! Started logfile: /scr/pima/rv100_uvs/J0040-0146_X_uvs.log on Mon Feb 29 13:24:13 2016 obs /scr/pima/rv100_uvs/J0040-0146_X_uva.fits ! Reading UV FITS file: /scr/pima/rv100_uvs/J0040-0146_X_uva.fits ! AN table 1: 36 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0040-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 4032 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rv100_uvs/J0040-0146_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.077629Jy sigma=17.536828 ! Fit after self-cal, rms=0.631196Jy sigma=10.207460 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.68 mas, bmaj=1.801 mas, bpa=-5.39 degrees ! Estimated noise=1.23225 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273872 Jy ! Component: 100 - total flux cleaned = 0.348231 Jy ! Total flux subtracted in 100 components = 0.348231 Jy ! Clean residual min=-0.025091 max=0.056043 Jy/beam ! Clean residual mean=0.000033 rms=0.006519 Jy/beam ! Combined flux in latest and established models = 0.348231 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.348231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134158Jy sigma=2.206680 ! Fit after self-cal, rms=0.134096Jy sigma=2.205432 ! Inverting map ! Added new window around map position (-2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551985 Jy ! Component: 100 - total flux cleaned = 0.0906215 Jy ! Total flux subtracted in 100 components = 0.0906215 Jy ! Clean residual min=-0.016974 max=0.022299 Jy/beam ! Clean residual mean=0.000020 rms=0.003983 Jy/beam ! Combined flux in latest and established models = 0.438853 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 0.438853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093807Jy sigma=1.521495 ! Fit after self-cal, rms=0.091600Jy sigma=1.484381 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286343 Jy ! Component: 100 - total flux cleaned = 0.0487018 Jy ! Total flux subtracted in 100 components = 0.0487018 Jy ! Clean residual min=-0.011002 max=0.014300 Jy/beam ! Clean residual mean=0.000012 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.487555 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.487555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074649Jy sigma=1.186824 ! Fit after self-cal, rms=0.074052Jy sigma=1.176826 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8217 mas, bmaj=2.211 mas, bpa=-7.94 degrees ! Estimated noise=0.725908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0285019 Jy ! Component: 100 - total flux cleaned = 0.0467533 Jy ! Component: 150 - total flux cleaned = 0.0594775 Jy ! Component: 200 - total flux cleaned = 0.0687431 Jy ! Total flux subtracted in 200 components = 0.0687431 Jy ! Clean residual min=-0.007643 max=0.010300 Jy/beam ! Clean residual mean=0.000012 rms=0.001908 Jy/beam ! Combined flux in latest and established models = 0.556298 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 62 components and 0.556298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060621Jy sigma=0.930180 ! Fit after self-cal, rms=0.060074Jy sigma=0.920772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8217 x 2.211 at -7.94 degrees (North through East) ! Clean map min=-0.0061171 max=0.36757 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 1.03 KP 0.96 LA 0.98 MK 1.02 ! NL 1.00 OV 1.04 PT 0.95 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.97 LA 0.98 MK 1.00 ! NL 1.01 OV 1.05 PT 0.95 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 1.02 KP 0.98 LA 0.99 MK 1.00 ! NL 1.01 OV 1.02 PT 0.95 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HN 1.04 KP 0.97 LA 1.00 MK 1.01 ! NL 1.00 OV 1.02 PT 0.95 SC 1.00 ! ! ! Fit before self-cal, rms=0.060074Jy sigma=0.920772 ! Fit after self-cal, rms=0.057466Jy sigma=0.874307 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.826 mas, bmaj=2.215 mas, bpa=-7.791 degrees ! Estimated noise=0.72004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533949 Jy ! Component: 100 - total flux cleaned = 0.00797067 Jy ! Component: 150 - total flux cleaned = 0.00871587 Jy ! Component: 200 - total flux cleaned = 0.00919577 Jy ! Total flux subtracted in 200 components = 0.00919577 Jy ! Clean residual min=-0.003244 max=0.004042 Jy/beam ! Clean residual mean=-0.000004 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.565493 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 86 components and 0.565493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056849Jy sigma=0.865136 ! Fit after self-cal, rms=0.056815Jy sigma=0.864313 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056815Jy sigma=0.864313 ! Fit after self-cal, rms=0.056599Jy sigma=0.856251 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=2.215 mas, bpa=-7.782 degrees ! Estimated noise=0.720334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276656 Jy ! Component: 100 - total flux cleaned = 0.00327591 Jy ! Component: 150 - total flux cleaned = 0.00374605 Jy ! Component: 200 - total flux cleaned = 0.00390127 Jy ! Total flux subtracted in 200 components = 0.00390127 Jy ! Clean residual min=-0.003351 max=0.003169 Jy/beam ! Clean residual mean=-0.000004 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.569395 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.569395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056414Jy sigma=0.853284 ! Fit after self-cal, rms=0.056406Jy sigma=0.853143 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050317 Jy ! Component: 100 - total flux cleaned = 0.000549916 Jy ! Component: 150 - total flux cleaned = 0.000636879 Jy ! Component: 200 - total flux cleaned = 0.000718503 Jy ! Total flux subtracted in 200 components = 0.000718503 Jy ! Clean residual min=-0.003188 max=0.002993 Jy/beam ! Clean residual mean=-0.000004 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.570113 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 0.570113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056338Jy sigma=0.852175 ! Fit after self-cal, rms=0.056334Jy sigma=0.852146 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056334Jy sigma=0.852146 ! Fit after self-cal, rms=0.056283Jy sigma=0.851769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8246 mas, bmaj=2.213 mas, bpa=-7.771 degrees ! Estimated noise=0.719785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119246 Jy ! Component: 100 - total flux cleaned = 0.00148168 Jy ! Component: 150 - total flux cleaned = 0.00159336 Jy ! Component: 200 - total flux cleaned = 0.00169583 Jy ! Total flux subtracted in 200 components = 0.00169583 Jy ! Clean residual min=-0.003050 max=0.002812 Jy/beam ! Clean residual mean=-0.000003 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.571809 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.571809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056228Jy sigma=0.850901 ! Fit after self-cal, rms=0.056225Jy sigma=0.850867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216349 Jy ! Component: 100 - total flux cleaned = 0.000278687 Jy ! Component: 150 - total flux cleaned = 0.000366869 Jy ! Component: 200 - total flux cleaned = 0.000422093 Jy ! Total flux subtracted in 200 components = 0.000422093 Jy ! Clean residual min=-0.002970 max=0.002730 Jy/beam ! Clean residual mean=-0.000003 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.572231 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.572231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056195Jy sigma=0.850412 ! Fit after self-cal, rms=0.056193Jy sigma=0.850397 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056193Jy sigma=0.850397 ! Fit after self-cal, rms=0.056165Jy sigma=0.850286 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2 mas, bmaj=4.499 mas, bpa=-12.12 degrees ! Estimated noise=0.948539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138912 Jy ! Component: 100 - total flux cleaned = 0.00154173 Jy ! Component: 150 - total flux cleaned = 0.0016068 Jy ! Component: 200 - total flux cleaned = 0.00157992 Jy ! Total flux subtracted in 200 components = 0.00157992 Jy ! Clean residual min=-0.003406 max=0.003535 Jy/beam ! Clean residual mean=-0.000007 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.573811 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 147 components and 0.573811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056157Jy sigma=0.850028 ! Fit after self-cal, rms=0.056153Jy sigma=0.849961 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292597 Jy ! Component: 100 - total flux cleaned = 0.000401715 Jy ! Component: 150 - total flux cleaned = 0.000426131 Jy ! Component: 200 - total flux cleaned = 0.000425635 Jy ! Total flux subtracted in 200 components = 0.000425635 Jy ! Clean residual min=-0.003355 max=0.003398 Jy/beam ! Clean residual mean=-0.000007 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.574237 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 156 components and 0.574236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056152Jy sigma=0.849846 ! Fit after self-cal, rms=0.056149Jy sigma=0.849822 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=2.212 mas, bpa=-7.763 degrees ! Estimated noise=0.719503 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8242 x 2.212 at -7.763 degrees (North through East) ! Clean map min=-0.0026581 max=0.36212 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6813 mas, bmaj=1.801 mas, bpa=-5.223 degrees ! Estimated noise=1.22591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.271768 Jy ! Component: 100 - total flux cleaned = 0.354364 Jy ! Component: 150 - total flux cleaned = 0.40774 Jy ! Component: 200 - total flux cleaned = 0.444172 Jy ! Total flux subtracted in 200 components = 0.444172 Jy ! Clean residual min=-0.011494 max=0.019962 Jy/beam ! Clean residual mean=0.000015 rms=0.003263 Jy/beam ! Combined flux in latest and established models = 0.444172 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.444172 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=2.212 mas, bpa=-7.763 degrees ! Estimated noise=0.719503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401253 Jy ! Component: 100 - total flux cleaned = 0.065043 Jy ! Component: 150 - total flux cleaned = 0.0816198 Jy ! Component: 200 - total flux cleaned = 0.0931307 Jy ! Total flux subtracted in 200 components = 0.0931307 Jy ! Clean residual min=-0.005939 max=0.008626 Jy/beam ! Clean residual mean=0.000010 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.537302 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 65 components and 0.537302 Jy ! Inverting map ! Added new window around map position (-3.2, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00899923 Jy ! Component: 100 - total flux cleaned = 0.0151586 Jy ! Component: 150 - total flux cleaned = 0.019674 Jy ! Component: 200 - total flux cleaned = 0.0231577 Jy ! Total flux subtracted in 200 components = 0.0231577 Jy ! Clean residual min=-0.004206 max=0.003154 Jy/beam ! Clean residual mean=0.000002 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.56046 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 95 components and 0.56046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2 mas, bmaj=4.499 mas, bpa=-12.12 degrees ! Estimated noise=0.948539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488476 Jy ! Component: 100 - total flux cleaned = 0.00788619 Jy ! Component: 150 - total flux cleaned = 0.00990076 Jy ! Component: 200 - total flux cleaned = 0.0113093 Jy ! Total flux subtracted in 200 components = 0.0113093 Jy ! Clean residual min=-0.003587 max=0.003065 Jy/beam ! Clean residual mean=-0.000005 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.571769 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100176 Jy ! Component: 100 - total flux cleaned = 0.00151386 Jy ! Component: 150 - total flux cleaned = 0.0017146 Jy ! Component: 200 - total flux cleaned = 0.00187223 Jy ! Total flux subtracted in 200 components = 0.00187223 Jy ! Clean residual min=-0.003307 max=0.003037 Jy/beam ! Clean residual mean=-0.000006 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.573642 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 129 components and 0.573642 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8242 mas, bmaj=2.212 mas, bpa=-7.763 degrees ! Estimated noise=0.719503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.44613e-05 Jy ! Component: 100 - total flux cleaned = 0.000179398 Jy ! Component: 150 - total flux cleaned = 0.000215991 Jy ! Component: 200 - total flux cleaned = 0.000247596 Jy ! Total flux subtracted in 200 components = 0.000247596 Jy ! Clean residual min=-0.003100 max=0.002570 Jy/beam ! Clean residual mean=-0.000003 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.573889 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 144 components and 0.573889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056120Jy sigma=0.849323 ! Fit after self-cal, rms=0.056095Jy sigma=0.848972 wmodel /scr/pima/rv100_uvs/J0040-0146_X_map.mod ! Writing 144 model components to file: /scr/pima/rv100_uvs/J0040-0146_X_map.mod wobs /scr/pima/rv100_uvs/J0040-0146_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv100_uvs/J0040-0146_X_uvs.fits wwins /scr/pima/rv100_uvs/J0040-0146_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rv100_uvs/J0040-0146_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214582 Jy ! Component: 100 - total flux cleaned = 0.000184927 Jy ! Component: 150 - total flux cleaned = 0.000144168 Jy ! Component: 200 - total flux cleaned = 0.000336287 Jy ! Component: 250 - total flux cleaned = 0.000448102 Jy ! Component: 300 - total flux cleaned = 0.000447845 Jy ! Component: 350 - total flux cleaned = 0.00041261 Jy ! Component: 400 - total flux cleaned = 0.000279253 Jy ! Component: 450 - total flux cleaned = 0.000279805 Jy ! Component: 500 - total flux cleaned = 0.000121244 Jy ! Component: 550 - total flux cleaned = -1.80908e-06 Jy ! Component: 600 - total flux cleaned = -3.20166e-05 Jy ! Component: 650 - total flux cleaned = -0.000269279 Jy ! Component: 700 - total flux cleaned = -0.000500334 Jy ! Component: 750 - total flux cleaned = -0.000670575 Jy ! Component: 800 - total flux cleaned = -0.000892566 Jy ! Component: 850 - total flux cleaned = -0.00108358 Jy ! Component: 900 - total flux cleaned = -0.00129806 Jy ! Component: 950 - total flux cleaned = -0.00148289 Jy ! Component: 1000 - total flux cleaned = -0.00163837 Jy ! Component: 1050 - total flux cleaned = -0.00176559 Jy ! Component: 1100 - total flux cleaned = -0.00191577 Jy ! Component: 1150 - total flux cleaned = -0.00198939 Jy ! Component: 1200 - total flux cleaned = -0.00213487 Jy ! Component: 1250 - total flux cleaned = -0.00227839 Jy ! Component: 1300 - total flux cleaned = -0.00239572 Jy ! Component: 1350 - total flux cleaned = -0.00255771 Jy ! Component: 1400 - total flux cleaned = -0.00269491 Jy ! Component: 1450 - total flux cleaned = -0.00283049 Jy ! Component: 1500 - total flux cleaned = -0.00298656 Jy ! Component: 1550 - total flux cleaned = -0.00314066 Jy ! Component: 1600 - total flux cleaned = -0.00329268 Jy ! Component: 1650 - total flux cleaned = -0.00339998 Jy ! Component: 1700 - total flux cleaned = -0.00348485 Jy ! Component: 1750 - total flux cleaned = -0.00356821 Jy ! Component: 1800 - total flux cleaned = -0.00356827 Jy ! Component: 1850 - total flux cleaned = -0.00371183 Jy ! Component: 1900 - total flux cleaned = -0.00371175 Jy ! Component: 1950 - total flux cleaned = -0.00377201 Jy ! Component: 2000 - total flux cleaned = -0.00379201 Jy ! Component: 2050 - total flux cleaned = -0.00383113 Jy ! Component: 2100 - total flux cleaned = -0.00383114 Jy ! Component: 2150 - total flux cleaned = -0.003889 Jy ! Component: 2200 - total flux cleaned = -0.00394588 Jy ! Component: 2250 - total flux cleaned = -0.0039834 Jy ! Component: 2300 - total flux cleaned = -0.00396456 Jy ! Component: 2350 - total flux cleaned = -0.00405743 Jy ! Component: 2400 - total flux cleaned = -0.00413066 Jy ! Component: 2450 - total flux cleaned = -0.00414884 Jy ! Component: 2500 - total flux cleaned = -0.00414884 Jy ! Component: 2550 - total flux cleaned = -0.0042025 Jy ! Component: 2600 - total flux cleaned = -0.00420272 Jy ! Component: 2650 - total flux cleaned = -0.00432521 Jy ! Component: 2700 - total flux cleaned = -0.00441208 Jy ! Component: 2750 - total flux cleaned = -0.00446358 Jy ! Component: 2800 - total flux cleaned = -0.00449755 Jy ! Component: 2850 - total flux cleaned = -0.00449749 Jy ! Component: 2900 - total flux cleaned = -0.00456473 Jy ! Component: 2950 - total flux cleaned = -0.00463128 Jy ! Component: 3000 - total flux cleaned = -0.00456516 Jy ! Component: 3050 - total flux cleaned = -0.0046145 Jy ! Component: 3100 - total flux cleaned = -0.00469577 Jy ! Component: 3150 - total flux cleaned = -0.00467971 Jy ! Component: 3200 - total flux cleaned = -0.00472786 Jy ! Component: 3250 - total flux cleaned = -0.00472784 Jy ! Component: 3300 - total flux cleaned = -0.00479114 Jy ! Component: 3350 - total flux cleaned = -0.00477534 Jy ! Component: 3400 - total flux cleaned = -0.0048379 Jy ! Component: 3450 - total flux cleaned = -0.00485328 Jy ! Component: 3500 - total flux cleaned = -0.00493014 Jy ! Component: 3550 - total flux cleaned = -0.00493001 Jy ! Component: 3600 - total flux cleaned = -0.00489972 Jy ! Component: 3650 - total flux cleaned = -0.00496012 Jy ! Component: 3700 - total flux cleaned = -0.00494498 Jy ! Component: 3750 - total flux cleaned = -0.00492995 Jy ! Component: 3800 - total flux cleaned = -0.00490022 Jy ! Component: 3850 - total flux cleaned = -0.00491513 Jy ! Component: 3900 - total flux cleaned = -0.00498857 Jy ! Component: 3950 - total flux cleaned = -0.00501775 Jy ! Component: 4000 - total flux cleaned = -0.00490156 Jy ! Component: 4050 - total flux cleaned = -0.00493037 Jy ! Total flux subtracted in 4096 components = -0.00490173 Jy ! Clean residual min=-0.000993 max=0.000877 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.568988 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 445 components and 0.568988 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rv100_uvs/J0040-0146_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8242 x 2.212 at -7.763 degrees (North through East) ! Clean map min=-0.0020007 max=0.36422 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv100_uvs/J0040-0146_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.364224 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241165 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.19864 0.19864 0.39728 0.794561 1.58912 3.17824 6.35648 12.713 25.4259 50.8519 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.364 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1510.27 quit ! Quitting program ! Log file /scr/pima/rv100_uvs/J0040-0146_X_uvs.log closed on Mon Feb 29 13:24:18 2016