! Started logfile: J1006-2159_S_2013_01_09_pus_uvs.log on Tue Nov  4 19:00:52 2014
obs J1006-2159_S_2013_01_09_pus_uva.fits
! Reading UV FITS file: J1006-2159_S_2013_01_09_pus_uva.fits
! AN table 1: 107 integrations on 120 of 120 possible baselines.
! Apparent sampling: 0.150467 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1006-2159
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3255 lines of history.
! 
! Reading 7728 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1006-2159_S_2013_01_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1049 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1049 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1049 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1049 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.822892Jy  sigma=0.009575
! Fit after  self-cal, rms=0.815419Jy  sigma=0.009509
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.344 mas, bmaj=16.79 mas, bpa=-26.48 degrees
! Estimated noise=1245.17 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.145362 Jy
! Component: 100  -  total flux cleaned = 0.178796 Jy
! Total flux subtracted in 100 components = 0.178796 Jy
! Clean residual min=-0.009788 max=0.015511 Jy/beam
! Clean residual mean=0.000117 rms=0.004108 Jy/beam
! Combined flux in latest and established models = 0.178796 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.178796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114121Jy  sigma=0.001170
! Fit after  self-cal, rms=0.114121Jy  sigma=0.001170
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.271 mas, bmaj=17.02 mas, bpa=-25.58 degrees
! Estimated noise=713.724 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144228 Jy
! Component: 100  -  total flux cleaned = 0.0216375 Jy
! Component: 150  -  total flux cleaned = 0.0243944 Jy
! Component: 200  -  total flux cleaned = 0.0248228 Jy
! Total flux subtracted in 200 components = 0.0248228 Jy
! Clean residual min=-0.007805 max=0.009375 Jy/beam
! Clean residual mean=0.000173 rms=0.003113 Jy/beam
! Combined flux in latest and established models = 0.203619 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 56 components and 0.203619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111883Jy  sigma=0.001154
! Fit after  self-cal, rms=0.111874Jy  sigma=0.001153
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.12     HH        1.00*    HN        1.00*    
!   KP        1.04     LA        1.01     MC        1.00*    MK        0.86     
!   NL        1.00*    NY        1.00*    OV        0.94     PT        1.08     
!   SC        1.00*    TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.21     HH        1.00*    HN        1.00*    
!   KP        0.99     LA        0.97     MC        1.00*    MK        1.05     
!   NL        1.00*    NY        1.00*    OV        1.02     PT        1.02     
!   SC        1.00*    TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.22     HH        1.00*    HN        1.00*    
!   KP        0.87     LA        0.93     MC        1.00*    MK        1.06     
!   NL        1.00*    NY        1.00*    OV        0.98     PT        1.02     
!   SC        1.00*    TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.20     HH        1.00*    HN        1.00*    
!   KP        0.88     LA        0.77     MC        1.00*    MK        1.13     
!   NL        1.00*    NY        1.00*    OV        0.87     PT        0.90     
!   SC        1.00*    TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.111874Jy  sigma=0.001153
! Fit after  self-cal, rms=0.103856Jy  sigma=0.001110
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.336 mas, bmaj=17.23 mas, bpa=-25.74 degrees
! Estimated noise=712.249 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000673598 Jy
! Component: 100  -  total flux cleaned = -0.000604104 Jy
! Component: 150  -  total flux cleaned = -0.000492299 Jy
! Component: 200  -  total flux cleaned = -0.000298239 Jy
! Total flux subtracted in 200 components = -0.000298239 Jy
! Clean residual min=-0.002988 max=0.003388 Jy/beam
! Clean residual mean=0.000036 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 0.20332 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 69 components and 0.20332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103750Jy  sigma=0.001109
! Fit after  self-cal, rms=0.103695Jy  sigma=0.001108
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103695Jy  sigma=0.001108
! Fit after  self-cal, rms=0.104138Jy  sigma=0.001108
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.339 mas, bmaj=17.29 mas, bpa=-25.75 degrees
! Estimated noise=714.613 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253684 Jy
! Component: 100  -  total flux cleaned = 0.000295046 Jy
! Component: 150  -  total flux cleaned = 0.000469192 Jy
! Component: 200  -  total flux cleaned = 0.000625998 Jy
! Total flux subtracted in 200 components = 0.000625998 Jy
! Clean residual min=-0.002685 max=0.002912 Jy/beam
! Clean residual mean=0.000034 rms=0.000756 Jy/beam
! Combined flux in latest and established models = 0.203946 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 78 components and 0.203946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104101Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104110Jy  sigma=0.001107
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250538 Jy
! Component: 100  -  total flux cleaned = 0.000364894 Jy
! Component: 150  -  total flux cleaned = 0.000492466 Jy
! Component: 200  -  total flux cleaned = 0.000632245 Jy
! Total flux subtracted in 200 components = 0.000632245 Jy
! Clean residual min=-0.002589 max=0.002712 Jy/beam
! Clean residual mean=0.000034 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.204579 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 85 components and 0.204579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104095Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104098Jy  sigma=0.001107
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104098Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104444Jy  sigma=0.001107
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=17.31 mas, bpa=-25.75 degrees
! Estimated noise=716.459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000525889 Jy
! Component: 100  -  total flux cleaned = 0.000630089 Jy
! Component: 150  -  total flux cleaned = 0.000718735 Jy
! Component: 200  -  total flux cleaned = 0.000799629 Jy
! Total flux subtracted in 200 components = 0.000799629 Jy
! Clean residual min=-0.002432 max=0.002474 Jy/beam
! Clean residual mean=0.000032 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.205378 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 95 components and 0.205378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104431Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104436Jy  sigma=0.001107
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013046 Jy
! Component: 100  -  total flux cleaned = 0.000215859 Jy
! Component: 150  -  total flux cleaned = 0.000294932 Jy
! Component: 200  -  total flux cleaned = 0.000369046 Jy
! Total flux subtracted in 200 components = 0.000369046 Jy
! Clean residual min=-0.002358 max=0.002318 Jy/beam
! Clean residual mean=0.000032 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.205747 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 104 components and 0.205747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104430Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104431Jy  sigma=0.001107
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104431Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104637Jy  sigma=0.001107
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.53 mas, bmaj=21.39 mas, bpa=7.375 degrees
! Estimated noise=770.121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000670417 Jy
! Component: 100  -  total flux cleaned = 0.000776479 Jy
! Component: 150  -  total flux cleaned = 0.00085468 Jy
! Component: 200  -  total flux cleaned = 0.000926503 Jy
! Total flux subtracted in 200 components = 0.000926503 Jy
! Clean residual min=-0.001796 max=0.002530 Jy/beam
! Clean residual mean=0.000044 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.206674 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 121 components and 0.206674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104633Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104635Jy  sigma=0.001107
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.09018e-05 Jy
! Component: 100  -  total flux cleaned = 0.000120761 Jy
! Component: 150  -  total flux cleaned = 0.000178901 Jy
! Component: 200  -  total flux cleaned = 0.000233163 Jy
! Total flux subtracted in 200 components = 0.000233163 Jy
! Clean residual min=-0.001780 max=0.002479 Jy/beam
! Clean residual mean=0.000044 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.206907 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 135 components and 0.206907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104634Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104634Jy  sigma=0.001107
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=17.33 mas, bpa=-25.75 degrees
! Estimated noise=717.695 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.34 x 17.33 at -25.75 degrees (North through East)
! Clean map  min=-0.0021743  max=0.1863 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.398 mas, bmaj=17 mas, bpa=-26.75 degrees
! Estimated noise=1255.62 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146299 Jy
! Component: 100  -  total flux cleaned = 0.178969 Jy
! Component: 150  -  total flux cleaned = 0.189925 Jy
! Component: 200  -  total flux cleaned = 0.195588 Jy
! Total flux subtracted in 200 components = 0.195588 Jy
! Clean residual min=-0.004053 max=0.004264 Jy/beam
! Clean residual mean=0.000010 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.195588 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.195588 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=17.33 mas, bpa=-25.75 degrees
! Estimated noise=717.695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450585 Jy
! Component: 100  -  total flux cleaned = 0.00697648 Jy
! Component: 150  -  total flux cleaned = 0.00852671 Jy
! Component: 200  -  total flux cleaned = 0.00958439 Jy
! Total flux subtracted in 200 components = 0.00958439 Jy
! Clean residual min=-0.002498 max=0.002870 Jy/beam
! Clean residual mean=0.000028 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.205172 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 66 components and 0.205172 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.53 mas, bmaj=21.39 mas, bpa=7.375 degrees
! Estimated noise=770.121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000874073 Jy
! Component: 100  -  total flux cleaned = 0.00106766 Jy
! Component: 150  -  total flux cleaned = 0.00120352 Jy
! Component: 200  -  total flux cleaned = 0.00133191 Jy
! Total flux subtracted in 200 components = 0.00133191 Jy
! Clean residual min=-0.002070 max=0.003039 Jy/beam
! Clean residual mean=0.000040 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.206504 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122489 Jy
! Component: 100  -  total flux cleaned = 0.000238805 Jy
! Component: 150  -  total flux cleaned = 0.000348817 Jy
! Component: 200  -  total flux cleaned = 0.000453483 Jy
! Total flux subtracted in 200 components = 0.000453483 Jy
! Clean residual min=-0.002012 max=0.002881 Jy/beam
! Clean residual mean=0.000040 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.206958 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 80 components and 0.206958 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.34 mas, bmaj=17.33 mas, bpa=-25.75 degrees
! Estimated noise=717.695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.6125e-05 Jy
! Component: 100  -  total flux cleaned = 0.00023236 Jy
! Component: 150  -  total flux cleaned = 0.000331111 Jy
! Component: 200  -  total flux cleaned = 0.000401747 Jy
! Total flux subtracted in 200 components = 0.000401747 Jy
! Clean residual min=-0.002296 max=0.002460 Jy/beam
! Clean residual mean=0.000028 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.207359 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 93 components and 0.207359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104650Jy  sigma=0.001107
! Fit after  self-cal, rms=0.104648Jy  sigma=0.001107
wmodel J1006-2159_S_2013_01_09_pus_map.mod
! Writing 93 model components to file: J1006-2159_S_2013_01_09_pus_map.mod
wobs J1006-2159_S_2013_01_09_pus_uvs.fits
! Writing UV FITS file: J1006-2159_S_2013_01_09_pus_uvs.fits
wwins J1006-2159_S_2013_01_09_pus_map.win
! wwins: Wrote 1 windows to J1006-2159_S_2013_01_09_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140381 Jy
! Component: 100  -  total flux cleaned = 0.000433285 Jy
! Component: 150  -  total flux cleaned = 0.000379273 Jy
! Component: 200  -  total flux cleaned = 0.000579371 Jy
! Component: 250  -  total flux cleaned = 0.00079169 Jy
! Component: 300  -  total flux cleaned = 0.000992565 Jy
! Component: 350  -  total flux cleaned = 0.00114098 Jy
! Component: 400  -  total flux cleaned = 0.00118146 Jy
! Component: 450  -  total flux cleaned = 0.00122019 Jy
! Component: 500  -  total flux cleaned = 0.00125677 Jy
! Component: 550  -  total flux cleaned = 0.00120277 Jy
! Component: 600  -  total flux cleaned = 0.00120302 Jy
! Component: 650  -  total flux cleaned = 0.00121993 Jy
! Component: 700  -  total flux cleaned = 0.00118664 Jy
! Component: 750  -  total flux cleaned = 0.00118705 Jy
! Component: 800  -  total flux cleaned = 0.00118689 Jy
! Component: 850  -  total flux cleaned = 0.00118712 Jy
! Component: 900  -  total flux cleaned = 0.00118712 Jy
! Component: 950  -  total flux cleaned = 0.00115767 Jy
! Component: 1000  -  total flux cleaned = 0.00117245 Jy
! Component: 1050  -  total flux cleaned = 0.00115833 Jy
! Component: 1100  -  total flux cleaned = 0.00115842 Jy
! Component: 1150  -  total flux cleaned = 0.00114482 Jy
! Component: 1200  -  total flux cleaned = 0.00107726 Jy
! Component: 1250  -  total flux cleaned = 0.00101122 Jy
! Component: 1300  -  total flux cleaned = 0.000959428 Jy
! Component: 1350  -  total flux cleaned = 0.000895953 Jy
! Component: 1400  -  total flux cleaned = 0.000883474 Jy
! Component: 1450  -  total flux cleaned = 0.00083403 Jy
! Component: 1500  -  total flux cleaned = 0.0008097 Jy
! Component: 1550  -  total flux cleaned = 0.000749919 Jy
! Component: 1600  -  total flux cleaned = 0.000726342 Jy
! Component: 1650  -  total flux cleaned = 0.00067984 Jy
! Component: 1700  -  total flux cleaned = 0.000679784 Jy
! Component: 1750  -  total flux cleaned = 0.000645745 Jy
! Component: 1800  -  total flux cleaned = 0.000612379 Jy
! Component: 1850  -  total flux cleaned = 0.00056833 Jy
! Component: 1900  -  total flux cleaned = 0.000492371 Jy
! Component: 1950  -  total flux cleaned = 0.000427943 Jy
! Component: 2000  -  total flux cleaned = 0.000364297 Jy
! Total flux subtracted in 2048 components = 0.000322304 Jy
! Clean residual min=-0.000622 max=0.000621 Jy/beam
! Clean residual mean=0.000020 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.207682 Jy
keep
! Adding 124 model components to the UV plane model.
! The established model now contains 217 components and 0.207682 Jy
![Exited script file: muppet]
wmap "J1006-2159_S_2013_01_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.34 x 17.33 at -25.75 degrees (North through East)
! Clean map  min=-0.0015829  max=0.18434 Jy/beam
! Writing clean map to FITS file: J1006-2159_S_2013_01_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.184341 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000230661 
device "J1006-2159_S_2013_01_09_pus\_map.eps/VPS"
! Attempting to open device: 'J1006-2159_S_2013_01_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.375383 0.375383 0.750765 1.50153 3.00306 6.00612 12.0122 24.0245 48.049 96.098
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.184 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.34 x 17.33 at -25.75 degrees (North through East)
! Clean map  min=-0.0015829  max=0.18434 Jy/beam
quit
! Quitting program
! Log file J1006-2159_S_2013_01_09_pus_uvs.log closed on Tue Nov  4 19:00:54 2014