! Started logfile: /scr/pima/rdv95_uvs/J0836-2016_X_uvs.log on Wed Nov 6 20:44:52 2013 obs /scr/pima/rdv95_uvs/J0836-2016_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J0836-2016_X_uva.fits ! AN table 1: 28 integrations on 3 of 3 possible baselines. ! AN table 2: 12 integrations on 6 of 6 possible baselines. ! AN table 3: 4 integrations on 10 of 10 possible baselines. ! AN table 4: 4 integrations on 21 of 21 possible baselines. ! AN table 5: 4 integrations on 36 of 36 possible baselines. ! AN table 6: 2 integrations on 21 of 21 possible baselines. ! AN table 7: 2 integrations on 28 of 28 possible baselines. ! AN table 8: 2 integrations on 1 of 1 possible baselines. ! AN table 9: 2 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.915309 visibilities/baseline/integration-bin. ! Found source: J0836-2016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2248 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J0836-2016_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:MA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:FT self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 9:PT self-cal status=correctable weight=1 ! 9:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.891376Jy sigma=40.895716 ! Fit after self-cal, rms=0.686799Jy sigma=17.059095 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:MA ! Flagging baselines of antenna 1:MA in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:FT ! Flagging baselines of antenna 2:FT in the currently selected channels. flag 2:MA ! Flagging baselines of antenna 2:MA in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:MA ! Flagging baselines of antenna 3:MA in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:FT ! Flagging baselines of antenna 4:FT in the currently selected channels. flag 4:MA ! Flagging baselines of antenna 4:MA in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:FT ! Flagging baselines of antenna 5:FT in the currently selected channels. flag 5:MA ! Flagging baselines of antenna 5:MA in the currently selected channels. flag 6:FT ! Flagging baselines of antenna 6:FT in the currently selected channels. flag 8:FT ! Flagging baselines of antenna 8:FT in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9019 mas, bmaj=2.254 mas, bpa=-3.059 degrees ! Estimated noise=1.23793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.34892 Jy ! Component: 100 - total flux cleaned = 1.66694 Jy ! Total flux subtracted in 100 components = 1.66694 Jy ! Clean residual min=-0.045064 max=0.123587 Jy/beam ! Clean residual mean=-0.000090 rms=0.013664 Jy/beam ! Combined flux in latest and established models = 1.66694 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.66694 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 12 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.268924Jy sigma=6.748070 ! Fit after self-cal, rms=0.267825Jy sigma=6.786096 ! Inverting map and beam ! Estimated beam: bmin=0.8998 mas, bmaj=2.261 mas, bpa=-3.024 degrees ! Estimated noise=1.23625 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132776 Jy ! Component: 100 - total flux cleaned = 0.20437 Jy ! Total flux subtracted in 100 components = 0.20437 Jy ! Clean residual min=-0.038307 max=0.050645 Jy/beam ! Clean residual mean=-0.000061 rms=0.008346 Jy/beam ! Combined flux in latest and established models = 1.87131 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 1.87131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207008Jy sigma=4.294722 ! Fit after self-cal, rms=0.207051Jy sigma=4.293760 ! Inverting map ! Added new window around map position (-1.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509192 Jy ! Component: 100 - total flux cleaned = 0.0843126 Jy ! Total flux subtracted in 100 components = 0.0843126 Jy ! Clean residual min=-0.039436 max=0.039759 Jy/beam ! Clean residual mean=-0.000050 rms=0.007219 Jy/beam ! Combined flux in latest and established models = 1.95563 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 1.95563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191554Jy sigma=3.742278 ! Fit after self-cal, rms=0.191156Jy sigma=3.733952 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.118 mas, bmaj=2.679 mas, bpa=-3.945 degrees ! Estimated noise=1.01408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363469 Jy ! Component: 100 - total flux cleaned = 0.0587715 Jy ! Component: 150 - total flux cleaned = 0.0725876 Jy ! Component: 200 - total flux cleaned = 0.0764147 Jy ! Total flux subtracted in 200 components = 0.0764147 Jy ! Clean residual min=-0.037961 max=0.029123 Jy/beam ! Clean residual mean=-0.000208 rms=0.007384 Jy/beam ! Combined flux in latest and established models = 2.03204 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 2.03204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183431Jy sigma=3.503902 ! Fit after self-cal, rms=0.183202Jy sigma=3.497813 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* MA 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 FT 1.00* HN 1.14 MA 1.00* ! NL 1.24 SC 0.96 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 FT 1.00* HN 1.08 KP 1.02 ! LA 1.04 MA 1.00* NL 0.99 PT 1.00 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.98 FT 1.00* HN 1.01 KP 0.99 ! NL 0.95 PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 0.97 KP 1.00 LA 1.04 ! NL 0.94 OV 1.04 PT 0.98 SC 0.98 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 0.97 FD 0.99 HN 1.06 KP 0.98 ! LA 1.02 MK 1.01 NL 0.94 OV 0.97 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* MA 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.02 FT 1.00* HN 1.19 MA 1.00* ! NL 1.29 SC 0.99 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.00 FT 1.00* HN 1.10 KP 0.96 ! LA 1.00 MA 1.00* NL 1.02 PT 1.02 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.98 FT 1.00* HN 1.04 KP 0.95 ! NL 0.97 PT 0.99 SC 0.99 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.97 HN 1.01 KP 0.94 LA 1.02 ! NL 0.95 OV 1.01 PT 0.99 SC 1.00 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 0.98 FD 0.99 HN 1.10 KP 0.93 ! LA 0.98 MK 1.02 NL 0.95 OV 0.96 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* MA 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.00 FT 1.00* HN 1.19 MA 1.00* ! NL 1.31 SC 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.01 FT 1.00* HN 1.17 KP 0.88 ! LA 1.08 MA 1.00* NL 1.05 PT 1.02 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 FT 1.00* HN 1.04 KP 0.87 ! NL 0.99 PT 0.99 SC 0.99 ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 1.04 KP 0.86 LA 1.08 ! NL 0.98 OV 1.08 PT 0.99 SC 0.99 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.02 FD 0.99 HN 1.12 KP 0.85 ! LA 1.06 MK 1.03 NL 0.97 OV 1.04 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* MA 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* MA 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.07 FT 1.00* HN 1.17 MA 1.00* ! NL 1.28 SC 1.01 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.07 FT 1.00* HN 1.14 KP 0.93 ! LA 1.07 MA 1.00* NL 1.07 PT 1.08 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 FT 1.00* HN 1.08 KP 0.91 ! NL 1.02 PT 1.04 SC 1.01 ! ! Telescope amplitude corrections in sub-array 7: ! FD 1.04 HN 1.03 KP 0.91 LA 1.08 ! NL 1.00 OV 1.06 PT 1.04 SC 1.02 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FT 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00 FD 1.05 HN 1.14 KP 0.90 ! LA 1.04 MK 1.05 NL 1.00 OV 1.00 ! PT 1.03 SC 1.03 ! ! ! Fit before self-cal, rms=0.183202Jy sigma=3.497813 ! Fit after self-cal, rms=0.088096Jy sigma=1.598064 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.122 mas, bmaj=2.698 mas, bpa=-3.666 degrees ! Estimated noise=1.01866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.6, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120332 Jy ! Component: 100 - total flux cleaned = 0.0165827 Jy ! Component: 150 - total flux cleaned = 0.0191617 Jy ! Component: 200 - total flux cleaned = 0.0205561 Jy ! Total flux subtracted in 200 components = 0.0205561 Jy ! Clean residual min=-0.010868 max=0.014125 Jy/beam ! Clean residual mean=-0.000084 rms=0.002219 Jy/beam ! Combined flux in latest and established models = 2.0526 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 2.0526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084002Jy sigma=1.477073 ! Fit after self-cal, rms=0.083822Jy sigma=1.470034 ! Inverting map ! Added new window around map position (-3, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100953 Jy ! Component: 100 - total flux cleaned = 0.0101553 Jy ! Component: 150 - total flux cleaned = 0.0101298 Jy ! Component: 200 - total flux cleaned = 0.0101321 Jy ! Total flux subtracted in 200 components = 0.0101321 Jy ! Clean residual min=-0.009144 max=0.007923 Jy/beam ! Clean residual mean=-0.000101 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 2.06273 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 2.06273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079834Jy sigma=1.392654 ! Fit after self-cal, rms=0.079558Jy sigma=1.384705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079558Jy sigma=1.384705 ! Fit after self-cal, rms=0.078896Jy sigma=1.369752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.124 mas, bmaj=2.703 mas, bpa=-3.622 degrees ! Estimated noise=1.01813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000521128 Jy ! Component: 100 - total flux cleaned = -0.000240762 Jy ! Component: 150 - total flux cleaned = -1.67728e-05 Jy ! Component: 200 - total flux cleaned = 0.000415604 Jy ! Total flux subtracted in 200 components = 0.000415604 Jy ! Clean residual min=-0.007916 max=0.006548 Jy/beam ! Clean residual mean=-0.000071 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 2.06314 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 87 components and 2.06315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076712Jy sigma=1.331282 ! Fit after self-cal, rms=0.076653Jy sigma=1.328572 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020037 Jy ! Component: 100 - total flux cleaned = 0.0023863 Jy ! Component: 150 - total flux cleaned = 0.00256484 Jy ! Component: 200 - total flux cleaned = 0.00272898 Jy ! Total flux subtracted in 200 components = 0.00272898 Jy ! Clean residual min=-0.007354 max=0.006387 Jy/beam ! Clean residual mean=-0.000077 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 2.06587 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 100 components and 2.06587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075560Jy sigma=1.309483 ! Fit after self-cal, rms=0.075557Jy sigma=1.308259 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075557Jy sigma=1.308259 ! Fit after self-cal, rms=0.075228Jy sigma=1.302032 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.125 mas, bmaj=2.706 mas, bpa=-3.607 degrees ! Estimated noise=1.01799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200866 Jy ! Component: 100 - total flux cleaned = -0.00218517 Jy ! Component: 150 - total flux cleaned = -0.00202989 Jy ! Component: 200 - total flux cleaned = -0.00188661 Jy ! Total flux subtracted in 200 components = -0.00188661 Jy ! Clean residual min=-0.006945 max=0.006186 Jy/beam ! Clean residual mean=-0.000064 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 2.06399 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 104 components and 2.06399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074221Jy sigma=1.285900 ! Fit after self-cal, rms=0.074232Jy sigma=1.285198 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000911788 Jy ! Component: 100 - total flux cleaned = 0.00116943 Jy ! Component: 150 - total flux cleaned = 0.00117003 Jy ! Component: 200 - total flux cleaned = 0.00117167 Jy ! Total flux subtracted in 200 components = 0.00117167 Jy ! Clean residual min=-0.006618 max=0.006318 Jy/beam ! Clean residual mean=-0.000066 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 2.06516 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 108 components and 2.06516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073684Jy sigma=1.276913 ! Fit after self-cal, rms=0.073707Jy sigma=1.276604 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073707Jy sigma=1.276604 ! Fit after self-cal, rms=0.073481Jy sigma=1.273365 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=4.254 mas, bpa=-8.665 degrees ! Estimated noise=1.10955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012444 Jy ! Component: 100 - total flux cleaned = -0.0011343 Jy ! Component: 150 - total flux cleaned = -0.000946298 Jy ! Component: 200 - total flux cleaned = -0.00102699 Jy ! Total flux subtracted in 200 components = -0.00102699 Jy ! Clean residual min=-0.006238 max=0.006298 Jy/beam ! Clean residual mean=-0.000108 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 2.06413 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 129 components and 2.06413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073200Jy sigma=1.267719 ! Fit after self-cal, rms=0.073205Jy sigma=1.267347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450597 Jy ! Component: 100 - total flux cleaned = 0.000301853 Jy ! Component: 150 - total flux cleaned = 0.000162035 Jy ! Component: 200 - total flux cleaned = 3.05503e-05 Jy ! Total flux subtracted in 200 components = 3.05503e-05 Jy ! Clean residual min=-0.006058 max=0.006340 Jy/beam ! Clean residual mean=-0.000109 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 2.06416 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 136 components and 2.06416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073089Jy sigma=1.265003 ! Fit after self-cal, rms=0.073094Jy sigma=1.264852 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:FD,true ! 4:FD self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 9:BR,true ! 9:BR self-cal status=fixed weight=1 selfant 9:FD,true ! 9:FD self-cal status=fixed weight=1 selfant 9:HN,true ! 9:HN self-cal status=fixed weight=1 selfant 9:KP,true ! 9:KP self-cal status=fixed weight=1 selfant 9:LA,true ! 9:LA self-cal status=fixed weight=1 selfant 9:MK,true ! 9:MK self-cal status=fixed weight=1 selfant 9:NL,true ! 9:NL self-cal status=fixed weight=1 selfant 9:OV,true ! 9:OV self-cal status=fixed weight=1 selfant 9:PT,true ! 9:PT self-cal status=fixed weight=1 selfant 9:SC,true ! 9:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.766192Jy sigma=12.316028 ! Fit after self-cal, rms=0.150179Jy sigma=1.337618 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:MA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:FT self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 9:PT self-cal status=correctable weight=1 ! 9:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.150179Jy sigma=1.337618 ! Fit after self-cal, rms=0.137453Jy sigma=1.266037 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.7855 mas, bmaj=2.287 mas, bpa=-4.44 degrees ! Estimated noise=1.29865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793879 Jy ! Component: 100 - total flux cleaned = 0.00793965 Jy ! Component: 150 - total flux cleaned = 0.00829185 Jy ! Component: 200 - total flux cleaned = 0.00829848 Jy ! Total flux subtracted in 200 components = 0.00829848 Jy ! Clean residual min=-0.007467 max=0.008273 Jy/beam ! Clean residual mean=-0.000020 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 2.07246 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 153 components and 2.07246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132235Jy sigma=1.245291 ! Fit after self-cal, rms=0.132159Jy sigma=1.244385 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (-16.6, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044664 Jy ! Component: 100 - total flux cleaned = 0.00446242 Jy ! Component: 150 - total flux cleaned = 0.0044635 Jy ! Component: 200 - total flux cleaned = 0.00472799 Jy ! Total flux subtracted in 200 components = 0.00472799 Jy ! Clean residual min=-0.006924 max=0.007894 Jy/beam ! Clean residual mean=-0.000021 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 2.07719 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 166 components and 2.07719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128851Jy sigma=1.230024 ! Fit after self-cal, rms=0.128838Jy sigma=1.229589 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (2.8, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412736 Jy ! Component: 100 - total flux cleaned = 0.00463426 Jy ! Component: 150 - total flux cleaned = 0.00512208 Jy ! Component: 200 - total flux cleaned = 0.0048928 Jy ! Total flux subtracted in 200 components = 0.0048928 Jy ! Clean residual min=-0.006610 max=0.007232 Jy/beam ! Clean residual mean=-0.000021 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 2.08208 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 177 components and 2.08208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126618Jy sigma=1.218263 ! Fit after self-cal, rms=0.126520Jy sigma=1.217820 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (-6, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012513 Jy ! Component: 100 - total flux cleaned = 0.00151307 Jy ! Component: 150 - total flux cleaned = 0.00151108 Jy ! Component: 200 - total flux cleaned = 0.00150593 Jy ! Total flux subtracted in 200 components = 0.00150593 Jy ! Clean residual min=-0.006492 max=0.006755 Jy/beam ! Clean residual mean=-0.000021 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 2.08359 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 195 components and 2.08359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123843Jy sigma=1.207949 ! Fit after self-cal, rms=0.123800Jy sigma=1.207547 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (-24, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426523 Jy ! Component: 100 - total flux cleaned = 0.00426096 Jy ! Component: 150 - total flux cleaned = 0.00447797 Jy ! Component: 200 - total flux cleaned = 0.00510229 Jy ! Total flux subtracted in 200 components = 0.00510229 Jy ! Clean residual min=-0.006343 max=0.006295 Jy/beam ! Clean residual mean=-0.000018 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 2.08869 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 206 components and 2.08869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121865Jy sigma=1.200047 ! Fit after self-cal, rms=0.121842Jy sigma=1.199804 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (-23, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226617 Jy ! Component: 100 - total flux cleaned = 0.00329203 Jy ! Component: 150 - total flux cleaned = 0.00368516 Jy ! Component: 200 - total flux cleaned = 0.00387384 Jy ! Total flux subtracted in 200 components = 0.00387384 Jy ! Clean residual min=-0.006206 max=0.005903 Jy/beam ! Clean residual mean=-0.000019 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 2.09256 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 220 components and 2.09256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120222Jy sigma=1.192603 ! Fit after self-cal, rms=0.120192Jy sigma=1.192378 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9411 mas, bmaj=2.702 mas, bpa=-5.185 degrees ! Estimated noise=1.06355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, 12.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125388 Jy ! Component: 100 - total flux cleaned = 0.00102524 Jy ! Component: 150 - total flux cleaned = -0.000162739 Jy ! Component: 200 - total flux cleaned = -0.00109165 Jy ! Component: 250 - total flux cleaned = -0.00198545 Jy ! Component: 300 - total flux cleaned = -0.00301923 Jy ! Component: 350 - total flux cleaned = -0.00402202 Jy ! Component: 400 - total flux cleaned = -0.00515331 Jy ! Total flux subtracted in 400 components = -0.00515331 Jy ! Clean residual min=-0.005525 max=0.005992 Jy/beam ! Clean residual mean=-0.000055 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 2.08741 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 258 components and 2.08741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116735Jy sigma=1.173575 ! Fit after self-cal, rms=0.116657Jy sigma=1.172903 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (-2.4, -29.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476083 Jy ! Component: 100 - total flux cleaned = 0.00561183 Jy ! Component: 150 - total flux cleaned = 0.00639745 Jy ! Component: 200 - total flux cleaned = 0.00639429 Jy ! Component: 250 - total flux cleaned = 0.00624645 Jy ! Component: 300 - total flux cleaned = 0.00625336 Jy ! Component: 350 - total flux cleaned = 0.00597117 Jy ! Component: 400 - total flux cleaned = 0.00583441 Jy ! Total flux subtracted in 400 components = 0.00583441 Jy ! Clean residual min=-0.004919 max=0.005623 Jy/beam ! Clean residual mean=-0.000052 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 2.09325 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 298 components and 2.09324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114504Jy sigma=1.159492 ! Fit after self-cal, rms=0.114480Jy sigma=1.158611 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (25.8, -19.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261233 Jy ! Component: 100 - total flux cleaned = 0.00292337 Jy ! Component: 150 - total flux cleaned = 0.00334332 Jy ! Component: 200 - total flux cleaned = 0.00320824 Jy ! Component: 250 - total flux cleaned = 0.00333573 Jy ! Component: 300 - total flux cleaned = 0.00308137 Jy ! Component: 350 - total flux cleaned = 0.00307896 Jy ! Component: 400 - total flux cleaned = 0.00221794 Jy ! Total flux subtracted in 400 components = 0.00221794 Jy ! Clean residual min=-0.004839 max=0.005208 Jy/beam ! Clean residual mean=-0.000045 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 2.09546 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 332 components and 2.09546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112795Jy sigma=1.146592 ! Fit after self-cal, rms=0.112799Jy sigma=1.146095 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (-50.4, -50.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004526 Jy ! Component: 100 - total flux cleaned = 0.00571619 Jy ! Component: 150 - total flux cleaned = 0.00646751 Jy ! Component: 200 - total flux cleaned = 0.00719644 Jy ! Component: 250 - total flux cleaned = 0.00731398 Jy ! Component: 300 - total flux cleaned = 0.00743237 Jy ! Component: 350 - total flux cleaned = 0.0076586 Jy ! Component: 400 - total flux cleaned = 0.00754283 Jy ! Total flux subtracted in 400 components = 0.00754283 Jy ! Clean residual min=-0.004904 max=0.004489 Jy/beam ! Clean residual mean=-0.000040 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 2.10301 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 358 components and 2.10301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111307Jy sigma=1.134839 ! Fit after self-cal, rms=0.111322Jy sigma=1.134446 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130988 Jy ! Component: 100 - total flux cleaned = 0.00164733 Jy ! Component: 150 - total flux cleaned = 0.00164923 Jy ! Component: 200 - total flux cleaned = 0.00154189 Jy ! Component: 250 - total flux cleaned = 0.00111555 Jy ! Component: 300 - total flux cleaned = 0.00122429 Jy ! Component: 350 - total flux cleaned = 0.000909717 Jy ! Component: 400 - total flux cleaned = 0.000493947 Jy ! Total flux subtracted in 400 components = 0.000493947 Jy ! Clean residual min=-0.004840 max=0.004359 Jy/beam ! Clean residual mean=-0.000039 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 2.1035 Jy ! Performing phase self-cal ! Adding 105 model components to the UV plane model. ! The established model now contains 375 components and 2.1035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110093Jy sigma=1.128730 ! Fit after self-cal, rms=0.110096Jy sigma=1.128658 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 2 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.748718Jy sigma=12.257526 ! Fit after self-cal, rms=0.109886Jy sigma=1.121768 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9401 mas, bmaj=2.701 mas, bpa=-5.196 degrees ! Estimated noise=1.06374 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141144 Jy ! Component: 100 - total flux cleaned = 0.0011717 Jy ! Component: 150 - total flux cleaned = 0.000944821 Jy ! Component: 200 - total flux cleaned = 0.000945765 Jy ! Component: 250 - total flux cleaned = 0.000732614 Jy ! Component: 300 - total flux cleaned = 0.000630405 Jy ! Component: 350 - total flux cleaned = 0.000732764 Jy ! Component: 400 - total flux cleaned = 0.000528692 Jy ! Total flux subtracted in 400 components = 0.000528692 Jy ! Clean residual min=-0.003844 max=0.004150 Jy/beam ! Clean residual mean=-0.000038 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 2.10403 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 393 components and 2.10403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108471Jy sigma=1.115740 ! Fit after self-cal, rms=0.108482Jy sigma=1.115637 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, -27). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132582 Jy ! Component: 100 - total flux cleaned = 0.00157832 Jy ! Component: 150 - total flux cleaned = 0.00180184 Jy ! Component: 200 - total flux cleaned = 0.00212171 Jy ! Component: 250 - total flux cleaned = 0.00232531 Jy ! Component: 300 - total flux cleaned = 0.00222556 Jy ! Component: 350 - total flux cleaned = 0.00203281 Jy ! Component: 400 - total flux cleaned = 0.00203131 Jy ! Total flux subtracted in 400 components = 0.00203131 Jy ! Clean residual min=-0.003602 max=0.003635 Jy/beam ! Clean residual mean=-0.000036 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 2.10606 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 420 components and 2.10606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107536Jy sigma=1.107415 ! Fit after self-cal, rms=0.107513Jy sigma=1.107249 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (4, 17.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240897 Jy ! Component: 100 - total flux cleaned = 0.00323334 Jy ! Component: 150 - total flux cleaned = 0.00372527 Jy ! Component: 200 - total flux cleaned = 0.00430216 Jy ! Component: 250 - total flux cleaned = 0.00476776 Jy ! Component: 300 - total flux cleaned = 0.00522499 Jy ! Component: 350 - total flux cleaned = 0.0058552 Jy ! Component: 400 - total flux cleaned = 0.00611765 Jy ! Total flux subtracted in 400 components = 0.00611765 Jy ! Clean residual min=-0.003443 max=0.003610 Jy/beam ! Clean residual mean=-0.000032 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 2.11218 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 446 components and 2.11218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106705Jy sigma=1.101808 ! Fit after self-cal, rms=0.106689Jy sigma=1.101698 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (11.8, -25.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308995 Jy ! Component: 100 - total flux cleaned = 0.00417256 Jy ! Component: 150 - total flux cleaned = 0.00453736 Jy ! Component: 200 - total flux cleaned = 0.00489548 Jy ! Component: 250 - total flux cleaned = 0.0051562 Jy ! Component: 300 - total flux cleaned = 0.00524126 Jy ! Component: 350 - total flux cleaned = 0.00515581 Jy ! Component: 400 - total flux cleaned = 0.00523915 Jy ! Total flux subtracted in 400 components = 0.00523915 Jy ! Clean residual min=-0.003286 max=0.003295 Jy/beam ! Clean residual mean=-0.000025 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 2.11742 Jy ! Performing phase self-cal ! Adding 91 model components to the UV plane model. ! The established model now contains 471 components and 2.11742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106127Jy sigma=1.095255 ! Fit after self-cal, rms=0.106109Jy sigma=1.094989 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (7.2, 48.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263945 Jy ! Component: 100 - total flux cleaned = 0.00353322 Jy ! Component: 150 - total flux cleaned = 0.00421343 Jy ! Component: 200 - total flux cleaned = 0.00446297 Jy ! Component: 250 - total flux cleaned = 0.00454516 Jy ! Component: 300 - total flux cleaned = 0.0048653 Jy ! Component: 350 - total flux cleaned = 0.00502381 Jy ! Component: 400 - total flux cleaned = 0.00518085 Jy ! Total flux subtracted in 400 components = 0.00518085 Jy ! Clean residual min=-0.003207 max=0.002993 Jy/beam ! Clean residual mean=-0.000022 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 2.1226 Jy ! Performing phase self-cal ! Adding 102 model components to the UV plane model. ! The established model now contains 496 components and 2.1226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105515Jy sigma=1.089851 ! Fit after self-cal, rms=0.105510Jy sigma=1.089604 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105510Jy sigma=1.089604 ! Fit after self-cal, rms=0.105312Jy sigma=1.088508 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9402 mas, bmaj=2.701 mas, bpa=-5.193 degrees ! Estimated noise=1.06412 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211465 Jy ! Component: 100 - total flux cleaned = 0.00296685 Jy ! Component: 150 - total flux cleaned = 0.00362126 Jy ! Component: 200 - total flux cleaned = 0.00370124 Jy ! Component: 250 - total flux cleaned = 0.00393594 Jy ! Component: 300 - total flux cleaned = 0.00409043 Jy ! Component: 350 - total flux cleaned = 0.00454303 Jy ! Component: 400 - total flux cleaned = 0.00454079 Jy ! Total flux subtracted in 400 components = 0.00454079 Jy ! Clean residual min=-0.003129 max=0.002964 Jy/beam ! Clean residual mean=-0.000023 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 2.12714 Jy selfcal ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 522 components and 2.12714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104829Jy sigma=1.084836 ! Fit after self-cal, rms=0.104830Jy sigma=1.084739 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549584 Jy ! Component: 100 - total flux cleaned = 0.000919018 Jy ! Component: 150 - total flux cleaned = 0.00113944 Jy ! Component: 200 - total flux cleaned = 0.00128293 Jy ! Component: 250 - total flux cleaned = 0.00121168 Jy ! Component: 300 - total flux cleaned = 0.0013531 Jy ! Component: 350 - total flux cleaned = 0.00135408 Jy ! Component: 400 - total flux cleaned = 0.00149365 Jy ! Total flux subtracted in 400 components = 0.00149365 Jy ! Clean residual min=-0.003097 max=0.002894 Jy/beam ! Clean residual mean=-0.000022 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 2.12863 Jy ! Performing phase self-cal ! Adding 120 model components to the UV plane model. ! The established model now contains 537 components and 2.12863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104415Jy sigma=1.081812 ! Fit after self-cal, rms=0.104413Jy sigma=1.081762 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104413Jy sigma=1.081762 ! Fit after self-cal, rms=0.103776Jy sigma=1.061121 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=2.273 mas, bmaj=4.198 mas, bpa=-8.647 degrees ! Estimated noise=1.1153 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134884 Jy ! Component: 100 - total flux cleaned = 0.000656327 Jy ! Component: 150 - total flux cleaned = 0.0010621 Jy ! Component: 200 - total flux cleaned = 0.0013345 Jy ! Component: 250 - total flux cleaned = 0.00164321 Jy ! Component: 300 - total flux cleaned = 0.00189285 Jy ! Component: 350 - total flux cleaned = 0.00203673 Jy ! Component: 400 - total flux cleaned = 0.00222261 Jy ! Total flux subtracted in 400 components = 0.00222261 Jy ! Clean residual min=-0.002697 max=0.002555 Jy/beam ! Clean residual mean=-0.000045 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 2.13086 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 594 components and 2.13086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103740Jy sigma=1.058423 ! Fit after self-cal, rms=0.103749Jy sigma=1.058307 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407613 Jy ! Component: 100 - total flux cleaned = 0.000823342 Jy ! Component: 150 - total flux cleaned = 0.00108816 Jy ! Component: 200 - total flux cleaned = 0.00138791 Jy ! Component: 250 - total flux cleaned = 0.00142884 Jy ! Component: 300 - total flux cleaned = 0.00167395 Jy ! Component: 350 - total flux cleaned = 0.00187212 Jy ! Component: 400 - total flux cleaned = 0.00198874 Jy ! Total flux subtracted in 400 components = 0.00198874 Jy ! Clean residual min=-0.002626 max=0.002415 Jy/beam ! Clean residual mean=-0.000040 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 2.13284 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 623 components and 2.13284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103710Jy sigma=1.056693 ! Fit after self-cal, rms=0.103711Jy sigma=1.056645 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9402 mas, bmaj=2.701 mas, bpa=-5.19 degrees ! Estimated noise=1.06432 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9402 x 2.701 at -5.19 degrees (North through East) ! Clean map min=-0.0050893 max=1.7221 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103711Jy sigma=1.056645 ! Fit after self-cal, rms=0.098183Jy sigma=0.920586 ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9404 mas, bmaj=2.701 mas, bpa=-5.184 degrees ! Estimated noise=1.06434 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169831 Jy ! Component: 100 - total flux cleaned = 0.000692625 Jy ! Component: 150 - total flux cleaned = 0.0011028 Jy ! Component: 200 - total flux cleaned = 0.00133535 Jy ! Component: 250 - total flux cleaned = 0.0016369 Jy ! Component: 300 - total flux cleaned = 0.00192773 Jy ! Component: 350 - total flux cleaned = 0.00221031 Jy ! Component: 400 - total flux cleaned = 0.00227951 Jy ! Total flux subtracted in 400 components = 0.00227951 Jy ! Clean residual min=-0.003298 max=0.002855 Jy/beam ! Clean residual mean=-0.000007 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 2.13512 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 664 components and 2.13512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097675Jy sigma=0.915482 ! Fit after self-cal, rms=0.097675Jy sigma=0.915361 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014427 Jy ! Component: 100 - total flux cleaned = -8.63089e-06 Jy ! Component: 150 - total flux cleaned = 0.000191434 Jy ! Component: 200 - total flux cleaned = 0.00038932 Jy ! Component: 250 - total flux cleaned = 0.000389104 Jy ! Component: 300 - total flux cleaned = 0.000580006 Jy ! Component: 350 - total flux cleaned = 0.000516408 Jy ! Component: 400 - total flux cleaned = 0.000702072 Jy ! Total flux subtracted in 400 components = 0.000702072 Jy ! Clean residual min=-0.003268 max=0.002793 Jy/beam ! Clean residual mean=-0.000008 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 2.13582 Jy ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 686 components and 2.13582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097263Jy sigma=0.912446 ! Fit after self-cal, rms=0.097262Jy sigma=0.912402 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097262Jy sigma=0.912402 ! Fit after self-cal, rms=0.097229Jy sigma=0.912123 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.7853 mas, bmaj=2.285 mas, bpa=-4.439 degrees ! Estimated noise=1.30011 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32838 Jy ! Component: 100 - total flux cleaned = 1.65584 Jy ! Component: 150 - total flux cleaned = 1.79104 Jy ! Component: 200 - total flux cleaned = 1.85525 Jy ! Component: 250 - total flux cleaned = 1.89687 Jy ! Component: 300 - total flux cleaned = 1.92582 Jy ! Component: 350 - total flux cleaned = 1.94773 Jy ! Component: 400 - total flux cleaned = 1.96504 Jy ! Total flux subtracted in 400 components = 1.96504 Jy ! Clean residual min=-0.009919 max=0.013308 Jy/beam ! Clean residual mean=-0.000025 rms=0.002423 Jy/beam ! Combined flux in latest and established models = 1.96504 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 1.96504 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9405 mas, bmaj=2.701 mas, bpa=-5.185 degrees ! Estimated noise=1.0646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229679 Jy ! Component: 100 - total flux cleaned = 0.0334403 Jy ! Component: 150 - total flux cleaned = 0.041443 Jy ! Component: 200 - total flux cleaned = 0.0475655 Jy ! Component: 250 - total flux cleaned = 0.0539735 Jy ! Component: 300 - total flux cleaned = 0.0594824 Jy ! Component: 350 - total flux cleaned = 0.0648837 Jy ! Component: 400 - total flux cleaned = 0.0693984 Jy ! Total flux subtracted in 400 components = 0.0693984 Jy ! Clean residual min=-0.006392 max=0.007585 Jy/beam ! Clean residual mean=-0.000002 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 2.03444 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 120 components and 2.03444 Jy ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (1.2, 0.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716803 Jy ! Component: 100 - total flux cleaned = 0.0119241 Jy ! Component: 150 - total flux cleaned = 0.0151826 Jy ! Component: 200 - total flux cleaned = 0.0180744 Jy ! Component: 250 - total flux cleaned = 0.0208563 Jy ! Component: 300 - total flux cleaned = 0.0230822 Jy ! Component: 350 - total flux cleaned = 0.0254394 Jy ! Component: 400 - total flux cleaned = 0.0273109 Jy ! Total flux subtracted in 400 components = 0.0273109 Jy ! Clean residual min=-0.005688 max=0.004936 Jy/beam ! Clean residual mean=-0.000005 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 2.06175 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 162 components and 2.06175 Jy ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=2.272 mas, bmaj=4.198 mas, bpa=-8.655 degrees ! Estimated noise=1.11575 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384726 Jy ! Component: 100 - total flux cleaned = 0.007659 Jy ! Component: 150 - total flux cleaned = 0.0115863 Jy ! Component: 200 - total flux cleaned = 0.0150249 Jy ! Component: 250 - total flux cleaned = 0.0179249 Jy ! Component: 300 - total flux cleaned = 0.0207994 Jy ! Component: 350 - total flux cleaned = 0.0233949 Jy ! Component: 400 - total flux cleaned = 0.0256248 Jy ! Total flux subtracted in 400 components = 0.0256248 Jy ! Clean residual min=-0.004176 max=0.003880 Jy/beam ! Clean residual mean=-0.000020 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 2.08738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202547 Jy ! Component: 100 - total flux cleaned = 0.00374668 Jy ! Component: 150 - total flux cleaned = 0.00529719 Jy ! Component: 200 - total flux cleaned = 0.00690531 Jy ! Component: 250 - total flux cleaned = 0.00814785 Jy ! Component: 300 - total flux cleaned = 0.00945012 Jy ! Component: 350 - total flux cleaned = 0.0105183 Jy ! Component: 400 - total flux cleaned = 0.0117412 Jy ! Total flux subtracted in 400 components = 0.0117412 Jy ! Clean residual min=-0.003760 max=0.003557 Jy/beam ! Clean residual mean=-0.000019 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 2.09912 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 289 components and 2.09912 Jy ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Added new window around map position (14.8, 31.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229563 Jy ! Component: 100 - total flux cleaned = -0.0011376 Jy ! Component: 150 - total flux cleaned = -0.00164671 Jy ! Component: 200 - total flux cleaned = -0.00203325 Jy ! Component: 250 - total flux cleaned = -0.00203414 Jy ! Component: 300 - total flux cleaned = -0.00167793 Jy ! Component: 350 - total flux cleaned = -0.00167839 Jy ! Component: 400 - total flux cleaned = -0.00151064 Jy ! Total flux subtracted in 400 components = -0.00151064 Jy ! Clean residual min=-0.002972 max=0.002878 Jy/beam ! Clean residual mean=-0.000021 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 2.0976 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 338 components and 2.0976 Jy ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! Estimated beam: bmin=0.9405 mas, bmaj=2.701 mas, bpa=-5.185 degrees ! Estimated noise=1.0646 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447107 Jy ! Component: 100 - total flux cleaned = 7.11728e-05 Jy ! Component: 150 - total flux cleaned = -0.000108976 Jy ! Component: 200 - total flux cleaned = -0.000456801 Jy ! Component: 250 - total flux cleaned = -0.0006264 Jy ! Component: 300 - total flux cleaned = -0.000462178 Jy ! Component: 350 - total flux cleaned = -0.000147593 Jy ! Component: 400 - total flux cleaned = 0.000765206 Jy ! Total flux subtracted in 400 components = 0.000765206 Jy ! Clean residual min=-0.004200 max=0.004032 Jy/beam ! Clean residual mean=-0.000012 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 2.09837 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 371 components and 2.09837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098877Jy sigma=0.954671 ! Fit after self-cal, rms=0.098321Jy sigma=0.951234 wmodel /scr/pima/rdv95_uvs/J0836-2016_X_map.mod ! Writing 371 model components to file: /scr/pima/rdv95_uvs/J0836-2016_X_map.mod wobs /scr/pima/rdv95_uvs/J0836-2016_X_uvs.fits ! Applying 1384 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J0836-2016_X_uvs.fits wwins /scr/pima/rdv95_uvs/J0836-2016_X_map.win ! wwins: Wrote 20 windows to /scr/pima/rdv95_uvs/J0836-2016_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.50023e-06 Jy ! Component: 100 - total flux cleaned = 0.000204615 Jy ! Component: 150 - total flux cleaned = 0.000338241 Jy ! Component: 200 - total flux cleaned = 0.000338478 Jy ! Component: 250 - total flux cleaned = 0.000525802 Jy ! Component: 300 - total flux cleaned = 0.000828205 Jy ! Component: 350 - total flux cleaned = 0.0011246 Jy ! Component: 400 - total flux cleaned = 0.00153098 Jy ! Component: 450 - total flux cleaned = 0.0017028 Jy ! Component: 500 - total flux cleaned = 0.00192843 Jy ! Component: 550 - total flux cleaned = 0.00203984 Jy ! Component: 600 - total flux cleaned = 0.00209498 Jy ! Component: 650 - total flux cleaned = 0.00225632 Jy ! Component: 700 - total flux cleaned = 0.00220274 Jy ! Component: 750 - total flux cleaned = 0.00236098 Jy ! Component: 800 - total flux cleaned = 0.00262023 Jy ! Component: 850 - total flux cleaned = 0.00267115 Jy ! Component: 900 - total flux cleaned = 0.00287497 Jy ! Component: 950 - total flux cleaned = 0.00277345 Jy ! Component: 1000 - total flux cleaned = 0.00272442 Jy ! Component: 1050 - total flux cleaned = 0.00277425 Jy ! Component: 1100 - total flux cleaned = 0.00277437 Jy ! Component: 1150 - total flux cleaned = 0.00282353 Jy ! Component: 1200 - total flux cleaned = 0.00287188 Jy ! Component: 1250 - total flux cleaned = 0.00282375 Jy ! Component: 1300 - total flux cleaned = 0.00287176 Jy ! Component: 1350 - total flux cleaned = 0.00296598 Jy ! Component: 1400 - total flux cleaned = 0.00282484 Jy ! Component: 1450 - total flux cleaned = 0.00291805 Jy ! Component: 1500 - total flux cleaned = 0.00277915 Jy ! Component: 1550 - total flux cleaned = 0.00296335 Jy ! Component: 1600 - total flux cleaned = 0.00300919 Jy ! Component: 1650 - total flux cleaned = 0.00300891 Jy ! Component: 1700 - total flux cleaned = 0.00287378 Jy ! Component: 1750 - total flux cleaned = 0.00287417 Jy ! Component: 1800 - total flux cleaned = 0.00314188 Jy ! Component: 1850 - total flux cleaned = 0.00327455 Jy ! Component: 1900 - total flux cleaned = 0.00327463 Jy ! Component: 1950 - total flux cleaned = 0.00349396 Jy ! Component: 2000 - total flux cleaned = 0.00362478 Jy ! Component: 2050 - total flux cleaned = 0.00371147 Jy ! Component: 2100 - total flux cleaned = 0.00392674 Jy ! Component: 2150 - total flux cleaned = 0.00388387 Jy ! Component: 2200 - total flux cleaned = 0.00422431 Jy ! Component: 2250 - total flux cleaned = 0.00430872 Jy ! Component: 2300 - total flux cleaned = 0.00435097 Jy ! Component: 2350 - total flux cleaned = 0.00439245 Jy ! Component: 2400 - total flux cleaned = 0.00435069 Jy ! Component: 2450 - total flux cleaned = 0.0045995 Jy ! Component: 2500 - total flux cleaned = 0.0047643 Jy ! Component: 2550 - total flux cleaned = 0.00472327 Jy ! Component: 2600 - total flux cleaned = 0.00496835 Jy ! Component: 2650 - total flux cleaned = 0.00504958 Jy ! Component: 2700 - total flux cleaned = 0.00517071 Jy ! Component: 2750 - total flux cleaned = 0.00537173 Jy ! Component: 2800 - total flux cleaned = 0.00541183 Jy ! Component: 2850 - total flux cleaned = 0.00561081 Jy ! Component: 2900 - total flux cleaned = 0.00584891 Jy ! Component: 2950 - total flux cleaned = 0.00600682 Jy ! Component: 3000 - total flux cleaned = 0.00608552 Jy ! Component: 3050 - total flux cleaned = 0.00624193 Jy ! Component: 3100 - total flux cleaned = 0.00635851 Jy ! Component: 3150 - total flux cleaned = 0.00620358 Jy ! Component: 3200 - total flux cleaned = 0.00631947 Jy ! Component: 3250 - total flux cleaned = 0.00666511 Jy ! Component: 3300 - total flux cleaned = 0.00658885 Jy ! Component: 3350 - total flux cleaned = 0.00670318 Jy ! Component: 3400 - total flux cleaned = 0.00677891 Jy ! Component: 3450 - total flux cleaned = 0.00681663 Jy ! Component: 3500 - total flux cleaned = 0.00696712 Jy ! Component: 3550 - total flux cleaned = 0.00711667 Jy ! Component: 3600 - total flux cleaned = 0.00689275 Jy ! Component: 3650 - total flux cleaned = 0.00707873 Jy ! Component: 3700 - total flux cleaned = 0.00715267 Jy ! Component: 3750 - total flux cleaned = 0.00718942 Jy ! Component: 3800 - total flux cleaned = 0.00722614 Jy ! Component: 3850 - total flux cleaned = 0.0073356 Jy ! Component: 3900 - total flux cleaned = 0.00737197 Jy ! Component: 3950 - total flux cleaned = 0.00744474 Jy ! Component: 4000 - total flux cleaned = 0.00737236 Jy ! Component: 4050 - total flux cleaned = 0.00744436 Jy ! Total flux subtracted in 4096 components = 0.00748016 Jy ! Clean residual min=-0.002017 max=0.001938 Jy/beam ! Clean residual mean=-0.000008 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 2.10585 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 641 components and 2.10585 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J0836-2016_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9405 x 2.701 at -5.185 degrees (North through East) ! Clean map min=-0.0050463 max=1.7247 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J0836-2016_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 3.57% of the data. ! The x-axis pixel size should ideally be below 0.1869 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.7246 rms= 0.00062 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J0836-2016_X_uvs.log closed on Wed Nov 6 20:45:00 2013