! Started logfile: /scr/pima/rv100_uvs/J0239-0234_S_uvs.log on Mon Feb 29 13:24:53 2016
obs /scr/pima/rv100_uvs/J0239-0234_S_uva.fits
! Reading UV FITS file: /scr/pima/rv100_uvs/J0239-0234_S_uva.fits
! AN table 1: 15 integrations on 1 of 1 possible baselines.
! AN table 2: 33 integrations on 3 of 3 possible baselines.
! AN table 3: 52 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.287828 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0239-0234
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3424 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0239-0234_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 51 telescope corrections were flagged in sub-array 2.
!  A total of 348 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 51 telescope corrections were flagged in sub-array 2.
!  A total of 348 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 51 telescope corrections were flagged in sub-array 2.
!  A total of 348 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 51 telescope corrections were flagged in sub-array 2.
!  A total of 348 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.084313Jy  sigma=7.893319
! Fit after  self-cal, rms=0.615180Jy  sigma=4.406725
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.307 mas, bmaj=3.384 mas, bpa=18.15 degrees
! Estimated noise=3.04939 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.31217 Jy
! Component: 100  -  total flux cleaned = 0.389085 Jy
! Total flux subtracted in 100 components = 0.389085 Jy
! Clean residual min=-0.011414 max=0.025769 Jy/beam
! Clean residual mean=0.000002 rms=0.002652 Jy/beam
! Combined flux in latest and established models = 0.389085 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.389085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112175Jy  sigma=0.677697
! Fit after  self-cal, rms=0.111627Jy  sigma=0.676874
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228827 Jy
! Component: 100  -  total flux cleaned = 0.0292804 Jy
! Total flux subtracted in 100 components = 0.0292804 Jy
! Clean residual min=-0.009370 max=0.011034 Jy/beam
! Clean residual mean=-0.000013 rms=0.002186 Jy/beam
! Combined flux in latest and established models = 0.418365 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.418365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108456Jy  sigma=0.647702
! Fit after  self-cal, rms=0.108269Jy  sigma=0.647448
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.246 mas, bmaj=3.468 mas, bpa=33.12 degrees
! Estimated noise=2.03117 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.5, -16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122291 Jy
! Component: 100  -  total flux cleaned = 0.0150965 Jy
! Component: 150  -  total flux cleaned = 0.0165732 Jy
! Component: 200  -  total flux cleaned = 0.0171819 Jy
! Total flux subtracted in 200 components = 0.0171819 Jy
! Clean residual min=-0.007726 max=0.007733 Jy/beam
! Clean residual mean=-0.000144 rms=0.001812 Jy/beam
! Combined flux in latest and established models = 0.435547 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 32 components and 0.435547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106734Jy  sigma=0.635933
! Fit after  self-cal, rms=0.106651Jy  sigma=0.635024
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.246 x 3.468 at 33.12 degrees (North through East)
! Clean map  min=-0.0069403  max=0.38616 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    SC        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    NY        0.00*    WF        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.94     HN        1.02     KP        0.97     LA        1.00     
!   MK        0.87     NL        1.00     NY        1.05     OV        1.01     
!   PT        1.01     SC        1.01     WF        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    SC        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    NY        0.00*    WF        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HH        1.00     HN        0.97     KP        1.00     LA        1.00     
!   MK        1.04     NL        1.00     NY        1.10     OV        0.98     
!   PT        0.99     SC        1.00     WF        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    SC        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    NY        0.00*    WF        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.91     HN        1.02     KP        0.97     LA        1.00     
!   MK        1.01     NL        1.01     NY        1.11     OV        0.96     
!   PT        0.98     SC        1.02     WF        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    SC        0.00*    
! 
!  A total of 48 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    NY        0.00*    WF        0.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.98     HN        1.03     KP        0.99     LA        0.99     
!   MK        0.97     NL        1.04     NY        1.11     OV        0.98     
!   PT        1.01     SC        1.00     WF        1.04     
! 
! 
! Fit before self-cal, rms=0.106651Jy  sigma=0.635024
! Fit after  self-cal, rms=0.101694Jy  sigma=0.575300
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.514 mas, bmaj=4.064 mas, bpa=18.61 degrees
! Estimated noise=2.15877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182371 Jy
! Component: 100  -  total flux cleaned = 0.00198072 Jy
! Component: 150  -  total flux cleaned = 0.00191525 Jy
! Component: 200  -  total flux cleaned = 0.00191409 Jy
! Total flux subtracted in 200 components = 0.00191409 Jy
! Clean residual min=-0.005624 max=0.005660 Jy/beam
! Clean residual mean=0.000175 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.437461 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 0.437461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101537Jy  sigma=0.574699
! Fit after  self-cal, rms=0.101578Jy  sigma=0.574498
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101578Jy  sigma=0.574498
! Fit after  self-cal, rms=0.101755Jy  sigma=0.571342
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.514 mas, bmaj=4.069 mas, bpa=18.79 degrees
! Estimated noise=2.15354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457497 Jy
! Component: 100  -  total flux cleaned = 0.000620535 Jy
! Component: 150  -  total flux cleaned = 0.00081921 Jy
! Component: 200  -  total flux cleaned = 0.00092752 Jy
! Total flux subtracted in 200 components = 0.00092752 Jy
! Clean residual min=-0.005146 max=0.005311 Jy/beam
! Clean residual mean=0.000113 rms=0.001243 Jy/beam
! Combined flux in latest and established models = 0.438388 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.438388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101603Jy  sigma=0.570771
! Fit after  self-cal, rms=0.101605Jy  sigma=0.570628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-36.5, -23).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440062 Jy
! Component: 100  -  total flux cleaned = 0.00491473 Jy
! Component: 150  -  total flux cleaned = 0.00508827 Jy
! Component: 200  -  total flux cleaned = 0.00524584 Jy
! Total flux subtracted in 200 components = 0.00524584 Jy
! Clean residual min=-0.005036 max=0.004630 Jy/beam
! Clean residual mean=0.000016 rms=0.001162 Jy/beam
! Combined flux in latest and established models = 0.443634 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.443634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101268Jy  sigma=0.568901
! Fit after  self-cal, rms=0.101270Jy  sigma=0.568761
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101270Jy  sigma=0.568761
! Fit after  self-cal, rms=0.100380Jy  sigma=0.561703
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.512 mas, bmaj=4.076 mas, bpa=18.86 degrees
! Estimated noise=2.15035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000721981 Jy
! Component: 100  -  total flux cleaned = 0.000867305 Jy
! Component: 150  -  total flux cleaned = 0.000933958 Jy
! Component: 200  -  total flux cleaned = 0.000993342 Jy
! Total flux subtracted in 200 components = 0.000993342 Jy
! Clean residual min=-0.004876 max=0.004111 Jy/beam
! Clean residual mean=0.000009 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.444628 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.444628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100241Jy  sigma=0.561198
! Fit after  self-cal, rms=0.100264Jy  sigma=0.561151
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182219 Jy
! Component: 100  -  total flux cleaned = 0.000182196 Jy
! Component: 150  -  total flux cleaned = 0.000129378 Jy
! Component: 200  -  total flux cleaned = 0.000181025 Jy
! Total flux subtracted in 200 components = 0.000181025 Jy
! Clean residual min=-0.004908 max=0.004074 Jy/beam
! Clean residual mean=0.000006 rms=0.001067 Jy/beam
! Combined flux in latest and established models = 0.444809 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.444809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100183Jy  sigma=0.560847
! Fit after  self-cal, rms=0.100186Jy  sigma=0.560833
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100186Jy  sigma=0.560833
! Fit after  self-cal, rms=0.100322Jy  sigma=0.560750
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.135 mas, bmaj=14.98 mas, bpa=-15.04 degrees
! Estimated noise=2.82252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252667 Jy
! Component: 100  -  total flux cleaned = -5.78177e-05 Jy
! Component: 150  -  total flux cleaned = 9.60232e-05 Jy
! Component: 200  -  total flux cleaned = 0.000160097 Jy
! Total flux subtracted in 200 components = 0.000160097 Jy
! Clean residual min=-0.004725 max=0.004945 Jy/beam
! Clean residual mean=0.000034 rms=0.001375 Jy/beam
! Combined flux in latest and established models = 0.444969 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 80 components and 0.444969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100277Jy  sigma=0.560750
! Fit after  self-cal, rms=0.100268Jy  sigma=0.560704
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000538484 Jy
! Component: 100  -  total flux cleaned = 0.000687492 Jy
! Component: 150  -  total flux cleaned = 0.000713654 Jy
! Component: 200  -  total flux cleaned = 0.000737568 Jy
! Total flux subtracted in 200 components = 0.000737568 Jy
! Clean residual min=-0.004756 max=0.004937 Jy/beam
! Clean residual mean=0.000000 rms=0.001382 Jy/beam
! Combined flux in latest and established models = 0.445706 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 82 components and 0.445706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100253Jy  sigma=0.560762
! Fit after  self-cal, rms=0.100244Jy  sigma=0.560744
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=4.081 mas, bpa=18.93 degrees
! Estimated noise=2.1488 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.511 x 4.081 at 18.93 degrees (North through East)
! Clean map  min=-0.0044452  max=0.39616 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.442 mas, bmaj=4.104 mas, bpa=3.791 degrees
! Estimated noise=3.17652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.314933 Jy
! Component: 100  -  total flux cleaned = 0.387834 Jy
! Component: 150  -  total flux cleaned = 0.408851 Jy
! Component: 200  -  total flux cleaned = 0.419541 Jy
! Total flux subtracted in 200 components = 0.419541 Jy
! Clean residual min=-0.008941 max=0.009874 Jy/beam
! Clean residual mean=0.000005 rms=0.001972 Jy/beam
! Combined flux in latest and established models = 0.419541 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.419541 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=4.081 mas, bpa=18.93 degrees
! Estimated noise=2.1488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00923819 Jy
! Component: 100  -  total flux cleaned = 0.0149905 Jy
! Component: 150  -  total flux cleaned = 0.0191722 Jy
! Component: 200  -  total flux cleaned = 0.0211416 Jy
! Total flux subtracted in 200 components = 0.0211416 Jy
! Clean residual min=-0.004961 max=0.004779 Jy/beam
! Clean residual mean=0.000096 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.440683 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 35 components and 0.440683 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.135 mas, bmaj=14.98 mas, bpa=-15.04 degrees
! Estimated noise=2.82252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00283418 Jy
! Component: 100  -  total flux cleaned = 0.00426929 Jy
! Component: 150  -  total flux cleaned = 0.00456034 Jy
! Component: 200  -  total flux cleaned = 0.00470537 Jy
! Total flux subtracted in 200 components = 0.00470537 Jy
! Clean residual min=-0.004802 max=0.004953 Jy/beam
! Clean residual mean=0.000017 rms=0.001394 Jy/beam
! Combined flux in latest and established models = 0.445388 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.96919e-05 Jy
! Component: 100  -  total flux cleaned = 0.000190281 Jy
! Component: 150  -  total flux cleaned = 0.000218345 Jy
! Component: 200  -  total flux cleaned = 0.000271083 Jy
! Total flux subtracted in 200 components = 0.000271083 Jy
! Clean residual min=-0.004748 max=0.004883 Jy/beam
! Clean residual mean=0.000004 rms=0.001391 Jy/beam
! Combined flux in latest and established models = 0.445659 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.445659 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.511 mas, bmaj=4.081 mas, bpa=18.93 degrees
! Estimated noise=2.1488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.67491e-05 Jy
! Component: 100  -  total flux cleaned = 2.13285e-05 Jy
! Component: 150  -  total flux cleaned = -4.93428e-05 Jy
! Component: 200  -  total flux cleaned = -5.08238e-05 Jy
! Total flux subtracted in 200 components = -5.08238e-05 Jy
! Clean residual min=-0.005072 max=0.004222 Jy/beam
! Clean residual mean=0.000002 rms=0.001090 Jy/beam
! Combined flux in latest and established models = 0.445608 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 67 components and 0.445608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100385Jy  sigma=0.561281
! Fit after  self-cal, rms=0.100358Jy  sigma=0.561060
wmodel /scr/pima/rv100_uvs/J0239-0234_S_map.mod
! Writing 67 model components to file: /scr/pima/rv100_uvs/J0239-0234_S_map.mod
wobs /scr/pima/rv100_uvs/J0239-0234_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv100_uvs/J0239-0234_S_uvs.fits
wwins /scr/pima/rv100_uvs/J0239-0234_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J0239-0234_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141254 Jy
! Component: 100  -  total flux cleaned = -0.00156517 Jy
! Component: 150  -  total flux cleaned = -0.00171124 Jy
! Component: 200  -  total flux cleaned = -0.00185115 Jy
! Component: 250  -  total flux cleaned = -0.00171371 Jy
! Component: 300  -  total flux cleaned = -0.00164708 Jy
! Component: 350  -  total flux cleaned = -0.00151834 Jy
! Component: 400  -  total flux cleaned = -0.00132844 Jy
! Component: 450  -  total flux cleaned = -0.00120449 Jy
! Component: 500  -  total flux cleaned = -0.000900761 Jy
! Component: 550  -  total flux cleaned = -0.000603413 Jy
! Component: 600  -  total flux cleaned = -0.000545377 Jy
! Component: 650  -  total flux cleaned = -0.000372289 Jy
! Component: 700  -  total flux cleaned = -0.000259415 Jy
! Component: 750  -  total flux cleaned = -0.000148493 Jy
! Component: 800  -  total flux cleaned = -0.000203308 Jy
! Component: 850  -  total flux cleaned = -9.47955e-05 Jy
! Component: 900  -  total flux cleaned = 1.14179e-05 Jy
! Component: 950  -  total flux cleaned = 0.000116567 Jy
! Component: 1000  -  total flux cleaned = 0.000168416 Jy
! Component: 1050  -  total flux cleaned = 0.000270409 Jy
! Component: 1100  -  total flux cleaned = 0.000320574 Jy
! Component: 1150  -  total flux cleaned = 0.000470154 Jy
! Component: 1200  -  total flux cleaned = 0.000371313 Jy
! Component: 1250  -  total flux cleaned = 0.000518005 Jy
! Component: 1300  -  total flux cleaned = 0.000566165 Jy
! Component: 1350  -  total flux cleaned = 0.000566584 Jy
! Component: 1400  -  total flux cleaned = 0.000613839 Jy
! Component: 1450  -  total flux cleaned = 0.000613865 Jy
! Component: 1500  -  total flux cleaned = 0.000613583 Jy
! Component: 1550  -  total flux cleaned = 0.000567525 Jy
! Component: 1600  -  total flux cleaned = 0.000476996 Jy
! Component: 1650  -  total flux cleaned = 0.000567203 Jy
! Component: 1700  -  total flux cleaned = 0.000522299 Jy
! Component: 1750  -  total flux cleaned = 0.000477951 Jy
! Component: 1800  -  total flux cleaned = 0.00052162 Jy
! Component: 1850  -  total flux cleaned = 0.000390739 Jy
! Component: 1900  -  total flux cleaned = 0.000434081 Jy
! Component: 1950  -  total flux cleaned = 0.000476744 Jy
! Component: 2000  -  total flux cleaned = 0.000391484 Jy
! Component: 2050  -  total flux cleaned = 0.000476139 Jy
! Component: 2100  -  total flux cleaned = 0.000476303 Jy
! Component: 2150  -  total flux cleaned = 0.000476261 Jy
! Component: 2200  -  total flux cleaned = 0.000476415 Jy
! Component: 2250  -  total flux cleaned = 0.000558942 Jy
! Component: 2300  -  total flux cleaned = 0.000558819 Jy
! Component: 2350  -  total flux cleaned = 0.000558892 Jy
! Component: 2400  -  total flux cleaned = 0.000558956 Jy
! Component: 2450  -  total flux cleaned = 0.000598969 Jy
! Component: 2500  -  total flux cleaned = 0.000599028 Jy
! Component: 2550  -  total flux cleaned = 0.000598954 Jy
! Component: 2600  -  total flux cleaned = 0.000638147 Jy
! Component: 2650  -  total flux cleaned = 0.000676802 Jy
! Component: 2700  -  total flux cleaned = 0.000598998 Jy
! Component: 2750  -  total flux cleaned = 0.000637594 Jy
! Component: 2800  -  total flux cleaned = 0.000675919 Jy
! Component: 2850  -  total flux cleaned = 0.000675838 Jy
! Component: 2900  -  total flux cleaned = 0.000713745 Jy
! Component: 2950  -  total flux cleaned = 0.000713864 Jy
! Component: 3000  -  total flux cleaned = 0.000751258 Jy
! Component: 3050  -  total flux cleaned = 0.000751213 Jy
! Component: 3100  -  total flux cleaned = 0.000825091 Jy
! Component: 3150  -  total flux cleaned = 0.000861841 Jy
! Component: 3200  -  total flux cleaned = 0.000861767 Jy
! Component: 3250  -  total flux cleaned = 0.000861759 Jy
! Component: 3300  -  total flux cleaned = 0.000897782 Jy
! Component: 3350  -  total flux cleaned = 0.00093379 Jy
! Component: 3400  -  total flux cleaned = 0.00104115 Jy
! Component: 3450  -  total flux cleaned = 0.00104112 Jy
! Component: 3500  -  total flux cleaned = 0.00111189 Jy
! Component: 3550  -  total flux cleaned = 0.00114685 Jy
! Component: 3600  -  total flux cleaned = 0.00114665 Jy
! Component: 3650  -  total flux cleaned = 0.00118165 Jy
! Component: 3700  -  total flux cleaned = 0.00118183 Jy
! Component: 3750  -  total flux cleaned = 0.00128535 Jy
! Component: 3800  -  total flux cleaned = 0.00125095 Jy
! Component: 3850  -  total flux cleaned = 0.00135329 Jy
! Component: 3900  -  total flux cleaned = 0.00138722 Jy
! Component: 3950  -  total flux cleaned = 0.0013872 Jy
! Component: 4000  -  total flux cleaned = 0.00138734 Jy
! Component: 4050  -  total flux cleaned = 0.00148756 Jy
! Total flux subtracted in 4096 components = 0.00142108 Jy
! Clean residual min=-0.002144 max=0.001833 Jy/beam
! Clean residual mean=0.000009 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.447029 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 344 components and 0.447029 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rv100_uvs/J0239-0234_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.511 x 4.081 at 18.93 degrees (North through East)
! Clean map  min=-0.0034823  max=0.39312 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0239-0234_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.39312 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000576999 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.440324 0.440324 0.880647 1.76129 3.52259 7.04518 14.0904 28.1807 56.3614
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.393 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  681.317 
quit
! Quitting program
! Log file /scr/pima/rv100_uvs/J0239-0234_S_uvs.log closed on Mon Feb 29 13:24:57 2016