! Started logfile: /scr/pima/rdv91_uvs/J1350+3034_X_dfm.log on Fri Jun 15 11:27:18 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv91_uvs/J1350+3034_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J1350+3034_X_uva.fits
! AN table 1: 288 integrations on 55 of 55 possible baselines.
! AN table 2: 13 integrations on 3 of 3 possible baselines.
! AN table 3: 12 integrations on 21 of 21 possible baselines.
! AN table 4: 96 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.275116 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1350+3034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 18808 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1350+3034_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2272 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
!  A total of 38 telescope corrections were flagged in sub-array 3.
!  A total of 158 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 2272 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
!  A total of 38 telescope corrections were flagged in sub-array 3.
!  A total of 158 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 2272 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
!  A total of 38 telescope corrections were flagged in sub-array 3.
!  A total of 158 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 2272 telescope corrections were flagged in sub-array 1.
!  A total of 39 telescope corrections were flagged in sub-array 2.
!  A total of 38 telescope corrections were flagged in sub-array 3.
!  A total of 158 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.032750Jy  sigma=16.934669
! Fit after  self-cal, rms=0.793301Jy  sigma=13.029553
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6139 mas, bmaj=1.023 mas, bpa=-3.374 degrees
! Estimated noise=0.589268 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.16261 Jy
! Component: 100  -  total flux cleaned = 0.204093 Jy
! Total flux subtracted in 100 components = 0.204093 Jy
! Clean residual min=-0.006539 max=0.017287 Jy/beam
! Clean residual mean=0.000017 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 0.204093 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.204093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136211Jy  sigma=1.961350
! Fit after  self-cal, rms=0.136082Jy  sigma=1.958983
! Inverting map 
! Added new window around map position (-0.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0188493 Jy
! Component: 100  -  total flux cleaned = 0.0282987 Jy
! Total flux subtracted in 100 components = 0.0282987 Jy
! Clean residual min=-0.005436 max=0.007750 Jy/beam
! Clean residual mean=0.000007 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.232392 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 12 components and 0.232392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133087Jy  sigma=1.896686
! Fit after  self-cal, rms=0.132975Jy  sigma=1.894563
! Inverting map 
! Added new window around map position (-1.6, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00785699 Jy
! Component: 100  -  total flux cleaned = 0.0119576 Jy
! Total flux subtracted in 100 components = 0.0119576 Jy
! Clean residual min=-0.005085 max=0.005293 Jy/beam
! Clean residual mean=0.000003 rms=0.001202 Jy/beam
! Combined flux in latest and established models = 0.24435 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.24435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132501Jy  sigma=1.883848
! Fit after  self-cal, rms=0.132443Jy  sigma=1.882899
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7203 mas, bmaj=1.229 mas, bpa=-5.776 degrees
! Estimated noise=0.3501 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00448902 Jy
! Component: 100  -  total flux cleaned = 0.00528815 Jy
! Component: 150  -  total flux cleaned = 0.00567054 Jy
! Component: 200  -  total flux cleaned = 0.00589253 Jy
! Total flux subtracted in 200 components = 0.00589253 Jy
! Clean residual min=-0.003399 max=0.003252 Jy/beam
! Clean residual mean=-0.000003 rms=0.000721 Jy/beam
! Combined flux in latest and established models = 0.250242 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.250242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132296Jy  sigma=1.879943
! Fit after  self-cal, rms=0.132263Jy  sigma=1.879498
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7203 x 1.229 at -5.776 degrees (North through East)
! Clean map  min=-0.0031042  max=0.20983 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.98     
!   LA        1.00     NL        1.01     NY        0.96     OV        1.01     
!   PT        0.99     SC        1.01     WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    MK        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.08     FD        1.02     KP        0.99     LA        0.98     
!   MK        1.00*    OV        0.98     PT        0.98     
! 
!  A total of 27 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     KP        0.99     MK        0.95     NY        0.94     
!   OV        1.00     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        0.97     
!   LA        1.00     NL        0.99     NY        0.94     OV        0.97     
!   PT        1.01     SC        0.99     WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    MK        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     FD        0.94     KP        0.99     LA        0.96     
!   MK        1.00*    OV        1.11     PT        0.94     
! 
!  A total of 27 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.01     KP        0.99     MK        0.99     NY        0.91     
!   OV        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.98     KP        1.00     
!   LA        1.01     NL        1.01     NY        0.96     OV        1.03     
!   PT        1.02     SC        1.01     WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    MK        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        1.02     KP        0.95     LA        0.99     
!   MK        1.00*    OV        1.00     PT        1.03     
! 
!  A total of 27 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.96     KP        1.02     MK        0.99     NY        0.96     
!   OV        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.99     NL        1.00     NY        0.95     OV        0.99     
!   PT        1.01     SC        1.04     WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    MK        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     FD        1.00     KP        1.05     LA        0.90     
!   MK        1.00*    OV        0.95     PT        1.01     
! 
!  A total of 27 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.05     KP        1.01     MK        0.96     NY        0.94     
!   OV        1.00     
! 
! 
! Fit before self-cal, rms=0.132263Jy  sigma=1.879498
! Fit after  self-cal, rms=0.129427Jy  sigma=1.878547
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7192 mas, bmaj=1.221 mas, bpa=-5.981 degrees
! Estimated noise=0.348646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159065 Jy
! Component: 100  -  total flux cleaned = 0.00171114 Jy
! Component: 150  -  total flux cleaned = 0.00171101 Jy
! Component: 200  -  total flux cleaned = 0.00170995 Jy
! Total flux subtracted in 200 components = 0.00170995 Jy
! Clean residual min=-0.003196 max=0.002849 Jy/beam
! Clean residual mean=-0.000002 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.251952 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 31 components and 0.251952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129371Jy  sigma=1.877562
! Fit after  self-cal, rms=0.129336Jy  sigma=1.877332
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129336Jy  sigma=1.877332
! Fit after  self-cal, rms=0.128966Jy  sigma=1.875288
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7176 mas, bmaj=1.22 mas, bpa=-6.044 degrees
! Estimated noise=0.348515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117736 Jy
! Component: 100  -  total flux cleaned = 0.00130065 Jy
! Component: 150  -  total flux cleaned = 0.00133502 Jy
! Component: 200  -  total flux cleaned = 0.00133404 Jy
! Total flux subtracted in 200 components = 0.00133404 Jy
! Clean residual min=-0.002696 max=0.002664 Jy/beam
! Clean residual mean=0.000005 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.253286 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.253286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128938Jy  sigma=1.874799
! Fit after  self-cal, rms=0.128944Jy  sigma=1.874687
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251065 Jy
! Component: 100  -  total flux cleaned = 0.00039676 Jy
! Component: 150  -  total flux cleaned = 0.000396376 Jy
! Component: 200  -  total flux cleaned = 0.000396308 Jy
! Total flux subtracted in 200 components = 0.000396308 Jy
! Clean residual min=-0.002683 max=0.002665 Jy/beam
! Clean residual mean=0.000004 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.253682 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 41 components and 0.253682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128932Jy  sigma=1.874486
! Fit after  self-cal, rms=0.128933Jy  sigma=1.874452
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128933Jy  sigma=1.874452
! Fit after  self-cal, rms=0.128870Jy  sigma=1.873105
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7156 mas, bmaj=1.219 mas, bpa=-6.076 degrees
! Estimated noise=0.348418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116241 Jy
! Component: 100  -  total flux cleaned = 0.00128397 Jy
! Component: 150  -  total flux cleaned = 0.00138407 Jy
! Component: 200  -  total flux cleaned = 0.00142692 Jy
! Total flux subtracted in 200 components = 0.00142692 Jy
! Clean residual min=-0.002738 max=0.002643 Jy/beam
! Clean residual mean=0.000010 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.255109 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.255109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128853Jy  sigma=1.872861
! Fit after  self-cal, rms=0.128862Jy  sigma=1.872802
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128373 Jy
! Component: 100  -  total flux cleaned = 0.000253448 Jy
! Component: 150  -  total flux cleaned = 0.000271707 Jy
! Component: 200  -  total flux cleaned = 0.00025528 Jy
! Total flux subtracted in 200 components = 0.00025528 Jy
! Clean residual min=-0.002727 max=0.002623 Jy/beam
! Clean residual mean=0.000010 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.255365 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 0.255365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128855Jy  sigma=1.872712
! Fit after  self-cal, rms=0.128857Jy  sigma=1.872698
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128857Jy  sigma=1.872698
! Fit after  self-cal, rms=0.128558Jy  sigma=1.872609
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.598 mas, bmaj=2.929 mas, bpa=84.72 degrees
! Estimated noise=0.472389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962548 Jy
! Component: 100  -  total flux cleaned = 0.000998586 Jy
! Component: 150  -  total flux cleaned = 0.00102793 Jy
! Component: 200  -  total flux cleaned = 0.00104074 Jy
! Total flux subtracted in 200 components = 0.00104074 Jy
! Clean residual min=-0.002406 max=0.002588 Jy/beam
! Clean residual mean=0.000025 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.256405 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 50 components and 0.256405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128557Jy  sigma=1.872579
! Fit after  self-cal, rms=0.128551Jy  sigma=1.872550
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193343 Jy
! Component: 100  -  total flux cleaned = 0.000181159 Jy
! Component: 150  -  total flux cleaned = 0.000158221 Jy
! Component: 200  -  total flux cleaned = 0.000147455 Jy
! Total flux subtracted in 200 components = 0.000147455 Jy
! Clean residual min=-0.002364 max=0.002611 Jy/beam
! Clean residual mean=0.000023 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.256553 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 52 components and 0.256553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128554Jy  sigma=1.872587
! Fit after  self-cal, rms=0.128552Jy  sigma=1.872579
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.714 mas, bmaj=1.218 mas, bpa=-6.09 degrees
! Estimated noise=0.348299 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.714 x 1.218 at -6.09 degrees (North through East)
! Clean map  min=-0.0025128  max=0.20626 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6107 mas, bmaj=1.015 mas, bpa=-3.439 degrees
! Estimated noise=0.583208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.159519 Jy
! Component: 100  -  total flux cleaned = 0.205368 Jy
! Component: 150  -  total flux cleaned = 0.225949 Jy
! Component: 200  -  total flux cleaned = 0.236921 Jy
! Total flux subtracted in 200 components = 0.236921 Jy
! Clean residual min=-0.006166 max=0.005496 Jy/beam
! Clean residual mean=0.000010 rms=0.001195 Jy/beam
! Combined flux in latest and established models = 0.236921 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.236921 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.714 mas, bmaj=1.218 mas, bpa=-6.09 degrees
! Estimated noise=0.348299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907554 Jy
! Component: 100  -  total flux cleaned = 0.0137272 Jy
! Component: 150  -  total flux cleaned = 0.0163848 Jy
! Component: 200  -  total flux cleaned = 0.0177831 Jy
! Total flux subtracted in 200 components = 0.0177831 Jy
! Clean residual min=-0.002696 max=0.002697 Jy/beam
! Clean residual mean=0.000015 rms=0.000609 Jy/beam
! Combined flux in latest and established models = 0.254704 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.254704 Jy
! Inverting map 
! Added new window around map position (-10.2, -29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112771 Jy
! Component: 100  -  total flux cleaned = 0.00105444 Jy
! Component: 150  -  total flux cleaned = 0.00132987 Jy
! Component: 200  -  total flux cleaned = 0.0014789 Jy
! Total flux subtracted in 200 components = 0.0014789 Jy
! Clean residual min=-0.002602 max=0.002389 Jy/beam
! Clean residual mean=0.000011 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.256183 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.256183 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.598 mas, bmaj=2.929 mas, bpa=84.72 degrees
! Estimated noise=0.472389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107523 Jy
! Component: 100  -  total flux cleaned = 0.0013595 Jy
! Component: 150  -  total flux cleaned = 0.00152767 Jy
! Component: 200  -  total flux cleaned = 0.00166055 Jy
! Total flux subtracted in 200 components = 0.00166055 Jy
! Clean residual min=-0.002443 max=0.002422 Jy/beam
! Clean residual mean=0.000017 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.257844 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.21555e-05 Jy
! Component: 100  -  total flux cleaned = 0.000169378 Jy
! Component: 150  -  total flux cleaned = 0.000245691 Jy
! Component: 200  -  total flux cleaned = 0.000267331 Jy
! Total flux subtracted in 200 components = 0.000267331 Jy
! Clean residual min=-0.002397 max=0.002413 Jy/beam
! Clean residual mean=0.000015 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.258111 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 51 components and 0.258111 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.714 mas, bmaj=1.218 mas, bpa=-6.09 degrees
! Estimated noise=0.348299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357856 Jy
! Component: 100  -  total flux cleaned = 0.000358782 Jy
! Component: 150  -  total flux cleaned = 0.000399196 Jy
! Component: 200  -  total flux cleaned = 0.000471473 Jy
! Total flux subtracted in 200 components = 0.000471473 Jy
! Clean residual min=-0.002548 max=0.002339 Jy/beam
! Clean residual mean=0.000005 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.258583 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.258583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128489Jy  sigma=1.871767
! Fit after  self-cal, rms=0.128485Jy  sigma=1.871540
wmodel J1350+3034_X_map.mod
! Writing 58 model components to file: J1350+3034_X_map.mod
wobs   J1350+3034_X_uvs.fits
! Writing UV FITS file: J1350+3034_X_uvs.fits
wwins  J1350+3034_X_map.win
! wwins: Wrote 4 windows to J1350+3034_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000290336 Jy
! Component: 100  -  total flux cleaned = -0.000289969 Jy
! Component: 150  -  total flux cleaned = -0.000205021 Jy
! Component: 200  -  total flux cleaned = -0.000287382 Jy
! Component: 250  -  total flux cleaned = -0.000287584 Jy
! Component: 300  -  total flux cleaned = -0.000209349 Jy
! Component: 350  -  total flux cleaned = -0.000326835 Jy
! Component: 400  -  total flux cleaned = -0.000403653 Jy
! Component: 450  -  total flux cleaned = -0.000591508 Jy
! Component: 500  -  total flux cleaned = -0.000554197 Jy
! Component: 550  -  total flux cleaned = -0.000627453 Jy
! Component: 600  -  total flux cleaned = -0.000735452 Jy
! Component: 650  -  total flux cleaned = -0.000805813 Jy
! Component: 700  -  total flux cleaned = -0.000841068 Jy
! Component: 750  -  total flux cleaned = -0.000841286 Jy
! Component: 800  -  total flux cleaned = -0.000977597 Jy
! Component: 850  -  total flux cleaned = -0.0010786 Jy
! Component: 900  -  total flux cleaned = -0.00117835 Jy
! Component: 950  -  total flux cleaned = -0.00130979 Jy
! Component: 1000  -  total flux cleaned = -0.0012441 Jy
! Component: 1050  -  total flux cleaned = -0.00130858 Jy
! Component: 1100  -  total flux cleaned = -0.00127606 Jy
! Component: 1150  -  total flux cleaned = -0.00118159 Jy
! Component: 1200  -  total flux cleaned = -0.00121352 Jy
! Component: 1250  -  total flux cleaned = -0.00124492 Jy
! Component: 1300  -  total flux cleaned = -0.00121398 Jy
! Component: 1350  -  total flux cleaned = -0.0011527 Jy
! Component: 1400  -  total flux cleaned = -0.00118292 Jy
! Component: 1450  -  total flux cleaned = -0.00118292 Jy
! Component: 1500  -  total flux cleaned = -0.00106369 Jy
! Component: 1550  -  total flux cleaned = -0.00109369 Jy
! Component: 1600  -  total flux cleaned = -0.00109388 Jy
! Component: 1650  -  total flux cleaned = -0.00112325 Jy
! Component: 1700  -  total flux cleaned = -0.00112304 Jy
! Component: 1750  -  total flux cleaned = -0.00120969 Jy
! Component: 1800  -  total flux cleaned = -0.00112407 Jy
! Component: 1850  -  total flux cleaned = -0.00126603 Jy
! Component: 1900  -  total flux cleaned = -0.00129461 Jy
! Component: 1950  -  total flux cleaned = -0.00146232 Jy
! Component: 2000  -  total flux cleaned = -0.00149038 Jy
! Component: 2050  -  total flux cleaned = -0.00165592 Jy
! Component: 2100  -  total flux cleaned = -0.00176556 Jy
! Component: 2150  -  total flux cleaned = -0.00187406 Jy
! Component: 2200  -  total flux cleaned = -0.00192796 Jy
! Component: 2250  -  total flux cleaned = -0.00208919 Jy
! Component: 2300  -  total flux cleaned = -0.00206282 Jy
! Component: 2350  -  total flux cleaned = -0.00230138 Jy
! Component: 2400  -  total flux cleaned = -0.00240642 Jy
! Component: 2450  -  total flux cleaned = -0.00240651 Jy
! Component: 2500  -  total flux cleaned = -0.00253688 Jy
! Component: 2550  -  total flux cleaned = -0.00264003 Jy
! Component: 2600  -  total flux cleaned = -0.00271729 Jy
! Component: 2650  -  total flux cleaned = -0.00287047 Jy
! Component: 2700  -  total flux cleaned = -0.00299743 Jy
! Component: 2750  -  total flux cleaned = -0.00309833 Jy
! Component: 2800  -  total flux cleaned = -0.00314839 Jy
! Component: 2850  -  total flux cleaned = -0.00324809 Jy
! Component: 2900  -  total flux cleaned = -0.00327294 Jy
! Component: 2950  -  total flux cleaned = -0.0033963 Jy
! Component: 3000  -  total flux cleaned = -0.00337186 Jy
! Component: 3050  -  total flux cleaned = -0.00346959 Jy
! Component: 3100  -  total flux cleaned = -0.00351827 Jy
! Component: 3150  -  total flux cleaned = -0.00359061 Jy
! Component: 3200  -  total flux cleaned = -0.0037348 Jy
! Component: 3250  -  total flux cleaned = -0.00380644 Jy
! Component: 3300  -  total flux cleaned = -0.00375889 Jy
! Component: 3350  -  total flux cleaned = -0.00385358 Jy
! Component: 3400  -  total flux cleaned = -0.0039239 Jy
! Component: 3450  -  total flux cleaned = -0.00399398 Jy
! Component: 3500  -  total flux cleaned = -0.00406378 Jy
! Component: 3550  -  total flux cleaned = -0.00415614 Jy
! Component: 3600  -  total flux cleaned = -0.00422522 Jy
! Component: 3650  -  total flux cleaned = -0.00422504 Jy
! Component: 3700  -  total flux cleaned = -0.00427062 Jy
! Component: 3750  -  total flux cleaned = -0.00422528 Jy
! Component: 3800  -  total flux cleaned = -0.00422527 Jy
! Component: 3850  -  total flux cleaned = -0.00429283 Jy
! Component: 3900  -  total flux cleaned = -0.00435996 Jy
! Component: 3950  -  total flux cleaned = -0.00436006 Jy
! Component: 4000  -  total flux cleaned = -0.00447096 Jy
! Component: 4050  -  total flux cleaned = -0.00451507 Jy
! Total flux subtracted in 4096 components = -0.00458094 Jy
! Clean residual min=-0.001286 max=0.001271 Jy/beam
! Clean residual mean=0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.254002 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 372 components and 0.254002 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J1350+3034_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.714 x 1.218 at -6.09 degrees (North through East)
! Clean map  min=-0.0024802  max=0.20538 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J1350+3034_X_map.fits
wmodel /scr/pima/rdv91_uvs/J1350+3034_X_map.mod
! Writing 372 model components to file: /scr/pima/rdv91_uvs/J1350+3034_X_map.mod
wobs   /scr/pima/rdv91_uvs/J1350+3034_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J1350+3034_X_uvs.fits
wwins  /scr/pima/rdv91_uvs/J1350+3034_X_map.win
! wwins: Wrote 5 windows to /scr/pima/rdv91_uvs/J1350+3034_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.205381 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000359085 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.524516 0.524516 1.04903 2.09806 4.19613 8.39225 16.7845 33.569 67.138
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.205 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  571.956 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J1350+3034_X_dfm.log closed on Fri Jun 15 11:27:23 2018