! Started logfile: J1543-0757_X_2013_01_09_pus_uvs.log on Mon Nov 3 15:55:02 2014 obs J1543-0757_X_2013_01_09_pus_uva.fits ! Reading UV FITS file: J1543-0757_X_2013_01_09_pus_uva.fits ! AN table 1: 176 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.349953 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1543-0757 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2998 lines of history. ! ! Reading 29564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 256 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1543-0757_X_2013_01_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 256x256 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1215 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937262Jy sigma=0.010264 ! Fit after self-cal, rms=0.901291Jy sigma=0.009890 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6915 mas, bmaj=1.723 mas, bpa=-0.6921 degrees ! Estimated noise=603.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0754579 Jy ! Component: 100 - total flux cleaned = 0.114699 Jy ! Total flux subtracted in 100 components = 0.114699 Jy ! Clean residual min=-0.011316 max=0.030147 Jy/beam ! Clean residual mean=0.002194 rms=0.007034 Jy/beam ! Combined flux in latest and established models = 0.114699 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.114699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174164Jy sigma=0.001882 ! Fit after self-cal, rms=0.173619Jy sigma=0.001876 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8367 mas, bmaj=2.017 mas, bpa=-3.174 degrees ! Estimated noise=387.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499814 Jy ! Component: 100 - total flux cleaned = 0.0806861 Jy ! Component: 150 - total flux cleaned = 0.100129 Jy ! Component: 200 - total flux cleaned = 0.112453 Jy ! Total flux subtracted in 200 components = 0.112453 Jy ! Clean residual min=-0.019131 max=0.040860 Jy/beam ! Clean residual mean=0.004106 rms=0.010779 Jy/beam ! Combined flux in latest and established models = 0.227152 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.227152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157582Jy sigma=0.001692 ! Fit after self-cal, rms=0.156861Jy sigma=0.001681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.01 HH 1.00* HN 2.75 ! KP 0.76 LA 0.69 MC 1.00* MK 1.16 ! NL 2.02 NY 1.00* OV 1.40 PT 0.65 ! SC 1.41 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.02 HH 1.00* HN 2.93 ! KP 0.74 LA 0.71 MC 1.00* MK 1.25 ! NL 2.59 NY 1.00* OV 1.50 PT 0.69 ! SC 1.64 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 0.98 HH 1.00* HN 2.09 ! KP 0.71 LA 0.70 MC 1.00* MK 1.09 ! NL 2.68 NY 1.00* OV 1.68 PT 0.63 ! SC 1.25 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 1.04 HH 1.00* HN 2.18 ! KP 0.76 LA 0.76 MC 1.00* MK 0.93 ! NL 2.79 NY 1.00* OV 1.71 PT 0.70 ! SC 1.52 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.156861Jy sigma=0.001681 ! Fit after self-cal, rms=0.269328Jy sigma=0.001415 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9179 mas, bmaj=2.233 mas, bpa=-4.081 degrees ! Estimated noise=475.391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241535 Jy ! Component: 100 - total flux cleaned = 0.00256401 Jy ! Component: 150 - total flux cleaned = 0.00270678 Jy ! Component: 200 - total flux cleaned = 0.00284622 Jy ! Total flux subtracted in 200 components = 0.00284622 Jy ! Clean residual min=-0.014990 max=0.019638 Jy/beam ! Clean residual mean=0.000723 rms=0.005363 Jy/beam ! Combined flux in latest and established models = 0.229998 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.229998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268922Jy sigma=0.001415 ! Fit after self-cal, rms=0.275842Jy sigma=0.001400 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275842Jy sigma=0.001400 ! Fit after self-cal, rms=0.310861Jy sigma=0.001374 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8354 mas, bmaj=2.275 mas, bpa=-6.354 degrees ! Estimated noise=441.213 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254642 Jy ! Component: 100 - total flux cleaned = 0.00306361 Jy ! Component: 150 - total flux cleaned = 0.00314027 Jy ! Component: 200 - total flux cleaned = 0.00321218 Jy ! Total flux subtracted in 200 components = 0.00321218 Jy ! Clean residual min=-0.010079 max=0.015123 Jy/beam ! Clean residual mean=0.000576 rms=0.004424 Jy/beam ! Combined flux in latest and established models = 0.233211 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.233211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310706Jy sigma=0.001374 ! Fit after self-cal, rms=0.311589Jy sigma=0.001372 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156522 Jy ! Component: 100 - total flux cleaned = -0.000157541 Jy ! Component: 150 - total flux cleaned = -0.000232582 Jy ! Component: 200 - total flux cleaned = -0.000299582 Jy ! Total flux subtracted in 200 components = -0.000299582 Jy ! Clean residual min=-0.010420 max=0.014671 Jy/beam ! Clean residual mean=0.000588 rms=0.004394 Jy/beam ! Combined flux in latest and established models = 0.232911 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.232911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311516Jy sigma=0.001372 ! Fit after self-cal, rms=0.311465Jy sigma=0.001372 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311465Jy sigma=0.001372 ! Fit after self-cal, rms=0.318642Jy sigma=0.001371 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8262 mas, bmaj=2.279 mas, bpa=-6.432 degrees ! Estimated noise=438.264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235804 Jy ! Component: 100 - total flux cleaned = 0.00277919 Jy ! Component: 150 - total flux cleaned = 0.00285502 Jy ! Component: 200 - total flux cleaned = 0.00285511 Jy ! Total flux subtracted in 200 components = 0.00285511 Jy ! Clean residual min=-0.009876 max=0.014662 Jy/beam ! Clean residual mean=0.000581 rms=0.004353 Jy/beam ! Combined flux in latest and established models = 0.235766 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.235766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318502Jy sigma=0.001371 ! Fit after self-cal, rms=0.318528Jy sigma=0.001371 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026179 Jy ! Component: 100 - total flux cleaned = 0.000262891 Jy ! Component: 150 - total flux cleaned = 0.00026076 Jy ! Component: 200 - total flux cleaned = 0.000259359 Jy ! Total flux subtracted in 200 components = 0.000259359 Jy ! Clean residual min=-0.010163 max=0.014642 Jy/beam ! Clean residual mean=0.000570 rms=0.004347 Jy/beam ! Combined flux in latest and established models = 0.236025 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.236025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318455Jy sigma=0.001370 ! Fit after self-cal, rms=0.318402Jy sigma=0.001370 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318402Jy sigma=0.001370 ! Fit after self-cal, rms=0.322501Jy sigma=0.001370 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=4.365 mas, bpa=1.34 degrees ! Estimated noise=531.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620338 Jy ! Component: 100 - total flux cleaned = 0.00664007 Jy ! Component: 150 - total flux cleaned = 0.00654583 Jy ! Component: 200 - total flux cleaned = 0.00645303 Jy ! Total flux subtracted in 200 components = 0.00645303 Jy ! Clean residual min=-0.017638 max=0.025349 Jy/beam ! Clean residual mean=0.000972 rms=0.007990 Jy/beam ! Combined flux in latest and established models = 0.242479 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.242479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322304Jy sigma=0.001371 ! Fit after self-cal, rms=0.322245Jy sigma=0.001370 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.55663e-05 Jy ! Component: 100 - total flux cleaned = -0.000106606 Jy ! Component: 150 - total flux cleaned = -0.000196489 Jy ! Component: 200 - total flux cleaned = -0.000281179 Jy ! Total flux subtracted in 200 components = -0.000281179 Jy ! Clean residual min=-0.017846 max=0.025262 Jy/beam ! Clean residual mean=0.000984 rms=0.007970 Jy/beam ! Combined flux in latest and established models = 0.242197 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.242197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322193Jy sigma=0.001370 ! Fit after self-cal, rms=0.322128Jy sigma=0.001370 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.276 mas, bpa=-6.301 degrees ! Estimated noise=442.561 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8259 x 2.276 at -6.301 degrees (North through East) ! Clean map min=-0.010717 max=0.090684 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6815 mas, bmaj=1.914 mas, bpa=-3.284 degrees ! Estimated noise=754.118 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.091612 Jy ! Component: 100 - total flux cleaned = 0.143203 Jy ! Component: 150 - total flux cleaned = 0.175987 Jy ! Component: 200 - total flux cleaned = 0.19781 Jy ! Total flux subtracted in 200 components = 0.19781 Jy ! Clean residual min=-0.010133 max=0.019253 Jy/beam ! Clean residual mean=0.000830 rms=0.004205 Jy/beam ! Combined flux in latest and established models = 0.19781 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.19781 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.276 mas, bpa=-6.301 degrees ! Estimated noise=442.561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181995 Jy ! Component: 100 - total flux cleaned = 0.028209 Jy ! Component: 150 - total flux cleaned = 0.0338454 Jy ! Component: 200 - total flux cleaned = 0.0350667 Jy ! Total flux subtracted in 200 components = 0.0350667 Jy ! Clean residual min=-0.010416 max=0.015644 Jy/beam ! Clean residual mean=0.000758 rms=0.004529 Jy/beam ! Combined flux in latest and established models = 0.232876 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.232876 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.559 mas, bmaj=4.365 mas, bpa=1.34 degrees ! Estimated noise=531.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00650253 Jy ! Component: 100 - total flux cleaned = 0.00663862 Jy ! Component: 150 - total flux cleaned = 0.00675628 Jy ! Component: 200 - total flux cleaned = 0.00664765 Jy ! Total flux subtracted in 200 components = 0.00664765 Jy ! Clean residual min=-0.017150 max=0.025695 Jy/beam ! Clean residual mean=0.001141 rms=0.008014 Jy/beam ! Combined flux in latest and established models = 0.239524 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103077 Jy ! Component: 100 - total flux cleaned = -0.000197874 Jy ! Component: 150 - total flux cleaned = -0.000293233 Jy ! Component: 200 - total flux cleaned = -0.000298981 Jy ! Total flux subtracted in 200 components = -0.000298981 Jy ! Clean residual min=-0.017363 max=0.025715 Jy/beam ! Clean residual mean=0.001156 rms=0.007995 Jy/beam ! Combined flux in latest and established models = 0.239225 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.239225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8259 mas, bmaj=2.276 mas, bpa=-6.301 degrees ! Estimated noise=442.561 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00489115 Jy ! Component: 100 - total flux cleaned = -0.00527515 Jy ! Component: 150 - total flux cleaned = -0.00518182 Jy ! Component: 200 - total flux cleaned = -0.00499814 Jy ! Total flux subtracted in 200 components = -0.00499814 Jy ! Clean residual min=-0.009789 max=0.015347 Jy/beam ! Clean residual mean=0.000712 rms=0.004461 Jy/beam ! Combined flux in latest and established models = 0.234227 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.234227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322421Jy sigma=0.001374 ! Fit after self-cal, rms=0.322529Jy sigma=0.001371 wmodel J1543-0757_X_2013_01_09_pus_map.mod ! Writing 50 model components to file: J1543-0757_X_2013_01_09_pus_map.mod wobs J1543-0757_X_2013_01_09_pus_uvs.fits ! Writing UV FITS file: J1543-0757_X_2013_01_09_pus_uvs.fits wwins J1543-0757_X_2013_01_09_pus_map.win ! wwins: Wrote 1 windows to J1543-0757_X_2013_01_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=1024 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667476 Jy ! Component: 100 - total flux cleaned = 0.0125486 Jy ! Component: 150 - total flux cleaned = 0.0176697 Jy ! Component: 200 - total flux cleaned = 0.0206496 Jy ! Component: 250 - total flux cleaned = 0.0230863 Jy ! Component: 300 - total flux cleaned = 0.025775 Jy ! Component: 350 - total flux cleaned = 0.0278384 Jy ! Component: 400 - total flux cleaned = 0.0294976 Jy ! Component: 450 - total flux cleaned = 0.0310966 Jy ! Component: 500 - total flux cleaned = 0.0324866 Jy ! Component: 550 - total flux cleaned = 0.0338368 Jy ! Component: 600 - total flux cleaned = 0.0350052 Jy ! Component: 650 - total flux cleaned = 0.0355751 Jy ! Component: 700 - total flux cleaned = 0.0362708 Jy ! Component: 750 - total flux cleaned = 0.0372193 Jy ! Component: 800 - total flux cleaned = 0.0374838 Jy ! Component: 850 - total flux cleaned = 0.0380044 Jy ! Component: 900 - total flux cleaned = 0.0383867 Jy ! Component: 950 - total flux cleaned = 0.0388887 Jy ! Component: 1000 - total flux cleaned = 0.0391339 Jy ! Total flux subtracted in 1024 components = 0.0393765 Jy ! Clean residual min=-0.006402 max=0.006261 Jy/beam ! Clean residual mean=0.000016 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.273603 Jy keep ! Adding 95 model components to the UV plane model. ! The established model now contains 145 components and 0.273603 Jy ![Exited script file: muppet] wmap "J1543-0757_X_2013_01_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8259 x 2.276 at -6.301 degrees (North through East) ! Clean map min=-0.01014 max=0.095934 Jy/beam ! Writing clean map to FITS file: J1543-0757_X_2013_01_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0959337 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00304595 device "J1543-0757_X_2013_01_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1543-0757_X_2013_01_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -9.52518 9.52518 19.0504 38.1007 76.2015 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0091 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8259 x 2.276 at -6.301 degrees (North through East) ! Clean map min=-0.01014 max=0.095934 Jy/beam quit ! Quitting program ! Log file J1543-0757_X_2013_01_09_pus_uvs.log closed on Mon Nov 3 15:55:05 2014