! Started logfile: /scr/pima/rdv95_uvs/J2139+1423_X_uvs.log on Wed Nov 6 20:50:12 2013 obs /scr/pima/rdv95_uvs/J2139+1423_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J2139+1423_X_uva.fits ! AN table 1: 2 integrations on 3 of 3 possible baselines. ! AN table 2: 2 integrations on 10 of 10 possible baselines. ! AN table 3: 2 integrations on 15 of 15 possible baselines. ! AN table 4: 2 integrations on 10 of 10 possible baselines. ! AN table 5: 2 integrations on 6 of 6 possible baselines. ! AN table 6: 2 integrations on 3 of 3 possible baselines. ! AN table 7: 2 integrations on 66 of 66 possible baselines. ! AN table 8: 2 integrations on 1 of 1 possible baselines. ! AN table 9: 2 integrations on 3 of 3 possible baselines. ! AN table 10: 2 integrations on 1 of 1 possible baselines. ! AN table 11: 6 integrations on 1 of 1 possible baselines. ! AN table 12: 2 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.97541 visibilities/baseline/integration-bin. ! Found source: J2139+1423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 952 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J2139+1423_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:MA self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 9:MA self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:WZ self-cal status=correctable weight=1 ! 10:MA self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 11:MA self-cal status=correctable weight=1 ! 11:WZ self-cal status=correctable weight=1 ! 12:NY self-cal status=correctable weight=1 ! 12:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Fit before self-cal, rms=1.964783Jy sigma=53.340587 ! Fit after self-cal, rms=0.931054Jy sigma=27.504487 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:MA ! Flagging baselines of antenna 1:MA in the currently selected channels. flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 2:FT ! Flagging baselines of antenna 2:FT in the currently selected channels. flag 2:MA ! Flagging baselines of antenna 2:MA in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:MA ! Flagging baselines of antenna 3:MA in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:FT ! Flagging baselines of antenna 5:FT in the currently selected channels. flag 5:MA ! Flagging baselines of antenna 5:MA in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:FT ! Flagging baselines of antenna 7:FT in the currently selected channels. flag 7:MA ! Flagging baselines of antenna 7:MA in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 8:NY ! Flagging baselines of antenna 8:NY in the currently selected channels. flag 9:MA ! Flagging baselines of antenna 9:MA in the currently selected channels. flag 9:NY ! Flagging baselines of antenna 9:NY in the currently selected channels. flag 9:WZ ! Flagging baselines of antenna 9:WZ in the currently selected channels. flag 10:MA ! Flagging baselines of antenna 10:MA in the currently selected channels. flag 10:NY ! Flagging baselines of antenna 10:NY in the currently selected channels. flag 11:MA ! Flagging baselines of antenna 11:MA in the currently selected channels. flag 11:WZ ! Flagging baselines of antenna 11:WZ in the currently selected channels. flag 12:NY ! Flagging baselines of antenna 12:NY in the currently selected channels. flag 12:WZ ! Flagging baselines of antenna 12:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.195 mas, bmaj=1.853 mas, bpa=46.35 degrees ! Estimated noise=1.75001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62098 Jy ! Component: 100 - total flux cleaned = 2.03578 Jy ! Total flux subtracted in 100 components = 2.03578 Jy ! Clean residual min=-0.086691 max=0.171283 Jy/beam ! Clean residual mean=-0.000383 rms=0.032593 Jy/beam ! Combined flux in latest and established models = 2.03578 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 2.03578 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.335520Jy sigma=11.812891 ! Fit after self-cal, rms=0.336805Jy sigma=12.286600 ! Inverting map and beam ! Estimated beam: bmin=1.211 mas, bmaj=1.937 mas, bpa=44.16 degrees ! Estimated noise=1.75122 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197998 Jy ! Component: 100 - total flux cleaned = 0.305238 Jy ! Total flux subtracted in 100 components = 0.305238 Jy ! Clean residual min=-0.058221 max=0.070247 Jy/beam ! Clean residual mean=-0.000129 rms=0.016579 Jy/beam ! Combined flux in latest and established models = 2.34101 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 2.34101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203399Jy sigma=6.842906 ! Fit after self-cal, rms=0.203440Jy sigma=6.834027 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.422 mas, bmaj=2.08 mas, bpa=45.2 degrees ! Estimated noise=1.48767 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0900016 Jy ! Component: 100 - total flux cleaned = 0.14091 Jy ! Component: 150 - total flux cleaned = 0.170675 Jy ! Component: 200 - total flux cleaned = 0.188462 Jy ! Total flux subtracted in 200 components = 0.188462 Jy ! Clean residual min=-0.071201 max=0.051663 Jy/beam ! Clean residual mean=0.000119 rms=0.015315 Jy/beam ! Combined flux in latest and established models = 2.52948 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 46 components and 2.52948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171123Jy sigma=5.269568 ! Fit after self-cal, rms=0.170934Jy sigma=5.266399 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.12 LA 1.06 NL 0.96 SC 0.97 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 0.99 FT 1.00* HN 0.99 ! KP 0.99 LA 1.03 MA 1.00* NL 0.95 ! NY 1.00* PT 0.99 SC 0.99 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.14 LA 1.02 NL 1.00 SC 0.99 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.97 FD 1.00 FT 1.00* HN 1.03 ! KP 0.94 LA 1.00 MA 1.00* NL 0.96 ! NY 1.00* PT 1.00 SC 1.01 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.20 LA 1.10 NL 1.03 SC 0.94 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.00 FT 1.00* HN 1.06 ! KP 0.86 LA 1.07 MA 1.00* NL 0.99 ! NY 1.00* PT 1.00 SC 1.01 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.21 LA 1.07 NL 1.05 SC 0.99 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! OV 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 1.05 FT 1.00* HN 1.07 ! KP 0.90 LA 1.05 MA 1.00* NL 1.01 ! NY 1.00* PT 1.05 SC 1.03 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! NY 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.170934Jy sigma=5.266399 ! Fit after self-cal, rms=0.065722Jy sigma=1.741740 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.423 mas, bmaj=2.124 mas, bpa=41.3 degrees ! Estimated noise=1.51343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.8, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206571 Jy ! Component: 100 - total flux cleaned = 0.024848 Jy ! Component: 150 - total flux cleaned = 0.0252516 Jy ! Component: 200 - total flux cleaned = 0.0255883 Jy ! Total flux subtracted in 200 components = 0.0255883 Jy ! Clean residual min=-0.012644 max=0.011402 Jy/beam ! Clean residual mean=0.000008 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 2.55506 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 2.55506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057561Jy sigma=1.444367 ! Fit after self-cal, rms=0.057253Jy sigma=1.437173 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057253Jy sigma=1.437173 ! Fit after self-cal, rms=0.056800Jy sigma=1.427779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.424 mas, bmaj=2.124 mas, bpa=41.29 degrees ! Estimated noise=1.51257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394028 Jy ! Component: 100 - total flux cleaned = 0.00472298 Jy ! Component: 150 - total flux cleaned = 0.00494232 Jy ! Component: 200 - total flux cleaned = 0.00515111 Jy ! Total flux subtracted in 200 components = 0.00515111 Jy ! Clean residual min=-0.010813 max=0.010325 Jy/beam ! Clean residual mean=0.000006 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 2.56022 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 2.56022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054235Jy sigma=1.364019 ! Fit after self-cal, rms=0.054106Jy sigma=1.361770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149705 Jy ! Component: 100 - total flux cleaned = 0.00132613 Jy ! Component: 150 - total flux cleaned = 0.00166323 Jy ! Component: 200 - total flux cleaned = 0.00166047 Jy ! Total flux subtracted in 200 components = 0.00166047 Jy ! Clean residual min=-0.010019 max=0.010193 Jy/beam ! Clean residual mean=0.000006 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 2.56188 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 2.56188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052833Jy sigma=1.333237 ! Fit after self-cal, rms=0.052755Jy sigma=1.332427 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052755Jy sigma=1.332427 ! Fit after self-cal, rms=0.052631Jy sigma=1.329397 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.425 mas, bmaj=2.124 mas, bpa=41.3 degrees ! Estimated noise=1.51234 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000858744 Jy ! Component: 100 - total flux cleaned = -0.00115916 Jy ! Component: 150 - total flux cleaned = -0.00115957 Jy ! Component: 200 - total flux cleaned = -0.00129257 Jy ! Total flux subtracted in 200 components = -0.00129257 Jy ! Clean residual min=-0.009278 max=0.010213 Jy/beam ! Clean residual mean=0.000006 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 2.56058 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 2.56058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051648Jy sigma=1.308792 ! Fit after self-cal, rms=0.051569Jy sigma=1.308144 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.8, 29.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117185 Jy ! Component: 100 - total flux cleaned = 0.00233964 Jy ! Component: 150 - total flux cleaned = 0.00335554 Jy ! Component: 200 - total flux cleaned = 0.0038554 Jy ! Total flux subtracted in 200 components = 0.0038554 Jy ! Clean residual min=-0.007935 max=0.006987 Jy/beam ! Clean residual mean=0.000003 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 2.56444 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 2.56444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049351Jy sigma=1.238104 ! Fit after self-cal, rms=0.049307Jy sigma=1.234683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049307Jy sigma=1.234683 ! Fit after self-cal, rms=0.049108Jy sigma=1.230714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=2.898 mas, bpa=-34.36 degrees ! Estimated noise=1.58292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122777 Jy ! Component: 100 - total flux cleaned = -0.00114353 Jy ! Component: 150 - total flux cleaned = -0.000985662 Jy ! Component: 200 - total flux cleaned = -0.000987392 Jy ! Total flux subtracted in 200 components = -0.000987392 Jy ! Clean residual min=-0.007589 max=0.005650 Jy/beam ! Clean residual mean=0.000003 rms=0.001590 Jy/beam ! Combined flux in latest and established models = 2.56345 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 130 components and 2.56345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048727Jy sigma=1.220026 ! Fit after self-cal, rms=0.048628Jy sigma=1.219096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260241 Jy ! Component: 100 - total flux cleaned = 0.000386611 Jy ! Component: 150 - total flux cleaned = 0.00044382 Jy ! Component: 200 - total flux cleaned = 0.000442462 Jy ! Total flux subtracted in 200 components = 0.000442462 Jy ! Clean residual min=-0.007312 max=0.005666 Jy/beam ! Clean residual mean=0.000004 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 2.56389 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 2.56389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048422Jy sigma=1.214480 ! Fit after self-cal, rms=0.048360Jy sigma=1.213982 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:LA,true ! 4:LA self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:MK,true ! 8:MK self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Fit before self-cal, rms=1.063735Jy sigma=13.861477 ! Fit after self-cal, rms=0.670179Jy sigma=3.543232 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:MA self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 9:MA self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:WZ self-cal status=correctable weight=1 ! 10:MA self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 11:MA self-cal status=correctable weight=1 ! 11:WZ self-cal status=correctable weight=1 ! 12:NY self-cal status=correctable weight=1 ! 12:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.670179Jy sigma=3.543232 ! Fit after self-cal, rms=0.667468Jy sigma=3.383906 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.7703 mas, bmaj=1.364 mas, bpa=-10.59 degrees ! Estimated noise=2.19571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247716 Jy ! Component: 100 - total flux cleaned = 0.0373662 Jy ! Component: 150 - total flux cleaned = 0.0373361 Jy ! Component: 200 - total flux cleaned = 0.037202 Jy ! Total flux subtracted in 200 components = 0.037202 Jy ! Clean residual min=-0.051618 max=0.051389 Jy/beam ! Clean residual mean=0.000011 rms=0.009745 Jy/beam ! Combined flux in latest and established models = 2.6011 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 151 components and 2.6011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.510277Jy sigma=2.825548 ! Fit after self-cal, rms=0.512030Jy sigma=2.761016 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.9241 mas, bmaj=1.503 mas, bpa=-10.7 degrees ! Estimated noise=1.67435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0139186 Jy ! Component: 100 - total flux cleaned = -0.0157798 Jy ! Component: 150 - total flux cleaned = -0.0175964 Jy ! Component: 200 - total flux cleaned = -0.0175874 Jy ! Component: 250 - total flux cleaned = -0.0192201 Jy ! Component: 300 - total flux cleaned = -0.0192054 Jy ! Component: 350 - total flux cleaned = -0.0178264 Jy ! Component: 400 - total flux cleaned = -0.0165862 Jy ! Total flux subtracted in 400 components = -0.0165862 Jy ! Clean residual min=-0.027169 max=0.026463 Jy/beam ! Clean residual mean=0.000003 rms=0.006052 Jy/beam ! Combined flux in latest and established models = 2.58451 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 155 components and 2.58451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398660Jy sigma=2.316057 ! Fit after self-cal, rms=0.400018Jy sigma=2.272120 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00246464 Jy ! Component: 100 - total flux cleaned = -0.00244273 Jy ! Component: 150 - total flux cleaned = 7.41629e-05 Jy ! Component: 200 - total flux cleaned = 0.00124767 Jy ! Component: 250 - total flux cleaned = 0.00119187 Jy ! Component: 300 - total flux cleaned = 0.00119006 Jy ! Component: 350 - total flux cleaned = 0.00119216 Jy ! Component: 400 - total flux cleaned = 0.00121452 Jy ! Total flux subtracted in 400 components = 0.00121452 Jy ! Clean residual min=-0.024324 max=0.022952 Jy/beam ! Clean residual mean=0.000006 rms=0.005389 Jy/beam ! Combined flux in latest and established models = 2.58572 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 161 components and 2.58572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329593Jy sigma=2.031493 ! Fit after self-cal, rms=0.330327Jy sigma=2.000957 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 4 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! ! Fit before self-cal, rms=0.877218Jy sigma=13.343412 ! Fit after self-cal, rms=0.315188Jy sigma=1.768264 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.8933 mas, bmaj=1.506 mas, bpa=-11.22 degrees ! Estimated noise=1.65594 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705097 Jy ! Component: 100 - total flux cleaned = 0.00826173 Jy ! Component: 150 - total flux cleaned = 0.00716237 Jy ! Component: 200 - total flux cleaned = 0.00625629 Jy ! Component: 250 - total flux cleaned = 0.00534735 Jy ! Component: 300 - total flux cleaned = 0.0044989 Jy ! Component: 350 - total flux cleaned = 0.00289949 Jy ! Component: 400 - total flux cleaned = 0.00288487 Jy ! Total flux subtracted in 400 components = 0.00288487 Jy ! Clean residual min=-0.018665 max=0.015717 Jy/beam ! Clean residual mean=0.000007 rms=0.003352 Jy/beam ! Combined flux in latest and established models = 2.58861 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 165 components and 2.58861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245828Jy sigma=1.517455 ! Fit after self-cal, rms=0.247023Jy sigma=1.492068 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224297 Jy ! Component: 100 - total flux cleaned = -0.00295925 Jy ! Component: 150 - total flux cleaned = -0.00294115 Jy ! Component: 200 - total flux cleaned = -0.00292796 Jy ! Component: 250 - total flux cleaned = -0.00289646 Jy ! Component: 300 - total flux cleaned = -0.00347134 Jy ! Component: 350 - total flux cleaned = -0.00344354 Jy ! Component: 400 - total flux cleaned = -0.00396265 Jy ! Total flux subtracted in 400 components = -0.00396265 Jy ! Clean residual min=-0.016241 max=0.013703 Jy/beam ! Clean residual mean=0.000005 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 2.58465 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 168 components and 2.58465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210258Jy sigma=1.375090 ! Fit after self-cal, rms=0.211019Jy sigma=1.357031 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211019Jy sigma=1.357031 ! Fit after self-cal, rms=0.209038Jy sigma=1.319834 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.8811 mas, bmaj=1.508 mas, bpa=-11.49 degrees ! Estimated noise=1.64809 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284819 Jy ! Component: 100 - total flux cleaned = 0.00285611 Jy ! Component: 150 - total flux cleaned = 0.00176756 Jy ! Component: 200 - total flux cleaned = 0.0012913 Jy ! Component: 250 - total flux cleaned = 0.000353627 Jy ! Component: 300 - total flux cleaned = -8.40388e-05 Jy ! Component: 350 - total flux cleaned = -0.00051002 Jy ! Component: 400 - total flux cleaned = -0.000910441 Jy ! Total flux subtracted in 400 components = -0.000910441 Jy ! Clean residual min=-0.013219 max=0.011779 Jy/beam ! Clean residual mean=0.000004 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 2.58374 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 171 components and 2.58374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180013Jy sigma=1.230465 ! Fit after self-cal, rms=0.180658Jy sigma=1.220885 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132553 Jy ! Component: 100 - total flux cleaned = -0.000945156 Jy ! Component: 150 - total flux cleaned = -0.00132022 Jy ! Component: 200 - total flux cleaned = -0.00132329 Jy ! Component: 250 - total flux cleaned = -0.00131263 Jy ! Component: 300 - total flux cleaned = -0.00130264 Jy ! Component: 350 - total flux cleaned = -0.00129564 Jy ! Component: 400 - total flux cleaned = -0.00159492 Jy ! Total flux subtracted in 400 components = -0.00159492 Jy ! Clean residual min=-0.010977 max=0.011620 Jy/beam ! Clean residual mean=0.000004 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 2.58214 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 179 components and 2.58214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164385Jy sigma=1.169095 ! Fit after self-cal, rms=0.164772Jy sigma=1.163159 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164772Jy sigma=1.163159 ! Fit after self-cal, rms=0.164564Jy sigma=1.154377 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=2.496 mas, bmaj=2.772 mas, bpa=-58.11 degrees ! Estimated noise=1.55458 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0052344 Jy ! Component: 100 - total flux cleaned = -0.00546108 Jy ! Component: 150 - total flux cleaned = -0.00613484 Jy ! Component: 200 - total flux cleaned = -0.00672311 Jy ! Component: 250 - total flux cleaned = -0.00724816 Jy ! Component: 300 - total flux cleaned = -0.00765701 Jy ! Component: 350 - total flux cleaned = -0.00784159 Jy ! Component: 400 - total flux cleaned = -0.00795533 Jy ! Total flux subtracted in 400 components = -0.00795533 Jy ! Clean residual min=-0.006054 max=0.005032 Jy/beam ! Clean residual mean=0.000003 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 2.57419 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 201 components and 2.57419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163817Jy sigma=1.136871 ! Fit after self-cal, rms=0.163811Jy sigma=1.134063 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.88826e-05 Jy ! Component: 100 - total flux cleaned = -3.3615e-05 Jy ! Component: 150 - total flux cleaned = -8.66626e-05 Jy ! Component: 200 - total flux cleaned = -0.000291174 Jy ! Component: 250 - total flux cleaned = -0.000385536 Jy ! Component: 300 - total flux cleaned = -0.000523818 Jy ! Component: 350 - total flux cleaned = -0.000655379 Jy ! Component: 400 - total flux cleaned = -0.000780985 Jy ! Total flux subtracted in 400 components = -0.000780985 Jy ! Clean residual min=-0.005877 max=0.005016 Jy/beam ! Clean residual mean=0.000002 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 2.57341 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 218 components and 2.57341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163933Jy sigma=1.131091 ! Fit after self-cal, rms=0.163773Jy sigma=1.129574 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.8758 mas, bmaj=1.508 mas, bpa=-11.61 degrees ! Estimated noise=1.64459 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8758 x 1.508 at -11.61 degrees (North through East) ! Clean map min=-0.010073 max=1.8085 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163773Jy sigma=1.129574 ! Fit after self-cal, rms=0.162670Jy sigma=1.066615 ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.876 mas, bmaj=1.508 mas, bpa=-11.6 degrees ! Estimated noise=1.64546 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102196 Jy ! Component: 100 - total flux cleaned = 0.000681959 Jy ! Component: 150 - total flux cleaned = 6.63936e-05 Jy ! Component: 200 - total flux cleaned = 6.00712e-05 Jy ! Component: 250 - total flux cleaned = 5.10623e-05 Jy ! Component: 300 - total flux cleaned = -0.000482852 Jy ! Component: 350 - total flux cleaned = -0.000997155 Jy ! Component: 400 - total flux cleaned = -0.00124831 Jy ! Total flux subtracted in 400 components = -0.00124831 Jy ! Clean residual min=-0.009099 max=0.010431 Jy/beam ! Clean residual mean=0.000002 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 2.57216 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 223 components and 2.57216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149898Jy sigma=1.028653 ! Fit after self-cal, rms=0.150290Jy sigma=1.026669 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Added new window around map position (-4.2, -27.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445263 Jy ! Component: 100 - total flux cleaned = 0.0038596 Jy ! Component: 150 - total flux cleaned = 0.0041191 Jy ! Component: 200 - total flux cleaned = 0.00461672 Jy ! Component: 250 - total flux cleaned = 0.00509236 Jy ! Component: 300 - total flux cleaned = 0.00532034 Jy ! Component: 350 - total flux cleaned = 0.00531492 Jy ! Component: 400 - total flux cleaned = 0.00508806 Jy ! Total flux subtracted in 400 components = 0.00508806 Jy ! Clean residual min=-0.008345 max=0.007297 Jy/beam ! Clean residual mean=-0.000002 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 2.57725 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 244 components and 2.57724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143291Jy sigma=0.985898 ! Fit after self-cal, rms=0.143039Jy sigma=0.983333 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143039Jy sigma=0.983333 ! Fit after self-cal, rms=0.143186Jy sigma=0.980192 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.7292 mas, bmaj=1.376 mas, bpa=-11.54 degrees ! Estimated noise=2.13122 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.49562 Jy ! Component: 100 - total flux cleaned = 2.00303 Jy ! Component: 150 - total flux cleaned = 2.21638 Jy ! Component: 200 - total flux cleaned = 2.32643 Jy ! Component: 250 - total flux cleaned = 2.39597 Jy ! Component: 300 - total flux cleaned = 2.44466 Jy ! Component: 350 - total flux cleaned = 2.47985 Jy ! Component: 400 - total flux cleaned = 2.50613 Jy ! Total flux subtracted in 400 components = 2.50613 Jy ! Clean residual min=-0.015232 max=0.022586 Jy/beam ! Clean residual mean=-0.000036 rms=0.003977 Jy/beam ! Combined flux in latest and established models = 2.50613 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 2.50613 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.874 mas, bmaj=1.509 mas, bpa=-11.64 degrees ! Estimated noise=1.6442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -1.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249688 Jy ! Component: 100 - total flux cleaned = 0.0409639 Jy ! Component: 150 - total flux cleaned = 0.0499296 Jy ! Component: 200 - total flux cleaned = 0.0547838 Jy ! Component: 250 - total flux cleaned = 0.0579633 Jy ! Component: 300 - total flux cleaned = 0.059569 Jy ! Component: 350 - total flux cleaned = 0.0598675 Jy ! Component: 400 - total flux cleaned = 0.0604305 Jy ! Total flux subtracted in 400 components = 0.0604305 Jy ! Clean residual min=-0.009845 max=0.008549 Jy/beam ! Clean residual mean=0.000002 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 2.56656 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 83 components and 2.56656 Jy ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=2.498 mas, bmaj=2.773 mas, bpa=-57.97 degrees ! Estimated noise=1.5547 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246466 Jy ! Component: 100 - total flux cleaned = 0.00358078 Jy ! Component: 150 - total flux cleaned = 0.00308256 Jy ! Component: 200 - total flux cleaned = 0.00262207 Jy ! Component: 250 - total flux cleaned = 0.00194363 Jy ! Component: 300 - total flux cleaned = 0.00122308 Jy ! Component: 350 - total flux cleaned = 0.000669499 Jy ! Component: 400 - total flux cleaned = 0.000253087 Jy ! Total flux subtracted in 400 components = 0.000253087 Jy ! Clean residual min=-0.005287 max=0.004835 Jy/beam ! Clean residual mean=0.000003 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 2.56682 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299085 Jy ! Component: 100 - total flux cleaned = -0.000489856 Jy ! Component: 150 - total flux cleaned = -0.000760394 Jy ! Component: 200 - total flux cleaned = -0.000845395 Jy ! Component: 250 - total flux cleaned = -0.000848024 Jy ! Component: 300 - total flux cleaned = -0.000846325 Jy ! Component: 350 - total flux cleaned = -0.000691567 Jy ! Component: 400 - total flux cleaned = -0.000540899 Jy ! Total flux subtracted in 400 components = -0.000540899 Jy ! Clean residual min=-0.004840 max=0.004452 Jy/beam ! Clean residual mean=0.000001 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 2.56628 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 142 components and 2.56627 Jy ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! Estimated beam: bmin=0.874 mas, bmaj=1.509 mas, bpa=-11.64 degrees ! Estimated noise=1.6442 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00236459 Jy ! Component: 100 - total flux cleaned = -0.00141779 Jy ! Component: 150 - total flux cleaned = -0.000760295 Jy ! Component: 200 - total flux cleaned = -0.000344598 Jy ! Component: 250 - total flux cleaned = -0.000150364 Jy ! Component: 300 - total flux cleaned = 4.30992e-05 Jy ! Component: 350 - total flux cleaned = 0.000411401 Jy ! Component: 400 - total flux cleaned = 0.000590773 Jy ! Total flux subtracted in 400 components = 0.000590773 Jy ! Clean residual min=-0.006932 max=0.006822 Jy/beam ! Clean residual mean=0.000001 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 2.56687 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 161 components and 2.56687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081298Jy sigma=0.890911 ! Fit after self-cal, rms=0.080567Jy sigma=0.875476 wmodel /scr/pima/rdv95_uvs/J2139+1423_X_map.mod ! Writing 161 model components to file: /scr/pima/rdv95_uvs/J2139+1423_X_map.mod wobs /scr/pima/rdv95_uvs/J2139+1423_X_uvs.fits ! Applying 556 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J2139+1423_X_uvs.fits wwins /scr/pima/rdv95_uvs/J2139+1423_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rdv95_uvs/J2139+1423_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109462 Jy ! Component: 100 - total flux cleaned = -0.00291 Jy ! Component: 150 - total flux cleaned = -0.00341234 Jy ! Component: 200 - total flux cleaned = -0.00370228 Jy ! Component: 250 - total flux cleaned = -0.0039827 Jy ! Component: 300 - total flux cleaned = -0.00389386 Jy ! Component: 350 - total flux cleaned = -0.00363036 Jy ! Component: 400 - total flux cleaned = -0.00345964 Jy ! Component: 450 - total flux cleaned = -0.00329285 Jy ! Component: 500 - total flux cleaned = -0.00329273 Jy ! Component: 550 - total flux cleaned = -0.00321324 Jy ! Component: 600 - total flux cleaned = -0.00321404 Jy ! Component: 650 - total flux cleaned = -0.00305938 Jy ! Component: 700 - total flux cleaned = -0.00298178 Jy ! Component: 750 - total flux cleaned = -0.00283091 Jy ! Component: 800 - total flux cleaned = -0.00297721 Jy ! Component: 850 - total flux cleaned = -0.00283149 Jy ! Component: 900 - total flux cleaned = -0.00247531 Jy ! Component: 950 - total flux cleaned = -0.00268842 Jy ! Component: 1000 - total flux cleaned = -0.00289725 Jy ! Component: 1050 - total flux cleaned = -0.00310276 Jy ! Component: 1100 - total flux cleaned = -0.00310318 Jy ! Component: 1150 - total flux cleaned = -0.00350423 Jy ! Component: 1200 - total flux cleaned = -0.0036373 Jy ! Component: 1250 - total flux cleaned = -0.00402765 Jy ! Component: 1300 - total flux cleaned = -0.0046066 Jy ! Component: 1350 - total flux cleaned = -0.00486115 Jy ! Component: 1400 - total flux cleaned = -0.00536541 Jy ! Component: 1450 - total flux cleaned = -0.0057402 Jy ! Component: 1500 - total flux cleaned = -0.00629688 Jy ! Component: 1550 - total flux cleaned = -0.00660381 Jy ! Component: 1600 - total flux cleaned = -0.00684664 Jy ! Component: 1650 - total flux cleaned = -0.00714781 Jy ! Component: 1700 - total flux cleaned = -0.00756477 Jy ! Component: 1750 - total flux cleaned = -0.00780151 Jy ! Component: 1800 - total flux cleaned = -0.00815412 Jy ! Component: 1850 - total flux cleaned = -0.00821221 Jy ! Component: 1900 - total flux cleaned = -0.00878951 Jy ! Component: 1950 - total flux cleaned = -0.00884744 Jy ! Component: 2000 - total flux cleaned = -0.00947341 Jy ! Component: 2050 - total flux cleaned = -0.00975558 Jy ! Component: 2100 - total flux cleaned = -0.0101472 Jy ! Component: 2150 - total flux cleaned = -0.0102593 Jy ! Component: 2200 - total flux cleaned = -0.0107558 Jy ! Component: 2250 - total flux cleaned = -0.0111947 Jy ! Component: 2300 - total flux cleaned = -0.0115755 Jy ! Component: 2350 - total flux cleaned = -0.0120082 Jy ! Component: 2400 - total flux cleaned = -0.0123845 Jy ! Component: 2450 - total flux cleaned = -0.0128648 Jy ! Component: 2500 - total flux cleaned = -0.0134473 Jy ! Component: 2550 - total flux cleaned = -0.0139735 Jy ! Component: 2600 - total flux cleaned = -0.0141823 Jy ! Component: 2650 - total flux cleaned = -0.0146501 Jy ! Component: 2700 - total flux cleaned = -0.0151671 Jy ! Component: 2750 - total flux cleaned = -0.015321 Jy ! Component: 2800 - total flux cleaned = -0.0158315 Jy ! Component: 2850 - total flux cleaned = -0.0161359 Jy ! Component: 2900 - total flux cleaned = -0.0166901 Jy ! Component: 2950 - total flux cleaned = -0.017091 Jy ! Component: 3000 - total flux cleaned = -0.0174895 Jy ! Component: 3050 - total flux cleaned = -0.017935 Jy ! Component: 3100 - total flux cleaned = -0.0184769 Jy ! Component: 3150 - total flux cleaned = -0.01882 Jy ! Component: 3200 - total flux cleaned = -0.0192584 Jy ! Component: 3250 - total flux cleaned = -0.0196463 Jy ! Component: 3300 - total flux cleaned = -0.0200806 Jy ! Component: 3350 - total flux cleaned = -0.0203684 Jy ! Component: 3400 - total flux cleaned = -0.0207029 Jy ! Component: 3450 - total flux cleaned = -0.0209877 Jy ! Component: 3500 - total flux cleaned = -0.0214135 Jy ! Component: 3550 - total flux cleaned = -0.0217425 Jy ! Component: 3600 - total flux cleaned = -0.022117 Jy ! Component: 3650 - total flux cleaned = -0.02249 Jy ! Component: 3700 - total flux cleaned = -0.0228614 Jy ! Component: 3750 - total flux cleaned = -0.0234153 Jy ! Component: 3800 - total flux cleaned = -0.0237373 Jy ! Component: 3850 - total flux cleaned = -0.0240581 Jy ! Component: 3900 - total flux cleaned = -0.0245142 Jy ! Component: 3950 - total flux cleaned = -0.0249683 Jy ! Component: 4000 - total flux cleaned = -0.0254203 Jy ! Component: 4050 - total flux cleaned = -0.0258705 Jy ! Total flux subtracted in 4096 components = -0.0260947 Jy ! Clean residual min=-0.002615 max=0.002495 Jy/beam ! Clean residual mean=-0.000004 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 2.54077 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 422 components and 2.54077 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J2139+1423_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.874 x 1.509 at -11.64 degrees (North through East) ! Clean map min=-0.0083027 max=1.8066 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J2139+1423_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 3.62% of the data. ! The x-axis pixel size should ideally be below 0.1873 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.8065 rms= 0.0007 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J2139+1423_X_uvs.log closed on Wed Nov 6 20:50:18 2013