! Started logfile: /scr/pima/rdv94_uvs/J0629-1959_X_uvs.log on Tue Oct 8 12:13:53 2013 obs /scr/pima/rdv94_uvs/J0629-1959_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J0629-1959_X_uva.fits ! AN table 1: 3 integrations on 21 of 21 possible baselines. ! AN table 2: 2 integrations on 3 of 3 possible baselines. ! AN table 3: 67 integrations on 3 of 3 possible baselines. ! AN table 4: 20 integrations on 6 of 6 possible baselines. ! AN table 5: 10 integrations on 10 of 10 possible baselines. ! AN table 6: 5 integrations on 6 of 6 possible baselines. ! AN table 7: 6 integrations on 15 of 15 possible baselines. ! AN table 8: 5 integrations on 21 of 21 possible baselines. ! AN table 9: 2 integrations on 21 of 21 possible baselines. ! AN table 10: 3 integrations on 6 of 6 possible baselines. ! AN table 11: 3 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.878929 visibilities/baseline/integration-bin. ! Found source: J0629-1959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3020 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv94_uvs/J0629-1959_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 3:HH self-cal status=correctable weight=1 ! 3:ON self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:HH self-cal status=correctable weight=1 ! 4:ON self-cal status=correctable weight=1 ! 4:WF self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:HH self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:ON self-cal status=correctable weight=1 ! 5:WF self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:HH self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:WF self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HH self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:WF self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HH self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:WF self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 9:WF self-cal status=correctable weight=1 ! 10:FD self-cal status=correctable weight=1 ! 10:KP self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:OV self-cal status=correctable weight=1 ! 11:BR self-cal status=correctable weight=1 ! 11:FD self-cal status=correctable weight=1 ! 11:HN self-cal status=correctable weight=1 ! 11:KP self-cal status=correctable weight=1 ! 11:LA self-cal status=correctable weight=1 ! 11:NL self-cal status=correctable weight=1 ! 11:OV self-cal status=correctable weight=1 ! 11:WF self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.739961Jy sigma=25.333349 ! Fit after self-cal, rms=0.499337Jy sigma=7.311210 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 3:HH ! Flagging baselines of antenna 3:HH in the currently selected channels. flag 3:ON ! Flagging baselines of antenna 3:ON in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:HH ! Flagging baselines of antenna 4:HH in the currently selected channels. flag 4:ON ! Flagging baselines of antenna 4:ON in the currently selected channels. flag 4:WF ! Flagging baselines of antenna 4:WF in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:HH ! Flagging baselines of antenna 5:HH in the currently selected channels. flag 5:ON ! Flagging baselines of antenna 5:ON in the currently selected channels. flag 5:WF ! Flagging baselines of antenna 5:WF in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:HH ! Flagging baselines of antenna 6:HH in the currently selected channels. flag 6:WF ! Flagging baselines of antenna 6:WF in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:HH ! Flagging baselines of antenna 7:HH in the currently selected channels. flag 7:WF ! Flagging baselines of antenna 7:WF in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 8:HH ! Flagging baselines of antenna 8:HH in the currently selected channels. flag 8:WF ! Flagging baselines of antenna 8:WF in the currently selected channels. flag 9:WF ! Flagging baselines of antenna 9:WF in the currently selected channels. flag 11:WF ! Flagging baselines of antenna 11:WF in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.147 mas, bmaj=4.065 mas, bpa=-13.72 degrees ! Estimated noise=1.3893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15722 Jy ! Component: 100 - total flux cleaned = 1.40992 Jy ! Total flux subtracted in 100 components = 1.40992 Jy ! Clean residual min=-0.047249 max=0.074269 Jy/beam ! Clean residual mean=0.000071 rms=0.012489 Jy/beam ! Combined flux in latest and established models = 1.40992 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.40992 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 3. ! A total of 73 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 3. ! A total of 73 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 3. ! A total of 73 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 171 telescope corrections were flagged in sub-array 3. ! A total of 73 telescope corrections were flagged in sub-array 4. ! A total of 42 telescope corrections were flagged in sub-array 5. ! A total of 19 telescope corrections were flagged in sub-array 6. ! A total of 18 telescope corrections were flagged in sub-array 7. ! A total of 8 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=0.225893Jy sigma=4.815514 ! Fit after self-cal, rms=0.224711Jy sigma=4.807062 ! Inverting map and beam ! Estimated beam: bmin=1.147 mas, bmaj=4.065 mas, bpa=-13.72 degrees ! Estimated noise=1.3893 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0782316 Jy ! Component: 100 - total flux cleaned = 0.124203 Jy ! Total flux subtracted in 100 components = 0.124203 Jy ! Clean residual min=-0.048433 max=0.038008 Jy/beam ! Clean residual mean=-0.000153 rms=0.009674 Jy/beam ! Combined flux in latest and established models = 1.53412 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 1.53412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196463Jy sigma=4.042339 ! Fit after self-cal, rms=0.196348Jy sigma=4.040297 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.398 mas, bmaj=4.372 mas, bpa=-15.31 degrees ! Estimated noise=1.13195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0390911 Jy ! Component: 100 - total flux cleaned = 0.0645545 Jy ! Component: 150 - total flux cleaned = 0.0819788 Jy ! Component: 200 - total flux cleaned = 0.0940173 Jy ! Total flux subtracted in 200 components = 0.0940173 Jy ! Clean residual min=-0.053623 max=0.046252 Jy/beam ! Clean residual mean=-0.000595 rms=0.010368 Jy/beam ! Combined flux in latest and established models = 1.62814 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 1.62814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188418Jy sigma=3.809511 ! Fit after self-cal, rms=0.188345Jy sigma=3.808440 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 KP 1.00 LA 1.08 ! MK 1.01 OV 1.01 PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* HN 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* HN 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* HH 0.00* HN 0.00* NL 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.95 HH 1.00* HN 1.02 KP 1.00 ! LA 1.09 NL 0.95 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.94 HN 1.01 KP 1.01 LA 1.09 ! NL 0.94 OV 1.02 WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 0.95 KP 0.96 LA 1.12 OV 1.00 ! ! Telescope amplitude corrections in sub-array 11: ! BR 0.97 FD 0.93 HN 0.93 KP 0.97 ! LA 1.10 NL 0.97 OV 0.99 WF 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.92 KP 0.94 LA 1.05 ! MK 1.01 OV 0.97 PT 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* HN 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* HN 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* HH 0.00* HN 0.00* NL 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.93 HH 1.00* HN 1.01 KP 0.93 ! LA 1.06 NL 0.97 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.96 HN 1.00 KP 0.91 LA 1.04 ! NL 0.99 OV 1.00 WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 0.95 KP 0.89 LA 1.11 OV 1.00 ! ! Telescope amplitude corrections in sub-array 11: ! BR 1.29 FD 0.91 HN 0.98 KP 0.91 ! LA 1.08 NL 0.99 OV 0.97 WF 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.91 KP 0.85 LA 1.11 ! MK 1.02 OV 1.05 PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* HN 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* HN 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* HH 0.00* HN 0.00* NL 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.94 HH 1.00* HN 0.99 KP 0.87 ! LA 1.13 NL 1.01 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.95 HN 1.03 KP 0.87 LA 1.10 ! NL 1.01 OV 1.07 WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 0.93 KP 0.83 LA 1.14 OV 1.08 ! ! Telescope amplitude corrections in sub-array 11: ! BR 1.02 FD 0.91 HN 0.99 KP 0.84 ! LA 1.12 NL 1.00 OV 1.02 WF 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 KP 0.90 LA 1.10 ! MK 1.07 OV 1.01 PT 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! MK 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! HH 0.00* HN 0.00* ON 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HH 0.00* HN 0.00* WF 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* HH 0.00* HN 0.00* NL 0.00* ! WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.00 HH 1.00* HN 1.05 KP 0.91 ! LA 1.10 NL 1.03 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FD 0.97 HN 1.05 KP 0.89 LA 1.07 ! NL 1.03 OV 1.04 WF 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! FD 1.02 KP 0.85 LA 1.15 OV 1.02 ! ! Telescope amplitude corrections in sub-array 11: ! BR 1.02 FD 0.97 HN 0.99 KP 0.88 ! LA 1.12 NL 1.02 OV 0.99 WF 1.00* ! ! ! Fit before self-cal, rms=0.188345Jy sigma=3.808440 ! Fit after self-cal, rms=0.092867Jy sigma=1.936169 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.402 mas, bmaj=4.455 mas, bpa=-14.88 degrees ! Estimated noise=1.12367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0167846 Jy ! Component: 100 - total flux cleaned = -0.0184304 Jy ! Component: 150 - total flux cleaned = -0.0187518 Jy ! Component: 200 - total flux cleaned = -0.019287 Jy ! Total flux subtracted in 200 components = -0.019287 Jy ! Clean residual min=-0.012142 max=0.009946 Jy/beam ! Clean residual mean=-0.000019 rms=0.002680 Jy/beam ! Combined flux in latest and established models = 1.60885 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 1.60885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089013Jy sigma=1.858847 ! Fit after self-cal, rms=0.089144Jy sigma=1.857966 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089144Jy sigma=1.857966 ! Fit after self-cal, rms=0.087974Jy sigma=1.836315 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.402 mas, bmaj=4.465 mas, bpa=-14.94 degrees ! Estimated noise=1.12188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115859 Jy ! Component: 100 - total flux cleaned = -0.0130031 Jy ! Component: 150 - total flux cleaned = -0.0132216 Jy ! Component: 200 - total flux cleaned = -0.0134161 Jy ! Total flux subtracted in 200 components = -0.0134161 Jy ! Clean residual min=-0.009176 max=0.009145 Jy/beam ! Clean residual mean=-0.000010 rms=0.002285 Jy/beam ! Combined flux in latest and established models = 1.59543 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 1.59543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086073Jy sigma=1.798063 ! Fit after self-cal, rms=0.086068Jy sigma=1.797977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129127 Jy ! Component: 100 - total flux cleaned = -0.000261142 Jy ! Component: 150 - total flux cleaned = -0.000261477 Jy ! Component: 200 - total flux cleaned = -0.000264564 Jy ! Total flux subtracted in 200 components = -0.000264564 Jy ! Clean residual min=-0.008603 max=0.009015 Jy/beam ! Clean residual mean=-0.000010 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 1.59517 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 1.59517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085779Jy sigma=1.791060 ! Fit after self-cal, rms=0.085777Jy sigma=1.791005 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085777Jy sigma=1.791005 ! Fit after self-cal, rms=0.084896Jy sigma=1.775720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.402 mas, bmaj=4.476 mas, bpa=-15 degrees ! Estimated noise=1.12113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00731186 Jy ! Component: 100 - total flux cleaned = -0.00919888 Jy ! Component: 150 - total flux cleaned = -0.00945343 Jy ! Component: 200 - total flux cleaned = -0.00956247 Jy ! Total flux subtracted in 200 components = -0.00956247 Jy ! Clean residual min=-0.008256 max=0.008508 Jy/beam ! Clean residual mean=0.000002 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 1.58561 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 1.58561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084169Jy sigma=1.760824 ! Fit after self-cal, rms=0.084170Jy sigma=1.760785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195225 Jy ! Component: 100 - total flux cleaned = -0.000359149 Jy ! Component: 150 - total flux cleaned = -0.00049938 Jy ! Component: 200 - total flux cleaned = -0.000559773 Jy ! Total flux subtracted in 200 components = -0.000559773 Jy ! Clean residual min=-0.008000 max=0.008505 Jy/beam ! Clean residual mean=0.000002 rms=0.002000 Jy/beam ! Combined flux in latest and established models = 1.58505 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 1.58505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084057Jy sigma=1.758004 ! Fit after self-cal, rms=0.084055Jy sigma=1.757947 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084055Jy sigma=1.757947 ! Fit after self-cal, rms=0.083667Jy sigma=1.751076 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.445 mas, bmaj=5.04 mas, bpa=-15.78 degrees ! Estimated noise=1.23501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00393575 Jy ! Component: 100 - total flux cleaned = -0.00528063 Jy ! Component: 150 - total flux cleaned = -0.00558693 Jy ! Component: 200 - total flux cleaned = -0.00579632 Jy ! Total flux subtracted in 200 components = -0.00579632 Jy ! Clean residual min=-0.007083 max=0.008214 Jy/beam ! Clean residual mean=0.000006 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 1.57925 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 89 components and 1.57925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083408Jy sigma=1.745722 ! Fit after self-cal, rms=0.083405Jy sigma=1.745528 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000542404 Jy ! Component: 100 - total flux cleaned = -0.00058876 Jy ! Component: 150 - total flux cleaned = -0.00069528 Jy ! Component: 200 - total flux cleaned = -0.00079254 Jy ! Total flux subtracted in 200 components = -0.00079254 Jy ! Clean residual min=-0.006945 max=0.008193 Jy/beam ! Clean residual mean=0.000008 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 1.57846 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 1.57846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083368Jy sigma=1.744483 ! Fit after self-cal, rms=0.083368Jy sigma=1.744415 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:KP,true ! 1:KP self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 9:FD,true ! 9:FD self-cal status=fixed weight=1 selfant 9:HN,true ! 9:HN self-cal status=fixed weight=1 selfant 9:KP,true ! 9:KP self-cal status=fixed weight=1 selfant 9:LA,true ! 9:LA self-cal status=fixed weight=1 selfant 9:NL,true ! 9:NL self-cal status=fixed weight=1 selfant 9:OV,true ! 9:OV self-cal status=fixed weight=1 selfant 10:FD,true ! 10:FD self-cal status=fixed weight=1 selfant 10:KP,true ! 10:KP self-cal status=fixed weight=1 selfant 10:LA,true ! 10:LA self-cal status=fixed weight=1 selfant 10:OV,true ! 10:OV self-cal status=fixed weight=1 selfant 11:BR,true ! 11:BR self-cal status=fixed weight=1 selfant 11:FD,true ! 11:FD self-cal status=fixed weight=1 selfant 11:HN,true ! 11:HN self-cal status=fixed weight=1 selfant 11:KP,true ! 11:KP self-cal status=fixed weight=1 selfant 11:LA,true ! 11:LA self-cal status=fixed weight=1 selfant 11:NL,true ! 11:NL self-cal status=fixed weight=1 selfant 11:OV,true ! 11:OV self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.433138Jy sigma=3.219230 ! Fit after self-cal, rms=0.240406Jy sigma=1.858875 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:KP self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 3:HH self-cal status=correctable weight=1 ! 3:ON self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:HH self-cal status=correctable weight=1 ! 4:ON self-cal status=correctable weight=1 ! 4:WF self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:HH self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:ON self-cal status=correctable weight=1 ! 5:WF self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:HH self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:WF self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HH self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:WF self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HH self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:WF self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:HN self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 9:WF self-cal status=correctable weight=1 ! 10:FD self-cal status=correctable weight=1 ! 10:KP self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:OV self-cal status=correctable weight=1 ! 11:BR self-cal status=correctable weight=1 ! 11:FD self-cal status=correctable weight=1 ! 11:HN self-cal status=correctable weight=1 ! 11:KP self-cal status=correctable weight=1 ! 11:LA self-cal status=correctable weight=1 ! 11:NL self-cal status=correctable weight=1 ! 11:OV self-cal status=correctable weight=1 ! 11:WF self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 5 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.240406Jy sigma=1.858875 ! Fit after self-cal, rms=0.186698Jy sigma=1.636951 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.6874 mas, bmaj=1.143 mas, bpa=30.52 degrees ! Estimated noise=1.34886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312947 Jy ! Component: 100 - total flux cleaned = -0.00234824 Jy ! Component: 150 - total flux cleaned = -0.00404467 Jy ! Component: 200 - total flux cleaned = -0.0044621 Jy ! Total flux subtracted in 200 components = -0.0044621 Jy ! Clean residual min=-0.010157 max=0.010331 Jy/beam ! Clean residual mean=0.000097 rms=0.002272 Jy/beam ! Combined flux in latest and established models = 1.57399 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 112 components and 1.57399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185741Jy sigma=1.628586 ! Fit after self-cal, rms=0.185036Jy sigma=1.614713 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7216 mas, bmaj=1.167 mas, bpa=36.73 degrees ! Estimated noise=1.13965 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000872096 Jy ! Component: 100 - total flux cleaned = -0.000871519 Jy ! Component: 150 - total flux cleaned = -0.000874829 Jy ! Component: 200 - total flux cleaned = -0.0006223 Jy ! Component: 250 - total flux cleaned = -0.000623466 Jy ! Component: 300 - total flux cleaned = -0.000508268 Jy ! Component: 350 - total flux cleaned = -0.00050861 Jy ! Component: 400 - total flux cleaned = -0.000404098 Jy ! Total flux subtracted in 400 components = -0.000404098 Jy ! Clean residual min=-0.008409 max=0.008339 Jy/beam ! Clean residual mean=0.000124 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 1.57359 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 1.57359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184187Jy sigma=1.610328 ! Fit after self-cal, rms=0.184191Jy sigma=1.609291 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304696 Jy ! Component: 100 - total flux cleaned = -0.000418998 Jy ! Component: 150 - total flux cleaned = -0.000212069 Jy ! Component: 200 - total flux cleaned = -0.000109629 Jy ! Component: 250 - total flux cleaned = -1.55883e-05 Jy ! Component: 300 - total flux cleaned = 7.9449e-05 Jy ! Component: 350 - total flux cleaned = 0.000170204 Jy ! Component: 400 - total flux cleaned = 0.000258287 Jy ! Total flux subtracted in 400 components = 0.000258287 Jy ! Clean residual min=-0.008325 max=0.008179 Jy/beam ! Clean residual mean=0.000119 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 1.57385 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 1.57385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183684Jy sigma=1.606821 ! Fit after self-cal, rms=0.183683Jy sigma=1.606229 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 201 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 4 telescope corrections were flagged in sub-array 6. ! A total of 12 telescope corrections were flagged in sub-array 7. ! A total of 7 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.369109Jy sigma=2.615444 ! Fit after self-cal, rms=0.183274Jy sigma=1.602920 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7214 mas, bmaj=1.167 mas, bpa=36.75 degrees ! Estimated noise=1.13897 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211858 Jy ! Component: 100 - total flux cleaned = -0.00263784 Jy ! Component: 150 - total flux cleaned = -0.00274854 Jy ! Component: 200 - total flux cleaned = -0.00284731 Jy ! Component: 250 - total flux cleaned = -0.00294137 Jy ! Component: 300 - total flux cleaned = -0.00294402 Jy ! Component: 350 - total flux cleaned = -0.0031233 Jy ! Component: 400 - total flux cleaned = -0.00320553 Jy ! Total flux subtracted in 400 components = -0.00320553 Jy ! Clean residual min=-0.007943 max=0.007842 Jy/beam ! Clean residual mean=0.000116 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 1.57064 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 1.57064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182729Jy sigma=1.599706 ! Fit after self-cal, rms=0.182720Jy sigma=1.599221 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.76369e-05 Jy ! Component: 100 - total flux cleaned = -0.000360907 Jy ! Component: 150 - total flux cleaned = -0.000362689 Jy ! Component: 200 - total flux cleaned = -0.000363815 Jy ! Component: 250 - total flux cleaned = -0.000363388 Jy ! Component: 300 - total flux cleaned = -0.000363704 Jy ! Component: 350 - total flux cleaned = -0.000435098 Jy ! Component: 400 - total flux cleaned = -0.000435268 Jy ! Total flux subtracted in 400 components = -0.000435268 Jy ! Clean residual min=-0.007793 max=0.007718 Jy/beam ! Clean residual mean=0.000125 rms=0.001652 Jy/beam ! Combined flux in latest and established models = 1.57021 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 137 components and 1.57021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182436Jy sigma=1.597787 ! Fit after self-cal, rms=0.182430Jy sigma=1.597469 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182430Jy sigma=1.597469 ! Fit after self-cal, rms=0.180106Jy sigma=1.587150 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7216 mas, bmaj=1.167 mas, bpa=36.78 degrees ! Estimated noise=1.13903 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017752 Jy ! Component: 100 - total flux cleaned = -0.00210277 Jy ! Component: 150 - total flux cleaned = -0.00230474 Jy ! Component: 200 - total flux cleaned = -0.00236748 Jy ! Component: 250 - total flux cleaned = -0.00242686 Jy ! Component: 300 - total flux cleaned = -0.00248498 Jy ! Component: 350 - total flux cleaned = -0.00254054 Jy ! Component: 400 - total flux cleaned = -0.002647 Jy ! Total flux subtracted in 400 components = -0.002647 Jy ! Clean residual min=-0.006815 max=0.006320 Jy/beam ! Clean residual mean=0.000132 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 1.56756 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 149 components and 1.56756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179990Jy sigma=1.585756 ! Fit after self-cal, rms=0.179983Jy sigma=1.585446 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241052 Jy ! Component: 100 - total flux cleaned = -0.000241628 Jy ! Component: 150 - total flux cleaned = -0.000240346 Jy ! Component: 200 - total flux cleaned = -0.000240314 Jy ! Component: 250 - total flux cleaned = -0.000190122 Jy ! Component: 300 - total flux cleaned = -0.000238854 Jy ! Component: 350 - total flux cleaned = -0.000287975 Jy ! Component: 400 - total flux cleaned = -0.000332463 Jy ! Total flux subtracted in 400 components = -0.000332463 Jy ! Clean residual min=-0.006757 max=0.006206 Jy/beam ! Clean residual mean=0.000139 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 1.56723 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 149 components and 1.56723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179918Jy sigma=1.584838 ! Fit after self-cal, rms=0.179908Jy sigma=1.584644 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179908Jy sigma=1.584644 ! Fit after self-cal, rms=0.172032Jy sigma=1.539651 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=2.329 mas, bmaj=5.277 mas, bpa=-16.96 degrees ! Estimated noise=1.28775 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659756 Jy ! Component: 100 - total flux cleaned = -0.000518216 Jy ! Component: 150 - total flux cleaned = -0.00044337 Jy ! Component: 200 - total flux cleaned = -0.00044373 Jy ! Component: 250 - total flux cleaned = -0.000423438 Jy ! Component: 300 - total flux cleaned = -0.00038569 Jy ! Component: 350 - total flux cleaned = -0.000350345 Jy ! Component: 400 - total flux cleaned = -0.000332138 Jy ! Total flux subtracted in 400 components = -0.000332138 Jy ! Clean residual min=-0.006108 max=0.007806 Jy/beam ! Clean residual mean=0.000433 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 1.5669 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 159 components and 1.5669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172039Jy sigma=1.539872 ! Fit after self-cal, rms=0.172066Jy sigma=1.539666 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.4, -23.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741793 Jy ! Component: 100 - total flux cleaned = 0.00727274 Jy ! Component: 150 - total flux cleaned = 0.0069877 Jy ! Component: 200 - total flux cleaned = 0.00674785 Jy ! Component: 250 - total flux cleaned = 0.00663315 Jy ! Component: 300 - total flux cleaned = 0.00652448 Jy ! Component: 350 - total flux cleaned = 0.00642752 Jy ! Component: 400 - total flux cleaned = 0.00642785 Jy ! Total flux subtracted in 400 components = 0.00642785 Jy ! Clean residual min=-0.005346 max=0.006231 Jy/beam ! Clean residual mean=0.000188 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 1.57333 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 212 components and 1.57333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171830Jy sigma=1.530055 ! Fit after self-cal, rms=0.171802Jy sigma=1.529406 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Added new window around map position (25.8, 0.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559349 Jy ! Component: 100 - total flux cleaned = 0.00758838 Jy ! Component: 150 - total flux cleaned = 0.00829876 Jy ! Component: 200 - total flux cleaned = 0.00918022 Jy ! Component: 250 - total flux cleaned = 0.0097488 Jy ! Component: 300 - total flux cleaned = 0.00996034 Jy ! Component: 350 - total flux cleaned = 0.0101603 Jy ! Component: 400 - total flux cleaned = 0.0103476 Jy ! Total flux subtracted in 400 components = 0.0103476 Jy ! Clean residual min=-0.005267 max=0.004537 Jy/beam ! Clean residual mean=-0.000184 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 1.58367 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 268 components and 1.58367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171606Jy sigma=1.522642 ! Fit after self-cal, rms=0.171612Jy sigma=1.522087 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7219 mas, bmaj=1.167 mas, bpa=36.79 degrees ! Estimated noise=1.13902 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7219 x 1.167 at 36.79 degrees (North through East) ! Clean map min=-0.010175 max=1.4009 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171612Jy sigma=1.522087 ! Fit after self-cal, rms=0.147021Jy sigma=1.341600 ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7212 mas, bmaj=1.167 mas, bpa=36.78 degrees ! Estimated noise=1.13834 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000890175 Jy ! Component: 100 - total flux cleaned = 0.00124832 Jy ! Component: 150 - total flux cleaned = 0.00140486 Jy ! Component: 200 - total flux cleaned = 0.00140132 Jy ! Component: 250 - total flux cleaned = 0.00140165 Jy ! Component: 300 - total flux cleaned = 0.00168145 Jy ! Component: 350 - total flux cleaned = 0.00195151 Jy ! Component: 400 - total flux cleaned = 0.00181814 Jy ! Total flux subtracted in 400 components = 0.00181814 Jy ! Clean residual min=-0.005518 max=0.004573 Jy/beam ! Clean residual mean=-0.000101 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 1.58549 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 345 components and 1.58549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146160Jy sigma=1.332200 ! Fit after self-cal, rms=0.146163Jy sigma=1.331847 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273077 Jy ! Component: 100 - total flux cleaned = 0.000272849 Jy ! Component: 150 - total flux cleaned = 0.000272297 Jy ! Component: 200 - total flux cleaned = 0.000272386 Jy ! Component: 250 - total flux cleaned = 0.000387218 Jy ! Component: 300 - total flux cleaned = 0.000385627 Jy ! Component: 350 - total flux cleaned = 0.000165159 Jy ! Component: 400 - total flux cleaned = 0.00027547 Jy ! Total flux subtracted in 400 components = 0.00027547 Jy ! Clean residual min=-0.005135 max=0.004232 Jy/beam ! Clean residual mean=-0.000111 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 1.58577 Jy ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 380 components and 1.58577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145625Jy sigma=1.326630 ! Fit after self-cal, rms=0.145627Jy sigma=1.326486 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145627Jy sigma=1.326486 ! Fit after self-cal, rms=0.145440Jy sigma=1.325616 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.6866 mas, bmaj=1.142 mas, bpa=30.59 degrees ! Estimated noise=1.34819 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13598 Jy ! Component: 100 - total flux cleaned = 1.38487 Jy ! Component: 150 - total flux cleaned = 1.45332 Jy ! Component: 200 - total flux cleaned = 1.48858 Jy ! Component: 250 - total flux cleaned = 1.51103 Jy ! Component: 300 - total flux cleaned = 1.52474 Jy ! Component: 350 - total flux cleaned = 1.53123 Jy ! Component: 400 - total flux cleaned = 1.53638 Jy ! Total flux subtracted in 400 components = 1.53638 Jy ! Clean residual min=-0.008262 max=0.008307 Jy/beam ! Clean residual mean=0.000166 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 1.53638 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 1.53638 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7213 mas, bmaj=1.167 mas, bpa=36.79 degrees ! Estimated noise=1.13839 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 1.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110727 Jy ! Component: 100 - total flux cleaned = 0.0193704 Jy ! Component: 150 - total flux cleaned = 0.0252285 Jy ! Component: 200 - total flux cleaned = 0.0289419 Jy ! Component: 250 - total flux cleaned = 0.0312235 Jy ! Component: 300 - total flux cleaned = 0.0329227 Jy ! Component: 350 - total flux cleaned = 0.0343225 Jy ! Component: 400 - total flux cleaned = 0.0354529 Jy ! Total flux subtracted in 400 components = 0.0354529 Jy ! Clean residual min=-0.005459 max=0.005768 Jy/beam ! Clean residual mean=0.000210 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.57183 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 123 components and 1.57183 Jy ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Added new window around map position (-24.2, 25.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353751 Jy ! Component: 100 - total flux cleaned = 0.00456746 Jy ! Component: 150 - total flux cleaned = 0.00571538 Jy ! Component: 200 - total flux cleaned = 0.0065027 Jy ! Component: 250 - total flux cleaned = 0.00710984 Jy ! Component: 300 - total flux cleaned = 0.00769861 Jy ! Component: 350 - total flux cleaned = 0.00812498 Jy ! Component: 400 - total flux cleaned = 0.0085385 Jy ! Total flux subtracted in 400 components = 0.0085385 Jy ! Clean residual min=-0.004734 max=0.004596 Jy/beam ! Clean residual mean=0.000053 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 1.58037 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 177 components and 1.58037 Jy ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=2.328 mas, bmaj=5.28 mas, bpa=-16.96 degrees ! Estimated noise=1.28751 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252722 Jy ! Component: 100 - total flux cleaned = 0.00291895 Jy ! Component: 150 - total flux cleaned = 0.0036179 Jy ! Component: 200 - total flux cleaned = 0.00383267 Jy ! Component: 250 - total flux cleaned = 0.00413355 Jy ! Component: 300 - total flux cleaned = 0.00422856 Jy ! Component: 350 - total flux cleaned = 0.00440807 Jy ! Component: 400 - total flux cleaned = 0.00440526 Jy ! Total flux subtracted in 400 components = 0.00440526 Jy ! Clean residual min=-0.004729 max=0.004366 Jy/beam ! Clean residual mean=-0.000105 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 1.58478 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.24782e-05 Jy ! Component: 100 - total flux cleaned = 0.000161401 Jy ! Component: 150 - total flux cleaned = 8.56739e-05 Jy ! Component: 200 - total flux cleaned = 0.000233438 Jy ! Component: 250 - total flux cleaned = 0.000234457 Jy ! Component: 300 - total flux cleaned = 0.00030253 Jy ! Component: 350 - total flux cleaned = 0.000235101 Jy ! Component: 400 - total flux cleaned = 0.000367814 Jy ! Total flux subtracted in 400 components = 0.000367814 Jy ! Clean residual min=-0.004423 max=0.004096 Jy/beam ! Clean residual mean=-0.000136 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 1.58515 Jy ! Adding 121 model components to the UV plane model. ! The established model now contains 291 components and 1.58515 Jy ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! Estimated beam: bmin=0.7213 mas, bmaj=1.167 mas, bpa=36.79 degrees ! Estimated noise=1.13839 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486639 Jy ! Component: 100 - total flux cleaned = -0.00024466 Jy ! Component: 150 - total flux cleaned = -0.000244914 Jy ! Component: 200 - total flux cleaned = -0.00013189 Jy ! Component: 250 - total flux cleaned = -2.15458e-05 Jy ! Component: 300 - total flux cleaned = -0.000124164 Jy ! Component: 350 - total flux cleaned = -2.2144e-05 Jy ! Component: 400 - total flux cleaned = -0.000119035 Jy ! Total flux subtracted in 400 components = -0.000119035 Jy ! Clean residual min=-0.004560 max=0.003820 Jy/beam ! Clean residual mean=-0.000068 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 1.58503 Jy selfcal ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 336 components and 1.58503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144581Jy sigma=1.318066 ! Fit after self-cal, rms=0.144457Jy sigma=1.316494 wmodel /scr/pima/rdv94_uvs/J0629-1959_X_map.mod ! Writing 336 model components to file: /scr/pima/rdv94_uvs/J0629-1959_X_map.mod wobs /scr/pima/rdv94_uvs/J0629-1959_X_uvs.fits ! Applying 2087 buffered edits. ! Writing UV FITS file: /scr/pima/rdv94_uvs/J0629-1959_X_uvs.fits wwins /scr/pima/rdv94_uvs/J0629-1959_X_map.win ! wwins: Wrote 5 windows to /scr/pima/rdv94_uvs/J0629-1959_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158949 Jy ! Component: 100 - total flux cleaned = -0.00245924 Jy ! Component: 150 - total flux cleaned = -0.00308607 Jy ! Component: 200 - total flux cleaned = -0.00376058 Jy ! Component: 250 - total flux cleaned = -0.00435121 Jy ! Component: 300 - total flux cleaned = -0.00479982 Jy ! Component: 350 - total flux cleaned = -0.00505088 Jy ! Component: 400 - total flux cleaned = -0.00517461 Jy ! Component: 450 - total flux cleaned = -0.00547568 Jy ! Component: 500 - total flux cleaned = -0.00559417 Jy ! Component: 550 - total flux cleaned = -0.00582672 Jy ! Component: 600 - total flux cleaned = -0.00594131 Jy ! Component: 650 - total flux cleaned = -0.00616733 Jy ! Component: 700 - total flux cleaned = -0.00627849 Jy ! Component: 750 - total flux cleaned = -0.00633351 Jy ! Component: 800 - total flux cleaned = -0.00644172 Jy ! Component: 850 - total flux cleaned = -0.00649516 Jy ! Component: 900 - total flux cleaned = -0.00654786 Jy ! Component: 950 - total flux cleaned = -0.00654747 Jy ! Component: 1000 - total flux cleaned = -0.0064957 Jy ! Component: 1050 - total flux cleaned = -0.00659854 Jy ! Component: 1100 - total flux cleaned = -0.00669938 Jy ! Component: 1150 - total flux cleaned = -0.00659797 Jy ! Component: 1200 - total flux cleaned = -0.00669792 Jy ! Component: 1250 - total flux cleaned = -0.00669824 Jy ! Component: 1300 - total flux cleaned = -0.00684521 Jy ! Component: 1350 - total flux cleaned = -0.00679641 Jy ! Component: 1400 - total flux cleaned = -0.00684478 Jy ! Component: 1450 - total flux cleaned = -0.00689278 Jy ! Component: 1500 - total flux cleaned = -0.00684518 Jy ! Component: 1550 - total flux cleaned = -0.00689216 Jy ! Component: 1600 - total flux cleaned = -0.00684581 Jy ! Component: 1650 - total flux cleaned = -0.0070318 Jy ! Component: 1700 - total flux cleaned = -0.00707766 Jy ! Component: 1750 - total flux cleaned = -0.00716896 Jy ! Component: 1800 - total flux cleaned = -0.00716911 Jy ! Component: 1850 - total flux cleaned = -0.00725935 Jy ! Component: 1900 - total flux cleaned = -0.00730396 Jy ! Component: 1950 - total flux cleaned = -0.00734856 Jy ! Component: 2000 - total flux cleaned = -0.00739281 Jy ! Component: 2050 - total flux cleaned = -0.00748031 Jy ! Component: 2100 - total flux cleaned = -0.00743687 Jy ! Component: 2150 - total flux cleaned = -0.007437 Jy ! Component: 2200 - total flux cleaned = -0.00756604 Jy ! Component: 2250 - total flux cleaned = -0.00752322 Jy ! Component: 2300 - total flux cleaned = -0.00756572 Jy ! Component: 2350 - total flux cleaned = -0.00760793 Jy ! Component: 2400 - total flux cleaned = -0.00756595 Jy ! Component: 2450 - total flux cleaned = -0.0076912 Jy ! Component: 2500 - total flux cleaned = -0.00760803 Jy ! Component: 2550 - total flux cleaned = -0.0075258 Jy ! Component: 2600 - total flux cleaned = -0.00764911 Jy ! Component: 2650 - total flux cleaned = -0.00760817 Jy ! Component: 2700 - total flux cleaned = -0.00760822 Jy ! Component: 2750 - total flux cleaned = -0.00760849 Jy ! Component: 2800 - total flux cleaned = -0.0076886 Jy ! Component: 2850 - total flux cleaned = -0.00764857 Jy ! Component: 2900 - total flux cleaned = -0.00768825 Jy ! Component: 2950 - total flux cleaned = -0.00772762 Jy ! Component: 3000 - total flux cleaned = -0.00768825 Jy ! Component: 3050 - total flux cleaned = -0.00780559 Jy ! Component: 3100 - total flux cleaned = -0.00780542 Jy ! Component: 3150 - total flux cleaned = -0.00784397 Jy ! Component: 3200 - total flux cleaned = -0.0077285 Jy ! Component: 3250 - total flux cleaned = -0.00784364 Jy ! Component: 3300 - total flux cleaned = -0.00780552 Jy ! Component: 3350 - total flux cleaned = -0.00784347 Jy ! Component: 3400 - total flux cleaned = -0.0078435 Jy ! Component: 3450 - total flux cleaned = -0.00788128 Jy ! Component: 3500 - total flux cleaned = -0.0078813 Jy ! Component: 3550 - total flux cleaned = -0.00788125 Jy ! Component: 3600 - total flux cleaned = -0.00791836 Jy ! Component: 3650 - total flux cleaned = -0.0079922 Jy ! Component: 3700 - total flux cleaned = -0.00799208 Jy ! Component: 3750 - total flux cleaned = -0.0079921 Jy ! Component: 3800 - total flux cleaned = -0.00802851 Jy ! Component: 3850 - total flux cleaned = -0.00799216 Jy ! Component: 3900 - total flux cleaned = -0.00806452 Jy ! Component: 3950 - total flux cleaned = -0.00799271 Jy ! Component: 4000 - total flux cleaned = -0.00810048 Jy ! Component: 4050 - total flux cleaned = -0.00806478 Jy ! Total flux subtracted in 4096 components = -0.00810052 Jy ! Clean residual min=-0.001910 max=0.002326 Jy/beam ! Clean residual mean=0.000025 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 1.57693 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 626 components and 1.57693 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv94_uvs/J0629-1959_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7213 x 1.167 at 36.79 degrees (North through East) ! Clean map min=-0.0054696 max=1.4295 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0629-1959_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 3.83% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.4295 rms= 0.00058 Jy quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J0629-1959_X_uvs.log closed on Tue Oct 8 12:13:59 2013