! Started logfile: /scr/pima/rdv91_uvs/J1505+0326_X_dfm.log on Fri Jun 15 11:27:42 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv91_uvs/J1505+0326_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J1505+0326_X_uva.fits
! AN table 1: 186 integrations on 55 of 55 possible baselines.
! AN table 2: 192 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.449784 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1505+0326
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 37404 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1505+0326_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1844 telescope corrections were flagged in sub-array 1.
!  A total of 692 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1844 telescope corrections were flagged in sub-array 1.
!  A total of 692 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1844 telescope corrections were flagged in sub-array 1.
!  A total of 692 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1844 telescope corrections were flagged in sub-array 1.
!  A total of 692 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.114927Jy  sigma=20.009340
! Fit after  self-cal, rms=0.552378Jy  sigma=9.877119
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6365 mas, bmaj=1.702 mas, bpa=-5.764 degrees
! Estimated noise=0.454891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.34723 Jy
! Component: 100  -  total flux cleaned = 0.424775 Jy
! Total flux subtracted in 100 components = 0.424775 Jy
! Clean residual min=-0.008372 max=0.027177 Jy/beam
! Clean residual mean=-0.000005 rms=0.001636 Jy/beam
! Combined flux in latest and established models = 0.424775 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.424775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112989Jy  sigma=1.928976
! Fit after  self-cal, rms=0.112976Jy  sigma=1.928821
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283828 Jy
! Component: 100  -  total flux cleaned = 0.0416649 Jy
! Total flux subtracted in 100 components = 0.0416649 Jy
! Clean residual min=-0.003825 max=0.007036 Jy/beam
! Clean residual mean=-0.000002 rms=0.000908 Jy/beam
! Combined flux in latest and established models = 0.46644 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.46644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104285Jy  sigma=1.752565
! Fit after  self-cal, rms=0.104259Jy  sigma=1.752123
! Inverting map 
! Added new window around map position (-0.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00745172 Jy
! Component: 100  -  total flux cleaned = 0.0114486 Jy
! Total flux subtracted in 100 components = 0.0114486 Jy
! Clean residual min=-0.003686 max=0.003599 Jy/beam
! Clean residual mean=-0.000001 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.477889 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.477889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103442Jy  sigma=1.735277
! Fit after  self-cal, rms=0.103417Jy  sigma=1.734775
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8268 mas, bmaj=2.034 mas, bpa=-3.383 degrees
! Estimated noise=0.243872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555035 Jy
! Component: 100  -  total flux cleaned = 0.00827506 Jy
! Component: 150  -  total flux cleaned = 0.0098164 Jy
! Component: 200  -  total flux cleaned = 0.0101561 Jy
! Total flux subtracted in 200 components = 0.0101561 Jy
! Clean residual min=-0.001896 max=0.002254 Jy/beam
! Clean residual mean=0.000002 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.488045 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.488045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103148Jy  sigma=1.729264
! Fit after  self-cal, rms=0.103144Jy  sigma=1.729112
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8268 x 2.034 at -3.383 degrees (North through East)
! Clean map  min=-0.0017392  max=0.45559 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        1.02     KP        1.01     
!   LA        1.03     NL        1.03     NY        0.92     OV        1.02     
!   PT        1.00     SC        1.01     WZ        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     FT        1.00*    HN        1.02     
!   KP        1.00     LA        1.00     MK        1.00     NL        1.00     
!   OV        1.00     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.97     KP        1.00     
!   LA        1.03     NL        0.99     NY        0.93     OV        1.00     
!   PT        1.03     SC        0.98     WZ        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     FT        1.00*    HN        1.00     
!   KP        1.00     LA        1.01     MK        0.99     NL        1.00     
!   OV        0.99     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.97     KP        0.99     
!   LA        1.07     NL        1.02     NY        0.96     OV        1.02     
!   PT        1.01     SC        1.01     WZ        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     FT        1.00*    HN        1.00     
!   KP        1.00     LA        1.00     MK        1.00     NL        1.00     
!   OV        0.99     PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.98     KP        1.02     
!   LA        1.01     NL        1.01     NY        0.95     OV        1.00     
!   PT        0.99     SC        1.03     WZ        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     FD        1.00     FT        1.00*    HN        1.01     
!   KP        1.00     LA        0.99     MK        1.00     NL        1.01     
!   OV        1.00     PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.103144Jy  sigma=1.729112
! Fit after  self-cal, rms=0.102629Jy  sigma=1.724284
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.042 mas, bpa=-3.011 degrees
! Estimated noise=0.244392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358268 Jy
! Component: 100  -  total flux cleaned = 0.000383082 Jy
! Component: 150  -  total flux cleaned = 0.000400449 Jy
! Component: 200  -  total flux cleaned = 0.000429847 Jy
! Total flux subtracted in 200 components = 0.000429847 Jy
! Clean residual min=-0.001758 max=0.002234 Jy/beam
! Clean residual mean=0.000001 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.488475 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.488475 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102614Jy  sigma=1.724096
! Fit after  self-cal, rms=0.102607Jy  sigma=1.724053
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102607Jy  sigma=1.724053
! Fit after  self-cal, rms=0.102544Jy  sigma=1.723156
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.041 mas, bpa=-2.998 degrees
! Estimated noise=0.24431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134713 Jy
! Component: 100  -  total flux cleaned = 0.000219973 Jy
! Component: 150  -  total flux cleaned = 0.000286739 Jy
! Component: 200  -  total flux cleaned = 0.000323348 Jy
! Total flux subtracted in 200 components = 0.000323348 Jy
! Clean residual min=-0.001734 max=0.002200 Jy/beam
! Clean residual mean=0.000000 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.488798 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.488798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102538Jy  sigma=1.723076
! Fit after  self-cal, rms=0.102537Jy  sigma=1.723054
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, -15.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000821155 Jy
! Component: 100  -  total flux cleaned = 0.000388649 Jy
! Component: 150  -  total flux cleaned = 9.72488e-05 Jy
! Component: 200  -  total flux cleaned = -1.11211e-05 Jy
! Total flux subtracted in 200 components = -1.11211e-05 Jy
! Clean residual min=-0.001718 max=0.001724 Jy/beam
! Clean residual mean=0.000000 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.488787 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.488787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102496Jy  sigma=1.722305
! Fit after  self-cal, rms=0.102494Jy  sigma=1.722258
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102494Jy  sigma=1.722258
! Fit after  self-cal, rms=0.102375Jy  sigma=1.720758
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.04 mas, bpa=-2.982 degrees
! Estimated noise=0.244239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.17063e-06 Jy
! Component: 100  -  total flux cleaned = -6.93908e-05 Jy
! Component: 150  -  total flux cleaned = -0.000135341 Jy
! Component: 200  -  total flux cleaned = -0.000156243 Jy
! Total flux subtracted in 200 components = -0.000156243 Jy
! Clean residual min=-0.001671 max=0.001652 Jy/beam
! Clean residual mean=0.000000 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.488631 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 58 components and 0.488631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102364Jy  sigma=1.720560
! Fit after  self-cal, rms=0.102364Jy  sigma=1.720554
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.74326e-05 Jy
! Component: 100  -  total flux cleaned = -7.56898e-05 Jy
! Component: 150  -  total flux cleaned = -0.000111341 Jy
! Component: 200  -  total flux cleaned = -0.000127929 Jy
! Total flux subtracted in 200 components = -0.000127929 Jy
! Clean residual min=-0.001668 max=0.001648 Jy/beam
! Clean residual mean=0.000000 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.488503 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 61 components and 0.488503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102357Jy  sigma=1.720447
! Fit after  self-cal, rms=0.102357Jy  sigma=1.720448
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102357Jy  sigma=1.720448
! Fit after  self-cal, rms=0.102329Jy  sigma=1.720433
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.154 mas, bmaj=3.252 mas, bpa=-4.218 degrees
! Estimated noise=0.314199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.72317e-05 Jy
! Component: 100  -  total flux cleaned = -4.58962e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010675 Jy
! Component: 200  -  total flux cleaned = -0.000119945 Jy
! Total flux subtracted in 200 components = -0.000119945 Jy
! Clean residual min=-0.001835 max=0.001781 Jy/beam
! Clean residual mean=0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.488383 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.488383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102326Jy  sigma=1.720415
! Fit after  self-cal, rms=0.102325Jy  sigma=1.720400
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.44464e-05 Jy
! Component: 100  -  total flux cleaned = -1.06219e-05 Jy
! Component: 150  -  total flux cleaned = -5.2569e-05 Jy
! Component: 200  -  total flux cleaned = -8.01985e-05 Jy
! Total flux subtracted in 200 components = -8.01985e-05 Jy
! Clean residual min=-0.001830 max=0.001772 Jy/beam
! Clean residual mean=0.000001 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.488303 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 0.488303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102325Jy  sigma=1.720428
! Fit after  self-cal, rms=0.102326Jy  sigma=1.720421
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.04 mas, bpa=-2.976 degrees
! Estimated noise=0.244212 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8348 x 2.04 at -2.976 degrees (North through East)
! Clean map  min=-0.0014553  max=0.45446 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6458 mas, bmaj=1.705 mas, bpa=-5.136 degrees
! Estimated noise=0.461018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.348171 Jy
! Component: 100  -  total flux cleaned = 0.425977 Jy
! Component: 150  -  total flux cleaned = 0.454409 Jy
! Component: 200  -  total flux cleaned = 0.467936 Jy
! Total flux subtracted in 200 components = 0.467936 Jy
! Clean residual min=-0.003975 max=0.006320 Jy/beam
! Clean residual mean=-0.000003 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.467936 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.467936 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.04 mas, bpa=-2.976 degrees
! Estimated noise=0.244212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010118 Jy
! Component: 100  -  total flux cleaned = 0.0149162 Jy
! Component: 150  -  total flux cleaned = 0.0174166 Jy
! Component: 200  -  total flux cleaned = 0.0184796 Jy
! Total flux subtracted in 200 components = 0.0184796 Jy
! Clean residual min=-0.001822 max=0.001951 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.486415 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 31 components and 0.486415 Jy
! Inverting map 
! Added new window around map position (-1.4, 0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103016 Jy
! Component: 100  -  total flux cleaned = 0.00113852 Jy
! Component: 150  -  total flux cleaned = 0.00126843 Jy
! Component: 200  -  total flux cleaned = 0.00137867 Jy
! Total flux subtracted in 200 components = 0.00137867 Jy
! Clean residual min=-0.001646 max=0.001650 Jy/beam
! Clean residual mean=0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.487794 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.487794 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.154 mas, bmaj=3.252 mas, bpa=-4.218 degrees
! Estimated noise=0.314199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000770336 Jy
! Component: 100  -  total flux cleaned = 0.000966396 Jy
! Component: 150  -  total flux cleaned = 0.00107515 Jy
! Component: 200  -  total flux cleaned = 0.00107493 Jy
! Total flux subtracted in 200 components = 0.00107493 Jy
! Clean residual min=-0.001741 max=0.001737 Jy/beam
! Clean residual mean=0.000001 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.488869 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.51579e-07 Jy
! Component: 100  -  total flux cleaned = -5.60395e-07 Jy
! Component: 150  -  total flux cleaned = -6.1934e-07 Jy
! Component: 200  -  total flux cleaned = -9.03622e-07 Jy
! Total flux subtracted in 200 components = -9.03622e-07 Jy
! Clean residual min=-0.001727 max=0.001726 Jy/beam
! Clean residual mean=0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.488868 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 79 components and 0.488868 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8348 mas, bmaj=2.04 mas, bpa=-2.976 degrees
! Estimated noise=0.244212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.54436e-05 Jy
! Component: 100  -  total flux cleaned = -0.000156488 Jy
! Component: 150  -  total flux cleaned = -0.000259902 Jy
! Component: 200  -  total flux cleaned = -0.000279655 Jy
! Total flux subtracted in 200 components = -0.000279655 Jy
! Clean residual min=-0.001628 max=0.001616 Jy/beam
! Clean residual mean=0.000001 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.488588 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 90 components and 0.488588 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102321Jy  sigma=1.720236
! Fit after  self-cal, rms=0.102316Jy  sigma=1.720188
wmodel J1505+0326_X_map.mod
! Writing 90 model components to file: J1505+0326_X_map.mod
wobs   J1505+0326_X_uvs.fits
! Writing UV FITS file: J1505+0326_X_uvs.fits
wwins  J1505+0326_X_map.win
! wwins: Wrote 4 windows to J1505+0326_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115245 Jy
! Component: 100  -  total flux cleaned = -0.00022376 Jy
! Component: 150  -  total flux cleaned = -0.00038041 Jy
! Component: 200  -  total flux cleaned = -0.000556876 Jy
! Component: 250  -  total flux cleaned = -0.000606539 Jy
! Component: 300  -  total flux cleaned = -0.000606731 Jy
! Component: 350  -  total flux cleaned = -0.000630529 Jy
! Component: 400  -  total flux cleaned = -0.000654108 Jy
! Component: 450  -  total flux cleaned = -0.000676963 Jy
! Component: 500  -  total flux cleaned = -0.000631747 Jy
! Component: 550  -  total flux cleaned = -0.000654348 Jy
! Component: 600  -  total flux cleaned = -0.000609859 Jy
! Component: 650  -  total flux cleaned = -0.00056652 Jy
! Component: 700  -  total flux cleaned = -0.000588129 Jy
! Component: 750  -  total flux cleaned = -0.00060952 Jy
! Component: 800  -  total flux cleaned = -0.000546109 Jy
! Component: 850  -  total flux cleaned = -0.000546198 Jy
! Component: 900  -  total flux cleaned = -0.000525643 Jy
! Component: 950  -  total flux cleaned = -0.000566782 Jy
! Component: 1000  -  total flux cleaned = -0.000587157 Jy
! Component: 1050  -  total flux cleaned = -0.000647461 Jy
! Component: 1100  -  total flux cleaned = -0.00066731 Jy
! Component: 1150  -  total flux cleaned = -0.000667108 Jy
! Component: 1200  -  total flux cleaned = -0.000667162 Jy
! Component: 1250  -  total flux cleaned = -0.000667195 Jy
! Component: 1300  -  total flux cleaned = -0.000667337 Jy
! Component: 1350  -  total flux cleaned = -0.000686428 Jy
! Component: 1400  -  total flux cleaned = -0.000743444 Jy
! Component: 1450  -  total flux cleaned = -0.000687238 Jy
! Component: 1500  -  total flux cleaned = -0.000762132 Jy
! Component: 1550  -  total flux cleaned = -0.00079941 Jy
! Component: 1600  -  total flux cleaned = -0.000799335 Jy
! Component: 1650  -  total flux cleaned = -0.000817589 Jy
! Component: 1700  -  total flux cleaned = -0.000799368 Jy
! Component: 1750  -  total flux cleaned = -0.000853382 Jy
! Component: 1800  -  total flux cleaned = -0.000889038 Jy
! Component: 1850  -  total flux cleaned = -0.000817827 Jy
! Component: 1900  -  total flux cleaned = -0.000888526 Jy
! Component: 1950  -  total flux cleaned = -0.000940995 Jy
! Component: 2000  -  total flux cleaned = -0.000871217 Jy
! Component: 2050  -  total flux cleaned = -0.000905867 Jy
! Component: 2100  -  total flux cleaned = -0.000784935 Jy
! Component: 2150  -  total flux cleaned = -0.000802088 Jy
! Component: 2200  -  total flux cleaned = -0.000785101 Jy
! Component: 2250  -  total flux cleaned = -0.000886822 Jy
! Component: 2300  -  total flux cleaned = -0.00090348 Jy
! Component: 2350  -  total flux cleaned = -0.000920168 Jy
! Component: 2400  -  total flux cleaned = -0.00080377 Jy
! Component: 2450  -  total flux cleaned = -0.000919753 Jy
! Component: 2500  -  total flux cleaned = -0.000936117 Jy
! Component: 2550  -  total flux cleaned = -0.000919663 Jy
! Component: 2600  -  total flux cleaned = -0.000870862 Jy
! Component: 2650  -  total flux cleaned = -0.000870805 Jy
! Component: 2700  -  total flux cleaned = -0.000806447 Jy
! Component: 2750  -  total flux cleaned = -0.000886705 Jy
! Component: 2800  -  total flux cleaned = -0.0008548 Jy
! Component: 2850  -  total flux cleaned = -0.000839016 Jy
! Component: 2900  -  total flux cleaned = -0.000823224 Jy
! Component: 2950  -  total flux cleaned = -0.000854532 Jy
! Component: 3000  -  total flux cleaned = -0.000838962 Jy
! Component: 3050  -  total flux cleaned = -0.000823249 Jy
! Component: 3100  -  total flux cleaned = -0.000761397 Jy
! Component: 3150  -  total flux cleaned = -0.000807536 Jy
! Component: 3200  -  total flux cleaned = -0.000761617 Jy
! Component: 3250  -  total flux cleaned = -0.000792105 Jy
! Component: 3300  -  total flux cleaned = -0.000776995 Jy
! Component: 3350  -  total flux cleaned = -0.00074675 Jy
! Component: 3400  -  total flux cleaned = -0.000776742 Jy
! Component: 3450  -  total flux cleaned = -0.000731755 Jy
! Component: 3500  -  total flux cleaned = -0.000746684 Jy
! Component: 3550  -  total flux cleaned = -0.000746752 Jy
! Component: 3600  -  total flux cleaned = -0.000790907 Jy
! Component: 3650  -  total flux cleaned = -0.000790957 Jy
! Component: 3700  -  total flux cleaned = -0.000746936 Jy
! Component: 3750  -  total flux cleaned = -0.000761605 Jy
! Component: 3800  -  total flux cleaned = -0.000776122 Jy
! Component: 3850  -  total flux cleaned = -0.000833926 Jy
! Component: 3900  -  total flux cleaned = -0.000819575 Jy
! Component: 3950  -  total flux cleaned = -0.00083387 Jy
! Component: 4000  -  total flux cleaned = -0.000862516 Jy
! Component: 4050  -  total flux cleaned = -0.000848402 Jy
! Total flux subtracted in 4096 components = -0.000805851 Jy
! Clean residual min=-0.000911 max=0.000897 Jy/beam
! Clean residual mean=0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.487783 Jy
keep
! Adding 330 model components to the UV plane model.
! The established model now contains 420 components and 0.487783 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J1505+0326_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8348 x 2.04 at -2.976 degrees (North through East)
! Clean map  min=-0.0014283  max=0.45459 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J1505+0326_X_map.fits
wmodel /scr/pima/rdv91_uvs/J1505+0326_X_map.mod
! Writing 420 model components to file: /scr/pima/rdv91_uvs/J1505+0326_X_map.mod
wobs   /scr/pima/rdv91_uvs/J1505+0326_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J1505+0326_X_uvs.fits
wwins  /scr/pima/rdv91_uvs/J1505+0326_X_map.win
! wwins: Wrote 5 windows to /scr/pima/rdv91_uvs/J1505+0326_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.454594 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245975 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.162326 0.162326 0.324653 0.649306 1.29861 2.59722 5.19445 10.3889 20.7778 41.5556 83.1112
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.454 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1848.13 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J1505+0326_X_dfm.log closed on Fri Jun 15 11:27:48 2018