! Started logfile: J0526-4830_S_2013_01_09_pus_uvs.log on Tue Nov  4 18:59:45 2014
obs J0526-4830_S_2013_01_09_pus_uva.fits
! Reading UV FITS file: J0526-4830_S_2013_01_09_pus_uva.fits
! AN table 1: 86 integrations on 120 of 120 possible baselines.
! Apparent sampling: 0.0739341 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0526-4830
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 3255 lines of history.
! 
! Reading 3052 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0526-4830_S_2013_01_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 987 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 987 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 987 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 987 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.609296Jy  sigma=0.005192
! Fit after  self-cal, rms=0.547307Jy  sigma=0.004632
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.685 mas, bmaj=10.23 mas, bpa=-1.601 degrees
! Estimated noise=2119.68 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.358988 Jy
! Component: 100  -  total flux cleaned = 0.446118 Jy
! Total flux subtracted in 100 components = 0.446118 Jy
! Clean residual min=-0.025296 max=0.035771 Jy/beam
! Clean residual mean=0.000116 rms=0.010276 Jy/beam
! Combined flux in latest and established models = 0.446118 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.446118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175111Jy  sigma=0.001287
! Fit after  self-cal, rms=0.175005Jy  sigma=0.001287
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.568 mas, bmaj=13.55 mas, bpa=-4.294 degrees
! Estimated noise=1592.58 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442261 Jy
! Component: 100  -  total flux cleaned = 0.0559672 Jy
! Component: 150  -  total flux cleaned = 0.0651159 Jy
! Component: 200  -  total flux cleaned = 0.0735909 Jy
! Total flux subtracted in 200 components = 0.0735909 Jy
! Clean residual min=-0.008788 max=0.008931 Jy/beam
! Clean residual mean=0.000336 rms=0.004135 Jy/beam
! Combined flux in latest and established models = 0.519709 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 33 components and 0.519709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158967Jy  sigma=0.001196
! Fit after  self-cal, rms=0.158746Jy  sigma=0.001195
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.02     HH        1.00*    HN        1.00*    
!   KP        1.03     LA        1.05     MC        1.00*    MK        0.85     
!   NL        1.00*    NY        1.00*    OV        1.00*    PT        1.03     
!   SC        0.85     TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.12     HH        1.00*    HN        1.00*    
!   KP        1.02     LA        1.00     MC        1.00*    MK        0.96     
!   NL        1.00*    NY        1.00*    OV        1.00*    PT        1.05     
!   SC        1.02     TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.13     HH        1.00*    HN        1.00*    
!   KP        0.87     LA        0.95     MC        1.00*    MK        0.93     
!   NL        1.00*    NY        1.00*    OV        1.00*    PT        1.04     
!   SC        1.02     TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.14     HH        1.00*    HN        1.00*    
!   KP        0.87     LA        0.80     MC        1.00*    MK        1.05     
!   NL        1.00*    NY        1.00*    OV        1.00*    PT        0.93     
!   SC        1.09     TS        1.00*    WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.158746Jy  sigma=0.001195
! Fit after  self-cal, rms=0.138657Jy  sigma=0.001105
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.515 mas, bmaj=13.36 mas, bpa=-4.665 degrees
! Estimated noise=1582.04 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00459822 Jy
! Component: 100  -  total flux cleaned = -0.00681092 Jy
! Component: 150  -  total flux cleaned = -0.00665195 Jy
! Component: 200  -  total flux cleaned = -0.00531497 Jy
! Total flux subtracted in 200 components = -0.00531497 Jy
! Clean residual min=-0.002613 max=0.002613 Jy/beam
! Clean residual mean=0.000147 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.514394 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 71 components and 0.514394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137976Jy  sigma=0.001099
! Fit after  self-cal, rms=0.137885Jy  sigma=0.001098
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137885Jy  sigma=0.001098
! Fit after  self-cal, rms=0.137616Jy  sigma=0.001098
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.519 mas, bmaj=13.37 mas, bpa=-4.689 degrees
! Estimated noise=1578.76 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183389 Jy
! Component: 100  -  total flux cleaned = -0.00146167 Jy
! Component: 150  -  total flux cleaned = -0.000913657 Jy
! Component: 200  -  total flux cleaned = -0.000511154 Jy
! Total flux subtracted in 200 components = -0.000511154 Jy
! Clean residual min=-0.001606 max=0.001611 Jy/beam
! Clean residual mean=0.000102 rms=0.000744 Jy/beam
! Combined flux in latest and established models = 0.513883 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 104 components and 0.513883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137415Jy  sigma=0.001096
! Fit after  self-cal, rms=0.137410Jy  sigma=0.001096
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000964855 Jy
! Component: 100  -  total flux cleaned = 0.00162742 Jy
! Component: 150  -  total flux cleaned = 0.00193402 Jy
! Component: 200  -  total flux cleaned = 0.00222532 Jy
! Total flux subtracted in 200 components = 0.00222532 Jy
! Clean residual min=-0.001170 max=0.001183 Jy/beam
! Clean residual mean=0.000087 rms=0.000552 Jy/beam
! Combined flux in latest and established models = 0.516108 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 127 components and 0.516108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137328Jy  sigma=0.001095
! Fit after  self-cal, rms=0.137323Jy  sigma=0.001095
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137323Jy  sigma=0.001095
! Fit after  self-cal, rms=0.136907Jy  sigma=0.001093
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.522 mas, bmaj=13.39 mas, bpa=-4.687 degrees
! Estimated noise=1576.29 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308752 Jy
! Component: 100  -  total flux cleaned = 0.000723878 Jy
! Component: 150  -  total flux cleaned = 0.0009307 Jy
! Component: 200  -  total flux cleaned = 0.00111455 Jy
! Total flux subtracted in 200 components = 0.00111455 Jy
! Clean residual min=-0.000968 max=0.000968 Jy/beam
! Clean residual mean=0.000020 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.517223 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 174 components and 0.517223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136823Jy  sigma=0.001092
! Fit after  self-cal, rms=0.136828Jy  sigma=0.001092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258815 Jy
! Component: 100  -  total flux cleaned = 0.000367774 Jy
! Component: 150  -  total flux cleaned = 0.000517915 Jy
! Component: 200  -  total flux cleaned = 0.000609257 Jy
! Total flux subtracted in 200 components = 0.000609257 Jy
! Clean residual min=-0.000748 max=0.000745 Jy/beam
! Clean residual mean=0.000001 rms=0.000318 Jy/beam
! Combined flux in latest and established models = 0.517832 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 196 components and 0.517832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136791Jy  sigma=0.001092
! Fit after  self-cal, rms=0.136786Jy  sigma=0.001092
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136786Jy  sigma=0.001092
! Fit after  self-cal, rms=0.136732Jy  sigma=0.001091
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.81 mas, bmaj=56.99 mas, bpa=-0.1222 degrees
! Estimated noise=1885.63 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000818765 Jy
! Component: 100  -  total flux cleaned = -0.00123843 Jy
! Component: 150  -  total flux cleaned = -0.0014177 Jy
! Component: 200  -  total flux cleaned = -0.00160589 Jy
! Total flux subtracted in 200 components = -0.00160589 Jy
! Clean residual min=-0.000263 max=0.000261 Jy/beam
! Clean residual mean=0.000021 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.516226 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 238 components and 0.516226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136726Jy  sigma=0.001091
! Fit after  self-cal, rms=0.136725Jy  sigma=0.001091
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199289 Jy
! Component: 100  -  total flux cleaned = -6.40962e-06 Jy
! Component: 150  -  total flux cleaned = -5.57536e-05 Jy
! Component: 200  -  total flux cleaned = -1.19094e-05 Jy
! Total flux subtracted in 200 components = -1.19094e-05 Jy
! Clean residual min=-0.000237 max=0.000238 Jy/beam
! Clean residual mean=0.000006 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.516214 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 263 components and 0.516214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136719Jy  sigma=0.001091
! Fit after  self-cal, rms=0.136718Jy  sigma=0.001091
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.521 mas, bmaj=13.38 mas, bpa=-4.696 degrees
! Estimated noise=1575.84 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.521 x 13.38 at -4.696 degrees (North through East)
! Clean map  min=-0.0045701  max=0.41935 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.666 mas, bmaj=10.12 mas, bpa=-2.029 degrees
! Estimated noise=2090.58 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.353871 Jy
! Component: 100  -  total flux cleaned = 0.435515 Jy
! Component: 150  -  total flux cleaned = 0.46919 Jy
! Component: 200  -  total flux cleaned = 0.489117 Jy
! Total flux subtracted in 200 components = 0.489117 Jy
! Clean residual min=-0.008651 max=0.010475 Jy/beam
! Clean residual mean=-0.000042 rms=0.003555 Jy/beam
! Combined flux in latest and established models = 0.489117 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.489117 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.521 mas, bmaj=13.38 mas, bpa=-4.696 degrees
! Estimated noise=1575.84 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00306707 Jy
! Component: 100  -  total flux cleaned = 0.00457997 Jy
! Component: 150  -  total flux cleaned = 0.00764299 Jy
! Component: 200  -  total flux cleaned = 0.0104293 Jy
! Total flux subtracted in 200 components = 0.0104293 Jy
! Clean residual min=-0.003777 max=0.003853 Jy/beam
! Clean residual mean=0.000115 rms=0.001821 Jy/beam
! Combined flux in latest and established models = 0.499546 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 63 components and 0.499546 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.81 mas, bmaj=56.99 mas, bpa=-0.1222 degrees
! Estimated noise=1885.63 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000784735 Jy
! Component: 100  -  total flux cleaned = 0.00261148 Jy
! Component: 150  -  total flux cleaned = 0.00409394 Jy
! Component: 200  -  total flux cleaned = 0.00533292 Jy
! Total flux subtracted in 200 components = 0.00533292 Jy
! Clean residual min=-0.001557 max=0.001569 Jy/beam
! Clean residual mean=0.000256 rms=0.000902 Jy/beam
! Combined flux in latest and established models = 0.504879 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104424 Jy
! Component: 100  -  total flux cleaned = 0.00184352 Jy
! Component: 150  -  total flux cleaned = 0.00265805 Jy
! Component: 200  -  total flux cleaned = 0.00352833 Jy
! Total flux subtracted in 200 components = 0.00352833 Jy
! Clean residual min=-0.000923 max=0.000925 Jy/beam
! Clean residual mean=0.000198 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.508407 Jy
! Adding 121 model components to the UV plane model.
! The established model now contains 179 components and 0.508407 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.521 mas, bmaj=13.38 mas, bpa=-4.696 degrees
! Estimated noise=1575.84 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163028 Jy
! Component: 100  -  total flux cleaned = 0.00309758 Jy
! Component: 150  -  total flux cleaned = 0.00401909 Jy
! Component: 200  -  total flux cleaned = 0.00483829 Jy
! Total flux subtracted in 200 components = 0.00483829 Jy
! Clean residual min=-0.001164 max=0.001173 Jy/beam
! Clean residual mean=0.000093 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.513245 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 204 components and 0.513245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136770Jy  sigma=0.001092
! Fit after  self-cal, rms=0.136769Jy  sigma=0.001092
wmodel J0526-4830_S_2013_01_09_pus_map.mod
! Writing 204 model components to file: J0526-4830_S_2013_01_09_pus_map.mod
wobs J0526-4830_S_2013_01_09_pus_uvs.fits
! Writing UV FITS file: J0526-4830_S_2013_01_09_pus_uvs.fits
wwins J0526-4830_S_2013_01_09_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0526-4830_S_2013_01_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.521 x 13.38 at -4.696 degrees (North through East)
! Clean map  min=-0.0057083  max=0.4282 Jy/beam
! Writing clean map to FITS file: J0526-4830_S_2013_01_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.428198 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000447282 
device "J0526-4830_S_2013_01_09_pus\_map.eps/VPS"
! Attempting to open device: 'J0526-4830_S_2013_01_09_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.31337 0.31337 0.626741 1.25348 2.50696 5.01393 10.0279 20.0557 40.1114 80.2228
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.428 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.521 x 13.38 at -4.696 degrees (North through East)
! Clean map  min=-0.0057083  max=0.4282 Jy/beam
quit
! Quitting program
! Log file J0526-4830_S_2013_01_09_pus_uvs.log closed on Tue Nov  4 18:59:47 2014