! Started logfile: /scr/pima/rdv95_uvs/J0322+3948_S_uvs.log on Wed Nov 6 20:42:21 2013 obs /scr/pima/rdv95_uvs/J0322+3948_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv95_uvs/J0322+3948_S_uva.fits ! AN table 1: 44 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.988889 visibilities/baseline/integration-bin. ! Found source: J0322+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7832 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv95_uvs/J0322+3948_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.004401Jy sigma=1.310642 ! Fit after self-cal, rms=0.916872Jy sigma=1.186826 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=4.781 mas, bpa=-12.68 degrees ! Estimated noise=13.2343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0644497 Jy ! Component: 100 - total flux cleaned = 0.081058 Jy ! Total flux subtracted in 100 components = 0.081058 Jy ! Clean residual min=-0.004016 max=0.007185 Jy/beam ! Clean residual mean=0.000013 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.081058 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.081058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053282Jy sigma=0.064413 ! Fit after self-cal, rms=0.053296Jy sigma=0.064383 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783159 Jy ! Component: 100 - total flux cleaned = 0.0117022 Jy ! Total flux subtracted in 100 components = 0.0117022 Jy ! Clean residual min=-0.003392 max=0.003008 Jy/beam ! Clean residual mean=0.000015 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.0927602 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.0927602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052190Jy sigma=0.062346 ! Fit after self-cal, rms=0.052221Jy sigma=0.062339 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.61 mas, bmaj=5.935 mas, bpa=-11.55 degrees ! Estimated noise=6.35028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236895 Jy ! Component: 100 - total flux cleaned = 0.00349391 Jy ! Component: 150 - total flux cleaned = 0.0040069 Jy ! Component: 200 - total flux cleaned = 0.00414373 Jy ! Total flux subtracted in 200 components = 0.00414373 Jy ! Clean residual min=-0.002085 max=0.001981 Jy/beam ! Clean residual mean=0.000009 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0969039 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.0969039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052138Jy sigma=0.062170 ! Fit after self-cal, rms=0.052148Jy sigma=0.062169 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.01 KP 0.96 ! LA 1.17 MK 1.00 NL 1.00 OV 0.97 ! PT 1.06 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 1.02 KP 0.99 ! LA 1.03 MK 1.05 NL 1.07 OV 1.03 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.07 HN 1.01 KP 1.01 ! LA 0.96 MK 1.00 NL 1.07 OV 1.02 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.08 HN 0.89 KP 0.95 ! LA 0.79 MK 1.05 NL 0.98 OV 0.90 ! PT 0.92 SC 0.95 ! ! ! Fit before self-cal, rms=0.052148Jy sigma=0.062169 ! Fit after self-cal, rms=0.050406Jy sigma=0.060681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.606 mas, bmaj=5.899 mas, bpa=-10.15 degrees ! Estimated noise=6.31049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.43524e-05 Jy ! Component: 100 - total flux cleaned = -2.97368e-05 Jy ! Component: 150 - total flux cleaned = 5.7468e-06 Jy ! Component: 200 - total flux cleaned = 3.67036e-05 Jy ! Total flux subtracted in 200 components = 3.67036e-05 Jy ! Clean residual min=-0.001620 max=0.001625 Jy/beam ! Clean residual mean=0.000021 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0969406 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0969406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050395Jy sigma=0.060676 ! Fit after self-cal, rms=0.050420Jy sigma=0.060661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050420Jy sigma=0.060661 ! Fit after self-cal, rms=0.050212Jy sigma=0.060659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.6 mas, bmaj=5.892 mas, bpa=-10.12 degrees ! Estimated noise=6.29299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100415 Jy ! Component: 100 - total flux cleaned = -7.90071e-05 Jy ! Component: 150 - total flux cleaned = -3.4102e-05 Jy ! Component: 200 - total flux cleaned = -2.49883e-06 Jy ! Total flux subtracted in 200 components = -2.49883e-06 Jy ! Clean residual min=-0.001600 max=0.001614 Jy/beam ! Clean residual mean=0.000022 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0969381 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.0969381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050203Jy sigma=0.060656 ! Fit after self-cal, rms=0.050204Jy sigma=0.060656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23401e-05 Jy ! Component: 100 - total flux cleaned = 5.33277e-05 Jy ! Component: 150 - total flux cleaned = 7.77015e-05 Jy ! Component: 200 - total flux cleaned = 8.92431e-05 Jy ! Total flux subtracted in 200 components = 8.92431e-05 Jy ! Clean residual min=-0.001590 max=0.001600 Jy/beam ! Clean residual mean=0.000022 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0970274 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.0970274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050201Jy sigma=0.060654 ! Fit after self-cal, rms=0.050202Jy sigma=0.060654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050202Jy sigma=0.060654 ! Fit after self-cal, rms=0.050170Jy sigma=0.060515 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.588 mas, bmaj=5.851 mas, bpa=-9.608 degrees ! Estimated noise=6.27683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170586 Jy ! Component: 100 - total flux cleaned = 0.000221182 Jy ! Component: 150 - total flux cleaned = 0.00025225 Jy ! Component: 200 - total flux cleaned = 0.000279475 Jy ! Total flux subtracted in 200 components = 0.000279475 Jy ! Clean residual min=-0.001583 max=0.001584 Jy/beam ! Clean residual mean=0.000020 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0973068 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.0973068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050160Jy sigma=0.060511 ! Fit after self-cal, rms=0.050167Jy sigma=0.060509 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.17267e-06 Jy ! Component: 100 - total flux cleaned = -1.11834e-06 Jy ! Component: 150 - total flux cleaned = -8.13588e-06 Jy ! Component: 200 - total flux cleaned = -1.4682e-05 Jy ! Total flux subtracted in 200 components = -1.4682e-05 Jy ! Clean residual min=-0.001577 max=0.001577 Jy/beam ! Clean residual mean=0.000020 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0972921 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.0972921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050163Jy sigma=0.060507 ! Fit after self-cal, rms=0.050164Jy sigma=0.060507 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050164Jy sigma=0.060507 ! Fit after self-cal, rms=0.050022Jy sigma=0.060500 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.38 mas, bmaj=9.176 mas, bpa=1.64 degrees ! Estimated noise=6.7881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002947 Jy ! Component: 100 - total flux cleaned = 0.000367933 Jy ! Component: 150 - total flux cleaned = 0.000394252 Jy ! Component: 200 - total flux cleaned = 0.000417286 Jy ! Total flux subtracted in 200 components = 0.000417286 Jy ! Clean residual min=-0.001620 max=0.001607 Jy/beam ! Clean residual mean=0.000036 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0977094 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.0977094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050024Jy sigma=0.060500 ! Fit after self-cal, rms=0.050024Jy sigma=0.060500 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.91365e-05 Jy ! Component: 100 - total flux cleaned = 5.12819e-05 Jy ! Component: 150 - total flux cleaned = 5.80009e-05 Jy ! Component: 200 - total flux cleaned = 6.71101e-05 Jy ! Total flux subtracted in 200 components = 6.71101e-05 Jy ! Clean residual min=-0.001617 max=0.001610 Jy/beam ! Clean residual mean=0.000036 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.0977765 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 70 components and 0.0977765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050024Jy sigma=0.060500 ! Fit after self-cal, rms=0.050024Jy sigma=0.060500 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050024Jy sigma=0.060500 ! Fit after self-cal, rms=0.050024Jy sigma=0.060500 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050024Jy sigma=0.060500 ! Fit after self-cal, rms=0.049901Jy sigma=0.060499 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=4.667 mas, bpa=-10.18 degrees ! Estimated noise=12.9237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415 Jy ! Component: 100 - total flux cleaned = 0.000485541 Jy ! Component: 150 - total flux cleaned = 0.000456639 Jy ! Component: 200 - total flux cleaned = 0.000455328 Jy ! Total flux subtracted in 200 components = 0.000455328 Jy ! Clean residual min=-0.002961 max=0.002595 Jy/beam ! Clean residual mean=0.000009 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0982319 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.0982319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049900Jy sigma=0.060504 ! Fit after self-cal, rms=0.049902Jy sigma=0.060502 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.574 mas, bmaj=5.823 mas, bpa=-9.438 degrees ! Estimated noise=6.25754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000394593 Jy ! Component: 100 - total flux cleaned = -0.000451788 Jy ! Component: 150 - total flux cleaned = -0.000460686 Jy ! Component: 200 - total flux cleaned = -0.000460652 Jy ! Component: 250 - total flux cleaned = -0.000467583 Jy ! Component: 300 - total flux cleaned = -0.000480469 Jy ! Component: 350 - total flux cleaned = -0.000480275 Jy ! Component: 400 - total flux cleaned = -0.00048637 Jy ! Total flux subtracted in 400 components = -0.00048637 Jy ! Clean residual min=-0.001545 max=0.001522 Jy/beam ! Clean residual mean=0.000019 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0977455 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.0977455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049893Jy sigma=0.060496 ! Fit after self-cal, rms=0.049890Jy sigma=0.060495 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.5011e-05 Jy ! Component: 100 - total flux cleaned = -1.9524e-05 Jy ! Component: 150 - total flux cleaned = -1.37646e-05 Jy ! Component: 200 - total flux cleaned = -1.90461e-05 Jy ! Component: 250 - total flux cleaned = -2.414e-05 Jy ! Component: 300 - total flux cleaned = -2.87587e-05 Jy ! Component: 350 - total flux cleaned = -2.86989e-05 Jy ! Component: 400 - total flux cleaned = -3.33298e-05 Jy ! Total flux subtracted in 400 components = -3.33298e-05 Jy ! Clean residual min=-0.001551 max=0.001521 Jy/beam ! Clean residual mean=0.000019 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0977122 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.0977122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049887Jy sigma=0.060494 ! Fit after self-cal, rms=0.049887Jy sigma=0.060494 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049887Jy sigma=0.060494 ! Fit after self-cal, rms=0.049664Jy sigma=0.060492 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.568 mas, bmaj=5.813 mas, bpa=-9.243 degrees ! Estimated noise=6.24052 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.6456e-05 Jy ! Component: 100 - total flux cleaned = -6.89408e-05 Jy ! Component: 150 - total flux cleaned = -5.73044e-05 Jy ! Component: 200 - total flux cleaned = -5.1981e-05 Jy ! Component: 250 - total flux cleaned = -4.70961e-05 Jy ! Component: 300 - total flux cleaned = -4.24653e-05 Jy ! Component: 350 - total flux cleaned = -4.26252e-05 Jy ! Component: 400 - total flux cleaned = -4.25727e-05 Jy ! Total flux subtracted in 400 components = -4.25727e-05 Jy ! Clean residual min=-0.001538 max=0.001514 Jy/beam ! Clean residual mean=0.000019 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0976696 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 0.0976696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049658Jy sigma=0.060491 ! Fit after self-cal, rms=0.049658Jy sigma=0.060491 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.9155e-06 Jy ! Component: 100 - total flux cleaned = -1.72499e-06 Jy ! Component: 150 - total flux cleaned = -1.7619e-06 Jy ! Component: 200 - total flux cleaned = -1.71632e-06 Jy ! Component: 250 - total flux cleaned = -1.49084e-06 Jy ! Component: 300 - total flux cleaned = -1.46484e-06 Jy ! Component: 350 - total flux cleaned = 2.30597e-06 Jy ! Component: 400 - total flux cleaned = 2.16101e-06 Jy ! Total flux subtracted in 400 components = 2.16101e-06 Jy ! Clean residual min=-0.001536 max=0.001508 Jy/beam ! Clean residual mean=0.000019 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0976718 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.0976718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049656Jy sigma=0.060490 ! Fit after self-cal, rms=0.049656Jy sigma=0.060490 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049656Jy sigma=0.060490 ! Fit after self-cal, rms=0.049605Jy sigma=0.060484 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.565 mas, bmaj=5.791 mas, bpa=-8.946 degrees ! Estimated noise=6.23029 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.23874e-05 Jy ! Component: 100 - total flux cleaned = 9.9097e-05 Jy ! Component: 150 - total flux cleaned = 9.95454e-05 Jy ! Component: 200 - total flux cleaned = 8.16335e-05 Jy ! Component: 250 - total flux cleaned = 6.51803e-05 Jy ! Component: 300 - total flux cleaned = 5.00746e-05 Jy ! Component: 350 - total flux cleaned = 4.08081e-05 Jy ! Component: 400 - total flux cleaned = 3.62736e-05 Jy ! Total flux subtracted in 400 components = 3.62736e-05 Jy ! Clean residual min=-0.001551 max=0.001499 Jy/beam ! Clean residual mean=0.000019 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0977081 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.097708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049599Jy sigma=0.060482 ! Fit after self-cal, rms=0.049600Jy sigma=0.060482 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.06095e-06 Jy ! Component: 100 - total flux cleaned = -1.33242e-05 Jy ! Component: 150 - total flux cleaned = -1.71966e-05 Jy ! Component: 200 - total flux cleaned = -1.31532e-05 Jy ! Component: 250 - total flux cleaned = -1.32366e-05 Jy ! Component: 300 - total flux cleaned = -1.32333e-05 Jy ! Component: 350 - total flux cleaned = -1.32766e-05 Jy ! Component: 400 - total flux cleaned = -9.48757e-06 Jy ! Total flux subtracted in 400 components = -9.48757e-06 Jy ! Clean residual min=-0.001547 max=0.001493 Jy/beam ! Clean residual mean=0.000019 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0976986 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 0.0976985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049598Jy sigma=0.060481 ! Fit after self-cal, rms=0.049599Jy sigma=0.060481 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049599Jy sigma=0.060481 ! Fit after self-cal, rms=0.049812Jy sigma=0.059664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.377 mas, bmaj=9.143 mas, bpa=1.877 degrees ! Estimated noise=6.80811 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427866 Jy ! Component: 100 - total flux cleaned = 0.00059782 Jy ! Component: 150 - total flux cleaned = 0.000674624 Jy ! Component: 200 - total flux cleaned = 0.000683283 Jy ! Component: 250 - total flux cleaned = 0.000691449 Jy ! Component: 300 - total flux cleaned = 0.000697243 Jy ! Component: 350 - total flux cleaned = 0.000704713 Jy ! Component: 400 - total flux cleaned = 0.000710077 Jy ! Total flux subtracted in 400 components = 0.000710077 Jy ! Clean residual min=-0.001650 max=0.001584 Jy/beam ! Clean residual mean=0.000036 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0984086 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.0984086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049815Jy sigma=0.059660 ! Fit after self-cal, rms=0.049827Jy sigma=0.059654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.13853e-05 Jy ! Component: 100 - total flux cleaned = 4.15578e-05 Jy ! Component: 150 - total flux cleaned = 4.48622e-05 Jy ! Component: 200 - total flux cleaned = 4.65195e-05 Jy ! Component: 250 - total flux cleaned = 4.65265e-05 Jy ! Component: 300 - total flux cleaned = 4.80855e-05 Jy ! Component: 350 - total flux cleaned = 4.95851e-05 Jy ! Component: 400 - total flux cleaned = 5.10618e-05 Jy ! Total flux subtracted in 400 components = 5.10618e-05 Jy ! Clean residual min=-0.001643 max=0.001579 Jy/beam ! Clean residual mean=0.000037 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0984597 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 116 components and 0.0984597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049828Jy sigma=0.059654 ! Fit after self-cal, rms=0.049828Jy sigma=0.059654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=5.775 mas, bpa=-8.837 degrees ! Estimated noise=6.25168 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 5.775 at -8.837 degrees (North through East) ! Clean map min=-0.001491 max=0.084762 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=4.63 mas, bpa=-9.32 degrees ! Estimated noise=12.8532 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625096 Jy ! Component: 100 - total flux cleaned = 0.0798272 Jy ! Component: 150 - total flux cleaned = 0.0881778 Jy ! Component: 200 - total flux cleaned = 0.0923467 Jy ! Component: 250 - total flux cleaned = 0.0946153 Jy ! Component: 300 - total flux cleaned = 0.0960335 Jy ! Component: 350 - total flux cleaned = 0.0969019 Jy ! Component: 400 - total flux cleaned = 0.09728 Jy ! Total flux subtracted in 400 components = 0.09728 Jy ! Clean residual min=-0.003073 max=0.002614 Jy/beam ! Clean residual mean=0.000011 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0972799 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0972799 Jy ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=5.775 mas, bpa=-8.837 degrees ! Estimated noise=6.25168 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320972 Jy ! Component: 100 - total flux cleaned = 0.000418152 Jy ! Component: 150 - total flux cleaned = 0.000483395 Jy ! Component: 200 - total flux cleaned = 0.000517986 Jy ! Component: 250 - total flux cleaned = 0.000549887 Jy ! Component: 300 - total flux cleaned = 0.000569793 Jy ! Component: 350 - total flux cleaned = 0.000579226 Jy ! Component: 400 - total flux cleaned = 0.000597255 Jy ! Total flux subtracted in 400 components = 0.000597255 Jy ! Clean residual min=-0.001572 max=0.001557 Jy/beam ! Clean residual mean=0.000019 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0978772 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.0978772 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.377 mas, bmaj=9.143 mas, bpa=1.877 degrees ! Estimated noise=6.80811 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305393 Jy ! Component: 100 - total flux cleaned = 0.000329126 Jy ! Component: 150 - total flux cleaned = 0.000344569 Jy ! Component: 200 - total flux cleaned = 0.00036298 Jy ! Component: 250 - total flux cleaned = 0.000375875 Jy ! Component: 300 - total flux cleaned = 0.000387541 Jy ! Component: 350 - total flux cleaned = 0.000398554 Jy ! Component: 400 - total flux cleaned = 0.000405477 Jy ! Total flux subtracted in 400 components = 0.000405477 Jy ! Clean residual min=-0.001649 max=0.001556 Jy/beam ! Clean residual mean=0.000036 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0982826 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55319e-06 Jy ! Component: 100 - total flux cleaned = 1.27694e-05 Jy ! Component: 150 - total flux cleaned = 1.86376e-05 Jy ! Component: 200 - total flux cleaned = 2.42187e-05 Jy ! Component: 250 - total flux cleaned = 2.95238e-05 Jy ! Component: 300 - total flux cleaned = 3.46518e-05 Jy ! Component: 350 - total flux cleaned = 3.70193e-05 Jy ! Component: 400 - total flux cleaned = 4.1763e-05 Jy ! Total flux subtracted in 400 components = 4.1763e-05 Jy ! Clean residual min=-0.001646 max=0.001561 Jy/beam ! Clean residual mean=0.000036 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0983244 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 76 components and 0.0983244 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.563 mas, bmaj=5.775 mas, bpa=-8.837 degrees ! Estimated noise=6.25168 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117702 Jy ! Component: 100 - total flux cleaned = -0.000152453 Jy ! Component: 150 - total flux cleaned = -0.000192507 Jy ! Component: 200 - total flux cleaned = -0.00021099 Jy ! Component: 250 - total flux cleaned = -0.000236127 Jy ! Component: 300 - total flux cleaned = -0.000243874 Jy ! Component: 350 - total flux cleaned = -0.00025172 Jy ! Component: 400 - total flux cleaned = -0.000259049 Jy ! Total flux subtracted in 400 components = -0.000259049 Jy ! Clean residual min=-0.001554 max=0.001544 Jy/beam ! Clean residual mean=0.000019 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.0980654 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.0980654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049828Jy sigma=0.059663 ! Fit after self-cal, rms=0.049825Jy sigma=0.059662 wmodel /scr/pima/rdv95_uvs/J0322+3948_S_map.mod ! Writing 89 model components to file: /scr/pima/rdv95_uvs/J0322+3948_S_map.mod wobs /scr/pima/rdv95_uvs/J0322+3948_S_uvs.fits ! Applying 1400 buffered edits. ! Writing UV FITS file: /scr/pima/rdv95_uvs/J0322+3948_S_uvs.fits wwins /scr/pima/rdv95_uvs/J0322+3948_S_map.win ! wwins: Wrote 1 windows to /scr/pima/rdv95_uvs/J0322+3948_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.67495e-05 Jy ! Component: 100 - total flux cleaned = -0.000154042 Jy ! Component: 150 - total flux cleaned = -0.000106995 Jy ! Component: 200 - total flux cleaned = -1.67223e-05 Jy ! Component: 250 - total flux cleaned = 2.6187e-05 Jy ! Component: 300 - total flux cleaned = 0.000151606 Jy ! Component: 350 - total flux cleaned = 0.000333452 Jy ! Component: 400 - total flux cleaned = 0.000451478 Jy ! Component: 450 - total flux cleaned = 0.000528585 Jy ! Component: 500 - total flux cleaned = 0.000640983 Jy ! Component: 550 - total flux cleaned = 0.000695713 Jy ! Component: 600 - total flux cleaned = 0.000713691 Jy ! Component: 650 - total flux cleaned = 0.000731419 Jy ! Component: 700 - total flux cleaned = 0.000731593 Jy ! Component: 750 - total flux cleaned = 0.000731688 Jy ! Component: 800 - total flux cleaned = 0.000731681 Jy ! Component: 850 - total flux cleaned = 0.000699299 Jy ! Component: 900 - total flux cleaned = 0.000699454 Jy ! Component: 950 - total flux cleaned = 0.000762327 Jy ! Component: 1000 - total flux cleaned = 0.000777352 Jy ! Component: 1050 - total flux cleaned = 0.000776995 Jy ! Component: 1100 - total flux cleaned = 0.000762008 Jy ! Component: 1150 - total flux cleaned = 0.000776948 Jy ! Component: 1200 - total flux cleaned = 0.000703808 Jy ! Component: 1250 - total flux cleaned = 0.000718497 Jy ! Component: 1300 - total flux cleaned = 0.000689948 Jy ! Component: 1350 - total flux cleaned = 0.000717963 Jy ! Component: 1400 - total flux cleaned = 0.000689985 Jy ! Component: 1450 - total flux cleaned = 0.000607523 Jy ! Component: 1500 - total flux cleaned = 0.000621022 Jy ! Component: 1550 - total flux cleaned = 0.000553821 Jy ! Component: 1600 - total flux cleaned = 0.00054047 Jy ! Component: 1650 - total flux cleaned = 0.000527294 Jy ! Component: 1700 - total flux cleaned = 0.000527069 Jy ! Component: 1750 - total flux cleaned = 0.000488226 Jy ! Component: 1800 - total flux cleaned = 0.000437344 Jy ! Component: 1850 - total flux cleaned = 0.000437248 Jy ! Component: 1900 - total flux cleaned = 0.000399842 Jy ! Component: 1950 - total flux cleaned = 0.000399765 Jy ! Component: 2000 - total flux cleaned = 0.000362995 Jy ! Component: 2050 - total flux cleaned = 0.000374962 Jy ! Component: 2100 - total flux cleaned = 0.000326751 Jy ! Component: 2150 - total flux cleaned = 0.000326625 Jy ! Component: 2200 - total flux cleaned = 0.000326647 Jy ! Component: 2250 - total flux cleaned = 0.000314944 Jy ! Component: 2300 - total flux cleaned = 0.000291612 Jy ! Component: 2350 - total flux cleaned = 0.000268774 Jy ! Component: 2400 - total flux cleaned = 0.000303113 Jy ! Component: 2450 - total flux cleaned = 0.000314314 Jy ! Component: 2500 - total flux cleaned = 0.000269165 Jy ! Component: 2550 - total flux cleaned = 0.000269218 Jy ! Component: 2600 - total flux cleaned = 0.000280388 Jy ! Component: 2650 - total flux cleaned = 0.000291385 Jy ! Component: 2700 - total flux cleaned = 0.000334954 Jy ! Component: 2750 - total flux cleaned = 0.0002701 Jy ! Component: 2800 - total flux cleaned = 0.000313119 Jy ! Component: 2850 - total flux cleaned = 0.000259768 Jy ! Component: 2900 - total flux cleaned = 0.000291642 Jy ! Component: 2950 - total flux cleaned = 0.000291415 Jy ! Component: 3000 - total flux cleaned = 0.000291371 Jy ! Component: 3050 - total flux cleaned = 0.000249995 Jy ! Component: 3100 - total flux cleaned = 0.000239786 Jy ! Component: 3150 - total flux cleaned = 0.000239915 Jy ! Component: 3200 - total flux cleaned = 0.000179054 Jy ! Component: 3250 - total flux cleaned = 0.000159001 Jy ! Component: 3300 - total flux cleaned = 0.000148999 Jy ! Component: 3350 - total flux cleaned = 0.000158977 Jy ! Component: 3400 - total flux cleaned = 0.000119436 Jy ! Component: 3450 - total flux cleaned = 0.000119508 Jy ! Component: 3500 - total flux cleaned = 0.000119529 Jy ! Component: 3550 - total flux cleaned = 0.0001098 Jy ! Component: 3600 - total flux cleaned = 8.08334e-05 Jy ! Component: 3650 - total flux cleaned = 7.13051e-05 Jy ! Component: 3700 - total flux cleaned = 6.17874e-05 Jy ! Component: 3750 - total flux cleaned = 3.32893e-05 Jy ! Component: 3800 - total flux cleaned = 7.09067e-05 Jy ! Component: 3850 - total flux cleaned = 1.4632e-05 Jy ! Component: 3900 - total flux cleaned = -1.3347e-05 Jy ! Component: 3950 - total flux cleaned = -2.25346e-05 Jy ! Component: 4000 - total flux cleaned = -2.2513e-05 Jy ! Component: 4050 - total flux cleaned = -2.24695e-05 Jy ! Total flux subtracted in 4096 components = -4.06738e-05 Jy ! Clean residual min=-0.000608 max=0.000456 Jy/beam ! Clean residual mean=0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0980247 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 377 components and 0.0980246 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv95_uvs/J0322+3948_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.563 x 5.775 at -8.837 degrees (North through East) ! Clean map min=-0.001211 max=0.084681 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv95_uvs/J0322+3948_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.0846 rms= 0.00017 Jy quit ! Quitting program ! Log file /scr/pima/rdv95_uvs/J0322+3948_S_uvs.log closed on Wed Nov 6 20:42:27 2013