! Started logfile: /scr/pima/rdv93_uvs/J1549+0237_S_uvs.log on Tue Oct 8 15:30:51 2013 obs /scr/pima/rdv93_uvs/J1549+0237_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J1549+0237_S_uva.fits ! AN table 1: 3 integrations on 1 of 1 possible baselines. ! AN table 2: 4 integrations on 6 of 6 possible baselines. ! AN table 3: 7 integrations on 10 of 10 possible baselines. ! AN table 4: 6 integrations on 15 of 15 possible baselines. ! AN table 5: 3 integrations on 3 of 3 possible baselines. ! AN table 6: 3 integrations on 45 of 45 possible baselines. ! AN table 7: 3 integrations on 45 of 45 possible baselines. ! AN table 8: 3 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.987368 visibilities/baseline/integration-bin. ! Found source: J1549+0237 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26299e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35299e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37299e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1876 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.4 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv93_uvs/J1549+0237_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:FT self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:MA self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:WZ self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.587442Jy sigma=37.906812 ! Fit after self-cal, rms=0.351560Jy sigma=7.459547 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] flag 1:FT ! Flagging baselines of antenna 1:FT in the currently selected channels. flag 1:WZ ! Flagging baselines of antenna 1:WZ in the currently selected channels. flag 2:FT ! Flagging baselines of antenna 2:FT in the currently selected channels. flag 2:NY ! Flagging baselines of antenna 2:NY in the currently selected channels. flag 2:WZ ! Flagging baselines of antenna 2:WZ in the currently selected channels. flag 3:FT ! Flagging baselines of antenna 3:FT in the currently selected channels. flag 3:NY ! Flagging baselines of antenna 3:NY in the currently selected channels. flag 3:WZ ! Flagging baselines of antenna 3:WZ in the currently selected channels. flag 4:FT ! Flagging baselines of antenna 4:FT in the currently selected channels. flag 4:NY ! Flagging baselines of antenna 4:NY in the currently selected channels. flag 4:WZ ! Flagging baselines of antenna 4:WZ in the currently selected channels. flag 5:FT ! Flagging baselines of antenna 5:FT in the currently selected channels. flag 5:NY ! Flagging baselines of antenna 5:NY in the currently selected channels. flag 5:WZ ! Flagging baselines of antenna 5:WZ in the currently selected channels. flag 6:FT ! Flagging baselines of antenna 6:FT in the currently selected channels. flag 6:WZ ! Flagging baselines of antenna 6:WZ in the currently selected channels. flag 7:FT ! Flagging baselines of antenna 7:FT in the currently selected channels. flag 8:MA ! Flagging baselines of antenna 8:MA in the currently selected channels. flag 8:NY ! Flagging baselines of antenna 8:NY in the currently selected channels. flag 8:WZ ! Flagging baselines of antenna 8:WZ in the currently selected channels. ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=6.584 mas, bpa=0.7864 degrees ! Estimated noise=1.16881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.930341 Jy ! Component: 100 - total flux cleaned = 1.15782 Jy ! Total flux subtracted in 100 components = 1.15782 Jy ! Clean residual min=-0.030628 max=0.087628 Jy/beam ! Clean residual mean=-0.000047 rms=0.010471 Jy/beam ! Combined flux in latest and established models = 1.15782 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.15782 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 28 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 3 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=0.198687Jy sigma=5.681347 ! Fit after self-cal, rms=0.199348Jy sigma=5.758921 ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=6.686 mas, bpa=1.069 degrees ! Estimated noise=1.17618 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0878461 Jy ! Component: 100 - total flux cleaned = 0.127709 Jy ! Total flux subtracted in 100 components = 0.127709 Jy ! Clean residual min=-0.026735 max=0.027156 Jy/beam ! Clean residual mean=0.000030 rms=0.006515 Jy/beam ! Combined flux in latest and established models = 1.28553 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 1.28553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159426Jy sigma=4.389782 ! Fit after self-cal, rms=0.159304Jy sigma=4.387200 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=7.708 mas, bpa=-0.3678 degrees ! Estimated noise=0.912482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273751 Jy ! Component: 100 - total flux cleaned = 0.0386606 Jy ! Component: 150 - total flux cleaned = 0.0390468 Jy ! Component: 200 - total flux cleaned = 0.0390501 Jy ! Total flux subtracted in 200 components = 0.0390501 Jy ! Clean residual min=-0.024057 max=0.028946 Jy/beam ! Clean residual mean=0.000082 rms=0.006889 Jy/beam ! Combined flux in latest and established models = 1.32458 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 44 components and 1.32458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155798Jy sigma=4.239836 ! Fit after self-cal, rms=0.155732Jy sigma=4.238312 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.00 FT 1.00* HN 0.92 ! LA 1.12 NL 0.97 OV 0.99 PT 1.04 ! SC 0.95 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 FD 1.01 FT 1.00* HN 0.93 ! LA 1.11 MK 0.93 NL 0.98 OV 0.98 ! PT 1.03 SC 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 1.07 FT 1.00* HN 1.04 ! LA 1.01 NL 1.03 OV 1.01 PT 1.02 ! SC 1.04 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 1.08 FT 1.00* HN 1.04 ! LA 1.03 MK 1.05 NL 1.01 OV 1.01 ! PT 1.02 SC 1.05 ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.04 FD 1.08 FT 1.00* HN 0.95 ! LA 0.95 NL 1.08 OV 1.02 PT 1.07 ! SC 0.92 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.08 FD 1.10 FT 1.00* HN 0.96 ! LA 0.96 MK 1.03 NL 1.09 OV 1.01 ! PT 1.06 SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FT 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FT 0.00* NY 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FT 0.00* HN 0.00* NY 0.00* SC 0.00* ! WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FT 0.00* HN 0.00* NL 0.00* NY 0.00* ! SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! FT 0.00* NY 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 1.05 FT 1.00* HN 0.93 ! LA 0.79 NL 1.00 OV 0.87 PT 0.95 ! SC 0.99 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.07 FD 1.06 FT 1.00* HN 0.93 ! LA 0.80 MK 1.14 NL 1.01 OV 0.88 ! PT 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 8: ! MA 0.00* NY 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.155732Jy sigma=4.238312 ! Fit after self-cal, rms=0.057899Jy sigma=1.473975 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=8.062 mas, bpa=0.3187 degrees ! Estimated noise=0.912545 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139075 Jy ! Component: 100 - total flux cleaned = 0.0225569 Jy ! Component: 150 - total flux cleaned = 0.0282134 Jy ! Component: 200 - total flux cleaned = 0.0293544 Jy ! Total flux subtracted in 200 components = 0.0293544 Jy ! Clean residual min=-0.005429 max=0.006670 Jy/beam ! Clean residual mean=-0.000005 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 1.35393 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 1.35393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052887Jy sigma=1.362801 ! Fit after self-cal, rms=0.052658Jy sigma=1.358276 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052658Jy sigma=1.358276 ! Fit after self-cal, rms=0.052602Jy sigma=1.353767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=8.056 mas, bpa=0.3159 degrees ! Estimated noise=0.911951 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443583 Jy ! Component: 100 - total flux cleaned = 0.00524386 Jy ! Component: 150 - total flux cleaned = 0.00511457 Jy ! Component: 200 - total flux cleaned = 0.00486105 Jy ! Total flux subtracted in 200 components = 0.00486105 Jy ! Clean residual min=-0.005474 max=0.004977 Jy/beam ! Clean residual mean=-0.000002 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 1.35879 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 1.35879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051372Jy sigma=1.335849 ! Fit after self-cal, rms=0.051214Jy sigma=1.334249 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313304 Jy ! Component: 100 - total flux cleaned = -3.57575e-05 Jy ! Component: 150 - total flux cleaned = -0.000357467 Jy ! Component: 200 - total flux cleaned = -0.000563638 Jy ! Total flux subtracted in 200 components = -0.000563638 Jy ! Clean residual min=-0.005031 max=0.004763 Jy/beam ! Clean residual mean=-0.000001 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 1.35823 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 1.35823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050524Jy sigma=1.324546 ! Fit after self-cal, rms=0.050426Jy sigma=1.323691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050426Jy sigma=1.323691 ! Fit after self-cal, rms=0.050439Jy sigma=1.322427 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=8.053 mas, bpa=0.2945 degrees ! Estimated noise=0.912111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119109 Jy ! Component: 100 - total flux cleaned = 0.000697499 Jy ! Component: 150 - total flux cleaned = 0.000605593 Jy ! Component: 200 - total flux cleaned = 0.000430475 Jy ! Total flux subtracted in 200 components = 0.000430475 Jy ! Clean residual min=-0.004587 max=0.004427 Jy/beam ! Clean residual mean=0.000000 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 1.35866 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 1.35866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049903Jy sigma=1.314993 ! Fit after self-cal, rms=0.049833Jy sigma=1.314398 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92483e-05 Jy ! Component: 100 - total flux cleaned = -0.000135025 Jy ! Component: 150 - total flux cleaned = -0.000368067 Jy ! Component: 200 - total flux cleaned = -0.000441884 Jy ! Total flux subtracted in 200 components = -0.000441884 Jy ! Clean residual min=-0.004143 max=0.004257 Jy/beam ! Clean residual mean=0.000001 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 1.35822 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 1.35822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049475Jy sigma=1.309406 ! Fit after self-cal, rms=0.049425Jy sigma=1.309033 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049425Jy sigma=1.309033 ! Fit after self-cal, rms=0.049435Jy sigma=1.308571 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.28 mas, bmaj=11.66 mas, bpa=-3.45 degrees ! Estimated noise=1.06754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00074914 Jy ! Component: 100 - total flux cleaned = -0.00106361 Jy ! Component: 150 - total flux cleaned = -0.00132565 Jy ! Component: 200 - total flux cleaned = -0.00150892 Jy ! Total flux subtracted in 200 components = -0.00150892 Jy ! Clean residual min=-0.004255 max=0.003676 Jy/beam ! Clean residual mean=0.000004 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 1.35671 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 1.35671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049416Jy sigma=1.307518 ! Fit after self-cal, rms=0.049386Jy sigma=1.306638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000527376 Jy ! Component: 100 - total flux cleaned = -0.000652023 Jy ! Component: 150 - total flux cleaned = -0.000810852 Jy ! Component: 200 - total flux cleaned = -0.000809934 Jy ! Total flux subtracted in 200 components = -0.000809934 Jy ! Clean residual min=-0.004240 max=0.003496 Jy/beam ! Clean residual mean=0.000006 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 1.3559 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 1.3559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049388Jy sigma=1.306354 ! Fit after self-cal, rms=0.049369Jy sigma=1.305801 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 selfant 3:HN,true ! 3:HN self-cal status=fixed weight=1 selfant 3:SC,true ! 3:SC self-cal status=fixed weight=1 selfant 4:HN,true ! 4:HN self-cal status=fixed weight=1 selfant 4:NL,true ! 4:NL self-cal status=fixed weight=1 selfant 4:SC,true ! 4:SC self-cal status=fixed weight=1 selfant 6:BR,true ! 6:BR self-cal status=fixed weight=1 selfant 6:FD,true ! 6:FD self-cal status=fixed weight=1 selfant 6:HN,true ! 6:HN self-cal status=fixed weight=1 selfant 6:LA,true ! 6:LA self-cal status=fixed weight=1 selfant 6:NL,true ! 6:NL self-cal status=fixed weight=1 selfant 6:OV,true ! 6:OV self-cal status=fixed weight=1 selfant 6:PT,true ! 6:PT self-cal status=fixed weight=1 selfant 6:SC,true ! 6:SC self-cal status=fixed weight=1 selfant 7:BR,true ! 7:BR self-cal status=fixed weight=1 selfant 7:FD,true ! 7:FD self-cal status=fixed weight=1 selfant 7:HN,true ! 7:HN self-cal status=fixed weight=1 selfant 7:LA,true ! 7:LA self-cal status=fixed weight=1 selfant 7:MK,true ! 7:MK self-cal status=fixed weight=1 selfant 7:NL,true ! 7:NL self-cal status=fixed weight=1 selfant 7:OV,true ! 7:OV self-cal status=fixed weight=1 selfant 7:PT,true ! 7:PT self-cal status=fixed weight=1 selfant 7:SC,true ! 7:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.323883Jy sigma=3.069131 ! Fit after self-cal, rms=0.125855Jy sigma=1.666897 selfant "",false ! 1:FT self-cal status=correctable weight=1 ! 1:WZ self-cal status=correctable weight=1 ! 2:FT self-cal status=correctable weight=1 ! 2:NY self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 ! 2:WZ self-cal status=correctable weight=1 ! 3:FT self-cal status=correctable weight=1 ! 3:HN self-cal status=correctable weight=1 ! 3:NY self-cal status=correctable weight=1 ! 3:SC self-cal status=correctable weight=1 ! 3:WZ self-cal status=correctable weight=1 ! 4:FT self-cal status=correctable weight=1 ! 4:HN self-cal status=correctable weight=1 ! 4:NL self-cal status=correctable weight=1 ! 4:NY self-cal status=correctable weight=1 ! 4:SC self-cal status=correctable weight=1 ! 4:WZ self-cal status=correctable weight=1 ! 5:FT self-cal status=correctable weight=1 ! 5:NY self-cal status=correctable weight=1 ! 5:WZ self-cal status=correctable weight=1 ! 6:BR self-cal status=correctable weight=1 ! 6:FD self-cal status=correctable weight=1 ! 6:FT self-cal status=correctable weight=1 ! 6:HN self-cal status=correctable weight=1 ! 6:LA self-cal status=correctable weight=1 ! 6:NL self-cal status=correctable weight=1 ! 6:OV self-cal status=correctable weight=1 ! 6:PT self-cal status=correctable weight=1 ! 6:SC self-cal status=correctable weight=1 ! 6:WZ self-cal status=correctable weight=1 ! 7:BR self-cal status=correctable weight=1 ! 7:FD self-cal status=correctable weight=1 ! 7:FT self-cal status=correctable weight=1 ! 7:HN self-cal status=correctable weight=1 ! 7:LA self-cal status=correctable weight=1 ! 7:MK self-cal status=correctable weight=1 ! 7:NL self-cal status=correctable weight=1 ! 7:OV self-cal status=correctable weight=1 ! 7:PT self-cal status=correctable weight=1 ! 7:SC self-cal status=correctable weight=1 ! 8:MA self-cal status=correctable weight=1 ! 8:NY self-cal status=correctable weight=1 ! 8:WZ self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.125855Jy sigma=1.666897 ! Fit after self-cal, rms=0.108061Jy sigma=1.494560 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=6.179 mas, bpa=-8.618 degrees ! Estimated noise=1.20968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.43868e-05 Jy ! Component: 100 - total flux cleaned = -0.000925549 Jy ! Component: 150 - total flux cleaned = -0.00166388 Jy ! Component: 200 - total flux cleaned = -0.0016827 Jy ! Total flux subtracted in 200 components = -0.0016827 Jy ! Clean residual min=-0.011993 max=0.009118 Jy/beam ! Clean residual mean=-0.000029 rms=0.002600 Jy/beam ! Combined flux in latest and established models = 1.35422 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 155 components and 1.35422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105176Jy sigma=1.479439 ! Fit after self-cal, rms=0.104749Jy sigma=1.466706 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=7.078 mas, bpa=-9.58 degrees ! Estimated noise=0.902928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175614 Jy ! Component: 100 - total flux cleaned = -0.00115493 Jy ! Component: 150 - total flux cleaned = -0.0011498 Jy ! Component: 200 - total flux cleaned = -0.00114756 Jy ! Component: 250 - total flux cleaned = -0.0012657 Jy ! Component: 300 - total flux cleaned = -0.00137969 Jy ! Component: 350 - total flux cleaned = -0.00138108 Jy ! Component: 400 - total flux cleaned = -0.00138461 Jy ! Total flux subtracted in 400 components = -0.00138461 Jy ! Clean residual min=-0.008101 max=0.006863 Jy/beam ! Clean residual mean=-0.000055 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 1.35283 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 180 components and 1.35283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103335Jy sigma=1.456769 ! Fit after self-cal, rms=0.103341Jy sigma=1.456193 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000746475 Jy ! Component: 100 - total flux cleaned = -0.000745279 Jy ! Component: 150 - total flux cleaned = -0.000745007 Jy ! Component: 200 - total flux cleaned = -0.000839788 Jy ! Component: 250 - total flux cleaned = -0.000839137 Jy ! Component: 300 - total flux cleaned = -0.000928732 Jy ! Component: 350 - total flux cleaned = -0.000927687 Jy ! Component: 400 - total flux cleaned = -0.00101226 Jy ! Total flux subtracted in 400 components = -0.00101226 Jy ! Clean residual min=-0.007891 max=0.006893 Jy/beam ! Clean residual mean=-0.000055 rms=0.001852 Jy/beam ! Combined flux in latest and established models = 1.35182 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 1.35182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102589Jy sigma=1.451815 ! Fit after self-cal, rms=0.102595Jy sigma=1.451467 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 6 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 3 telescope corrections were flagged in sub-array 6. ! A total of 3 telescope corrections were flagged in sub-array 7. ! A total of 9 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=0.298235Jy sigma=2.654853 ! Fit after self-cal, rms=0.102603Jy sigma=1.445990 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.75 mas, bmaj=7.084 mas, bpa=-9.569 degrees ! Estimated noise=0.901696 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195588 Jy ! Component: 100 - total flux cleaned = -0.00254991 Jy ! Component: 150 - total flux cleaned = -0.00255193 Jy ! Component: 200 - total flux cleaned = -0.00283442 Jy ! Component: 250 - total flux cleaned = -0.00274525 Jy ! Component: 300 - total flux cleaned = -0.00274624 Jy ! Component: 350 - total flux cleaned = -0.00259342 Jy ! Component: 400 - total flux cleaned = -0.00252335 Jy ! Total flux subtracted in 400 components = -0.00252335 Jy ! Clean residual min=-0.007760 max=0.006698 Jy/beam ! Clean residual mean=-0.000056 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 1.3493 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 204 components and 1.3493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101588Jy sigma=1.443365 ! Fit after self-cal, rms=0.101604Jy sigma=1.443061 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406899 Jy ! Component: 100 - total flux cleaned = -0.000479908 Jy ! Component: 150 - total flux cleaned = -0.00041302 Jy ! Component: 200 - total flux cleaned = -0.000475208 Jy ! Component: 250 - total flux cleaned = -0.000475107 Jy ! Component: 300 - total flux cleaned = -0.000416921 Jy ! Component: 350 - total flux cleaned = -0.000418745 Jy ! Component: 400 - total flux cleaned = -0.000420143 Jy ! Total flux subtracted in 400 components = -0.000420143 Jy ! Clean residual min=-0.007703 max=0.006703 Jy/beam ! Clean residual mean=-0.000055 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 1.34888 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 216 components and 1.34888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101218Jy sigma=1.441288 ! Fit after self-cal, rms=0.101224Jy sigma=1.441072 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101224Jy sigma=1.441072 ! Fit after self-cal, rms=0.082818Jy sigma=1.298409 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=7.089 mas, bpa=-9.554 degrees ! Estimated noise=0.902101 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011963 Jy ! Component: 100 - total flux cleaned = 0.00148377 Jy ! Component: 150 - total flux cleaned = 0.00186522 Jy ! Component: 200 - total flux cleaned = 0.00204506 Jy ! Component: 250 - total flux cleaned = 0.00227282 Jy ! Component: 300 - total flux cleaned = 0.00243539 Jy ! Component: 350 - total flux cleaned = 0.00253961 Jy ! Component: 400 - total flux cleaned = 0.00269178 Jy ! Total flux subtracted in 400 components = 0.00269178 Jy ! Clean residual min=-0.003884 max=0.004764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 1.35157 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 227 components and 1.35157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082496Jy sigma=1.295193 ! Fit after self-cal, rms=0.082558Jy sigma=1.295004 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.4, 20.4). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258418 Jy ! Component: 100 - total flux cleaned = 0.00268229 Jy ! Component: 150 - total flux cleaned = 0.00286839 Jy ! Component: 200 - total flux cleaned = 0.00287493 Jy ! Component: 250 - total flux cleaned = 0.00287633 Jy ! Component: 300 - total flux cleaned = 0.00280081 Jy ! Component: 350 - total flux cleaned = 0.00273045 Jy ! Component: 400 - total flux cleaned = 0.00273186 Jy ! Total flux subtracted in 400 components = 0.00273186 Jy ! Clean residual min=-0.003662 max=0.003686 Jy/beam ! Clean residual mean=-0.000000 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 1.3543 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 261 components and 1.3543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082008Jy sigma=1.285094 ! Fit after self-cal, rms=0.081995Jy sigma=1.284738 ! Inverting map ! Added new window around map position (-24.4, 0.8). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122607 Jy ! Component: 100 - total flux cleaned = 0.00132884 Jy ! Component: 150 - total flux cleaned = 0.00169174 Jy ! Component: 200 - total flux cleaned = 0.00218936 Jy ! Component: 250 - total flux cleaned = 0.00272205 Jy ! Component: 300 - total flux cleaned = 0.00314604 Jy ! Component: 350 - total flux cleaned = 0.00355057 Jy ! Component: 400 - total flux cleaned = 0.00387152 Jy ! Total flux subtracted in 400 components = 0.00387152 Jy ! Clean residual min=-0.003415 max=0.003307 Jy/beam ! Clean residual mean=0.000002 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 1.35817 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 295 components and 1.35817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081449Jy sigma=1.275925 ! Fit after self-cal, rms=0.081406Jy sigma=1.275550 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081406Jy sigma=1.275550 ! Fit after self-cal, rms=0.080579Jy sigma=1.261611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.354 mas, bmaj=10.31 mas, bpa=-5.754 degrees ! Estimated noise=1.06415 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970849 Jy ! Component: 100 - total flux cleaned = 0.00157639 Jy ! Component: 150 - total flux cleaned = 0.00179841 Jy ! Component: 200 - total flux cleaned = 0.00200594 Jy ! Component: 250 - total flux cleaned = 0.00216153 Jy ! Component: 300 - total flux cleaned = 0.00238426 Jy ! Component: 350 - total flux cleaned = 0.00259288 Jy ! Component: 400 - total flux cleaned = 0.00269392 Jy ! Total flux subtracted in 400 components = 0.00269392 Jy ! Clean residual min=-0.003183 max=0.002670 Jy/beam ! Clean residual mean=0.000000 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 1.36087 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 338 components and 1.36087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080544Jy sigma=1.259482 ! Fit after self-cal, rms=0.080530Jy sigma=1.259353 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492452 Jy ! Component: 100 - total flux cleaned = 0.000684979 Jy ! Component: 150 - total flux cleaned = 0.000837391 Jy ! Component: 200 - total flux cleaned = 0.000984392 Jy ! Component: 250 - total flux cleaned = 0.00112693 Jy ! Component: 300 - total flux cleaned = 0.00120933 Jy ! Component: 350 - total flux cleaned = 0.00128969 Jy ! Component: 400 - total flux cleaned = 0.00136696 Jy ! Total flux subtracted in 400 components = 0.00136696 Jy ! Clean residual min=-0.003187 max=0.002646 Jy/beam ! Clean residual mean=-0.000000 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 1.36223 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 369 components and 1.36223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080512Jy sigma=1.258496 ! Fit after self-cal, rms=0.080504Jy sigma=1.258454 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.088 mas, bpa=-9.548 degrees ! Estimated noise=0.901945 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.747 x 7.088 at -9.548 degrees (North through East) ! Clean map min=-0.0060674 max=1.2077 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080504Jy sigma=1.258454 ! Fit after self-cal, rms=0.076897Jy sigma=1.138601 ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.09 mas, bpa=-9.553 degrees ! Estimated noise=0.902068 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638076 Jy ! Component: 100 - total flux cleaned = 0.00064012 Jy ! Component: 150 - total flux cleaned = 0.000578436 Jy ! Component: 200 - total flux cleaned = 0.000581214 Jy ! Component: 250 - total flux cleaned = 0.000582419 Jy ! Component: 300 - total flux cleaned = 0.000638303 Jy ! Component: 350 - total flux cleaned = 0.000690703 Jy ! Component: 400 - total flux cleaned = 0.00068946 Jy ! Total flux subtracted in 400 components = 0.00068946 Jy ! Clean residual min=-0.003441 max=0.003121 Jy/beam ! Clean residual mean=-0.000000 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 1.36292 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 393 components and 1.36292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076587Jy sigma=1.135383 ! Fit after self-cal, rms=0.076567Jy sigma=1.135264 ! Inverting map ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329324 Jy ! Component: 100 - total flux cleaned = 0.000480199 Jy ! Component: 150 - total flux cleaned = 0.000528282 Jy ! Component: 200 - total flux cleaned = 0.000479751 Jy ! Component: 250 - total flux cleaned = 0.000526019 Jy ! Component: 300 - total flux cleaned = 0.00057223 Jy ! Component: 350 - total flux cleaned = 0.000704785 Jy ! Component: 400 - total flux cleaned = 0.00074722 Jy ! Total flux subtracted in 400 components = 0.00074722 Jy ! Clean residual min=-0.003417 max=0.003051 Jy/beam ! Clean residual mean=-0.000000 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 1.36367 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 410 components and 1.36367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076374Jy sigma=1.133311 ! Fit after self-cal, rms=0.076364Jy sigma=1.133243 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076364Jy sigma=1.133243 ! Fit after self-cal, rms=0.076408Jy sigma=1.132900 print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.349 mas, bmaj=6.185 mas, bpa=-8.605 degrees ! Estimated noise=1.20889 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.922566 Jy ! Component: 100 - total flux cleaned = 1.14518 Jy ! Component: 150 - total flux cleaned = 1.23231 Jy ! Component: 200 - total flux cleaned = 1.27521 Jy ! Component: 250 - total flux cleaned = 1.30157 Jy ! Component: 300 - total flux cleaned = 1.31972 Jy ! Component: 350 - total flux cleaned = 1.33149 Jy ! Component: 400 - total flux cleaned = 1.34077 Jy ! Total flux subtracted in 400 components = 1.34077 Jy ! Clean residual min=-0.009966 max=0.008709 Jy/beam ! Clean residual mean=-0.000008 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 1.34077 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 1.34077 Jy ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.09 mas, bpa=-9.544 degrees ! Estimated noise=0.901934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00893077 Jy ! Component: 100 - total flux cleaned = 0.0140474 Jy ! Component: 150 - total flux cleaned = 0.0172447 Jy ! Component: 200 - total flux cleaned = 0.0200902 Jy ! Component: 250 - total flux cleaned = 0.0213836 Jy ! Component: 300 - total flux cleaned = 0.0222441 Jy ! Component: 350 - total flux cleaned = 0.0228856 Jy ! Component: 400 - total flux cleaned = 0.0233478 Jy ! Total flux subtracted in 400 components = 0.0233478 Jy ! Clean residual min=-0.005055 max=0.004790 Jy/beam ! Clean residual mean=-0.000007 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 1.36412 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 87 components and 1.36412 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.353 mas, bmaj=10.31 mas, bpa=-5.756 degrees ! Estimated noise=1.06432 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062054 Jy ! Component: 100 - total flux cleaned = 0.00161801 Jy ! Component: 150 - total flux cleaned = 0.00190995 Jy ! Component: 200 - total flux cleaned = 0.00199895 Jy ! Component: 250 - total flux cleaned = 0.00215102 Jy ! Component: 300 - total flux cleaned = 0.00215181 Jy ! Component: 350 - total flux cleaned = 0.00189873 Jy ! Component: 400 - total flux cleaned = 0.00177857 Jy ! Total flux subtracted in 400 components = 0.00177857 Jy ! Clean residual min=-0.003400 max=0.003187 Jy/beam ! Clean residual mean=-0.000007 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 1.36589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.83113e-05 Jy ! Component: 100 - total flux cleaned = -5.94308e-05 Jy ! Component: 150 - total flux cleaned = -5.97633e-05 Jy ! Component: 200 - total flux cleaned = -5.94007e-05 Jy ! Component: 250 - total flux cleaned = -5.86618e-05 Jy ! Component: 300 - total flux cleaned = -1.27168e-05 Jy ! Component: 350 - total flux cleaned = -1.32227e-05 Jy ! Component: 400 - total flux cleaned = -5.56852e-05 Jy ! Total flux subtracted in 400 components = -5.56852e-05 Jy ! Clean residual min=-0.003099 max=0.002861 Jy/beam ! Clean residual mean=-0.000005 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 1.36584 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 183 components and 1.36584 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=7.09 mas, bpa=-9.544 degrees ! Estimated noise=0.901934 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015719 Jy ! Component: 100 - total flux cleaned = 0.00130237 Jy ! Component: 150 - total flux cleaned = 0.000914079 Jy ! Component: 200 - total flux cleaned = 0.00067734 Jy ! Component: 250 - total flux cleaned = 0.000567598 Jy ! Component: 300 - total flux cleaned = 0.000462353 Jy ! Component: 350 - total flux cleaned = 0.000255629 Jy ! Component: 400 - total flux cleaned = 0.000357308 Jy ! Total flux subtracted in 400 components = 0.000357308 Jy ! Clean residual min=-0.003583 max=0.003737 Jy/beam ! Clean residual mean=-0.000002 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 1.3662 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 213 components and 1.3662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077840Jy sigma=1.156723 ! Fit after self-cal, rms=0.077738Jy sigma=1.154993 wmodel /scr/pima/rdv93_uvs/J1549+0237_S_map.mod ! Writing 213 model components to file: /scr/pima/rdv93_uvs/J1549+0237_S_map.mod wobs /scr/pima/rdv93_uvs/J1549+0237_S_uvs.fits ! Applying 1034 buffered edits. ! Writing UV FITS file: /scr/pima/rdv93_uvs/J1549+0237_S_uvs.fits wwins /scr/pima/rdv93_uvs/J1549+0237_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv93_uvs/J1549+0237_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342119 Jy ! Component: 100 - total flux cleaned = -2.69947e-05 Jy ! Component: 150 - total flux cleaned = -0.000264783 Jy ! Component: 200 - total flux cleaned = -0.00060818 Jy ! Component: 250 - total flux cleaned = -0.000938775 Jy ! Component: 300 - total flux cleaned = -0.00115351 Jy ! Component: 350 - total flux cleaned = -0.00131279 Jy ! Component: 400 - total flux cleaned = -0.00167593 Jy ! Component: 450 - total flux cleaned = -0.00162424 Jy ! Component: 500 - total flux cleaned = -0.00187608 Jy ! Component: 550 - total flux cleaned = -0.0020241 Jy ! Component: 600 - total flux cleaned = -0.0021695 Jy ! Component: 650 - total flux cleaned = -0.00240897 Jy ! Component: 700 - total flux cleaned = -0.00240808 Jy ! Component: 750 - total flux cleaned = -0.00254762 Jy ! Component: 800 - total flux cleaned = -0.00245467 Jy ! Component: 850 - total flux cleaned = -0.00245455 Jy ! Component: 900 - total flux cleaned = -0.0023647 Jy ! Component: 950 - total flux cleaned = -0.00240957 Jy ! Component: 1000 - total flux cleaned = -0.0023649 Jy ! Component: 1050 - total flux cleaned = -0.00227726 Jy ! Component: 1100 - total flux cleaned = -0.00214705 Jy ! Component: 1150 - total flux cleaned = -0.00201854 Jy ! Component: 1200 - total flux cleaned = -0.0020184 Jy ! Component: 1250 - total flux cleaned = -0.00172382 Jy ! Component: 1300 - total flux cleaned = -0.00176589 Jy ! Component: 1350 - total flux cleaned = -0.00172376 Jy ! Component: 1400 - total flux cleaned = -0.00168234 Jy ! Component: 1450 - total flux cleaned = -0.00152011 Jy ! Component: 1500 - total flux cleaned = -0.0016011 Jy ! Component: 1550 - total flux cleaned = -0.00140078 Jy ! Component: 1600 - total flux cleaned = -0.00140033 Jy ! Component: 1650 - total flux cleaned = -0.00136131 Jy ! Component: 1700 - total flux cleaned = -0.0012441 Jy ! Component: 1750 - total flux cleaned = -0.00124455 Jy ! Component: 1800 - total flux cleaned = -0.00105202 Jy ! Component: 1850 - total flux cleaned = -0.00109023 Jy ! Component: 1900 - total flux cleaned = -0.00116609 Jy ! Component: 1950 - total flux cleaned = -0.00124154 Jy ! Component: 2000 - total flux cleaned = -0.00120411 Jy ! Component: 2050 - total flux cleaned = -0.00116739 Jy ! Component: 2100 - total flux cleaned = -0.0010937 Jy ! Component: 2150 - total flux cleaned = -0.0010572 Jy ! Component: 2200 - total flux cleaned = -0.00105712 Jy ! Component: 2250 - total flux cleaned = -0.000984834 Jy ! Component: 2300 - total flux cleaned = -0.000984695 Jy ! Component: 2350 - total flux cleaned = -0.000984702 Jy ! Component: 2400 - total flux cleaned = -0.000913835 Jy ! Component: 2450 - total flux cleaned = -0.00108963 Jy ! Component: 2500 - total flux cleaned = -0.00112462 Jy ! Component: 2550 - total flux cleaned = -0.00115918 Jy ! Component: 2600 - total flux cleaned = -0.00108992 Jy ! Component: 2650 - total flux cleaned = -0.00105558 Jy ! Component: 2700 - total flux cleaned = -0.00105567 Jy ! Component: 2750 - total flux cleaned = -0.00108964 Jy ! Component: 2800 - total flux cleaned = -0.000988303 Jy ! Component: 2850 - total flux cleaned = -0.000954872 Jy ! Component: 2900 - total flux cleaned = -0.00098852 Jy ! Component: 2950 - total flux cleaned = -0.00102162 Jy ! Component: 3000 - total flux cleaned = -0.000922234 Jy ! Component: 3050 - total flux cleaned = -0.000889326 Jy ! Component: 3100 - total flux cleaned = -0.0008895 Jy ! Component: 3150 - total flux cleaned = -0.000759334 Jy ! Component: 3200 - total flux cleaned = -0.000889005 Jy ! Component: 3250 - total flux cleaned = -0.000695782 Jy ! Component: 3300 - total flux cleaned = -0.000695712 Jy ! Component: 3350 - total flux cleaned = -0.000663682 Jy ! Component: 3400 - total flux cleaned = -0.000378065 Jy ! Component: 3450 - total flux cleaned = -0.000346482 Jy ! Component: 3500 - total flux cleaned = -0.000220861 Jy ! Component: 3550 - total flux cleaned = -0.000252049 Jy ! Component: 3600 - total flux cleaned = -3.47132e-05 Jy ! Component: 3650 - total flux cleaned = -6.56054e-05 Jy ! Component: 3700 - total flux cleaned = 2.66989e-05 Jy ! Component: 3750 - total flux cleaned = 0.000118664 Jy ! Component: 3800 - total flux cleaned = 0.000179635 Jy ! Component: 3850 - total flux cleaned = 0.000300865 Jy ! Component: 3900 - total flux cleaned = 0.000361187 Jy ! Component: 3950 - total flux cleaned = 0.000271093 Jy ! Component: 4000 - total flux cleaned = 0.000330988 Jy ! Component: 4050 - total flux cleaned = 0.000360925 Jy ! Total flux subtracted in 4096 components = 0.000479249 Jy ! Clean residual min=-0.001798 max=0.001821 Jy/beam ! Clean residual mean=0.000005 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 1.36668 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 467 components and 1.36668 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv93_uvs/J1549+0237_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.747 x 7.09 at -9.544 degrees (North through East) ! Clean map min=-0.0033562 max=1.2035 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J1549+0237_S_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 1.2034 rms= 0.00052 Jy quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J1549+0237_S_uvs.log closed on Tue Oct 8 15:30:57 2013