! Started logfile: J1018-3144_S_2013_01_09_pus_uvs.log on Tue Nov 4 19:00:55 2014 obs J1018-3144_S_2013_01_09_pus_uva.fits ! Reading UV FITS file: J1018-3144_S_2013_01_09_pus_uva.fits ! AN table 1: 176 integrations on 120 of 120 possible baselines. ! Apparent sampling: 0.266998 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1018-3144 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3255 lines of history. ! ! Reading 22556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1018-3144_S_2013_01_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1322 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.863784Jy sigma=0.007916 ! Fit after self-cal, rms=0.809344Jy sigma=0.007327 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=8.123 mas, bpa=-2.995 degrees ! Estimated noise=1099.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143863 Jy ! Component: 100 - total flux cleaned = 0.226031 Jy ! Total flux subtracted in 100 components = 0.226031 Jy ! Clean residual min=-0.035927 max=0.061219 Jy/beam ! Clean residual mean=-0.002281 rms=0.014715 Jy/beam ! Combined flux in latest and established models = 0.226031 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.226031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287703Jy sigma=0.002859 ! Fit after self-cal, rms=0.286894Jy sigma=0.002855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=12.53 mas, bpa=-8.405 degrees ! Estimated noise=506.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128909 Jy ! Component: 100 - total flux cleaned = 0.193227 Jy ! Component: 150 - total flux cleaned = 0.226007 Jy ! Component: 200 - total flux cleaned = 0.241262 Jy ! Total flux subtracted in 200 components = 0.241262 Jy ! Clean residual min=-0.052889 max=0.082293 Jy/beam ! Clean residual mean=-0.002448 rms=0.020640 Jy/beam ! Combined flux in latest and established models = 0.467293 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.467293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236574Jy sigma=0.002249 ! Fit after self-cal, rms=0.235184Jy sigma=0.002242 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.09 HH 1.00* HN 2.18 ! KP 0.84 LA 1.07 MC 1.00* MK 1.19 ! NL 1.58 NY 1.00* OV 0.99 PT 0.78 ! SC 1.31 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.20 HH 1.00* HN 2.18 ! KP 0.85 LA 1.02 MC 1.00* MK 1.45 ! NL 1.75 NY 1.00* OV 1.09 PT 0.75 ! SC 1.44 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.24 HH 1.00* HN 2.08 ! KP 0.71 LA 1.04 MC 1.00* MK 1.64 ! NL 1.79 NY 1.00* OV 1.09 PT 0.76 ! SC 1.47 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.27 HH 1.00* HN 1.67 ! KP 0.69 LA 0.87 MC 1.00* MK 1.71 ! NL 1.63 NY 1.00* OV 0.95 PT 0.69 ! SC 1.35 TS 1.00* WF 1.00* WZ 1.00* ! ! ! Fit before self-cal, rms=0.235184Jy sigma=0.002242 ! Fit after self-cal, rms=0.296079Jy sigma=0.001975 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.261 mas, bmaj=14.08 mas, bpa=-7.561 degrees ! Estimated noise=610.176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477269 Jy ! Component: 100 - total flux cleaned = 0.00497975 Jy ! Component: 150 - total flux cleaned = 0.00497685 Jy ! Component: 200 - total flux cleaned = 0.00482 Jy ! Total flux subtracted in 200 components = 0.00482 Jy ! Clean residual min=-0.045837 max=0.065549 Jy/beam ! Clean residual mean=-0.002543 rms=0.020231 Jy/beam ! Combined flux in latest and established models = 0.472113 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.472113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295675Jy sigma=0.001974 ! Fit after self-cal, rms=0.301331Jy sigma=0.001958 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301331Jy sigma=0.001958 ! Fit after self-cal, rms=0.308934Jy sigma=0.001957 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=14.06 mas, bpa=-7.291 degrees ! Estimated noise=617.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337491 Jy ! Component: 100 - total flux cleaned = 0.00409555 Jy ! Component: 150 - total flux cleaned = 0.00445887 Jy ! Component: 200 - total flux cleaned = 0.00475477 Jy ! Total flux subtracted in 200 components = 0.00475477 Jy ! Clean residual min=-0.043207 max=0.064125 Jy/beam ! Clean residual mean=-0.002547 rms=0.019773 Jy/beam ! Combined flux in latest and established models = 0.476868 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.476868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308472Jy sigma=0.001955 ! Fit after self-cal, rms=0.309415Jy sigma=0.001954 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117123 Jy ! Component: 100 - total flux cleaned = -0.000812344 Jy ! Component: 150 - total flux cleaned = -0.000519677 Jy ! Component: 200 - total flux cleaned = -0.000394196 Jy ! Total flux subtracted in 200 components = -0.000394196 Jy ! Clean residual min=-0.043023 max=0.063998 Jy/beam ! Clean residual mean=-0.002544 rms=0.019727 Jy/beam ! Combined flux in latest and established models = 0.476474 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.476474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309178Jy sigma=0.001953 ! Fit after self-cal, rms=0.309723Jy sigma=0.001952 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309723Jy sigma=0.001952 ! Fit after self-cal, rms=0.322534Jy sigma=0.001897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.33 mas, bmaj=14.6 mas, bpa=-8.078 degrees ! Estimated noise=627.384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190167 Jy ! Component: 100 - total flux cleaned = 0.00234454 Jy ! Component: 150 - total flux cleaned = 0.00258554 Jy ! Component: 200 - total flux cleaned = 0.00269445 Jy ! Total flux subtracted in 200 components = 0.00269445 Jy ! Clean residual min=-0.043576 max=0.061058 Jy/beam ! Clean residual mean=-0.002589 rms=0.019334 Jy/beam ! Combined flux in latest and established models = 0.479168 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.479168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322326Jy sigma=0.001897 ! Fit after self-cal, rms=0.322544Jy sigma=0.001896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408201 Jy ! Component: 100 - total flux cleaned = -0.000176728 Jy ! Component: 150 - total flux cleaned = -7.35853e-05 Jy ! Component: 200 - total flux cleaned = 1.93465e-05 Jy ! Total flux subtracted in 200 components = 1.93465e-05 Jy ! Clean residual min=-0.043765 max=0.061188 Jy/beam ! Clean residual mean=-0.002585 rms=0.019311 Jy/beam ! Combined flux in latest and established models = 0.479188 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.479187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322439Jy sigma=0.001896 ! Fit after self-cal, rms=0.322522Jy sigma=0.001896 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322522Jy sigma=0.001896 ! Fit after self-cal, rms=0.329721Jy sigma=0.001895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.683 mas, bmaj=31.02 mas, bpa=-5.047 degrees ! Estimated noise=608.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885703 Jy ! Component: 100 - total flux cleaned = 0.00883069 Jy ! Component: 150 - total flux cleaned = 0.00884047 Jy ! Component: 200 - total flux cleaned = 0.00884251 Jy ! Total flux subtracted in 200 components = 0.00884251 Jy ! Clean residual min=-0.063502 max=0.080846 Jy/beam ! Clean residual mean=-0.003780 rms=0.027909 Jy/beam ! Combined flux in latest and established models = 0.48803 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 81 components and 0.48803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329852Jy sigma=0.001896 ! Fit after self-cal, rms=0.330755Jy sigma=0.001895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326513 Jy ! Component: 100 - total flux cleaned = 0.000326636 Jy ! Component: 150 - total flux cleaned = 0.000313477 Jy ! Component: 200 - total flux cleaned = 0.000290237 Jy ! Total flux subtracted in 200 components = 0.000290237 Jy ! Clean residual min=-0.063015 max=0.080682 Jy/beam ! Clean residual mean=-0.003772 rms=0.027831 Jy/beam ! Combined flux in latest and established models = 0.48832 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 84 components and 0.48832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330975Jy sigma=0.001895 ! Fit after self-cal, rms=0.331400Jy sigma=0.001895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=14.99 mas, bpa=-8.837 degrees ! Estimated noise=639.717 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.402 x 14.99 at -8.837 degrees (North through East) ! Clean map min=-0.044127 max=0.25858 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=9 mas, bpa=-3.761 degrees ! Estimated noise=1754.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216172 Jy ! Component: 100 - total flux cleaned = 0.328023 Jy ! Component: 150 - total flux cleaned = 0.39037 Jy ! Component: 200 - total flux cleaned = 0.425539 Jy ! Total flux subtracted in 200 components = 0.425539 Jy ! Clean residual min=-0.042788 max=0.063854 Jy/beam ! Clean residual mean=-0.002766 rms=0.018803 Jy/beam ! Combined flux in latest and established models = 0.425539 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.425539 Jy ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=14.99 mas, bpa=-8.837 degrees ! Estimated noise=639.717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0320783 Jy ! Component: 100 - total flux cleaned = 0.0450333 Jy ! Component: 150 - total flux cleaned = 0.0479713 Jy ! Component: 200 - total flux cleaned = 0.0488019 Jy ! Total flux subtracted in 200 components = 0.0488019 Jy ! Clean residual min=-0.044897 max=0.062042 Jy/beam ! Clean residual mean=-0.002672 rms=0.019702 Jy/beam ! Combined flux in latest and established models = 0.474341 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 61 components and 0.474341 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.683 mas, bmaj=31.02 mas, bpa=-5.047 degrees ! Estimated noise=608.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116925 Jy ! Component: 100 - total flux cleaned = 0.0117126 Jy ! Component: 150 - total flux cleaned = 0.0117145 Jy ! Component: 200 - total flux cleaned = 0.0117207 Jy ! Total flux subtracted in 200 components = 0.0117207 Jy ! Clean residual min=-0.062869 max=0.081450 Jy/beam ! Clean residual mean=-0.003789 rms=0.027855 Jy/beam ! Combined flux in latest and established models = 0.486062 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375371 Jy ! Component: 100 - total flux cleaned = 0.000378837 Jy ! Component: 150 - total flux cleaned = 0.000564539 Jy ! Component: 200 - total flux cleaned = 0.000575215 Jy ! Total flux subtracted in 200 components = 0.000575215 Jy ! Clean residual min=-0.062975 max=0.081182 Jy/beam ! Clean residual mean=-0.003787 rms=0.027838 Jy/beam ! Combined flux in latest and established models = 0.486637 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.486637 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=14.99 mas, bpa=-8.837 degrees ! Estimated noise=639.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00790819 Jy ! Component: 100 - total flux cleaned = -0.00792769 Jy ! Component: 150 - total flux cleaned = -0.00774743 Jy ! Component: 200 - total flux cleaned = -0.00758905 Jy ! Total flux subtracted in 200 components = -0.00758905 Jy ! Clean residual min=-0.044773 max=0.061672 Jy/beam ! Clean residual mean=-0.002648 rms=0.019655 Jy/beam ! Combined flux in latest and established models = 0.479048 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 71 components and 0.479048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331538Jy sigma=0.001894 ! Fit after self-cal, rms=0.330251Jy sigma=0.001892 wmodel J1018-3144_S_2013_01_09_pus_map.mod ! Writing 71 model components to file: J1018-3144_S_2013_01_09_pus_map.mod wobs J1018-3144_S_2013_01_09_pus_uvs.fits ! Writing UV FITS file: J1018-3144_S_2013_01_09_pus_uvs.fits wwins J1018-3144_S_2013_01_09_pus_map.win ! wwins: Wrote 1 windows to J1018-3144_S_2013_01_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264269 Jy ! Component: 100 - total flux cleaned = 0.0465149 Jy ! Component: 150 - total flux cleaned = 0.0582905 Jy ! Component: 200 - total flux cleaned = 0.06704 Jy ! Component: 250 - total flux cleaned = 0.073848 Jy ! Component: 300 - total flux cleaned = 0.0815639 Jy ! Component: 350 - total flux cleaned = 0.0901548 Jy ! Component: 400 - total flux cleaned = 0.0983692 Jy ! Component: 450 - total flux cleaned = 0.108534 Jy ! Component: 500 - total flux cleaned = 0.117257 Jy ! Component: 550 - total flux cleaned = 0.124637 Jy ! Component: 600 - total flux cleaned = 0.131807 Jy ! Component: 650 - total flux cleaned = 0.138779 Jy ! Component: 700 - total flux cleaned = 0.145559 Jy ! Component: 750 - total flux cleaned = 0.152159 Jy ! Component: 800 - total flux cleaned = 0.158131 Jy ! Component: 850 - total flux cleaned = 0.164399 Jy ! Component: 900 - total flux cleaned = 0.169639 Jy ! Component: 950 - total flux cleaned = 0.174751 Jy ! Component: 1000 - total flux cleaned = 0.180153 Jy ! Component: 1050 - total flux cleaned = 0.18461 Jy ! Component: 1100 - total flux cleaned = 0.189361 Jy ! Component: 1150 - total flux cleaned = 0.193227 Jy ! Component: 1200 - total flux cleaned = 0.197011 Jy ! Component: 1250 - total flux cleaned = 0.201452 Jy ! Component: 1300 - total flux cleaned = 0.205067 Jy ! Component: 1350 - total flux cleaned = 0.207547 Jy ! Component: 1400 - total flux cleaned = 0.210329 Jy ! Component: 1450 - total flux cleaned = 0.213396 Jy ! Component: 1500 - total flux cleaned = 0.216727 Jy ! Component: 1550 - total flux cleaned = 0.219013 Jy ! Component: 1600 - total flux cleaned = 0.221576 Jy ! Component: 1650 - total flux cleaned = 0.223777 Jy ! Component: 1700 - total flux cleaned = 0.226241 Jy ! Component: 1750 - total flux cleaned = 0.228056 Jy ! Component: 1800 - total flux cleaned = 0.23014 Jy ! Component: 1850 - total flux cleaned = 0.232184 Jy ! Component: 1900 - total flux cleaned = 0.234188 Jy ! Component: 1950 - total flux cleaned = 0.235595 Jy ! Component: 2000 - total flux cleaned = 0.236981 Jy ! Total flux subtracted in 2048 components = 0.238887 Jy ! Clean residual min=-0.013658 max=0.018365 Jy/beam ! Clean residual mean=-0.001491 rms=0.007813 Jy/beam ! Combined flux in latest and established models = 0.717935 Jy keep ! Adding 390 model components to the UV plane model. ! The established model now contains 461 components and 0.717934 Jy ![Exited script file: muppet] wmap "J1018-3144_S_2013_01_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.402 x 14.99 at -8.837 degrees (North through East) ! Clean map min=-0.035249 max=0.26008 Jy/beam ! Writing clean map to FITS file: J1018-3144_S_2013_01_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.260075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00814788 device "J1018-3144_S_2013_01_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1018-3144_S_2013_01_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -9.39869 9.39869 18.7974 37.5947 75.1895 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0244 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.26 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.402 x 14.99 at -8.837 degrees (North through East) ! Clean map min=-0.035249 max=0.26008 Jy/beam quit ! Quitting program ! Log file J1018-3144_S_2013_01_09_pus_uvs.log closed on Tue Nov 4 19:00:59 2014