! Started logfile: /scr/pima/rdv94_uvs/J1230+1223_X_uvs.log on Tue Oct 8 12:18:52 2013 obs /scr/pima/rdv94_uvs/J1230+1223_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1230+1223_X_uva.fits ! AN table 1: 4 integrations on 66 of 66 possible baselines. ! AN table 2: 2 integrations on 3 of 3 possible baselines. ! AN table 3: 3 integrations on 45 of 45 possible baselines. ! AN table 4: 2 integrations on 3 of 3 possible baselines. ! AN table 5: 3 integrations on 15 of 15 possible baselines. ! AN table 6: 3 integrations on 1 of 1 possible baselines. ! AN table 7: 3 integrations on 3 of 3 possible baselines. ! AN table 8: 3 integrations on 1 of 1 possible baselines. ! AN table 9: 63 integrations on 6 of 6 possible baselines. ! AN table 10: 24 integrations on 10 of 10 possible baselines. ! AN table 11: 4 integrations on 3 of 3 possible baselines. ! AN table 12: 2 integrations on 1 of 1 possible baselines. ! AN table 13: 12 integrations on 21 of 21 possible baselines. ! AN table 14: 12 integrations on 15 of 15 possible baselines. ! AN table 15: 12 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.579118 visibilities/baseline/integration-bin. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5724 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv94_uvs/J1230+1223_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:ON self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:WF self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:WF self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:WF self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:MK self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:ON self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:ON self-cal status=correctable weight=1 ! 9:HH self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:ON self-cal status=correctable weight=1 ! 9:WZ self-cal status=correctable weight=1 ! 10:HH self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:ON self-cal status=correctable weight=1 ! 10:WF self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 ! 11:HN self-cal status=correctable weight=1 ! 11:NY self-cal status=correctable weight=1 ! 11:WF self-cal status=correctable weight=1 ! 12:HN self-cal status=correctable weight=1 ! 12:WF self-cal status=correctable weight=1 ! 13:HH self-cal status=correctable weight=1 ! 13:HN self-cal status=correctable weight=1 ! 13:NL self-cal status=correctable weight=1 ! 13:NY self-cal status=correctable weight=1 ! 13:ON self-cal status=correctable weight=1 ! 13:WF self-cal status=correctable weight=1 ! 13:WZ self-cal status=correctable weight=1 ! 14:HH self-cal status=correctable weight=1 ! 14:HN self-cal status=correctable weight=1 ! 14:NY self-cal status=correctable weight=1 ! 14:ON self-cal status=correctable weight=1 ! 14:WF self-cal status=correctable weight=1 ! 14:WZ self-cal status=correctable weight=1 ! 15:BR self-cal status=correctable weight=1 ! 15:FD self-cal status=correctable weight=1 ! 15:HH self-cal status=correctable weight=1 ! 15:HN self-cal status=correctable weight=1 ! 15:KP self-cal status=correctable weight=1 ! 15:LA self-cal status=correctable weight=1 ! 15:NL self-cal status=correctable weight=1 ! 15:NY self-cal status=correctable weight=1 ! 15:ON self-cal status=correctable weight=1 ! 15:OV self-cal status=correctable weight=1 ! 15:PT self-cal status=correctable weight=1 ! 15:WF self-cal status=correctable weight=1 ! 15:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 122 telescope corrections were flagged in sub-array 9. ! A total of 26 telescope corrections were flagged in sub-array 10. ! A total of 3 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 43 telescope corrections were flagged in sub-array 13. ! A total of 35 telescope corrections were flagged in sub-array 14. ! A total of 73 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 122 telescope corrections were flagged in sub-array 9. ! A total of 26 telescope corrections were flagged in sub-array 10. ! A total of 3 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 43 telescope corrections were flagged in sub-array 13. ! A total of 35 telescope corrections were flagged in sub-array 14. ! A total of 73 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 168 telescope corrections were flagged in sub-array 9. ! A total of 40 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 50 telescope corrections were flagged in sub-array 13. ! A total of 42 telescope corrections were flagged in sub-array 14. ! A total of 80 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 168 telescope corrections were flagged in sub-array 9. ! A total of 40 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 50 telescope corrections were flagged in sub-array 13. ! A total of 42 telescope corrections were flagged in sub-array 14. ! A total of 80 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=1.618801Jy sigma=36.567620 ! Fit after self-cal, rms=0.790619Jy sigma=19.019762 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:ON ! Flagging baselines of antenna 1:ON in the currently selected channels. flag 1:WF ! Flagging baselines of antenna 1:WF in the currently selected channels. flag 2:WF ! Flagging baselines of antenna 2:WF in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WF ! Flagging baselines of antenna 3:WF in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:ON ! Flagging baselines of antenna 7:ON in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 8:NY ! Flagging baselines of antenna 8:NY in the currently selected channels. flag 8:ON ! Flagging baselines of antenna 8:ON in the currently selected channels. flag 9:HH ! Flagging baselines of antenna 9:HH in the currently selected channels. flag 9:NY ! Flagging baselines of antenna 9:NY in the currently selected channels. flag 9:ON ! Flagging baselines of antenna 9:ON in the currently selected channels. flag 9:WZ ! Flagging baselines of antenna 9:WZ in the currently selected channels. flag 10:HH ! Flagging baselines of antenna 10:HH in the currently selected channels. flag 10:NY ! Flagging baselines of antenna 10:NY in the currently selected channels. flag 10:ON ! Flagging baselines of antenna 10:ON in the currently selected channels. flag 10:WF ! Flagging baselines of antenna 10:WF in the currently selected channels. flag 10:WZ ! Flagging baselines of antenna 10:WZ in the currently selected channels. flag 11:NY ! Flagging baselines of antenna 11:NY in the currently selected channels. flag 11:WF ! Flagging baselines of antenna 11:WF in the currently selected channels. flag 12:WF ! Flagging baselines of antenna 12:WF in the currently selected channels. flag 13:HH ! Flagging baselines of antenna 13:HH in the currently selected channels. flag 13:NY ! Flagging baselines of antenna 13:NY in the currently selected channels. flag 13:ON ! Flagging baselines of antenna 13:ON in the currently selected channels. flag 13:WF ! Flagging baselines of antenna 13:WF in the currently selected channels. flag 13:WZ ! Flagging baselines of antenna 13:WZ in the currently selected channels. flag 14:HH ! Flagging baselines of antenna 14:HH in the currently selected channels. flag 14:NY ! Flagging baselines of antenna 14:NY in the currently selected channels. flag 14:ON ! Flagging baselines of antenna 14:ON in the currently selected channels. flag 14:WF ! Flagging baselines of antenna 14:WF in the currently selected channels. flag 14:WZ ! Flagging baselines of antenna 14:WZ in the currently selected channels. flag 15:HH ! Flagging baselines of antenna 15:HH in the currently selected channels. flag 15:NY ! Flagging baselines of antenna 15:NY in the currently selected channels. flag 15:ON ! Flagging baselines of antenna 15:ON in the currently selected channels. flag 15:WF ! Flagging baselines of antenna 15:WF in the currently selected channels. flag 15:WZ ! Flagging baselines of antenna 15:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.246 mas, bmaj=2.639 mas, bpa=-20.62 degrees ! Estimated noise=1.08895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23554 Jy ! Component: 100 - total flux cleaned = 1.66864 Jy ! Total flux subtracted in 100 components = 1.66864 Jy ! Clean residual min=-0.100057 max=0.211010 Jy/beam ! Clean residual mean=0.000187 rms=0.029645 Jy/beam ! Combined flux in latest and established models = 1.66864 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.66864 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 130 telescope corrections were flagged in sub-array 9. ! A total of 94 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 41 telescope corrections were flagged in sub-array 13. ! A total of 37 telescope corrections were flagged in sub-array 14. ! A total of 42 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 130 telescope corrections were flagged in sub-array 9. ! A total of 94 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! A total of 41 telescope corrections were flagged in sub-array 13. ! A total of 37 telescope corrections were flagged in sub-array 14. ! A total of 42 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 84 telescope corrections were flagged in sub-array 9. ! A total of 80 telescope corrections were flagged in sub-array 10. ! A total of 34 telescope corrections were flagged in sub-array 13. ! A total of 30 telescope corrections were flagged in sub-array 14. ! A total of 35 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 84 telescope corrections were flagged in sub-array 9. ! A total of 80 telescope corrections were flagged in sub-array 10. ! A total of 34 telescope corrections were flagged in sub-array 13. ! A total of 30 telescope corrections were flagged in sub-array 14. ! A total of 35 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.513825Jy sigma=17.081209 ! Fit after self-cal, rms=0.517353Jy sigma=17.177389 ! Inverting map and beam ! Estimated beam: bmin=1.251 mas, bmaj=2.656 mas, bpa=-21.1 degrees ! Estimated noise=1.08316 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224934 Jy ! Component: 100 - total flux cleaned = 0.358714 Jy ! Total flux subtracted in 100 components = 0.358714 Jy ! Clean residual min=-0.078328 max=0.161347 Jy/beam ! Clean residual mean=0.000084 rms=0.020509 Jy/beam ! Combined flux in latest and established models = 2.02735 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 2.02735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388601Jy sigma=12.371502 ! Fit after self-cal, rms=0.390174Jy sigma=12.352477 ! Inverting map ! Added new window around map position (-2.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143011 Jy ! Component: 100 - total flux cleaned = 0.225022 Jy ! Total flux subtracted in 100 components = 0.225022 Jy ! Clean residual min=-0.064028 max=0.068327 Jy/beam ! Clean residual mean=0.000021 rms=0.015768 Jy/beam ! Combined flux in latest and established models = 2.25238 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 2.25238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324010Jy sigma=9.926180 ! Fit after self-cal, rms=0.318748Jy sigma=9.826229 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.612 mas, bmaj=3.123 mas, bpa=-20.64 degrees ! Estimated noise=0.764045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120521 Jy ! Component: 100 - total flux cleaned = 0.191017 Jy ! Component: 150 - total flux cleaned = 0.237501 Jy ! Component: 200 - total flux cleaned = 0.269061 Jy ! Total flux subtracted in 200 components = 0.269061 Jy ! Clean residual min=-0.072102 max=0.076010 Jy/beam ! Clean residual mean=-0.000074 rms=0.022908 Jy/beam ! Combined flux in latest and established models = 2.52144 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 109 components and 2.52144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289886Jy sigma=8.281940 ! Fit after self-cal, rms=0.287406Jy sigma=8.206437 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.94 KP 0.99 ! LA 1.07 MK 1.10 NL 1.00 NY 1.00* ! ON 1.00* OV 1.01 PT 1.02 WF 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.93 HN 0.95 KP 0.97 ! LA 1.06 MK 1.09 NL 1.02 NY 1.00* ! OV 0.98 WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.03 KP 1.21 LA 1.25 ! MK 0.97 OV 1.02 ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HH 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HH 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HH 0.00* HN 0.00* NL 0.00* NY 0.00* ! ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HH 0.00* HN 0.00* NY 0.00* ON 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! BR 1.05 FD 0.86 HH 1.00* HN 0.94 ! KP 0.93 LA 1.05 NL 1.05 NY 1.00* ! ON 1.00* OV 0.94 PT 1.07 WF 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.95 HN 0.94 KP 0.94 ! LA 1.05 MK 1.11 NL 1.03 NY 1.00* ! ON 1.00* OV 1.00 PT 1.01 WF 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.21 FD 0.94 HN 0.98 KP 0.94 ! LA 1.03 MK 1.11 NL 1.00 NY 1.00* ! OV 0.98 WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.17 FD 1.08 KP 1.16 LA 1.25 ! MK 0.99 OV 0.99 ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HH 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HH 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HH 0.00* HN 0.00* NL 0.00* NY 0.00* ! ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HH 0.00* HN 0.00* NY 0.00* ON 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! BR 1.39 FD 0.87 HH 1.00* HN 0.96 ! KP 0.88 LA 1.01 NL 1.07 NY 1.00* ! ON 1.00* OV 0.91 PT 1.08 WF 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 0.97 KP 0.85 ! LA 1.10 MK 1.07 NL 1.04 NY 1.00* ! ON 1.00* OV 1.06 PT 1.02 WF 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.93 HN 1.01 KP 0.85 ! LA 1.08 MK 1.07 NL 1.02 NY 1.00* ! OV 1.03 WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.05 FD 1.03 KP 1.07 LA 1.29 ! MK 1.03 OV 1.07 ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HH 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HH 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HH 0.00* HN 0.00* NL 0.00* NY 0.00* ! ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HH 0.00* HN 0.00* NY 0.00* ON 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! BR 1.11 FD 0.87 HH 1.00* HN 0.99 ! KP 0.82 LA 1.08 NL 1.09 NY 1.00* ! ON 1.00* OV 0.96 PT 1.10 WF 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.96 KP 0.89 ! LA 1.10 MK 1.15 NL 1.06 NY 1.00* ! ON 1.00* OV 1.02 PT 1.06 WF 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.00 HN 0.98 KP 0.89 ! LA 1.07 MK 1.16 NL 1.04 NY 1.00* ! OV 0.98 WF 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.13 KP 1.13 LA 1.31 ! MK 1.03 OV 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! MK 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! NY 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! HH 0.00* NY 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HH 0.00* NY 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! HN 0.00* NY 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 12: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 13: ! HH 0.00* HN 0.00* NL 0.00* NY 0.00* ! ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 14: ! HH 0.00* HN 0.00* NY 0.00* ON 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 15: ! BR 1.07 FD 0.93 HH 1.00* HN 0.99 ! KP 0.85 LA 1.07 NL 1.12 NY 1.00* ! ON 1.00* OV 0.95 PT 1.13 WF 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.287406Jy sigma=8.206437 ! Fit after self-cal, rms=0.173187Jy sigma=4.541366 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.642 mas, bmaj=3.263 mas, bpa=-19.52 degrees ! Estimated noise=0.770602 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00832423 Jy ! Component: 100 - total flux cleaned = -0.0115718 Jy ! Component: 150 - total flux cleaned = -0.0130452 Jy ! Component: 200 - total flux cleaned = -0.0136741 Jy ! Total flux subtracted in 200 components = -0.0136741 Jy ! Clean residual min=-0.033033 max=0.057167 Jy/beam ! Clean residual mean=-0.000100 rms=0.012060 Jy/beam ! Combined flux in latest and established models = 2.50776 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 2.50776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170943Jy sigma=4.489353 ! Fit after self-cal, rms=0.171348Jy sigma=4.482218 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171348Jy sigma=4.482218 ! Fit after self-cal, rms=0.170678Jy sigma=4.474234 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.641 mas, bmaj=3.27 mas, bpa=-19.46 degrees ! Estimated noise=0.76915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00923082 Jy ! Component: 100 - total flux cleaned = -0.0117514 Jy ! Component: 150 - total flux cleaned = -0.0129591 Jy ! Component: 200 - total flux cleaned = -0.0137697 Jy ! Total flux subtracted in 200 components = -0.0137697 Jy ! Clean residual min=-0.031971 max=0.056318 Jy/beam ! Clean residual mean=-0.000100 rms=0.011903 Jy/beam ! Combined flux in latest and established models = 2.49399 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 2.49399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169184Jy sigma=4.441479 ! Fit after self-cal, rms=0.169313Jy sigma=4.438764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584839 Jy ! Component: 100 - total flux cleaned = 0.0910443 Jy ! Component: 150 - total flux cleaned = 0.111744 Jy ! Component: 200 - total flux cleaned = 0.123479 Jy ! Total flux subtracted in 200 components = 0.123479 Jy ! Clean residual min=-0.026713 max=0.039448 Jy/beam ! Clean residual mean=-0.000091 rms=0.008568 Jy/beam ! Combined flux in latest and established models = 2.61747 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 186 components and 2.61747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150849Jy sigma=3.762305 ! Fit after self-cal, rms=0.150222Jy sigma=3.717008 ! Inverting map ! Added new window around map position (-19.6, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344695 Jy ! Component: 100 - total flux cleaned = 0.043586 Jy ! Component: 150 - total flux cleaned = 0.0475748 Jy ! Component: 200 - total flux cleaned = 0.0515427 Jy ! Total flux subtracted in 200 components = 0.0515427 Jy ! Clean residual min=-0.020733 max=0.030966 Jy/beam ! Clean residual mean=-0.000075 rms=0.006593 Jy/beam ! Combined flux in latest and established models = 2.66901 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 224 components and 2.66901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142029Jy sigma=3.354334 ! Fit after self-cal, rms=0.141307Jy sigma=3.328305 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141307Jy sigma=3.328305 ! Fit after self-cal, rms=0.139284Jy sigma=3.221345 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.644 mas, bmaj=3.281 mas, bpa=-19.5 degrees ! Estimated noise=0.768084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192068 Jy ! Component: 100 - total flux cleaned = 0.0284865 Jy ! Component: 150 - total flux cleaned = 0.0329814 Jy ! Component: 200 - total flux cleaned = 0.0364772 Jy ! Total flux subtracted in 200 components = 0.0364772 Jy ! Clean residual min=-0.017061 max=0.022817 Jy/beam ! Clean residual mean=-0.000053 rms=0.005522 Jy/beam ! Combined flux in latest and established models = 2.70549 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 258 components and 2.70549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136077Jy sigma=3.099082 ! Fit after self-cal, rms=0.135933Jy sigma=3.092291 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403402 Jy ! Component: 100 - total flux cleaned = 0.00604764 Jy ! Component: 150 - total flux cleaned = 0.00697854 Jy ! Component: 200 - total flux cleaned = 0.00810766 Jy ! Total flux subtracted in 200 components = 0.00810766 Jy ! Clean residual min=-0.016468 max=0.021540 Jy/beam ! Clean residual mean=-0.000048 rms=0.005243 Jy/beam ! Combined flux in latest and established models = 2.7136 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 268 components and 2.7136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134774Jy sigma=3.046626 ! Fit after self-cal, rms=0.134686Jy sigma=3.044680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134686Jy sigma=3.044680 ! Fit after self-cal, rms=0.134406Jy sigma=3.033764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=3.786 mas, bpa=-27.71 degrees ! Estimated noise=0.737657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233816 Jy ! Component: 100 - total flux cleaned = 0.000907823 Jy ! Component: 150 - total flux cleaned = 0.000612458 Jy ! Component: 200 - total flux cleaned = 8.56758e-05 Jy ! Total flux subtracted in 200 components = 8.56758e-05 Jy ! Clean residual min=-0.018514 max=0.023941 Jy/beam ! Clean residual mean=-0.000060 rms=0.006318 Jy/beam ! Combined flux in latest and established models = 2.71368 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 285 components and 2.71369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134110Jy sigma=2.993086 ! Fit after self-cal, rms=0.134084Jy sigma=2.991399 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107765 Jy ! Component: 100 - total flux cleaned = -0.000850804 Jy ! Component: 150 - total flux cleaned = -0.0012787 Jy ! Component: 200 - total flux cleaned = -0.000877096 Jy ! Total flux subtracted in 200 components = -0.000877096 Jy ! Clean residual min=-0.018294 max=0.023597 Jy/beam ! Clean residual mean=-0.000057 rms=0.006138 Jy/beam ! Combined flux in latest and established models = 2.71281 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 300 components and 2.71281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134084Jy sigma=2.971969 ! Fit after self-cal, rms=0.134024Jy sigma=2.971437 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 3:BR,true ! 3:BR self-cal status=fixed weight=1 selfant 3:FD,true ! 3:FD self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:KP,true ! 3:KP self-cal status=fixed weight=1 selfant 3:LA,true ! 3:LA self-cal status=fixed weight=1 selfant 3:MK,true ! 3:MK self-cal status=fixed weight=1 selfant 3:NL,true ! 3:NL self-cal status=fixed weight=1 selfant 3:OV,true ! 3:OV self-cal status=fixed weight=1 selfant 4:BR,true ! 4:BR self-cal status=fixed weight=1 selfant 4:FD,true ! 4:FD self-cal status=fixed weight=1 selfant 4:MK,true ! 4:MK self-cal status=fixed weight=1 selfant 5:BR,true ! 5:BR self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:KP,true ! 5:KP self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:MK,true ! 5:MK self-cal status=fixed weight=1 selfant 5:OV,true ! 5:OV self-cal status=fixed weight=1 selfant 6:MK,true ! 6:MK self-cal status=fixed weight=1 selfant 11:HN,true ! 11:HN self-cal status=fixed weight=1 selfant 12:HN,true ! 12:HN self-cal status=fixed weight=1 selfant 13:HN,true ! 13:HN self-cal status=fixed weight=1 selfant 13:NL,true ! 13:NL self-cal status=fixed weight=1 selfant 14:HN,true ! 14:HN self-cal status=fixed weight=1 selfant 15:BR,true ! 15:BR self-cal status=fixed weight=1 selfant 15:FD,true ! 15:FD self-cal status=fixed weight=1 selfant 15:HN,true ! 15:HN self-cal status=fixed weight=1 selfant 15:KP,true ! 15:KP self-cal status=fixed weight=1 selfant 15:LA,true ! 15:LA self-cal status=fixed weight=1 selfant 15:NL,true ! 15:NL self-cal status=fixed weight=1 selfant 15:OV,true ! 15:OV self-cal status=fixed weight=1 selfant 15:PT,true ! 15:PT self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 140 telescope corrections were flagged in sub-array 9. ! A total of 53 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 27 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! A total of 27 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 140 telescope corrections were flagged in sub-array 9. ! A total of 53 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 27 telescope corrections were flagged in sub-array 13. ! A total of 27 telescope corrections were flagged in sub-array 14. ! A total of 27 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 252 telescope corrections were flagged in sub-array 9. ! A total of 76 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 40 telescope corrections were flagged in sub-array 13. ! A total of 40 telescope corrections were flagged in sub-array 14. ! A total of 37 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 252 telescope corrections were flagged in sub-array 9. ! A total of 76 telescope corrections were flagged in sub-array 10. ! A total of 8 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 40 telescope corrections were flagged in sub-array 13. ! A total of 40 telescope corrections were flagged in sub-array 14. ! A total of 37 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.468152Jy sigma=6.934259 ! Fit after self-cal, rms=0.335108Jy sigma=2.524479 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:ON self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:WF self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:WF self-cal status=correctable weight=1 ! 3:BR self-cal status=correctable weight=1 ! 3:FD self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:KP self-cal status=correctable weight=1 ! 3:LA self-cal status=correctable weight=1 ! 3:MK self-cal status=correctable weight=1 ! 3:NL self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:OV self-cal status=correctable weight=1 ! 3:WF self-cal status=correctable weight=1 ! 4:BR self-cal status=correctable weight=1 ! 4:FD self-cal status=correctable weight=1 ! 4:MK self-cal status=correctable weight=1 ! 5:BR self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:KP self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:MK self-cal status=correctable weight=1 ! 5:OV self-cal status=correctable weight=1 ! 6:MK self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:ON self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:ON self-cal status=correctable weight=1 ! 9:HH self-cal status=correctable weight=1 ! 9:NY self-cal status=correctable weight=1 ! 9:ON self-cal status=correctable weight=1 ! 9:WZ self-cal status=correctable weight=1 ! 10:HH self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:ON self-cal status=correctable weight=1 ! 10:WF self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 ! 11:HN self-cal status=correctable weight=1 ! 11:NY self-cal status=correctable weight=1 ! 11:WF self-cal status=correctable weight=1 ! 12:HN self-cal status=correctable weight=1 ! 12:WF self-cal status=correctable weight=1 ! 13:HH self-cal status=correctable weight=1 ! 13:HN self-cal status=correctable weight=1 ! 13:NL self-cal status=correctable weight=1 ! 13:NY self-cal status=correctable weight=1 ! 13:ON self-cal status=correctable weight=1 ! 13:WF self-cal status=correctable weight=1 ! 13:WZ self-cal status=correctable weight=1 ! 14:HH self-cal status=correctable weight=1 ! 14:HN self-cal status=correctable weight=1 ! 14:NY self-cal status=correctable weight=1 ! 14:ON self-cal status=correctable weight=1 ! 14:WF self-cal status=correctable weight=1 ! 14:WZ self-cal status=correctable weight=1 ! 15:BR self-cal status=correctable weight=1 ! 15:FD self-cal status=correctable weight=1 ! 15:HH self-cal status=correctable weight=1 ! 15:HN self-cal status=correctable weight=1 ! 15:KP self-cal status=correctable weight=1 ! 15:LA self-cal status=correctable weight=1 ! 15:NL self-cal status=correctable weight=1 ! 15:NY self-cal status=correctable weight=1 ! 15:ON self-cal status=correctable weight=1 ! 15:OV self-cal status=correctable weight=1 ! 15:PT self-cal status=correctable weight=1 ! 15:WF self-cal status=correctable weight=1 ! 15:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 14. ! A total of 55 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 14. ! A total of 55 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 14. ! A total of 55 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 11. ! A total of 2 telescope corrections were flagged in sub-array 12. ! A total of 16 telescope corrections were flagged in sub-array 13. ! A total of 8 telescope corrections were flagged in sub-array 14. ! A total of 55 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.335108Jy sigma=2.524479 ! Fit after self-cal, rms=0.332054Jy sigma=2.378112 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=0.8777 mas, bmaj=1.647 mas, bpa=-16.69 degrees ! Estimated noise=1.30327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804798 Jy ! Component: 100 - total flux cleaned = 0.00810653 Jy ! Component: 150 - total flux cleaned = 0.00712118 Jy ! Component: 200 - total flux cleaned = 0.00534742 Jy ! Total flux subtracted in 200 components = 0.00534742 Jy ! Clean residual min=-0.019591 max=0.022065 Jy/beam ! Clean residual mean=0.000045 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 2.71816 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 312 components and 2.71816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317314Jy sigma=2.345971 ! Fit after self-cal, rms=0.313243Jy sigma=2.277329 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-6.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107155 Jy ! Component: 100 - total flux cleaned = 0.0132482 Jy ! Component: 150 - total flux cleaned = 0.0140258 Jy ! Component: 200 - total flux cleaned = 0.0154721 Jy ! Total flux subtracted in 200 components = 0.0154721 Jy ! Clean residual min=-0.016713 max=0.018405 Jy/beam ! Clean residual mean=-0.000031 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 2.73363 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 324 components and 2.73363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305492Jy sigma=2.242373 ! Fit after self-cal, rms=0.305789Jy sigma=2.238695 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-5.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690636 Jy ! Component: 100 - total flux cleaned = 0.00689603 Jy ! Component: 150 - total flux cleaned = 0.00688175 Jy ! Component: 200 - total flux cleaned = 0.00624878 Jy ! Total flux subtracted in 200 components = 0.00624878 Jy ! Clean residual min=-0.015572 max=0.016793 Jy/beam ! Clean residual mean=-0.000062 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 2.73988 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 334 components and 2.73988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299892Jy sigma=2.208960 ! Fit after self-cal, rms=0.300056Jy sigma=2.206686 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (1.8, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566505 Jy ! Component: 100 - total flux cleaned = 0.00567064 Jy ! Component: 150 - total flux cleaned = 0.00508845 Jy ! Component: 200 - total flux cleaned = 0.00566046 Jy ! Total flux subtracted in 200 components = 0.00566046 Jy ! Clean residual min=-0.014979 max=0.015197 Jy/beam ! Clean residual mean=-0.000091 rms=0.003388 Jy/beam ! Combined flux in latest and established models = 2.74554 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 343 components and 2.74554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294280Jy sigma=2.189810 ! Fit after self-cal, rms=0.294411Jy sigma=2.187798 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-8, 36.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715856 Jy ! Component: 100 - total flux cleaned = 0.0082761 Jy ! Component: 150 - total flux cleaned = 0.00935113 Jy ! Component: 200 - total flux cleaned = 0.00986901 Jy ! Total flux subtracted in 200 components = 0.00986901 Jy ! Clean residual min=-0.014949 max=0.013795 Jy/beam ! Clean residual mean=-0.000106 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 2.75541 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 350 components and 2.75541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289751Jy sigma=2.167236 ! Fit after self-cal, rms=0.290024Jy sigma=2.165488 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.076 mas, bmaj=1.975 mas, bpa=-15.98 degrees ! Estimated noise=0.850311 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016888 Jy ! Component: 100 - total flux cleaned = -0.000433729 Jy ! Component: 150 - total flux cleaned = -0.000824515 Jy ! Component: 200 - total flux cleaned = -0.00119845 Jy ! Component: 250 - total flux cleaned = -0.00154264 Jy ! Component: 300 - total flux cleaned = -0.0012187 Jy ! Component: 350 - total flux cleaned = -0.00154356 Jy ! Component: 400 - total flux cleaned = -0.00154359 Jy ! Total flux subtracted in 400 components = -0.00154359 Jy ! Clean residual min=-0.014705 max=0.013499 Jy/beam ! Clean residual mean=-0.000263 rms=0.003480 Jy/beam ! Combined flux in latest and established models = 2.75386 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 371 components and 2.75386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286223Jy sigma=2.129321 ! Fit after self-cal, rms=0.285715Jy sigma=2.126343 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293306 Jy ! Component: 100 - total flux cleaned = 0.00293367 Jy ! Component: 150 - total flux cleaned = 0.00293719 Jy ! Component: 200 - total flux cleaned = 0.00323286 Jy ! Component: 250 - total flux cleaned = 0.00322523 Jy ! Component: 300 - total flux cleaned = 0.00322147 Jy ! Component: 350 - total flux cleaned = 0.00321243 Jy ! Component: 400 - total flux cleaned = 0.00321609 Jy ! Total flux subtracted in 400 components = 0.00321609 Jy ! Clean residual min=-0.014382 max=0.013020 Jy/beam ! Clean residual mean=-0.000311 rms=0.003397 Jy/beam ! Combined flux in latest and established models = 2.75708 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 386 components and 2.75708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282409Jy sigma=2.110303 ! Fit after self-cal, rms=0.282154Jy sigma=2.109129 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 140 telescope corrections were flagged in sub-array 9. ! A total of 53 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 43 telescope corrections were flagged in sub-array 13. ! A total of 35 telescope corrections were flagged in sub-array 14. ! A total of 82 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 140 telescope corrections were flagged in sub-array 9. ! A total of 53 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 43 telescope corrections were flagged in sub-array 13. ! A total of 35 telescope corrections were flagged in sub-array 14. ! A total of 82 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 252 telescope corrections were flagged in sub-array 9. ! A total of 76 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 56 telescope corrections were flagged in sub-array 13. ! A total of 48 telescope corrections were flagged in sub-array 14. ! A total of 92 telescope corrections were flagged in sub-array 15. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 1 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 7. ! A total of 6 telescope corrections were flagged in sub-array 8. ! A total of 252 telescope corrections were flagged in sub-array 9. ! A total of 76 telescope corrections were flagged in sub-array 10. ! A total of 12 telescope corrections were flagged in sub-array 11. ! A total of 4 telescope corrections were flagged in sub-array 12. ! A total of 56 telescope corrections were flagged in sub-array 13. ! A total of 48 telescope corrections were flagged in sub-array 14. ! A total of 92 telescope corrections were flagged in sub-array 15. ! ! Fit before self-cal, rms=0.426740Jy sigma=6.188258 ! Fit after self-cal, rms=0.274070Jy sigma=2.086472 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.067 mas, bmaj=1.98 mas, bpa=-15.76 degrees ! Estimated noise=0.846551 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045516 Jy ! Component: 100 - total flux cleaned = 0.00598575 Jy ! Component: 150 - total flux cleaned = 0.00662569 Jy ! Component: 200 - total flux cleaned = 0.00693006 Jy ! Component: 250 - total flux cleaned = 0.00782196 Jy ! Component: 300 - total flux cleaned = 0.00838646 Jy ! Component: 350 - total flux cleaned = 0.00920587 Jy ! Component: 400 - total flux cleaned = 0.00947743 Jy ! Total flux subtracted in 400 components = 0.00947743 Jy ! Clean residual min=-0.012622 max=0.012453 Jy/beam ! Clean residual mean=0.000000 rms=0.003139 Jy/beam ! Combined flux in latest and established models = 2.76656 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 404 components and 2.76656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270928Jy sigma=2.062288 ! Fit after self-cal, rms=0.270390Jy sigma=2.060206 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246047 Jy ! Component: 100 - total flux cleaned = 0.00300223 Jy ! Component: 150 - total flux cleaned = 0.00300536 Jy ! Component: 200 - total flux cleaned = 0.00352072 Jy ! Component: 250 - total flux cleaned = 0.00401464 Jy ! Component: 300 - total flux cleaned = 0.00426172 Jy ! Component: 350 - total flux cleaned = 0.00474102 Jy ! Component: 400 - total flux cleaned = 0.00519982 Jy ! Total flux subtracted in 400 components = 0.00519982 Jy ! Clean residual min=-0.012597 max=0.012040 Jy/beam ! Clean residual mean=-0.000093 rms=0.003070 Jy/beam ! Combined flux in latest and established models = 2.77176 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 411 components and 2.77176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267817Jy sigma=2.048403 ! Fit after self-cal, rms=0.267522Jy sigma=2.047588 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267522Jy sigma=2.047588 ! Fit after self-cal, rms=0.269358Jy sigma=2.013357 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.064 mas, bmaj=1.983 mas, bpa=-15.74 degrees ! Estimated noise=0.845483 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424533 Jy ! Component: 100 - total flux cleaned = 0.00479255 Jy ! Component: 150 - total flux cleaned = 0.00529275 Jy ! Component: 200 - total flux cleaned = 0.00577075 Jy ! Component: 250 - total flux cleaned = 0.00600337 Jy ! Component: 300 - total flux cleaned = 0.00646152 Jy ! Component: 350 - total flux cleaned = 0.00668171 Jy ! Component: 400 - total flux cleaned = 0.00690206 Jy ! Total flux subtracted in 400 components = 0.00690206 Jy ! Clean residual min=-0.009847 max=0.012180 Jy/beam ! Clean residual mean=0.000027 rms=0.002755 Jy/beam ! Combined flux in latest and established models = 2.77866 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 428 components and 2.77866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266878Jy sigma=1.998194 ! Fit after self-cal, rms=0.266749Jy sigma=1.997545 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.6, 28.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100795 Jy ! Component: 100 - total flux cleaned = 0.0113221 Jy ! Component: 150 - total flux cleaned = 0.0124737 Jy ! Component: 200 - total flux cleaned = 0.0126894 Jy ! Component: 250 - total flux cleaned = 0.0131137 Jy ! Component: 300 - total flux cleaned = 0.0131131 Jy ! Component: 350 - total flux cleaned = 0.0131111 Jy ! Component: 400 - total flux cleaned = 0.0135117 Jy ! Total flux subtracted in 400 components = 0.0135117 Jy ! Clean residual min=-0.010365 max=0.009809 Jy/beam ! Clean residual mean=-0.000142 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 2.79217 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 460 components and 2.79217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264831Jy sigma=1.974945 ! Fit after self-cal, rms=0.264611Jy sigma=1.973327 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-29.2, 22.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738132 Jy ! Component: 100 - total flux cleaned = 0.00821592 Jy ! Component: 150 - total flux cleaned = 0.00822807 Jy ! Component: 200 - total flux cleaned = 0.00780176 Jy ! Component: 250 - total flux cleaned = 0.00760201 Jy ! Component: 300 - total flux cleaned = 0.00740643 Jy ! Component: 350 - total flux cleaned = 0.00720896 Jy ! Component: 400 - total flux cleaned = 0.00721386 Jy ! Total flux subtracted in 400 components = 0.00721386 Jy ! Clean residual min=-0.009571 max=0.009119 Jy/beam ! Clean residual mean=-0.000164 rms=0.002324 Jy/beam ! Combined flux in latest and established models = 2.79938 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 486 components and 2.79938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262879Jy sigma=1.952517 ! Fit after self-cal, rms=0.262528Jy sigma=1.950793 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262528Jy sigma=1.950793 ! Fit after self-cal, rms=0.261439Jy sigma=1.812619 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=2.656 mas, bmaj=3.671 mas, bpa=-25.68 degrees ! Estimated noise=0.697066 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743356 Jy ! Component: 100 - total flux cleaned = 0.00999686 Jy ! Component: 150 - total flux cleaned = 0.0108772 Jy ! Component: 200 - total flux cleaned = 0.0111974 Jy ! Component: 250 - total flux cleaned = 0.0113457 Jy ! Component: 300 - total flux cleaned = 0.0113446 Jy ! Component: 350 - total flux cleaned = 0.0112155 Jy ! Component: 400 - total flux cleaned = 0.0113443 Jy ! Total flux subtracted in 400 components = 0.0113443 Jy ! Clean residual min=-0.008720 max=0.010043 Jy/beam ! Clean residual mean=-0.000029 rms=0.002735 Jy/beam ! Combined flux in latest and established models = 2.81073 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 539 components and 2.81073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261489Jy sigma=1.796837 ! Fit after self-cal, rms=0.261478Jy sigma=1.795493 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.6, 11.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485205 Jy ! Component: 100 - total flux cleaned = 0.00564295 Jy ! Component: 150 - total flux cleaned = 0.00564126 Jy ! Component: 200 - total flux cleaned = 0.00564249 Jy ! Component: 250 - total flux cleaned = 0.0056482 Jy ! Component: 300 - total flux cleaned = 0.00581828 Jy ! Component: 350 - total flux cleaned = 0.00597714 Jy ! Component: 400 - total flux cleaned = 0.00612866 Jy ! Total flux subtracted in 400 components = 0.00612866 Jy ! Clean residual min=-0.008033 max=0.009039 Jy/beam ! Clean residual mean=-0.000204 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 2.81686 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 615 components and 2.81686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261254Jy sigma=1.770102 ! Fit after self-cal, rms=0.261178Jy sigma=1.768875 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-44.6, -41.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023766 Jy ! Component: 100 - total flux cleaned = 0.00236576 Jy ! Component: 150 - total flux cleaned = 0.00163942 Jy ! Component: 200 - total flux cleaned = 0.00147102 Jy ! Component: 250 - total flux cleaned = 0.00147289 Jy ! Component: 300 - total flux cleaned = 0.00191305 Jy ! Component: 350 - total flux cleaned = 0.00191097 Jy ! Component: 400 - total flux cleaned = 0.0021821 Jy ! Total flux subtracted in 400 components = 0.0021821 Jy ! Clean residual min=-0.007154 max=0.006486 Jy/beam ! Clean residual mean=-0.000191 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 2.81904 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 677 components and 2.81904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260877Jy sigma=1.748501 ! Fit after self-cal, rms=0.260684Jy sigma=1.747301 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.063 mas, bmaj=1.987 mas, bpa=-15.7 degrees ! Estimated noise=0.845129 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.063 x 1.987 at -15.7 degrees (North through East) ! Clean map min=-0.014332 max=1.2715 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260684Jy sigma=1.747301 ! Fit after self-cal, rms=0.265603Jy sigma=1.431949 ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.063 mas, bmaj=1.981 mas, bpa=-15.7 degrees ! Estimated noise=0.845248 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102188 Jy ! Component: 100 - total flux cleaned = -0.000802125 Jy ! Component: 150 - total flux cleaned = -0.000376326 Jy ! Component: 200 - total flux cleaned = -0.000163611 Jy ! Component: 250 - total flux cleaned = 0.00044021 Jy ! Component: 300 - total flux cleaned = 0.000635187 Jy ! Component: 350 - total flux cleaned = 0.00101552 Jy ! Component: 400 - total flux cleaned = 0.00120436 Jy ! Total flux subtracted in 400 components = 0.00120436 Jy ! Clean residual min=-0.006602 max=0.006489 Jy/beam ! Clean residual mean=0.000038 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 2.82024 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 726 components and 2.82024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263812Jy sigma=1.418756 ! Fit after self-cal, rms=0.263588Jy sigma=1.418321 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000354678 Jy ! Component: 100 - total flux cleaned = 0.000721924 Jy ! Component: 150 - total flux cleaned = 0.000901616 Jy ! Component: 200 - total flux cleaned = 0.000907532 Jy ! Component: 250 - total flux cleaned = 0.00108243 Jy ! Component: 300 - total flux cleaned = 0.00143379 Jy ! Component: 350 - total flux cleaned = 0.00143713 Jy ! Component: 400 - total flux cleaned = 0.00161042 Jy ! Total flux subtracted in 400 components = 0.00161042 Jy ! Clean residual min=-0.006442 max=0.006343 Jy/beam ! Clean residual mean=0.000016 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 2.82185 Jy ! Performing phase self-cal ! Adding 103 model components to the UV plane model. ! The established model now contains 756 components and 2.82185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262080Jy sigma=1.410478 ! Fit after self-cal, rms=0.261877Jy sigma=1.410265 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261877Jy sigma=1.410265 ! Fit after self-cal, rms=0.260836Jy sigma=1.409489 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=0.8671 mas, bmaj=1.649 mas, bpa=-16.38 degrees ! Estimated noise=1.2887 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17416 Jy ! Component: 100 - total flux cleaned = 1.6304 Jy ! Component: 150 - total flux cleaned = 1.88054 Jy ! Component: 200 - total flux cleaned = 2.04231 Jy ! Component: 250 - total flux cleaned = 2.15532 Jy ! Component: 300 - total flux cleaned = 2.23845 Jy ! Component: 350 - total flux cleaned = 2.30222 Jy ! Component: 400 - total flux cleaned = 2.35396 Jy ! Total flux subtracted in 400 components = 2.35396 Jy ! Clean residual min=-0.022667 max=0.032827 Jy/beam ! Clean residual mean=0.002051 rms=0.006672 Jy/beam ! Combined flux in latest and established models = 2.35396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 107 model components to the UV plane model. ! The established model now contains 107 components and 2.35396 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.062 mas, bmaj=1.979 mas, bpa=-15.66 degrees ! Estimated noise=0.845149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0766932 Jy ! Component: 100 - total flux cleaned = 0.136496 Jy ! Component: 150 - total flux cleaned = 0.18499 Jy ! Component: 200 - total flux cleaned = 0.225161 Jy ! Component: 250 - total flux cleaned = 0.258943 Jy ! Component: 300 - total flux cleaned = 0.287639 Jy ! Component: 350 - total flux cleaned = 0.312404 Jy ! Component: 400 - total flux cleaned = 0.334089 Jy ! Total flux subtracted in 400 components = 0.334089 Jy ! Clean residual min=-0.011536 max=0.019385 Jy/beam ! Clean residual mean=0.002259 rms=0.004229 Jy/beam ! Combined flux in latest and established models = 2.68804 Jy ! Adding 144 model components to the UV plane model. ! The established model now contains 227 components and 2.68804 Jy ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-11.6, 3.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0215444 Jy ! Component: 100 - total flux cleaned = 0.0388805 Jy ! Component: 150 - total flux cleaned = 0.0542193 Jy ! Component: 200 - total flux cleaned = 0.0669131 Jy ! Component: 250 - total flux cleaned = 0.0749934 Jy ! Component: 300 - total flux cleaned = 0.0815567 Jy ! Component: 350 - total flux cleaned = 0.0868132 Jy ! Component: 400 - total flux cleaned = 0.0917474 Jy ! Total flux subtracted in 400 components = 0.0917474 Jy ! Clean residual min=-0.009376 max=0.012022 Jy/beam ! Clean residual mean=0.000643 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 2.77979 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 311 components and 2.77979 Jy ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-3.6, 13). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743994 Jy ! Component: 100 - total flux cleaned = 0.0101402 Jy ! Component: 150 - total flux cleaned = 0.0123269 Jy ! Component: 200 - total flux cleaned = 0.014735 Jy ! Component: 250 - total flux cleaned = 0.0173357 Jy ! Component: 300 - total flux cleaned = 0.0191997 Jy ! Component: 350 - total flux cleaned = 0.0215776 Jy ! Component: 400 - total flux cleaned = 0.0238485 Jy ! Total flux subtracted in 400 components = 0.0238485 Jy ! Clean residual min=-0.008106 max=0.009192 Jy/beam ! Clean residual mean=0.000242 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 2.80364 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 362 components and 2.80364 Jy ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (-3.4, 38.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684865 Jy ! Component: 100 - total flux cleaned = 0.00795461 Jy ! Component: 150 - total flux cleaned = 0.00901111 Jy ! Component: 200 - total flux cleaned = 0.00977166 Jy ! Component: 250 - total flux cleaned = 0.0105079 Jy ! Component: 300 - total flux cleaned = 0.0114572 Jy ! Component: 350 - total flux cleaned = 0.0116861 Jy ! Component: 400 - total flux cleaned = 0.0123684 Jy ! Total flux subtracted in 400 components = 0.0123684 Jy ! Clean residual min=-0.007377 max=0.007552 Jy/beam ! Clean residual mean=0.000125 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 2.81601 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 415 components and 2.81601 Jy ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Added new window around map position (13.6, -6.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200903 Jy ! Component: 100 - total flux cleaned = 0.00245451 Jy ! Component: 150 - total flux cleaned = 0.00266908 Jy ! Component: 200 - total flux cleaned = 0.00309281 Jy ! Component: 250 - total flux cleaned = 0.00370684 Jy ! Component: 300 - total flux cleaned = 0.00390504 Jy ! Component: 350 - total flux cleaned = 0.00429377 Jy ! Component: 400 - total flux cleaned = 0.00429043 Jy ! Total flux subtracted in 400 components = 0.00429043 Jy ! Clean residual min=-0.007100 max=0.006813 Jy/beam ! Clean residual mean=0.000043 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 2.8203 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 456 components and 2.8203 Jy ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=2.655 mas, bmaj=3.669 mas, bpa=-25.67 degrees ! Estimated noise=0.697656 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257293 Jy ! Component: 100 - total flux cleaned = 0.00115038 Jy ! Component: 150 - total flux cleaned = 0.00188315 Jy ! Component: 200 - total flux cleaned = 0.00273259 Jy ! Component: 250 - total flux cleaned = 0.00321029 Jy ! Component: 300 - total flux cleaned = 0.00351794 Jy ! Component: 350 - total flux cleaned = 0.0038081 Jy ! Component: 400 - total flux cleaned = 0.00408837 Jy ! Total flux subtracted in 400 components = 0.00408837 Jy ! Clean residual min=-0.006608 max=0.006624 Jy/beam ! Clean residual mean=0.000011 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 2.82439 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50.4, 49.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529385 Jy ! Component: 100 - total flux cleaned = 0.00811702 Jy ! Component: 150 - total flux cleaned = 0.0107119 Jy ! Component: 200 - total flux cleaned = 0.012353 Jy ! Component: 250 - total flux cleaned = 0.0136701 Jy ! Component: 300 - total flux cleaned = 0.0146897 Jy ! Component: 350 - total flux cleaned = 0.0155572 Jy ! Component: 400 - total flux cleaned = 0.0162827 Jy ! Total flux subtracted in 400 components = 0.0162827 Jy ! Clean residual min=-0.005772 max=0.005053 Jy/beam ! Clean residual mean=0.000042 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 2.84067 Jy ! Adding 146 model components to the UV plane model. ! The established model now contains 584 components and 2.84067 Jy ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! Estimated beam: bmin=1.062 mas, bmaj=1.979 mas, bpa=-15.66 degrees ! Estimated noise=0.845149 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543004 Jy ! Component: 100 - total flux cleaned = -0.000363724 Jy ! Component: 150 - total flux cleaned = -0.000539139 Jy ! Component: 200 - total flux cleaned = -0.000713401 Jy ! Component: 250 - total flux cleaned = -0.00103367 Jy ! Component: 300 - total flux cleaned = -0.000876339 Jy ! Component: 350 - total flux cleaned = -0.00103448 Jy ! Component: 400 - total flux cleaned = -0.00118504 Jy ! Total flux subtracted in 400 components = -0.00118504 Jy ! Clean residual min=-0.005930 max=0.005127 Jy/beam ! Clean residual mean=-0.000036 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 2.83948 Jy selfcal ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 640 components and 2.83948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245188Jy sigma=1.385214 ! Fit after self-cal, rms=0.240983Jy sigma=1.373436 wmodel /scr/pima/rdv94_uvs/J1230+1223_X_map.mod ! Writing 640 model components to file: /scr/pima/rdv94_uvs/J1230+1223_X_map.mod wobs /scr/pima/rdv94_uvs/J1230+1223_X_uvs.fits ! Applying 422 buffered edits. ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1230+1223_X_uvs.fits wwins /scr/pima/rdv94_uvs/J1230+1223_X_map.win ! wwins: Wrote 17 windows to /scr/pima/rdv94_uvs/J1230+1223_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155021 Jy ! Component: 100 - total flux cleaned = -0.00235363 Jy ! Component: 150 - total flux cleaned = -0.00295451 Jy ! Component: 200 - total flux cleaned = -0.00345525 Jy ! Component: 250 - total flux cleaned = -0.0036176 Jy ! Component: 300 - total flux cleaned = -0.00393668 Jy ! Component: 350 - total flux cleaned = -0.0042504 Jy ! Component: 400 - total flux cleaned = -0.00471257 Jy ! Component: 450 - total flux cleaned = -0.00509157 Jy ! Component: 500 - total flux cleaned = -0.00546509 Jy ! Component: 550 - total flux cleaned = -0.0059811 Jy ! Component: 600 - total flux cleaned = -0.0062724 Jy ! Component: 650 - total flux cleaned = -0.00655991 Jy ! Component: 700 - total flux cleaned = -0.00684444 Jy ! Component: 750 - total flux cleaned = -0.00712571 Jy ! Component: 800 - total flux cleaned = -0.00726438 Jy ! Component: 850 - total flux cleaned = -0.00747144 Jy ! Component: 900 - total flux cleaned = -0.00753975 Jy ! Component: 950 - total flux cleaned = -0.00767478 Jy ! Component: 1000 - total flux cleaned = -0.00774192 Jy ! Component: 1050 - total flux cleaned = -0.00767577 Jy ! Component: 1100 - total flux cleaned = -0.00780827 Jy ! Component: 1150 - total flux cleaned = -0.007939 Jy ! Component: 1200 - total flux cleaned = -0.00806871 Jy ! Component: 1250 - total flux cleaned = -0.00806875 Jy ! Component: 1300 - total flux cleaned = -0.00806833 Jy ! Component: 1350 - total flux cleaned = -0.0080049 Jy ! Component: 1400 - total flux cleaned = -0.00831885 Jy ! Component: 1450 - total flux cleaned = -0.00825589 Jy ! Component: 1500 - total flux cleaned = -0.00807006 Jy ! Component: 1550 - total flux cleaned = -0.00831605 Jy ! Component: 1600 - total flux cleaned = -0.00837659 Jy ! Component: 1650 - total flux cleaned = -0.00837675 Jy ! Component: 1700 - total flux cleaned = -0.00843692 Jy ! Component: 1750 - total flux cleaned = -0.00861632 Jy ! Component: 1800 - total flux cleaned = -0.0087952 Jy ! Component: 1850 - total flux cleaned = -0.00891393 Jy ! Component: 1900 - total flux cleaned = -0.00914937 Jy ! Component: 1950 - total flux cleaned = -0.00909107 Jy ! Component: 2000 - total flux cleaned = -0.00938173 Jy ! Component: 2050 - total flux cleaned = -0.00938152 Jy ! Component: 2100 - total flux cleaned = -0.00966974 Jy ! Component: 2150 - total flux cleaned = -0.00972699 Jy ! Component: 2200 - total flux cleaned = -0.0100122 Jy ! Component: 2250 - total flux cleaned = -0.0103522 Jy ! Component: 2300 - total flux cleaned = -0.010465 Jy ! Component: 2350 - total flux cleaned = -0.0108575 Jy ! Component: 2400 - total flux cleaned = -0.0110809 Jy ! Component: 2450 - total flux cleaned = -0.0111363 Jy ! Component: 2500 - total flux cleaned = -0.0114128 Jy ! Component: 2550 - total flux cleaned = -0.0115778 Jy ! Component: 2600 - total flux cleaned = -0.011852 Jy ! Component: 2650 - total flux cleaned = -0.012179 Jy ! Component: 2700 - total flux cleaned = -0.0123958 Jy ! Component: 2750 - total flux cleaned = -0.0125038 Jy ! Component: 2800 - total flux cleaned = -0.0127186 Jy ! Component: 2850 - total flux cleaned = -0.0128792 Jy ! Component: 2900 - total flux cleaned = -0.0130927 Jy ! Component: 2950 - total flux cleaned = -0.013358 Jy ! Component: 3000 - total flux cleaned = -0.0135163 Jy ! Component: 3050 - total flux cleaned = -0.0135691 Jy ! Component: 3100 - total flux cleaned = -0.0137261 Jy ! Component: 3150 - total flux cleaned = -0.0137782 Jy ! Component: 3200 - total flux cleaned = -0.0138822 Jy ! Component: 3250 - total flux cleaned = -0.0140374 Jy ! Component: 3300 - total flux cleaned = -0.0142948 Jy ! Component: 3350 - total flux cleaned = -0.0144484 Jy ! Component: 3400 - total flux cleaned = -0.0143972 Jy ! Component: 3450 - total flux cleaned = -0.0146516 Jy ! Component: 3500 - total flux cleaned = -0.0147022 Jy ! Component: 3550 - total flux cleaned = -0.0149043 Jy ! Component: 3600 - total flux cleaned = -0.0149041 Jy ! Component: 3650 - total flux cleaned = -0.0151547 Jy ! Component: 3700 - total flux cleaned = -0.0153545 Jy ! Component: 3750 - total flux cleaned = -0.0156527 Jy ! Component: 3800 - total flux cleaned = -0.0159499 Jy ! Component: 3850 - total flux cleaned = -0.016098 Jy ! Component: 3900 - total flux cleaned = -0.01654 Jy ! Component: 3950 - total flux cleaned = -0.0166872 Jy ! Component: 4000 - total flux cleaned = -0.0168822 Jy ! Component: 4050 - total flux cleaned = -0.0171738 Jy ! Total flux subtracted in 4096 components = -0.017416 Jy ! Clean residual min=-0.002635 max=0.002534 Jy/beam ! Clean residual mean=-0.000024 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 2.82207 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 900 components and 2.82207 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv94_uvs/J1230+1223_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.062 x 1.979 at -15.66 degrees (North through East) ! Clean map min=-0.0081171 max=1.289 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1230+1223_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 6% of the data. ! The x-axis pixel size should ideally be below 0.1661 milli-arcsec ! The y-axis pixel size should ideally be below 0.1851 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.2889 rms= 0.00082 Jy quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1230+1223_X_uvs.log closed on Tue Oct 8 12:19:00 2013