! Started logfile: /scr/pima/rdv95_uvs/J1419+3821_X_uvs.log on Wed Nov 6 20:47:24 2013 obs /scr/pima/rdv95_uvs/J1419+3821_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J1419+3821_X_uva.fits ! AN table 1: 7 integrations on 6 of 6 possible baselines. ! AN table 2: 11 integrations on 78 of 78 possible baselines. ! AN table 3: 2 integrations on 21 of 21 possible baselines. ! AN table 4: 12 integrations on 3 of 3 possible baselines. ! AN table 5: 2 integrations on 1 of 1 possible baselines. ! AN table 6: 14 integrations on 10 of 10 possible baselines. ! AN table 7: 3 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.517928 visibilities/baseline/integration-bin. ! Found source: J1419+3821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2600 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J1419+3821_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 4:MA self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:FT self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:MA self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! A total of 88 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 46 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 46 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.269061Jy sigma=13.153607 ! Fit after self-cal, rms=0.243450Jy sigma=2.115892 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:MA ! Flagging baselines of antenna 1:MA in the currently selected channels. flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 2:FT ! Flagging baselines of antenna 2:FT in the currently selected channels. flag 2:MA ! Flagging baselines of antenna 2:MA in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 4:MA ! Flagging baselines of antenna 4:MA in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:FT ! Flagging baselines of antenna 6:FT in the currently selected channels. flag 6:MA ! Flagging baselines of antenna 6:MA in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:MA ! Flagging baselines of antenna 7:MA in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8855 mas, bmaj=1.768 mas, bpa=20.16 degrees ! Estimated noise=2.3695 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.640415 Jy ! Component: 100 - total flux cleaned = 0.780296 Jy ! Total flux subtracted in 100 components = 0.780296 Jy ! Clean residual min=-0.016436 max=0.041443 Jy/beam ! Clean residual mean=-0.000023 rms=0.005108 Jy/beam ! Combined flux in latest and established models = 0.780296 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.780296 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 38 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.103182Jy sigma=1.368927 ! Fit after self-cal, rms=0.103075Jy sigma=1.367844 ! Inverting map and beam ! Estimated beam: bmin=0.8855 mas, bmaj=1.768 mas, bpa=20.16 degrees ! Estimated noise=2.3695 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0401113 Jy ! Component: 100 - total flux cleaned = 0.0580358 Jy ! Total flux subtracted in 100 components = 0.0580358 Jy ! Clean residual min=-0.015861 max=0.020522 Jy/beam ! Clean residual mean=0.000014 rms=0.003706 Jy/beam ! Combined flux in latest and established models = 0.838332 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.838332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087050Jy sigma=1.049249 ! Fit after self-cal, rms=0.087041Jy sigma=1.049111 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.087 mas, bmaj=2.087 mas, bpa=17.72 degrees ! Estimated noise=1.86927 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162627 Jy ! Component: 100 - total flux cleaned = 0.0236734 Jy ! Component: 150 - total flux cleaned = 0.0274181 Jy ! Component: 200 - total flux cleaned = 0.0282729 Jy ! Total flux subtracted in 200 components = 0.0282729 Jy ! Clean residual min=-0.015980 max=0.017718 Jy/beam ! Clean residual mean=0.000090 rms=0.003939 Jy/beam ! Combined flux in latest and established models = 0.866605 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.866605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086080Jy sigma=0.991053 ! Fit after self-cal, rms=0.086073Jy sigma=0.990986 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 FT 1.00* HN 1.08 ! KP 1.00 LA 1.00 MA 1.00* MK 0.97 ! NL 0.97 NY 1.00* OV 0.99 PT 0.95 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 KP 1.05 LA 1.13 MK 0.98 ! NY 1.00* OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.03 HN 1.03 KP 1.03 ! LA 1.03 MA 1.00* NL 0.96 NY 1.00* ! PT 1.04 WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 FT 1.00* HN 1.11 ! KP 0.94 LA 0.97 MA 1.00* MK 0.98 ! NL 0.97 NY 1.00* OV 0.98 PT 0.97 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 KP 1.01 LA 1.08 MK 0.99 ! NY 1.00* OV 0.95 PT 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.97 FD 1.00 HN 1.07 KP 1.00 ! LA 1.01 MA 1.00* NL 0.99 NY 1.00* ! PT 1.03 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 FT 1.00* HN 1.18 ! KP 0.86 LA 1.03 MA 1.00* MK 0.98 ! NL 0.99 NY 1.00* OV 1.02 PT 0.97 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 KP 0.88 LA 1.15 MK 0.94 ! NY 1.00* OV 1.07 PT 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 FD 1.01 HN 1.10 KP 0.92 ! LA 1.06 MA 1.00* NL 1.04 NY 1.00* ! PT 1.02 WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 FT 1.00* HN 1.14 ! KP 0.89 LA 1.02 MA 1.00* MK 1.02 ! NL 1.03 NY 1.00* OV 1.00 PT 1.01 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 KP 0.93 LA 1.16 MK 1.02 ! NY 1.00* OV 1.06 PT 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 1.09 HN 1.15 KP 0.95 ! LA 1.07 MA 1.00* NL 1.03 NY 1.00* ! PT 1.08 WZ 1.00* ! ! ! Fit before self-cal, rms=0.086073Jy sigma=0.990986 ! Fit after self-cal, rms=0.057599Jy sigma=0.633105 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.088 mas, bmaj=2.103 mas, bpa=18.32 degrees ! Estimated noise=1.8864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166969 Jy ! Component: 100 - total flux cleaned = 0.00166952 Jy ! Component: 150 - total flux cleaned = 0.00166792 Jy ! Component: 200 - total flux cleaned = 0.00161804 Jy ! Total flux subtracted in 200 components = 0.00161804 Jy ! Clean residual min=-0.005830 max=0.005211 Jy/beam ! Clean residual mean=-0.000007 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.868223 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.868222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057485Jy sigma=0.631316 ! Fit after self-cal, rms=0.057524Jy sigma=0.631147 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057524Jy sigma=0.631147 ! Fit after self-cal, rms=0.057530Jy sigma=0.630950 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.088 mas, bmaj=2.104 mas, bpa=18.31 degrees ! Estimated noise=1.88696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104179 Jy ! Component: 100 - total flux cleaned = 0.00108942 Jy ! Component: 150 - total flux cleaned = 0.00108951 Jy ! Component: 200 - total flux cleaned = 0.00108889 Jy ! Total flux subtracted in 200 components = 0.00108889 Jy ! Clean residual min=-0.005705 max=0.005125 Jy/beam ! Clean residual mean=-0.000008 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.869311 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.869311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057457Jy sigma=0.629953 ! Fit after self-cal, rms=0.057454Jy sigma=0.629912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01667e-07 Jy ! Component: 100 - total flux cleaned = -4.08984e-05 Jy ! Component: 150 - total flux cleaned = -4.23466e-05 Jy ! Component: 200 - total flux cleaned = -7.81316e-05 Jy ! Total flux subtracted in 200 components = -7.81316e-05 Jy ! Clean residual min=-0.005686 max=0.005003 Jy/beam ! Clean residual mean=-0.000009 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.869233 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.869233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057399Jy sigma=0.629395 ! Fit after self-cal, rms=0.057398Jy sigma=0.629366 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057398Jy sigma=0.629366 ! Fit after self-cal, rms=0.057427Jy sigma=0.629253 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.088 mas, bmaj=2.104 mas, bpa=18.32 degrees ! Estimated noise=1.88799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000971872 Jy ! Component: 100 - total flux cleaned = 0.00101085 Jy ! Component: 150 - total flux cleaned = 0.00101114 Jy ! Component: 200 - total flux cleaned = 0.00101069 Jy ! Total flux subtracted in 200 components = 0.00101069 Jy ! Clean residual min=-0.005634 max=0.004952 Jy/beam ! Clean residual mean=-0.000009 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.870244 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.870244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057374Jy sigma=0.628681 ! Fit after self-cal, rms=0.057374Jy sigma=0.628661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.46484e-05 Jy ! Component: 100 - total flux cleaned = 4.53498e-07 Jy ! Component: 150 - total flux cleaned = -5.61244e-07 Jy ! Component: 200 - total flux cleaned = 2.96681e-05 Jy ! Total flux subtracted in 200 components = 2.96681e-05 Jy ! Clean residual min=-0.005616 max=0.004871 Jy/beam ! Clean residual mean=-0.000009 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.870274 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.870274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057331Jy sigma=0.628330 ! Fit after self-cal, rms=0.057333Jy sigma=0.628314 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057333Jy sigma=0.628314 ! Fit after self-cal, rms=0.057348Jy sigma=0.628223 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=2.965 mas, bpa=16.77 degrees ! Estimated noise=2.21038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152147 Jy ! Component: 100 - total flux cleaned = 0.00161823 Jy ! Component: 150 - total flux cleaned = 0.00169239 Jy ! Component: 200 - total flux cleaned = 0.00173782 Jy ! Total flux subtracted in 200 components = 0.00173782 Jy ! Clean residual min=-0.005535 max=0.005925 Jy/beam ! Clean residual mean=-0.000012 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.872011 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.872011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057367Jy sigma=0.628030 ! Fit after self-cal, rms=0.057358Jy sigma=0.627955 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170796 Jy ! Component: 100 - total flux cleaned = 0.000139331 Jy ! Component: 150 - total flux cleaned = 0.000113212 Jy ! Component: 200 - total flux cleaned = 0.000122537 Jy ! Total flux subtracted in 200 components = 0.000122537 Jy ! Clean residual min=-0.005546 max=0.005899 Jy/beam ! Clean residual mean=-0.000011 rms=0.001494 Jy/beam ! Combined flux in latest and established models = 0.872134 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.872134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057377Jy sigma=0.628063 ! Fit after self-cal, rms=0.057374Jy sigma=0.628044 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:BR,true ! 3:BR self-cal status=fixed weight=1 selfant 3:KP,true ! 3:KP self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:MK,true ! 3:MK self-cal status=fixed weight=1 selfant 3:OV,true ! 3:OV self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 23 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 23 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 32 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 28 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 56 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! A total of 28 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 56 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.240173Jy sigma=1.760530 ! Fit after self-cal, rms=0.073165Jy sigma=0.603270 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 4:MA self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:FT self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:MA self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 71 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 71 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 71 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 71 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.073165Jy sigma=0.603270 ! Fit after self-cal, rms=0.072265Jy sigma=0.599494 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6502 mas, bmaj=1.104 mas, bpa=1.206 degrees ! Estimated noise=2.36179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197982 Jy ! Component: 100 - total flux cleaned = 9.09108e-05 Jy ! Component: 150 - total flux cleaned = 0.000336981 Jy ! Component: 200 - total flux cleaned = 0.00055812 Jy ! Total flux subtracted in 200 components = 0.00055812 Jy ! Clean residual min=-0.006445 max=0.005731 Jy/beam ! Clean residual mean=-0.000002 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.872692 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.872692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071854Jy sigma=0.597485 ! Fit after self-cal, rms=0.071532Jy sigma=0.596282 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7611 mas, bmaj=1.27 mas, bpa=-0.666 degrees ! Estimated noise=1.78228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400711 Jy ! Component: 100 - total flux cleaned = 0.000525279 Jy ! Component: 150 - total flux cleaned = 0.000422445 Jy ! Component: 200 - total flux cleaned = 0.000423905 Jy ! Component: 250 - total flux cleaned = 0.000378397 Jy ! Component: 300 - total flux cleaned = 0.000378744 Jy ! Component: 350 - total flux cleaned = 0.00033813 Jy ! Component: 400 - total flux cleaned = 0.000340363 Jy ! Total flux subtracted in 400 components = 0.000340363 Jy ! Clean residual min=-0.004866 max=0.004542 Jy/beam ! Clean residual mean=-0.000001 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.873032 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.873032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071337Jy sigma=0.595287 ! Fit after self-cal, rms=0.071319Jy sigma=0.595190 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129292 Jy ! Component: 100 - total flux cleaned = 9.01454e-05 Jy ! Component: 150 - total flux cleaned = 1.43799e-05 Jy ! Component: 200 - total flux cleaned = 1.44754e-05 Jy ! Component: 250 - total flux cleaned = -2.0025e-05 Jy ! Component: 300 - total flux cleaned = 1.35949e-05 Jy ! Component: 350 - total flux cleaned = -1.92749e-05 Jy ! Component: 400 - total flux cleaned = -1.77319e-05 Jy ! Total flux subtracted in 400 components = -1.77319e-05 Jy ! Clean residual min=-0.004851 max=0.004546 Jy/beam ! Clean residual mean=-0.000001 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.873015 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.873015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071215Jy sigma=0.594747 ! Fit after self-cal, rms=0.071206Jy sigma=0.594698 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 38 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 94 telescope corrections were flagged in sub-array 2. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 38 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 70 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 70 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=0.233745Jy sigma=1.719512 ! Fit after self-cal, rms=0.070778Jy sigma=0.593924 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7597 mas, bmaj=1.269 mas, bpa=-0.6148 degrees ! Estimated noise=1.78235 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000921779 Jy ! Component: 100 - total flux cleaned = 0.000864589 Jy ! Component: 150 - total flux cleaned = 0.000862825 Jy ! Component: 200 - total flux cleaned = 0.000905401 Jy ! Component: 250 - total flux cleaned = 0.000945965 Jy ! Component: 300 - total flux cleaned = 0.000945716 Jy ! Component: 350 - total flux cleaned = 0.000981011 Jy ! Component: 400 - total flux cleaned = 0.000981323 Jy ! Total flux subtracted in 400 components = 0.000981323 Jy ! Clean residual min=-0.004827 max=0.004512 Jy/beam ! Clean residual mean=-0.000000 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.873996 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.873996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070593Jy sigma=0.593033 ! Fit after self-cal, rms=0.070589Jy sigma=0.592998 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.84535e-05 Jy ! Component: 100 - total flux cleaned = 7.81866e-05 Jy ! Component: 150 - total flux cleaned = 7.71274e-05 Jy ! Component: 200 - total flux cleaned = 7.65145e-05 Jy ! Component: 250 - total flux cleaned = 7.62919e-05 Jy ! Component: 300 - total flux cleaned = 7.66812e-05 Jy ! Component: 350 - total flux cleaned = 7.64482e-05 Jy ! Component: 400 - total flux cleaned = 0.000100425 Jy ! Total flux subtracted in 400 components = 0.000100425 Jy ! Clean residual min=-0.004813 max=0.004500 Jy/beam ! Clean residual mean=-0.000000 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.874096 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.874096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070517Jy sigma=0.592716 ! Fit after self-cal, rms=0.070516Jy sigma=0.592694 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070516Jy sigma=0.592694 ! Fit after self-cal, rms=0.070080Jy sigma=0.590924 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7587 mas, bmaj=1.269 mas, bpa=-0.5791 degrees ! Estimated noise=1.78315 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104434 Jy ! Component: 100 - total flux cleaned = 0.00109113 Jy ! Component: 150 - total flux cleaned = 0.00105695 Jy ! Component: 200 - total flux cleaned = 0.000994956 Jy ! Component: 250 - total flux cleaned = 0.00099471 Jy ! Component: 300 - total flux cleaned = 0.000994141 Jy ! Component: 350 - total flux cleaned = 0.000995226 Jy ! Component: 400 - total flux cleaned = 0.00104324 Jy ! Total flux subtracted in 400 components = 0.00104324 Jy ! Clean residual min=-0.004684 max=0.004277 Jy/beam ! Clean residual mean=-0.000003 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.87514 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.87514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069971Jy sigma=0.590407 ! Fit after self-cal, rms=0.069976Jy sigma=0.590387 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.63501e-05 Jy ! Component: 100 - total flux cleaned = 5.72566e-05 Jy ! Component: 150 - total flux cleaned = 5.72294e-05 Jy ! Component: 200 - total flux cleaned = 7.84196e-05 Jy ! Component: 250 - total flux cleaned = 7.84056e-05 Jy ! Component: 300 - total flux cleaned = 9.85448e-05 Jy ! Component: 350 - total flux cleaned = 9.86616e-05 Jy ! Component: 400 - total flux cleaned = 9.88699e-05 Jy ! Total flux subtracted in 400 components = 9.88699e-05 Jy ! Clean residual min=-0.004663 max=0.004287 Jy/beam ! Clean residual mean=-0.000003 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.875239 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.875239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069937Jy sigma=0.590209 ! Fit after self-cal, rms=0.069935Jy sigma=0.590194 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069935Jy sigma=0.590194 ! Fit after self-cal, rms=0.069100Jy sigma=0.582111 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=2.552 mas, bmaj=2.839 mas, bpa=17.79 degrees ! Estimated noise=2.18754 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145462 Jy ! Component: 100 - total flux cleaned = 0.00172764 Jy ! Component: 150 - total flux cleaned = 0.00181254 Jy ! Component: 200 - total flux cleaned = 0.00188087 Jy ! Component: 250 - total flux cleaned = 0.0019231 Jy ! Component: 300 - total flux cleaned = 0.00194803 Jy ! Component: 350 - total flux cleaned = 0.00195888 Jy ! Component: 400 - total flux cleaned = 0.00196899 Jy ! Total flux subtracted in 400 components = 0.00196899 Jy ! Clean residual min=-0.005302 max=0.006248 Jy/beam ! Clean residual mean=-0.000003 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.877208 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.877208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069165Jy sigma=0.582178 ! Fit after self-cal, rms=0.069161Jy sigma=0.582142 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.8, 39). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055851 Jy ! Component: 100 - total flux cleaned = 0.00690082 Jy ! Component: 150 - total flux cleaned = 0.00789454 Jy ! Component: 200 - total flux cleaned = 0.00879611 Jy ! Component: 250 - total flux cleaned = 0.00937478 Jy ! Component: 300 - total flux cleaned = 0.0100261 Jy ! Component: 350 - total flux cleaned = 0.010497 Jy ! Component: 400 - total flux cleaned = 0.011031 Jy ! Total flux subtracted in 400 components = 0.011031 Jy ! Clean residual min=-0.005114 max=0.004093 Jy/beam ! Clean residual mean=0.000011 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.888239 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 144 components and 0.888239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068902Jy sigma=0.578138 ! Fit after self-cal, rms=0.068882Jy sigma=0.577868 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7578 mas, bmaj=1.268 mas, bpa=-0.5447 degrees ! Estimated noise=1.78326 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7578 x 1.268 at -0.5447 degrees (North through East) ! Clean map min=-0.0041234 max=0.81895 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068882Jy sigma=0.577868 ! Fit after self-cal, rms=0.065931Jy sigma=0.539938 ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.758 mas, bmaj=1.268 mas, bpa=-0.5373 degrees ! Estimated noise=1.7834 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538087 Jy ! Component: 100 - total flux cleaned = -0.000203387 Jy ! Component: 150 - total flux cleaned = -1.14887e-05 Jy ! Component: 200 - total flux cleaned = 0.000261571 Jy ! Component: 250 - total flux cleaned = 0.000433734 Jy ! Component: 300 - total flux cleaned = 0.000759217 Jy ! Component: 350 - total flux cleaned = 0.00091316 Jy ! Component: 400 - total flux cleaned = 0.00113585 Jy ! Total flux subtracted in 400 components = 0.00113585 Jy ! Clean residual min=-0.004296 max=0.003595 Jy/beam ! Clean residual mean=0.000007 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.889374 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 199 components and 0.889374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065325Jy sigma=0.534843 ! Fit after self-cal, rms=0.065318Jy sigma=0.534721 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015823 Jy ! Component: 100 - total flux cleaned = 5.37097e-05 Jy ! Component: 150 - total flux cleaned = 0.000190987 Jy ! Component: 200 - total flux cleaned = 0.000388387 Jy ! Component: 250 - total flux cleaned = 0.000453226 Jy ! Component: 300 - total flux cleaned = 0.000578245 Jy ! Component: 350 - total flux cleaned = 0.000758953 Jy ! Component: 400 - total flux cleaned = 0.000875832 Jy ! Total flux subtracted in 400 components = 0.000875832 Jy ! Clean residual min=-0.004185 max=0.003652 Jy/beam ! Clean residual mean=0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.89025 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 234 components and 0.89025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065009Jy sigma=0.532487 ! Fit after self-cal, rms=0.065003Jy sigma=0.532448 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065003Jy sigma=0.532448 ! Fit after self-cal, rms=0.064963Jy sigma=0.532228 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.6477 mas, bmaj=1.102 mas, bpa=1.288 degrees ! Estimated noise=2.36014 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.634957 Jy ! Component: 100 - total flux cleaned = 0.775196 Jy ! Component: 150 - total flux cleaned = 0.821487 Jy ! Component: 200 - total flux cleaned = 0.843114 Jy ! Component: 250 - total flux cleaned = 0.854351 Jy ! Component: 300 - total flux cleaned = 0.858516 Jy ! Component: 350 - total flux cleaned = 0.860585 Jy ! Component: 400 - total flux cleaned = 0.861926 Jy ! Total flux subtracted in 400 components = 0.861926 Jy ! Clean residual min=-0.005901 max=0.005626 Jy/beam ! Clean residual mean=-0.000007 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.861926 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.861926 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7579 mas, bmaj=1.268 mas, bpa=-0.5492 degrees ! Estimated noise=1.78337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -1.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569828 Jy ! Component: 100 - total flux cleaned = 0.0090215 Jy ! Component: 150 - total flux cleaned = 0.0114689 Jy ! Component: 200 - total flux cleaned = 0.0132903 Jy ! Component: 250 - total flux cleaned = 0.0150838 Jy ! Component: 300 - total flux cleaned = 0.0162029 Jy ! Component: 350 - total flux cleaned = 0.017368 Jy ! Component: 400 - total flux cleaned = 0.0184752 Jy ! Total flux subtracted in 400 components = 0.0184752 Jy ! Clean residual min=-0.004181 max=0.003820 Jy/beam ! Clean residual mean=0.000001 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.880401 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 102 components and 0.880401 Jy ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=2.55 mas, bmaj=2.839 mas, bpa=17.81 degrees ! Estimated noise=2.18864 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003564 Jy ! Component: 100 - total flux cleaned = 0.00624788 Jy ! Component: 150 - total flux cleaned = 0.00747595 Jy ! Component: 200 - total flux cleaned = 0.00817076 Jy ! Component: 250 - total flux cleaned = 0.00887231 Jy ! Component: 300 - total flux cleaned = 0.00951602 Jy ! Component: 350 - total flux cleaned = 0.00999354 Jy ! Component: 400 - total flux cleaned = 0.0104398 Jy ! Total flux subtracted in 400 components = 0.0104398 Jy ! Clean residual min=-0.003983 max=0.003894 Jy/beam ! Clean residual mean=0.000019 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.890841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468896 Jy ! Component: 100 - total flux cleaned = 0.000813093 Jy ! Component: 150 - total flux cleaned = 0.00114013 Jy ! Component: 200 - total flux cleaned = 0.00153666 Jy ! Component: 250 - total flux cleaned = 0.00174531 Jy ! Component: 300 - total flux cleaned = 0.00194525 Jy ! Component: 350 - total flux cleaned = 0.00209835 Jy ! Component: 400 - total flux cleaned = 0.00228235 Jy ! Total flux subtracted in 400 components = 0.00228235 Jy ! Clean residual min=-0.003860 max=0.003998 Jy/beam ! Clean residual mean=0.000025 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.893123 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 179 components and 0.893123 Jy ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7579 mas, bmaj=1.268 mas, bpa=-0.5492 degrees ! Estimated noise=1.78337 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000841537 Jy ! Component: 100 - total flux cleaned = -0.00118108 Jy ! Component: 150 - total flux cleaned = -0.00125919 Jy ! Component: 200 - total flux cleaned = -0.00133497 Jy ! Component: 250 - total flux cleaned = -0.00119515 Jy ! Component: 300 - total flux cleaned = -0.001196 Jy ! Component: 350 - total flux cleaned = -0.00106371 Jy ! Component: 400 - total flux cleaned = -0.000934089 Jy ! Total flux subtracted in 400 components = -0.000934089 Jy ! Clean residual min=-0.003821 max=0.003468 Jy/beam ! Clean residual mean=0.000008 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.892189 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 216 components and 0.892189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064766Jy sigma=0.529169 ! Fit after self-cal, rms=0.064686Jy sigma=0.528631 wmodel /scr/pima/rdv95_uvs/J1419+3821_X_map.mod ! Writing 216 model components to file: /scr/pima/rdv95_uvs/J1419+3821_X_map.mod wobs /scr/pima/rdv95_uvs/J1419+3821_X_uvs.fits ! Applying 111 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J1419+3821_X_uvs.fits wwins /scr/pima/rdv95_uvs/J1419+3821_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv95_uvs/J1419+3821_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000968117 Jy ! Component: 100 - total flux cleaned = -0.00128454 Jy ! Component: 150 - total flux cleaned = -0.00140486 Jy ! Component: 200 - total flux cleaned = -0.00111301 Jy ! Component: 250 - total flux cleaned = -0.000830408 Jy ! Component: 300 - total flux cleaned = -0.00039045 Jy ! Component: 350 - total flux cleaned = -0.000175803 Jy ! Component: 400 - total flux cleaned = 0.000245411 Jy ! Component: 450 - total flux cleaned = 0.000608189 Jy ! Component: 500 - total flux cleaned = 0.00106528 Jy ! Component: 550 - total flux cleaned = 0.00131421 Jy ! Component: 600 - total flux cleaned = 0.00155967 Jy ! Component: 650 - total flux cleaned = 0.00175298 Jy ! Component: 700 - total flux cleaned = 0.00208801 Jy ! Component: 750 - total flux cleaned = 0.00241834 Jy ! Component: 800 - total flux cleaned = 0.00274401 Jy ! Component: 850 - total flux cleaned = 0.00297459 Jy ! Component: 900 - total flux cleaned = 0.00324821 Jy ! Component: 950 - total flux cleaned = 0.00365298 Jy ! Component: 1000 - total flux cleaned = 0.00396326 Jy ! Component: 1050 - total flux cleaned = 0.00427084 Jy ! Component: 1100 - total flux cleaned = 0.00461939 Jy ! Component: 1150 - total flux cleaned = 0.004835 Jy ! Component: 1200 - total flux cleaned = 0.0052193 Jy ! Component: 1250 - total flux cleaned = 0.00538874 Jy ! Component: 1300 - total flux cleaned = 0.00564014 Jy ! Component: 1350 - total flux cleaned = 0.00584772 Jy ! Component: 1400 - total flux cleaned = 0.00605401 Jy ! Component: 1450 - total flux cleaned = 0.00617702 Jy ! Component: 1500 - total flux cleaned = 0.00642062 Jy ! Component: 1550 - total flux cleaned = 0.00662175 Jy ! Component: 1600 - total flux cleaned = 0.00682096 Jy ! Component: 1650 - total flux cleaned = 0.00693974 Jy ! Component: 1700 - total flux cleaned = 0.00709685 Jy ! Component: 1750 - total flux cleaned = 0.00725299 Jy ! Component: 1800 - total flux cleaned = 0.00733066 Jy ! Component: 1850 - total flux cleaned = 0.00740763 Jy ! Component: 1900 - total flux cleaned = 0.00748462 Jy ! Component: 1950 - total flux cleaned = 0.00771177 Jy ! Component: 2000 - total flux cleaned = 0.00789944 Jy ! Component: 2050 - total flux cleaned = 0.00793626 Jy ! Component: 2100 - total flux cleaned = 0.00797347 Jy ! Component: 2150 - total flux cleaned = 0.00808383 Jy ! Component: 2200 - total flux cleaned = 0.00819322 Jy ! Component: 2250 - total flux cleaned = 0.00830222 Jy ! Component: 2300 - total flux cleaned = 0.00837419 Jy ! Component: 2350 - total flux cleaned = 0.00851709 Jy ! Component: 2400 - total flux cleaned = 0.00873029 Jy ! Component: 2450 - total flux cleaned = 0.00862441 Jy ! Component: 2500 - total flux cleaned = 0.0087295 Jy ! Component: 2550 - total flux cleaned = 0.00886883 Jy ! Component: 2600 - total flux cleaned = 0.00914572 Jy ! Component: 2650 - total flux cleaned = 0.00924906 Jy ! Component: 2700 - total flux cleaned = 0.00938562 Jy ! Component: 2750 - total flux cleaned = 0.00945363 Jy ! Component: 2800 - total flux cleaned = 0.00972348 Jy ! Component: 2850 - total flux cleaned = 0.00968975 Jy ! Component: 2900 - total flux cleaned = 0.00979012 Jy ! Component: 2950 - total flux cleaned = 0.00982328 Jy ! Component: 3000 - total flux cleaned = 0.00992239 Jy ! Component: 3050 - total flux cleaned = 0.0100205 Jy ! Component: 3100 - total flux cleaned = 0.0102488 Jy ! Component: 3150 - total flux cleaned = 0.0101191 Jy ! Component: 3200 - total flux cleaned = 0.0103447 Jy ! Component: 3250 - total flux cleaned = 0.0103448 Jy ! Component: 3300 - total flux cleaned = 0.0104723 Jy ! Component: 3350 - total flux cleaned = 0.0105356 Jy ! Component: 3400 - total flux cleaned = 0.0105671 Jy ! Component: 3450 - total flux cleaned = 0.0106924 Jy ! Component: 3500 - total flux cleaned = 0.0107548 Jy ! Component: 3550 - total flux cleaned = 0.0107243 Jy ! Component: 3600 - total flux cleaned = 0.0109096 Jy ! Component: 3650 - total flux cleaned = 0.0109405 Jy ! Component: 3700 - total flux cleaned = 0.0109404 Jy ! Component: 3750 - total flux cleaned = 0.0110925 Jy ! Component: 3800 - total flux cleaned = 0.0109716 Jy ! Component: 3850 - total flux cleaned = 0.0111223 Jy ! Component: 3900 - total flux cleaned = 0.0112121 Jy ! Component: 3950 - total flux cleaned = 0.0112421 Jy ! Component: 4000 - total flux cleaned = 0.0113013 Jy ! Component: 4050 - total flux cleaned = 0.011331 Jy ! Total flux subtracted in 4096 components = 0.0113605 Jy ! Clean residual min=-0.001692 max=0.001911 Jy/beam ! Clean residual mean=-0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.903549 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 494 components and 0.90355 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J1419+3821_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7579 x 1.268 at -0.5492 degrees (North through East) ! Clean map min=-0.0033921 max=0.81846 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J1419+3821_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 1.26% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.8184 rms= 0.00047 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J1419+3821_X_uvs.log closed on Wed Nov 6 20:47:31 2013