! Started logfile: /scr/pima/rv100_uvs/J0328+3940_S_uvs.log on Mon Feb 29 13:25:19 2016 obs /scr/pima/rv100_uvs/J0328+3940_S_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J0328+3940_S_uva.fits ! AN table 1: 44 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0328+3940 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4928 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0328+3940_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.006637Jy sigma=16.236604 ! Fit after self-cal, rms=0.896206Jy sigma=14.425370 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=4.191 mas, bpa=-10.47 degrees ! Estimated noise=1.24107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0804223 Jy ! Component: 100 - total flux cleaned = 0.0980095 Jy ! Total flux subtracted in 100 components = 0.0980095 Jy ! Clean residual min=-0.005026 max=0.005031 Jy/beam ! Clean residual mean=-0.000017 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.0980095 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0980095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056503Jy sigma=0.861481 ! Fit after self-cal, rms=0.056500Jy sigma=0.861334 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=5.139 mas, bpa=-9.007 degrees ! Estimated noise=0.653478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00747557 Jy ! Component: 100 - total flux cleaned = 0.0114654 Jy ! Component: 150 - total flux cleaned = 0.0139203 Jy ! Component: 200 - total flux cleaned = 0.0154914 Jy ! Total flux subtracted in 200 components = 0.0154914 Jy ! Clean residual min=-0.004110 max=0.006642 Jy/beam ! Clean residual mean=-0.000051 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.113501 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 0.113501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055443Jy sigma=0.844842 ! Fit after self-cal, rms=0.055452Jy sigma=0.844449 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.612 x 5.139 at -9.007 degrees (North through East) ! Clean map min=-0.0039932 max=0.10339 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.03 KP 0.96 LA 0.96 MK 1.06 ! NL 1.07 OV 1.04 PT 0.90 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.94 LA 1.01 MK 1.02 ! NL 1.08 OV 1.02 PT 0.93 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.05 KP 0.97 LA 0.94 MK 1.00 ! NL 1.05 OV 1.02 PT 0.93 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 1.03 LA 0.96 MK 0.95 ! NL 1.06 OV 1.03 PT 0.97 SC 0.97 ! ! ! Fit before self-cal, rms=0.055452Jy sigma=0.844449 ! Fit after self-cal, rms=0.054998Jy sigma=0.837888 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=5.158 mas, bpa=-8.524 degrees ! Estimated noise=0.65323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672413 Jy ! Component: 100 - total flux cleaned = 0.0105702 Jy ! Component: 150 - total flux cleaned = 0.0132091 Jy ! Component: 200 - total flux cleaned = 0.0151079 Jy ! Total flux subtracted in 200 components = 0.0151079 Jy ! Clean residual min=-0.003746 max=0.004163 Jy/beam ! Clean residual mean=-0.000036 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.128609 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 62 components and 0.128609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054143Jy sigma=0.821578 ! Fit after self-cal, rms=0.054117Jy sigma=0.819896 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054117Jy sigma=0.819896 ! Fit after self-cal, rms=0.053591Jy sigma=0.813825 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=5.175 mas, bpa=-8.939 degrees ! Estimated noise=0.648207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230186 Jy ! Component: 100 - total flux cleaned = 0.00336834 Jy ! Component: 150 - total flux cleaned = 0.00363211 Jy ! Component: 200 - total flux cleaned = 0.00374674 Jy ! Total flux subtracted in 200 components = 0.00374674 Jy ! Clean residual min=-0.002793 max=0.002932 Jy/beam ! Clean residual mean=-0.000016 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.132356 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 0.132356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053482Jy sigma=0.811824 ! Fit after self-cal, rms=0.053484Jy sigma=0.811509 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463484 Jy ! Component: 100 - total flux cleaned = 0.000571585 Jy ! Component: 150 - total flux cleaned = 0.00068663 Jy ! Component: 200 - total flux cleaned = 0.000769445 Jy ! Total flux subtracted in 200 components = 0.000769445 Jy ! Clean residual min=-0.002787 max=0.002849 Jy/beam ! Clean residual mean=-0.000016 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.133125 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.133125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053454Jy sigma=0.811130 ! Fit after self-cal, rms=0.053455Jy sigma=0.811065 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053455Jy sigma=0.811065 ! Fit after self-cal, rms=0.053331Jy sigma=0.810862 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=5.176 mas, bpa=-9.013 degrees ! Estimated noise=0.64601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163103 Jy ! Component: 100 - total flux cleaned = 0.00030592 Jy ! Component: 150 - total flux cleaned = 0.000364546 Jy ! Component: 200 - total flux cleaned = 0.00039914 Jy ! Total flux subtracted in 200 components = 0.00039914 Jy ! Clean residual min=-0.002737 max=0.002801 Jy/beam ! Clean residual mean=-0.000016 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.133524 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.133524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053310Jy sigma=0.810571 ! Fit after self-cal, rms=0.053314Jy sigma=0.810525 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.03179e-05 Jy ! Component: 100 - total flux cleaned = 0.000130534 Jy ! Component: 150 - total flux cleaned = 0.000176719 Jy ! Component: 200 - total flux cleaned = 0.000219484 Jy ! Total flux subtracted in 200 components = 0.000219484 Jy ! Clean residual min=-0.002745 max=0.002769 Jy/beam ! Clean residual mean=-0.000016 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.133744 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 112 components and 0.133744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053302Jy sigma=0.810386 ! Fit after self-cal, rms=0.053304Jy sigma=0.810362 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053304Jy sigma=0.810362 ! Fit after self-cal, rms=0.053190Jy sigma=0.810328 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.383 mas, bmaj=9.68 mas, bpa=-3.008 degrees ! Estimated noise=0.801216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011123 Jy ! Component: 100 - total flux cleaned = -5.91355e-05 Jy ! Component: 150 - total flux cleaned = 1.62027e-06 Jy ! Component: 200 - total flux cleaned = 8.48521e-05 Jy ! Total flux subtracted in 200 components = 8.48521e-05 Jy ! Clean residual min=-0.003476 max=0.003889 Jy/beam ! Clean residual mean=-0.000035 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.133829 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 118 components and 0.133829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053187Jy sigma=0.810422 ! Fit after self-cal, rms=0.053183Jy sigma=0.810216 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.62053e-05 Jy ! Component: 100 - total flux cleaned = 4.83718e-05 Jy ! Component: 150 - total flux cleaned = 9.62337e-05 Jy ! Component: 200 - total flux cleaned = 0.000137799 Jy ! Total flux subtracted in 200 components = 0.000137799 Jy ! Clean residual min=-0.003491 max=0.003821 Jy/beam ! Clean residual mean=-0.000035 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.133966 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 0.133966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053186Jy sigma=0.810328 ! Fit after self-cal, rms=0.053186Jy sigma=0.810235 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=5.176 mas, bpa=-9.086 degrees ! Estimated noise=0.644308 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 5.176 at -9.086 degrees (North through East) ! Clean map min=-0.0026383 max=0.10319 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=4.21 mas, bpa=-10.9 degrees ! Estimated noise=1.23754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799138 Jy ! Component: 100 - total flux cleaned = 0.0979146 Jy ! Component: 150 - total flux cleaned = 0.105301 Jy ! Component: 200 - total flux cleaned = 0.110342 Jy ! Total flux subtracted in 200 components = 0.110342 Jy ! Clean residual min=-0.004747 max=0.004884 Jy/beam ! Clean residual mean=-0.000008 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.110342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.110342 Jy ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=5.176 mas, bpa=-9.086 degrees ! Estimated noise=0.644308 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571244 Jy ! Component: 100 - total flux cleaned = 0.00961613 Jy ! Component: 150 - total flux cleaned = 0.0126338 Jy ! Component: 200 - total flux cleaned = 0.0150187 Jy ! Total flux subtracted in 200 components = 0.0150187 Jy ! Clean residual min=-0.002816 max=0.003319 Jy/beam ! Clean residual mean=-0.000022 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.12536 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.125361 Jy ! Inverting map ! Added new window around map position (36, -102.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310302 Jy ! Component: 100 - total flux cleaned = 0.00508921 Jy ! Component: 150 - total flux cleaned = 0.00669077 Jy ! Component: 200 - total flux cleaned = 0.00802923 Jy ! Total flux subtracted in 200 components = 0.00802923 Jy ! Clean residual min=-0.002489 max=0.002393 Jy/beam ! Clean residual mean=-0.000013 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.13339 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 82 components and 0.13339 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.383 mas, bmaj=9.68 mas, bpa=-3.008 degrees ! Estimated noise=0.801216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204285 Jy ! Component: 100 - total flux cleaned = 0.00341602 Jy ! Component: 150 - total flux cleaned = 0.00442244 Jy ! Component: 200 - total flux cleaned = 0.00503531 Jy ! Total flux subtracted in 200 components = 0.00503531 Jy ! Clean residual min=-0.003049 max=0.003018 Jy/beam ! Clean residual mean=-0.000019 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.138425 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225242 Jy ! Component: 100 - total flux cleaned = 0.000420181 Jy ! Component: 150 - total flux cleaned = 0.000553461 Jy ! Component: 200 - total flux cleaned = 0.000639076 Jy ! Total flux subtracted in 200 components = 0.000639076 Jy ! Clean residual min=-0.003086 max=0.003076 Jy/beam ! Clean residual mean=-0.000017 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.139064 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 123 components and 0.139064 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.623 mas, bmaj=5.176 mas, bpa=-9.086 degrees ! Estimated noise=0.644308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209629 Jy ! Component: 100 - total flux cleaned = -0.000106598 Jy ! Component: 150 - total flux cleaned = -0.000106859 Jy ! Component: 200 - total flux cleaned = -0.000106437 Jy ! Total flux subtracted in 200 components = -0.000106437 Jy ! Clean residual min=-0.002382 max=0.002267 Jy/beam ! Clean residual mean=-0.000009 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.138958 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.138958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053051Jy sigma=0.807623 ! Fit after self-cal, rms=0.053021Jy sigma=0.807095 wmodel /scr/pima/rv100_uvs/J0328+3940_S_map.mod ! Writing 138 model components to file: /scr/pima/rv100_uvs/J0328+3940_S_map.mod wobs /scr/pima/rv100_uvs/J0328+3940_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J0328+3940_S_uvs.fits wwins /scr/pima/rv100_uvs/J0328+3940_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J0328+3940_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000349386 Jy ! Component: 100 - total flux cleaned = -0.000425115 Jy ! Component: 150 - total flux cleaned = -0.000388716 Jy ! Component: 200 - total flux cleaned = -0.000458472 Jy ! Component: 250 - total flux cleaned = -0.000591588 Jy ! Component: 300 - total flux cleaned = -0.000720284 Jy ! Component: 350 - total flux cleaned = -0.000876571 Jy ! Component: 400 - total flux cleaned = -0.000937428 Jy ! Component: 450 - total flux cleaned = -0.00105586 Jy ! Component: 500 - total flux cleaned = -0.00114195 Jy ! Component: 550 - total flux cleaned = -0.0012546 Jy ! Component: 600 - total flux cleaned = -0.00133617 Jy ! Component: 650 - total flux cleaned = -0.00133661 Jy ! Component: 700 - total flux cleaned = -0.00141534 Jy ! Component: 750 - total flux cleaned = -0.00141559 Jy ! Component: 800 - total flux cleaned = -0.0015164 Jy ! Component: 850 - total flux cleaned = -0.00151754 Jy ! Component: 900 - total flux cleaned = -0.00156632 Jy ! Component: 950 - total flux cleaned = -0.00161345 Jy ! Component: 1000 - total flux cleaned = -0.00165972 Jy ! Component: 1050 - total flux cleaned = -0.0016365 Jy ! Component: 1100 - total flux cleaned = -0.00165873 Jy ! Component: 1150 - total flux cleaned = -0.00165834 Jy ! Component: 1200 - total flux cleaned = -0.00165853 Jy ! Component: 1250 - total flux cleaned = -0.00167968 Jy ! Component: 1300 - total flux cleaned = -0.00172164 Jy ! Component: 1350 - total flux cleaned = -0.00174242 Jy ! Component: 1400 - total flux cleaned = -0.00178298 Jy ! Component: 1450 - total flux cleaned = -0.00186274 Jy ! Component: 1500 - total flux cleaned = -0.00188212 Jy ! Component: 1550 - total flux cleaned = -0.00201798 Jy ! Component: 1600 - total flux cleaned = -0.00203701 Jy ! Component: 1650 - total flux cleaned = -0.00213143 Jy ! Component: 1700 - total flux cleaned = -0.00220627 Jy ! Component: 1750 - total flux cleaned = -0.00224327 Jy ! Component: 1800 - total flux cleaned = -0.00238925 Jy ! Component: 1850 - total flux cleaned = -0.00240684 Jy ! Component: 1900 - total flux cleaned = -0.00240717 Jy ! Component: 1950 - total flux cleaned = -0.00251281 Jy ! Component: 2000 - total flux cleaned = -0.00251278 Jy ! Component: 2050 - total flux cleaned = -0.00249536 Jy ! Component: 2100 - total flux cleaned = -0.00259814 Jy ! Component: 2150 - total flux cleaned = -0.00256427 Jy ! Component: 2200 - total flux cleaned = -0.00259793 Jy ! Component: 2250 - total flux cleaned = -0.00259767 Jy ! Component: 2300 - total flux cleaned = -0.00263056 Jy ! Component: 2350 - total flux cleaned = -0.00261416 Jy ! Component: 2400 - total flux cleaned = -0.00266278 Jy ! Component: 2450 - total flux cleaned = -0.00266255 Jy ! Component: 2500 - total flux cleaned = -0.00264653 Jy ! Component: 2550 - total flux cleaned = -0.00259914 Jy ! Component: 2600 - total flux cleaned = -0.00261475 Jy ! Component: 2650 - total flux cleaned = -0.00258408 Jy ! Component: 2700 - total flux cleaned = -0.00264563 Jy ! Component: 2750 - total flux cleaned = -0.00261528 Jy ! Component: 2800 - total flux cleaned = -0.00264562 Jy ! Component: 2850 - total flux cleaned = -0.00264563 Jy ! Component: 2900 - total flux cleaned = -0.00261586 Jy ! Component: 2950 - total flux cleaned = -0.00263068 Jy ! Component: 3000 - total flux cleaned = -0.00264536 Jy ! Component: 3050 - total flux cleaned = -0.00261622 Jy ! Component: 3100 - total flux cleaned = -0.00258734 Jy ! Component: 3150 - total flux cleaned = -0.00261606 Jy ! Component: 3200 - total flux cleaned = -0.00263026 Jy ! Component: 3250 - total flux cleaned = -0.00261602 Jy ! Component: 3300 - total flux cleaned = -0.00261594 Jy ! Component: 3350 - total flux cleaned = -0.00258801 Jy ! Component: 3400 - total flux cleaned = -0.00262943 Jy ! Component: 3450 - total flux cleaned = -0.00261575 Jy ! Component: 3500 - total flux cleaned = -0.00261579 Jy ! Component: 3550 - total flux cleaned = -0.00264286 Jy ! Component: 3600 - total flux cleaned = -0.00258901 Jy ! Component: 3650 - total flux cleaned = -0.00269599 Jy ! Component: 3700 - total flux cleaned = -0.00268259 Jy ! Component: 3750 - total flux cleaned = -0.00269569 Jy ! Component: 3800 - total flux cleaned = -0.00274804 Jy ! Component: 3850 - total flux cleaned = -0.00270896 Jy ! Component: 3900 - total flux cleaned = -0.00273472 Jy ! Component: 3950 - total flux cleaned = -0.00269627 Jy ! Component: 4000 - total flux cleaned = -0.00277289 Jy ! Component: 4050 - total flux cleaned = -0.00278544 Jy ! Total flux subtracted in 4096 components = -0.00279805 Jy ! Clean residual min=-0.000939 max=0.000759 Jy/beam ! Clean residual mean=0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.13616 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 415 components and 0.13616 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J0328+3940_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.623 x 5.176 at -9.086 degrees (North through East) ! Clean map min=-0.0017063 max=0.10184 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0328+3940_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000215623 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.635204 0.635204 1.27041 2.54081 5.08163 10.1633 20.3265 40.653 81.3061 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.101 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 472.289 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J0328+3940_S_uvs.log closed on Mon Feb 29 13:25:23 2016