! Started logfile: /scr/pima/rdv91_uvs/J2358-1020_X_dfm.log on Fri Jun 15 11:30:55 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv91_uvs/J2358-1020_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J2358-1020_X_uva.fits
! AN table 1: 43 integrations on 36 of 36 possible baselines.
! AN table 2: 151 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.701697 visibilities/baseline/integration-bin.
! Found source: J2358-1020
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 16212 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2358-1020_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 184 telescope corrections were flagged in sub-array 1.
!  A total of 468 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 184 telescope corrections were flagged in sub-array 1.
!  A total of 468 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 184 telescope corrections were flagged in sub-array 1.
!  A total of 468 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 184 telescope corrections were flagged in sub-array 1.
!  A total of 468 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.126967Jy  sigma=17.862613
! Fit after  self-cal, rms=0.518407Jy  sigma=8.492701
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5966 mas, bmaj=2.918 mas, bpa=-12.59 degrees
! Estimated noise=0.759693 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.398037 Jy
! Component: 100  -  total flux cleaned = 0.519988 Jy
! Total flux subtracted in 100 components = 0.519988 Jy
! Clean residual min=-0.013789 max=0.051956 Jy/beam
! Clean residual mean=-0.000023 rms=0.003473 Jy/beam
! Combined flux in latest and established models = 0.519988 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.519988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138862Jy  sigma=2.125931
! Fit after  self-cal, rms=0.138246Jy  sigma=2.122459
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.054343 Jy
! Component: 100  -  total flux cleaned = 0.0787446 Jy
! Total flux subtracted in 100 components = 0.0787446 Jy
! Clean residual min=-0.007383 max=0.010667 Jy/beam
! Clean residual mean=-0.000009 rms=0.001622 Jy/beam
! Combined flux in latest and established models = 0.598732 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.598732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120231Jy  sigma=1.808516
! Fit after  self-cal, rms=0.119975Jy  sigma=1.807146
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120178 Jy
! Component: 100  -  total flux cleaned = 0.0193643 Jy
! Total flux subtracted in 100 components = 0.0193643 Jy
! Clean residual min=-0.006836 max=0.007742 Jy/beam
! Clean residual mean=-0.000005 rms=0.001451 Jy/beam
! Combined flux in latest and established models = 0.618097 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 29 components and 0.618097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119681Jy  sigma=1.795958
! Fit after  self-cal, rms=0.119637Jy  sigma=1.795723
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6028 mas, bmaj=3.164 mas, bpa=-10.29 degrees
! Estimated noise=0.441294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00450755 Jy
! Component: 100  -  total flux cleaned = -0.00545979 Jy
! Component: 150  -  total flux cleaned = -0.00559956 Jy
! Component: 200  -  total flux cleaned = -0.00571852 Jy
! Total flux subtracted in 200 components = -0.00571852 Jy
! Clean residual min=-0.008274 max=0.005907 Jy/beam
! Clean residual mean=-0.000010 rms=0.001771 Jy/beam
! Combined flux in latest and established models = 0.612378 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 42 components and 0.612378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119059Jy  sigma=1.787959
! Fit after  self-cal, rms=0.119031Jy  sigma=1.787566
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6028 x 3.164 at -10.29 degrees (North through East)
! Clean map  min=-0.0078456  max=0.49242 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.99     KP        0.97     
!   LA        1.00     MK        0.98     NL        0.97     OV        0.98     
!   PT        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     FT        1.00*    HN        0.99     LA        1.02     
!   NL        1.01     PT        1.02     SC        0.99     WZ        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.96     KP        0.98     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.96     
!   PT        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     FT        1.00*    HN        0.99     LA        1.04     
!   NL        0.99     PT        1.04     SC        0.98     WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.98     KP        0.98     
!   LA        0.98     MK        1.00     NL        0.98     OV        1.02     
!   PT        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     FT        1.00*    HN        0.97     LA        1.03     
!   NL        0.98     PT        1.06     SC        0.98     WZ        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.00     KP        0.99     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     FT        1.00*    HN        0.96     LA        1.02     
!   NL        1.01     PT        1.05     SC        0.97     WZ        1.02     
! 
! 
! Fit before self-cal, rms=0.119031Jy  sigma=1.787566
! Fit after  self-cal, rms=0.118703Jy  sigma=1.762559
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6089 mas, bmaj=3.14 mas, bpa=-10.33 degrees
! Estimated noise=0.443936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171131 Jy
! Component: 100  -  total flux cleaned = 0.00237165 Jy
! Component: 150  -  total flux cleaned = 0.00296872 Jy
! Component: 200  -  total flux cleaned = 0.00324707 Jy
! Total flux subtracted in 200 components = 0.00324707 Jy
! Clean residual min=-0.004015 max=0.003840 Jy/beam
! Clean residual mean=-0.000023 rms=0.001041 Jy/beam
! Combined flux in latest and established models = 0.615625 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 49 components and 0.615625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118581Jy  sigma=1.760874
! Fit after  self-cal, rms=0.118574Jy  sigma=1.760660
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118574Jy  sigma=1.760660
! Fit after  self-cal, rms=0.118501Jy  sigma=1.758370
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6098 mas, bmaj=3.137 mas, bpa=-10.34 degrees
! Estimated noise=0.444188 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000408791 Jy
! Component: 100  -  total flux cleaned = 0.000873939 Jy
! Component: 150  -  total flux cleaned = 0.00121083 Jy
! Component: 200  -  total flux cleaned = 0.00137839 Jy
! Total flux subtracted in 200 components = 0.00137839 Jy
! Clean residual min=-0.003906 max=0.004075 Jy/beam
! Clean residual mean=-0.000023 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.617004 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 0.617004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118447Jy  sigma=1.757615
! Fit after  self-cal, rms=0.118444Jy  sigma=1.757540
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114963 Jy
! Component: 100  -  total flux cleaned = 0.000349261 Jy
! Component: 150  -  total flux cleaned = 0.000453407 Jy
! Component: 200  -  total flux cleaned = 0.0004847 Jy
! Total flux subtracted in 200 components = 0.0004847 Jy
! Clean residual min=-0.003868 max=0.004054 Jy/beam
! Clean residual mean=-0.000023 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.617488 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.617489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118421Jy  sigma=1.757210
! Fit after  self-cal, rms=0.118419Jy  sigma=1.757186
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118419Jy  sigma=1.757186
! Fit after  self-cal, rms=0.118198Jy  sigma=1.747152
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6107 mas, bmaj=3.134 mas, bpa=-10.34 degrees
! Estimated noise=0.444546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308918 Jy
! Component: 100  -  total flux cleaned = 0.000575838 Jy
! Component: 150  -  total flux cleaned = 0.000691257 Jy
! Component: 200  -  total flux cleaned = 0.000691762 Jy
! Total flux subtracted in 200 components = 0.000691762 Jy
! Clean residual min=-0.003479 max=0.003666 Jy/beam
! Clean residual mean=-0.000004 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.61818 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 63 components and 0.61818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118180Jy  sigma=1.746897
! Fit after  self-cal, rms=0.118188Jy  sigma=1.746858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (44.6, 18.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260874 Jy
! Component: 100  -  total flux cleaned = 0.00336795 Jy
! Component: 150  -  total flux cleaned = 0.00370694 Jy
! Component: 200  -  total flux cleaned = 0.00400937 Jy
! Total flux subtracted in 200 components = 0.00400937 Jy
! Clean residual min=-0.003411 max=0.002987 Jy/beam
! Clean residual mean=-0.000000 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.62219 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.62219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118094Jy  sigma=1.745608
! Fit after  self-cal, rms=0.118090Jy  sigma=1.745515
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118090Jy  sigma=1.745515
! Fit after  self-cal, rms=0.118079Jy  sigma=1.745324
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.14 mas, bmaj=3.598 mas, bpa=-16.52 degrees
! Estimated noise=0.591953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222906 Jy
! Component: 100  -  total flux cleaned = 0.00287358 Jy
! Component: 150  -  total flux cleaned = 0.003124 Jy
! Component: 200  -  total flux cleaned = 0.00323988 Jy
! Total flux subtracted in 200 components = 0.00323988 Jy
! Clean residual min=-0.003318 max=0.003034 Jy/beam
! Clean residual mean=0.000006 rms=0.000943 Jy/beam
! Combined flux in latest and established models = 0.62543 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 0.62543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118063Jy  sigma=1.745283
! Fit after  self-cal, rms=0.118060Jy  sigma=1.745174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.66966e-05 Jy
! Component: 100  -  total flux cleaned = 0.000156634 Jy
! Component: 150  -  total flux cleaned = 0.000254483 Jy
! Component: 200  -  total flux cleaned = 0.000334064 Jy
! Total flux subtracted in 200 components = 0.000334064 Jy
! Clean residual min=-0.003303 max=0.003029 Jy/beam
! Clean residual mean=0.000007 rms=0.000933 Jy/beam
! Combined flux in latest and established models = 0.625764 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.625764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118061Jy  sigma=1.745265
! Fit after  self-cal, rms=0.118062Jy  sigma=1.745213
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6111 mas, bmaj=3.134 mas, bpa=-10.34 degrees
! Estimated noise=0.444702 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6111 x 3.134 at -10.34 degrees (North through East)
! Clean map  min=-0.0028727  max=0.49511 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6038 mas, bmaj=2.911 mas, bpa=-12.73 degrees
! Estimated noise=0.750822 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.392495 Jy
! Component: 100  -  total flux cleaned = 0.510513 Jy
! Component: 150  -  total flux cleaned = 0.562311 Jy
! Component: 200  -  total flux cleaned = 0.586344 Jy
! Total flux subtracted in 200 components = 0.586344 Jy
! Clean residual min=-0.005582 max=0.011283 Jy/beam
! Clean residual mean=-0.000009 rms=0.001433 Jy/beam
! Combined flux in latest and established models = 0.586344 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.586344 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6111 mas, bmaj=3.134 mas, bpa=-10.34 degrees
! Estimated noise=0.444702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142834 Jy
! Component: 100  -  total flux cleaned = 0.0221596 Jy
! Component: 150  -  total flux cleaned = 0.0274376 Jy
! Component: 200  -  total flux cleaned = 0.0311211 Jy
! Total flux subtracted in 200 components = 0.0311211 Jy
! Clean residual min=-0.003764 max=0.004901 Jy/beam
! Clean residual mean=-0.000004 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.617465 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 33 components and 0.617465 Jy
! Inverting map 
! Added new window around map position (-1, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359764 Jy
! Component: 100  -  total flux cleaned = 0.00414422 Jy
! Component: 150  -  total flux cleaned = 0.00468644 Jy
! Component: 200  -  total flux cleaned = 0.00508549 Jy
! Total flux subtracted in 200 components = 0.00508549 Jy
! Clean residual min=-0.003391 max=0.002775 Jy/beam
! Clean residual mean=0.000000 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.622551 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 59 components and 0.622551 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.14 mas, bmaj=3.598 mas, bpa=-16.52 degrees
! Estimated noise=0.591953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173048 Jy
! Component: 100  -  total flux cleaned = 0.00237287 Jy
! Component: 150  -  total flux cleaned = 0.00252934 Jy
! Component: 200  -  total flux cleaned = 0.00256326 Jy
! Total flux subtracted in 200 components = 0.00256326 Jy
! Clean residual min=-0.003356 max=0.002856 Jy/beam
! Clean residual mean=0.000006 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.625114 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000150421 Jy
! Component: 100  -  total flux cleaned = 0.000259752 Jy
! Component: 150  -  total flux cleaned = 0.000336584 Jy
! Component: 200  -  total flux cleaned = 0.000385605 Jy
! Total flux subtracted in 200 components = 0.000385605 Jy
! Clean residual min=-0.003281 max=0.002888 Jy/beam
! Clean residual mean=0.000007 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.6255 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 80 components and 0.6255 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6111 mas, bmaj=3.134 mas, bpa=-10.34 degrees
! Estimated noise=0.444702 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000199624 Jy
! Component: 100  -  total flux cleaned = 8.52615e-05 Jy
! Component: 150  -  total flux cleaned = -6.82243e-05 Jy
! Component: 200  -  total flux cleaned = -0.000114696 Jy
! Total flux subtracted in 200 components = -0.000114696 Jy
! Clean residual min=-0.003374 max=0.002596 Jy/beam
! Clean residual mean=0.000003 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 0.625385 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.625385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118010Jy  sigma=1.744400
! Fit after  self-cal, rms=0.117999Jy  sigma=1.744265
wmodel J2358-1020_X_map.mod
! Writing 93 model components to file: J2358-1020_X_map.mod
wobs   J2358-1020_X_uvs.fits
! Writing UV FITS file: J2358-1020_X_uvs.fits
wwins  J2358-1020_X_map.win
! wwins: Wrote 3 windows to J2358-1020_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141243 Jy
! Component: 100  -  total flux cleaned = -0.00233969 Jy
! Component: 150  -  total flux cleaned = -0.00298325 Jy
! Component: 200  -  total flux cleaned = -0.00315964 Jy
! Component: 250  -  total flux cleaned = -0.00337055 Jy
! Component: 300  -  total flux cleaned = -0.00324795 Jy
! Component: 350  -  total flux cleaned = -0.00312912 Jy
! Component: 400  -  total flux cleaned = -0.00301353 Jy
! Component: 450  -  total flux cleaned = -0.00282567 Jy
! Component: 500  -  total flux cleaned = -0.00275193 Jy
! Component: 550  -  total flux cleaned = -0.00249705 Jy
! Component: 600  -  total flux cleaned = -0.00242553 Jy
! Component: 650  -  total flux cleaned = -0.00217924 Jy
! Component: 700  -  total flux cleaned = -0.00214484 Jy
! Component: 750  -  total flux cleaned = -0.00194086 Jy
! Component: 800  -  total flux cleaned = -0.00197422 Jy
! Component: 850  -  total flux cleaned = -0.00194032 Jy
! Component: 900  -  total flux cleaned = -0.00177676 Jy
! Component: 950  -  total flux cleaned = -0.0016481 Jy
! Component: 1000  -  total flux cleaned = -0.00152072 Jy
! Component: 1050  -  total flux cleaned = -0.00133273 Jy
! Component: 1100  -  total flux cleaned = -0.00114683 Jy
! Component: 1150  -  total flux cleaned = -0.00111669 Jy
! Component: 1200  -  total flux cleaned = -0.000995557 Jy
! Component: 1250  -  total flux cleaned = -0.000756232 Jy
! Component: 1300  -  total flux cleaned = -0.000637596 Jy
! Component: 1350  -  total flux cleaned = -0.000520402 Jy
! Component: 1400  -  total flux cleaned = -0.000346019 Jy
! Component: 1450  -  total flux cleaned = -0.00025989 Jy
! Component: 1500  -  total flux cleaned = -0.000146639 Jy
! Component: 1550  -  total flux cleaned = -0.00020302 Jy
! Component: 1600  -  total flux cleaned = -9.11749e-05 Jy
! Component: 1650  -  total flux cleaned = -3.57368e-05 Jy
! Component: 1700  -  total flux cleaned = -6.34976e-05 Jy
! Component: 1750  -  total flux cleaned = -6.35951e-05 Jy
! Component: 1800  -  total flux cleaned = -6.35125e-05 Jy
! Component: 1850  -  total flux cleaned = 4.35449e-05 Jy
! Component: 1900  -  total flux cleaned = 4.30415e-05 Jy
! Component: 1950  -  total flux cleaned = 1.66788e-05 Jy
! Component: 2000  -  total flux cleaned = 6.91054e-05 Jy
! Component: 2050  -  total flux cleaned = 0.000120794 Jy
! Component: 2100  -  total flux cleaned = 6.95665e-05 Jy
! Component: 2150  -  total flux cleaned = 0.000120706 Jy
! Component: 2200  -  total flux cleaned = 0.000120485 Jy
! Component: 2250  -  total flux cleaned = 0.000195686 Jy
! Component: 2300  -  total flux cleaned = 0.000145679 Jy
! Component: 2350  -  total flux cleaned = 0.000145255 Jy
! Component: 2400  -  total flux cleaned = 9.60171e-05 Jy
! Component: 2450  -  total flux cleaned = 9.61052e-05 Jy
! Component: 2500  -  total flux cleaned = -4.8913e-05 Jy
! Component: 2550  -  total flux cleaned = -4.90657e-05 Jy
! Component: 2600  -  total flux cleaned = -0.000144524 Jy
! Component: 2650  -  total flux cleaned = -0.000144451 Jy
! Component: 2700  -  total flux cleaned = -0.000285842 Jy
! Component: 2750  -  total flux cleaned = -0.000332489 Jy
! Component: 2800  -  total flux cleaned = -0.000332431 Jy
! Component: 2850  -  total flux cleaned = -0.000401772 Jy
! Component: 2900  -  total flux cleaned = -0.000493499 Jy
! Component: 2950  -  total flux cleaned = -0.000470852 Jy
! Component: 3000  -  total flux cleaned = -0.000584375 Jy
! Component: 3050  -  total flux cleaned = -0.000606889 Jy
! Component: 3100  -  total flux cleaned = -0.000673821 Jy
! Component: 3150  -  total flux cleaned = -0.00067386 Jy
! Component: 3200  -  total flux cleaned = -0.000739978 Jy
! Component: 3250  -  total flux cleaned = -0.000783885 Jy
! Component: 3300  -  total flux cleaned = -0.000849287 Jy
! Component: 3350  -  total flux cleaned = -0.000914438 Jy
! Component: 3400  -  total flux cleaned = -0.000871295 Jy
! Component: 3450  -  total flux cleaned = -0.00106414 Jy
! Component: 3500  -  total flux cleaned = -0.0011068 Jy
! Component: 3550  -  total flux cleaned = -0.00121281 Jy
! Component: 3600  -  total flux cleaned = -0.00123403 Jy
! Component: 3650  -  total flux cleaned = -0.00123423 Jy
! Component: 3700  -  total flux cleaned = -0.00138005 Jy
! Component: 3750  -  total flux cleaned = -0.00148371 Jy
! Component: 3800  -  total flux cleaned = -0.00146305 Jy
! Component: 3850  -  total flux cleaned = -0.00160617 Jy
! Component: 3900  -  total flux cleaned = -0.00150436 Jy
! Component: 3950  -  total flux cleaned = -0.0015855 Jy
! Component: 4000  -  total flux cleaned = -0.00160578 Jy
! Component: 4050  -  total flux cleaned = -0.00172607 Jy
! Total flux subtracted in 4096 components = -0.001726 Jy
! Clean residual min=-0.001108 max=0.001156 Jy/beam
! Clean residual mean=0.000001 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.623659 Jy
keep
! Adding 332 model components to the UV plane model.
! The established model now contains 425 components and 0.623659 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J2358-1020_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6111 x 3.134 at -10.34 degrees (North through East)
! Clean map  min=-0.0023926  max=0.49404 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J2358-1020_X_map.fits
wmodel /scr/pima/rdv91_uvs/J2358-1020_X_map.mod
! Writing 425 model components to file: /scr/pima/rdv91_uvs/J2358-1020_X_map.mod
wobs   /scr/pima/rdv91_uvs/J2358-1020_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J2358-1020_X_uvs.fits
wwins  /scr/pima/rdv91_uvs/J2358-1020_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rdv91_uvs/J2358-1020_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.49404 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00035157 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.213487 0.213487 0.426973 0.853946 1.70789 3.41579 6.83157 13.6631 27.3263 54.6526
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.494 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1405.24 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J2358-1020_X_dfm.log closed on Fri Jun 15 11:31:00 2018