! Started logfile: /scr/pima/rv100_uvs/J0049+0237_S_uvs.log on Mon Feb 29 13:24:26 2016 obs /scr/pima/rv100_uvs/J0049+0237_S_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J0049+0237_S_uva.fits ! AN table 1: 53 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.818509 visibilities/baseline/integration-bin. ! Found source: J0049+0237 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 3644 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0049+0237_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008892Jy sigma=15.790785 ! Fit after self-cal, rms=0.840648Jy sigma=13.261616 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=7.754 mas, bpa=17.65 degrees ! Estimated noise=1.22893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120331 Jy ! Component: 100 - total flux cleaned = 0.147584 Jy ! Total flux subtracted in 100 components = 0.147584 Jy ! Clean residual min=-0.006063 max=0.010375 Jy/beam ! Clean residual mean=0.000011 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.147584 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.147584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061534Jy sigma=0.946386 ! Fit after self-cal, rms=0.061524Jy sigma=0.946253 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.467 mas, bmaj=8.648 mas, bpa=12.67 degrees ! Estimated noise=0.782409 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178611 Jy ! Component: 100 - total flux cleaned = 0.0271269 Jy ! Component: 150 - total flux cleaned = 0.0324923 Jy ! Component: 200 - total flux cleaned = 0.0359066 Jy ! Total flux subtracted in 200 components = 0.0359066 Jy ! Clean residual min=-0.003154 max=0.006527 Jy/beam ! Clean residual mean=0.000006 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.18349 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.18349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056550Jy sigma=0.858905 ! Fit after self-cal, rms=0.056459Jy sigma=0.857340 ! Inverting map ! Added new window around map position (8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550598 Jy ! Component: 100 - total flux cleaned = 0.00827937 Jy ! Component: 150 - total flux cleaned = 0.0093639 Jy ! Component: 200 - total flux cleaned = 0.0101038 Jy ! Total flux subtracted in 200 components = 0.0101038 Jy ! Clean residual min=-0.002498 max=0.002673 Jy/beam ! Clean residual mean=0.000002 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.193594 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 69 components and 0.193594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055961Jy sigma=0.848178 ! Fit after self-cal, rms=0.055917Jy sigma=0.847339 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.467 x 8.648 at 12.67 degrees (North through East) ! Clean map min=-0.0022409 max=0.16083 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.03 KP 0.97 LA 0.98 NL 1.01 ! OV 1.01 PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.98 KP 1.00 LA 1.00 NL 1.01 ! OV 0.99 PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.00 KP 0.98 LA 1.02 NL 1.00 ! OV 0.97 PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.01 KP 1.02 LA 0.97 NL 0.99 ! OV 0.99 PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.055917Jy sigma=0.847339 ! Fit after self-cal, rms=0.055794Jy sigma=0.847048 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=8.634 mas, bpa=12.01 degrees ! Estimated noise=0.785555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132734 Jy ! Component: 100 - total flux cleaned = 0.00178245 Jy ! Component: 150 - total flux cleaned = 0.00183627 Jy ! Component: 200 - total flux cleaned = 0.00188398 Jy ! Total flux subtracted in 200 components = 0.00188398 Jy ! Clean residual min=-0.002106 max=0.002442 Jy/beam ! Clean residual mean=0.000004 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.195478 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.195478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055755Jy sigma=0.846433 ! Fit after self-cal, rms=0.055754Jy sigma=0.846339 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055754Jy sigma=0.846339 ! Fit after self-cal, rms=0.055718Jy sigma=0.845072 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=8.634 mas, bpa=12.04 degrees ! Estimated noise=0.786059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084189 Jy ! Component: 100 - total flux cleaned = 0.00108159 Jy ! Component: 150 - total flux cleaned = 0.00116036 Jy ! Component: 200 - total flux cleaned = 0.00117828 Jy ! Total flux subtracted in 200 components = 0.00117828 Jy ! Clean residual min=-0.001918 max=0.002266 Jy/beam ! Clean residual mean=0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.196656 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 0.196656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055703Jy sigma=0.844759 ! Fit after self-cal, rms=0.055702Jy sigma=0.844727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-108.5, -28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171146 Jy ! Component: 100 - total flux cleaned = 0.00208417 Jy ! Component: 150 - total flux cleaned = 0.00251671 Jy ! Component: 200 - total flux cleaned = 0.00277228 Jy ! Total flux subtracted in 200 components = 0.00277228 Jy ! Clean residual min=-0.001859 max=0.001917 Jy/beam ! Clean residual mean=0.000002 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.199429 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 0.199429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055638Jy sigma=0.843534 ! Fit after self-cal, rms=0.055629Jy sigma=0.843428 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055629Jy sigma=0.843428 ! Fit after self-cal, rms=0.055703Jy sigma=0.843027 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.526 mas, bmaj=8.639 mas, bpa=12.02 degrees ! Estimated noise=0.78644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000895511 Jy ! Component: 100 - total flux cleaned = 0.00112924 Jy ! Component: 150 - total flux cleaned = 0.00122999 Jy ! Component: 200 - total flux cleaned = 0.00132279 Jy ! Total flux subtracted in 200 components = 0.00132279 Jy ! Clean residual min=-0.001891 max=0.001898 Jy/beam ! Clean residual mean=0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.200751 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 133 components and 0.200751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055686Jy sigma=0.842680 ! Fit after self-cal, rms=0.055688Jy sigma=0.842658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321453 Jy ! Component: 100 - total flux cleaned = 0.000424497 Jy ! Component: 150 - total flux cleaned = 0.00048881 Jy ! Component: 200 - total flux cleaned = 0.000504234 Jy ! Total flux subtracted in 200 components = 0.000504234 Jy ! Clean residual min=-0.001879 max=0.001885 Jy/beam ! Clean residual mean=-0.000000 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.201256 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.201256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055680Jy sigma=0.842508 ! Fit after self-cal, rms=0.055679Jy sigma=0.842503 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055679Jy sigma=0.842503 ! Fit after self-cal, rms=0.055707Jy sigma=0.842412 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.209 mas, bmaj=12.29 mas, bpa=-3.987 degrees ! Estimated noise=0.922359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259079 Jy ! Component: 100 - total flux cleaned = 0.000464119 Jy ! Component: 150 - total flux cleaned = 0.000600176 Jy ! Component: 200 - total flux cleaned = 0.000687589 Jy ! Total flux subtracted in 200 components = 0.000687589 Jy ! Clean residual min=-0.001868 max=0.001744 Jy/beam ! Clean residual mean=-0.000002 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.201943 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 149 components and 0.201943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055704Jy sigma=0.842325 ! Fit after self-cal, rms=0.055705Jy sigma=0.842315 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170266 Jy ! Component: 100 - total flux cleaned = 0.000287944 Jy ! Component: 150 - total flux cleaned = 0.00034656 Jy ! Component: 200 - total flux cleaned = 0.000393656 Jy ! Total flux subtracted in 200 components = 0.000393656 Jy ! Clean residual min=-0.001864 max=0.001736 Jy/beam ! Clean residual mean=-0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.202337 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 157 components and 0.202337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055704Jy sigma=0.842270 ! Fit after self-cal, rms=0.055704Jy sigma=0.842268 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=8.642 mas, bpa=12 degrees ! Estimated noise=0.786449 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.528 x 8.642 at 12 degrees (North through East) ! Clean map min=-0.0019022 max=0.16013 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=7.738 mas, bpa=17.28 degrees ! Estimated noise=1.16804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120741 Jy ! Component: 100 - total flux cleaned = 0.148243 Jy ! Component: 150 - total flux cleaned = 0.160521 Jy ! Component: 200 - total flux cleaned = 0.168278 Jy ! Total flux subtracted in 200 components = 0.168278 Jy ! Clean residual min=-0.004529 max=0.004304 Jy/beam ! Clean residual mean=0.000005 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.168278 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.168278 Jy ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=8.642 mas, bpa=12 degrees ! Estimated noise=0.786449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00904998 Jy ! Component: 100 - total flux cleaned = 0.0149113 Jy ! Component: 150 - total flux cleaned = 0.019051 Jy ! Component: 200 - total flux cleaned = 0.0221408 Jy ! Total flux subtracted in 200 components = 0.0221408 Jy ! Clean residual min=-0.002443 max=0.002292 Jy/beam ! Clean residual mean=0.000005 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.190419 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 74 components and 0.190419 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.209 mas, bmaj=12.29 mas, bpa=-3.987 degrees ! Estimated noise=0.922359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342738 Jy ! Component: 100 - total flux cleaned = 0.00548871 Jy ! Component: 150 - total flux cleaned = 0.00697328 Jy ! Component: 200 - total flux cleaned = 0.00809816 Jy ! Total flux subtracted in 200 components = 0.00809816 Jy ! Clean residual min=-0.002227 max=0.001771 Jy/beam ! Clean residual mean=0.000002 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.198517 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00087826 Jy ! Component: 100 - total flux cleaned = 0.00158627 Jy ! Component: 150 - total flux cleaned = 0.00199084 Jy ! Component: 200 - total flux cleaned = 0.00228367 Jy ! Total flux subtracted in 200 components = 0.00228367 Jy ! Clean residual min=-0.002033 max=0.001783 Jy/beam ! Clean residual mean=0.000000 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.200801 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 152 components and 0.200801 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.528 mas, bmaj=8.642 mas, bpa=12 degrees ! Estimated noise=0.786449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179236 Jy ! Component: 100 - total flux cleaned = 0.000323382 Jy ! Component: 150 - total flux cleaned = 0.000425917 Jy ! Component: 200 - total flux cleaned = 0.000541884 Jy ! Total flux subtracted in 200 components = 0.000541884 Jy ! Clean residual min=-0.001899 max=0.001892 Jy/beam ! Clean residual mean=-0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.201343 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 169 components and 0.201343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055731Jy sigma=0.842657 ! Fit after self-cal, rms=0.055728Jy sigma=0.842603 wmodel /scr/pima/rv100_uvs/J0049+0237_S_map.mod ! Writing 169 model components to file: /scr/pima/rv100_uvs/J0049+0237_S_map.mod wobs /scr/pima/rv100_uvs/J0049+0237_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J0049+0237_S_uvs.fits wwins /scr/pima/rv100_uvs/J0049+0237_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv100_uvs/J0049+0237_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.72078e-05 Jy ! Component: 100 - total flux cleaned = 1.6781e-07 Jy ! Component: 150 - total flux cleaned = -8.49468e-05 Jy ! Component: 200 - total flux cleaned = -0.000193795 Jy ! Component: 250 - total flux cleaned = -0.000297632 Jy ! Component: 300 - total flux cleaned = -0.000322735 Jy ! Component: 350 - total flux cleaned = -0.000394968 Jy ! Component: 400 - total flux cleaned = -0.000417661 Jy ! Component: 450 - total flux cleaned = -0.000485616 Jy ! Component: 500 - total flux cleaned = -0.000529793 Jy ! Component: 550 - total flux cleaned = -0.000508234 Jy ! Component: 600 - total flux cleaned = -0.000550509 Jy ! Component: 650 - total flux cleaned = -0.00063354 Jy ! Component: 700 - total flux cleaned = -0.000735116 Jy ! Component: 750 - total flux cleaned = -0.00089461 Jy ! Component: 800 - total flux cleaned = -0.000991674 Jy ! Component: 850 - total flux cleaned = -0.00106769 Jy ! Component: 900 - total flux cleaned = -0.0011422 Jy ! Component: 950 - total flux cleaned = -0.0011605 Jy ! Component: 1000 - total flux cleaned = -0.00119719 Jy ! Component: 1050 - total flux cleaned = -0.00133984 Jy ! Component: 1100 - total flux cleaned = -0.00139226 Jy ! Component: 1150 - total flux cleaned = -0.00149601 Jy ! Component: 1200 - total flux cleaned = -0.0016152 Jy ! Component: 1250 - total flux cleaned = -0.00171573 Jy ! Component: 1300 - total flux cleaned = -0.0018148 Jy ! Component: 1350 - total flux cleaned = -0.00192868 Jy ! Component: 1400 - total flux cleaned = -0.00200898 Jy ! Component: 1450 - total flux cleaned = -0.0021196 Jy ! Component: 1500 - total flux cleaned = -0.00224458 Jy ! Component: 1550 - total flux cleaned = -0.00230594 Jy ! Component: 1600 - total flux cleaned = -0.00239709 Jy ! Component: 1650 - total flux cleaned = -0.00245694 Jy ! Component: 1700 - total flux cleaned = -0.00256088 Jy ! Component: 1750 - total flux cleaned = -0.00263415 Jy ! Component: 1800 - total flux cleaned = -0.00267759 Jy ! Component: 1850 - total flux cleaned = -0.00274938 Jy ! Component: 1900 - total flux cleaned = -0.00280627 Jy ! Component: 1950 - total flux cleaned = -0.00286254 Jy ! Component: 2000 - total flux cleaned = -0.00295988 Jy ! Component: 2050 - total flux cleaned = -0.00300114 Jy ! Component: 2100 - total flux cleaned = -0.00305571 Jy ! Component: 2150 - total flux cleaned = -0.00310968 Jy ! Component: 2200 - total flux cleaned = -0.0031096 Jy ! Component: 2250 - total flux cleaned = -0.00314929 Jy ! Component: 2300 - total flux cleaned = -0.00322801 Jy ! Component: 2350 - total flux cleaned = -0.00325401 Jy ! Component: 2400 - total flux cleaned = -0.00330561 Jy ! Component: 2450 - total flux cleaned = -0.00335692 Jy ! Component: 2500 - total flux cleaned = -0.00334433 Jy ! Component: 2550 - total flux cleaned = -0.00342009 Jy ! Component: 2600 - total flux cleaned = -0.00349522 Jy ! Component: 2650 - total flux cleaned = -0.0035076 Jy ! Component: 2700 - total flux cleaned = -0.00355702 Jy ! Component: 2750 - total flux cleaned = -0.00361825 Jy ! Component: 2800 - total flux cleaned = -0.00370341 Jy ! Component: 2850 - total flux cleaned = -0.00371539 Jy ! Component: 2900 - total flux cleaned = -0.00377546 Jy ! Component: 2950 - total flux cleaned = -0.00379929 Jy ! Component: 3000 - total flux cleaned = -0.00383506 Jy ! Component: 3050 - total flux cleaned = -0.0039176 Jy ! Component: 3100 - total flux cleaned = -0.00399971 Jy ! Component: 3150 - total flux cleaned = -0.00401146 Jy ! Component: 3200 - total flux cleaned = -0.00412745 Jy ! Component: 3250 - total flux cleaned = -0.00418505 Jy ! Component: 3300 - total flux cleaned = -0.00424232 Jy ! Component: 3350 - total flux cleaned = -0.00433368 Jy ! Component: 3400 - total flux cleaned = -0.0043792 Jy ! Component: 3450 - total flux cleaned = -0.00446971 Jy ! Component: 3500 - total flux cleaned = -0.00452601 Jy ! Component: 3550 - total flux cleaned = -0.00460444 Jy ! Component: 3600 - total flux cleaned = -0.00467132 Jy ! Component: 3650 - total flux cleaned = -0.00474899 Jy ! Component: 3700 - total flux cleaned = -0.00478214 Jy ! Component: 3750 - total flux cleaned = -0.00484823 Jy ! Component: 3800 - total flux cleaned = -0.00490305 Jy ! Component: 3850 - total flux cleaned = -0.00496854 Jy ! Component: 3900 - total flux cleaned = -0.00501206 Jy ! Component: 3950 - total flux cleaned = -0.00504456 Jy ! Component: 4000 - total flux cleaned = -0.00510931 Jy ! Component: 4050 - total flux cleaned = -0.00515236 Jy ! Total flux subtracted in 4096 components = -0.00518448 Jy ! Clean residual min=-0.000675 max=0.000661 Jy/beam ! Clean residual mean=0.000000 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.196158 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 433 components and 0.196158 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J0049+0237_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.528 x 8.642 at 12 degrees (North through East) ! Clean map min=-0.0013761 max=0.15994 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0049+0237_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.159937 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194639 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.365093 0.365093 0.730186 1.46037 2.92074 5.84149 11.683 23.3659 46.7319 93.4638 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.159 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 821.708 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J0049+0237_S_uvs.log closed on Mon Feb 29 13:24:31 2016