! Started logfile: /scr/pima/rdv95_uvs/J1043+2408_X_uvs.log on Wed Nov 6 20:46:01 2013 obs /scr/pima/rdv95_uvs/J1043+2408_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J1043+2408_X_uva.fits ! AN table 1: 3 integrations on 55 of 55 possible baselines. ! AN table 2: 33 integrations on 3 of 3 possible baselines. ! AN table 3: 52 integrations on 6 of 6 possible baselines. ! AN table 4: 26 integrations on 15 of 15 possible baselines. ! AN table 5: 2 integrations on 3 of 3 possible baselines. ! AN table 6: 3 integrations on 21 of 21 possible baselines. ! AN table 7: 26 integrations on 55 of 55 possible baselines. ! AN table 8: 26 integrations on 91 of 91 possible baselines. ! Apparent sampling: 0.504036 visibilities/baseline/integration-bin. ! Found source: J1043+2408 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 9740 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J1043+2408_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:MA self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 ! 8:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 3. ! A total of 82 telescope corrections were flagged in sub-array 4. ! A total of 145 telescope corrections were flagged in sub-array 7. ! A total of 199 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 112 telescope corrections were flagged in sub-array 3. ! A total of 82 telescope corrections were flagged in sub-array 4. ! A total of 145 telescope corrections were flagged in sub-array 7. ! A total of 199 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 109 telescope corrections were flagged in sub-array 4. ! A total of 164 telescope corrections were flagged in sub-array 7. ! A total of 234 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 109 telescope corrections were flagged in sub-array 4. ! A total of 164 telescope corrections were flagged in sub-array 7. ! A total of 234 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.386480Jy sigma=16.488420 ! Fit after self-cal, rms=0.182255Jy sigma=1.733768 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 2:MA ! Flagging baselines of antenna 2:MA in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:MA ! Flagging baselines of antenna 3:MA in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:FT ! Flagging baselines of antenna 4:FT in the currently selected channels. flag 4:MA ! Flagging baselines of antenna 4:MA in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:FT ! Flagging baselines of antenna 7:FT in the currently selected channels. flag 7:MA ! Flagging baselines of antenna 7:MA in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 8:FT ! Flagging baselines of antenna 8:FT in the currently selected channels. flag 8:MA ! Flagging baselines of antenna 8:MA in the currently selected channels. flag 8:NY ! Flagging baselines of antenna 8:NY in the currently selected channels. flag 8:WZ ! Flagging baselines of antenna 8:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8563 mas, bmaj=1.511 mas, bpa=0.6653 degrees ! Estimated noise=1.39426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.76689 Jy ! Component: 100 - total flux cleaned = 0.939889 Jy ! Total flux subtracted in 100 components = 0.939889 Jy ! Clean residual min=-0.019830 max=0.060944 Jy/beam ! Clean residual mean=-0.000027 rms=0.005259 Jy/beam ! Combined flux in latest and established models = 0.939889 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.939889 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 69 telescope corrections were flagged in sub-array 2. ! A total of 96 telescope corrections were flagged in sub-array 3. ! A total of 74 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 52 telescope corrections were flagged in sub-array 7. ! A total of 65 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 69 telescope corrections were flagged in sub-array 2. ! A total of 96 telescope corrections were flagged in sub-array 3. ! A total of 74 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 52 telescope corrections were flagged in sub-array 7. ! A total of 65 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 33 telescope corrections were flagged in sub-array 7. ! A total of 30 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 33 telescope corrections were flagged in sub-array 7. ! A total of 30 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.132406Jy sigma=1.934871 ! Fit after self-cal, rms=0.132557Jy sigma=1.946032 ! Inverting map and beam ! Estimated beam: bmin=0.8519 mas, bmaj=1.524 mas, bpa=1.071 degrees ! Estimated noise=1.38696 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627331 Jy ! Component: 100 - total flux cleaned = 0.0902836 Jy ! Total flux subtracted in 100 components = 0.0902836 Jy ! Clean residual min=-0.012551 max=0.018315 Jy/beam ! Clean residual mean=0.000005 rms=0.003170 Jy/beam ! Combined flux in latest and established models = 1.03017 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 1.03017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101127Jy sigma=1.273475 ! Fit after self-cal, rms=0.100871Jy sigma=1.270645 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.087 mas, bmaj=1.85 mas, bpa=3.235 degrees ! Estimated noise=0.913041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214061 Jy ! Component: 100 - total flux cleaned = 0.0305961 Jy ! Component: 150 - total flux cleaned = 0.0354121 Jy ! Component: 200 - total flux cleaned = 0.0380883 Jy ! Total flux subtracted in 200 components = 0.0380883 Jy ! Clean residual min=-0.011212 max=0.017066 Jy/beam ! Clean residual mean=0.000062 rms=0.003064 Jy/beam ! Combined flux in latest and established models = 1.06826 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 1.06826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099488Jy sigma=1.166152 ! Fit after self-cal, rms=0.099420Jy sigma=1.165519 ! Inverting map ! Added new window around map position (49.8, -16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151069 Jy ! Component: 100 - total flux cleaned = 0.0183069 Jy ! Component: 150 - total flux cleaned = 0.0182863 Jy ! Component: 200 - total flux cleaned = 0.0181376 Jy ! Total flux subtracted in 200 components = 0.0181376 Jy ! Clean residual min=-0.010529 max=0.013037 Jy/beam ! Clean residual mean=0.000040 rms=0.002766 Jy/beam ! Combined flux in latest and established models = 1.0864 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 1.0864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096859Jy sigma=1.132139 ! Fit after self-cal, rms=0.096614Jy sigma=1.127428 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.06 KP 1.03 ! LA 1.02 MK 0.97 NL 0.98 NY 1.00* ! OV 1.01 PT 1.00 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.03 HN 1.05 LA 1.09 NL 1.01 ! PT 1.03 SC 0.97 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 1.00 FT 1.00* HN 1.03 ! LA 1.03 MA 1.00* NL 0.96 NY 1.00* ! PT 1.00 SC 0.96 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.97 FD 1.00 FT 1.00* HN 1.08 ! KP 1.05 LA 1.02 MA 1.00* MK 0.98 ! NL 0.98 NY 1.00* OV 0.98 PT 0.97 ! SC 0.99 WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.12 KP 0.96 ! LA 0.99 MK 0.98 NL 0.99 NY 1.00* ! OV 1.00 PT 0.99 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.04 HN 1.09 LA 1.07 NL 1.01 ! PT 1.02 SC 1.00 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 1.00 FT 1.00* HN 1.05 ! LA 0.99 MA 1.00* NL 0.97 NY 1.00* ! PT 0.99 SC 0.99 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.98 FD 1.00 FT 1.00* HN 1.18 ! KP 0.98 LA 0.99 MA 1.00* MK 0.98 ! NL 0.97 NY 1.00* OV 0.97 PT 0.99 ! SC 1.02 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.12 KP 0.88 ! LA 1.03 MK 0.98 NL 1.00 NY 1.00* ! OV 1.06 PT 0.98 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 HN 1.12 LA 1.11 NL 1.01 ! PT 1.01 SC 0.99 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 FD 0.99 FT 1.00* HN 1.08 ! LA 1.05 MA 1.00* NL 0.97 NY 1.00* ! PT 1.01 SC 0.96 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 FD 0.99 FT 1.00* HN 1.22 ! KP 0.89 LA 1.03 MA 1.00* MK 0.97 ! NL 0.96 NY 1.00* OV 0.99 PT 0.97 ! SC 0.99 WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.14 KP 0.92 ! LA 1.04 MK 1.00 NL 1.02 NY 1.00* ! OV 1.02 PT 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* MA 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HN 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.04 HN 1.09 LA 1.08 NL 1.06 ! PT 1.07 SC 1.01 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 FD 1.04 FT 1.00* HN 1.07 ! LA 1.04 MA 1.00* NL 1.00 NY 1.00* ! PT 1.05 SC 0.98 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 FD 1.02 FT 1.00* HN 1.27 ! KP 0.93 LA 1.01 MA 1.00* MK 0.99 ! NL 0.99 NY 1.00* OV 0.98 PT 0.99 ! SC 1.00 WZ 1.00* ! ! ! Fit before self-cal, rms=0.096614Jy sigma=1.127428 ! Fit after self-cal, rms=0.072161Jy sigma=0.791693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.086 mas, bmaj=1.848 mas, bpa=3.925 degrees ! Estimated noise=0.920956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00496243 Jy ! Component: 100 - total flux cleaned = -0.00606346 Jy ! Component: 150 - total flux cleaned = -0.00682291 Jy ! Component: 200 - total flux cleaned = -0.0071639 Jy ! Total flux subtracted in 200 components = -0.0071639 Jy ! Clean residual min=-0.004241 max=0.004497 Jy/beam ! Clean residual mean=-0.000013 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 1.07923 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 1.07923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071686Jy sigma=0.784273 ! Fit after self-cal, rms=0.071654Jy sigma=0.783300 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071654Jy sigma=0.783300 ! Fit after self-cal, rms=0.071613Jy sigma=0.781583 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.086 mas, bmaj=1.849 mas, bpa=3.946 degrees ! Estimated noise=0.920505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0027932 Jy ! Component: 100 - total flux cleaned = -0.0034779 Jy ! Component: 150 - total flux cleaned = -0.00396523 Jy ! Component: 200 - total flux cleaned = -0.00417369 Jy ! Total flux subtracted in 200 components = -0.00417369 Jy ! Clean residual min=-0.003971 max=0.004452 Jy/beam ! Clean residual mean=-0.000012 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 1.07506 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 1.07506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071414Jy sigma=0.778424 ! Fit after self-cal, rms=0.071376Jy sigma=0.778065 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.2, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365785 Jy ! Component: 100 - total flux cleaned = 0.00381958 Jy ! Component: 150 - total flux cleaned = 0.00381921 Jy ! Component: 200 - total flux cleaned = 0.00387867 Jy ! Total flux subtracted in 200 components = 0.00387867 Jy ! Clean residual min=-0.003765 max=0.003362 Jy/beam ! Clean residual mean=-0.000005 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 1.07894 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 1.07894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071136Jy sigma=0.773841 ! Fit after self-cal, rms=0.071115Jy sigma=0.773574 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071115Jy sigma=0.773574 ! Fit after self-cal, rms=0.071103Jy sigma=0.772530 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.086 mas, bmaj=1.849 mas, bpa=3.977 degrees ! Estimated noise=0.920084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786135 Jy ! Component: 100 - total flux cleaned = -0.000786813 Jy ! Component: 150 - total flux cleaned = -0.000896455 Jy ! Component: 200 - total flux cleaned = -0.000944993 Jy ! Total flux subtracted in 200 components = -0.000944993 Jy ! Clean residual min=-0.003696 max=0.003306 Jy/beam ! Clean residual mean=-0.000007 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 1.07799 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 1.07799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070992Jy sigma=0.770699 ! Fit after self-cal, rms=0.070975Jy sigma=0.770563 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167295 Jy ! Component: 100 - total flux cleaned = -7.44914e-05 Jy ! Component: 150 - total flux cleaned = -7.32546e-05 Jy ! Component: 200 - total flux cleaned = -7.37239e-05 Jy ! Total flux subtracted in 200 components = -7.37239e-05 Jy ! Clean residual min=-0.003677 max=0.003211 Jy/beam ! Clean residual mean=-0.000005 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 1.07792 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 1.07792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070921Jy sigma=0.769743 ! Fit after self-cal, rms=0.070910Jy sigma=0.769704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070910Jy sigma=0.769704 ! Fit after self-cal, rms=0.070920Jy sigma=0.769350 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=2.824 mas, bpa=-13.57 degrees ! Estimated noise=1.04866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570506 Jy ! Component: 100 - total flux cleaned = -0.000528111 Jy ! Component: 150 - total flux cleaned = -0.00053407 Jy ! Component: 200 - total flux cleaned = -0.000634866 Jy ! Total flux subtracted in 200 components = -0.000634866 Jy ! Clean residual min=-0.003259 max=0.003443 Jy/beam ! Clean residual mean=-0.000008 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 1.07729 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 1.07729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070908Jy sigma=0.768779 ! Fit after self-cal, rms=0.070901Jy sigma=0.768704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145787 Jy ! Component: 100 - total flux cleaned = -0.000208007 Jy ! Component: 150 - total flux cleaned = -0.000265816 Jy ! Component: 200 - total flux cleaned = -0.00029401 Jy ! Total flux subtracted in 200 components = -0.00029401 Jy ! Clean residual min=-0.003204 max=0.003428 Jy/beam ! Clean residual mean=-0.000005 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 1.07699 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 100 components and 1.07699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070894Jy sigma=0.768436 ! Fit after self-cal, rms=0.070884Jy sigma=0.768386 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:MK,true ! 8:MK self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 8:SC,true ! 8:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 56 telescope corrections were flagged in sub-array 7. ! A total of 62 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 68 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 56 telescope corrections were flagged in sub-array 7. ! A total of 62 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 82 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 74 telescope corrections were flagged in sub-array 7. ! A total of 80 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 82 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 74 telescope corrections were flagged in sub-array 7. ! A total of 80 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.276051Jy sigma=2.202005 ! Fit after self-cal, rms=0.088272Jy sigma=0.737735 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:MA self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 ! 8:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 92 telescope corrections were flagged in sub-array 7. ! A total of 158 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 92 telescope corrections were flagged in sub-array 7. ! A total of 158 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 93 telescope corrections were flagged in sub-array 7. ! A total of 160 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 93 telescope corrections were flagged in sub-array 7. ! A total of 160 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.088272Jy sigma=0.737735 ! Fit after self-cal, rms=0.087064Jy sigma=0.730840 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.5818 mas, bmaj=1.198 mas, bpa=-8.231 degrees ! Estimated noise=1.26596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00068662 Jy ! Component: 100 - total flux cleaned = -0.00124066 Jy ! Component: 150 - total flux cleaned = -0.00161297 Jy ! Component: 200 - total flux cleaned = -0.00162304 Jy ! Total flux subtracted in 200 components = -0.00162304 Jy ! Clean residual min=-0.004092 max=0.004269 Jy/beam ! Clean residual mean=-0.000001 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 1.07537 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 117 components and 1.07537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086596Jy sigma=0.727730 ! Fit after self-cal, rms=0.085952Jy sigma=0.724191 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (47, 43.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016701 Jy ! Component: 100 - total flux cleaned = 0.000820785 Jy ! Component: 150 - total flux cleaned = 0.000709533 Jy ! Component: 200 - total flux cleaned = 0.000712615 Jy ! Total flux subtracted in 200 components = 0.000712615 Jy ! Clean residual min=-0.004044 max=0.004350 Jy/beam ! Clean residual mean=-0.000001 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 1.07608 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 129 components and 1.07608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085662Jy sigma=0.722034 ! Fit after self-cal, rms=0.085595Jy sigma=0.721802 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Added new window around map position (-44.6, 44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284686 Jy ! Component: 100 - total flux cleaned = 0.00354669 Jy ! Component: 150 - total flux cleaned = 0.00318354 Jy ! Component: 200 - total flux cleaned = 0.00301386 Jy ! Total flux subtracted in 200 components = 0.00301386 Jy ! Clean residual min=-0.003969 max=0.003761 Jy/beam ! Clean residual mean=-0.000001 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 1.07909 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 147 components and 1.07909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085421Jy sigma=0.720781 ! Fit after self-cal, rms=0.085366Jy sigma=0.720639 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6842 mas, bmaj=1.41 mas, bpa=-7.551 degrees ! Estimated noise=0.843155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.76072e-05 Jy ! Component: 100 - total flux cleaned = -8.60459e-05 Jy ! Component: 150 - total flux cleaned = -1.42017e-05 Jy ! Component: 200 - total flux cleaned = -0.000145242 Jy ! Component: 250 - total flux cleaned = -0.000203561 Jy ! Component: 300 - total flux cleaned = -0.000146932 Jy ! Component: 350 - total flux cleaned = -0.000256217 Jy ! Component: 400 - total flux cleaned = -0.000255937 Jy ! Total flux subtracted in 400 components = -0.000255937 Jy ! Clean residual min=-0.003077 max=0.002987 Jy/beam ! Clean residual mean=-0.000002 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 1.07884 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 178 components and 1.07884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085025Jy sigma=0.718284 ! Fit after self-cal, rms=0.084959Jy sigma=0.718078 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125852 Jy ! Component: 100 - total flux cleaned = -0.000126424 Jy ! Component: 150 - total flux cleaned = -7.68489e-05 Jy ! Component: 200 - total flux cleaned = -7.88766e-05 Jy ! Component: 250 - total flux cleaned = -0.000124689 Jy ! Component: 300 - total flux cleaned = -8.20001e-05 Jy ! Component: 350 - total flux cleaned = -0.000124886 Jy ! Component: 400 - total flux cleaned = -0.000124535 Jy ! Total flux subtracted in 400 components = -0.000124535 Jy ! Clean residual min=-0.003055 max=0.002956 Jy/beam ! Clean residual mean=-0.000002 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 1.07871 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 191 components and 1.07871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084761Jy sigma=0.716784 ! Fit after self-cal, rms=0.084720Jy sigma=0.716669 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 97 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 148 telescope corrections were flagged in sub-array 7. ! A total of 220 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 97 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 148 telescope corrections were flagged in sub-array 7. ! A total of 220 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 112 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 167 telescope corrections were flagged in sub-array 7. ! A total of 240 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 99 telescope corrections were flagged in sub-array 2. ! A total of 208 telescope corrections were flagged in sub-array 3. ! A total of 112 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 167 telescope corrections were flagged in sub-array 7. ! A total of 240 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.269238Jy sigma=2.096565 ! Fit after self-cal, rms=0.084750Jy sigma=0.715478 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6844 mas, bmaj=1.411 mas, bpa=-7.472 degrees ! Estimated noise=0.84377 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00069061 Jy ! Component: 100 - total flux cleaned = -0.00069254 Jy ! Component: 150 - total flux cleaned = -0.000692135 Jy ! Component: 200 - total flux cleaned = -0.000738634 Jy ! Component: 250 - total flux cleaned = -0.000736145 Jy ! Component: 300 - total flux cleaned = -0.000654848 Jy ! Component: 350 - total flux cleaned = -0.000655132 Jy ! Component: 400 - total flux cleaned = -0.000617038 Jy ! Total flux subtracted in 400 components = -0.000617038 Jy ! Clean residual min=-0.002985 max=0.002963 Jy/beam ! Clean residual mean=-0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 1.0781 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 196 components and 1.0781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084497Jy sigma=0.713930 ! Fit after self-cal, rms=0.084457Jy sigma=0.713807 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.3925e-05 Jy ! Component: 100 - total flux cleaned = 5.97125e-06 Jy ! Component: 150 - total flux cleaned = -2.94133e-05 Jy ! Component: 200 - total flux cleaned = -3.00171e-05 Jy ! Component: 250 - total flux cleaned = -9.84802e-05 Jy ! Component: 300 - total flux cleaned = -0.000164166 Jy ! Component: 350 - total flux cleaned = -0.000132233 Jy ! Component: 400 - total flux cleaned = -0.000194311 Jy ! Total flux subtracted in 400 components = -0.000194311 Jy ! Clean residual min=-0.002988 max=0.002940 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 1.0779 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 211 components and 1.0779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084337Jy sigma=0.713074 ! Fit after self-cal, rms=0.084310Jy sigma=0.713001 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084310Jy sigma=0.713001 ! Fit after self-cal, rms=0.084395Jy sigma=0.712686 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6845 mas, bmaj=1.411 mas, bpa=-7.422 degrees ! Estimated noise=0.844239 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262078 Jy ! Component: 100 - total flux cleaned = -0.000262301 Jy ! Component: 150 - total flux cleaned = -0.000335413 Jy ! Component: 200 - total flux cleaned = -0.000404556 Jy ! Component: 250 - total flux cleaned = -0.000468425 Jy ! Component: 300 - total flux cleaned = -0.000468429 Jy ! Component: 350 - total flux cleaned = -0.000497838 Jy ! Component: 400 - total flux cleaned = -0.000497639 Jy ! Total flux subtracted in 400 components = -0.000497639 Jy ! Clean residual min=-0.002932 max=0.002934 Jy/beam ! Clean residual mean=-0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 1.0774 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 218 components and 1.0774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084254Jy sigma=0.711849 ! Fit after self-cal, rms=0.084230Jy sigma=0.711787 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.45751e-05 Jy ! Component: 100 - total flux cleaned = -7.48095e-05 Jy ! Component: 150 - total flux cleaned = -0.000102914 Jy ! Component: 200 - total flux cleaned = -7.54285e-05 Jy ! Component: 250 - total flux cleaned = -0.000103072 Jy ! Component: 300 - total flux cleaned = -0.000102719 Jy ! Component: 350 - total flux cleaned = -7.61332e-05 Jy ! Component: 400 - total flux cleaned = -7.65797e-05 Jy ! Total flux subtracted in 400 components = -7.65797e-05 Jy ! Clean residual min=-0.002928 max=0.002928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 1.07733 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 228 components and 1.07733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084158Jy sigma=0.711342 ! Fit after self-cal, rms=0.084139Jy sigma=0.711299 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084139Jy sigma=0.711299 ! Fit after self-cal, rms=0.081573Jy sigma=0.693641 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=2.453 mas, bmaj=2.702 mas, bpa=-14.91 degrees ! Estimated noise=1.03712 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342345 Jy ! Component: 100 - total flux cleaned = 0.000806576 Jy ! Component: 150 - total flux cleaned = 0.00112331 Jy ! Component: 200 - total flux cleaned = 0.00125757 Jy ! Component: 250 - total flux cleaned = 0.00131829 Jy ! Component: 300 - total flux cleaned = 0.00131855 Jy ! Component: 350 - total flux cleaned = 0.00126739 Jy ! Component: 400 - total flux cleaned = 0.00122033 Jy ! Total flux subtracted in 400 components = 0.00122033 Jy ! Clean residual min=-0.003135 max=0.002947 Jy/beam ! Clean residual mean=0.000002 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 1.07855 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 238 components and 1.07855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081633Jy sigma=0.693808 ! Fit after self-cal, rms=0.081620Jy sigma=0.693742 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111134 Jy ! Component: 100 - total flux cleaned = 6.03879e-05 Jy ! Component: 150 - total flux cleaned = 1.34111e-05 Jy ! Component: 200 - total flux cleaned = -9.19425e-06 Jy ! Component: 250 - total flux cleaned = -1.01535e-05 Jy ! Component: 300 - total flux cleaned = -3.04777e-05 Jy ! Component: 350 - total flux cleaned = -3.05214e-05 Jy ! Component: 400 - total flux cleaned = -4.93258e-05 Jy ! Total flux subtracted in 400 components = -4.93258e-05 Jy ! Clean residual min=-0.003154 max=0.002850 Jy/beam ! Clean residual mean=0.000004 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 1.0785 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 247 components and 1.0785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081666Jy sigma=0.693987 ! Fit after self-cal, rms=0.081650Jy sigma=0.693947 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6846 mas, bmaj=1.411 mas, bpa=-7.385 degrees ! Estimated noise=0.844551 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6846 x 1.411 at -7.385 degrees (North through East) ! Clean map min=-0.0028505 max=0.96105 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081650Jy sigma=0.693947 ! Fit after self-cal, rms=0.077224Jy sigma=0.648684 ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6845 mas, bmaj=1.411 mas, bpa=-7.393 degrees ! Estimated noise=0.844585 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.67677e-05 Jy ! Component: 100 - total flux cleaned = 9.89214e-05 Jy ! Component: 150 - total flux cleaned = -1.65574e-05 Jy ! Component: 200 - total flux cleaned = -0.000127019 Jy ! Component: 250 - total flux cleaned = -0.000263359 Jy ! Component: 300 - total flux cleaned = -0.000295526 Jy ! Component: 350 - total flux cleaned = -0.000386935 Jy ! Component: 400 - total flux cleaned = -0.000387244 Jy ! Total flux subtracted in 400 components = -0.000387244 Jy ! Clean residual min=-0.002861 max=0.002793 Jy/beam ! Clean residual mean=-0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 1.07811 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 256 components and 1.07811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077108Jy sigma=0.647968 ! Fit after self-cal, rms=0.077099Jy sigma=0.647932 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.79094e-05 Jy ! Component: 100 - total flux cleaned = -0.000117863 Jy ! Component: 150 - total flux cleaned = -0.00014586 Jy ! Component: 200 - total flux cleaned = -0.00014554 Jy ! Component: 250 - total flux cleaned = -0.000145472 Jy ! Component: 300 - total flux cleaned = -0.00017111 Jy ! Component: 350 - total flux cleaned = -0.000145785 Jy ! Component: 400 - total flux cleaned = -0.000196202 Jy ! Total flux subtracted in 400 components = -0.000196202 Jy ! Clean residual min=-0.002868 max=0.002794 Jy/beam ! Clean residual mean=-0.000001 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 1.07792 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 265 components and 1.07792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077037Jy sigma=0.647576 ! Fit after self-cal, rms=0.077028Jy sigma=0.647555 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077028Jy sigma=0.647555 ! Fit after self-cal, rms=0.077070Jy sigma=0.647440 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.5819 mas, bmaj=1.198 mas, bpa=-8.053 degrees ! Estimated noise=1.26889 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.737937 Jy ! Component: 100 - total flux cleaned = 0.911314 Jy ! Component: 150 - total flux cleaned = 0.985787 Jy ! Component: 200 - total flux cleaned = 1.02245 Jy ! Component: 250 - total flux cleaned = 1.04073 Jy ! Component: 300 - total flux cleaned = 1.04991 Jy ! Component: 350 - total flux cleaned = 1.05566 Jy ! Component: 400 - total flux cleaned = 1.06015 Jy ! Total flux subtracted in 400 components = 1.06015 Jy ! Clean residual min=-0.004183 max=0.004621 Jy/beam ! Clean residual mean=-0.000004 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 1.06015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.06015 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6845 mas, bmaj=1.411 mas, bpa=-7.37 degrees ! Estimated noise=0.8449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649951 Jy ! Component: 100 - total flux cleaned = 0.0106255 Jy ! Component: 150 - total flux cleaned = 0.0127573 Jy ! Component: 200 - total flux cleaned = 0.0141227 Jy ! Component: 250 - total flux cleaned = 0.0147859 Jy ! Component: 300 - total flux cleaned = 0.01522 Jy ! Component: 350 - total flux cleaned = 0.0155412 Jy ! Component: 400 - total flux cleaned = 0.0156904 Jy ! Total flux subtracted in 400 components = 0.0156904 Jy ! Clean residual min=-0.002940 max=0.002702 Jy/beam ! Clean residual mean=-0.000004 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 1.07584 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 84 components and 1.07584 Jy ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=2.452 mas, bmaj=2.702 mas, bpa=-14.93 degrees ! Estimated noise=1.03779 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139705 Jy ! Component: 100 - total flux cleaned = 0.00220341 Jy ! Component: 150 - total flux cleaned = 0.00252481 Jy ! Component: 200 - total flux cleaned = 0.00275064 Jy ! Component: 250 - total flux cleaned = 0.00280241 Jy ! Component: 300 - total flux cleaned = 0.00280166 Jy ! Component: 350 - total flux cleaned = 0.0028461 Jy ! Component: 400 - total flux cleaned = 0.002887 Jy ! Total flux subtracted in 400 components = 0.002887 Jy ! Clean residual min=-0.002914 max=0.002751 Jy/beam ! Clean residual mean=-0.000003 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 1.07873 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.82216e-05 Jy ! Component: 100 - total flux cleaned = 0.00015266 Jy ! Component: 150 - total flux cleaned = 0.000256926 Jy ! Component: 200 - total flux cleaned = 0.00025686 Jy ! Component: 250 - total flux cleaned = 0.00028864 Jy ! Component: 300 - total flux cleaned = 0.000319061 Jy ! Component: 350 - total flux cleaned = 0.000319511 Jy ! Component: 400 - total flux cleaned = 0.00031891 Jy ! Total flux subtracted in 400 components = 0.00031891 Jy ! Clean residual min=-0.002907 max=0.002705 Jy/beam ! Clean residual mean=-0.000001 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 1.07905 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 151 components and 1.07905 Jy ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! Estimated beam: bmin=0.6845 mas, bmaj=1.411 mas, bpa=-7.37 degrees ! Estimated noise=0.8449 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117952 Jy ! Component: 100 - total flux cleaned = -0.00130167 Jy ! Component: 150 - total flux cleaned = -0.00153342 Jy ! Component: 200 - total flux cleaned = -0.00158821 Jy ! Component: 250 - total flux cleaned = -0.00158701 Jy ! Component: 300 - total flux cleaned = -0.00148677 Jy ! Component: 350 - total flux cleaned = -0.00143836 Jy ! Component: 400 - total flux cleaned = -0.0012971 Jy ! Total flux subtracted in 400 components = -0.0012971 Jy ! Clean residual min=-0.002628 max=0.002614 Jy/beam ! Clean residual mean=0.000000 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.07775 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 178 components and 1.07775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076502Jy sigma=0.644615 ! Fit after self-cal, rms=0.076437Jy sigma=0.643689 wmodel /scr/pima/rdv95_uvs/J1043+2408_X_map.mod ! Writing 178 model components to file: /scr/pima/rdv95_uvs/J1043+2408_X_map.mod wobs /scr/pima/rdv95_uvs/J1043+2408_X_uvs.fits ! Applying 49 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J1043+2408_X_uvs.fits wwins /scr/pima/rdv95_uvs/J1043+2408_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rdv95_uvs/J1043+2408_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633926 Jy ! Component: 100 - total flux cleaned = -0.00126211 Jy ! Component: 150 - total flux cleaned = -0.00165043 Jy ! Component: 200 - total flux cleaned = -0.00185956 Jy ! Component: 250 - total flux cleaned = -0.00202195 Jy ! Component: 300 - total flux cleaned = -0.00214188 Jy ! Component: 350 - total flux cleaned = -0.00229792 Jy ! Component: 400 - total flux cleaned = -0.00241192 Jy ! Component: 450 - total flux cleaned = -0.00248719 Jy ! Component: 500 - total flux cleaned = -0.0024866 Jy ! Component: 550 - total flux cleaned = -0.00252371 Jy ! Component: 600 - total flux cleaned = -0.00256019 Jy ! Component: 650 - total flux cleaned = -0.00266725 Jy ! Component: 700 - total flux cleaned = -0.00270251 Jy ! Component: 750 - total flux cleaned = -0.00273772 Jy ! Component: 800 - total flux cleaned = -0.00297784 Jy ! Component: 850 - total flux cleaned = -0.00294364 Jy ! Component: 900 - total flux cleaned = -0.00314574 Jy ! Component: 950 - total flux cleaned = -0.00317911 Jy ! Component: 1000 - total flux cleaned = -0.00340997 Jy ! Component: 1050 - total flux cleaned = -0.00334406 Jy ! Component: 1100 - total flux cleaned = -0.00347357 Jy ! Component: 1150 - total flux cleaned = -0.00340972 Jy ! Component: 1200 - total flux cleaned = -0.00353721 Jy ! Component: 1250 - total flux cleaned = -0.00356916 Jy ! Component: 1300 - total flux cleaned = -0.00347543 Jy ! Component: 1350 - total flux cleaned = -0.00372447 Jy ! Component: 1400 - total flux cleaned = -0.00369349 Jy ! Component: 1450 - total flux cleaned = -0.00363217 Jy ! Component: 1500 - total flux cleaned = -0.00378502 Jy ! Component: 1550 - total flux cleaned = -0.00381513 Jy ! Component: 1600 - total flux cleaned = -0.00384542 Jy ! Component: 1650 - total flux cleaned = -0.00387512 Jy ! Component: 1700 - total flux cleaned = -0.00390449 Jy ! Component: 1750 - total flux cleaned = -0.00387521 Jy ! Component: 1800 - total flux cleaned = -0.00387542 Jy ! Component: 1850 - total flux cleaned = -0.00390474 Jy ! Component: 1900 - total flux cleaned = -0.00399188 Jy ! Component: 1950 - total flux cleaned = -0.00390512 Jy ! Component: 2000 - total flux cleaned = -0.00410552 Jy ! Component: 2050 - total flux cleaned = -0.00413394 Jy ! Component: 2100 - total flux cleaned = -0.00407743 Jy ! Component: 2150 - total flux cleaned = -0.00416221 Jy ! Component: 2200 - total flux cleaned = -0.00413405 Jy ! Component: 2250 - total flux cleaned = -0.00416174 Jy ! Component: 2300 - total flux cleaned = -0.00418946 Jy ! Component: 2350 - total flux cleaned = -0.00416203 Jy ! Component: 2400 - total flux cleaned = -0.00421732 Jy ! Component: 2450 - total flux cleaned = -0.00427211 Jy ! Component: 2500 - total flux cleaned = -0.00424495 Jy ! Component: 2550 - total flux cleaned = -0.00427214 Jy ! Component: 2600 - total flux cleaned = -0.00429909 Jy ! Component: 2650 - total flux cleaned = -0.00445959 Jy ! Component: 2700 - total flux cleaned = -0.0044596 Jy ! Component: 2750 - total flux cleaned = -0.00432715 Jy ! Component: 2800 - total flux cleaned = -0.00443275 Jy ! Component: 2850 - total flux cleaned = -0.00445883 Jy ! Component: 2900 - total flux cleaned = -0.00443291 Jy ! Component: 2950 - total flux cleaned = -0.00458927 Jy ! Component: 3000 - total flux cleaned = -0.00458935 Jy ! Component: 3050 - total flux cleaned = -0.00464086 Jy ! Component: 3100 - total flux cleaned = -0.00458944 Jy ! Component: 3150 - total flux cleaned = -0.0045896 Jy ! Component: 3200 - total flux cleaned = -0.00471707 Jy ! Component: 3250 - total flux cleaned = -0.00489456 Jy ! Component: 3300 - total flux cleaned = -0.00494499 Jy ! Component: 3350 - total flux cleaned = -0.00494507 Jy ! Component: 3400 - total flux cleaned = -0.00504516 Jy ! Component: 3450 - total flux cleaned = -0.00507011 Jy ! Component: 3500 - total flux cleaned = -0.00506987 Jy ! Component: 3550 - total flux cleaned = -0.00511949 Jy ! Component: 3600 - total flux cleaned = -0.00516876 Jy ! Component: 3650 - total flux cleaned = -0.0051689 Jy ! Component: 3700 - total flux cleaned = -0.00531586 Jy ! Component: 3750 - total flux cleaned = -0.0053401 Jy ! Component: 3800 - total flux cleaned = -0.0054613 Jy ! Component: 3850 - total flux cleaned = -0.00543709 Jy ! Component: 3900 - total flux cleaned = -0.00550905 Jy ! Component: 3950 - total flux cleaned = -0.00546114 Jy ! Component: 4000 - total flux cleaned = -0.00560462 Jy ! Component: 4050 - total flux cleaned = -0.00560453 Jy ! Total flux subtracted in 4096 components = -0.00560449 Jy ! Clean residual min=-0.001537 max=0.001287 Jy/beam ! Clean residual mean=0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 1.07215 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 506 components and 1.07215 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J1043+2408_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6845 x 1.411 at -7.37 degrees (North through East) ! Clean map min=-0.0023917 max=0.96162 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J1043+2408_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 1.76% of the data. ! The x-axis pixel size should ideally be below 0.1651 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.9616 rms= 0.00039 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J1043+2408_X_uvs.log closed on Wed Nov 6 20:46:07 2013