! Started logfile: /scr/pima/rdv91_uvs/J1427-4206_X_dfm.log on Fri Jun 15 11:27:31 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv91_uvs/J1427-4206_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J1427-4206_X_uva.fits
! AN table 1: 139 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.201439 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1427-4206
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 4032 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1427-4206_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1108 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1108 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1108 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1108 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.573955Jy  sigma=24.168884
! Fit after  self-cal, rms=1.452553Jy  sigma=13.527091
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7459 mas, bmaj=5.22 mas, bpa=16.3 degrees
! Estimated noise=2.56987 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.77815 Jy
! Component: 100  -  total flux cleaned = 2.17439 Jy
! Total flux subtracted in 100 components = 2.17439 Jy
! Clean residual min=-0.081634 max=0.142833 Jy/beam
! Clean residual mean=0.001011 rms=0.024259 Jy/beam
! Combined flux in latest and established models = 2.17439 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 2.17439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.436002Jy  sigma=3.953522
! Fit after  self-cal, rms=0.435680Jy  sigma=3.951088
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.175991 Jy
! Component: 100  -  total flux cleaned = 0.294353 Jy
! Total flux subtracted in 100 components = 0.294353 Jy
! Clean residual min=-0.054319 max=0.065777 Jy/beam
! Clean residual mean=0.000425 rms=0.015418 Jy/beam
! Combined flux in latest and established models = 2.46874 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 39 components and 2.46874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.289131Jy  sigma=2.577658
! Fit after  self-cal, rms=0.288397Jy  sigma=2.573020
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.961 mas, bmaj=5.87 mas, bpa=15.47 degrees
! Estimated noise=2.0199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132334 Jy
! Component: 100  -  total flux cleaned = 0.20906 Jy
! Component: 150  -  total flux cleaned = 0.256185 Jy
! Component: 200  -  total flux cleaned = 0.285489 Jy
! Total flux subtracted in 200 components = 0.285489 Jy
! Clean residual min=-0.044537 max=0.047588 Jy/beam
! Clean residual mean=-0.000271 rms=0.012517 Jy/beam
! Combined flux in latest and established models = 2.75423 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 78 components and 2.75423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212217Jy  sigma=1.873546
! Fit after  self-cal, rms=0.211858Jy  sigma=1.870671
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.961 x 5.87 at 15.47 degrees (North through East)
! Clean map  min=-0.043346  max=2.2758 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     FT        1.00*    KP        0.99     LA        0.99     
!   MK        1.00*    NL        1.10     OV        0.98     PT        1.04     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     FT        1.00*    KP        0.98     LA        0.99     
!   MK        1.00*    NL        1.09     OV        0.98     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     FT        1.00*    KP        0.98     LA        0.99     
!   MK        1.00*    NL        1.10     OV        0.95     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     FT        1.00*    KP        0.96     LA        0.97     
!   MK        1.00*    NL        1.09     OV        0.94     PT        1.02     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.211858Jy  sigma=1.870671
! Fit after  self-cal, rms=0.184574Jy  sigma=1.579584
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9659 mas, bmaj=5.946 mas, bpa=15.46 degrees
! Estimated noise=2.02877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0215841 Jy
! Component: 100  -  total flux cleaned = -0.0241195 Jy
! Component: 150  -  total flux cleaned = -0.0262663 Jy
! Component: 200  -  total flux cleaned = -0.0281117 Jy
! Total flux subtracted in 200 components = -0.0281117 Jy
! Clean residual min=-0.034425 max=0.031609 Jy/beam
! Clean residual mean=-0.000077 rms=0.008380 Jy/beam
! Combined flux in latest and established models = 2.72612 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 2.72612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176971Jy  sigma=1.516691
! Fit after  self-cal, rms=0.176776Jy  sigma=1.515050
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176776Jy  sigma=1.515050
! Fit after  self-cal, rms=0.168892Jy  sigma=1.434708
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9667 mas, bmaj=5.967 mas, bpa=15.47 degrees
! Estimated noise=2.02796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0196083 Jy
! Component: 100  -  total flux cleaned = -0.0221053 Jy
! Component: 150  -  total flux cleaned = -0.0236785 Jy
! Component: 200  -  total flux cleaned = -0.0246251 Jy
! Total flux subtracted in 200 components = -0.0246251 Jy
! Clean residual min=-0.028129 max=0.025100 Jy/beam
! Clean residual mean=-0.000095 rms=0.006905 Jy/beam
! Combined flux in latest and established models = 2.70149 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 100 components and 2.70149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164230Jy  sigma=1.397512
! Fit after  self-cal, rms=0.164178Jy  sigma=1.397126
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0013396 Jy
! Component: 100  -  total flux cleaned = -0.00173358 Jy
! Component: 150  -  total flux cleaned = -0.00207447 Jy
! Component: 200  -  total flux cleaned = -0.00237163 Jy
! Total flux subtracted in 200 components = -0.00237163 Jy
! Clean residual min=-0.026847 max=0.024808 Jy/beam
! Clean residual mean=-0.000087 rms=0.006794 Jy/beam
! Combined flux in latest and established models = 2.69912 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 2.69912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162665Jy  sigma=1.385585
! Fit after  self-cal, rms=0.162623Jy  sigma=1.385287
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162623Jy  sigma=1.385287
! Fit after  self-cal, rms=0.151671Jy  sigma=1.257237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9672 mas, bmaj=5.968 mas, bpa=15.46 degrees
! Estimated noise=2.02685 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0128742 Jy
! Component: 100  -  total flux cleaned = -0.0155621 Jy
! Component: 150  -  total flux cleaned = -0.0166527 Jy
! Component: 200  -  total flux cleaned = -0.0175709 Jy
! Total flux subtracted in 200 components = -0.0175709 Jy
! Clean residual min=-0.016408 max=0.017279 Jy/beam
! Clean residual mean=-0.000024 rms=0.004596 Jy/beam
! Combined flux in latest and established models = 2.68155 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 118 components and 2.68155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149952Jy  sigma=1.246675
! Fit after  self-cal, rms=0.149954Jy  sigma=1.246542
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103887 Jy
! Component: 100  -  total flux cleaned = -0.00137791 Jy
! Component: 150  -  total flux cleaned = -0.00153659 Jy
! Component: 200  -  total flux cleaned = -0.00168993 Jy
! Total flux subtracted in 200 components = -0.00168993 Jy
! Clean residual min=-0.015921 max=0.017129 Jy/beam
! Clean residual mean=-0.000020 rms=0.004567 Jy/beam
! Combined flux in latest and established models = 2.67986 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 2.67986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149534Jy  sigma=1.244201
! Fit after  self-cal, rms=0.149529Jy  sigma=1.244160
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149529Jy  sigma=1.244160
! Fit after  self-cal, rms=0.149411Jy  sigma=1.238460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.628 mas, bmaj=11.24 mas, bpa=-0.5959 degrees
! Estimated noise=2.46025 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00755707 Jy
! Component: 100  -  total flux cleaned = -0.00888876 Jy
! Component: 150  -  total flux cleaned = -0.00943336 Jy
! Component: 200  -  total flux cleaned = -0.00979507 Jy
! Total flux subtracted in 200 components = -0.00979507 Jy
! Clean residual min=-0.019357 max=0.018936 Jy/beam
! Clean residual mean=-0.000059 rms=0.006145 Jy/beam
! Combined flux in latest and established models = 2.67006 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 132 components and 2.67006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148679Jy  sigma=1.234768
! Fit after  self-cal, rms=0.148648Jy  sigma=1.234219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000972477 Jy
! Component: 100  -  total flux cleaned = -0.00107768 Jy
! Component: 150  -  total flux cleaned = -0.00147947 Jy
! Component: 200  -  total flux cleaned = -0.0018474 Jy
! Total flux subtracted in 200 components = -0.0018474 Jy
! Clean residual min=-0.019465 max=0.018822 Jy/beam
! Clean residual mean=-0.000051 rms=0.006135 Jy/beam
! Combined flux in latest and established models = 2.66822 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 135 components and 2.66822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148454Jy  sigma=1.233505
! Fit after  self-cal, rms=0.148417Jy  sigma=1.233253
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9674 mas, bmaj=5.986 mas, bpa=15.47 degrees
! Estimated noise=2.0269 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9674 x 5.986 at 15.47 degrees (North through East)
! Clean map  min=-0.01417  max=2.2641 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148417Jy  sigma=1.233253
! Fit after  self-cal, rms=0.140426Jy  sigma=1.077351
! Inverting map and beam 
! Estimated beam: bmin=0.9685 mas, bmaj=5.997 mas, bpa=15.47 degrees
! Estimated noise=2.02858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00805455 Jy
! Component: 100  -  total flux cleaned = -0.00938773 Jy
! Component: 150  -  total flux cleaned = -0.0105055 Jy
! Component: 200  -  total flux cleaned = -0.0112894 Jy
! Total flux subtracted in 200 components = -0.0112894 Jy
! Clean residual min=-0.014491 max=0.016261 Jy/beam
! Clean residual mean=-0.000021 rms=0.004141 Jy/beam
! Combined flux in latest and established models = 2.65693 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 138 components and 2.65693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139564Jy  sigma=1.072312
! Fit after  self-cal, rms=0.139575Jy  sigma=1.072266
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000403809 Jy
! Component: 100  -  total flux cleaned = -0.00100894 Jy
! Component: 150  -  total flux cleaned = -0.00133185 Jy
! Component: 200  -  total flux cleaned = -0.00152723 Jy
! Total flux subtracted in 200 components = -0.00152723 Jy
! Clean residual min=-0.014450 max=0.016139 Jy/beam
! Clean residual mean=-0.000017 rms=0.004132 Jy/beam
! Combined flux in latest and established models = 2.6554 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 144 components and 2.6554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139315Jy  sigma=1.071268
! Fit after  self-cal, rms=0.139319Jy  sigma=1.071234
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139319Jy  sigma=1.071234
! Fit after  self-cal, rms=0.139321Jy  sigma=1.067668
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7431 mas, bmaj=5.335 mas, bpa=16.3 degrees
! Estimated noise=2.61861 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.79485 Jy
! Component: 100  -  total flux cleaned = 2.19265 Jy
! Component: 150  -  total flux cleaned = 2.34438 Jy
! Component: 200  -  total flux cleaned = 2.43662 Jy
! Total flux subtracted in 200 components = 2.43662 Jy
! Clean residual min=-0.026791 max=0.049795 Jy/beam
! Clean residual mean=0.000413 rms=0.008584 Jy/beam
! Combined flux in latest and established models = 2.43662 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 2.43662 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9684 mas, bmaj=6.01 mas, bpa=15.48 degrees
! Estimated noise=2.02876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0919144 Jy
! Component: 100  -  total flux cleaned = 0.140006 Jy
! Component: 150  -  total flux cleaned = 0.167196 Jy
! Component: 200  -  total flux cleaned = 0.183089 Jy
! Total flux subtracted in 200 components = 0.183089 Jy
! Clean residual min=-0.015088 max=0.017822 Jy/beam
! Clean residual mean=0.000058 rms=0.004365 Jy/beam
! Combined flux in latest and established models = 2.61971 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 68 components and 2.61971 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.638 mas, bmaj=11.3 mas, bpa=-0.5765 degrees
! Estimated noise=2.45674 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135014 Jy
! Component: 100  -  total flux cleaned = 0.0194877 Jy
! Component: 150  -  total flux cleaned = 0.0220653 Jy
! Component: 200  -  total flux cleaned = 0.0224094 Jy
! Total flux subtracted in 200 components = 0.0224094 Jy
! Clean residual min=-0.018194 max=0.017421 Jy/beam
! Clean residual mean=-0.000029 rms=0.005652 Jy/beam
! Combined flux in latest and established models = 2.64212 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000242504 Jy
! Component: 100  -  total flux cleaned = 0.000471934 Jy
! Component: 150  -  total flux cleaned = 0.000753753 Jy
! Component: 200  -  total flux cleaned = 0.000955449 Jy
! Total flux subtracted in 200 components = 0.000955449 Jy
! Clean residual min=-0.018235 max=0.017443 Jy/beam
! Clean residual mean=-0.000033 rms=0.005642 Jy/beam
! Combined flux in latest and established models = 2.64307 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 76 components and 2.64307 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9684 mas, bmaj=6.01 mas, bpa=15.48 degrees
! Estimated noise=2.02876 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00269911 Jy
! Component: 100  -  total flux cleaned = -0.00290578 Jy
! Component: 150  -  total flux cleaned = -0.00256179 Jy
! Component: 200  -  total flux cleaned = -0.00226345 Jy
! Total flux subtracted in 200 components = -0.00226345 Jy
! Clean residual min=-0.014490 max=0.015242 Jy/beam
! Clean residual mean=-0.000009 rms=0.004006 Jy/beam
! Combined flux in latest and established models = 2.64081 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 82 components and 2.64081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138906Jy  sigma=1.068284
! Fit after  self-cal, rms=0.138825Jy  sigma=1.067415
wmodel J1427-4206_X_map.mod
! Writing 82 model components to file: J1427-4206_X_map.mod
wobs   J1427-4206_X_uvs.fits
! Writing UV FITS file: J1427-4206_X_uvs.fits
wwins  J1427-4206_X_map.win
! wwins: Wrote 1 windows to J1427-4206_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00423474 Jy
! Component: 100  -  total flux cleaned = 0.00498098 Jy
! Component: 150  -  total flux cleaned = 0.00613048 Jy
! Component: 200  -  total flux cleaned = 0.00676965 Jy
! Component: 250  -  total flux cleaned = 0.00717902 Jy
! Component: 300  -  total flux cleaned = 0.00756503 Jy
! Component: 350  -  total flux cleaned = 0.00756541 Jy
! Component: 400  -  total flux cleaned = 0.0080946 Jy
! Component: 450  -  total flux cleaned = 0.00893878 Jy
! Component: 500  -  total flux cleaned = 0.0100708 Jy
! Component: 550  -  total flux cleaned = 0.0102272 Jy
! Component: 600  -  total flux cleaned = 0.0100761 Jy
! Component: 650  -  total flux cleaned = 0.00992831 Jy
! Component: 700  -  total flux cleaned = 0.00964744 Jy
! Component: 750  -  total flux cleaned = 0.00951104 Jy
! Component: 800  -  total flux cleaned = 0.00964553 Jy
! Component: 850  -  total flux cleaned = 0.00925508 Jy
! Component: 900  -  total flux cleaned = 0.0088748 Jy
! Component: 950  -  total flux cleaned = 0.00862797 Jy
! Component: 1000  -  total flux cleaned = 0.00802173 Jy
! Component: 1050  -  total flux cleaned = 0.00766981 Jy
! Component: 1100  -  total flux cleaned = 0.0073251 Jy
! Component: 1150  -  total flux cleaned = 0.00709937 Jy
! Component: 1200  -  total flux cleaned = 0.00676917 Jy
! Component: 1250  -  total flux cleaned = 0.00666171 Jy
! Component: 1300  -  total flux cleaned = 0.00612884 Jy
! Component: 1350  -  total flux cleaned = 0.00571441 Jy
! Component: 1400  -  total flux cleaned = 0.00551168 Jy
! Component: 1450  -  total flux cleaned = 0.00511112 Jy
! Component: 1500  -  total flux cleaned = 0.00491362 Jy
! Component: 1550  -  total flux cleaned = 0.00461995 Jy
! Component: 1600  -  total flux cleaned = 0.00385656 Jy
! Component: 1650  -  total flux cleaned = 0.00348238 Jy
! Component: 1700  -  total flux cleaned = 0.00284046 Jy
! Component: 1750  -  total flux cleaned = 0.00211705 Jy
! Component: 1800  -  total flux cleaned = 0.00185069 Jy
! Component: 1850  -  total flux cleaned = 0.00114924 Jy
! Component: 1900  -  total flux cleaned = 0.000374541 Jy
! Component: 1950  -  total flux cleaned = -0.000303395 Jy
! Component: 2000  -  total flux cleaned = -0.000884397 Jy
! Component: 2050  -  total flux cleaned = -0.00129559 Jy
! Component: 2100  -  total flux cleaned = -0.00202258 Jy
! Component: 2150  -  total flux cleaned = -0.00265967 Jy
! Component: 2200  -  total flux cleaned = -0.00289525 Jy
! Component: 2250  -  total flux cleaned = -0.00366902 Jy
! Component: 2300  -  total flux cleaned = -0.00412759 Jy
! Component: 2350  -  total flux cleaned = -0.00503055 Jy
! Component: 2400  -  total flux cleaned = -0.00532666 Jy
! Component: 2450  -  total flux cleaned = -0.00561899 Jy
! Component: 2500  -  total flux cleaned = -0.00626756 Jy
! Component: 2550  -  total flux cleaned = -0.0065533 Jy
! Component: 2600  -  total flux cleaned = -0.00690493 Jy
! Component: 2650  -  total flux cleaned = -0.00766663 Jy
! Component: 2700  -  total flux cleaned = -0.00807533 Jy
! Component: 2750  -  total flux cleaned = -0.00834525 Jy
! Component: 2800  -  total flux cleaned = -0.00881051 Jy
! Component: 2850  -  total flux cleaned = -0.00933383 Jy
! Component: 2900  -  total flux cleaned = -0.00952837 Jy
! Component: 2950  -  total flux cleaned = -0.0099756 Jy
! Component: 3000  -  total flux cleaned = -0.0103545 Jy
! Component: 3050  -  total flux cleaned = -0.0109156 Jy
! Component: 3100  -  total flux cleaned = -0.0114091 Jy
! Component: 3150  -  total flux cleaned = -0.0117755 Jy
! Component: 3200  -  total flux cleaned = -0.0123788 Jy
! Component: 3250  -  total flux cleaned = -0.012737 Jy
! Component: 3300  -  total flux cleaned = -0.0132684 Jy
! Component: 3350  -  total flux cleaned = -0.0138521 Jy
! Component: 3400  -  total flux cleaned = -0.0144863 Jy
! Component: 3450  -  total flux cleaned = -0.0148285 Jy
! Component: 3500  -  total flux cleaned = -0.0153387 Jy
! Component: 3550  -  total flux cleaned = -0.0158982 Jy
! Component: 3600  -  total flux cleaned = -0.016285 Jy
! Component: 3650  -  total flux cleaned = -0.016669 Jy
! Component: 3700  -  total flux cleaned = -0.0172111 Jy
! Component: 3750  -  total flux cleaned = -0.0174262 Jy
! Component: 3800  -  total flux cleaned = -0.0178521 Jy
! Component: 3850  -  total flux cleaned = -0.018274 Jy
! Component: 3900  -  total flux cleaned = -0.0186915 Jy
! Component: 3950  -  total flux cleaned = -0.0190542 Jy
! Component: 4000  -  total flux cleaned = -0.019516 Jy
! Component: 4050  -  total flux cleaned = -0.0198212 Jy
! Total flux subtracted in 4096 components = -0.0203252 Jy
! Clean residual min=-0.002959 max=0.002501 Jy/beam
! Clean residual mean=0.000008 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 2.62048 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 374 components and 2.62048 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J1427-4206_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9684 x 6.01 at 15.48 degrees (North through East)
! Clean map  min=-0.0089878  max=2.327 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J1427-4206_X_map.fits
wmodel /scr/pima/rdv91_uvs/J1427-4206_X_map.mod
! Writing 374 model components to file: /scr/pima/rdv91_uvs/J1427-4206_X_map.mod
wobs   /scr/pima/rdv91_uvs/J1427-4206_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J1427-4206_X_uvs.fits
wwins  /scr/pima/rdv91_uvs/J1427-4206_X_map.win
! wwins: Wrote 2 windows to /scr/pima/rdv91_uvs/J1427-4206_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.32704 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000980577 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.126415 0.126415 0.25283 0.505661 1.01132 2.02264 4.04529 8.09057 16.1811 32.3623 64.7246
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0029 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.327 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2373.13 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J1427-4206_X_dfm.log closed on Fri Jun 15 11:27:36 2018