! Started logfile: /scr/pima/rdv93_uvs/J1707+0148_S_uvs.log on Tue Oct 8 15:31:27 2013 obs /scr/pima/rdv93_uvs/J1707+0148_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J1707+0148_S_uva.fits ! AN table 1: 12 integrations on 3 of 3 possible baselines. ! AN table 2: 12 integrations on 6 of 6 possible baselines. ! AN table 3: 12 integrations on 10 of 10 possible baselines. ! AN table 4: 3 integrations on 1 of 1 possible baselines. ! AN table 5: 10 integrations on 15 of 15 possible baselines. ! AN table 6: 3 integrations on 28 of 28 possible baselines. ! AN table 7: 3 integrations on 28 of 28 possible baselines. ! AN table 8: 3 integrations on 28 of 28 possible baselines. ! AN table 9: 3 integrations on 3 of 3 possible baselines. ! AN table 10: 6 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.754545 visibilities/baseline/integration-bin. ! Found source: J1707+0148 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1992 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv93_uvs/J1707+0148_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 10:MA self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 9. ! A total of 3 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 33 telescope corrections were flagged in sub-array 2. ! A total of 35 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 29 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 3 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.135302Jy sigma=12.080026 ! Fit after self-cal, rms=0.486204Jy sigma=4.613701 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:NY ! Flagging baselines of antenna 1:NY in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:FT ! Flagging baselines of antenna 2:FT in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:FT ! Flagging baselines of antenna 5:FT in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:NY ! Flagging baselines of antenna 6:NY in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 10:MA ! Flagging baselines of antenna 10:MA in the currently selected channels. flag 10:NY ! Flagging baselines of antenna 10:NY in the currently selected channels. flag 10:WZ ! Flagging baselines of antenna 10:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.123 mas, bmaj=8.516 mas, bpa=-14.48 degrees ! Estimated noise=2.2948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.453996 Jy ! Component: 100 - total flux cleaned = 0.561346 Jy ! Total flux subtracted in 100 components = 0.561346 Jy ! Clean residual min=-0.017914 max=0.038618 Jy/beam ! Clean residual mean=0.000048 rms=0.005242 Jy/beam ! Combined flux in latest and established models = 0.561346 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.561346 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! A total of 15 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 19 telescope corrections were flagged in sub-array 5. ! A total of 6 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.103493Jy sigma=1.388109 ! Fit after self-cal, rms=0.102510Jy sigma=1.395439 ! Inverting map and beam ! Estimated beam: bmin=4.115 mas, bmaj=8.603 mas, bpa=-14.09 degrees ! Estimated noise=2.30299 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369629 Jy ! Component: 100 - total flux cleaned = 0.0548879 Jy ! Total flux subtracted in 100 components = 0.0548879 Jy ! Clean residual min=-0.015594 max=0.013604 Jy/beam ! Clean residual mean=0.000029 rms=0.003623 Jy/beam ! Combined flux in latest and established models = 0.616234 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.616234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090320Jy sigma=1.197377 ! Fit after self-cal, rms=0.090291Jy sigma=1.197023 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.568 mas, bmaj=9.567 mas, bpa=-11.2 degrees ! Estimated noise=1.81213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109321 Jy ! Component: 100 - total flux cleaned = 0.0167305 Jy ! Component: 150 - total flux cleaned = 0.0203508 Jy ! Component: 200 - total flux cleaned = 0.0214175 Jy ! Total flux subtracted in 200 components = 0.0214175 Jy ! Clean residual min=-0.010769 max=0.012628 Jy/beam ! Clean residual mean=-0.000019 rms=0.003257 Jy/beam ! Combined flux in latest and established models = 0.637652 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.637652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089461Jy sigma=1.173775 ! Fit after self-cal, rms=0.089448Jy sigma=1.173676 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.02 HN 0.95 LA 1.14 NL 0.98 ! NY 1.00* PT 1.06 SC 0.89 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.95 FD 0.98 HN 0.92 LA 1.11 ! MK 0.98 NL 1.01 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.91 FD 1.00 HN 1.09 KP 1.04 ! LA 1.12 NL 0.98 OV 0.98 PT 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.08 HN 1.05 LA 1.08 NL 1.04 ! NY 1.00* PT 1.04 SC 0.98 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 FD 1.08 HN 1.04 LA 1.04 ! MK 1.06 NL 1.00 OV 1.02 PT 1.04 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 FD 1.03 HN 1.18 KP 1.01 ! LA 1.02 NL 1.01 OV 1.02 PT 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.09 HN 0.93 LA 0.97 NL 1.10 ! NY 1.00* PT 1.10 SC 0.89 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 FD 1.07 HN 0.95 LA 0.97 ! MK 1.02 NL 1.08 OV 1.01 PT 1.09 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 FD 1.09 HN 1.09 KP 0.87 ! LA 0.97 NL 1.05 OV 0.99 PT 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! NY 0.00* WZ 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.05 HN 0.94 LA 0.80 NL 1.02 ! NY 1.00* PT 0.95 SC 0.93 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.26 FD 1.04 HN 0.92 LA 0.82 ! MK 1.11 NL 1.00 OV 0.87 PT 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.16 FD 0.98 HN 0.99 KP 0.83 ! LA 0.82 NL 1.01 OV 0.88 PT 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* MK 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.089448Jy sigma=1.173676 ! Fit after self-cal, rms=0.053157Jy sigma=0.643856 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.454 mas, bmaj=10.45 mas, bpa=-9.051 degrees ! Estimated noise=1.8475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100487 Jy ! Component: 100 - total flux cleaned = -0.00118014 Jy ! Component: 150 - total flux cleaned = -0.00117671 Jy ! Component: 200 - total flux cleaned = -0.0012402 Jy ! Total flux subtracted in 200 components = -0.0012402 Jy ! Clean residual min=-0.004367 max=0.003916 Jy/beam ! Clean residual mean=-0.000009 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.636411 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.636411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052831Jy sigma=0.640874 ! Fit after self-cal, rms=0.052906Jy sigma=0.640481 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052906Jy sigma=0.640481 ! Fit after self-cal, rms=0.052928Jy sigma=0.640181 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.455 mas, bmaj=10.45 mas, bpa=-9.02 degrees ! Estimated noise=1.84799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115251 Jy ! Component: 100 - total flux cleaned = -5.89647e-05 Jy ! Component: 150 - total flux cleaned = -0.000249026 Jy ! Component: 200 - total flux cleaned = -0.00033281 Jy ! Total flux subtracted in 200 components = -0.00033281 Jy ! Clean residual min=-0.004298 max=0.003880 Jy/beam ! Clean residual mean=-0.000006 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.636079 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.636079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052793Jy sigma=0.639024 ! Fit after self-cal, rms=0.052787Jy sigma=0.638933 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112579 Jy ! Component: 100 - total flux cleaned = -1.89583e-06 Jy ! Component: 150 - total flux cleaned = -0.00010387 Jy ! Component: 200 - total flux cleaned = -0.000163886 Jy ! Total flux subtracted in 200 components = -0.000163886 Jy ! Clean residual min=-0.004223 max=0.003912 Jy/beam ! Clean residual mean=-0.000006 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.635915 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.635915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052725Jy sigma=0.638426 ! Fit after self-cal, rms=0.052724Jy sigma=0.638371 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052724Jy sigma=0.638371 ! Fit after self-cal, rms=0.052735Jy sigma=0.638159 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.451 mas, bmaj=10.46 mas, bpa=-9.021 degrees ! Estimated noise=1.8479 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201191 Jy ! Component: 100 - total flux cleaned = 9.68269e-05 Jy ! Component: 150 - total flux cleaned = 4.49889e-06 Jy ! Component: 200 - total flux cleaned = -5.08499e-05 Jy ! Total flux subtracted in 200 components = -5.08499e-05 Jy ! Clean residual min=-0.004175 max=0.003933 Jy/beam ! Clean residual mean=-0.000005 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.635864 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.635864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052683Jy sigma=0.637732 ! Fit after self-cal, rms=0.052684Jy sigma=0.637686 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.03873e-05 Jy ! Component: 100 - total flux cleaned = 3.05623e-06 Jy ! Component: 150 - total flux cleaned = 3.2037e-06 Jy ! Component: 200 - total flux cleaned = 3.52003e-06 Jy ! Total flux subtracted in 200 components = 3.52003e-06 Jy ! Clean residual min=-0.004145 max=0.003952 Jy/beam ! Clean residual mean=-0.000005 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.635867 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.635867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052653Jy sigma=0.637464 ! Fit after self-cal, rms=0.052655Jy sigma=0.637435 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052655Jy sigma=0.637435 ! Fit after self-cal, rms=0.052661Jy sigma=0.637357 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.683 mas, bmaj=12.44 mas, bpa=2.76 degrees ! Estimated noise=1.96182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.37292e-05 Jy ! Component: 100 - total flux cleaned = 4.0314e-05 Jy ! Component: 150 - total flux cleaned = 2.64005e-05 Jy ! Component: 200 - total flux cleaned = 1.32172e-05 Jy ! Total flux subtracted in 200 components = 1.32172e-05 Jy ! Clean residual min=-0.003670 max=0.004141 Jy/beam ! Clean residual mean=-0.000007 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.635881 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.635881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052658Jy sigma=0.637264 ! Fit after self-cal, rms=0.052663Jy sigma=0.637254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78096e-06 Jy ! Component: 100 - total flux cleaned = -1.08499e-05 Jy ! Component: 150 - total flux cleaned = -2.26806e-05 Jy ! Component: 200 - total flux cleaned = -3.34687e-05 Jy ! Total flux subtracted in 200 components = -3.34687e-05 Jy ! Clean residual min=-0.003649 max=0.004128 Jy/beam ! Clean residual mean=-0.000007 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.635847 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.635847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052661Jy sigma=0.637211 ! Fit after self-cal, rms=0.052664Jy sigma=0.637206 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 5:HN,true ! 5:HN self-cal status=fixed weight=1 selfant 5:NL,true ! 5:NL self-cal status=fixed weight=1 selfant 5:SC,true ! 5:SC self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:MK,true ! 7:MK self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 8:BR,true ! 8:BR self-cal status=fixed weight=1 selfant 8:FD,true ! 8:FD self-cal status=fixed weight=1 selfant 8:HN,true ! 8:HN self-cal status=fixed weight=1 selfant 8:KP,true ! 8:KP self-cal status=fixed weight=1 selfant 8:LA,true ! 8:LA self-cal status=fixed weight=1 selfant 8:NL,true ! 8:NL self-cal status=fixed weight=1 selfant 8:OV,true ! 8:OV self-cal status=fixed weight=1 selfant 8:PT,true ! 8:PT self-cal status=fixed weight=1 selfant 9:BR,true ! 9:BR self-cal status=fixed weight=1 selfant 9:MK,true ! 9:MK self-cal status=fixed weight=1 selfant 9:OV,true ! 9:OV self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 36 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.238858Jy sigma=1.312704 ! Fit after self-cal, rms=0.092932Jy sigma=0.753320 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:NY self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:HN self-cal status=correctable weight=1 ! 5:NL self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:SC self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:NY self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 8:BR self-cal status=correctable weight=1 ! 8:FD self-cal status=correctable weight=1 ! 8:HN self-cal status=correctable weight=1 ! 8:KP self-cal status=correctable weight=1 ! 8:LA self-cal status=correctable weight=1 ! 8:NL self-cal status=correctable weight=1 ! 8:OV self-cal status=correctable weight=1 ! 8:PT self-cal status=correctable weight=1 ! 9:BR self-cal status=correctable weight=1 ! 9:MK self-cal status=correctable weight=1 ! 9:OV self-cal status=correctable weight=1 ! 10:MA self-cal status=correctable weight=1 ! 10:NY self-cal status=correctable weight=1 ! 10:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 16 telescope corrections were flagged in sub-array 3. ! A total of 14 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=0.092932Jy sigma=0.753320 ! Fit after self-cal, rms=0.079316Jy sigma=0.596062 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=8.209 mas, bpa=-16.57 degrees ! Estimated noise=2.49588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122205 Jy ! Component: 100 - total flux cleaned = -0.000576053 Jy ! Component: 150 - total flux cleaned = -0.00145249 Jy ! Component: 200 - total flux cleaned = -0.00202983 Jy ! Total flux subtracted in 200 components = -0.00202983 Jy ! Clean residual min=-0.005411 max=0.006081 Jy/beam ! Clean residual mean=-0.000000 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.633817 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 0.633817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077241Jy sigma=0.592147 ! Fit after self-cal, rms=0.077280Jy sigma=0.590833 ! Inverting map ! Added new window around map position (-30, 24.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245344 Jy ! Component: 100 - total flux cleaned = 0.00133388 Jy ! Component: 150 - total flux cleaned = 0.000657317 Jy ! Component: 200 - total flux cleaned = 0.000346849 Jy ! Total flux subtracted in 200 components = 0.000346849 Jy ! Clean residual min=-0.005115 max=0.004951 Jy/beam ! Clean residual mean=-0.000000 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.634164 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.634164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076205Jy sigma=0.587498 ! Fit after self-cal, rms=0.076207Jy sigma=0.587177 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=9.084 mas, bpa=-14.13 degrees ! Estimated noise=1.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (101.6, -52). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217577 Jy ! Component: 100 - total flux cleaned = 0.00207815 Jy ! Component: 150 - total flux cleaned = 0.00208569 Jy ! Component: 200 - total flux cleaned = 0.00208795 Jy ! Component: 250 - total flux cleaned = 0.00208721 Jy ! Component: 300 - total flux cleaned = 0.00208657 Jy ! Component: 350 - total flux cleaned = 0.00208575 Jy ! Component: 400 - total flux cleaned = 0.00208725 Jy ! Total flux subtracted in 400 components = 0.00208725 Jy ! Clean residual min=-0.003406 max=0.003564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.636251 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 127 components and 0.636251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075499Jy sigma=0.582283 ! Fit after self-cal, rms=0.075476Jy sigma=0.582059 ! Inverting map ! Added new window around map position (-92.4, 64.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238522 Jy ! Component: 100 - total flux cleaned = 0.00305641 Jy ! Component: 150 - total flux cleaned = 0.00352238 Jy ! Component: 200 - total flux cleaned = 0.00361109 Jy ! Component: 250 - total flux cleaned = 0.00361157 Jy ! Component: 300 - total flux cleaned = 0.00353501 Jy ! Component: 350 - total flux cleaned = 0.00331991 Jy ! Component: 400 - total flux cleaned = 0.00318384 Jy ! Total flux subtracted in 400 components = 0.00318384 Jy ! Clean residual min=-0.003174 max=0.003054 Jy/beam ! Clean residual mean=0.000000 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.639435 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 165 components and 0.639435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074779Jy sigma=0.577329 ! Fit after self-cal, rms=0.074777Jy sigma=0.577098 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168777 Jy ! Component: 100 - total flux cleaned = 9.87991e-05 Jy ! Component: 150 - total flux cleaned = -9.74294e-05 Jy ! Component: 200 - total flux cleaned = -0.000222811 Jy ! Component: 250 - total flux cleaned = -0.000345424 Jy ! Component: 300 - total flux cleaned = -0.000464312 Jy ! Component: 350 - total flux cleaned = -0.0005214 Jy ! Component: 400 - total flux cleaned = -0.000634023 Jy ! Total flux subtracted in 400 components = -0.000634023 Jy ! Clean residual min=-0.003123 max=0.002886 Jy/beam ! Clean residual mean=-0.000003 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.638801 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 187 components and 0.638801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074406Jy sigma=0.575240 ! Fit after self-cal, rms=0.074400Jy sigma=0.575156 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 32 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 32 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 32 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! A total of 48 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 32 telescope corrections were flagged in sub-array 5. ! A total of 1 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 9. ! A total of 18 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=0.235795Jy sigma=1.292496 ! Fit after self-cal, rms=0.073764Jy sigma=0.573671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.518 mas, bmaj=9.097 mas, bpa=-14.08 degrees ! Estimated noise=1.88912 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037908 Jy ! Component: 100 - total flux cleaned = 0.000162895 Jy ! Component: 150 - total flux cleaned = 0.000100084 Jy ! Component: 200 - total flux cleaned = -8.49474e-05 Jy ! Component: 250 - total flux cleaned = -0.000203954 Jy ! Component: 300 - total flux cleaned = -0.00026326 Jy ! Component: 350 - total flux cleaned = -0.000431489 Jy ! Component: 400 - total flux cleaned = -0.000484085 Jy ! Total flux subtracted in 400 components = -0.000484085 Jy ! Clean residual min=-0.002952 max=0.002715 Jy/beam ! Clean residual mean=-0.000003 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.638317 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 210 components and 0.638317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073318Jy sigma=0.572050 ! Fit after self-cal, rms=0.073327Jy sigma=0.571977 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103807 Jy ! Component: 100 - total flux cleaned = -0.000156875 Jy ! Component: 150 - total flux cleaned = -0.000310863 Jy ! Component: 200 - total flux cleaned = -0.000360468 Jy ! Component: 250 - total flux cleaned = -0.000408138 Jy ! Component: 300 - total flux cleaned = -0.000503734 Jy ! Component: 350 - total flux cleaned = -0.000550179 Jy ! Component: 400 - total flux cleaned = -0.000641352 Jy ! Total flux subtracted in 400 components = -0.000641352 Jy ! Clean residual min=-0.002882 max=0.002596 Jy/beam ! Clean residual mean=-0.000003 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.637675 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 230 components and 0.637676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073083Jy sigma=0.570884 ! Fit after self-cal, rms=0.073080Jy sigma=0.570843 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073080Jy sigma=0.570843 ! Fit after self-cal, rms=0.073018Jy sigma=0.570556 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=9.105 mas, bpa=-14.04 degrees ! Estimated noise=1.88903 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128151 Jy ! Component: 100 - total flux cleaned = -0.000285655 Jy ! Component: 150 - total flux cleaned = -0.000383786 Jy ! Component: 200 - total flux cleaned = -0.000522449 Jy ! Component: 250 - total flux cleaned = -0.000567302 Jy ! Component: 300 - total flux cleaned = -0.000611874 Jy ! Component: 350 - total flux cleaned = -0.00065591 Jy ! Component: 400 - total flux cleaned = -0.000656566 Jy ! Total flux subtracted in 400 components = -0.000656566 Jy ! Clean residual min=-0.002924 max=0.002577 Jy/beam ! Clean residual mean=-0.000004 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.637019 Jy selfcal ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 249 components and 0.637019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072771Jy sigma=0.569591 ! Fit after self-cal, rms=0.072770Jy sigma=0.569552 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012921 Jy ! Component: 100 - total flux cleaned = -0.000128795 Jy ! Component: 150 - total flux cleaned = -0.00016972 Jy ! Component: 200 - total flux cleaned = -0.000128504 Jy ! Component: 250 - total flux cleaned = -0.000129393 Jy ! Component: 300 - total flux cleaned = -0.000168139 Jy ! Component: 350 - total flux cleaned = -0.000129974 Jy ! Component: 400 - total flux cleaned = -0.000129286 Jy ! Total flux subtracted in 400 components = -0.000129286 Jy ! Clean residual min=-0.002881 max=0.002503 Jy/beam ! Clean residual mean=-0.000004 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.63689 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 277 components and 0.63689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072612Jy sigma=0.568818 ! Fit after self-cal, rms=0.072607Jy sigma=0.568797 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072607Jy sigma=0.568797 ! Fit after self-cal, rms=0.071596Jy sigma=0.559341 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.688 mas, bmaj=11.51 mas, bpa=3.033 degrees ! Estimated noise=1.93015 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107154 Jy ! Component: 100 - total flux cleaned = -4.67431e-05 Jy ! Component: 150 - total flux cleaned = -0.000211936 Jy ! Component: 200 - total flux cleaned = -0.0003606 Jy ! Component: 250 - total flux cleaned = -0.000416794 Jy ! Component: 300 - total flux cleaned = -0.000519959 Jy ! Component: 350 - total flux cleaned = -0.00059471 Jy ! Component: 400 - total flux cleaned = -0.000642074 Jy ! Total flux subtracted in 400 components = -0.000642074 Jy ! Clean residual min=-0.002951 max=0.002674 Jy/beam ! Clean residual mean=-0.000009 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.636248 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 309 components and 0.636248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071580Jy sigma=0.558657 ! Fit after self-cal, rms=0.071570Jy sigma=0.558603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018279 Jy ! Component: 100 - total flux cleaned = 0.000158295 Jy ! Component: 150 - total flux cleaned = 0.000112793 Jy ! Component: 200 - total flux cleaned = 9.03938e-05 Jy ! Component: 250 - total flux cleaned = 6.96427e-05 Jy ! Component: 300 - total flux cleaned = 4.95105e-05 Jy ! Component: 350 - total flux cleaned = 3.00109e-05 Jy ! Component: 400 - total flux cleaned = 1.04037e-05 Jy ! Total flux subtracted in 400 components = 1.04037e-05 Jy ! Clean residual min=-0.002898 max=0.002640 Jy/beam ! Clean residual mean=-0.000008 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.636258 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 336 components and 0.636258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071565Jy sigma=0.558304 ! Fit after self-cal, rms=0.071554Jy sigma=0.558287 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=9.114 mas, bpa=-14.01 degrees ! Estimated noise=1.8916 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.509 x 9.114 at -14.01 degrees (North through East) ! Clean map min=-0.0038835 max=0.56566 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071554Jy sigma=0.558287 ! Fit after self-cal, rms=0.067577Jy sigma=0.513065 ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=9.113 mas, bpa=-14.02 degrees ! Estimated noise=1.89069 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120393 Jy ! Component: 100 - total flux cleaned = 0.00011925 Jy ! Component: 150 - total flux cleaned = 0.000161624 Jy ! Component: 200 - total flux cleaned = 0.000202518 Jy ! Component: 250 - total flux cleaned = 0.000162741 Jy ! Component: 300 - total flux cleaned = 0.000124252 Jy ! Component: 350 - total flux cleaned = 4.89755e-05 Jy ! Component: 400 - total flux cleaned = -6.10623e-05 Jy ! Total flux subtracted in 400 components = -6.10623e-05 Jy ! Clean residual min=-0.002674 max=0.002386 Jy/beam ! Clean residual mean=-0.000003 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.636197 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 351 components and 0.636197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067391Jy sigma=0.512268 ! Fit after self-cal, rms=0.067390Jy sigma=0.512251 ! Inverting map ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46956e-05 Jy ! Component: 100 - total flux cleaned = -2.74447e-05 Jy ! Component: 150 - total flux cleaned = -0.000133262 Jy ! Component: 200 - total flux cleaned = -9.85678e-05 Jy ! Component: 250 - total flux cleaned = -0.000166255 Jy ! Component: 300 - total flux cleaned = -0.000166231 Jy ! Component: 350 - total flux cleaned = -0.000166898 Jy ! Component: 400 - total flux cleaned = -0.000231323 Jy ! Total flux subtracted in 400 components = -0.000231323 Jy ! Clean residual min=-0.002666 max=0.002367 Jy/beam ! Clean residual mean=-0.000004 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.635966 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 366 components and 0.635966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067258Jy sigma=0.511724 ! Fit after self-cal, rms=0.067261Jy sigma=0.511715 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067261Jy sigma=0.511715 ! Fit after self-cal, rms=0.067332Jy sigma=0.511625 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=8.241 mas, bpa=-16.43 degrees ! Estimated noise=2.496 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.435748 Jy ! Component: 100 - total flux cleaned = 0.552357 Jy ! Component: 150 - total flux cleaned = 0.595039 Jy ! Component: 200 - total flux cleaned = 0.612282 Jy ! Component: 250 - total flux cleaned = 0.621403 Jy ! Component: 300 - total flux cleaned = 0.627903 Jy ! Component: 350 - total flux cleaned = 0.631564 Jy ! Component: 400 - total flux cleaned = 0.633434 Jy ! Total flux subtracted in 400 components = 0.633434 Jy ! Clean residual min=-0.004702 max=0.005562 Jy/beam ! Clean residual mean=0.000005 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.633434 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.633434 Jy ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=9.116 mas, bpa=-14 degrees ! Estimated noise=1.89089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 11.2). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388733 Jy ! Component: 100 - total flux cleaned = 0.00453109 Jy ! Component: 150 - total flux cleaned = 0.00438256 Jy ! Component: 200 - total flux cleaned = 0.00424412 Jy ! Component: 250 - total flux cleaned = 0.0039947 Jy ! Component: 300 - total flux cleaned = 0.00376023 Jy ! Component: 350 - total flux cleaned = 0.00365059 Jy ! Component: 400 - total flux cleaned = 0.00343915 Jy ! Total flux subtracted in 400 components = 0.00343915 Jy ! Clean residual min=-0.003229 max=0.003139 Jy/beam ! Clean residual mean=-0.000003 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.636873 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 135 components and 0.636873 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.687 mas, bmaj=11.51 mas, bpa=2.969 degrees ! Estimated noise=1.93081 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000670055 Jy ! Component: 100 - total flux cleaned = -0.0012096 Jy ! Component: 150 - total flux cleaned = -0.0015508 Jy ! Component: 200 - total flux cleaned = -0.00186337 Jy ! Component: 250 - total flux cleaned = -0.0022129 Jy ! Component: 300 - total flux cleaned = -0.00253824 Jy ! Component: 350 - total flux cleaned = -0.00269217 Jy ! Component: 400 - total flux cleaned = -0.00278897 Jy ! Total flux subtracted in 400 components = -0.00278897 Jy ! Clean residual min=-0.002828 max=0.002727 Jy/beam ! Clean residual mean=-0.000007 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.634084 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.61886e-05 Jy ! Component: 100 - total flux cleaned = -4.60748e-05 Jy ! Component: 150 - total flux cleaned = -8.81912e-05 Jy ! Component: 200 - total flux cleaned = -0.000128152 Jy ! Component: 250 - total flux cleaned = -0.000167546 Jy ! Component: 300 - total flux cleaned = -0.000205742 Jy ! Component: 350 - total flux cleaned = -0.000280132 Jy ! Component: 400 - total flux cleaned = -0.000315127 Jy ! Total flux subtracted in 400 components = -0.000315127 Jy ! Clean residual min=-0.002755 max=0.002602 Jy/beam ! Clean residual mean=-0.000008 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.633769 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 248 components and 0.633769 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=9.116 mas, bpa=-14 degrees ! Estimated noise=1.89089 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53541e-05 Jy ! Component: 100 - total flux cleaned = 0.000250213 Jy ! Component: 150 - total flux cleaned = 0.000250929 Jy ! Component: 200 - total flux cleaned = 0.000178188 Jy ! Component: 250 - total flux cleaned = 4.05266e-05 Jy ! Component: 300 - total flux cleaned = -9.13094e-05 Jy ! Component: 350 - total flux cleaned = -0.000154637 Jy ! Component: 400 - total flux cleaned = -0.000217823 Jy ! Total flux subtracted in 400 components = -0.000217823 Jy ! Clean residual min=-0.002839 max=0.002458 Jy/beam ! Clean residual mean=-0.000004 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.633551 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 292 components and 0.633551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067670Jy sigma=0.514978 ! Fit after self-cal, rms=0.067612Jy sigma=0.514566 wmodel /scr/pima/rdv93_uvs/J1707+0148_S_map.mod ! Writing 292 model components to file: /scr/pima/rdv93_uvs/J1707+0148_S_map.mod wobs /scr/pima/rdv93_uvs/J1707+0148_S_uvs.fits ! Applying 1488 buffered edits. ! Writing UV FITS file: /scr/pima/rdv93_uvs/J1707+0148_S_uvs.fits wwins /scr/pima/rdv93_uvs/J1707+0148_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rdv93_uvs/J1707+0148_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127815 Jy ! Component: 100 - total flux cleaned = -0.00222677 Jy ! Component: 150 - total flux cleaned = -0.0031309 Jy ! Component: 200 - total flux cleaned = -0.00382915 Jy ! Component: 250 - total flux cleaned = -0.00450847 Jy ! Component: 300 - total flux cleaned = -0.0052103 Jy ! Component: 350 - total flux cleaned = -0.00581307 Jy ! Component: 400 - total flux cleaned = -0.0062066 Jy ! Component: 450 - total flux cleaned = -0.00659196 Jy ! Component: 500 - total flux cleaned = -0.00693213 Jy ! Component: 550 - total flux cleaned = -0.00722951 Jy ! Component: 600 - total flux cleaned = -0.00752192 Jy ! Component: 650 - total flux cleaned = -0.00795332 Jy ! Component: 700 - total flux cleaned = -0.00820118 Jy ! Component: 750 - total flux cleaned = -0.0085155 Jy ! Component: 800 - total flux cleaned = -0.00882537 Jy ! Component: 850 - total flux cleaned = -0.00909681 Jy ! Component: 900 - total flux cleaned = -0.00926472 Jy ! Component: 950 - total flux cleaned = -0.00943042 Jy ! Component: 1000 - total flux cleaned = -0.00959388 Jy ! Component: 1050 - total flux cleaned = -0.00965851 Jy ! Component: 1100 - total flux cleaned = -0.00978656 Jy ! Component: 1150 - total flux cleaned = -0.00981834 Jy ! Component: 1200 - total flux cleaned = -0.00988111 Jy ! Component: 1250 - total flux cleaned = -0.00985065 Jy ! Component: 1300 - total flux cleaned = -0.00985087 Jy ! Component: 1350 - total flux cleaned = -0.0100318 Jy ! Component: 1400 - total flux cleaned = -0.00988184 Jy ! Component: 1450 - total flux cleaned = -0.00985239 Jy ! Component: 1500 - total flux cleaned = -0.0099408 Jy ! Component: 1550 - total flux cleaned = -0.00988219 Jy ! Component: 1600 - total flux cleaned = -0.00988229 Jy ! Component: 1650 - total flux cleaned = -0.00988253 Jy ! Component: 1700 - total flux cleaned = -0.00985408 Jy ! Component: 1750 - total flux cleaned = -0.00991035 Jy ! Component: 1800 - total flux cleaned = -0.00996614 Jy ! Component: 1850 - total flux cleaned = -0.00985565 Jy ! Component: 1900 - total flux cleaned = -0.00988341 Jy ! Component: 1950 - total flux cleaned = -0.00985643 Jy ! Component: 2000 - total flux cleaned = -0.00977546 Jy ! Component: 2050 - total flux cleaned = -0.00980233 Jy ! Component: 2100 - total flux cleaned = -0.00972223 Jy ! Component: 2150 - total flux cleaned = -0.0096692 Jy ! Component: 2200 - total flux cleaned = -0.00961644 Jy ! Component: 2250 - total flux cleaned = -0.00951229 Jy ! Component: 2300 - total flux cleaned = -0.00951222 Jy ! Component: 2350 - total flux cleaned = -0.00946075 Jy ! Component: 2400 - total flux cleaned = -0.00946054 Jy ! Component: 2450 - total flux cleaned = -0.00948578 Jy ! Component: 2500 - total flux cleaned = -0.00941002 Jy ! Component: 2550 - total flux cleaned = -0.00946004 Jy ! Component: 2600 - total flux cleaned = -0.00938538 Jy ! Component: 2650 - total flux cleaned = -0.00936062 Jy ! Component: 2700 - total flux cleaned = -0.00933599 Jy ! Component: 2750 - total flux cleaned = -0.00931132 Jy ! Component: 2800 - total flux cleaned = -0.00923845 Jy ! Component: 2850 - total flux cleaned = -0.00921432 Jy ! Component: 2900 - total flux cleaned = -0.0091427 Jy ! Component: 2950 - total flux cleaned = -0.00904763 Jy ! Component: 3000 - total flux cleaned = -0.00911897 Jy ! Component: 3050 - total flux cleaned = -0.00900127 Jy ! Component: 3100 - total flux cleaned = -0.00897764 Jy ! Component: 3150 - total flux cleaned = -0.00890785 Jy ! Component: 3200 - total flux cleaned = -0.00893095 Jy ! Component: 3250 - total flux cleaned = -0.00888489 Jy ! Component: 3300 - total flux cleaned = -0.00881627 Jy ! Component: 3350 - total flux cleaned = -0.00879377 Jy ! Component: 3400 - total flux cleaned = -0.00877119 Jy ! Component: 3450 - total flux cleaned = -0.00865888 Jy ! Component: 3500 - total flux cleaned = -0.00863672 Jy ! Component: 3550 - total flux cleaned = -0.00859216 Jy ! Component: 3600 - total flux cleaned = -0.0085258 Jy ! Component: 3650 - total flux cleaned = -0.00848177 Jy ! Component: 3700 - total flux cleaned = -0.00841631 Jy ! Component: 3750 - total flux cleaned = -0.00832944 Jy ! Component: 3800 - total flux cleaned = -0.00828629 Jy ! Component: 3850 - total flux cleaned = -0.00824333 Jy ! Component: 3900 - total flux cleaned = -0.00822197 Jy ! Component: 3950 - total flux cleaned = -0.00815841 Jy ! Component: 4000 - total flux cleaned = -0.00809488 Jy ! Component: 4050 - total flux cleaned = -0.00801084 Jy ! Total flux subtracted in 4096 components = -0.00792715 Jy ! Clean residual min=-0.001338 max=0.001299 Jy/beam ! Clean residual mean=-0.000001 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.625624 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 539 components and 0.625624 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv93_uvs/J1707+0148_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.504 x 9.116 at -14 degrees (North through East) ! Clean map min=-0.0030395 max=0.56477 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J1707+0148_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.5647 rms= 0.00039 Jy quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J1707+0148_S_uvs.log closed on Tue Oct 8 15:31:33 2013