! Started logfile: /scr/pima/rdv95_uvs/J0608-2220_S_uvs.log on Wed Nov 6 20:43:43 2013 obs /scr/pima/rdv95_uvs/J0608-2220_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J0608-2220_S_uva.fits ! AN table 1: 88 integrations on 3 of 3 possible baselines. ! AN table 2: 9 integrations on 15 of 15 possible baselines. ! AN table 3: 7 integrations on 36 of 36 possible baselines. ! AN table 4: 2 integrations on 10 of 10 possible baselines. ! AN table 5: 7 integrations on 36 of 36 possible baselines. ! AN table 6: 2 integrations on 15 of 15 possible baselines. ! AN table 7: 8 integrations on 36 of 36 possible baselines. ! AN table 8: 16 integrations on 55 of 55 possible baselines. ! Apparent sampling: 0.819425 visibilities/baseline/integration-bin. ! Found source: J0608-2220 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6952 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J0608-2220_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 41 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 41 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 41 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 31 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 41 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.282320Jy sigma=10.369416 ! Fit after self-cal, rms=0.312686Jy sigma=2.379258 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:MA ! Flagging baselines of antenna 1:MA in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:FT ! Flagging baselines of antenna 2:FT in the currently selected channels. flag 2:MA ! Flagging baselines of antenna 2:MA in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:MA ! Flagging baselines of antenna 3:MA in the currently selected channels. flag 5:FT ! Flagging baselines of antenna 5:FT in the currently selected channels. flag 7:FT ! Flagging baselines of antenna 7:FT in the currently selected channels. flag 8:FT ! Flagging baselines of antenna 8:FT in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.97 mas, bpa=-7.9 degrees ! Estimated noise=1.96183 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.560107 Jy ! Component: 100 - total flux cleaned = 0.682582 Jy ! Total flux subtracted in 100 components = 0.682582 Jy ! Clean residual min=-0.014014 max=0.038446 Jy/beam ! Clean residual mean=-0.000153 rms=0.004439 Jy/beam ! Combined flux in latest and established models = 0.682582 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.682582 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.140625Jy sigma=1.255567 ! Fit after self-cal, rms=0.140355Jy sigma=1.255453 ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.97 mas, bpa=-7.9 degrees ! Estimated noise=1.96427 mJy/beam. ! Added new window around map position (2.4, 7.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425368 Jy ! Component: 100 - total flux cleaned = 0.067054 Jy ! Total flux subtracted in 100 components = 0.067054 Jy ! Clean residual min=-0.011839 max=0.021164 Jy/beam ! Clean residual mean=-0.000084 rms=0.003409 Jy/beam ! Combined flux in latest and established models = 0.749636 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.749636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124977Jy sigma=1.069875 ! Fit after self-cal, rms=0.124830Jy sigma=1.069436 ! Inverting map ! Added new window around map position (10.8, 22.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021022 Jy ! Component: 100 - total flux cleaned = 0.0356505 Jy ! Total flux subtracted in 100 components = 0.0356505 Jy ! Clean residual min=-0.012012 max=0.014060 Jy/beam ! Clean residual mean=-0.000051 rms=0.003070 Jy/beam ! Combined flux in latest and established models = 0.785286 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.785286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119735Jy sigma=1.009410 ! Fit after self-cal, rms=0.119316Jy sigma=1.007543 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=9.922 mas, bpa=-8.926 degrees ! Estimated noise=1.29521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020312 Jy ! Component: 100 - total flux cleaned = 0.0335774 Jy ! Component: 150 - total flux cleaned = 0.0428489 Jy ! Component: 200 - total flux cleaned = 0.0494222 Jy ! Total flux subtracted in 200 components = 0.0494222 Jy ! Clean residual min=-0.008518 max=0.011201 Jy/beam ! Clean residual mean=-0.000055 rms=0.002468 Jy/beam ! Combined flux in latest and established models = 0.834708 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 72 components and 0.834708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116114Jy sigma=0.963561 ! Fit after self-cal, rms=0.115656Jy sigma=0.960343 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* FT 0.00* HN 0.00* MA 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 FT 1.00* HN 1.18 KP 1.00 ! LA 1.19 MA 1.00* NL 1.02 PT 1.04 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.13 KP 0.98 LA 1.20 NL 1.07 ! PT 1.06 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 FT 1.00* HN 1.07 KP 0.95 ! LA 1.17 NL 1.03 OV 1.00 PT 1.02 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 KP 0.97 LA 1.23 NL 0.98 ! OV 0.98 PT 1.06 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 FD 1.00 FT 1.00* HN 1.05 ! KP 0.94 NL 0.97 OV 0.95 PT 1.02 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 FD 0.98 FT 1.00* HN 1.09 ! KP 0.95 LA 1.15 MK 0.91 NL 0.94 ! OV 0.98 PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* FT 0.00* HN 0.00* MA 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 FT 1.00* HN 1.24 KP 1.09 ! LA 1.07 MA 1.00* NL 1.05 PT 1.02 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.18 KP 1.10 LA 1.09 NL 1.09 ! PT 0.98 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.05 FT 1.00* HN 1.06 KP 1.03 ! LA 1.06 NL 1.01 OV 1.03 PT 1.02 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.08 KP 1.04 LA 1.06 NL 1.03 ! OV 1.04 PT 1.05 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.05 FT 1.00* HN 1.08 ! KP 0.99 NL 0.99 OV 1.00 PT 1.02 ! SC 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 FD 1.04 FT 1.00* HN 1.12 ! KP 0.99 LA 1.03 MK 1.02 NL 1.00 ! OV 1.02 PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* FT 0.00* HN 0.00* MA 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.08 FT 1.00* HN 1.11 KP 1.08 ! LA 0.97 MA 1.00* NL 1.10 PT 1.03 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! HN 1.12 KP 1.11 LA 1.01 NL 1.16 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.03 FT 1.00* HN 1.03 KP 1.01 ! LA 0.97 NL 1.06 OV 1.06 PT 1.05 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.11 KP 1.04 LA 1.01 NL 1.06 ! OV 1.04 PT 1.05 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.29 FD 1.08 FT 1.00* HN 1.03 ! KP 0.99 NL 1.03 OV 1.00 PT 1.03 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.09 FD 1.06 FT 1.00* HN 1.07 ! KP 1.00 LA 0.96 MK 0.99 NL 1.03 ! OV 1.01 PT 1.04 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* MA 0.00* WZ 0.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.00* FT 0.00* HN 0.00* MA 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.07 FT 1.00* HN 1.03 KP 0.98 ! LA 0.81 MA 1.00* NL 1.04 PT 0.94 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.99 KP 0.99 LA 0.84 NL 1.03 ! PT 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! FD 1.04 FT 1.00* HN 0.91 KP 0.93 ! LA 0.82 NL 0.99 OV 0.88 PT 0.89 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 KP 0.95 LA 0.83 NL 1.00 ! OV 0.87 PT 0.93 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 1.04 FT 1.00* HN 0.86 ! KP 0.93 NL 0.95 OV 0.87 PT 0.90 ! SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.97 FD 1.03 FT 1.00* HN 0.93 ! KP 0.94 LA 0.80 MK 1.14 NL 0.96 ! OV 0.85 PT 0.90 SC 1.01 ! ! ! Fit before self-cal, rms=0.115656Jy sigma=0.960343 ! Fit after self-cal, rms=0.077069Jy sigma=0.609372 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=9.969 mas, bpa=-8.406 degrees ! Estimated noise=1.292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.2, 25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860984 Jy ! Component: 100 - total flux cleaned = 0.0110218 Jy ! Component: 150 - total flux cleaned = 0.0123125 Jy ! Component: 200 - total flux cleaned = 0.0132322 Jy ! Total flux subtracted in 200 components = 0.0132322 Jy ! Clean residual min=-0.004437 max=0.004250 Jy/beam ! Clean residual mean=-0.000032 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.847941 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 112 components and 0.847941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075715Jy sigma=0.595259 ! Fit after self-cal, rms=0.075666Jy sigma=0.594482 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075666Jy sigma=0.594482 ! Fit after self-cal, rms=0.075530Jy sigma=0.593765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=9.974 mas, bpa=-8.387 degrees ! Estimated noise=1.28942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000699509 Jy ! Component: 100 - total flux cleaned = 0.000120945 Jy ! Component: 150 - total flux cleaned = 0.000679787 Jy ! Component: 200 - total flux cleaned = 0.000871679 Jy ! Total flux subtracted in 200 components = 0.000871679 Jy ! Clean residual min=-0.003905 max=0.003853 Jy/beam ! Clean residual mean=-0.000028 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.848812 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.848812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075054Jy sigma=0.590313 ! Fit after self-cal, rms=0.075005Jy sigma=0.590006 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777756 Jy ! Component: 100 - total flux cleaned = 0.00102475 Jy ! Component: 150 - total flux cleaned = 0.00132415 Jy ! Component: 200 - total flux cleaned = 0.001529 Jy ! Total flux subtracted in 200 components = 0.001529 Jy ! Clean residual min=-0.003608 max=0.003733 Jy/beam ! Clean residual mean=-0.000025 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.850341 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 146 components and 0.850342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074821Jy sigma=0.588653 ! Fit after self-cal, rms=0.074796Jy sigma=0.588495 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074796Jy sigma=0.588495 ! Fit after self-cal, rms=0.073721Jy sigma=0.578927 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.911 mas, bmaj=9.973 mas, bpa=-8.329 degrees ! Estimated noise=1.2878 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739515 Jy ! Component: 100 - total flux cleaned = -0.00066764 Jy ! Component: 150 - total flux cleaned = -0.000666049 Jy ! Component: 200 - total flux cleaned = -0.000783778 Jy ! Total flux subtracted in 200 components = -0.000783778 Jy ! Clean residual min=-0.003192 max=0.002908 Jy/beam ! Clean residual mean=-0.000021 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.849558 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 161 components and 0.849558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073555Jy sigma=0.577836 ! Fit after self-cal, rms=0.073547Jy sigma=0.577772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136415 Jy ! Component: 100 - total flux cleaned = 0.000190094 Jy ! Component: 150 - total flux cleaned = 0.000139444 Jy ! Component: 200 - total flux cleaned = 0.000187867 Jy ! Total flux subtracted in 200 components = 0.000187867 Jy ! Clean residual min=-0.003170 max=0.002842 Jy/beam ! Clean residual mean=-0.000021 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.849746 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 0.849746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073465Jy sigma=0.577282 ! Fit after self-cal, rms=0.073459Jy sigma=0.577251 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073459Jy sigma=0.577251 ! Fit after self-cal, rms=0.073431Jy sigma=0.577057 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.452 mas, bmaj=18.25 mas, bpa=-10.38 degrees ! Estimated noise=1.44239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000897324 Jy ! Component: 100 - total flux cleaned = -0.000949646 Jy ! Component: 150 - total flux cleaned = -0.00108383 Jy ! Component: 200 - total flux cleaned = -0.00124346 Jy ! Total flux subtracted in 200 components = -0.00124346 Jy ! Clean residual min=-0.003379 max=0.003071 Jy/beam ! Clean residual mean=-0.000035 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.848502 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 181 components and 0.848502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073362Jy sigma=0.576763 ! Fit after self-cal, rms=0.073348Jy sigma=0.576659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216539 Jy ! Component: 100 - total flux cleaned = 0.000180333 Jy ! Component: 150 - total flux cleaned = 0.000180444 Jy ! Component: 200 - total flux cleaned = 0.000180161 Jy ! Total flux subtracted in 200 components = 0.000180161 Jy ! Clean residual min=-0.003363 max=0.003061 Jy/beam ! Clean residual mean=-0.000035 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.848682 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 190 components and 0.848682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073329Jy sigma=0.576600 ! Fit after self-cal, rms=0.073322Jy sigma=0.576550 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:KP,true ! 3:KP self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 3:PT,true ! 3:PT self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:KP,true ! 4:KP self-cal status=fixed weight=1 selfant 4:LA,true ! 4:LA self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:PT,true ! 4:PT self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 5:PT,true ! 5:PT self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:MK,true ! 8:MK self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 8:SC,true ! 8:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.383712Jy sigma=0.976445 ! Fit after self-cal, rms=0.102867Jy sigma=0.685776 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:MA self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:MA self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MA self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:PT self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:KP self-cal status=correctable weight=1 ! 4:LA self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:PT self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 5:PT self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:MK self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 28 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 28 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 28 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 5 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 28 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.102867Jy sigma=0.685776 ! Fit after self-cal, rms=0.085189Jy sigma=0.570847 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.992 mas, bpa=-7.689 degrees ! Estimated noise=2.02091 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012242 Jy ! Component: 100 - total flux cleaned = -0.00082986 Jy ! Component: 150 - total flux cleaned = -0.00118451 Jy ! Component: 200 - total flux cleaned = -0.00150231 Jy ! Total flux subtracted in 200 components = -0.00150231 Jy ! Clean residual min=-0.004734 max=0.004194 Jy/beam ! Clean residual mean=-0.000002 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.84718 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 215 components and 0.84718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085106Jy sigma=0.570650 ! Fit after self-cal, rms=0.085048Jy sigma=0.570400 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=9.98 mas, bpa=-8.487 degrees ! Estimated noise=1.2905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171773 Jy ! Component: 100 - total flux cleaned = 6.16734e-05 Jy ! Component: 150 - total flux cleaned = 0.000186832 Jy ! Component: 200 - total flux cleaned = 0.0002636 Jy ! Component: 250 - total flux cleaned = 0.000337844 Jy ! Component: 300 - total flux cleaned = 0.000373563 Jy ! Component: 350 - total flux cleaned = 0.000374404 Jy ! Component: 400 - total flux cleaned = 0.000407349 Jy ! Total flux subtracted in 400 components = 0.000407349 Jy ! Clean residual min=-0.003051 max=0.002744 Jy/beam ! Clean residual mean=-0.000022 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.847587 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 249 components and 0.847587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084951Jy sigma=0.569736 ! Fit after self-cal, rms=0.084970Jy sigma=0.569710 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.49217e-06 Jy ! Component: 100 - total flux cleaned = -9.10642e-06 Jy ! Component: 150 - total flux cleaned = 2.06859e-05 Jy ! Component: 200 - total flux cleaned = 2.00331e-05 Jy ! Component: 250 - total flux cleaned = 2.09467e-05 Jy ! Component: 300 - total flux cleaned = 4.91346e-05 Jy ! Component: 350 - total flux cleaned = 4.95372e-05 Jy ! Component: 400 - total flux cleaned = 7.59138e-05 Jy ! Total flux subtracted in 400 components = 7.59138e-05 Jy ! Clean residual min=-0.003019 max=0.002736 Jy/beam ! Clean residual mean=-0.000022 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.847663 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 266 components and 0.847663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084913Jy sigma=0.569392 ! Fit after self-cal, rms=0.084919Jy sigma=0.569381 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 44 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 44 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 25 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 44 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 34 telescope corrections were flagged in sub-array 2. ! A total of 23 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 7. ! A total of 44 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.384064Jy sigma=0.972529 ! Fit after self-cal, rms=0.084958Jy sigma=0.569251 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=9.98 mas, bpa=-8.455 degrees ! Estimated noise=1.29012 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000821338 Jy ! Component: 100 - total flux cleaned = -0.00101998 Jy ! Component: 150 - total flux cleaned = -0.00113935 Jy ! Component: 200 - total flux cleaned = -0.00116682 Jy ! Component: 250 - total flux cleaned = -0.00116733 Jy ! Component: 300 - total flux cleaned = -0.00121847 Jy ! Component: 350 - total flux cleaned = -0.00121872 Jy ! Component: 400 - total flux cleaned = -0.00119484 Jy ! Total flux subtracted in 400 components = -0.00119484 Jy ! Clean residual min=-0.002951 max=0.002714 Jy/beam ! Clean residual mean=-0.000022 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.846468 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 281 components and 0.846468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084897Jy sigma=0.568935 ! Fit after self-cal, rms=0.084906Jy sigma=0.568922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.89732e-05 Jy ! Component: 100 - total flux cleaned = -1.90906e-05 Jy ! Component: 150 - total flux cleaned = 4.69614e-06 Jy ! Component: 200 - total flux cleaned = 4.74073e-06 Jy ! Component: 250 - total flux cleaned = 5.27954e-06 Jy ! Component: 300 - total flux cleaned = 2.81607e-05 Jy ! Component: 350 - total flux cleaned = 5.07298e-05 Jy ! Component: 400 - total flux cleaned = 5.06067e-05 Jy ! Total flux subtracted in 400 components = 5.06067e-05 Jy ! Clean residual min=-0.002933 max=0.002701 Jy/beam ! Clean residual mean=-0.000022 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.846519 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 294 components and 0.846519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084864Jy sigma=0.568739 ! Fit after self-cal, rms=0.084866Jy sigma=0.568731 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084866Jy sigma=0.568731 ! Fit after self-cal, rms=0.084896Jy sigma=0.568635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=9.981 mas, bpa=-8.432 degrees ! Estimated noise=1.2899 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000720548 Jy ! Component: 100 - total flux cleaned = -0.00088762 Jy ! Component: 150 - total flux cleaned = -0.00101547 Jy ! Component: 200 - total flux cleaned = -0.00108818 Jy ! Component: 250 - total flux cleaned = -0.00113339 Jy ! Component: 300 - total flux cleaned = -0.0011548 Jy ! Component: 350 - total flux cleaned = -0.00113302 Jy ! Component: 400 - total flux cleaned = -0.001133 Jy ! Total flux subtracted in 400 components = -0.001133 Jy ! Clean residual min=-0.002884 max=0.002689 Jy/beam ! Clean residual mean=-0.000021 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.845386 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 304 components and 0.845386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084850Jy sigma=0.568400 ! Fit after self-cal, rms=0.084856Jy sigma=0.568391 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50237e-06 Jy ! Component: 100 - total flux cleaned = -1.50425e-05 Jy ! Component: 150 - total flux cleaned = -1.49429e-05 Jy ! Component: 200 - total flux cleaned = 5.53619e-06 Jy ! Component: 250 - total flux cleaned = 5.00691e-06 Jy ! Component: 300 - total flux cleaned = 2.4561e-05 Jy ! Component: 350 - total flux cleaned = 2.49701e-05 Jy ! Component: 400 - total flux cleaned = 4.44461e-05 Jy ! Total flux subtracted in 400 components = 4.44461e-05 Jy ! Clean residual min=-0.002864 max=0.002676 Jy/beam ! Clean residual mean=-0.000021 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.84543 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 311 components and 0.84543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084822Jy sigma=0.568250 ! Fit after self-cal, rms=0.084822Jy sigma=0.568244 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084822Jy sigma=0.568244 ! Fit after self-cal, rms=0.083447Jy sigma=0.558684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.429 mas, bmaj=18.12 mas, bpa=-10.35 degrees ! Estimated noise=1.43819 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000728722 Jy ! Component: 100 - total flux cleaned = -0.000838795 Jy ! Component: 150 - total flux cleaned = -0.000901696 Jy ! Component: 200 - total flux cleaned = -0.000957129 Jy ! Component: 250 - total flux cleaned = -0.000991094 Jy ! Component: 300 - total flux cleaned = -0.00100658 Jy ! Component: 350 - total flux cleaned = -0.00102125 Jy ! Component: 400 - total flux cleaned = -0.00103605 Jy ! Total flux subtracted in 400 components = -0.00103605 Jy ! Clean residual min=-0.003020 max=0.002982 Jy/beam ! Clean residual mean=-0.000039 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.844394 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 326 components and 0.844394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083440Jy sigma=0.558576 ! Fit after self-cal, rms=0.083432Jy sigma=0.558543 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.10968e-05 Jy ! Component: 100 - total flux cleaned = 3.97401e-05 Jy ! Component: 150 - total flux cleaned = 2.52748e-05 Jy ! Component: 200 - total flux cleaned = 3.91292e-05 Jy ! Component: 250 - total flux cleaned = 3.90477e-05 Jy ! Component: 300 - total flux cleaned = 2.62918e-05 Jy ! Component: 350 - total flux cleaned = 3.85239e-05 Jy ! Component: 400 - total flux cleaned = 2.61698e-05 Jy ! Total flux subtracted in 400 components = 2.61698e-05 Jy ! Clean residual min=-0.002998 max=0.002999 Jy/beam ! Clean residual mean=-0.000039 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.84442 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 336 components and 0.84442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083428Jy sigma=0.558539 ! Fit after self-cal, rms=0.083427Jy sigma=0.558524 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=9.985 mas, bpa=-8.402 degrees ! Estimated noise=1.28988 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.804 x 9.985 at -8.402 degrees (North through East) ! Clean map min=-0.0026705 max=0.71571 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083427Jy sigma=0.558524 ! Fit after self-cal, rms=0.079166Jy sigma=0.522269 ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=9.979 mas, bpa=-8.4 degrees ! Estimated noise=1.28919 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003178 Jy ! Component: 100 - total flux cleaned = -0.000403349 Jy ! Component: 150 - total flux cleaned = -0.000427734 Jy ! Component: 200 - total flux cleaned = -0.000428932 Jy ! Component: 250 - total flux cleaned = -0.000429181 Jy ! Component: 300 - total flux cleaned = -0.000428964 Jy ! Component: 350 - total flux cleaned = -0.000428944 Jy ! Component: 400 - total flux cleaned = -0.00042891 Jy ! Total flux subtracted in 400 components = -0.00042891 Jy ! Clean residual min=-0.002690 max=0.002613 Jy/beam ! Clean residual mean=-0.000023 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.843992 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 346 components and 0.843991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079115Jy sigma=0.522085 ! Fit after self-cal, rms=0.079122Jy sigma=0.522077 ! Inverting map ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5472e-06 Jy ! Component: 100 - total flux cleaned = -3.28839e-05 Jy ! Component: 150 - total flux cleaned = -3.26672e-05 Jy ! Component: 200 - total flux cleaned = -1.37974e-05 Jy ! Component: 250 - total flux cleaned = -1.36038e-05 Jy ! Component: 300 - total flux cleaned = 4.15197e-06 Jy ! Component: 350 - total flux cleaned = 4.23046e-06 Jy ! Component: 400 - total flux cleaned = 2.15519e-05 Jy ! Total flux subtracted in 400 components = 2.15519e-05 Jy ! Clean residual min=-0.002692 max=0.002596 Jy/beam ! Clean residual mean=-0.000023 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.844013 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 355 components and 0.844013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079088Jy sigma=0.521964 ! Fit after self-cal, rms=0.079091Jy sigma=0.521959 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079091Jy sigma=0.521959 ! Fit after self-cal, rms=0.079110Jy sigma=0.521926 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=7.98 mas, bpa=-7.616 degrees ! Estimated noise=2.02068 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.557635 Jy ! Component: 100 - total flux cleaned = 0.679646 Jy ! Component: 150 - total flux cleaned = 0.71708 Jy ! Component: 200 - total flux cleaned = 0.740361 Jy ! Component: 250 - total flux cleaned = 0.757606 Jy ! Component: 300 - total flux cleaned = 0.77117 Jy ! Component: 350 - total flux cleaned = 0.782108 Jy ! Component: 400 - total flux cleaned = 0.791145 Jy ! Total flux subtracted in 400 components = 0.791145 Jy ! Clean residual min=-0.006213 max=0.007374 Jy/beam ! Clean residual mean=-0.000044 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.791145 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 76 model components to the UV plane model. ! The established model now contains 76 components and 0.791145 Jy ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=9.978 mas, bpa=-8.385 degrees ! Estimated noise=1.28896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.6, 12.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149588 Jy ! Component: 100 - total flux cleaned = 0.0243932 Jy ! Component: 150 - total flux cleaned = 0.0310812 Jy ! Component: 200 - total flux cleaned = 0.0360841 Jy ! Component: 250 - total flux cleaned = 0.0400185 Jy ! Component: 300 - total flux cleaned = 0.0431468 Jy ! Component: 350 - total flux cleaned = 0.04565 Jy ! Component: 400 - total flux cleaned = 0.0476675 Jy ! Total flux subtracted in 400 components = 0.0476675 Jy ! Clean residual min=-0.003136 max=0.003137 Jy/beam ! Clean residual mean=-0.000031 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.838812 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 177 components and 0.838812 Jy ! Inverting map ! Added new window around map position (-9.2, -9.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016805 Jy ! Component: 100 - total flux cleaned = 0.00231996 Jy ! Component: 150 - total flux cleaned = 0.00281051 Jy ! Component: 200 - total flux cleaned = 0.00324852 Jy ! Component: 250 - total flux cleaned = 0.00339997 Jy ! Component: 300 - total flux cleaned = 0.00363511 Jy ! Component: 350 - total flux cleaned = 0.00380968 Jy ! Component: 400 - total flux cleaned = 0.0039331 Jy ! Total flux subtracted in 400 components = 0.0039331 Jy ! Clean residual min=-0.002624 max=0.002410 Jy/beam ! Clean residual mean=-0.000025 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.842745 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 230 components and 0.842745 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.434 mas, bmaj=18.12 mas, bpa=-10.33 degrees ! Estimated noise=1.43717 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104302 Jy ! Component: 100 - total flux cleaned = 0.00170776 Jy ! Component: 150 - total flux cleaned = 0.00189338 Jy ! Component: 200 - total flux cleaned = 0.00208508 Jy ! Component: 250 - total flux cleaned = 0.00219748 Jy ! Component: 300 - total flux cleaned = 0.00230395 Jy ! Component: 350 - total flux cleaned = 0.00236459 Jy ! Component: 400 - total flux cleaned = 0.00240424 Jy ! Total flux subtracted in 400 components = 0.00240424 Jy ! Clean residual min=-0.002714 max=0.002854 Jy/beam ! Clean residual mean=-0.000036 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.845149 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (99.6, 31.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233937 Jy ! Component: 100 - total flux cleaned = 0.00320972 Jy ! Component: 150 - total flux cleaned = 0.00343399 Jy ! Component: 200 - total flux cleaned = 0.00343555 Jy ! Component: 250 - total flux cleaned = 0.00347037 Jy ! Component: 300 - total flux cleaned = 0.00347064 Jy ! Component: 350 - total flux cleaned = 0.0034408 Jy ! Component: 400 - total flux cleaned = 0.00346744 Jy ! Total flux subtracted in 400 components = 0.00346744 Jy ! Clean residual min=-0.002149 max=0.002415 Jy/beam ! Clean residual mean=-0.000028 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.848617 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 332 components and 0.848617 Jy ! Inverting map ! Added new window around map position (-62, 43.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158026 Jy ! Component: 100 - total flux cleaned = 0.00184187 Jy ! Component: 150 - total flux cleaned = 0.00211902 Jy ! Component: 200 - total flux cleaned = 0.00246195 Jy ! Component: 250 - total flux cleaned = 0.002509 Jy ! Component: 300 - total flux cleaned = 0.00254946 Jy ! Component: 350 - total flux cleaned = 0.00243428 Jy ! Component: 400 - total flux cleaned = 0.00243384 Jy ! Total flux subtracted in 400 components = 0.00243384 Jy ! Clean residual min=-0.001990 max=0.002079 Jy/beam ! Clean residual mean=-0.000031 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.851051 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 397 components and 0.85105 Jy ! Inverting map ! Added new window around map position (18.8, 86). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126539 Jy ! Component: 100 - total flux cleaned = 0.00114531 Jy ! Component: 150 - total flux cleaned = 0.0010952 Jy ! Component: 200 - total flux cleaned = 0.00118116 Jy ! Component: 250 - total flux cleaned = 0.00134492 Jy ! Component: 300 - total flux cleaned = 0.00134566 Jy ! Component: 350 - total flux cleaned = 0.00127067 Jy ! Component: 400 - total flux cleaned = 0.00127123 Jy ! Total flux subtracted in 400 components = 0.00127123 Jy ! Clean residual min=-0.001910 max=0.001644 Jy/beam ! Clean residual mean=-0.000031 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.852322 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 478 components and 0.852322 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=9.978 mas, bpa=-8.385 degrees ! Estimated noise=1.28896 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000774818 Jy ! Component: 100 - total flux cleaned = -0.00104456 Jy ! Component: 150 - total flux cleaned = -0.00123752 Jy ! Component: 200 - total flux cleaned = -0.0013615 Jy ! Component: 250 - total flux cleaned = -0.00148122 Jy ! Component: 300 - total flux cleaned = -0.00159591 Jy ! Component: 350 - total flux cleaned = -0.00159581 Jy ! Component: 400 - total flux cleaned = -0.00154217 Jy ! Total flux subtracted in 400 components = -0.00154217 Jy ! Clean residual min=-0.002069 max=0.001819 Jy/beam ! Clean residual mean=-0.000018 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.850779 Jy selfcal ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 552 components and 0.850779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078524Jy sigma=0.516262 ! Fit after self-cal, rms=0.078539Jy sigma=0.516013 wmodel /scr/pima/rdv95_uvs/J0608-2220_S_map.mod ! Writing 552 model components to file: /scr/pima/rdv95_uvs/J0608-2220_S_map.mod wobs /scr/pima/rdv95_uvs/J0608-2220_S_uvs.fits ! Applying 2018 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J0608-2220_S_uvs.fits wwins /scr/pima/rdv95_uvs/J0608-2220_S_map.win ! wwins: Wrote 9 windows to /scr/pima/rdv95_uvs/J0608-2220_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00086093 Jy ! Component: 100 - total flux cleaned = -0.0013011 Jy ! Component: 150 - total flux cleaned = -0.00155482 Jy ! Component: 200 - total flux cleaned = -0.00179801 Jy ! Component: 250 - total flux cleaned = -0.00209222 Jy ! Component: 300 - total flux cleaned = -0.00240614 Jy ! Component: 350 - total flux cleaned = -0.00273904 Jy ! Component: 400 - total flux cleaned = -0.00306247 Jy ! Component: 450 - total flux cleaned = -0.0032999 Jy ! Component: 500 - total flux cleaned = -0.00350773 Jy ! Component: 550 - total flux cleaned = -0.00363573 Jy ! Component: 600 - total flux cleaned = -0.00383736 Jy ! Component: 650 - total flux cleaned = -0.00401102 Jy ! Component: 700 - total flux cleaned = -0.00418262 Jy ! Component: 750 - total flux cleaned = -0.00432809 Jy ! Component: 800 - total flux cleaned = -0.00447169 Jy ! Component: 850 - total flux cleaned = -0.00463766 Jy ! Component: 900 - total flux cleaned = -0.00473169 Jy ! Component: 950 - total flux cleaned = -0.00489459 Jy ! Component: 1000 - total flux cleaned = -0.00503247 Jy ! Component: 1050 - total flux cleaned = -0.00514618 Jy ! Component: 1100 - total flux cleaned = -0.00525895 Jy ! Component: 1150 - total flux cleaned = -0.00541537 Jy ! Component: 1200 - total flux cleaned = -0.00554832 Jy ! Component: 1250 - total flux cleaned = -0.00559225 Jy ! Component: 1300 - total flux cleaned = -0.00570124 Jy ! Component: 1350 - total flux cleaned = -0.00580939 Jy ! Component: 1400 - total flux cleaned = -0.00587384 Jy ! Component: 1450 - total flux cleaned = -0.00604409 Jy ! Component: 1500 - total flux cleaned = -0.00610737 Jy ! Component: 1550 - total flux cleaned = -0.00617029 Jy ! Component: 1600 - total flux cleaned = -0.00629499 Jy ! Component: 1650 - total flux cleaned = -0.00631581 Jy ! Component: 1700 - total flux cleaned = -0.00645951 Jy ! Component: 1750 - total flux cleaned = -0.00658176 Jy ! Component: 1800 - total flux cleaned = -0.00654103 Jy ! Component: 1850 - total flux cleaned = -0.00660162 Jy ! Component: 1900 - total flux cleaned = -0.00666173 Jy ! Component: 1950 - total flux cleaned = -0.00674116 Jy ! Component: 2000 - total flux cleaned = -0.00676096 Jy ! Component: 2050 - total flux cleaned = -0.00676075 Jy ! Component: 2100 - total flux cleaned = -0.00685836 Jy ! Component: 2150 - total flux cleaned = -0.00693597 Jy ! Component: 2200 - total flux cleaned = -0.0069357 Jy ! Component: 2250 - total flux cleaned = -0.00705089 Jy ! Component: 2300 - total flux cleaned = -0.00703161 Jy ! Component: 2350 - total flux cleaned = -0.00708855 Jy ! Component: 2400 - total flux cleaned = -0.00706971 Jy ! Component: 2450 - total flux cleaned = -0.00714494 Jy ! Component: 2500 - total flux cleaned = -0.00710758 Jy ! Component: 2550 - total flux cleaned = -0.00718216 Jy ! Component: 2600 - total flux cleaned = -0.00723779 Jy ! Component: 2650 - total flux cleaned = -0.00738498 Jy ! Component: 2700 - total flux cleaned = -0.00736659 Jy ! Component: 2750 - total flux cleaned = -0.00736635 Jy ! Component: 2800 - total flux cleaned = -0.00745708 Jy ! Component: 2850 - total flux cleaned = -0.00743906 Jy ! Component: 2900 - total flux cleaned = -0.00752909 Jy ! Component: 2950 - total flux cleaned = -0.00758283 Jy ! Component: 3000 - total flux cleaned = -0.00765423 Jy ! Component: 3050 - total flux cleaned = -0.00767195 Jy ! Component: 3100 - total flux cleaned = -0.00770741 Jy ! Component: 3150 - total flux cleaned = -0.00772503 Jy ! Component: 3200 - total flux cleaned = -0.00776001 Jy ! Component: 3250 - total flux cleaned = -0.00779497 Jy ! Component: 3300 - total flux cleaned = -0.00776025 Jy ! Component: 3350 - total flux cleaned = -0.00781226 Jy ! Component: 3400 - total flux cleaned = -0.00782952 Jy ! Component: 3450 - total flux cleaned = -0.00789827 Jy ! Component: 3500 - total flux cleaned = -0.00784683 Jy ! Component: 3550 - total flux cleaned = -0.00788086 Jy ! Component: 3600 - total flux cleaned = -0.00784698 Jy ! Component: 3650 - total flux cleaned = -0.00793142 Jy ! Component: 3700 - total flux cleaned = -0.00794816 Jy ! Component: 3750 - total flux cleaned = -0.00788099 Jy ! Component: 3800 - total flux cleaned = -0.0079143 Jy ! Component: 3850 - total flux cleaned = -0.00791438 Jy ! Component: 3900 - total flux cleaned = -0.00789788 Jy ! Component: 3950 - total flux cleaned = -0.00796396 Jy ! Component: 4000 - total flux cleaned = -0.00789824 Jy ! Component: 4050 - total flux cleaned = -0.00801306 Jy ! Total flux subtracted in 4096 components = -0.00799675 Jy ! Clean residual min=-0.000937 max=0.000850 Jy/beam ! Clean residual mean=-0.000007 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.842783 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 800 components and 0.842783 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J0608-2220_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.804 x 9.978 at -8.385 degrees (North through East) ! Clean map min=-0.0021051 max=0.7125 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J0608-2220_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.7125 rms= 0.00031 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J0608-2220_S_uvs.log closed on Wed Nov 6 20:43:50 2013