! Started logfile: /scr/pima/rdv95_uvs/J0958+4725_X_uvs.log on Wed Nov 6 20:45:38 2013 obs /scr/pima/rdv95_uvs/J0958+4725_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J0958+4725_X_uva.fits ! AN table 1: 2 integrations on 45 of 45 possible baselines. ! AN table 2: 2 integrations on 45 of 45 possible baselines. ! AN table 3: 2 integrations on 6 of 6 possible baselines. ! AN table 4: 3 integrations on 1 of 1 possible baselines. ! AN table 5: 2 integrations on 36 of 36 possible baselines. ! AN table 6: 2 integrations on 21 of 21 possible baselines. ! AN table 7: 4 integrations on 1 of 1 possible baselines. ! AN table 8: 2 integrations on 1 of 1 possible baselines. ! AN table 9: 2 integrations on 6 of 6 possible baselines. ! AN table 10: 16 integrations on 36 of 36 possible baselines. ! AN table 11: 34 integrations on 6 of 6 possible baselines. ! AN table 12: 24 integrations on 91 of 91 possible baselines. ! AN table 13: 2 integrations on 15 of 15 possible baselines. ! AN table 14: 17 integrations on 55 of 55 possible baselines. ! AN table 15: 2 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.487553 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0958+4725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8304 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J0958+4725_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 10:BR self-cal status=correctable weight=1 ! 10:FT self-cal status=correctable weight=1 ! 10:HN self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:MA self-cal status=correctable weight=1 ! 10:NL self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:SC self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 ! 11:FT self-cal status=correctable weight=1 ! 11:MA self-cal status=correctable weight=1 ! 11:NY self-cal status=correctable weight=1 ! 11:WZ self-cal status=correctable weight=1 ! 12:BR self-cal status=correctable weight=1 ! 12:FD self-cal status=correctable weight=1 ! 12:FT self-cal status=correctable weight=1 ! 12:HN self-cal status=correctable weight=1 ! 12:KP self-cal status=correctable weight=1 ! 12:LA self-cal status=correctable weight=1 ! 12:MA self-cal status=correctable weight=1 ! 12:MK self-cal status=correctable weight=1 ! 12:NL self-cal status=correctable weight=1 ! 12:NY self-cal status=correctable weight=1 ! 12:OV self-cal status=correctable weight=1 ! 12:PT self-cal status=correctable weight=1 ! 12:SC self-cal status=correctable weight=1 ! 12:WZ self-cal status=correctable weight=1 ! 13:HN self-cal status=correctable weight=1 ! 13:MA self-cal status=correctable weight=1 ! 13:NL self-cal status=correctable weight=1 ! 13:NY self-cal status=correctable weight=1 ! 13:SC self-cal status=correctable weight=1 ! 13:WZ self-cal status=correctable weight=1 ! 14:BR self-cal status=correctable weight=1 ! 14:FD self-cal status=correctable weight=1 ! 14:FT self-cal status=correctable weight=1 ! 14:HN self-cal status=correctable weight=1 ! 14:KP self-cal status=correctable weight=1 ! 14:MK self-cal status=correctable weight=1 ! 14:NL self-cal status=correctable weight=1 ! 14:NY self-cal status=correctable weight=1 ! 14:OV self-cal status=correctable weight=1 ! 14:PT self-cal status=correctable weight=1 ! 14:WZ self-cal status=correctable weight=1 ! 15:MK self-cal status=correctable weight=1 ! 15:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 52 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 201 telescope corrections were flagged in sub-array 12. ! A total of 107 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 52 telescope corrections were flagged in sub-array 10. ! A total of 76 telescope corrections were flagged in sub-array 11. ! A total of 201 telescope corrections were flagged in sub-array 12. ! A total of 107 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 222 telescope corrections were flagged in sub-array 12. ! A total of 2 telescope corrections were flagged in sub-array 13. ! A total of 124 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 78 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 222 telescope corrections were flagged in sub-array 12. ! A total of 2 telescope corrections were flagged in sub-array 13. ! A total of 124 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=1.168478Jy sigma=10.002851 ! Fit after self-cal, rms=0.447175Jy sigma=3.073200 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 9:NY ! Flagging baselines of antenna 9:NY in the currently selected channels. flag 10:FT ! Flagging baselines of antenna 10:FT in the currently selected channels. flag 10:MA ! Flagging baselines of antenna 10:MA in the currently selected channels. flag 10:NY ! Flagging baselines of antenna 10:NY in the currently selected channels. flag 10:WZ ! Flagging baselines of antenna 10:WZ in the currently selected channels. flag 11:FT ! Flagging baselines of antenna 11:FT in the currently selected channels. flag 11:MA ! Flagging baselines of antenna 11:MA in the currently selected channels. flag 11:NY ! Flagging baselines of antenna 11:NY in the currently selected channels. flag 11:WZ ! Flagging baselines of antenna 11:WZ in the currently selected channels. flag 12:FT ! Flagging baselines of antenna 12:FT in the currently selected channels. flag 12:MA ! Flagging baselines of antenna 12:MA in the currently selected channels. flag 12:NY ! Flagging baselines of antenna 12:NY in the currently selected channels. flag 12:WZ ! Flagging baselines of antenna 12:WZ in the currently selected channels. flag 13:MA ! Flagging baselines of antenna 13:MA in the currently selected channels. flag 13:NY ! Flagging baselines of antenna 13:NY in the currently selected channels. flag 13:WZ ! Flagging baselines of antenna 13:WZ in the currently selected channels. flag 14:FT ! Flagging baselines of antenna 14:FT in the currently selected channels. flag 14:NY ! Flagging baselines of antenna 14:NY in the currently selected channels. flag 14:WZ ! Flagging baselines of antenna 14:WZ in the currently selected channels. flag 15:WZ ! Flagging baselines of antenna 15:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.087 mas, bmaj=1.188 mas, bpa=-50.53 degrees ! Estimated noise=1.92235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.489749 Jy ! Component: 100 - total flux cleaned = 0.603347 Jy ! Total flux subtracted in 100 components = 0.603347 Jy ! Clean residual min=-0.013334 max=0.043121 Jy/beam ! Clean residual mean=0.000053 rms=0.003539 Jy/beam ! Combined flux in latest and established models = 0.603347 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.603347 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 47 telescope corrections were flagged in sub-array 10. ! A total of 60 telescope corrections were flagged in sub-array 11. ! A total of 45 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 25 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 47 telescope corrections were flagged in sub-array 10. ! A total of 60 telescope corrections were flagged in sub-array 11. ! A total of 45 telescope corrections were flagged in sub-array 12. ! A total of 6 telescope corrections were flagged in sub-array 13. ! A total of 25 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 24 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 14. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 21 telescope corrections were flagged in sub-array 10. ! A total of 24 telescope corrections were flagged in sub-array 12. ! A total of 4 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 14. ! ! Fit before self-cal, rms=0.107598Jy sigma=1.143267 ! Fit after self-cal, rms=0.107589Jy sigma=1.144618 ! Inverting map and beam ! Estimated beam: bmin=1.087 mas, bmaj=1.187 mas, bpa=-50.61 degrees ! Estimated noise=1.92031 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472177 Jy ! Component: 100 - total flux cleaned = 0.0722113 Jy ! Total flux subtracted in 100 components = 0.0722113 Jy ! Clean residual min=-0.008633 max=0.012145 Jy/beam ! Clean residual mean=0.000040 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 0.675558 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 24 components and 0.675558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083182Jy sigma=0.779259 ! Fit after self-cal, rms=0.083035Jy sigma=0.778196 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148804 Jy ! Component: 100 - total flux cleaned = 0.0240777 Jy ! Total flux subtracted in 100 components = 0.0240777 Jy ! Clean residual min=-0.008227 max=0.009662 Jy/beam ! Clean residual mean=0.000035 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 0.699636 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.699636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079467Jy sigma=0.712049 ! Fit after self-cal, rms=0.079403Jy sigma=0.711668 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.332 mas, bmaj=1.48 mas, bpa=6.402 degrees ! Estimated noise=1.27862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147867 Jy ! Component: 100 - total flux cleaned = 0.0219948 Jy ! Component: 150 - total flux cleaned = 0.0261944 Jy ! Component: 200 - total flux cleaned = 0.0285344 Jy ! Total flux subtracted in 200 components = 0.0285344 Jy ! Clean residual min=-0.007872 max=0.009919 Jy/beam ! Clean residual mean=0.000060 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 0.72817 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.72817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078239Jy sigma=0.668902 ! Fit after self-cal, rms=0.078185Jy sigma=0.668569 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.03 KP 1.00 ! LA 1.05 MK 0.95 NL 0.97 OV 0.99 ! PT 1.01 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 1.05 KP 1.03 ! LA 1.06 MK 0.96 NL 0.98 OV 1.00 ! PT 1.01 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.01 HN 1.13 LA 1.07 NL 1.03 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 1.07 KP 1.06 LA 1.06 ! MK 0.97 NL 1.02 NY 1.00* OV 1.02 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 KP 1.05 LA 1.14 MK 0.99 ! NL 1.02 OV 1.02 PT 1.01 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NL 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.95 FT 1.00* HN 1.01 LA 1.12 ! MA 1.00* NL 0.99 NY 1.00* SC 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! BR 0.95 FD 0.99 FT 1.00* HN 1.06 ! KP 1.03 LA 1.02 MA 1.00* MK 0.99 ! NL 0.95 NY 1.00* OV 0.98 PT 0.97 ! SC 0.99 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* MA 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! BR 0.97 FD 0.98 FT 1.00* HN 1.13 ! KP 1.00 MK 0.97 NL 0.95 NY 1.00* ! OV 0.98 PT 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.08 KP 0.96 ! LA 1.00 MK 0.99 NL 0.98 OV 0.99 ! PT 1.00 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 HN 1.08 KP 0.97 ! LA 1.02 MK 0.97 NL 0.99 OV 0.99 ! PT 0.99 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 HN 1.13 LA 0.99 NL 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.10 KP 0.99 LA 1.02 ! MK 1.02 NL 1.03 NY 1.00* OV 1.01 ! PT 1.05 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 KP 0.99 LA 1.06 MK 0.98 ! NL 1.06 OV 1.05 PT 1.05 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NL 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 0.99 FT 1.00* HN 1.03 LA 1.07 ! MA 1.00* NL 1.00 NY 1.00* SC 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! BR 0.96 FD 0.99 FT 1.00* HN 1.12 ! KP 0.96 LA 0.99 MA 1.00* MK 1.00 ! NL 0.95 NY 1.00* OV 0.95 PT 0.99 ! SC 1.02 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* MA 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! BR 0.97 FD 0.99 FT 1.00* HN 1.30 ! KP 0.95 MK 0.97 NL 0.96 NY 1.00* ! OV 0.98 PT 0.97 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.11 KP 0.86 ! LA 1.09 MK 1.00 NL 1.00 OV 1.06 ! PT 0.97 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 1.16 KP 0.88 ! LA 1.09 MK 0.97 NL 1.00 OV 1.02 ! PT 1.01 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.03 HN 1.15 LA 1.06 NL 1.11 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.03 KP 0.91 LA 1.11 ! MK 0.99 NL 1.06 NY 1.00* OV 1.07 ! PT 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.07 KP 0.92 LA 1.16 MK 1.01 ! NL 1.09 OV 1.13 PT 0.99 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NL 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.03 FT 1.00* HN 1.05 LA 1.11 ! MA 1.00* NL 1.03 NY 1.00* SC 1.02 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! BR 1.02 FD 0.99 FT 1.00* HN 1.12 ! KP 0.88 LA 1.05 MA 1.00* MK 1.00 ! NL 0.98 NY 1.00* OV 1.01 PT 0.98 ! SC 0.99 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* MA 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! BR 1.02 FD 0.98 FT 1.00* HN 1.30 ! KP 0.86 MK 0.99 NL 0.97 NY 1.00* ! OV 1.00 PT 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 1.10 KP 0.92 ! LA 1.07 MK 1.03 NL 1.02 OV 1.00 ! PT 1.01 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.11 HN 1.17 KP 0.92 ! LA 1.06 MK 1.00 NL 1.03 OV 1.03 ! PT 1.04 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.15 HN 1.19 LA 1.05 NL 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.03 FD 1.12 KP 0.94 LA 1.06 ! MK 1.03 NL 1.10 NY 1.00* OV 1.05 ! PT 1.10 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.06 KP 0.95 LA 1.09 MK 1.00 ! NL 1.12 OV 1.09 PT 1.10 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NL 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.00 FT 1.00* HN 1.07 LA 1.11 ! MA 1.00* NL 1.02 NY 1.00* SC 1.08 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 11: ! FT 0.00* MA 0.00* NY 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 12. ! Telescope amplitude corrections in sub-array 12: ! BR 0.98 FD 1.04 FT 1.00* HN 1.15 ! KP 0.89 LA 1.03 MA 1.00* MK 1.05 ! NL 1.01 NY 1.00* OV 0.99 PT 1.03 ! SC 1.00 WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 13. ! Telescope amplitude corrections in sub-array 13: ! HN 0.00* MA 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 14. ! Telescope amplitude corrections in sub-array 14: ! BR 0.98 FD 1.04 FT 1.00* HN 1.31 ! KP 0.91 MK 1.01 NL 0.99 NY 1.00* ! OV 0.99 PT 1.02 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 15: ! MK 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.078185Jy sigma=0.668569 ! Fit after self-cal, rms=0.059096Jy sigma=0.467391 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.336 mas, bmaj=1.487 mas, bpa=8.282 degrees ! Estimated noise=1.29108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000985459 Jy ! Component: 100 - total flux cleaned = -0.00125418 Jy ! Component: 150 - total flux cleaned = -0.00137222 Jy ! Component: 200 - total flux cleaned = -0.00157759 Jy ! Total flux subtracted in 200 components = -0.00157759 Jy ! Clean residual min=-0.002764 max=0.002813 Jy/beam ! Clean residual mean=0.000010 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.726592 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.726592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058919Jy sigma=0.466055 ! Fit after self-cal, rms=0.058936Jy sigma=0.465866 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058936Jy sigma=0.465866 ! Fit after self-cal, rms=0.058958Jy sigma=0.465683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.337 mas, bmaj=1.489 mas, bpa=8.538 degrees ! Estimated noise=1.29099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000894473 Jy ! Component: 100 - total flux cleaned = -0.00111738 Jy ! Component: 150 - total flux cleaned = -0.00126132 Jy ! Component: 200 - total flux cleaned = -0.00134808 Jy ! Total flux subtracted in 200 components = -0.00134808 Jy ! Clean residual min=-0.002709 max=0.002704 Jy/beam ! Clean residual mean=0.000010 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.725244 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.725244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058832Jy sigma=0.464786 ! Fit after self-cal, rms=0.058809Jy sigma=0.464696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.54524e-05 Jy ! Component: 100 - total flux cleaned = -0.000139742 Jy ! Component: 150 - total flux cleaned = -0.000212609 Jy ! Component: 200 - total flux cleaned = -0.000312731 Jy ! Total flux subtracted in 200 components = -0.000312731 Jy ! Clean residual min=-0.002724 max=0.002647 Jy/beam ! Clean residual mean=0.000010 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.724932 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.724932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058735Jy sigma=0.464269 ! Fit after self-cal, rms=0.058718Jy sigma=0.464204 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058718Jy sigma=0.464204 ! Fit after self-cal, rms=0.058770Jy sigma=0.463987 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.338 mas, bmaj=1.492 mas, bpa=8.753 degrees ! Estimated noise=1.29147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000793123 Jy ! Component: 100 - total flux cleaned = -0.000916982 Jy ! Component: 150 - total flux cleaned = -0.00102609 Jy ! Component: 200 - total flux cleaned = -0.00109266 Jy ! Total flux subtracted in 200 components = -0.00109266 Jy ! Clean residual min=-0.002729 max=0.002581 Jy/beam ! Clean residual mean=0.000010 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.723839 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.723839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058694Jy sigma=0.463483 ! Fit after self-cal, rms=0.058683Jy sigma=0.463440 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.7537e-05 Jy ! Component: 100 - total flux cleaned = -0.000108813 Jy ! Component: 150 - total flux cleaned = -0.000166377 Jy ! Component: 200 - total flux cleaned = -0.000245597 Jy ! Total flux subtracted in 200 components = -0.000245597 Jy ! Clean residual min=-0.002749 max=0.002576 Jy/beam ! Clean residual mean=0.000010 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.723593 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.723593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058638Jy sigma=0.463195 ! Fit after self-cal, rms=0.058628Jy sigma=0.463161 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058628Jy sigma=0.463161 ! Fit after self-cal, rms=0.058680Jy sigma=0.463029 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.487 mas, bmaj=2.728 mas, bpa=48.01 degrees ! Estimated noise=1.4036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199416 Jy ! Component: 100 - total flux cleaned = -0.000331625 Jy ! Component: 150 - total flux cleaned = -0.000431714 Jy ! Component: 200 - total flux cleaned = -0.000509174 Jy ! Total flux subtracted in 200 components = -0.000509174 Jy ! Clean residual min=-0.003021 max=0.002967 Jy/beam ! Clean residual mean=0.000020 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.723084 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.723084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058688Jy sigma=0.462742 ! Fit after self-cal, rms=0.058671Jy sigma=0.462639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.06282e-05 Jy ! Component: 100 - total flux cleaned = -0.000120283 Jy ! Component: 150 - total flux cleaned = -0.000160329 Jy ! Component: 200 - total flux cleaned = -0.000160442 Jy ! Total flux subtracted in 200 components = -0.000160442 Jy ! Clean residual min=-0.003007 max=0.002950 Jy/beam ! Clean residual mean=0.000020 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.722924 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.722924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058689Jy sigma=0.462622 ! Fit after self-cal, rms=0.058678Jy sigma=0.462554 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 5:BR,true ! 5:BR self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:MK,true ! 5:MK self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 9:BR,true ! 9:BR self-cal status=fixed weight=1 selfant 9:HN,true ! 9:HN self-cal status=fixed weight=1 selfant 9:NL,true ! 9:NL self-cal status=fixed weight=1 selfant 10:BR,true ! 10:BR self-cal status=fixed weight=1 selfant 10:HN,true ! 10:HN self-cal status=fixed weight=1 selfant 10:LA,true ! 10:LA self-cal status=fixed weight=1 selfant 10:NL,true ! 10:NL self-cal status=fixed weight=1 selfant 10:SC,true ! 10:SC self-cal status=fixed weight=1 selfant 12:BR,true ! 12:BR self-cal status=fixed weight=1 selfant 12:FD,true ! 12:FD self-cal status=fixed weight=1 selfant 12:HN,true ! 12:HN self-cal status=fixed weight=1 selfant 12:KP,true ! 12:KP self-cal status=fixed weight=1 selfant 12:LA,true ! 12:LA self-cal status=fixed weight=1 selfant 12:MK,true ! 12:MK self-cal status=fixed weight=1 selfant 12:NL,true ! 12:NL self-cal status=fixed weight=1 selfant 12:OV,true ! 12:OV self-cal status=fixed weight=1 selfant 12:PT,true ! 12:PT self-cal status=fixed weight=1 selfant 12:SC,true ! 12:SC self-cal status=fixed weight=1 selfant 13:HN,true ! 13:HN self-cal status=fixed weight=1 selfant 13:NL,true ! 13:NL self-cal status=fixed weight=1 selfant 13:SC,true ! 13:SC self-cal status=fixed weight=1 selfant 14:BR,true ! 14:BR self-cal status=fixed weight=1 selfant 14:FD,true ! 14:FD self-cal status=fixed weight=1 selfant 14:HN,true ! 14:HN self-cal status=fixed weight=1 selfant 14:KP,true ! 14:KP self-cal status=fixed weight=1 selfant 14:MK,true ! 14:MK self-cal status=fixed weight=1 selfant 14:NL,true ! 14:NL self-cal status=fixed weight=1 selfant 14:OV,true ! 14:OV self-cal status=fixed weight=1 selfant 14:PT,true ! 14:PT self-cal status=fixed weight=1 selfant 15:MK,true ! 15:MK self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 62 telescope corrections were flagged in sub-array 12. ! A total of 35 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 34 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 62 telescope corrections were flagged in sub-array 12. ! A total of 35 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 46 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 75 telescope corrections were flagged in sub-array 12. ! A total of 2 telescope corrections were flagged in sub-array 13. ! A total of 43 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 46 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 75 telescope corrections were flagged in sub-array 12. ! A total of 2 telescope corrections were flagged in sub-array 13. ! A total of 43 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.143669Jy sigma=0.762927 ! Fit after self-cal, rms=0.096497Jy sigma=0.547275 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 10:BR self-cal status=correctable weight=1 ! 10:FT self-cal status=correctable weight=1 ! 10:HN self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:MA self-cal status=correctable weight=1 ! 10:NL self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:SC self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 ! 11:FT self-cal status=correctable weight=1 ! 11:MA self-cal status=correctable weight=1 ! 11:NY self-cal status=correctable weight=1 ! 11:WZ self-cal status=correctable weight=1 ! 12:BR self-cal status=correctable weight=1 ! 12:FD self-cal status=correctable weight=1 ! 12:FT self-cal status=correctable weight=1 ! 12:HN self-cal status=correctable weight=1 ! 12:KP self-cal status=correctable weight=1 ! 12:LA self-cal status=correctable weight=1 ! 12:MA self-cal status=correctable weight=1 ! 12:MK self-cal status=correctable weight=1 ! 12:NL self-cal status=correctable weight=1 ! 12:NY self-cal status=correctable weight=1 ! 12:OV self-cal status=correctable weight=1 ! 12:PT self-cal status=correctable weight=1 ! 12:SC self-cal status=correctable weight=1 ! 12:WZ self-cal status=correctable weight=1 ! 13:HN self-cal status=correctable weight=1 ! 13:MA self-cal status=correctable weight=1 ! 13:NL self-cal status=correctable weight=1 ! 13:NY self-cal status=correctable weight=1 ! 13:SC self-cal status=correctable weight=1 ! 13:WZ self-cal status=correctable weight=1 ! 14:BR self-cal status=correctable weight=1 ! 14:FD self-cal status=correctable weight=1 ! 14:FT self-cal status=correctable weight=1 ! 14:HN self-cal status=correctable weight=1 ! 14:KP self-cal status=correctable weight=1 ! 14:MK self-cal status=correctable weight=1 ! 14:NL self-cal status=correctable weight=1 ! 14:NY self-cal status=correctable weight=1 ! 14:OV self-cal status=correctable weight=1 ! 14:PT self-cal status=correctable weight=1 ! 14:WZ self-cal status=correctable weight=1 ! 15:MK self-cal status=correctable weight=1 ! 15:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 33 telescope corrections were flagged in sub-array 10. ! A total of 148 telescope corrections were flagged in sub-array 12. ! A total of 81 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 33 telescope corrections were flagged in sub-array 10. ! A total of 148 telescope corrections were flagged in sub-array 12. ! A total of 81 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 35 telescope corrections were flagged in sub-array 10. ! A total of 150 telescope corrections were flagged in sub-array 12. ! A total of 81 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 35 telescope corrections were flagged in sub-array 10. ! A total of 150 telescope corrections were flagged in sub-array 12. ! A total of 81 telescope corrections were flagged in sub-array 14. ! A total of 2 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.096497Jy sigma=0.547275 ! Fit after self-cal, rms=0.076426Jy sigma=0.439661 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.725 mas, bmaj=0.9291 mas, bpa=-32.3 degrees ! Estimated noise=1.93769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363325 Jy ! Component: 100 - total flux cleaned = -0.000124006 Jy ! Component: 150 - total flux cleaned = -0.000851405 Jy ! Component: 200 - total flux cleaned = -0.00125233 Jy ! Total flux subtracted in 200 components = -0.00125233 Jy ! Clean residual min=-0.003867 max=0.004053 Jy/beam ! Clean residual mean=0.000001 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.721671 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.721671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075548Jy sigma=0.437327 ! Fit after self-cal, rms=0.075180Jy sigma=0.436347 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (5, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243649 Jy ! Component: 100 - total flux cleaned = 0.00243575 Jy ! Component: 150 - total flux cleaned = 0.00221314 Jy ! Component: 200 - total flux cleaned = 0.00200892 Jy ! Total flux subtracted in 200 components = 0.00200892 Jy ! Clean residual min=-0.003576 max=0.003606 Jy/beam ! Clean residual mean=0.000001 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.72368 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.72368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074746Jy sigma=0.434957 ! Fit after self-cal, rms=0.074749Jy sigma=0.434826 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (23.2, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172463 Jy ! Component: 100 - total flux cleaned = 0.00204205 Jy ! Component: 150 - total flux cleaned = 0.00186112 Jy ! Component: 200 - total flux cleaned = 0.00177448 Jy ! Total flux subtracted in 200 components = 0.00177448 Jy ! Clean residual min=-0.003481 max=0.003325 Jy/beam ! Clean residual mean=0.000001 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.725455 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.725455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074408Jy sigma=0.433715 ! Fit after self-cal, rms=0.074407Jy sigma=0.433646 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8428 mas, bmaj=1.104 mas, bpa=-24.22 degrees ! Estimated noise=1.25207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -1.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321188 Jy ! Component: 100 - total flux cleaned = 0.00372902 Jy ! Component: 150 - total flux cleaned = 0.00388522 Jy ! Component: 200 - total flux cleaned = 0.00416233 Jy ! Component: 250 - total flux cleaned = 0.00416192 Jy ! Component: 300 - total flux cleaned = 0.00422262 Jy ! Component: 350 - total flux cleaned = 0.00428142 Jy ! Component: 400 - total flux cleaned = 0.00433577 Jy ! Total flux subtracted in 400 components = 0.00433577 Jy ! Clean residual min=-0.002770 max=0.003126 Jy/beam ! Clean residual mean=0.000007 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.729791 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 107 components and 0.729791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073906Jy sigma=0.431646 ! Fit after self-cal, rms=0.073876Jy sigma=0.431490 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (-7, 25.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282755 Jy ! Component: 100 - total flux cleaned = 0.00366002 Jy ! Component: 150 - total flux cleaned = 0.00383937 Jy ! Component: 200 - total flux cleaned = 0.00406399 Jy ! Component: 250 - total flux cleaned = 0.00422248 Jy ! Component: 300 - total flux cleaned = 0.0042731 Jy ! Component: 350 - total flux cleaned = 0.00442186 Jy ! Component: 400 - total flux cleaned = 0.00446997 Jy ! Total flux subtracted in 400 components = 0.00446997 Jy ! Clean residual min=-0.002539 max=0.002806 Jy/beam ! Clean residual mean=0.000004 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.73426 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 132 components and 0.73426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073499Jy sigma=0.430088 ! Fit after self-cal, rms=0.073490Jy sigma=0.429957 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (-43.6, -28.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273445 Jy ! Component: 100 - total flux cleaned = 0.00402904 Jy ! Component: 150 - total flux cleaned = 0.00511772 Jy ! Component: 200 - total flux cleaned = 0.00590058 Jy ! Component: 250 - total flux cleaned = 0.00653208 Jy ! Component: 300 - total flux cleaned = 0.00671812 Jy ! Component: 350 - total flux cleaned = 0.00689929 Jy ! Component: 400 - total flux cleaned = 0.00711641 Jy ! Total flux subtracted in 400 components = 0.00711641 Jy ! Clean residual min=-0.002363 max=0.002729 Jy/beam ! Clean residual mean=0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.741377 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 163 components and 0.741377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073179Jy sigma=0.428524 ! Fit after self-cal, rms=0.073171Jy sigma=0.428436 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (-17.6, 6.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256683 Jy ! Component: 100 - total flux cleaned = 0.00274703 Jy ! Component: 150 - total flux cleaned = 0.00300663 Jy ! Component: 200 - total flux cleaned = 0.00335256 Jy ! Component: 250 - total flux cleaned = 0.00367862 Jy ! Component: 300 - total flux cleaned = 0.00394497 Jy ! Component: 350 - total flux cleaned = 0.00420217 Jy ! Component: 400 - total flux cleaned = 0.00441224 Jy ! Total flux subtracted in 400 components = 0.00441224 Jy ! Clean residual min=-0.002328 max=0.002667 Jy/beam ! Clean residual mean=0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.745789 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 201 components and 0.745789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072858Jy sigma=0.427265 ! Fit after self-cal, rms=0.072852Jy sigma=0.427188 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (15, -48.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252419 Jy ! Component: 100 - total flux cleaned = 0.00332749 Jy ! Component: 150 - total flux cleaned = 0.00383551 Jy ! Component: 200 - total flux cleaned = 0.00415879 Jy ! Component: 250 - total flux cleaned = 0.00437631 Jy ! Component: 300 - total flux cleaned = 0.00458606 Jy ! Component: 350 - total flux cleaned = 0.00470879 Jy ! Component: 400 - total flux cleaned = 0.00486795 Jy ! Total flux subtracted in 400 components = 0.00486795 Jy ! Clean residual min=-0.002243 max=0.002434 Jy/beam ! Clean residual mean=0.000003 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.750657 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 231 components and 0.750657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072587Jy sigma=0.426099 ! Fit after self-cal, rms=0.072577Jy sigma=0.426037 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (31.2, 24.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216444 Jy ! Component: 100 - total flux cleaned = 0.00289191 Jy ! Component: 150 - total flux cleaned = 0.00318021 Jy ! Component: 200 - total flux cleaned = 0.00358307 Jy ! Component: 250 - total flux cleaned = 0.00366756 Jy ! Component: 300 - total flux cleaned = 0.00379045 Jy ! Component: 350 - total flux cleaned = 0.0040299 Jy ! Component: 400 - total flux cleaned = 0.0041854 Jy ! Total flux subtracted in 400 components = 0.0041854 Jy ! Clean residual min=-0.002264 max=0.002357 Jy/beam ! Clean residual mean=0.000002 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.754842 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 261 components and 0.754842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072335Jy sigma=0.425111 ! Fit after self-cal, rms=0.072332Jy sigma=0.425043 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (-19, -39.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231046 Jy ! Component: 100 - total flux cleaned = 0.00284328 Jy ! Component: 150 - total flux cleaned = 0.00319063 Jy ! Component: 200 - total flux cleaned = 0.0036931 Jy ! Component: 250 - total flux cleaned = 0.00416943 Jy ! Component: 300 - total flux cleaned = 0.00458387 Jy ! Component: 350 - total flux cleaned = 0.00482424 Jy ! Component: 400 - total flux cleaned = 0.00505774 Jy ! Total flux subtracted in 400 components = 0.00505774 Jy ! Clean residual min=-0.002320 max=0.002307 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.7599 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 284 components and 0.7599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072091Jy sigma=0.424040 ! Fit after self-cal, rms=0.072090Jy sigma=0.423986 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551916 Jy ! Component: 100 - total flux cleaned = 0.000744527 Jy ! Component: 150 - total flux cleaned = 0.000857277 Jy ! Component: 200 - total flux cleaned = 0.000931125 Jy ! Component: 250 - total flux cleaned = 0.000967723 Jy ! Component: 300 - total flux cleaned = 0.00100355 Jy ! Component: 350 - total flux cleaned = 0.0011094 Jy ! Component: 400 - total flux cleaned = 0.00114431 Jy ! Total flux subtracted in 400 components = 0.00114431 Jy ! Clean residual min=-0.002333 max=0.002241 Jy/beam ! Clean residual mean=-0.000001 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.761044 Jy ! Performing phase self-cal ! Adding 103 model components to the UV plane model. ! The established model now contains 295 components and 0.761045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071969Jy sigma=0.423594 ! Fit after self-cal, rms=0.071967Jy sigma=0.423585 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 67 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 210 telescope corrections were flagged in sub-array 12. ! A total of 116 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 67 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 210 telescope corrections were flagged in sub-array 12. ! A total of 116 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 81 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 225 telescope corrections were flagged in sub-array 12. ! A total of 2 telescope corrections were flagged in sub-array 13. ! A total of 124 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 8. ! A total of 8 telescope corrections were flagged in sub-array 9. ! A total of 81 telescope corrections were flagged in sub-array 10. ! A total of 136 telescope corrections were flagged in sub-array 11. ! A total of 225 telescope corrections were flagged in sub-array 12. ! A total of 2 telescope corrections were flagged in sub-array 13. ! A total of 124 telescope corrections were flagged in sub-array 14. ! A total of 4 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.133179Jy sigma=0.701008 ! Fit after self-cal, rms=0.071399Jy sigma=0.422115 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8397 mas, bmaj=1.104 mas, bpa=-23.96 degrees ! Estimated noise=1.25275 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593401 Jy ! Component: 100 - total flux cleaned = 0.000481984 Jy ! Component: 150 - total flux cleaned = 0.000385155 Jy ! Component: 200 - total flux cleaned = 0.000385881 Jy ! Component: 250 - total flux cleaned = 0.000469191 Jy ! Component: 300 - total flux cleaned = 0.000549245 Jy ! Component: 350 - total flux cleaned = 0.000511067 Jy ! Component: 400 - total flux cleaned = 0.000663788 Jy ! Total flux subtracted in 400 components = 0.000663788 Jy ! Clean residual min=-0.002042 max=0.001972 Jy/beam ! Clean residual mean=0.000004 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.761708 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 310 components and 0.761708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071109Jy sigma=0.421270 ! Fit after self-cal, rms=0.071105Jy sigma=0.421252 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.06757e-05 Jy ! Component: 100 - total flux cleaned = 0.000180747 Jy ! Component: 150 - total flux cleaned = 0.000253977 Jy ! Component: 200 - total flux cleaned = 0.000360393 Jy ! Component: 250 - total flux cleaned = 0.000361379 Jy ! Component: 300 - total flux cleaned = 0.000497432 Jy ! Component: 350 - total flux cleaned = 0.000531202 Jy ! Component: 400 - total flux cleaned = 0.000695621 Jy ! Total flux subtracted in 400 components = 0.000695621 Jy ! Clean residual min=-0.002038 max=0.001941 Jy/beam ! Clean residual mean=0.000004 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.762404 Jy ! Performing phase self-cal ! Adding 97 model components to the UV plane model. ! The established model now contains 330 components and 0.762404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070987Jy sigma=0.420825 ! Fit after self-cal, rms=0.070985Jy sigma=0.420817 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070985Jy sigma=0.420817 ! Fit after self-cal, rms=0.070942Jy sigma=0.420650 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8387 mas, bmaj=1.104 mas, bpa=-23.85 degrees ! Estimated noise=1.25393 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000583035 Jy ! Component: 100 - total flux cleaned = 0.000415026 Jy ! Component: 150 - total flux cleaned = 0.000115871 Jy ! Component: 200 - total flux cleaned = -2.63351e-05 Jy ! Component: 250 - total flux cleaned = -0.000161689 Jy ! Component: 300 - total flux cleaned = -0.000194672 Jy ! Component: 350 - total flux cleaned = -0.000194341 Jy ! Component: 400 - total flux cleaned = -0.000162083 Jy ! Total flux subtracted in 400 components = -0.000162083 Jy ! Clean residual min=-0.001959 max=0.001906 Jy/beam ! Clean residual mean=0.000004 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.762242 Jy selfcal ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 345 components and 0.762242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070761Jy sigma=0.420064 ! Fit after self-cal, rms=0.070759Jy sigma=0.420055 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.86657e-05 Jy ! Component: 100 - total flux cleaned = -0.000100414 Jy ! Component: 150 - total flux cleaned = -3.74183e-05 Jy ! Component: 200 - total flux cleaned = 2.37532e-05 Jy ! Component: 250 - total flux cleaned = -6.43309e-06 Jy ! Component: 300 - total flux cleaned = -6.89412e-06 Jy ! Component: 350 - total flux cleaned = 5.24624e-05 Jy ! Component: 400 - total flux cleaned = 2.32719e-05 Jy ! Total flux subtracted in 400 components = 2.32719e-05 Jy ! Clean residual min=-0.001956 max=0.001885 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.762265 Jy ! Performing phase self-cal ! Adding 117 model components to the UV plane model. ! The established model now contains 352 components and 0.762266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070680Jy sigma=0.419707 ! Fit after self-cal, rms=0.070678Jy sigma=0.419702 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070678Jy sigma=0.419702 ! Fit after self-cal, rms=0.070031Jy sigma=0.413844 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=2.453 mas, bmaj=2.7 mas, bpa=45.35 degrees ! Estimated noise=1.40067 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581068 Jy ! Component: 100 - total flux cleaned = 0.000764365 Jy ! Component: 150 - total flux cleaned = 0.000926431 Jy ! Component: 200 - total flux cleaned = 0.000999931 Jy ! Component: 250 - total flux cleaned = 0.00109422 Jy ! Component: 300 - total flux cleaned = 0.00118416 Jy ! Component: 350 - total flux cleaned = 0.00127037 Jy ! Component: 400 - total flux cleaned = 0.00139347 Jy ! Total flux subtracted in 400 components = 0.00139347 Jy ! Clean residual min=-0.002272 max=0.002570 Jy/beam ! Clean residual mean=0.000011 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.763659 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 379 components and 0.763659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070016Jy sigma=0.413722 ! Fit after self-cal, rms=0.070015Jy sigma=0.413705 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23, 13). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852719 Jy ! Component: 100 - total flux cleaned = 0.0006297 Jy ! Component: 150 - total flux cleaned = 0.000565895 Jy ! Component: 200 - total flux cleaned = 0.000714006 Jy ! Component: 250 - total flux cleaned = 0.000804733 Jy ! Component: 300 - total flux cleaned = 0.000845359 Jy ! Component: 350 - total flux cleaned = 0.000961589 Jy ! Component: 400 - total flux cleaned = 0.000999334 Jy ! Total flux subtracted in 400 components = 0.000999334 Jy ! Clean residual min=-0.002114 max=0.002059 Jy/beam ! Clean residual mean=0.000009 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.764659 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 449 components and 0.764659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069914Jy sigma=0.412573 ! Fit after self-cal, rms=0.069904Jy sigma=0.412478 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (9.8, -20.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199618 Jy ! Component: 100 - total flux cleaned = 0.00247573 Jy ! Component: 150 - total flux cleaned = 0.00284392 Jy ! Component: 200 - total flux cleaned = 0.00296806 Jy ! Component: 250 - total flux cleaned = 0.00312725 Jy ! Component: 300 - total flux cleaned = 0.0033178 Jy ! Component: 350 - total flux cleaned = 0.00346502 Jy ! Component: 400 - total flux cleaned = 0.00360724 Jy ! Total flux subtracted in 400 components = 0.00360724 Jy ! Clean residual min=-0.001997 max=0.001684 Jy/beam ! Clean residual mean=0.000010 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.768266 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 512 components and 0.768266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069790Jy sigma=0.411625 ! Fit after self-cal, rms=0.069792Jy sigma=0.411584 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8378 mas, bmaj=1.105 mas, bpa=-23.78 degrees ! Estimated noise=1.25545 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8378 x 1.105 at -23.78 degrees (North through East) ! Clean map min=-0.0019563 max=0.61138 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069792Jy sigma=0.411584 ! Fit after self-cal, rms=0.066896Jy sigma=0.383741 ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8383 mas, bmaj=1.104 mas, bpa=-23.87 degrees ! Estimated noise=1.2558 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387526 Jy ! Component: 100 - total flux cleaned = -0.000511453 Jy ! Component: 150 - total flux cleaned = -0.000571459 Jy ! Component: 200 - total flux cleaned = -0.000515481 Jy ! Component: 250 - total flux cleaned = -0.000407676 Jy ! Component: 300 - total flux cleaned = -0.000252237 Jy ! Component: 350 - total flux cleaned = -5.03607e-05 Jy ! Component: 400 - total flux cleaned = -1.6441e-06 Jy ! Total flux subtracted in 400 components = -1.6441e-06 Jy ! Clean residual min=-0.001669 max=0.001814 Jy/beam ! Clean residual mean=0.000003 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.768264 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 584 components and 0.768264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066667Jy sigma=0.382497 ! Fit after self-cal, rms=0.066667Jy sigma=0.382467 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (-48.6, 40). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000629844 Jy ! Component: 100 - total flux cleaned = 0.000783497 Jy ! Component: 150 - total flux cleaned = 0.000929366 Jy ! Component: 200 - total flux cleaned = 0.00116558 Jy ! Component: 250 - total flux cleaned = 0.00116639 Jy ! Component: 300 - total flux cleaned = 0.00143908 Jy ! Component: 350 - total flux cleaned = 0.00148325 Jy ! Component: 400 - total flux cleaned = 0.00157154 Jy ! Total flux subtracted in 400 components = 0.00157154 Jy ! Clean residual min=-0.001583 max=0.001673 Jy/beam ! Clean residual mean=0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.769836 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 615 components and 0.769836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066489Jy sigma=0.381515 ! Fit after self-cal, rms=0.066489Jy sigma=0.381485 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Added new window around map position (35.8, -25.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122467 Jy ! Component: 100 - total flux cleaned = 0.00154958 Jy ! Component: 150 - total flux cleaned = 0.00181746 Jy ! Component: 200 - total flux cleaned = 0.00203436 Jy ! Component: 250 - total flux cleaned = 0.00237348 Jy ! Component: 300 - total flux cleaned = 0.00254045 Jy ! Component: 350 - total flux cleaned = 0.00274663 Jy ! Component: 400 - total flux cleaned = 0.00290851 Jy ! Total flux subtracted in 400 components = 0.00290851 Jy ! Clean residual min=-0.001589 max=0.001517 Jy/beam ! Clean residual mean=0.000003 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.772744 Jy ! Performing phase self-cal ! Adding 109 model components to the UV plane model. ! The established model now contains 652 components and 0.772744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066329Jy sigma=0.380636 ! Fit after self-cal, rms=0.066330Jy sigma=0.380620 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066330Jy sigma=0.380620 ! Fit after self-cal, rms=0.066329Jy sigma=0.380486 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.7226 mas, bmaj=0.9281 mas, bpa=-31.76 degrees ! Estimated noise=1.94582 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.477273 Jy ! Component: 100 - total flux cleaned = 0.596297 Jy ! Component: 150 - total flux cleaned = 0.648968 Jy ! Component: 200 - total flux cleaned = 0.677399 Jy ! Component: 250 - total flux cleaned = 0.694063 Jy ! Component: 300 - total flux cleaned = 0.704298 Jy ! Component: 350 - total flux cleaned = 0.710986 Jy ! Component: 400 - total flux cleaned = 0.716031 Jy ! Total flux subtracted in 400 components = 0.716031 Jy ! Clean residual min=-0.003413 max=0.003101 Jy/beam ! Clean residual mean=0.000005 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.71603 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.71603 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8384 mas, bmaj=1.104 mas, bpa=-23.87 degrees ! Estimated noise=1.25615 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551974 Jy ! Component: 100 - total flux cleaned = 0.00948326 Jy ! Component: 150 - total flux cleaned = 0.0127756 Jy ! Component: 200 - total flux cleaned = 0.015003 Jy ! Component: 250 - total flux cleaned = 0.0173203 Jy ! Component: 300 - total flux cleaned = 0.0193008 Jy ! Component: 350 - total flux cleaned = 0.0212839 Jy ! Component: 400 - total flux cleaned = 0.0226775 Jy ! Total flux subtracted in 400 components = 0.0226775 Jy ! Clean residual min=-0.002363 max=0.002340 Jy/beam ! Clean residual mean=0.000009 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.738708 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 116 components and 0.738708 Jy ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=2.454 mas, bmaj=2.7 mas, bpa=45.43 degrees ! Estimated noise=1.40111 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314114 Jy ! Component: 100 - total flux cleaned = 0.00484044 Jy ! Component: 150 - total flux cleaned = 0.00616847 Jy ! Component: 200 - total flux cleaned = 0.00749762 Jy ! Component: 250 - total flux cleaned = 0.00865951 Jy ! Component: 300 - total flux cleaned = 0.00992309 Jy ! Component: 350 - total flux cleaned = 0.0110394 Jy ! Component: 400 - total flux cleaned = 0.0121782 Jy ! Total flux subtracted in 400 components = 0.0121782 Jy ! Clean residual min=-0.002332 max=0.002368 Jy/beam ! Clean residual mean=0.000014 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.750886 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49, -4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190674 Jy ! Component: 100 - total flux cleaned = 0.00268433 Jy ! Component: 150 - total flux cleaned = 0.00349216 Jy ! Component: 200 - total flux cleaned = 0.00439458 Jy ! Component: 250 - total flux cleaned = 0.00501511 Jy ! Component: 300 - total flux cleaned = 0.00597473 Jy ! Component: 350 - total flux cleaned = 0.00667184 Jy ! Component: 400 - total flux cleaned = 0.00751742 Jy ! Total flux subtracted in 400 components = 0.00751742 Jy ! Clean residual min=-0.002035 max=0.001984 Jy/beam ! Clean residual mean=0.000011 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.758404 Jy ! Adding 173 model components to the UV plane model. ! The established model now contains 275 components and 0.758404 Jy ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! Estimated beam: bmin=0.8384 mas, bmaj=1.104 mas, bpa=-23.87 degrees ! Estimated noise=1.25615 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114001 Jy ! Component: 100 - total flux cleaned = 0.00168502 Jy ! Component: 150 - total flux cleaned = 0.00198171 Jy ! Component: 200 - total flux cleaned = 0.00219453 Jy ! Component: 250 - total flux cleaned = 0.00233353 Jy ! Component: 300 - total flux cleaned = 0.00273804 Jy ! Component: 350 - total flux cleaned = 0.00299917 Jy ! Component: 400 - total flux cleaned = 0.00332041 Jy ! Total flux subtracted in 400 components = 0.00332041 Jy ! Clean residual min=-0.001852 max=0.001739 Jy/beam ! Clean residual mean=0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.761724 Jy selfcal ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 348 components and 0.761724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065198Jy sigma=0.382939 ! Fit after self-cal, rms=0.065093Jy sigma=0.382422 wmodel /scr/pima/rdv95_uvs/J0958+4725_X_map.mod ! Writing 348 model components to file: /scr/pima/rdv95_uvs/J0958+4725_X_map.mod wobs /scr/pima/rdv95_uvs/J0958+4725_X_uvs.fits ! Applying 1207 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J0958+4725_X_uvs.fits wwins /scr/pima/rdv95_uvs/J0958+4725_X_map.win ! wwins: Wrote 15 windows to /scr/pima/rdv95_uvs/J0958+4725_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000380384 Jy ! Component: 100 - total flux cleaned = -0.000543858 Jy ! Component: 150 - total flux cleaned = -0.000830869 Jy ! Component: 200 - total flux cleaned = -0.00111138 Jy ! Component: 250 - total flux cleaned = -0.00123378 Jy ! Component: 300 - total flux cleaned = -0.0013543 Jy ! Component: 350 - total flux cleaned = -0.00144351 Jy ! Component: 400 - total flux cleaned = -0.00147293 Jy ! Component: 450 - total flux cleaned = -0.00153059 Jy ! Component: 500 - total flux cleaned = -0.00158772 Jy ! Component: 550 - total flux cleaned = -0.00150284 Jy ! Component: 600 - total flux cleaned = -0.00158721 Jy ! Component: 650 - total flux cleaned = -0.00155917 Jy ! Component: 700 - total flux cleaned = -0.00158667 Jy ! Component: 750 - total flux cleaned = -0.00144985 Jy ! Component: 800 - total flux cleaned = -0.00150436 Jy ! Component: 850 - total flux cleaned = -0.00147753 Jy ! Component: 900 - total flux cleaned = -0.00145097 Jy ! Component: 950 - total flux cleaned = -0.00153016 Jy ! Component: 1000 - total flux cleaned = -0.00145131 Jy ! Component: 1050 - total flux cleaned = -0.00145117 Jy ! Component: 1100 - total flux cleaned = -0.0013475 Jy ! Component: 1150 - total flux cleaned = -0.00142475 Jy ! Component: 1200 - total flux cleaned = -0.001425 Jy ! Component: 1250 - total flux cleaned = -0.00147598 Jy ! Component: 1300 - total flux cleaned = -0.00137474 Jy ! Component: 1350 - total flux cleaned = -0.00132468 Jy ! Component: 1400 - total flux cleaned = -0.00142464 Jy ! Component: 1450 - total flux cleaned = -0.00134988 Jy ! Component: 1500 - total flux cleaned = -0.00127603 Jy ! Component: 1550 - total flux cleaned = -0.00120236 Jy ! Component: 1600 - total flux cleaned = -0.00125126 Jy ! Component: 1650 - total flux cleaned = -0.00122721 Jy ! Component: 1700 - total flux cleaned = -0.00117886 Jy ! Component: 1750 - total flux cleaned = -0.00122704 Jy ! Component: 1800 - total flux cleaned = -0.00120309 Jy ! Component: 1850 - total flux cleaned = -0.00113157 Jy ! Component: 1900 - total flux cleaned = -0.00113147 Jy ! Component: 1950 - total flux cleaned = -0.0011314 Jy ! Component: 2000 - total flux cleaned = -0.00115502 Jy ! Component: 2050 - total flux cleaned = -0.00108494 Jy ! Component: 2100 - total flux cleaned = -0.00108476 Jy ! Component: 2150 - total flux cleaned = -0.00113114 Jy ! Component: 2200 - total flux cleaned = -0.000946349 Jy ! Component: 2250 - total flux cleaned = -0.00103838 Jy ! Component: 2300 - total flux cleaned = -0.000877741 Jy ! Component: 2350 - total flux cleaned = -0.000786527 Jy ! Component: 2400 - total flux cleaned = -0.000854727 Jy ! Component: 2450 - total flux cleaned = -0.000809408 Jy ! Component: 2500 - total flux cleaned = -0.000718985 Jy ! Component: 2550 - total flux cleaned = -0.000741314 Jy ! Component: 2600 - total flux cleaned = -0.000651777 Jy ! Component: 2650 - total flux cleaned = -0.000584915 Jy ! Component: 2700 - total flux cleaned = -0.000540683 Jy ! Component: 2750 - total flux cleaned = -0.00038567 Jy ! Component: 2800 - total flux cleaned = -0.000385744 Jy ! Component: 2850 - total flux cleaned = -0.000473622 Jy ! Component: 2900 - total flux cleaned = -0.000495532 Jy ! Component: 2950 - total flux cleaned = -0.000364632 Jy ! Component: 3000 - total flux cleaned = -0.000451484 Jy ! Component: 3050 - total flux cleaned = -0.000321593 Jy ! Component: 3100 - total flux cleaned = -0.000321421 Jy ! Component: 3150 - total flux cleaned = -0.000235461 Jy ! Component: 3200 - total flux cleaned = -0.000128392 Jy ! Component: 3250 - total flux cleaned = -0.00017109 Jy ! Component: 3300 - total flux cleaned = -0.000171157 Jy ! Component: 3350 - total flux cleaned = -0.000234942 Jy ! Component: 3400 - total flux cleaned = -0.000213795 Jy ! Component: 3450 - total flux cleaned = -0.000213981 Jy ! Component: 3500 - total flux cleaned = -0.000235055 Jy ! Component: 3550 - total flux cleaned = -0.000255971 Jy ! Component: 3600 - total flux cleaned = -0.000339311 Jy ! Component: 3650 - total flux cleaned = -0.00040157 Jy ! Component: 3700 - total flux cleaned = -0.00025652 Jy ! Component: 3750 - total flux cleaned = -0.000318517 Jy ! Component: 3800 - total flux cleaned = -0.00035979 Jy ! Component: 3850 - total flux cleaned = -0.000380332 Jy ! Component: 3900 - total flux cleaned = -0.000318889 Jy ! Component: 3950 - total flux cleaned = -0.000359713 Jy ! Component: 4000 - total flux cleaned = -0.000441123 Jy ! Component: 4050 - total flux cleaned = -0.000502008 Jy ! Total flux subtracted in 4096 components = -0.000481896 Jy ! Clean residual min=-0.001370 max=0.001131 Jy/beam ! Clean residual mean=0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.761242 Jy keep ! Adding 358 model components to the UV plane model. ! The established model now contains 704 components and 0.761242 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J0958+4725_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8384 x 1.104 at -23.87 degrees (North through East) ! Clean map min=-0.0021008 max=0.61151 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J0958+4725_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 2.4% of the data. ! The x-axis pixel size should ideally be below 0.1606 milli-arcsec ! The y-axis pixel size should ideally be below 0.1892 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.6115 rms= 0.00034 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J0958+4725_X_uvs.log closed on Wed Nov 6 20:45:46 2013