! Started logfile: /scr/pima/rdv91_uvs/J0634-2335_S_dfm.log on Fri Jun 15 11:25:14 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv91_uvs/J0634-2335_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J0634-2335_S_uva.fits
! AN table 1: 49 integrations on 1 of 1 possible baselines.
! AN table 2: 117 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.478717 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0634-2335
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 12416 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0634-2335_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 724 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 724 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 724 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 98 telescope corrections were flagged in sub-array 1.
!  A total of 724 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.161825Jy  sigma=17.392054
! Fit after  self-cal, rms=0.482303Jy  sigma=7.016593
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.915 mas, bmaj=8.442 mas, bpa=-5.345 degrees
! Estimated noise=0.823892 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.401084 Jy
! Component: 100  -  total flux cleaned = 0.498105 Jy
! Total flux subtracted in 100 components = 0.498105 Jy
! Clean residual min=-0.013307 max=0.039625 Jy/beam
! Clean residual mean=0.000103 rms=0.004011 Jy/beam
! Combined flux in latest and established models = 0.498105 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.498105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146721Jy  sigma=2.154783
! Fit after  self-cal, rms=0.146676Jy  sigma=2.153856
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442893 Jy
! Component: 100  -  total flux cleaned = 0.0675116 Jy
! Total flux subtracted in 100 components = 0.0675116 Jy
! Clean residual min=-0.009006 max=0.016407 Jy/beam
! Clean residual mean=0.000055 rms=0.002350 Jy/beam
! Combined flux in latest and established models = 0.565616 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.565616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128106Jy  sigma=1.835655
! Fit after  self-cal, rms=0.127972Jy  sigma=1.833358
! Inverting map 
! Added new window around map position (-5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162788 Jy
! Component: 100  -  total flux cleaned = 0.026308 Jy
! Total flux subtracted in 100 components = 0.026308 Jy
! Clean residual min=-0.007860 max=0.009704 Jy/beam
! Clean residual mean=0.000037 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 0.591924 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 18 components and 0.591924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125172Jy  sigma=1.785202
! Fit after  self-cal, rms=0.125091Jy  sigma=1.784137
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.656 mas, bmaj=10.46 mas, bpa=-7.659 degrees
! Estimated noise=0.541666 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102651 Jy
! Component: 100  -  total flux cleaned = 0.0151242 Jy
! Component: 150  -  total flux cleaned = 0.0160027 Jy
! Component: 200  -  total flux cleaned = 0.016689 Jy
! Total flux subtracted in 200 components = 0.016689 Jy
! Clean residual min=-0.005570 max=0.006397 Jy/beam
! Clean residual mean=0.000040 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 0.608613 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 0.608613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124404Jy  sigma=1.769741
! Fit after  self-cal, rms=0.124373Jy  sigma=1.769258
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.656 x 10.46 at -7.659 degrees (North through East)
! Clean map  min=-0.005521  max=0.53224 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FT        0.00*    WZ        0.00*    
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.01     FT        1.00*    HN        0.99     
!   KP        0.98     LA        0.96     MK        1.01     NL        0.99     
!   OV        0.99     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FT        0.00*    WZ        0.00*    
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.99     FT        1.00*    HN        1.06     
!   KP        1.00     LA        0.97     MK        0.99     NL        0.99     
!   OV        1.00     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FT        0.00*    WZ        0.00*    
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.00     FT        1.00*    HN        1.03     
!   KP        1.00     LA        1.01     MK        0.98     NL        0.99     
!   OV        1.00     PT        1.01     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FT        0.00*    WZ        0.00*    
! 
!  A total of 27 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.03     FT        1.00*    HN        1.03     
!   KP        1.01     LA        1.03     MK        1.00     NL        1.00     
!   OV        1.01     PT        1.00     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.124373Jy  sigma=1.769258
! Fit after  self-cal, rms=0.123873Jy  sigma=1.756564
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=10.55 mas, bpa=-7.014 degrees
! Estimated noise=0.544829 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000799609 Jy
! Component: 100  -  total flux cleaned = 0.000640463 Jy
! Component: 150  -  total flux cleaned = 0.000510332 Jy
! Component: 200  -  total flux cleaned = 0.000398858 Jy
! Total flux subtracted in 200 components = 0.000398858 Jy
! Clean residual min=-0.005103 max=0.005167 Jy/beam
! Clean residual mean=0.000036 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.609012 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 44 components and 0.609012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123779Jy  sigma=1.755211
! Fit after  self-cal, rms=0.123778Jy  sigma=1.754997
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123778Jy  sigma=1.754997
! Fit after  self-cal, rms=0.122972Jy  sigma=1.741766
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=10.56 mas, bpa=-7.028 degrees
! Estimated noise=0.544542 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061171 Jy
! Component: 100  -  total flux cleaned = 0.000425868 Jy
! Component: 150  -  total flux cleaned = 0.000372567 Jy
! Component: 200  -  total flux cleaned = 0.000276102 Jy
! Total flux subtracted in 200 components = 0.000276102 Jy
! Clean residual min=-0.004454 max=0.004758 Jy/beam
! Clean residual mean=0.000014 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.609288 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.609288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122913Jy  sigma=1.740969
! Fit after  self-cal, rms=0.122909Jy  sigma=1.740843
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00411157 Jy
! Component: 100  -  total flux cleaned = 0.00474153 Jy
! Component: 150  -  total flux cleaned = 0.00482103 Jy
! Component: 200  -  total flux cleaned = 0.00482146 Jy
! Total flux subtracted in 200 components = 0.00482146 Jy
! Clean residual min=-0.004161 max=0.004110 Jy/beam
! Clean residual mean=0.000013 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.61411 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 73 components and 0.61411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122737Jy  sigma=1.738407
! Fit after  self-cal, rms=0.122719Jy  sigma=1.738229
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122719Jy  sigma=1.738229
! Fit after  self-cal, rms=0.122717Jy  sigma=1.726338
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=10.56 mas, bpa=-7.001 degrees
! Estimated noise=0.544804 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162899 Jy
! Component: 100  -  total flux cleaned = 0.00169661 Jy
! Component: 150  -  total flux cleaned = 0.00152603 Jy
! Component: 200  -  total flux cleaned = 0.00142098 Jy
! Total flux subtracted in 200 components = 0.00142098 Jy
! Clean residual min=-0.003336 max=0.003849 Jy/beam
! Clean residual mean=0.000002 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.615531 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.615531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122648Jy  sigma=1.725327
! Fit after  self-cal, rms=0.122664Jy  sigma=1.725232
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00035637 Jy
! Component: 100  -  total flux cleaned = 0.000310202 Jy
! Component: 150  -  total flux cleaned = 0.000268051 Jy
! Component: 200  -  total flux cleaned = 0.000228712 Jy
! Total flux subtracted in 200 components = 0.000228712 Jy
! Clean residual min=-0.003243 max=0.003787 Jy/beam
! Clean residual mean=0.000002 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.615759 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.615759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122633Jy  sigma=1.724800
! Fit after  self-cal, rms=0.122632Jy  sigma=1.724779
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122632Jy  sigma=1.724779
! Fit after  self-cal, rms=0.122617Jy  sigma=1.724686
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.098 mas, bmaj=19.93 mas, bpa=-7.298 degrees
! Estimated noise=0.63969 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.8631e-05 Jy
! Component: 100  -  total flux cleaned = 0.000136897 Jy
! Component: 150  -  total flux cleaned = 8.25931e-05 Jy
! Component: 200  -  total flux cleaned = -2.06207e-05 Jy
! Total flux subtracted in 200 components = -2.06207e-05 Jy
! Clean residual min=-0.003380 max=0.003842 Jy/beam
! Clean residual mean=0.000005 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.615739 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 108 components and 0.615739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122609Jy  sigma=1.724553
! Fit after  self-cal, rms=0.122605Jy  sigma=1.724527
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.27552e-05 Jy
! Component: 100  -  total flux cleaned = -7.10037e-05 Jy
! Component: 150  -  total flux cleaned = -0.000113501 Jy
! Component: 200  -  total flux cleaned = -0.000112999 Jy
! Total flux subtracted in 200 components = -0.000112999 Jy
! Clean residual min=-0.003396 max=0.003775 Jy/beam
! Clean residual mean=0.000005 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.615626 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 119 components and 0.615626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122602Jy  sigma=1.724475
! Fit after  self-cal, rms=0.122601Jy  sigma=1.724463
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.661 mas, bmaj=10.55 mas, bpa=-6.99 degrees
! Estimated noise=0.544663 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.661 x 10.55 at -6.99 degrees (North through East)
! Clean map  min=-0.0030531  max=0.53173 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122601Jy  sigma=1.724463
! Fit after  self-cal, rms=0.114992Jy  sigma=1.578787
! Inverting map and beam 
! Estimated beam: bmin=3.661 mas, bmaj=10.54 mas, bpa=-6.987 degrees
! Estimated noise=0.544423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000118266 Jy
! Component: 100  -  total flux cleaned = -0.000194084 Jy
! Component: 150  -  total flux cleaned = -0.000193638 Jy
! Component: 200  -  total flux cleaned = -0.000225034 Jy
! Total flux subtracted in 200 components = -0.000225034 Jy
! Clean residual min=-0.003178 max=0.003738 Jy/beam
! Clean residual mean=0.000002 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.615401 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 142 components and 0.615401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114973Jy  sigma=1.578481
! Fit after  self-cal, rms=0.114971Jy  sigma=1.578462
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.28116e-05 Jy
! Component: 100  -  total flux cleaned = -3.29311e-05 Jy
! Component: 150  -  total flux cleaned = -3.28793e-05 Jy
! Component: 200  -  total flux cleaned = -3.21125e-05 Jy
! Total flux subtracted in 200 components = -3.21125e-05 Jy
! Clean residual min=-0.003119 max=0.003750 Jy/beam
! Clean residual mean=0.000002 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.615369 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 148 components and 0.615369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114958Jy  sigma=1.578271
! Fit after  self-cal, rms=0.114957Jy  sigma=1.578261
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114957Jy  sigma=1.578261
! Fit after  self-cal, rms=0.114965Jy  sigma=1.578243
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.905 mas, bmaj=8.395 mas, bpa=-5.121 degrees
! Estimated noise=0.826636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.400619 Jy
! Component: 100  -  total flux cleaned = 0.500281 Jy
! Component: 150  -  total flux cleaned = 0.546354 Jy
! Component: 200  -  total flux cleaned = 0.57089 Jy
! Total flux subtracted in 200 components = 0.57089 Jy
! Clean residual min=-0.008043 max=0.012416 Jy/beam
! Clean residual mean=0.000035 rms=0.001840 Jy/beam
! Combined flux in latest and established models = 0.57089 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.57089 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=10.54 mas, bpa=-6.981 degrees
! Estimated noise=0.544419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0196633 Jy
! Component: 100  -  total flux cleaned = 0.0299314 Jy
! Component: 150  -  total flux cleaned = 0.0361973 Jy
! Component: 200  -  total flux cleaned = 0.0402875 Jy
! Total flux subtracted in 200 components = 0.0402875 Jy
! Clean residual min=-0.003792 max=0.003910 Jy/beam
! Clean residual mean=0.000004 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.611178 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.611178 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.102 mas, bmaj=19.92 mas, bpa=-7.281 degrees
! Estimated noise=0.639412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030459 Jy
! Component: 100  -  total flux cleaned = 0.0040876 Jy
! Component: 150  -  total flux cleaned = 0.00418035 Jy
! Component: 200  -  total flux cleaned = 0.00418033 Jy
! Total flux subtracted in 200 components = 0.00418033 Jy
! Clean residual min=-0.003610 max=0.003945 Jy/beam
! Clean residual mean=0.000004 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.615358 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.49914e-05 Jy
! Component: 100  -  total flux cleaned = 3.47781e-05 Jy
! Component: 150  -  total flux cleaned = 3.44593e-05 Jy
! Component: 200  -  total flux cleaned = 3.50213e-05 Jy
! Total flux subtracted in 200 components = 3.50213e-05 Jy
! Clean residual min=-0.003564 max=0.003945 Jy/beam
! Clean residual mean=0.000004 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.615393 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 90 components and 0.615393 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.66 mas, bmaj=10.54 mas, bpa=-6.981 degrees
! Estimated noise=0.544419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000384298 Jy
! Component: 100  -  total flux cleaned = -0.000306406 Jy
! Component: 150  -  total flux cleaned = -0.000305863 Jy
! Component: 200  -  total flux cleaned = -0.000305046 Jy
! Total flux subtracted in 200 components = -0.000305046 Jy
! Clean residual min=-0.003569 max=0.003700 Jy/beam
! Clean residual mean=0.000002 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.615088 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.615088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115061Jy  sigma=1.579485
! Fit after  self-cal, rms=0.115037Jy  sigma=1.579278
wmodel J0634-2335_S_map.mod
! Writing 104 model components to file: J0634-2335_S_map.mod
wobs   J0634-2335_S_uvs.fits
! Writing UV FITS file: J0634-2335_S_uvs.fits
wwins  J0634-2335_S_map.win
! wwins: Wrote 3 windows to J0634-2335_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122307 Jy
! Component: 100  -  total flux cleaned = 0.00238702 Jy
! Component: 150  -  total flux cleaned = 0.00273426 Jy
! Component: 200  -  total flux cleaned = 0.00306401 Jy
! Component: 250  -  total flux cleaned = 0.00338097 Jy
! Component: 300  -  total flux cleaned = 0.00343217 Jy
! Component: 350  -  total flux cleaned = 0.00358253 Jy
! Component: 400  -  total flux cleaned = 0.00372791 Jy
! Component: 450  -  total flux cleaned = 0.00382125 Jy
! Component: 500  -  total flux cleaned = 0.00404983 Jy
! Component: 550  -  total flux cleaned = 0.00422941 Jy
! Component: 600  -  total flux cleaned = 0.00466806 Jy
! Component: 650  -  total flux cleaned = 0.00483953 Jy
! Component: 700  -  total flux cleaned = 0.00521853 Jy
! Component: 750  -  total flux cleaned = 0.00550802 Jy
! Component: 800  -  total flux cleaned = 0.0057932 Jy
! Component: 850  -  total flux cleaned = 0.00619324 Jy
! Component: 900  -  total flux cleaned = 0.00654732 Jy
! Component: 950  -  total flux cleaned = 0.00689519 Jy
! Component: 1000  -  total flux cleaned = 0.00720015 Jy
! Component: 1050  -  total flux cleaned = 0.00738725 Jy
! Component: 1100  -  total flux cleaned = 0.00757253 Jy
! Component: 1150  -  total flux cleaned = 0.00793824 Jy
! Component: 1200  -  total flux cleaned = 0.00811785 Jy
! Component: 1250  -  total flux cleaned = 0.00829557 Jy
! Component: 1300  -  total flux cleaned = 0.00840135 Jy
! Component: 1350  -  total flux cleaned = 0.00867914 Jy
! Component: 1400  -  total flux cleaned = 0.00881646 Jy
! Component: 1450  -  total flux cleaned = 0.00901986 Jy
! Component: 1500  -  total flux cleaned = 0.00922024 Jy
! Component: 1550  -  total flux cleaned = 0.0093526 Jy
! Component: 1600  -  total flux cleaned = 0.0096145 Jy
! Component: 1650  -  total flux cleaned = 0.00984111 Jy
! Component: 1700  -  total flux cleaned = 0.0101289 Jy
! Component: 1750  -  total flux cleaned = 0.0102554 Jy
! Component: 1800  -  total flux cleaned = 0.0104436 Jy
! Component: 1850  -  total flux cleaned = 0.0106295 Jy
! Component: 1900  -  total flux cleaned = 0.0107222 Jy
! Component: 1950  -  total flux cleaned = 0.0109047 Jy
! Component: 2000  -  total flux cleaned = 0.0110251 Jy
! Component: 2050  -  total flux cleaned = 0.011234 Jy
! Component: 2100  -  total flux cleaned = 0.0112043 Jy
! Component: 2150  -  total flux cleaned = 0.0113804 Jy
! Component: 2200  -  total flux cleaned = 0.0114675 Jy
! Component: 2250  -  total flux cleaned = 0.0115828 Jy
! Component: 2300  -  total flux cleaned = 0.0116397 Jy
! Component: 2350  -  total flux cleaned = 0.0116966 Jy
! Component: 2400  -  total flux cleaned = 0.0117806 Jy
! Component: 2450  -  total flux cleaned = 0.0118919 Jy
! Component: 2500  -  total flux cleaned = 0.0118367 Jy
! Component: 2550  -  total flux cleaned = 0.0120009 Jy
! Component: 2600  -  total flux cleaned = 0.0120009 Jy
! Component: 2650  -  total flux cleaned = 0.0121357 Jy
! Component: 2700  -  total flux cleaned = 0.0121621 Jy
! Component: 2750  -  total flux cleaned = 0.0122151 Jy
! Component: 2800  -  total flux cleaned = 0.0122679 Jy
! Component: 2850  -  total flux cleaned = 0.0122416 Jy
! Component: 2900  -  total flux cleaned = 0.0122934 Jy
! Component: 2950  -  total flux cleaned = 0.0122163 Jy
! Component: 3000  -  total flux cleaned = 0.0123184 Jy
! Component: 3050  -  total flux cleaned = 0.0122681 Jy
! Component: 3100  -  total flux cleaned = 0.0123184 Jy
! Component: 3150  -  total flux cleaned = 0.0123432 Jy
! Component: 3200  -  total flux cleaned = 0.0123684 Jy
! Component: 3250  -  total flux cleaned = 0.0124666 Jy
! Component: 3300  -  total flux cleaned = 0.0124416 Jy
! Component: 3350  -  total flux cleaned = 0.0124173 Jy
! Component: 3400  -  total flux cleaned = 0.0123693 Jy
! Component: 3450  -  total flux cleaned = 0.0124172 Jy
! Component: 3500  -  total flux cleaned = 0.0123225 Jy
! Component: 3550  -  total flux cleaned = 0.0124407 Jy
! Component: 3600  -  total flux cleaned = 0.0123705 Jy
! Component: 3650  -  total flux cleaned = 0.0123472 Jy
! Component: 3700  -  total flux cleaned = 0.0123933 Jy
! Component: 3750  -  total flux cleaned = 0.0124162 Jy
! Component: 3800  -  total flux cleaned = 0.012325 Jy
! Component: 3850  -  total flux cleaned = 0.0123705 Jy
! Component: 3900  -  total flux cleaned = 0.0123705 Jy
! Component: 3950  -  total flux cleaned = 0.0123704 Jy
! Component: 4000  -  total flux cleaned = 0.0124371 Jy
! Component: 4050  -  total flux cleaned = 0.0125693 Jy
! Total flux subtracted in 4096 components = 0.0124816 Jy
! Clean residual min=-0.001191 max=0.001114 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.627569 Jy
keep
! Adding 278 model components to the UV plane model.
! The established model now contains 382 components and 0.627569 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J0634-2335_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.66 x 10.54 at -6.981 degrees (North through East)
! Clean map  min=-0.0023007  max=0.53218 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J0634-2335_S_map.fits
wmodel /scr/pima/rdv91_uvs/J0634-2335_S_map.mod
! Writing 382 model components to file: /scr/pima/rdv91_uvs/J0634-2335_S_map.mod
wobs   /scr/pima/rdv91_uvs/J0634-2335_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J0634-2335_S_uvs.fits
wwins  /scr/pima/rdv91_uvs/J0634-2335_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rdv91_uvs/J0634-2335_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.532176 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000403758 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.227608 0.227608 0.455216 0.910432 1.82086 3.64173 7.28346 14.5669 29.1338 58.2676
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.532 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1318.06 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J0634-2335_S_dfm.log closed on Fri Jun 15 11:25:18 2018