! Started logfile: /scr/pima/rdv96_uvs/J1223+4812_S_uvs.log on Sat Dec 21 00:23:57 2013
obs /scr/pima/rdv96_uvs/J1223+4812_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv96_uvs/J1223+4812_S_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1223+4812
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7920 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.4 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv96_uvs/J1223+4812_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 800000
float soltime2
soltime2 = 15
float soltime3
soltime3 = 1
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float old_peak
float new_peak
float flux_cutoff
selfant "",false
! 1:BR       self-cal  status=correctable  weight=1
! 1:FD       self-cal  status=correctable  weight=1
! 1:HN       self-cal  status=correctable  weight=1
! 1:KP       self-cal  status=correctable  weight=1
! 1:LA       self-cal  status=correctable  weight=1
! 1:MK       self-cal  status=correctable  weight=1
! 1:NL       self-cal  status=correctable  weight=1
! 1:OV       self-cal  status=correctable  weight=1
! 1:PT       self-cal  status=correctable  weight=1
! 1:SC       self-cal  status=correctable  weight=1
system "rm /tmp/ff.ff"
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.032347Jy  sigma=4.093942
! Fit after  self-cal, rms=0.756991Jy  sigma=2.949834
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
print "=== Flag out IVS stations"
! === Flag out IVS stations 
integer lun
string  cfg_file
lun = outfile ( "/tmp/ff.ff" ) 
do i=1,nsub
  do j=1,ntel(i)
    fprintf lun, "%s\n", telname(j,i)
    end do
  end do
close ( lun )
system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff"
![@/tmp/ff.ff \]
![Exited script file: /tmp/ff.ff]
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.116 mas, bmaj=5.013 mas, bpa=2.257 degrees
! Estimated noise=4.26681 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187217 Jy
! Component: 100  -  total flux cleaned = 0.230417 Jy
! Total flux subtracted in 100 components = 0.230417 Jy
! Clean residual min=-0.008396 max=0.027446 Jy/beam
! Clean residual mean=0.000038 rms=0.002601 Jy/beam
! Combined flux in latest and established models = 0.230417 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.230417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071895Jy  sigma=0.298344
! Fit after  self-cal, rms=0.071909Jy  sigma=0.298293
! Inverting map 
! Added new window around map position (-6.4, -3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246044 Jy
! Component: 100  -  total flux cleaned = 0.0380173 Jy
! Total flux subtracted in 100 components = 0.0380173 Jy
! Clean residual min=-0.006467 max=0.007986 Jy/beam
! Clean residual mean=0.000029 rms=0.001649 Jy/beam
! Combined flux in latest and established models = 0.268435 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.268435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062247Jy  sigma=0.246059
! Fit after  self-cal, rms=0.061473Jy  sigma=0.243436
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00981366 Jy
! Component: 100  -  total flux cleaned = 0.0159942 Jy
! Total flux subtracted in 100 components = 0.0159942 Jy
! Clean residual min=-0.005739 max=0.005170 Jy/beam
! Clean residual mean=0.000025 rms=0.001347 Jy/beam
! Combined flux in latest and established models = 0.284429 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 46 components and 0.284429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059541Jy  sigma=0.231508
! Fit after  self-cal, rms=0.059415Jy  sigma=0.231099
! Inverting map 
print "=== Finished uniform weighting clean ==="
! === Finished uniform weighting clean === 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.034 mas, bmaj=6.057 mas, bpa=2.833 degrees
! Estimated noise=2.06701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00801111 Jy
! Component: 100  -  total flux cleaned = 0.0126519 Jy
! Component: 150  -  total flux cleaned = 0.0158222 Jy
! Component: 200  -  total flux cleaned = 0.0180588 Jy
! Total flux subtracted in 200 components = 0.0180588 Jy
! Clean residual min=-0.004395 max=0.007245 Jy/beam
! Clean residual mean=0.000021 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 0.302488 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 88 components and 0.302488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058516Jy  sigma=0.225183
! Fit after  self-cal, rms=0.058447Jy  sigma=0.224909
! Inverting map 
! Added new window around map position (-27.2, -17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455306 Jy
! Component: 100  -  total flux cleaned = 0.00548098 Jy
! Component: 150  -  total flux cleaned = 0.00624957 Jy
! Component: 200  -  total flux cleaned = 0.00697366 Jy
! Total flux subtracted in 200 components = 0.00697366 Jy
! Clean residual min=-0.003938 max=0.003998 Jy/beam
! Clean residual mean=0.000036 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.309461 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 118 components and 0.309461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057824Jy  sigma=0.221974
! Fit after  self-cal, rms=0.057809Jy  sigma=0.221882
! Inverting map 
print "=== Finished natural weighting clean for VLBI sites ==="
! === Finished natural weighting clean for VLBI sites === 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.95     HN        0.98     KP        1.02     
!   LA        1.17     MK        0.92     NL        0.98     OV        0.98     
!   PT        1.04     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.05     KP        1.02     
!   LA        1.05     MK        1.03     NL        1.02     OV        1.03     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        1.03     KP        0.92     
!   LA        0.99     MK        1.03     NL        1.08     OV        1.04     
!   PT        1.06     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        0.94     KP        0.85     
!   LA        0.84     MK        1.15     NL        1.01     OV        0.89     
!   PT        0.95     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.057809Jy  sigma=0.221882
! Fit after  self-cal, rms=0.051052Jy  sigma=0.187049
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.043 mas, bmaj=6.073 mas, bpa=3.06 degrees
! Estimated noise=2.06332 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219705 Jy
! Component: 100  -  total flux cleaned = 0.00300606 Jy
! Component: 150  -  total flux cleaned = 0.00368395 Jy
! Component: 200  -  total flux cleaned = 0.00418834 Jy
! Total flux subtracted in 200 components = 0.00418834 Jy
! Clean residual min=-0.002343 max=0.001884 Jy/beam
! Clean residual mean=0.000005 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.31365 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.31365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050913Jy  sigma=0.186462
! Fit after  self-cal, rms=0.050930Jy  sigma=0.186388
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 800000 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050930Jy  sigma=0.186388
! Fit after  self-cal, rms=0.050967Jy  sigma=0.186355
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.045 mas, bmaj=6.074 mas, bpa=3.049 degrees
! Estimated noise=2.06325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000694811 Jy
! Component: 100  -  total flux cleaned = 0.00119692 Jy
! Component: 150  -  total flux cleaned = 0.00149813 Jy
! Component: 200  -  total flux cleaned = 0.00170807 Jy
! Total flux subtracted in 200 components = 0.00170807 Jy
! Clean residual min=-0.002167 max=0.001807 Jy/beam
! Clean residual mean=0.000005 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.315358 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 154 components and 0.315358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050921Jy  sigma=0.186208
! Fit after  self-cal, rms=0.050920Jy  sigma=0.186197
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228268 Jy
! Component: 100  -  total flux cleaned = 0.000346094 Jy
! Component: 150  -  total flux cleaned = 0.00038836 Jy
! Component: 200  -  total flux cleaned = 0.000427724 Jy
! Total flux subtracted in 200 components = 0.000427724 Jy
! Clean residual min=-0.002094 max=0.001825 Jy/beam
! Clean residual mean=0.000006 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.315786 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 168 components and 0.315786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050900Jy  sigma=0.186138
! Fit after  self-cal, rms=0.050899Jy  sigma=0.186135
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 15 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050899Jy  sigma=0.186135
! Fit after  self-cal, rms=0.050620Jy  sigma=0.184778
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.045 mas, bmaj=6.059 mas, bpa=3.245 degrees
! Estimated noise=2.06282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000214819 Jy
! Component: 100  -  total flux cleaned = -0.000261222 Jy
! Component: 150  -  total flux cleaned = -0.000260772 Jy
! Component: 200  -  total flux cleaned = -0.000278833 Jy
! Total flux subtracted in 200 components = -0.000278833 Jy
! Clean residual min=-0.001576 max=0.001808 Jy/beam
! Clean residual mean=0.000004 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.315507 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 183 components and 0.315507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050596Jy  sigma=0.184715
! Fit after  self-cal, rms=0.050598Jy  sigma=0.184710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-15.2, -24.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150925 Jy
! Component: 100  -  total flux cleaned = 0.00191671 Jy
! Component: 150  -  total flux cleaned = 0.00199011 Jy
! Component: 200  -  total flux cleaned = 0.0019914 Jy
! Total flux subtracted in 200 components = 0.0019914 Jy
! Clean residual min=-0.001473 max=0.001574 Jy/beam
! Clean residual mean=0.000006 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.317498 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 208 components and 0.317498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050544Jy  sigma=0.184515
! Fit after  self-cal, rms=0.050544Jy  sigma=0.184510
! Inverting map 
! Added new window around map position (-13.2, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709591 Jy
! Component: 100  -  total flux cleaned = 0.00105133 Jy
! Component: 150  -  total flux cleaned = 0.0013061 Jy
! Component: 200  -  total flux cleaned = 0.00148411 Jy
! Total flux subtracted in 200 components = 0.00148411 Jy
! Clean residual min=-0.001274 max=0.001204 Jy/beam
! Clean residual mean=0.000006 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.318982 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 226 components and 0.318982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050495Jy  sigma=0.184308
! Fit after  self-cal, rms=0.050494Jy  sigma=0.184301
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 15 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050494Jy  sigma=0.184301
! Fit after  self-cal, rms=0.050450Jy  sigma=0.184257
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.073 mas, bmaj=9.671 mas, bpa=14.07 degrees
! Estimated noise=2.25393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000579442 Jy
! Component: 100  -  total flux cleaned = 0.000844653 Jy
! Component: 150  -  total flux cleaned = 0.00103545 Jy
! Component: 200  -  total flux cleaned = 0.00112651 Jy
! Total flux subtracted in 200 components = 0.00112651 Jy
! Clean residual min=-0.001283 max=0.001252 Jy/beam
! Clean residual mean=0.000022 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.320109 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 253 components and 0.320109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050444Jy  sigma=0.184218
! Fit after  self-cal, rms=0.050443Jy  sigma=0.184217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167614 Jy
! Component: 100  -  total flux cleaned = 0.000220618 Jy
! Component: 150  -  total flux cleaned = 0.000268717 Jy
! Component: 200  -  total flux cleaned = 0.000290768 Jy
! Total flux subtracted in 200 components = 0.000290768 Jy
! Clean residual min=-0.001271 max=0.001231 Jy/beam
! Clean residual mean=0.000022 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.320399 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 269 components and 0.3204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050440Jy  sigma=0.184200
! Fit after  self-cal, rms=0.050440Jy  sigma=0.184199
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "=== Finished amplitude self-cal for VLBA stations ==="
! === Finished amplitude self-cal for VLBA stations === 
unflag *
! Unflagging all baselines in the currently selected channels.
uncalib false, false, true
! uncal: All telescope correction flags have been un-done.
integer lun
lun = outfile ( "/tmp/ff.ff" )
do i=1,nsub
  do j=1,ntel(i)
    fprintf lun, "%s\n", telname(j,i)
    end do
  end do
close ( lun )
system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff"
![@/tmp/ff.ff]
1:BR
! Syntax error in line:
! 1:BR
! ^
! Found constant: 1.000 
! Where a command or assignment expression was expected.
![Exited script file: /tmp/ff.ff]
![Exited script file: /home/lpetrov/bin/rdv_muppet]
! 
wmap "/scr/pima/rdv96_uvs/J1223+4812_S\_map.fits"
! Inverting map and beam 
! Estimated beam: bmin=4.043 mas, bmaj=6.058 mas, bpa=3.193 degrees
! Estimated noise=2.06183 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.043 x 6.058 at 3.193 degrees (North through East)
! Clean map  min=-0.0012874  max=0.24409 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv96_uvs/J1223+4812_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
invert
! Inverting map 
float image_peak
image_peak = int(10000*peak_flux)/10000
float image_rms
image_rms  = int(100000*imstat(rms))/100000
print "========================================="
! ========================================= 
print "The image peak= ", image_peak, " rms= ", image_rms, " Jy"
! The image peak=  0.244  rms=  0.00031  Jy 
quit
! Quitting program
! Log file /scr/pima/rdv96_uvs/J1223+4812_S_uvs.log closed on Sat Dec 21 00:24:00 2013