! Started logfile: /scr/pima/rdv93_uvs/J2134-0153_S_uvs.log on Tue Oct 8 15:34:00 2013 obs /scr/pima/rdv93_uvs/J2134-0153_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J2134-0153_S_uva.fits ! AN table 1: 3 integrations on 3 of 3 possible baselines. ! AN table 2: 3 integrations on 1 of 1 possible baselines. ! AN table 3: 11 integrations on 1 of 1 possible baselines. ! AN table 4: 3 integrations on 3 of 3 possible baselines. ! AN table 5: 3 integrations on 10 of 10 possible baselines. ! AN table 6: 3 integrations on 6 of 6 possible baselines. ! AN table 7: 3 integrations on 15 of 15 possible baselines. ! AN table 8: 3 integrations on 36 of 36 possible baselines. ! AN table 9: 2 integrations on 1 of 1 possible baselines. ! AN table 10: 3 integrations on 55 of 55 possible baselines. ! AN table 11: 3 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.95599 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1564 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv93_uvs/J2134-0153_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 ! 8:WZ self-cal status=correctable weight=1 ! 9:FT self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 10:BR self-cal status=correctable weight=1 ! 10:FD self-cal status=correctable weight=1 ! 10:FT self-cal status=correctable weight=1 ! 10:HN self-cal status=correctable weight=1 ! 10:KP self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:MK self-cal status=correctable weight=1 ! 10:NL self-cal status=correctable weight=1 ! 10:OV self-cal status=correctable weight=1 ! 10:PT self-cal status=correctable weight=1 ! 10:SC self-cal status=correctable weight=1 ! 11:BR self-cal status=correctable weight=1 ! 11:MK self-cal status=correctable weight=1 ! 11:OV self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.552892Jy sigma=41.713748 ! Fit after self-cal, rms=0.506954Jy sigma=11.311086 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:FT ! Flagging baselines of antenna 4:FT in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:FT ! Flagging baselines of antenna 5:FT in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:FT ! Flagging baselines of antenna 7:FT in the currently selected channels. flag 7:NY ! Flagging baselines of antenna 7:NY in the currently selected channels. flag 7:WZ ! Flagging baselines of antenna 7:WZ in the currently selected channels. flag 8:FT ! Flagging baselines of antenna 8:FT in the currently selected channels. flag 8:WZ ! Flagging baselines of antenna 8:WZ in the currently selected channels. flag 9:FT ! Flagging baselines of antenna 9:FT in the currently selected channels. flag 10:FT ! Flagging baselines of antenna 10:FT in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=7.336 mas, bpa=-6.808 degrees ! Estimated noise=1.08065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00719 Jy ! Component: 100 - total flux cleaned = 1.30205 Jy ! Total flux subtracted in 100 components = 1.30205 Jy ! Clean residual min=-0.042928 max=0.119339 Jy/beam ! Clean residual mean=0.000304 rms=0.014216 Jy/beam ! Combined flux in latest and established models = 1.30205 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.30205 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 6 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.265865Jy sigma=7.097581 ! Fit after self-cal, rms=0.265834Jy sigma=7.144511 ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=7.441 mas, bpa=-6.354 degrees ! Estimated noise=1.08156 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122093 Jy ! Component: 100 - total flux cleaned = 0.17429 Jy ! Total flux subtracted in 100 components = 0.17429 Jy ! Clean residual min=-0.030657 max=0.044316 Jy/beam ! Clean residual mean=0.000081 rms=0.008609 Jy/beam ! Combined flux in latest and established models = 1.47634 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 13 components and 1.47634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203791Jy sigma=5.438041 ! Fit after self-cal, rms=0.203884Jy sigma=5.437720 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.426 mas, bmaj=8.269 mas, bpa=-6.37 degrees ! Estimated noise=0.913149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028064 Jy ! Component: 100 - total flux cleaned = 0.0410071 Jy ! Component: 150 - total flux cleaned = 0.0436215 Jy ! Component: 200 - total flux cleaned = 0.0455506 Jy ! Total flux subtracted in 200 components = 0.0455506 Jy ! Clean residual min=-0.030042 max=0.050474 Jy/beam ! Clean residual mean=0.000094 rms=0.009028 Jy/beam ! Combined flux in latest and established models = 1.52189 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 1.52189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198133Jy sigma=5.324186 ! Fit after self-cal, rms=0.198191Jy sigma=5.323996 ! Inverting map ! Added new window around map position (16.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443005 Jy ! Component: 100 - total flux cleaned = 0.0608438 Jy ! Component: 150 - total flux cleaned = 0.0683703 Jy ! Component: 200 - total flux cleaned = 0.0722905 Jy ! Total flux subtracted in 200 components = 0.0722905 Jy ! Clean residual min=-0.025575 max=0.027647 Jy/beam ! Clean residual mean=-0.000015 rms=0.006978 Jy/beam ! Combined flux in latest and established models = 1.59418 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 1.59418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185906Jy sigma=4.991298 ! Fit after self-cal, rms=0.185419Jy sigma=4.976335 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.99 FT 1.00* HN 0.95 KP 1.03 ! LA 1.16 NL 0.96 PT 1.04 SC 0.92 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FT 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! BR 0.95 FD 1.00 FT 1.00* HN 0.95 ! KP 1.05 LA 1.10 MK 0.92 NL 0.98 ! OV 0.98 PT 1.05 SC 0.98 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 0.00* MK 0.00* OV 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.06 FT 1.00* HN 1.07 KP 1.02 ! LA 1.06 NL 1.00 PT 1.03 SC 1.03 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FT 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! BR 1.01 FD 1.06 FT 1.00* HN 1.06 ! KP 1.03 LA 1.01 MK 1.06 NL 1.03 ! OV 1.02 PT 1.05 SC 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 0.00* MK 0.00* OV 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.08 FT 1.00* HN 0.97 KP 0.92 ! LA 0.99 NL 1.09 PT 1.07 SC 0.94 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FT 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! BR 1.03 FD 1.09 FT 1.00* HN 0.98 ! KP 0.92 LA 0.98 MK 1.06 NL 1.09 ! OV 1.02 PT 1.08 SC 0.94 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 0.00* MK 0.00* OV 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! A total of 9 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.05 FT 1.00* HN 0.92 KP 0.85 ! LA 0.82 NL 0.98 PT 0.95 SC 0.98 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 9: ! FT 0.00* MK 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! BR 1.22 FD 1.05 FT 1.00* HN 0.95 ! KP 0.85 LA 0.80 MK 1.15 NL 1.01 ! OV 0.87 PT 0.95 SC 1.00 ! ! A total of 9 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 0.00* MK 0.00* OV 0.00* ! ! ! Fit before self-cal, rms=0.185419Jy sigma=4.976335 ! Fit after self-cal, rms=0.110974Jy sigma=1.767973 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.325 mas, bmaj=8.823 mas, bpa=-4.06 degrees ! Estimated noise=0.94706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160423 Jy ! Component: 100 - total flux cleaned = 0.0195067 Jy ! Component: 150 - total flux cleaned = 0.0214102 Jy ! Component: 200 - total flux cleaned = 0.022135 Jy ! Total flux subtracted in 200 components = 0.022135 Jy ! Clean residual min=-0.010421 max=0.010485 Jy/beam ! Clean residual mean=-0.000022 rms=0.002642 Jy/beam ! Combined flux in latest and established models = 1.61631 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 1.61631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106265Jy sigma=1.640687 ! Fit after self-cal, rms=0.106084Jy sigma=1.628225 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106084Jy sigma=1.628225 ! Fit after self-cal, rms=0.105857Jy sigma=1.612517 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.324 mas, bmaj=8.823 mas, bpa=-4.111 degrees ! Estimated noise=0.946751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716756 Jy ! Component: 100 - total flux cleaned = 0.00864247 Jy ! Component: 150 - total flux cleaned = 0.00908768 Jy ! Component: 200 - total flux cleaned = 0.00929599 Jy ! Total flux subtracted in 200 components = 0.00929599 Jy ! Clean residual min=-0.009250 max=0.009007 Jy/beam ! Clean residual mean=-0.000007 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 1.62561 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 90 components and 1.62561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102926Jy sigma=1.570189 ! Fit after self-cal, rms=0.102894Jy sigma=1.567404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021369 Jy ! Component: 100 - total flux cleaned = 0.00254042 Jy ! Component: 150 - total flux cleaned = 0.00273507 Jy ! Component: 200 - total flux cleaned = 0.00311706 Jy ! Total flux subtracted in 200 components = 0.00311706 Jy ! Clean residual min=-0.008642 max=0.008246 Jy/beam ! Clean residual mean=-0.000012 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 1.62873 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 1.62873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100456Jy sigma=1.552083 ! Fit after self-cal, rms=0.100491Jy sigma=1.551636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100491Jy sigma=1.551636 ! Fit after self-cal, rms=0.100300Jy sigma=1.543975 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.322 mas, bmaj=8.822 mas, bpa=-4.121 degrees ! Estimated noise=0.946314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277256 Jy ! Component: 100 - total flux cleaned = 0.00353443 Jy ! Component: 150 - total flux cleaned = 0.00353192 Jy ! Component: 200 - total flux cleaned = 0.00388268 Jy ! Total flux subtracted in 200 components = 0.00388268 Jy ! Clean residual min=-0.008093 max=0.007735 Jy/beam ! Clean residual mean=0.000003 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 1.63261 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 100 components and 1.63261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098142Jy sigma=1.526589 ! Fit after self-cal, rms=0.098149Jy sigma=1.525828 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112526 Jy ! Component: 100 - total flux cleaned = 0.00145926 Jy ! Component: 150 - total flux cleaned = 0.00162286 Jy ! Component: 200 - total flux cleaned = 0.00194132 Jy ! Total flux subtracted in 200 components = 0.00194132 Jy ! Clean residual min=-0.007891 max=0.007888 Jy/beam ! Clean residual mean=-0.000000 rms=0.001973 Jy/beam ! Combined flux in latest and established models = 1.63455 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 1.63455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096185Jy sigma=1.516772 ! Fit after self-cal, rms=0.096216Jy sigma=1.516548 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096216Jy sigma=1.516548 ! Fit after self-cal, rms=0.096055Jy sigma=1.514291 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.17 mas, bmaj=12.23 mas, bpa=-4.302 degrees ! Estimated noise=0.991633 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496879 Jy ! Component: 100 - total flux cleaned = 0.00606959 Jy ! Component: 150 - total flux cleaned = 0.00663037 Jy ! Component: 200 - total flux cleaned = 0.00686447 Jy ! Total flux subtracted in 200 components = 0.00686447 Jy ! Clean residual min=-0.006884 max=0.007473 Jy/beam ! Clean residual mean=-0.000003 rms=0.002150 Jy/beam ! Combined flux in latest and established models = 1.64141 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 130 components and 1.64141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095979Jy sigma=1.502760 ! Fit after self-cal, rms=0.095886Jy sigma=1.500084 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102578 Jy ! Component: 100 - total flux cleaned = 0.0015355 Jy ! Component: 150 - total flux cleaned = 0.00166097 Jy ! Component: 200 - total flux cleaned = 0.00166001 Jy ! Total flux subtracted in 200 components = 0.00166001 Jy ! Clean residual min=-0.006716 max=0.007248 Jy/beam ! Clean residual mean=-0.000008 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 1.64307 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 1.64307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095925Jy sigma=1.496849 ! Fit after self-cal, rms=0.095868Jy sigma=1.495515 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 8:SC,true ! 8:SC self-cal status=fixed weight=1 selfant 9:MK,true ! 9:MK self-cal status=fixed weight=1 selfant 10:BR,true ! 10:BR self-cal status=fixed weight=1 selfant 10:FD,true ! 10:FD self-cal status=fixed weight=1 selfant 10:HN,true ! 10:HN self-cal status=fixed weight=1 selfant 10:KP,true ! 10:KP self-cal status=fixed weight=1 selfant 10:LA,true ! 10:LA self-cal status=fixed weight=1 selfant 10:MK,true ! 10:MK self-cal status=fixed weight=1 selfant 10:NL,true ! 10:NL self-cal status=fixed weight=1 selfant 10:OV,true ! 10:OV self-cal status=fixed weight=1 selfant 10:PT,true ! 10:PT self-cal status=fixed weight=1 selfant 10:SC,true ! 10:SC self-cal status=fixed weight=1 selfant 11:BR,true ! 11:BR self-cal status=fixed weight=1 selfant 11:MK,true ! 11:MK self-cal status=fixed weight=1 selfant 11:OV,true ! 11:OV self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.235933Jy sigma=2.492005 ! Fit after self-cal, rms=0.171583Jy sigma=1.643831 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:NY self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 7:WZ self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:FT self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 8:SC self-cal status=correctable weight=1 ! 8:WZ self-cal status=correctable weight=1 ! 9:FT self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 10:BR self-cal status=correctable weight=1 ! 10:FD self-cal status=correctable weight=1 ! 10:FT self-cal status=correctable weight=1 ! 10:HN self-cal status=correctable weight=1 ! 10:KP self-cal status=correctable weight=1 ! 10:LA self-cal status=correctable weight=1 ! 10:MK self-cal status=correctable weight=1 ! 10:NL self-cal status=correctable weight=1 ! 10:OV self-cal status=correctable weight=1 ! 10:PT self-cal status=correctable weight=1 ! 10:SC self-cal status=correctable weight=1 ! 11:BR self-cal status=correctable weight=1 ! 11:MK self-cal status=correctable weight=1 ! 11:OV self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 2 telescope corrections were flagged in sub-array 9. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=0.171583Jy sigma=1.643831 ! Fit after self-cal, rms=0.165504Jy sigma=1.387935 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=7.12 mas, bpa=-10.86 degrees ! Estimated noise=1.27683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305521 Jy ! Component: 100 - total flux cleaned = 0.0035815 Jy ! Component: 150 - total flux cleaned = 0.00312446 Jy ! Component: 200 - total flux cleaned = 0.00186808 Jy ! Total flux subtracted in 200 components = 0.00186808 Jy ! Clean residual min=-0.008546 max=0.009767 Jy/beam ! Clean residual mean=0.000003 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 1.64494 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 149 components and 1.64494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153857Jy sigma=1.374197 ! Fit after self-cal, rms=0.154082Jy sigma=1.373822 ! Inverting map ! Added new window around map position (4.8, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168629 Jy ! Component: 100 - total flux cleaned = 0.00132073 Jy ! Component: 150 - total flux cleaned = 0.000974551 Jy ! Component: 200 - total flux cleaned = 0.000308764 Jy ! Total flux subtracted in 200 components = 0.000308764 Jy ! Clean residual min=-0.008388 max=0.007386 Jy/beam ! Clean residual mean=0.000002 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 1.64525 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 153 components and 1.64525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146950Jy sigma=1.360459 ! Fit after self-cal, rms=0.147002Jy sigma=1.359519 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=7.927 mas, bpa=-10.62 degrees ! Estimated noise=1.0055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141564 Jy ! Component: 100 - total flux cleaned = 0.00121918 Jy ! Component: 150 - total flux cleaned = 0.00121607 Jy ! Component: 200 - total flux cleaned = 0.00121524 Jy ! Component: 250 - total flux cleaned = 0.0010348 Jy ! Component: 300 - total flux cleaned = 0.00103446 Jy ! Component: 350 - total flux cleaned = 0.00103197 Jy ! Component: 400 - total flux cleaned = 0.000855191 Jy ! Total flux subtracted in 400 components = 0.000855191 Jy ! Clean residual min=-0.007221 max=0.006473 Jy/beam ! Clean residual mean=0.000005 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 1.64611 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 171 components and 1.64611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140734Jy sigma=1.346882 ! Fit after self-cal, rms=0.140860Jy sigma=1.346290 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356423 Jy ! Component: 100 - total flux cleaned = 0.000353441 Jy ! Component: 150 - total flux cleaned = 0.000352174 Jy ! Component: 200 - total flux cleaned = 0.000348523 Jy ! Component: 250 - total flux cleaned = 0.000192495 Jy ! Component: 300 - total flux cleaned = 0.000188496 Jy ! Component: 350 - total flux cleaned = 2.93563e-05 Jy ! Component: 400 - total flux cleaned = 2.71925e-05 Jy ! Total flux subtracted in 400 components = 2.71925e-05 Jy ! Clean residual min=-0.006925 max=0.006491 Jy/beam ! Clean residual mean=0.000004 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 1.64613 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 179 components and 1.64613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135620Jy sigma=1.339236 ! Fit after self-cal, rms=0.135687Jy sigma=1.339003 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 8. ! A total of 4 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! A total of 9 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=0.208691Jy sigma=2.310307 ! Fit after self-cal, rms=0.128805Jy sigma=1.333978 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=7.915 mas, bpa=-10.72 degrees ! Estimated noise=1.0029 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407309 Jy ! Component: 100 - total flux cleaned = 0.00133687 Jy ! Component: 150 - total flux cleaned = 0.00185232 Jy ! Component: 200 - total flux cleaned = 0.00217708 Jy ! Component: 250 - total flux cleaned = 0.00217227 Jy ! Component: 300 - total flux cleaned = 0.00232761 Jy ! Component: 350 - total flux cleaned = 0.0023248 Jy ! Component: 400 - total flux cleaned = 0.00232141 Jy ! Total flux subtracted in 400 components = 0.00232141 Jy ! Clean residual min=-0.006350 max=0.006089 Jy/beam ! Clean residual mean=0.000004 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 1.64845 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 185 components and 1.64845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122903Jy sigma=1.327681 ! Fit after self-cal, rms=0.122933Jy sigma=1.327564 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297056 Jy ! Component: 100 - total flux cleaned = 0.000290487 Jy ! Component: 150 - total flux cleaned = 0.000296524 Jy ! Component: 200 - total flux cleaned = 0.000289294 Jy ! Component: 250 - total flux cleaned = 0.000419349 Jy ! Component: 300 - total flux cleaned = 0.00041586 Jy ! Component: 350 - total flux cleaned = 0.000283418 Jy ! Component: 400 - total flux cleaned = 0.000284478 Jy ! Total flux subtracted in 400 components = 0.000284478 Jy ! Clean residual min=-0.006277 max=0.006033 Jy/beam ! Clean residual mean=0.000003 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 1.64874 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 195 components and 1.64874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118622Jy sigma=1.322938 ! Fit after self-cal, rms=0.118633Jy sigma=1.322821 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118633Jy sigma=1.322821 ! Fit after self-cal, rms=0.116655Jy sigma=1.321846 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=7.911 mas, bpa=-10.74 degrees ! Estimated noise=1.00171 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922987 Jy ! Component: 100 - total flux cleaned = 0.00148994 Jy ! Component: 150 - total flux cleaned = 0.00148411 Jy ! Component: 200 - total flux cleaned = 0.00162067 Jy ! Component: 250 - total flux cleaned = 0.00162552 Jy ! Component: 300 - total flux cleaned = 0.00162955 Jy ! Component: 350 - total flux cleaned = 0.00163122 Jy ! Component: 400 - total flux cleaned = 0.0016374 Jy ! Total flux subtracted in 400 components = 0.0016374 Jy ! Clean residual min=-0.006090 max=0.006025 Jy/beam ! Clean residual mean=0.000004 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 1.65038 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 204 components and 1.65038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112640Jy sigma=1.317698 ! Fit after self-cal, rms=0.112645Jy sigma=1.317577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387523 Jy ! Component: 100 - total flux cleaned = 0.000270654 Jy ! Component: 150 - total flux cleaned = 0.000276384 Jy ! Component: 200 - total flux cleaned = 0.000279984 Jy ! Component: 250 - total flux cleaned = 0.000162728 Jy ! Component: 300 - total flux cleaned = 0.000160989 Jy ! Component: 350 - total flux cleaned = 0.000156281 Jy ! Component: 400 - total flux cleaned = 4.25197e-05 Jy ! Total flux subtracted in 400 components = 4.25197e-05 Jy ! Clean residual min=-0.006006 max=0.005955 Jy/beam ! Clean residual mean=0.000004 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 1.65042 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 214 components and 1.65042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109453Jy sigma=1.314196 ! Fit after self-cal, rms=0.109458Jy sigma=1.314100 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109458Jy sigma=1.314100 ! Fit after self-cal, rms=0.108325Jy sigma=1.301485 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.233 mas, bmaj=11.06 mas, bpa=-6.327 degrees ! Estimated noise=0.980269 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501771 Jy ! Component: 100 - total flux cleaned = 0.00118176 Jy ! Component: 150 - total flux cleaned = 0.00156576 Jy ! Component: 200 - total flux cleaned = 0.00163805 Jy ! Component: 250 - total flux cleaned = 0.00167081 Jy ! Component: 300 - total flux cleaned = 0.00167036 Jy ! Component: 350 - total flux cleaned = 0.00167041 Jy ! Component: 400 - total flux cleaned = 0.00167053 Jy ! Total flux subtracted in 400 components = 0.00167053 Jy ! Clean residual min=-0.005872 max=0.006715 Jy/beam ! Clean residual mean=0.000007 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 1.65209 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 241 components and 1.65209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108237Jy sigma=1.298725 ! Fit after self-cal, rms=0.108244Jy sigma=1.298428 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39.6, -1.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463254 Jy ! Component: 100 - total flux cleaned = 0.00462765 Jy ! Component: 150 - total flux cleaned = 0.0039628 Jy ! Component: 200 - total flux cleaned = 0.003508 Jy ! Component: 250 - total flux cleaned = 0.00291312 Jy ! Component: 300 - total flux cleaned = 0.00273138 Jy ! Component: 350 - total flux cleaned = 0.00248374 Jy ! Component: 400 - total flux cleaned = 0.0024872 Jy ! Total flux subtracted in 400 components = 0.0024872 Jy ! Clean residual min=-0.004566 max=0.004248 Jy/beam ! Clean residual mean=0.000003 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 1.65458 Jy ! Performing phase self-cal ! Adding 100 model components to the UV plane model. ! The established model now contains 341 components and 1.65458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107937Jy sigma=1.273098 ! Fit after self-cal, rms=0.107916Jy sigma=1.272282 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=7.909 mas, bpa=-10.72 degrees ! Estimated noise=1.00112 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.799 x 7.909 at -10.72 degrees (North through East) ! Clean map min=-0.0041794 max=1.2509 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107916Jy sigma=1.272282 ! Fit after self-cal, rms=0.099940Jy sigma=1.128919 ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=7.91 mas, bpa=-10.74 degrees ! Estimated noise=1.00127 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000794693 Jy ! Component: 100 - total flux cleaned = -0.000527255 Jy ! Component: 150 - total flux cleaned = -0.000276886 Jy ! Component: 200 - total flux cleaned = -0.000156824 Jy ! Component: 250 - total flux cleaned = -4.2251e-05 Jy ! Component: 300 - total flux cleaned = -4.30141e-05 Jy ! Component: 350 - total flux cleaned = -4.37689e-05 Jy ! Component: 400 - total flux cleaned = -0.000151769 Jy ! Total flux subtracted in 400 components = -0.000151769 Jy ! Clean residual min=-0.004248 max=0.004628 Jy/beam ! Clean residual mean=0.000003 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 1.65442 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 380 components and 1.65442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097346Jy sigma=1.119127 ! Fit after self-cal, rms=0.097348Jy sigma=1.118874 ! Inverting map ! Added new window around map position (-5.2, -35.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314959 Jy ! Component: 100 - total flux cleaned = 0.00453141 Jy ! Component: 150 - total flux cleaned = 0.00534654 Jy ! Component: 200 - total flux cleaned = 0.00557417 Jy ! Component: 250 - total flux cleaned = 0.00557863 Jy ! Component: 300 - total flux cleaned = 0.00557613 Jy ! Component: 350 - total flux cleaned = 0.00568134 Jy ! Component: 400 - total flux cleaned = 0.00546844 Jy ! Total flux subtracted in 400 components = 0.00546844 Jy ! Clean residual min=-0.003650 max=0.004335 Jy/beam ! Clean residual mean=0.000001 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 1.65989 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 413 components and 1.65989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094725Jy sigma=1.109183 ! Fit after self-cal, rms=0.094719Jy sigma=1.109052 ! Inverting map ! Added new window around map position (67.2, 55.6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243816 Jy ! Component: 100 - total flux cleaned = 0.00230021 Jy ! Component: 150 - total flux cleaned = 0.00146533 Jy ! Component: 200 - total flux cleaned = 0.00101719 Jy ! Component: 250 - total flux cleaned = 0.000799449 Jy ! Component: 300 - total flux cleaned = 0.000588813 Jy ! Component: 350 - total flux cleaned = 0.00058599 Jy ! Component: 400 - total flux cleaned = 0.000584323 Jy ! Total flux subtracted in 400 components = 0.000584323 Jy ! Clean residual min=-0.003497 max=0.003525 Jy/beam ! Clean residual mean=0.000002 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 1.66048 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 462 components and 1.66048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092435Jy sigma=1.096207 ! Fit after self-cal, rms=0.092409Jy sigma=1.095942 ! Inverting map ! Added new window around map position (41.6, 56). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000712765 Jy ! Component: 100 - total flux cleaned = -0.00130576 Jy ! Component: 150 - total flux cleaned = -0.00131066 Jy ! Component: 200 - total flux cleaned = -0.00110686 Jy ! Component: 250 - total flux cleaned = -0.00110666 Jy ! Component: 300 - total flux cleaned = -0.000910835 Jy ! Component: 350 - total flux cleaned = -0.000913003 Jy ! Component: 400 - total flux cleaned = -0.0010089 Jy ! Total flux subtracted in 400 components = -0.0010089 Jy ! Clean residual min=-0.003394 max=0.003308 Jy/beam ! Clean residual mean=0.000002 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 1.65947 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 504 components and 1.65947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090156Jy sigma=1.086888 ! Fit after self-cal, rms=0.090139Jy sigma=1.086581 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090139Jy sigma=1.086581 ! Fit after self-cal, rms=0.089589Jy sigma=1.085275 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.298 mas, bmaj=7.11 mas, bpa=-11.01 degrees ! Estimated noise=1.26767 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.972308 Jy ! Component: 100 - total flux cleaned = 1.28472 Jy ! Component: 150 - total flux cleaned = 1.41452 Jy ! Component: 200 - total flux cleaned = 1.47382 Jy ! Component: 250 - total flux cleaned = 1.51123 Jy ! Component: 300 - total flux cleaned = 1.5382 Jy ! Component: 350 - total flux cleaned = 1.55914 Jy ! Component: 400 - total flux cleaned = 1.57628 Jy ! Total flux subtracted in 400 components = 1.57628 Jy ! Clean residual min=-0.011758 max=0.011679 Jy/beam ! Clean residual mean=0.000078 rms=0.002763 Jy/beam ! Combined flux in latest and established models = 1.57628 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 1.57628 Jy ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.911 mas, bpa=-10.74 degrees ! Estimated noise=1.00095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189139 Jy ! Component: 100 - total flux cleaned = 0.0331106 Jy ! Component: 150 - total flux cleaned = 0.0434991 Jy ! Component: 200 - total flux cleaned = 0.0505821 Jy ! Component: 250 - total flux cleaned = 0.0554876 Jy ! Component: 300 - total flux cleaned = 0.0587108 Jy ! Component: 350 - total flux cleaned = 0.0600456 Jy ! Component: 400 - total flux cleaned = 0.0615459 Jy ! Total flux subtracted in 400 components = 0.0615459 Jy ! Clean residual min=-0.006002 max=0.005645 Jy/beam ! Clean residual mean=0.000024 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 1.63783 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 144 components and 1.63783 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.233 mas, bmaj=11.06 mas, bpa=-6.312 degrees ! Estimated noise=0.980272 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762324 Jy ! Component: 100 - total flux cleaned = 0.0113326 Jy ! Component: 150 - total flux cleaned = 0.0133215 Jy ! Component: 200 - total flux cleaned = 0.0145624 Jy ! Component: 250 - total flux cleaned = 0.0149826 Jy ! Component: 300 - total flux cleaned = 0.0156334 Jy ! Component: 350 - total flux cleaned = 0.0159897 Jy ! Component: 400 - total flux cleaned = 0.0162173 Jy ! Total flux subtracted in 400 components = 0.0162173 Jy ! Clean residual min=-0.004482 max=0.003895 Jy/beam ! Clean residual mean=0.000010 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 1.65404 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325714 Jy ! Component: 100 - total flux cleaned = 0.000528952 Jy ! Component: 150 - total flux cleaned = 0.000912716 Jy ! Component: 200 - total flux cleaned = 0.00109523 Jy ! Component: 250 - total flux cleaned = 0.00135874 Jy ! Component: 300 - total flux cleaned = 0.00160713 Jy ! Component: 350 - total flux cleaned = 0.00176759 Jy ! Component: 400 - total flux cleaned = 0.00192268 Jy ! Total flux subtracted in 400 components = 0.00192268 Jy ! Clean residual min=-0.003974 max=0.003604 Jy/beam ! Clean residual mean=0.000009 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 1.65597 Jy ! Adding 218 model components to the UV plane model. ! The established model now contains 346 components and 1.65597 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.911 mas, bpa=-10.74 degrees ! Estimated noise=1.00095 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024601 Jy ! Component: 100 - total flux cleaned = -0.000260058 Jy ! Component: 150 - total flux cleaned = -0.00026325 Jy ! Component: 200 - total flux cleaned = -0.000254366 Jy ! Component: 250 - total flux cleaned = -0.000419956 Jy ! Component: 300 - total flux cleaned = -0.000416676 Jy ! Component: 350 - total flux cleaned = -0.000573446 Jy ! Component: 400 - total flux cleaned = -0.000418125 Jy ! Total flux subtracted in 400 components = -0.000418125 Jy ! Clean residual min=-0.004426 max=0.004024 Jy/beam ! Clean residual mean=0.000006 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 1.65555 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 372 components and 1.65555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092643Jy sigma=1.115079 ! Fit after self-cal, rms=0.092522Jy sigma=1.112852 wmodel /scr/pima/rdv93_uvs/J2134-0153_S_map.mod ! Writing 372 model components to file: /scr/pima/rdv93_uvs/J2134-0153_S_map.mod wobs /scr/pima/rdv93_uvs/J2134-0153_S_uvs.fits ! Applying 896 buffered edits. ! Writing UV FITS file: /scr/pima/rdv93_uvs/J2134-0153_S_uvs.fits wwins /scr/pima/rdv93_uvs/J2134-0153_S_map.win ! wwins: Wrote 7 windows to /scr/pima/rdv93_uvs/J2134-0153_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122181 Jy ! Component: 100 - total flux cleaned = -0.00207585 Jy ! Component: 150 - total flux cleaned = -0.00268615 Jy ! Component: 200 - total flux cleaned = -0.00307872 Jy ! Component: 250 - total flux cleaned = -0.0034604 Jy ! Component: 300 - total flux cleaned = -0.00370915 Jy ! Component: 350 - total flux cleaned = -0.00382919 Jy ! Component: 400 - total flux cleaned = -0.00388924 Jy ! Component: 450 - total flux cleaned = -0.00412201 Jy ! Component: 500 - total flux cleaned = -0.00412211 Jy ! Component: 550 - total flux cleaned = -0.00390063 Jy ! Component: 600 - total flux cleaned = -0.00379283 Jy ! Component: 650 - total flux cleaned = -0.00368607 Jy ! Component: 700 - total flux cleaned = -0.00363256 Jy ! Component: 750 - total flux cleaned = -0.00342319 Jy ! Component: 800 - total flux cleaned = -0.00321652 Jy ! Component: 850 - total flux cleaned = -0.00311468 Jy ! Component: 900 - total flux cleaned = -0.00286318 Jy ! Component: 950 - total flux cleaned = -0.00276373 Jy ! Component: 1000 - total flux cleaned = -0.00266527 Jy ! Component: 1050 - total flux cleaned = -0.00242194 Jy ! Component: 1100 - total flux cleaned = -0.00246992 Jy ! Component: 1150 - total flux cleaned = -0.00237422 Jy ! Component: 1200 - total flux cleaned = -0.00223227 Jy ! Component: 1250 - total flux cleaned = -0.00218569 Jy ! Component: 1300 - total flux cleaned = -0.00209255 Jy ! Component: 1350 - total flux cleaned = -0.00190774 Jy ! Component: 1400 - total flux cleaned = -0.00190855 Jy ! Component: 1450 - total flux cleaned = -0.00195407 Jy ! Component: 1500 - total flux cleaned = -0.00181865 Jy ! Component: 1550 - total flux cleaned = -0.00177343 Jy ! Component: 1600 - total flux cleaned = -0.00177332 Jy ! Component: 1650 - total flux cleaned = -0.00190652 Jy ! Component: 1700 - total flux cleaned = -0.00186225 Jy ! Component: 1750 - total flux cleaned = -0.00159939 Jy ! Component: 1800 - total flux cleaned = -0.00181745 Jy ! Component: 1850 - total flux cleaned = -0.00168756 Jy ! Component: 1900 - total flux cleaned = -0.00168756 Jy ! Component: 1950 - total flux cleaned = -0.00168732 Jy ! Component: 2000 - total flux cleaned = -0.0016446 Jy ! Component: 2050 - total flux cleaned = -0.00164467 Jy ! Component: 2100 - total flux cleaned = -0.00156031 Jy ! Component: 2150 - total flux cleaned = -0.00172765 Jy ! Component: 2200 - total flux cleaned = -0.00160295 Jy ! Component: 2250 - total flux cleaned = -0.00147845 Jy ! Component: 2300 - total flux cleaned = -0.00139617 Jy ! Component: 2350 - total flux cleaned = -0.00139594 Jy ! Component: 2400 - total flux cleaned = -0.00135501 Jy ! Component: 2450 - total flux cleaned = -0.00127414 Jy ! Component: 2500 - total flux cleaned = -0.00115343 Jy ! Component: 2550 - total flux cleaned = -0.00111352 Jy ! Component: 2600 - total flux cleaned = -0.0011532 Jy ! Component: 2650 - total flux cleaned = -0.00119221 Jy ! Component: 2700 - total flux cleaned = -0.00115272 Jy ! Component: 2750 - total flux cleaned = -0.0011137 Jy ! Component: 2800 - total flux cleaned = -0.00107499 Jy ! Component: 2850 - total flux cleaned = -0.00103628 Jy ! Component: 2900 - total flux cleaned = -0.000844057 Jy ! Component: 2950 - total flux cleaned = -0.000805795 Jy ! Component: 3000 - total flux cleaned = -0.000844124 Jy ! Component: 3050 - total flux cleaned = -0.000882282 Jy ! Component: 3100 - total flux cleaned = -0.000920095 Jy ! Component: 3150 - total flux cleaned = -0.000694187 Jy ! Component: 3200 - total flux cleaned = -0.0008065 Jy ! Component: 3250 - total flux cleaned = -0.000731991 Jy ! Component: 3300 - total flux cleaned = -0.000731945 Jy ! Component: 3350 - total flux cleaned = -0.000657789 Jy ! Component: 3400 - total flux cleaned = -0.000584305 Jy ! Component: 3450 - total flux cleaned = -0.000768081 Jy ! Component: 3500 - total flux cleaned = -0.000694834 Jy ! Component: 3550 - total flux cleaned = -0.000731357 Jy ! Component: 3600 - total flux cleaned = -0.000659012 Jy ! Component: 3650 - total flux cleaned = -0.000767214 Jy ! Component: 3700 - total flux cleaned = -0.000803486 Jy ! Component: 3750 - total flux cleaned = -0.000875115 Jy ! Component: 3800 - total flux cleaned = -0.000946338 Jy ! Component: 3850 - total flux cleaned = -0.000946086 Jy ! Component: 3900 - total flux cleaned = -0.000910757 Jy ! Component: 3950 - total flux cleaned = -0.000805189 Jy ! Component: 4000 - total flux cleaned = -0.000910474 Jy ! Component: 4050 - total flux cleaned = -0.000910413 Jy ! Total flux subtracted in 4096 components = -0.000945264 Jy ! Clean residual min=-0.002153 max=0.002051 Jy/beam ! Clean residual mean=0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 1.6546 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 611 components and 1.6546 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv93_uvs/J2134-0153_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.796 x 7.911 at -10.74 degrees (North through East) ! Clean map min=-0.0039596 max=1.2508 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J2134-0153_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.2507 rms= 0.00062 Jy quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J2134-0153_S_uvs.log closed on Tue Oct 8 15:34:07 2013