy ! Component: 550 - total flux cleaned = -0.000244034 Jy ! Component: 600 - total flux cleaned = -0.000300325 Jy ! Component: 650 - total flux cleaned = -0.000411777 Jy ! Component: 700 - total flux cleaned = -0.000493883 Jy ! Component: 750 - total flux cleaned = -0.000548194 Jy ! Component: 800 - total flux cleaned = -0.00076095 Jy ! Component: 850 - total flux cleaned = -0.000812572 Jy ! Component: 900 - total flux cleaned = -0.000941729 Jy ! Component: 950 - total flux cleaned = -0.000992352 Jy ! Component: 1000 - total flux cleaned = -0.001118 Jy ! Component: 1050 - total flux cleaned = -0.00121693 Jy ! Component: 1100 - total flux cleaned = -0.0012663 Jy ! Component: 1150 - total flux cleaned = -0.00143615 Jy ! Component: 1200 - total flux cleaned = -0.00134032 Jy ! Component: 1250 - total flux cleaned = -0.00145867 Jy ! Component: 1300 - total flux cleaned = -0.00145857 Jy ! Component: 1350 - total flux cleaned = -0.00141235 Jy ! Component: 1400 - total flux cleaned = -0.00138936 Jy ! Component: 1450 - total flux cleaned = -0.0014122 Jy ! Component: 1500 - total flux cleaned = -0.00134503 Jy ! Component: 1550 - total flux cleaned = -0.00141231 Jy ! Component: 1600 - total flux cleaned = -0.00139023 Jy ! Component: 1650 - total flux cleaned = -0.0013902 Jy ! Component: 1700 - total flux cleaned = -0.00138998 Jy ! Component: 1750 - total flux cleaned = -0.0013902 Jy ! Component: 1800 - total flux cleaned = -0.00145408 Jy ! Component: 1850 - total flux cleaned = -0.00147507 Jy ! Component: 1900 - total flux cleaned = -0.00153768 Jy ! Component: 1950 - total flux cleaned = -0.00157912 Jy ! Component: 2000 - total flux cleaned = -0.00155851 Jy ! Component: 2050 - total flux cleaned = -0.00157903 Jy ! Component: 2100 - total flux cleaned = -0.00159918 Jy ! Component: 2150 - total flux cleaned = -0.00157904 Jy ! Component: 2200 - total flux cleaned = -0.00161913 Jy ! Component: 2250 - total flux cleaned = -0.00165856 Jy ! Component: 2300 - total flux cleaned = -0.00163858 Jy ! Component: 2350 - total flux cleaned = -0.00163838 Jy ! Component: 2400 - total flux cleaned = -0.00161899 Jy ! Component: 2450 - total flux cleaned = -0.00163821 Jy ! Component: 2500 - total flux cleaned = -0.001619 Jy ! Component: 2550 - total flux cleaned = -0.00163805 Jy ! Component: 2600 - total flux cleaned = -0.00173236 Jy ! Component: 2650 - total flux cleaned = -0.00182576 Jy ! Component: 2700 - total flux cleaned = -0.00176967 Jy ! Component: 2750 - total flux cleaned = -0.00182518 Jy ! Component: 2800 - total flux cleaned = -0.00189858 Jy ! Component: 2850 - total flux cleaned = -0.00193531 Jy ! Component: 2900 - total flux cleaned = -0.00202606 Jy ! Component: 2950 - total flux cleaned = -0.0021162 Jy ! Component: 3000 - total flux cleaned = -0.00216986 Jy ! Component: 3050 - total flux cleaned = -0.00218766 Jy ! Component: 3100 - total flux cleaned = -0.00227612 Jy ! Component: 3150 - total flux cleaned = -0.00236404 Jy ! Component: 3200 - total flux cleaned = -0.00238153 Jy ! Component: 3250 - total flux cleaned = -0.00245096 Jy ! Component: 3300 - total flux cleaned = -0.00246822 Jy ! Component: 3350 - total flux cleaned = -0.0025368 Jy ! Component: 3400 - total flux cleaned = -0.00257118 Jy ! Component: 3450 - total flux cleaned = -0.0026391 Jy ! Component: 3500 - total flux cleaned = -0.00262223 Jy ! Component: 3550 - total flux cleaned = -0.00273987 Jy ! Component: 3600 - total flux cleaned = -0.00275663 Jy ! Component: 3650 - total flux cleaned = -0.00283976 Jy ! Component: 3700 - total flux cleaned = -0.00285636 Jy ! Component: 3750 - total flux cleaned = -0.00285639 Jy ! Component: 3800 - total flux cleaned = -0.00292191 Jy ! Component: 3850 - total flux cleaned = -0.00305195 Jy ! Component: 3900 - total flux cleaned = -0.00301948 Jy ! Component: 3950 - total flux cleaned = -0.00305154 Jy ! Component: 4000 - total flux cleaned = -0.00313161 Jy ! Component: 4050 - total flux cleaned = -0.00311561 Jy ! Total flux subtracted in 4096 components = -0.00317907 Jy ! Clean residual min=-0.001016 max=0.000953 Jy/beam ! Clean residual mean=0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.322354 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 361 components and 0.322355 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J0328+3940_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9665 x 1.398 at -11.96 degrees (North through East) ! Clean map min=-0.0014845 max=0.30357 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0328+3940_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.303574 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000261389 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.258312 0.258312 0.516623 1.03325 2.06649 4.13299 8.26597 16.5319 33.0639 66.1278 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.303 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1161.39 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J0328+3940_X_uvs.log closed on Mon Feb 29 13:25:14 2016