! Started logfile: /scr/pima/rdv94_uvs/J0118-2141_X_uvs.log on Tue Oct 8 12:09:42 2013 obs /scr/pima/rdv94_uvs/J0118-2141_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J0118-2141_X_uva.fits ! AN table 1: 88 integrations on 3 of 3 possible baselines. ! AN table 2: 15 integrations on 1 of 1 possible baselines. ! AN table 3: 17 integrations on 6 of 6 possible baselines. ! AN table 4: 7 integrations on 1 of 1 possible baselines. ! AN table 5: 9 integrations on 15 of 15 possible baselines. ! AN table 6: 9 integrations on 21 of 21 possible baselines. ! AN table 7: 4 integrations on 21 of 21 possible baselines. ! AN table 8: 3 integrations on 28 of 28 possible baselines. ! AN table 9: 2 integrations on 21 of 21 possible baselines. ! AN table 10: 2 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.846639 visibilities/baseline/integration-bin. ! Found source: J0118-2141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3224 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv94_uvs/J0118-2141_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:ON self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:ON self-cal status=correctable weight=1 ! 3:HH self-cal status=correctable weight=1 ! 3:ON self-cal status=correctable weight=1 ! 3:WF self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:WF self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HH self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:WF self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HH self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:WF self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:WF self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:WF self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 10:BR self-cal status=correctable weight=1 ! 10:FD self-cal status=correctable weight=1 ! 10:KP self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:MK self-cal status=correctable weight=1 ! 10:OV self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 1 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.301681Jy sigma=12.288813 ! Fit after self-cal, rms=0.290757Jy sigma=1.693678 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:HH ! Flagging baselines of antenna 1:HH in the currently selected channels. flag 1:ON ! Flagging baselines of antenna 1:ON in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:HH ! Flagging baselines of antenna 2:HH in the currently selected channels. flag 2:ON ! Flagging baselines of antenna 2:ON in the currently selected channels. flag 3:HH ! Flagging baselines of antenna 3:HH in the currently selected channels. flag 3:ON ! Flagging baselines of antenna 3:ON in the currently selected channels. flag 3:WF ! Flagging baselines of antenna 3:WF in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:WF ! Flagging baselines of antenna 4:WF in the currently selected channels. flag 5:HH ! Flagging baselines of antenna 5:HH in the currently selected channels. flag 5:WF ! Flagging baselines of antenna 5:WF in the currently selected channels. flag 6:HH ! Flagging baselines of antenna 6:HH in the currently selected channels. flag 6:WF ! Flagging baselines of antenna 6:WF in the currently selected channels. flag 7:WF ! Flagging baselines of antenna 7:WF in the currently selected channels. flag 8:WF ! Flagging baselines of antenna 8:WF in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=3.942 mas, bpa=-14.78 degrees ! Estimated noise=2.06944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.723695 Jy ! Component: 100 - total flux cleaned = 0.8859 Jy ! Total flux subtracted in 100 components = 0.8859 Jy ! Clean residual min=-0.029159 max=0.056838 Jy/beam ! Clean residual mean=0.000103 rms=0.008326 Jy/beam ! Combined flux in latest and established models = 0.8859 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.8859 Jy ! ! Correcting IF 1. ! A total of 258 telescope corrections were flagged in sub-array 1. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 258 telescope corrections were flagged in sub-array 1. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 258 telescope corrections were flagged in sub-array 1. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 258 telescope corrections were flagged in sub-array 1. ! A total of 67 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 5. ! A total of 10 telescope corrections were flagged in sub-array 6. ! A total of 4 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.163648Jy sigma=2.214442 ! Fit after self-cal, rms=0.163274Jy sigma=2.211920 ! Inverting map and beam ! Estimated beam: bmin=1.058 mas, bmaj=3.942 mas, bpa=-14.78 degrees ! Estimated noise=2.06944 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591363 Jy ! Component: 100 - total flux cleaned = 0.0901087 Jy ! Total flux subtracted in 100 components = 0.0901087 Jy ! Clean residual min=-0.027024 max=0.023205 Jy/beam ! Clean residual mean=0.000074 rms=0.006375 Jy/beam ! Combined flux in latest and established models = 0.976009 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.976009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143837Jy sigma=1.792210 ! Fit after self-cal, rms=0.143819Jy sigma=1.791873 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.29 mas, bmaj=4.662 mas, bpa=-17.41 degrees ! Estimated noise=1.63334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355556 Jy ! Component: 100 - total flux cleaned = 0.05872 Jy ! Component: 150 - total flux cleaned = 0.074559 Jy ! Component: 200 - total flux cleaned = 0.0857839 Jy ! Total flux subtracted in 200 components = 0.0857839 Jy ! Clean residual min=-0.027951 max=0.025170 Jy/beam ! Clean residual mean=0.000058 rms=0.006020 Jy/beam ! Combined flux in latest and established models = 1.06179 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 56 components and 1.06179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133389Jy sigma=1.631978 ! Fit after self-cal, rms=0.133347Jy sigma=1.631480 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 HH 1.00* HN 1.17 LA 1.05 ! NL 1.16 WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.94 HH 1.00* HN 1.01 KP 0.98 ! LA 1.05 NL 1.03 WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.93 HN 0.97 KP 1.00 LA 1.07 ! NL 0.98 OV 1.03 WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 FD 0.94 HN 0.95 KP 0.97 ! LA 1.05 NL 0.95 OV 0.98 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.00 FD 0.94 KP 0.99 LA 1.09 ! MK 1.03 NL 1.00 OV 1.01 ! ! Telescope amplitude corrections in sub-array 10: ! BR 0.97 FD 0.94 KP 0.97 LA 1.16 ! MK 1.11 OV 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.90 HH 1.00* HN 1.02 LA 1.10 ! NL 1.24 WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.94 HH 1.00* HN 1.04 KP 0.89 ! LA 1.06 NL 1.00 WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.93 HN 1.00 KP 0.94 LA 1.03 ! NL 0.99 OV 1.00 WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.23 FD 0.94 HN 0.99 KP 0.90 ! LA 1.00 NL 0.94 OV 0.95 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.04 FD 0.96 KP 0.93 LA 1.07 ! MK 1.03 NL 0.99 OV 0.96 ! ! Telescope amplitude corrections in sub-array 10: ! BR 1.19 FD 0.94 KP 0.95 LA 1.14 ! MK 1.10 OV 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.97 HH 1.00* HN 1.16 LA 1.09 ! NL 1.18 WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.92 HH 1.00* HN 1.09 KP 0.84 ! LA 1.09 NL 1.04 WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.91 HN 1.02 KP 0.86 LA 1.13 ! NL 1.01 OV 1.06 WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.05 FD 0.93 HN 1.00 KP 0.84 ! LA 1.08 NL 0.97 OV 1.05 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.05 FD 0.94 KP 0.87 LA 1.15 ! MK 1.00 NL 1.02 OV 1.02 ! ! Telescope amplitude corrections in sub-array 10: ! BR 1.06 FD 0.93 KP 0.86 LA 1.23 ! MK 1.10 OV 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* ON 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HH 0.00* ON 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* ON 0.00* WF 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! HN 0.00* WF 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.99 HH 1.00* HN 1.14 LA 1.10 ! NL 1.21 WF 1.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.01 HH 1.00* HN 1.06 KP 0.91 ! LA 1.05 NL 1.05 WF 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.98 HN 0.98 KP 0.92 LA 1.10 ! NL 1.04 OV 1.03 WF 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 FD 0.97 HN 0.99 KP 0.87 ! LA 1.07 NL 1.00 OV 1.00 WF 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.04 FD 0.99 KP 0.87 LA 1.13 ! MK 1.09 NL 1.05 OV 1.01 ! ! Telescope amplitude corrections in sub-array 10: ! BR 1.07 FD 1.00 KP 0.86 LA 1.18 ! MK 1.16 OV 1.00 ! ! ! Fit before self-cal, rms=0.133347Jy sigma=1.631480 ! Fit after self-cal, rms=0.090078Jy sigma=0.975510 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.298 mas, bmaj=4.702 mas, bpa=-17.45 degrees ! Estimated noise=1.63123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.4, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117228 Jy ! Component: 100 - total flux cleaned = -0.000638098 Jy ! Component: 150 - total flux cleaned = -0.00150542 Jy ! Component: 200 - total flux cleaned = -0.00263007 Jy ! Total flux subtracted in 200 components = -0.00263007 Jy ! Clean residual min=-0.008006 max=0.005991 Jy/beam ! Clean residual mean=0.000004 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 1.05916 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 1.05916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088506Jy sigma=0.954540 ! Fit after self-cal, rms=0.088710Jy sigma=0.953643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088710Jy sigma=0.953643 ! Fit after self-cal, rms=0.088522Jy sigma=0.952076 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.298 mas, bmaj=4.706 mas, bpa=-17.46 degrees ! Estimated noise=1.62876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234719 Jy ! Component: 100 - total flux cleaned = -0.00323175 Jy ! Component: 150 - total flux cleaned = -0.00446895 Jy ! Component: 200 - total flux cleaned = -0.00571879 Jy ! Total flux subtracted in 200 components = -0.00571879 Jy ! Clean residual min=-0.007248 max=0.005441 Jy/beam ! Clean residual mean=0.000002 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 1.05344 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 1.05344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087869Jy sigma=0.943160 ! Fit after self-cal, rms=0.087862Jy sigma=0.943027 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000761073 Jy ! Component: 100 - total flux cleaned = -0.00170317 Jy ! Component: 150 - total flux cleaned = -0.00236259 Jy ! Component: 200 - total flux cleaned = -0.00297565 Jy ! Total flux subtracted in 200 components = -0.00297565 Jy ! Clean residual min=-0.007052 max=0.005124 Jy/beam ! Clean residual mean=0.000003 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 1.05047 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 1.05047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087565Jy sigma=0.939350 ! Fit after self-cal, rms=0.087563Jy sigma=0.939294 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087563Jy sigma=0.939294 ! Fit after self-cal, rms=0.087472Jy sigma=0.937645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.298 mas, bmaj=4.71 mas, bpa=-17.47 degrees ! Estimated noise=1.62654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354665 Jy ! Component: 100 - total flux cleaned = -0.00481507 Jy ! Component: 150 - total flux cleaned = -0.0057963 Jy ! Component: 200 - total flux cleaned = -0.00660351 Jy ! Total flux subtracted in 200 components = -0.00660351 Jy ! Clean residual min=-0.006679 max=0.005092 Jy/beam ! Clean residual mean=0.000001 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 1.04386 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 100 components and 1.04386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087173Jy sigma=0.933566 ! Fit after self-cal, rms=0.087171Jy sigma=0.933538 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000338146 Jy ! Component: 100 - total flux cleaned = -0.000497219 Jy ! Component: 150 - total flux cleaned = -0.000651658 Jy ! Component: 200 - total flux cleaned = -0.000870896 Jy ! Total flux subtracted in 200 components = -0.000870896 Jy ! Clean residual min=-0.006604 max=0.005050 Jy/beam ! Clean residual mean=0.000001 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 1.04299 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 107 components and 1.04299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087028Jy sigma=0.931853 ! Fit after self-cal, rms=0.087029Jy sigma=0.931838 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087029Jy sigma=0.931838 ! Fit after self-cal, rms=0.087014Jy sigma=0.930805 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.273 mas, bmaj=5.125 mas, bpa=-16.79 degrees ! Estimated noise=1.75138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00262799 Jy ! Component: 100 - total flux cleaned = -0.00323395 Jy ! Component: 150 - total flux cleaned = -0.00354637 Jy ! Component: 200 - total flux cleaned = -0.00390742 Jy ! Total flux subtracted in 200 components = -0.00390742 Jy ! Clean residual min=-0.006135 max=0.005949 Jy/beam ! Clean residual mean=-0.000000 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 1.03909 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 1.03909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086953Jy sigma=0.929377 ! Fit after self-cal, rms=0.086949Jy sigma=0.929309 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518412 Jy ! Component: 100 - total flux cleaned = -0.000602535 Jy ! Component: 150 - total flux cleaned = -0.000679189 Jy ! Component: 200 - total flux cleaned = -0.000789702 Jy ! Total flux subtracted in 200 components = -0.000789702 Jy ! Clean residual min=-0.006045 max=0.005934 Jy/beam ! Clean residual mean=-0.000000 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 1.0383 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 1.0383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086915Jy sigma=0.928875 ! Fit after self-cal, rms=0.086915Jy sigma=0.928861 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 5:FD,true ! 5:FD self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:LA,true ! 5:LA self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:KP,true ! 6:KP self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:KP,true ! 7:KP self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 9:BR,true ! 9:BR self-cal status=fixed weight=1 selfant 9:FD,true ! 9:FD self-cal status=fixed weight=1 selfant 9:KP,true ! 9:KP self-cal status=fixed weight=1 selfant 9:LA,true ! 9:LA self-cal status=fixed weight=1 selfant 9:MK,true ! 9:MK self-cal status=fixed weight=1 selfant 9:NL,true ! 9:NL self-cal status=fixed weight=1 selfant 9:OV,true ! 9:OV self-cal status=fixed weight=1 selfant 10:BR,true ! 10:BR self-cal status=fixed weight=1 selfant 10:FD,true ! 10:FD self-cal status=fixed weight=1 selfant 10:KP,true ! 10:KP self-cal status=fixed weight=1 selfant 10:LA,true ! 10:LA self-cal status=fixed weight=1 selfant 10:MK,true ! 10:MK self-cal status=fixed weight=1 selfant 10:OV,true ! 10:OV self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 8 telescope corrections were flagged in sub-array 5. ! A total of 8 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.327362Jy sigma=1.444036 ! Fit after self-cal, rms=0.195702Jy sigma=0.871311 selfant "",false ! 1:HH self-cal status=correctable weight=1 ! 1:ON self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:HH self-cal status=correctable weight=1 ! 2:ON self-cal status=correctable weight=1 ! 3:HH self-cal status=correctable weight=1 ! 3:ON self-cal status=correctable weight=1 ! 3:WF self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:WF self-cal status=correctable weight=1 ! 5:FD self-cal status=correctable weight=1 ! 5:HH self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:LA self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:WF self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HH self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:KP self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:WF self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:KP self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:WF self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:WF self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:FD self-cal status=correctable weight=1 ! 9:KP self-cal status=correctable weight=1 ! 9:LA self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:NL self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 10:BR self-cal status=correctable weight=1 ! 10:FD self-cal status=correctable weight=1 ! 10:KP self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:MK self-cal status=correctable weight=1 ! 10:OV self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 16 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.195702Jy sigma=0.871311 ! Fit after self-cal, rms=0.195260Jy sigma=0.868562 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=0.9782 mas, bmaj=1.689 mas, bpa=-2.701 degrees ! Estimated noise=2.12624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00623961 Jy ! Component: 100 - total flux cleaned = -0.00871097 Jy ! Component: 150 - total flux cleaned = -0.0109191 Jy ! Component: 200 - total flux cleaned = -0.0120593 Jy ! Total flux subtracted in 200 components = -0.0120593 Jy ! Clean residual min=-0.007593 max=0.007392 Jy/beam ! Clean residual mean=0.000006 rms=0.001676 Jy/beam ! Combined flux in latest and established models = 1.02624 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 140 components and 1.02624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192976Jy sigma=0.864789 ! Fit after self-cal, rms=0.192511Jy sigma=0.861386 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.094 mas, bmaj=1.531 mas, bpa=2.042 degrees ! Estimated noise=1.70138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103898 Jy ! Component: 100 - total flux cleaned = -0.00103416 Jy ! Component: 150 - total flux cleaned = -0.000781117 Jy ! Component: 200 - total flux cleaned = -0.000319803 Jy ! Component: 250 - total flux cleaned = -9.97981e-05 Jy ! Component: 300 - total flux cleaned = -0.000107442 Jy ! Component: 350 - total flux cleaned = 0.000100364 Jy ! Component: 400 - total flux cleaned = 0.000103137 Jy ! Total flux subtracted in 400 components = 0.000103137 Jy ! Clean residual min=-0.006434 max=0.005887 Jy/beam ! Clean residual mean=0.000111 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 1.02634 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 167 components and 1.02634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188038Jy sigma=0.856837 ! Fit after self-cal, rms=0.187465Jy sigma=0.856469 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224971 Jy ! Component: 100 - total flux cleaned = 0.000416466 Jy ! Component: 150 - total flux cleaned = 0.000599822 Jy ! Component: 200 - total flux cleaned = 0.000784055 Jy ! Component: 250 - total flux cleaned = 0.000954848 Jy ! Component: 300 - total flux cleaned = 0.000955082 Jy ! Component: 350 - total flux cleaned = 0.0012853 Jy ! Component: 400 - total flux cleaned = 0.00128114 Jy ! Total flux subtracted in 400 components = 0.00128114 Jy ! Clean residual min=-0.006135 max=0.005476 Jy/beam ! Clean residual mean=0.000091 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 1.02762 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 174 components and 1.02762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184707Jy sigma=0.853875 ! Fit after self-cal, rms=0.184426Jy sigma=0.853696 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 4. ! A total of 24 telescope corrections were flagged in sub-array 5. ! A total of 28 telescope corrections were flagged in sub-array 6. ! A total of 1 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.327259Jy sigma=1.347124 ! Fit after self-cal, rms=0.182646Jy sigma=0.852384 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.093 mas, bmaj=1.531 mas, bpa=2.184 degrees ! Estimated noise=1.69983 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00305985 Jy ! Component: 100 - total flux cleaned = -0.00357106 Jy ! Component: 150 - total flux cleaned = -0.00357528 Jy ! Component: 200 - total flux cleaned = -0.00372653 Jy ! Component: 250 - total flux cleaned = -0.00372803 Jy ! Component: 300 - total flux cleaned = -0.00358486 Jy ! Component: 350 - total flux cleaned = -0.0035837 Jy ! Component: 400 - total flux cleaned = -0.00357964 Jy ! Total flux subtracted in 400 components = -0.00357964 Jy ! Clean residual min=-0.005513 max=0.005038 Jy/beam ! Clean residual mean=0.000083 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 1.02404 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 183 components and 1.02404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180642Jy sigma=0.850234 ! Fit after self-cal, rms=0.180337Jy sigma=0.850058 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303105 Jy ! Component: 100 - total flux cleaned = 0.000436124 Jy ! Component: 150 - total flux cleaned = 0.00043396 Jy ! Component: 200 - total flux cleaned = 0.000556142 Jy ! Component: 250 - total flux cleaned = 0.000676757 Jy ! Component: 300 - total flux cleaned = 0.000793099 Jy ! Component: 350 - total flux cleaned = 0.00079315 Jy ! Component: 400 - total flux cleaned = 0.000788818 Jy ! Total flux subtracted in 400 components = 0.000788818 Jy ! Clean residual min=-0.005239 max=0.004881 Jy/beam ! Clean residual mean=0.000071 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 1.02483 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 189 components and 1.02483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179016Jy sigma=0.848857 ! Fit after self-cal, rms=0.178906Jy sigma=0.848758 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178906Jy sigma=0.848758 ! Fit after self-cal, rms=0.178206Jy sigma=0.848298 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.093 mas, bmaj=1.531 mas, bpa=2.254 degrees ! Estimated noise=1.69911 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181027 Jy ! Component: 100 - total flux cleaned = -0.00205002 Jy ! Component: 150 - total flux cleaned = -0.00216048 Jy ! Component: 200 - total flux cleaned = -0.00226569 Jy ! Component: 250 - total flux cleaned = -0.00236709 Jy ! Component: 300 - total flux cleaned = -0.00236993 Jy ! Component: 350 - total flux cleaned = -0.00246941 Jy ! Component: 400 - total flux cleaned = -0.0025653 Jy ! Total flux subtracted in 400 components = -0.0025653 Jy ! Clean residual min=-0.005023 max=0.004759 Jy/beam ! Clean residual mean=0.000067 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 1.02227 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 192 components and 1.02227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177205Jy sigma=0.847139 ! Fit after self-cal, rms=0.177098Jy sigma=0.847039 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322693 Jy ! Component: 100 - total flux cleaned = 0.000508488 Jy ! Component: 150 - total flux cleaned = 0.000420158 Jy ! Component: 200 - total flux cleaned = 0.000507274 Jy ! Component: 250 - total flux cleaned = 0.000589181 Jy ! Component: 300 - total flux cleaned = 0.000507759 Jy ! Component: 350 - total flux cleaned = 0.000508867 Jy ! Component: 400 - total flux cleaned = 0.000585531 Jy ! Total flux subtracted in 400 components = 0.000585531 Jy ! Clean residual min=-0.004918 max=0.004750 Jy/beam ! Clean residual mean=0.000058 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 1.02285 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 197 components and 1.02285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176426Jy sigma=0.846352 ! Fit after self-cal, rms=0.176390Jy sigma=0.846289 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176390Jy sigma=0.846289 ! Fit after self-cal, rms=0.173992Jy sigma=0.834396 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=2.158 mas, bmaj=5.333 mas, bpa=-17.29 degrees ! Estimated noise=1.77728 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000969686 Jy ! Component: 100 - total flux cleaned = -0.00131295 Jy ! Component: 150 - total flux cleaned = -0.00151296 Jy ! Component: 200 - total flux cleaned = -0.00171556 Jy ! Component: 250 - total flux cleaned = -0.00189631 Jy ! Component: 300 - total flux cleaned = -0.0020166 Jy ! Component: 350 - total flux cleaned = -0.00214876 Jy ! Component: 400 - total flux cleaned = -0.00218945 Jy ! Total flux subtracted in 400 components = -0.00218945 Jy ! Clean residual min=-0.004559 max=0.005223 Jy/beam ! Clean residual mean=0.000037 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 1.02066 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 220 components and 1.02066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173999Jy sigma=0.834121 ! Fit after self-cal, rms=0.174004Jy sigma=0.834072 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-43.4, -34.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352485 Jy ! Component: 100 - total flux cleaned = 0.00341027 Jy ! Component: 150 - total flux cleaned = 0.00331376 Jy ! Component: 200 - total flux cleaned = 0.00314549 Jy ! Component: 250 - total flux cleaned = 0.0029177 Jy ! Component: 300 - total flux cleaned = 0.0027792 Jy ! Component: 350 - total flux cleaned = 0.00264862 Jy ! Component: 400 - total flux cleaned = 0.00240306 Jy ! Total flux subtracted in 400 components = 0.00240306 Jy ! Clean residual min=-0.004221 max=0.004400 Jy/beam ! Clean residual mean=-0.000013 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 1.02306 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 283 components and 1.02306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173880Jy sigma=0.829772 ! Fit after self-cal, rms=0.173872Jy sigma=0.829500 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.093 mas, bmaj=1.532 mas, bpa=2.272 degrees ! Estimated noise=1.69887 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.093 x 1.532 at 2.272 degrees (North through East) ! Clean map min=-0.0075523 max=0.90902 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173872Jy sigma=0.829500 ! Fit after self-cal, rms=0.164019Jy sigma=0.749340 ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.092 mas, bmaj=1.531 mas, bpa=2.314 degrees ! Estimated noise=1.69807 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319537 Jy ! Component: 100 - total flux cleaned = -8.94819e-05 Jy ! Component: 150 - total flux cleaned = -8.95433e-05 Jy ! Component: 200 - total flux cleaned = -0.000204677 Jy ! Component: 250 - total flux cleaned = -0.000312339 Jy ! Component: 300 - total flux cleaned = -0.000419014 Jy ! Component: 350 - total flux cleaned = -0.000322858 Jy ! Component: 400 - total flux cleaned = -0.000511268 Jy ! Total flux subtracted in 400 components = -0.000511268 Jy ! Clean residual min=-0.004486 max=0.004294 Jy/beam ! Clean residual mean=0.000022 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 1.02255 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 337 components and 1.02255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163312Jy sigma=0.745300 ! Fit after self-cal, rms=0.163322Jy sigma=0.745141 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.43506e-06 Jy ! Component: 100 - total flux cleaned = -6.42343e-06 Jy ! Component: 150 - total flux cleaned = 0.000171283 Jy ! Component: 200 - total flux cleaned = 8.35589e-05 Jy ! Component: 250 - total flux cleaned = -8.33496e-05 Jy ! Component: 300 - total flux cleaned = -0.000163331 Jy ! Component: 350 - total flux cleaned = -0.000163572 Jy ! Component: 400 - total flux cleaned = -0.000163454 Jy ! Total flux subtracted in 400 components = -0.000163454 Jy ! Clean residual min=-0.004471 max=0.004077 Jy/beam ! Clean residual mean=0.000024 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 1.02239 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 365 components and 1.02239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162887Jy sigma=0.743185 ! Fit after self-cal, rms=0.162893Jy sigma=0.743123 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162893Jy sigma=0.743123 ! Fit after self-cal, rms=0.162776Jy sigma=0.742754 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=0.9759 mas, bmaj=1.672 mas, bpa=-2.184 degrees ! Estimated noise=2.12104 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.721665 Jy ! Component: 100 - total flux cleaned = 0.881521 Jy ! Component: 150 - total flux cleaned = 0.932644 Jy ! Component: 200 - total flux cleaned = 0.958122 Jy ! Component: 250 - total flux cleaned = 0.969433 Jy ! Component: 300 - total flux cleaned = 0.976419 Jy ! Component: 350 - total flux cleaned = 0.983584 Jy ! Component: 400 - total flux cleaned = 0.987566 Jy ! Total flux subtracted in 400 components = 0.987566 Jy ! Clean residual min=-0.007498 max=0.008965 Jy/beam ! Clean residual mean=0.000072 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 0.987566 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.987566 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.092 mas, bmaj=1.531 mas, bpa=2.321 degrees ! Estimated noise=1.69752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 2.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116421 Jy ! Component: 100 - total flux cleaned = 0.0186029 Jy ! Component: 150 - total flux cleaned = 0.0222506 Jy ! Component: 200 - total flux cleaned = 0.0237465 Jy ! Component: 250 - total flux cleaned = 0.0246682 Jy ! Component: 300 - total flux cleaned = 0.0259576 Jy ! Component: 350 - total flux cleaned = 0.0269624 Jy ! Component: 400 - total flux cleaned = 0.0277207 Jy ! Total flux subtracted in 400 components = 0.0277207 Jy ! Clean residual min=-0.005026 max=0.005037 Jy/beam ! Clean residual mean=0.000167 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 1.01529 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 98 components and 1.01529 Jy ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Added new window around map position (-21.8, -28.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140724 Jy ! Component: 100 - total flux cleaned = 0.00158249 Jy ! Component: 150 - total flux cleaned = 0.00175645 Jy ! Component: 200 - total flux cleaned = 0.00224958 Jy ! Component: 250 - total flux cleaned = 0.00240522 Jy ! Component: 300 - total flux cleaned = 0.00271119 Jy ! Component: 350 - total flux cleaned = 0.00285761 Jy ! Component: 400 - total flux cleaned = 0.00314146 Jy ! Total flux subtracted in 400 components = 0.00314146 Jy ! Clean residual min=-0.004462 max=0.004859 Jy/beam ! Clean residual mean=0.000111 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 1.01843 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 137 components and 1.01843 Jy ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Added new window around map position (36.4, -3.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035476 Jy ! Component: 100 - total flux cleaned = 0.00382705 Jy ! Component: 150 - total flux cleaned = 0.00436383 Jy ! Component: 200 - total flux cleaned = 0.00462606 Jy ! Component: 250 - total flux cleaned = 0.00462192 Jy ! Component: 300 - total flux cleaned = 0.00450025 Jy ! Component: 350 - total flux cleaned = 0.00486131 Jy ! Component: 400 - total flux cleaned = 0.00486169 Jy ! Total flux subtracted in 400 components = 0.00486169 Jy ! Clean residual min=-0.004578 max=0.004197 Jy/beam ! Clean residual mean=0.000053 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 1.02329 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 162 components and 1.02329 Jy ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=2.159 mas, bmaj=5.331 mas, bpa=-17.29 degrees ! Estimated noise=1.77566 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128687 Jy ! Component: 100 - total flux cleaned = 0.00185243 Jy ! Component: 150 - total flux cleaned = 0.00222533 Jy ! Component: 200 - total flux cleaned = 0.00243865 Jy ! Component: 250 - total flux cleaned = 0.00270407 Jy ! Component: 300 - total flux cleaned = 0.00270351 Jy ! Component: 350 - total flux cleaned = 0.00270263 Jy ! Component: 400 - total flux cleaned = 0.00264293 Jy ! Total flux subtracted in 400 components = 0.00264293 Jy ! Clean residual min=-0.003491 max=0.003577 Jy/beam ! Clean residual mean=0.000029 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 1.02593 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, 34). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274295 Jy ! Component: 100 - total flux cleaned = 0.000912247 Jy ! Component: 150 - total flux cleaned = 0.000908263 Jy ! Component: 200 - total flux cleaned = 0.000983612 Jy ! Component: 250 - total flux cleaned = 0.00105542 Jy ! Component: 300 - total flux cleaned = 0.00118626 Jy ! Component: 350 - total flux cleaned = 0.00131096 Jy ! Component: 400 - total flux cleaned = 0.00137103 Jy ! Total flux subtracted in 400 components = 0.00137103 Jy ! Clean residual min=-0.003239 max=0.003037 Jy/beam ! Clean residual mean=-0.000009 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 1.0273 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 312 components and 1.0273 Jy ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! Estimated beam: bmin=1.092 mas, bmaj=1.531 mas, bpa=2.321 degrees ! Estimated noise=1.69752 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047005 Jy ! Component: 100 - total flux cleaned = -0.000583628 Jy ! Component: 150 - total flux cleaned = -0.000697704 Jy ! Component: 200 - total flux cleaned = -0.00112857 Jy ! Component: 250 - total flux cleaned = -0.00133844 Jy ! Component: 300 - total flux cleaned = -0.00143842 Jy ! Component: 350 - total flux cleaned = -0.00133801 Jy ! Component: 400 - total flux cleaned = -0.00153284 Jy ! Total flux subtracted in 400 components = -0.00153284 Jy ! Clean residual min=-0.004418 max=0.003503 Jy/beam ! Clean residual mean=0.000010 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 1.02577 Jy selfcal ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 360 components and 1.02577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164119Jy sigma=0.740358 ! Fit after self-cal, rms=0.163868Jy sigma=0.738632 wmodel /scr/pima/rdv94_uvs/J0118-2141_X_map.mod ! Writing 360 model components to file: /scr/pima/rdv94_uvs/J0118-2141_X_map.mod wobs /scr/pima/rdv94_uvs/J0118-2141_X_uvs.fits ! Applying 2316 buffered edits. ! Writing UV FITS file: /scr/pima/rdv94_uvs/J0118-2141_X_uvs.fits wwins /scr/pima/rdv94_uvs/J0118-2141_X_map.win ! wwins: Wrote 7 windows to /scr/pima/rdv94_uvs/J0118-2141_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109069 Jy ! Component: 100 - total flux cleaned = -0.0012208 Jy ! Component: 150 - total flux cleaned = -0.00128354 Jy ! Component: 200 - total flux cleaned = -0.00128514 Jy ! Component: 250 - total flux cleaned = -0.00134361 Jy ! Component: 300 - total flux cleaned = -0.00134439 Jy ! Component: 350 - total flux cleaned = -0.00145739 Jy ! Component: 400 - total flux cleaned = -0.00151196 Jy ! Component: 450 - total flux cleaned = -0.00145737 Jy ! Component: 500 - total flux cleaned = -0.00145721 Jy ! Component: 550 - total flux cleaned = -0.00161531 Jy ! Component: 600 - total flux cleaned = -0.00177077 Jy ! Component: 650 - total flux cleaned = -0.0019252 Jy ! Component: 700 - total flux cleaned = -0.00202631 Jy ! Component: 750 - total flux cleaned = -0.00227643 Jy ! Component: 800 - total flux cleaned = -0.00237444 Jy ! Component: 850 - total flux cleaned = -0.00242309 Jy ! Component: 900 - total flux cleaned = -0.00247155 Jy ! Component: 950 - total flux cleaned = -0.00252 Jy ! Component: 1000 - total flux cleaned = -0.00270913 Jy ! Component: 1050 - total flux cleaned = -0.00275581 Jy ! Component: 1100 - total flux cleaned = -0.00275559 Jy ! Component: 1150 - total flux cleaned = -0.00284673 Jy ! Component: 1200 - total flux cleaned = -0.0027562 Jy ! Component: 1250 - total flux cleaned = -0.00284592 Jy ! Component: 1300 - total flux cleaned = -0.0028013 Jy ! Component: 1350 - total flux cleaned = -0.00275721 Jy ! Component: 1400 - total flux cleaned = -0.00280127 Jy ! Component: 1450 - total flux cleaned = -0.00288765 Jy ! Component: 1500 - total flux cleaned = -0.00284426 Jy ! Component: 1550 - total flux cleaned = -0.00280164 Jy ! Component: 1600 - total flux cleaned = -0.00275947 Jy ! Component: 1650 - total flux cleaned = -0.00263382 Jy ! Component: 1700 - total flux cleaned = -0.00271693 Jy ! Component: 1750 - total flux cleaned = -0.00271666 Jy ! Component: 1800 - total flux cleaned = -0.00263465 Jy ! Component: 1850 - total flux cleaned = -0.00259401 Jy ! Component: 1900 - total flux cleaned = -0.00259423 Jy ! Component: 1950 - total flux cleaned = -0.0025945 Jy ! Component: 2000 - total flux cleaned = -0.00255475 Jy ! Component: 2050 - total flux cleaned = -0.00255494 Jy ! Component: 2100 - total flux cleaned = -0.00255496 Jy ! Component: 2150 - total flux cleaned = -0.00243768 Jy ! Component: 2200 - total flux cleaned = -0.0024378 Jy ! Component: 2250 - total flux cleaned = -0.00236066 Jy ! Component: 2300 - total flux cleaned = -0.00236101 Jy ! Component: 2350 - total flux cleaned = -0.0022848 Jy ! Component: 2400 - total flux cleaned = -0.00232249 Jy ! Component: 2450 - total flux cleaned = -0.00228433 Jy ! Component: 2500 - total flux cleaned = -0.00217151 Jy ! Component: 2550 - total flux cleaned = -0.00209688 Jy ! Component: 2600 - total flux cleaned = -0.00213405 Jy ! Component: 2650 - total flux cleaned = -0.00206021 Jy ! Component: 2700 - total flux cleaned = -0.00213355 Jy ! Component: 2750 - total flux cleaned = -0.00202381 Jy ! Component: 2800 - total flux cleaned = -0.00184225 Jy ! Component: 2850 - total flux cleaned = -0.00191483 Jy ! Component: 2900 - total flux cleaned = -0.00187896 Jy ! Component: 2950 - total flux cleaned = -0.00191451 Jy ! Component: 3000 - total flux cleaned = -0.00191445 Jy ! Component: 3050 - total flux cleaned = -0.00184318 Jy ! Component: 3100 - total flux cleaned = -0.00184321 Jy ! Component: 3150 - total flux cleaned = -0.00177289 Jy ! Component: 3200 - total flux cleaned = -0.00180779 Jy ! Component: 3250 - total flux cleaned = -0.00173813 Jy ! Component: 3300 - total flux cleaned = -0.0018074 Jy ! Component: 3350 - total flux cleaned = -0.00160037 Jy ! Component: 3400 - total flux cleaned = -0.00166893 Jy ! Component: 3450 - total flux cleaned = -0.00160058 Jy ! Component: 3500 - total flux cleaned = -0.00156655 Jy ! Component: 3550 - total flux cleaned = -0.00149866 Jy ! Component: 3600 - total flux cleaned = -0.0014987 Jy ! Component: 3650 - total flux cleaned = -0.00143152 Jy ! Component: 3700 - total flux cleaned = -0.00136467 Jy ! Component: 3750 - total flux cleaned = -0.0014313 Jy ! Component: 3800 - total flux cleaned = -0.00136496 Jy ! Component: 3850 - total flux cleaned = -0.00129903 Jy ! Component: 3900 - total flux cleaned = -0.00126632 Jy ! Component: 3950 - total flux cleaned = -0.00136437 Jy ! Component: 4000 - total flux cleaned = -0.00123396 Jy ! Component: 4050 - total flux cleaned = -0.00126625 Jy ! Total flux subtracted in 4096 components = -0.00116921 Jy ! Clean residual min=-0.001932 max=0.001911 Jy/beam ! Clean residual mean=0.000034 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 1.0246 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 597 components and 1.0246 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv94_uvs/J0118-2141_X\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.092 x 1.531 at 2.321 degrees (North through East) ! Clean map min=-0.0059994 max=0.9104 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0118-2141_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map ! Your choice of large map pixels excluded 5.87% of the data. ! The x-axis pixel size should ideally be below 0.1652 milli-arcsec float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.9104 rms= 0.00054 Jy quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J0118-2141_X_uvs.log closed on Tue Oct 8 12:09:49 2013