! Started logfile: /scr/pima/rdv93_uvs/J0356+6043_X_uvs.log on Tue Oct 8 15:43:41 2013 obs /scr/pima/rdv93_uvs/J0356+6043_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J0356+6043_X_uva.fits ! AN table 1: 19 integrations on 36 of 36 possible baselines. ! AN table 2: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0356+6043 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47599e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79099e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89599e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5976 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/rdv_muppet /scr/pima/rdv93_uvs/J0356+6043_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 800000 float soltime2 soltime2 = 15 float soltime3 soltime3 = 1 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float old_peak float new_peak float flux_cutoff selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 system "rm /tmp/ff.ff" mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.055854Jy sigma=7.022731 ! Fit after self-cal, rms=0.656575Jy sigma=4.175306 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. print "=== Flag out IVS stations" ! === Flag out IVS stations integer lun string cfg_file lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_flag_process.csh /tmp/ff.ff" ![@/tmp/ff.ff \] ![Exited script file: /tmp/ff.ff] uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8006 mas, bmaj=1.217 mas, bpa=-87 degrees ! Estimated noise=2.8446 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267915 Jy ! Component: 100 - total flux cleaned = 0.329871 Jy ! Total flux subtracted in 100 components = 0.329871 Jy ! Clean residual min=-0.008860 max=0.023609 Jy/beam ! Clean residual mean=0.000057 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 0.329871 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.329871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078255Jy sigma=0.512494 ! Fit after self-cal, rms=0.078267Jy sigma=0.512155 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262355 Jy ! Component: 100 - total flux cleaned = 0.0396842 Jy ! Total flux subtracted in 100 components = 0.0396842 Jy ! Clean residual min=-0.006858 max=0.009092 Jy/beam ! Clean residual mean=0.000028 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.369555 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.369555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068414Jy sigma=0.399760 ! Fit after self-cal, rms=0.068368Jy sigma=0.399323 ! Inverting map print "=== Finished uniform weighting clean ===" ! === Finished uniform weighting clean === uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.1 mas, bmaj=1.582 mas, bpa=88.31 degrees ! Estimated noise=1.46762 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141912 Jy ! Component: 100 - total flux cleaned = 0.0213399 Jy ! Component: 150 - total flux cleaned = 0.0259957 Jy ! Component: 200 - total flux cleaned = 0.0282119 Jy ! Total flux subtracted in 200 components = 0.0282119 Jy ! Clean residual min=-0.005250 max=0.005835 Jy/beam ! Clean residual mean=0.000022 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.397767 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 31 components and 0.397767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066175Jy sigma=0.372136 ! Fit after self-cal, rms=0.066019Jy sigma=0.371225 ! Inverting map print "=== Finished natural weighting clean for VLBI sites ===" ! === Finished natural weighting clean for VLBI sites === gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.94 LA 1.02 ! MK 0.97 NL 0.97 OV 0.98 PT 0.99 ! SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 0.97 KP 1.02 ! LA 1.02 MK 1.18 NL 0.93 OV 0.99 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.96 LA 0.98 ! MK 0.98 NL 0.97 OV 0.97 PT 1.00 ! SC 1.17 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 HN 0.99 KP 0.96 ! LA 0.97 MK 1.22 NL 0.95 OV 0.98 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.99 LA 1.05 ! MK 0.96 NL 1.01 OV 1.02 PT 0.98 ! SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 1.03 KP 0.87 ! LA 1.04 MK 1.15 NL 1.00 OV 1.05 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.97 LA 1.02 ! MK 1.03 NL 1.06 OV 0.98 PT 1.02 ! SC 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.05 HN 1.02 KP 0.91 ! LA 1.02 MK 1.24 NL 1.02 OV 1.00 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.066019Jy sigma=0.371225 ! Fit after self-cal, rms=0.063926Jy sigma=0.339513 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.588 mas, bpa=88.75 degrees ! Estimated noise=1.46229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308408 Jy ! Component: 100 - total flux cleaned = 0.00378769 Jy ! Component: 150 - total flux cleaned = 0.00397382 Jy ! Component: 200 - total flux cleaned = 0.00398103 Jy ! Total flux subtracted in 200 components = 0.00398103 Jy ! Clean residual min=-0.002046 max=0.002299 Jy/beam ! Clean residual mean=0.000010 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.401748 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.401748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063702Jy sigma=0.337988 ! Fit after self-cal, rms=0.063717Jy sigma=0.337880 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063717Jy sigma=0.337880 ! Fit after self-cal, rms=0.063671Jy sigma=0.337762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=1.588 mas, bpa=88.8 degrees ! Estimated noise=1.46116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956229 Jy ! Component: 100 - total flux cleaned = 0.00108635 Jy ! Component: 150 - total flux cleaned = 0.00123089 Jy ! Component: 200 - total flux cleaned = 0.00119967 Jy ! Total flux subtracted in 200 components = 0.00119967 Jy ! Clean residual min=-0.002016 max=0.002227 Jy/beam ! Clean residual mean=0.000005 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.402947 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 72 components and 0.402947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063603Jy sigma=0.337448 ! Fit after self-cal, rms=0.063595Jy sigma=0.337421 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130367 Jy ! Component: 100 - total flux cleaned = 0.00198389 Jy ! Component: 150 - total flux cleaned = 0.00232961 Jy ! Component: 200 - total flux cleaned = 0.0026604 Jy ! Total flux subtracted in 200 components = 0.0026604 Jy ! Clean residual min=-0.001826 max=0.001889 Jy/beam ! Clean residual mean=0.000009 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.405608 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.405608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063489Jy sigma=0.336858 ! Fit after self-cal, rms=0.063482Jy sigma=0.336816 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063482Jy sigma=0.336816 ! Fit after self-cal, rms=0.063462Jy sigma=0.336656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.588 mas, bpa=88.81 degrees ! Estimated noise=1.46054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000992223 Jy ! Component: 100 - total flux cleaned = 0.00152306 Jy ! Component: 150 - total flux cleaned = 0.00183651 Jy ! Component: 200 - total flux cleaned = 0.00209194 Jy ! Total flux subtracted in 200 components = 0.00209194 Jy ! Clean residual min=-0.001734 max=0.001818 Jy/beam ! Clean residual mean=0.000006 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.4077 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 105 components and 0.4077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063415Jy sigma=0.336439 ! Fit after self-cal, rms=0.063412Jy sigma=0.336429 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332568 Jy ! Component: 100 - total flux cleaned = 0.000559376 Jy ! Component: 150 - total flux cleaned = 0.000770083 Jy ! Component: 200 - total flux cleaned = 0.000923162 Jy ! Total flux subtracted in 200 components = 0.000923162 Jy ! Clean residual min=-0.001715 max=0.001800 Jy/beam ! Clean residual mean=0.000007 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.408623 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 113 components and 0.408623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063384Jy sigma=0.336341 ! Fit after self-cal, rms=0.063382Jy sigma=0.336337 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063382Jy sigma=0.336337 ! Fit after self-cal, rms=0.063370Jy sigma=0.336239 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=2.851 mas, bpa=74.33 degrees ! Estimated noise=1.57329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360564 Jy ! Component: 100 - total flux cleaned = 0.000721381 Jy ! Component: 150 - total flux cleaned = 0.000973629 Jy ! Component: 200 - total flux cleaned = 0.00115568 Jy ! Total flux subtracted in 200 components = 0.00115568 Jy ! Clean residual min=-0.001736 max=0.001739 Jy/beam ! Clean residual mean=0.000010 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.409779 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.409779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063357Jy sigma=0.336181 ! Fit after self-cal, rms=0.063353Jy sigma=0.336171 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88505e-05 Jy ! Component: 100 - total flux cleaned = 0.000220632 Jy ! Component: 150 - total flux cleaned = 0.000310238 Jy ! Component: 200 - total flux cleaned = 0.000355988 Jy ! Total flux subtracted in 200 components = 0.000355988 Jy ! Clean residual min=-0.001724 max=0.001730 Jy/beam ! Clean residual mean=0.000011 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.410135 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 140 components and 0.410135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063348Jy sigma=0.336150 ! Fit after self-cal, rms=0.063345Jy sigma=0.336145 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for VLBA stations ===" ! === Finished amplitude self-cal for VLBA stations === unflag * ! Unflagging all baselines in the currently selected channels. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. integer lun lun = outfile ( "/tmp/ff.ff" ) do i=1,nsub do j=1,ntel(i) fprintf lun, "%s\n", telname(j,i) end do end do close ( lun ) system "/home/lpetrov/bin/dimap_selfant_process.csh /tmp/ff.ff" ![@/tmp/ff.ff] selfant 1:BR,true ! 1:BR self-cal status=fixed weight=1 selfant 1:FD,true ! 1:FD self-cal status=fixed weight=1 selfant 1:HN,true ! 1:HN self-cal status=fixed weight=1 selfant 1:LA,true ! 1:LA self-cal status=fixed weight=1 selfant 1:MK,true ! 1:MK self-cal status=fixed weight=1 selfant 1:NL,true ! 1:NL self-cal status=fixed weight=1 selfant 1:OV,true ! 1:OV self-cal status=fixed weight=1 selfant 1:PT,true ! 1:PT self-cal status=fixed weight=1 selfant 1:SC,true ! 1:SC self-cal status=fixed weight=1 selfant 2:BR,true ! 2:BR self-cal status=fixed weight=1 selfant 2:FD,true ! 2:FD self-cal status=fixed weight=1 selfant 2:HN,true ! 2:HN self-cal status=fixed weight=1 selfant 2:KP,true ! 2:KP self-cal status=fixed weight=1 selfant 2:LA,true ! 2:LA self-cal status=fixed weight=1 selfant 2:MK,true ! 2:MK self-cal status=fixed weight=1 selfant 2:NL,true ! 2:NL self-cal status=fixed weight=1 selfant 2:OV,true ! 2:OV self-cal status=fixed weight=1 selfant 2:PT,true ! 2:PT self-cal status=fixed weight=1 selfant 2:SC,true ! 2:SC self-cal status=fixed weight=1 ![Exited script file: /tmp/ff.ff] selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063345Jy sigma=0.336145 ! Fit after self-cal, rms=0.063345Jy sigma=0.336145 selfant "",false ! 1:BR self-cal status=correctable weight=1 ! 1:FD self-cal status=correctable weight=1 ! 1:HN self-cal status=correctable weight=1 ! 1:LA self-cal status=correctable weight=1 ! 1:MK self-cal status=correctable weight=1 ! 1:NL self-cal status=correctable weight=1 ! 1:OV self-cal status=correctable weight=1 ! 1:PT self-cal status=correctable weight=1 ! 1:SC self-cal status=correctable weight=1 ! 2:BR self-cal status=correctable weight=1 ! 2:FD self-cal status=correctable weight=1 ! 2:HN self-cal status=correctable weight=1 ! 2:KP self-cal status=correctable weight=1 ! 2:LA self-cal status=correctable weight=1 ! 2:MK self-cal status=correctable weight=1 ! 2:NL self-cal status=correctable weight=1 ! 2:OV self-cal status=correctable weight=1 ! 2:PT self-cal status=correctable weight=1 ! 2:SC self-cal status=correctable weight=1 selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063345Jy sigma=0.336145 ! Fit after self-cal, rms=0.063306Jy sigma=0.336119 uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8041 mas, bmaj=1.225 mas, bpa=-86.1 degrees ! Estimated noise=2.85438 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-38.6, 44.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131123 Jy ! Component: 100 - total flux cleaned = 2.03661e-05 Jy ! Component: 150 - total flux cleaned = -0.000480925 Jy ! Component: 200 - total flux cleaned = -0.00107583 Jy ! Total flux subtracted in 200 components = -0.00107583 Jy ! Clean residual min=-0.003631 max=0.003382 Jy/beam ! Clean residual mean=-0.000001 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.409059 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 158 components and 0.409059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063218Jy sigma=0.336202 ! Fit after self-cal, rms=0.063215Jy sigma=0.336115 ! Inverting map uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.106 mas, bmaj=1.588 mas, bpa=88.91 degrees ! Estimated noise=1.45885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118743 Jy ! Component: 100 - total flux cleaned = 0.000504347 Jy ! Component: 150 - total flux cleaned = 0.000727891 Jy ! Component: 200 - total flux cleaned = 0.000881837 Jy ! Component: 250 - total flux cleaned = 0.00107293 Jy ! Component: 300 - total flux cleaned = 0.0012291 Jy ! Component: 350 - total flux cleaned = 0.00135471 Jy ! Component: 400 - total flux cleaned = 0.00143379 Jy ! Total flux subtracted in 400 components = 0.00143379 Jy ! Clean residual min=-0.001770 max=0.001681 Jy/beam ! Clean residual mean=0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.410493 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 174 components and 0.410493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063155Jy sigma=0.335804 ! Fit after self-cal, rms=0.063151Jy sigma=0.335789 ! Inverting map dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.92282e-05 Jy ! Component: 100 - total flux cleaned = 0.000147157 Jy ! Component: 150 - total flux cleaned = 0.00023831 Jy ! Component: 200 - total flux cleaned = 0.000290203 Jy ! Component: 250 - total flux cleaned = 0.000306852 Jy ! Component: 300 - total flux cleaned = 0.000371294 Jy ! Component: 350 - total flux cleaned = 0.000387098 Jy ! Component: 400 - total flux cleaned = 0.000402265 Jy ! Total flux subtracted in 400 components = 0.000402265 Jy ! Clean residual min=-0.001769 max=0.001689 Jy/beam ! Clean residual mean=0.000004 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.410895 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 191 components and 0.410895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063123Jy sigma=0.335699 ! Fit after self-cal, rms=0.063121Jy sigma=0.335695 ! Inverting map print "=== Finished natural weighting clean for al sites ===" ! === Finished natural weighting clean for al sites === unflag * ! Unflagging all baselines in the currently selected channels. ! Applying 2560 buffered edits. uncalib false, false, true ! uncal: All telescope correction flags have been un-done. selfcal true, true, soltime1 ! Performing amp+phase self-cal over 800000 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063121Jy sigma=0.335695 ! Fit after self-cal, rms=0.063071Jy sigma=0.335647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.589 mas, bpa=88.88 degrees ! Estimated noise=1.45865 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120087 Jy ! Component: 100 - total flux cleaned = -0.000119563 Jy ! Component: 150 - total flux cleaned = -8.64466e-05 Jy ! Component: 200 - total flux cleaned = -5.47477e-05 Jy ! Component: 250 - total flux cleaned = 5.66837e-06 Jy ! Component: 300 - total flux cleaned = 2.01285e-05 Jy ! Component: 350 - total flux cleaned = 3.43567e-05 Jy ! Component: 400 - total flux cleaned = 8.97246e-05 Jy ! Total flux subtracted in 400 components = 8.97246e-05 Jy ! Clean residual min=-0.001738 max=0.001692 Jy/beam ! Clean residual mean=0.000004 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.410985 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 202 components and 0.410985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063045Jy sigma=0.335583 ! Fit after self-cal, rms=0.063045Jy sigma=0.335580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31264e-05 Jy ! Component: 100 - total flux cleaned = 7.76348e-05 Jy ! Component: 150 - total flux cleaned = 9.06543e-05 Jy ! Component: 200 - total flux cleaned = 0.000116229 Jy ! Component: 250 - total flux cleaned = 0.000141735 Jy ! Component: 300 - total flux cleaned = 0.000154282 Jy ! Component: 350 - total flux cleaned = 0.000178764 Jy ! Component: 400 - total flux cleaned = 0.000202209 Jy ! Total flux subtracted in 400 components = 0.000202209 Jy ! Clean residual min=-0.001746 max=0.001693 Jy/beam ! Clean residual mean=0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.411187 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 211 components and 0.411187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063027Jy sigma=0.335540 ! Fit after self-cal, rms=0.063026Jy sigma=0.335539 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 15 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063026Jy sigma=0.335539 ! Fit after self-cal, rms=0.063030Jy sigma=0.335481 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.589 mas, bpa=88.84 degrees ! Estimated noise=1.45851 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201368 Jy ! Component: 100 - total flux cleaned = -0.000175436 Jy ! Component: 150 - total flux cleaned = -0.000150686 Jy ! Component: 200 - total flux cleaned = -0.000126688 Jy ! Component: 250 - total flux cleaned = -0.000126365 Jy ! Component: 300 - total flux cleaned = -9.15383e-05 Jy ! Component: 350 - total flux cleaned = -9.1565e-05 Jy ! Component: 400 - total flux cleaned = -8.02294e-05 Jy ! Total flux subtracted in 400 components = -8.02294e-05 Jy ! Clean residual min=-0.001739 max=0.001719 Jy/beam ! Clean residual mean=0.000004 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.411106 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 218 components and 0.411106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063013Jy sigma=0.335445 ! Fit after self-cal, rms=0.063013Jy sigma=0.335444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.98924e-05 Jy ! Component: 100 - total flux cleaned = 6.19312e-05 Jy ! Component: 150 - total flux cleaned = 7.30205e-05 Jy ! Component: 200 - total flux cleaned = 7.30563e-05 Jy ! Component: 250 - total flux cleaned = 9.4191e-05 Jy ! Component: 300 - total flux cleaned = 0.000104693 Jy ! Component: 350 - total flux cleaned = 0.000114966 Jy ! Component: 400 - total flux cleaned = 0.000115249 Jy ! Total flux subtracted in 400 components = 0.000115249 Jy ! Clean residual min=-0.001743 max=0.001728 Jy/beam ! Clean residual mean=0.000004 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.411222 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 223 components and 0.411222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063000Jy sigma=0.335416 ! Fit after self-cal, rms=0.063000Jy sigma=0.335415 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime3 ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063000Jy sigma=0.335415 ! Fit after self-cal, rms=0.061835Jy sigma=0.329655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=2.851 mas, bpa=74.24 degrees ! Estimated noise=1.56981 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.05983e-06 Jy ! Component: 100 - total flux cleaned = -2.10606e-05 Jy ! Component: 150 - total flux cleaned = -5.38468e-05 Jy ! Component: 200 - total flux cleaned = -7.2547e-05 Jy ! Component: 250 - total flux cleaned = -7.25238e-05 Jy ! Component: 300 - total flux cleaned = -8.06558e-05 Jy ! Component: 350 - total flux cleaned = -0.000103765 Jy ! Component: 400 - total flux cleaned = -0.00011833 Jy ! Total flux subtracted in 400 components = -0.00011833 Jy ! Clean residual min=-0.001670 max=0.001573 Jy/beam ! Clean residual mean=0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.411103 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 236 components and 0.411103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061837Jy sigma=0.329634 ! Fit after self-cal, rms=0.061837Jy sigma=0.329628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.53185e-05 Jy ! Component: 100 - total flux cleaned = 6.79289e-05 Jy ! Component: 150 - total flux cleaned = 6.12809e-05 Jy ! Component: 200 - total flux cleaned = 5.47809e-05 Jy ! Component: 250 - total flux cleaned = 4.2139e-05 Jy ! Component: 300 - total flux cleaned = 3.60949e-05 Jy ! Component: 350 - total flux cleaned = 3.03491e-05 Jy ! Component: 400 - total flux cleaned = 2.46087e-05 Jy ! Total flux subtracted in 400 components = 2.46087e-05 Jy ! Clean residual min=-0.001682 max=0.001586 Jy/beam ! Clean residual mean=0.000005 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.411128 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 248 components and 0.411128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061836Jy sigma=0.329624 ! Fit after self-cal, rms=0.061836Jy sigma=0.329622 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "=== Finished amplitude self-cal for all stations ===" ! === Finished amplitude self-cal for all stations === restore ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.589 mas, bpa=88.83 degrees ! Estimated noise=1.4588 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 1.589 at 88.83 degrees (North through East) ! Clean map min=-0.0016956 max=0.355 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "=== CLearing model and starting over ===" ! === CLearing model and starting over === clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8046 mas, bmaj=1.225 mas, bpa=-86.18 degrees ! Estimated noise=2.85722 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268945 Jy ! Component: 100 - total flux cleaned = 0.330961 Jy ! Component: 150 - total flux cleaned = 0.355586 Jy ! Component: 200 - total flux cleaned = 0.368382 Jy ! Component: 250 - total flux cleaned = 0.375963 Jy ! Component: 300 - total flux cleaned = 0.38034 Jy ! Component: 350 - total flux cleaned = 0.384123 Jy ! Component: 400 - total flux cleaned = 0.387207 Jy ! Total flux subtracted in 400 components = 0.387207 Jy ! Clean residual min=-0.004199 max=0.003721 Jy/beam ! Clean residual mean=0.000007 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.387207 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.387207 Jy ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.589 mas, bpa=88.83 degrees ! Estimated noise=1.4588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055122 Jy ! Component: 100 - total flux cleaned = 0.00908833 Jy ! Component: 150 - total flux cleaned = 0.0117856 Jy ! Component: 200 - total flux cleaned = 0.0136479 Jy ! Component: 250 - total flux cleaned = 0.0152355 Jy ! Component: 300 - total flux cleaned = 0.0166001 Jy ! Component: 350 - total flux cleaned = 0.0177338 Jy ! Component: 400 - total flux cleaned = 0.0186263 Jy ! Total flux subtracted in 400 components = 0.0186263 Jy ! Clean residual min=-0.001790 max=0.001819 Jy/beam ! Clean residual mean=-0.000000 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.405833 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 86 components and 0.405833 Jy ! Inverting map ! Added new window around map position (-34.6, 6). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.65797e-06 Jy ! Component: 100 - total flux cleaned = 0.000389233 Jy ! Component: 150 - total flux cleaned = 0.000838808 Jy ! Component: 200 - total flux cleaned = 0.00117515 Jy ! Component: 250 - total flux cleaned = 0.0014929 Jy ! Component: 300 - total flux cleaned = 0.00175753 Jy ! Component: 350 - total flux cleaned = 0.00204434 Jy ! Component: 400 - total flux cleaned = 0.00231711 Jy ! Total flux subtracted in 400 components = 0.00231711 Jy ! Clean residual min=-0.001618 max=0.001621 Jy/beam ! Clean residual mean=0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.408151 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 116 components and 0.40815 Jy ! Inverting map ! Added new window around map position (0, 51). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000766667 Jy ! Component: 100 - total flux cleaned = 0.00094223 Jy ! Component: 150 - total flux cleaned = 0.0011759 Jy ! Component: 200 - total flux cleaned = 0.00133507 Jy ! Component: 250 - total flux cleaned = 0.0014271 Jy ! Component: 300 - total flux cleaned = 0.0015759 Jy ! Component: 350 - total flux cleaned = 0.0016625 Jy ! Component: 400 - total flux cleaned = 0.00177473 Jy ! Total flux subtracted in 400 components = 0.00177473 Jy ! Clean residual min=-0.001611 max=0.001528 Jy/beam ! Clean residual mean=0.000001 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.409925 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 141 components and 0.409925 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=2.851 mas, bpa=74.24 degrees ! Estimated noise=1.56981 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117477 Jy ! Component: 100 - total flux cleaned = 0.000345604 Jy ! Component: 150 - total flux cleaned = 0.000471213 Jy ! Component: 200 - total flux cleaned = 0.000608591 Jy ! Component: 250 - total flux cleaned = 0.000712558 Jy ! Component: 300 - total flux cleaned = 0.000826298 Jy ! Component: 350 - total flux cleaned = 0.00089613 Jy ! Component: 400 - total flux cleaned = 0.000944948 Jy ! Total flux subtracted in 400 components = 0.000944948 Jy ! Clean residual min=-0.001446 max=0.001523 Jy/beam ! Clean residual mean=0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.41087 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45.2, 33). ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140877 Jy ! Component: 100 - total flux cleaned = 0.00152107 Jy ! Component: 150 - total flux cleaned = 0.00149087 Jy ! Component: 200 - total flux cleaned = 0.00153764 Jy ! Component: 250 - total flux cleaned = 0.00162286 Jy ! Component: 300 - total flux cleaned = 0.00170304 Jy ! Component: 350 - total flux cleaned = 0.00174052 Jy ! Component: 400 - total flux cleaned = 0.00175819 Jy ! Total flux subtracted in 400 components = 0.00175819 Jy ! Clean residual min=-0.001231 max=0.001229 Jy/beam ! Clean residual mean=-0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.412628 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 234 components and 0.412628 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.108 mas, bmaj=1.589 mas, bpa=88.83 degrees ! Estimated noise=1.4588 mJy/beam. ! clean: niter=400 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.75184e-05 Jy ! Component: 100 - total flux cleaned = -0.000164073 Jy ! Component: 150 - total flux cleaned = -0.000198417 Jy ! Component: 200 - total flux cleaned = -0.000198074 Jy ! Component: 250 - total flux cleaned = -0.000197866 Jy ! Component: 300 - total flux cleaned = -0.000228425 Jy ! Component: 350 - total flux cleaned = -0.000197756 Jy ! Component: 400 - total flux cleaned = -8.16972e-05 Jy ! Total flux subtracted in 400 components = -8.16972e-05 Jy ! Clean residual min=-0.001479 max=0.001438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.412547 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 280 components and 0.412547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061589Jy sigma=0.328445 ! Fit after self-cal, rms=0.061571Jy sigma=0.328348 wmodel /scr/pima/rdv93_uvs/J0356+6043_X_map.mod ! Writing 280 model components to file: /scr/pima/rdv93_uvs/J0356+6043_X_map.mod wobs /scr/pima/rdv93_uvs/J0356+6043_X_uvs.fits ! Applying 428 buffered edits. ! Writing UV FITS file: /scr/pima/rdv93_uvs/J0356+6043_X_uvs.fits wwins /scr/pima/rdv93_uvs/J0356+6043_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rdv93_uvs/J0356+6043_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327795 Jy ! Component: 100 - total flux cleaned = -0.000608584 Jy ! Component: 150 - total flux cleaned = -0.000855348 Jy ! Component: 200 - total flux cleaned = -0.000999824 Jy ! Component: 250 - total flux cleaned = -0.00114099 Jy ! Component: 300 - total flux cleaned = -0.00125596 Jy ! Component: 350 - total flux cleaned = -0.00127854 Jy ! Component: 400 - total flux cleaned = -0.00136755 Jy ! Component: 450 - total flux cleaned = -0.00141089 Jy ! Component: 500 - total flux cleaned = -0.0014536 Jy ! Component: 550 - total flux cleaned = -0.00147495 Jy ! Component: 600 - total flux cleaned = -0.00149581 Jy ! Component: 650 - total flux cleaned = -0.00151632 Jy ! Component: 700 - total flux cleaned = -0.00151632 Jy ! Component: 750 - total flux cleaned = -0.00153628 Jy ! Component: 800 - total flux cleaned = -0.00157609 Jy ! Component: 850 - total flux cleaned = -0.00159597 Jy ! Component: 900 - total flux cleaned = -0.00163467 Jy ! Component: 950 - total flux cleaned = -0.00165408 Jy ! Component: 1000 - total flux cleaned = -0.00163501 Jy ! Component: 1050 - total flux cleaned = -0.00165391 Jy ! Component: 1100 - total flux cleaned = -0.00165395 Jy ! Component: 1150 - total flux cleaned = -0.00167235 Jy ! Component: 1200 - total flux cleaned = -0.00161737 Jy ! Component: 1250 - total flux cleaned = -0.00152642 Jy ! Component: 1300 - total flux cleaned = -0.00158068 Jy ! Component: 1350 - total flux cleaned = -0.00163436 Jy ! Component: 1400 - total flux cleaned = -0.00167002 Jy ! Component: 1450 - total flux cleaned = -0.00172281 Jy ! Component: 1500 - total flux cleaned = -0.00161775 Jy ! Component: 1550 - total flux cleaned = -0.00168732 Jy ! Component: 1600 - total flux cleaned = -0.00173914 Jy ! Component: 1650 - total flux cleaned = -0.0017734 Jy ! Component: 1700 - total flux cleaned = -0.00175623 Jy ! Component: 1750 - total flux cleaned = -0.00180679 Jy ! Component: 1800 - total flux cleaned = -0.00180673 Jy ! Component: 1850 - total flux cleaned = -0.00185685 Jy ! Component: 1900 - total flux cleaned = -0.00195616 Jy ! Component: 1950 - total flux cleaned = -0.00189007 Jy ! Component: 2000 - total flux cleaned = -0.00193929 Jy ! Component: 2050 - total flux cleaned = -0.00197191 Jy ! Component: 2100 - total flux cleaned = -0.00200431 Jy ! Component: 2150 - total flux cleaned = -0.00197209 Jy ! Component: 2200 - total flux cleaned = -0.00189199 Jy ! Component: 2250 - total flux cleaned = -0.00195587 Jy ! Component: 2300 - total flux cleaned = -0.00190828 Jy ! Component: 2350 - total flux cleaned = -0.00187684 Jy ! Component: 2400 - total flux cleaned = -0.00195502 Jy ! Component: 2450 - total flux cleaned = -0.00197065 Jy ! Component: 2500 - total flux cleaned = -0.00200148 Jy ! Component: 2550 - total flux cleaned = -0.00198602 Jy ! Component: 2600 - total flux cleaned = -0.00206267 Jy ! Component: 2650 - total flux cleaned = -0.00201692 Jy ! Component: 2700 - total flux cleaned = -0.00207761 Jy ! Component: 2750 - total flux cleaned = -0.0020927 Jy ! Component: 2800 - total flux cleaned = -0.00215255 Jy ! Component: 2850 - total flux cleaned = -0.00216744 Jy ! Component: 2900 - total flux cleaned = -0.00213758 Jy ! Component: 2950 - total flux cleaned = -0.00218203 Jy ! Component: 3000 - total flux cleaned = -0.00218197 Jy ! Component: 3050 - total flux cleaned = -0.00224052 Jy ! Component: 3100 - total flux cleaned = -0.00228424 Jy ! Component: 3150 - total flux cleaned = -0.00226964 Jy ! Component: 3200 - total flux cleaned = -0.00221171 Jy ! Component: 3250 - total flux cleaned = -0.00228377 Jy ! Component: 3300 - total flux cleaned = -0.0023124 Jy ! Component: 3350 - total flux cleaned = -0.00229811 Jy ! Component: 3400 - total flux cleaned = -0.00228384 Jy ! Component: 3450 - total flux cleaned = -0.00234043 Jy ! Component: 3500 - total flux cleaned = -0.00225578 Jy ! Component: 3550 - total flux cleaned = -0.00229797 Jy ! Component: 3600 - total flux cleaned = -0.00225588 Jy ! Component: 3650 - total flux cleaned = -0.00226983 Jy ! Component: 3700 - total flux cleaned = -0.00232538 Jy ! Component: 3750 - total flux cleaned = -0.00222852 Jy ! Component: 3800 - total flux cleaned = -0.00225609 Jy ! Component: 3850 - total flux cleaned = -0.0023247 Jy ! Component: 3900 - total flux cleaned = -0.00231098 Jy ! Component: 3950 - total flux cleaned = -0.00231095 Jy ! Component: 4000 - total flux cleaned = -0.00229738 Jy ! Component: 4050 - total flux cleaned = -0.00231088 Jy ! Total flux subtracted in 4096 components = -0.00227057 Jy ! Clean residual min=-0.000949 max=0.000786 Jy/beam ! Clean residual mean=-0.000001 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.410276 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 599 components and 0.410276 Jy ![Exited script file: /home/lpetrov/bin/rdv_muppet] wmap "/scr/pima/rdv93_uvs/J0356+6043_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.108 x 1.589 at 88.83 degrees (North through East) ! Clean map min=-0.0016974 max=0.35547 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J0356+6043_X_map.fits float peak_flux peak_flux = peak(flux,max) invert ! Inverting map float image_peak image_peak = int(10000*peak_flux)/10000 float image_rms image_rms = int(100000*imstat(rms))/100000 print "=========================================" ! ========================================= print "The image peak= ", image_peak, " rms= ", image_rms, " Jy" ! The image peak= 0.3554 rms= 0.00022 Jy quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J0356+6043_X_uvs.log closed on Tue Oct 8 15:43:47 2013