! Started logfile: /scr/pima/rdv91_uvs/J0408-0122_S_dfm.log on Fri Jun 15 11:24:18 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv91_uvs/J0408-0122_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J0408-0122_S_uva.fits
! AN table 1: 180 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.990247 visibilities/baseline/integration-bin.
! Found source: J0408-0122
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 32084 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0408-0122_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015574Jy  sigma=18.475018
! Fit after  self-cal, rms=0.903171Jy  sigma=16.352846
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.808 mas, bmaj=6.778 mas, bpa=-3.032 degrees
! Estimated noise=0.449549 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0793935 Jy
! Component: 100  -  total flux cleaned = 0.0989949 Jy
! Total flux subtracted in 100 components = 0.0989949 Jy
! Clean residual min=-0.005567 max=0.009570 Jy/beam
! Clean residual mean=0.000011 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.0989949 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0989949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112225Jy  sigma=1.902530
! Fit after  self-cal, rms=0.111713Jy  sigma=1.893197
! Inverting map 
! Added new window around map position (3, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101471 Jy
! Component: 100  -  total flux cleaned = 0.0156846 Jy
! Total flux subtracted in 100 components = 0.0156846 Jy
! Clean residual min=-0.004691 max=0.006224 Jy/beam
! Clean residual mean=0.000003 rms=0.001252 Jy/beam
! Combined flux in latest and established models = 0.11468 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.11468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110787Jy  sigma=1.871827
! Fit after  self-cal, rms=0.110733Jy  sigma=1.870725
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.434 mas, bmaj=7.923 mas, bpa=-3.015 degrees
! Estimated noise=0.225387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00494836 Jy
! Component: 100  -  total flux cleaned = 0.00755751 Jy
! Component: 150  -  total flux cleaned = 0.00905688 Jy
! Component: 200  -  total flux cleaned = 0.00943232 Jy
! Total flux subtracted in 200 components = 0.00943232 Jy
! Clean residual min=-0.001963 max=0.001956 Jy/beam
! Clean residual mean=0.000000 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.124112 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 41 components and 0.124112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110529Jy  sigma=1.866079
! Fit after  self-cal, rms=0.110520Jy  sigma=1.865676
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.434 x 7.923 at -3.015 degrees (North through East)
! Clean map  min=-0.0018058  max=0.10228 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.01     KP        1.00     
!   LA        0.95     MK        0.98     NL        0.99     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.99     KP        1.02     
!   LA        0.95     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.06     KP        1.02     
!   LA        1.00     MK        1.02     NL        0.97     OV        1.02     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.05     KP        1.03     
!   LA        1.03     MK        0.94     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.110520Jy  sigma=1.865676
! Fit after  self-cal, rms=0.109447Jy  sigma=1.864073
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.426 mas, bmaj=7.88 mas, bpa=-2.81 degrees
! Estimated noise=0.224103 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124538 Jy
! Component: 100  -  total flux cleaned = 0.00128463 Jy
! Component: 150  -  total flux cleaned = 0.00122946 Jy
! Component: 200  -  total flux cleaned = 0.00122993 Jy
! Total flux subtracted in 200 components = 0.00122993 Jy
! Clean residual min=-0.001738 max=0.001981 Jy/beam
! Clean residual mean=-0.000003 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.125342 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 47 components and 0.125342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109422Jy  sigma=1.863720
! Fit after  self-cal, rms=0.109437Jy  sigma=1.863603
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109437Jy  sigma=1.863603
! Fit after  self-cal, rms=0.108757Jy  sigma=1.863052
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.421 mas, bmaj=7.864 mas, bpa=-2.847 degrees
! Estimated noise=0.223941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000825641 Jy
! Component: 100  -  total flux cleaned = 0.000803949 Jy
! Component: 150  -  total flux cleaned = 0.000782423 Jy
! Component: 200  -  total flux cleaned = 0.000799632 Jy
! Total flux subtracted in 200 components = 0.000799632 Jy
! Clean residual min=-0.001580 max=0.001824 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.126141 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.126141 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108745Jy  sigma=1.862882
! Fit after  self-cal, rms=0.108734Jy  sigma=1.862819
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-64.5, -116).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130917 Jy
! Component: 100  -  total flux cleaned = 0.00134282 Jy
! Component: 150  -  total flux cleaned = 0.00136914 Jy
! Component: 200  -  total flux cleaned = 0.00139366 Jy
! Total flux subtracted in 200 components = 0.00139366 Jy
! Clean residual min=-0.001564 max=0.001696 Jy/beam
! Clean residual mean=-0.000002 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.127535 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 0.127535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108706Jy  sigma=1.862398
! Fit after  self-cal, rms=0.108703Jy  sigma=1.862351
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108703Jy  sigma=1.862351
! Fit after  self-cal, rms=0.108465Jy  sigma=1.862302
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.416 mas, bmaj=7.855 mas, bpa=-2.861 degrees
! Estimated noise=0.223724 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000657281 Jy
! Component: 100  -  total flux cleaned = 0.000811771 Jy
! Component: 150  -  total flux cleaned = 0.000859032 Jy
! Component: 200  -  total flux cleaned = 0.000903022 Jy
! Total flux subtracted in 200 components = 0.000903022 Jy
! Clean residual min=-0.001588 max=0.001719 Jy/beam
! Clean residual mean=-0.000002 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.128438 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 0.128438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108453Jy  sigma=1.862114
! Fit after  self-cal, rms=0.108448Jy  sigma=1.862106
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.5, 91.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137714 Jy
! Component: 100  -  total flux cleaned = 0.00150573 Jy
! Component: 150  -  total flux cleaned = 0.00153423 Jy
! Component: 200  -  total flux cleaned = 0.00153489 Jy
! Total flux subtracted in 200 components = 0.00153489 Jy
! Clean residual min=-0.001645 max=0.001635 Jy/beam
! Clean residual mean=-0.000001 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.129973 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 97 components and 0.129973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108424Jy  sigma=1.861673
! Fit after  self-cal, rms=0.108423Jy  sigma=1.861630
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108423Jy  sigma=1.861630
! Fit after  self-cal, rms=0.108304Jy  sigma=1.861599
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.574 mas, bmaj=12.38 mas, bpa=-1.978 degrees
! Estimated noise=0.268538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414316 Jy
! Component: 100  -  total flux cleaned = 0.000678946 Jy
! Component: 150  -  total flux cleaned = 0.000823614 Jy
! Component: 200  -  total flux cleaned = 0.0009037 Jy
! Total flux subtracted in 200 components = 0.0009037 Jy
! Clean residual min=-0.001481 max=0.001572 Jy/beam
! Clean residual mean=-0.000002 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.130877 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 115 components and 0.130877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108299Jy  sigma=1.861509
! Fit after  self-cal, rms=0.108296Jy  sigma=1.861495
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136607 Jy
! Component: 100  -  total flux cleaned = 0.000181149 Jy
! Component: 150  -  total flux cleaned = 0.000221914 Jy
! Component: 200  -  total flux cleaned = 0.000247314 Jy
! Total flux subtracted in 200 components = 0.000247314 Jy
! Clean residual min=-0.001456 max=0.001537 Jy/beam
! Clean residual mean=-0.000003 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.131124 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 127 components and 0.131124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108294Jy  sigma=1.861456
! Fit after  self-cal, rms=0.108295Jy  sigma=1.861450
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=7.85 mas, bpa=-2.871 degrees
! Estimated noise=0.223631 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.413 x 7.85 at -2.871 degrees (North through East)
! Clean map  min=-0.0016137  max=0.10125 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.796 mas, bmaj=6.72 mas, bpa=-2.924 degrees
! Estimated noise=0.442715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0784233 Jy
! Component: 100  -  total flux cleaned = 0.100061 Jy
! Component: 150  -  total flux cleaned = 0.110261 Jy
! Component: 200  -  total flux cleaned = 0.116131 Jy
! Total flux subtracted in 200 components = 0.116131 Jy
! Clean residual min=-0.004423 max=0.005470 Jy/beam
! Clean residual mean=0.000004 rms=0.001175 Jy/beam
! Combined flux in latest and established models = 0.116131 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.116131 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=7.85 mas, bpa=-2.871 degrees
! Estimated noise=0.223631 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00544214 Jy
! Component: 100  -  total flux cleaned = 0.0085413 Jy
! Component: 150  -  total flux cleaned = 0.0105763 Jy
! Component: 200  -  total flux cleaned = 0.0119655 Jy
! Total flux subtracted in 200 components = 0.0119655 Jy
! Clean residual min=-0.001686 max=0.001717 Jy/beam
! Clean residual mean=0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.128097 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 50 components and 0.128097 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.574 mas, bmaj=12.38 mas, bpa=-1.978 degrees
! Estimated noise=0.268538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101632 Jy
! Component: 100  -  total flux cleaned = 0.00159048 Jy
! Component: 150  -  total flux cleaned = 0.00204118 Jy
! Component: 200  -  total flux cleaned = 0.00232475 Jy
! Total flux subtracted in 200 components = 0.00232475 Jy
! Clean residual min=-0.001533 max=0.001619 Jy/beam
! Clean residual mean=-0.000002 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.130422 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012237 Jy
! Component: 100  -  total flux cleaned = 0.000209535 Jy
! Component: 150  -  total flux cleaned = 0.000288826 Jy
! Component: 200  -  total flux cleaned = 0.00034303 Jy
! Total flux subtracted in 200 components = 0.00034303 Jy
! Clean residual min=-0.001478 max=0.001581 Jy/beam
! Clean residual mean=-0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.130765 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 89 components and 0.130765 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.413 mas, bmaj=7.85 mas, bpa=-2.871 degrees
! Estimated noise=0.223631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000515452 Jy
! Component: 100  -  total flux cleaned = -0.000617063 Jy
! Component: 150  -  total flux cleaned = -0.000616486 Jy
! Component: 200  -  total flux cleaned = -0.000617082 Jy
! Total flux subtracted in 200 components = -0.000617082 Jy
! Clean residual min=-0.001672 max=0.001589 Jy/beam
! Clean residual mean=-0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.130148 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 110 components and 0.130148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108325Jy  sigma=1.861854
! Fit after  self-cal, rms=0.108323Jy  sigma=1.861770
wmodel J0408-0122_S_map.mod
! Writing 110 model components to file: J0408-0122_S_map.mod
wobs   J0408-0122_S_uvs.fits
! Writing UV FITS file: J0408-0122_S_uvs.fits
wwins  J0408-0122_S_map.win
! wwins: Wrote 4 windows to J0408-0122_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 9.98875e-06 Jy
! Component: 100  -  total flux cleaned = -1.62411e-05 Jy
! Component: 150  -  total flux cleaned = -9.43922e-05 Jy
! Component: 200  -  total flux cleaned = -0.000192535 Jy
! Component: 250  -  total flux cleaned = -0.000262877 Jy
! Component: 300  -  total flux cleaned = -0.000308483 Jy
! Component: 350  -  total flux cleaned = -0.000286781 Jy
! Component: 400  -  total flux cleaned = -0.00035245 Jy
! Component: 450  -  total flux cleaned = -0.000330912 Jy
! Component: 500  -  total flux cleaned = -0.000330639 Jy
! Component: 550  -  total flux cleaned = -0.000351243 Jy
! Component: 600  -  total flux cleaned = -0.000310593 Jy
! Component: 650  -  total flux cleaned = -0.00033037 Jy
! Component: 700  -  total flux cleaned = -0.000349458 Jy
! Component: 750  -  total flux cleaned = -0.000349119 Jy
! Component: 800  -  total flux cleaned = -0.00036775 Jy
! Component: 850  -  total flux cleaned = -0.000367281 Jy
! Component: 900  -  total flux cleaned = -0.000404236 Jy
! Component: 950  -  total flux cleaned = -0.000404159 Jy
! Component: 1000  -  total flux cleaned = -0.000475612 Jy
! Component: 1050  -  total flux cleaned = -0.00049333 Jy
! Component: 1100  -  total flux cleaned = -0.000493376 Jy
! Component: 1150  -  total flux cleaned = -0.000527781 Jy
! Component: 1200  -  total flux cleaned = -0.00051077 Jy
! Component: 1250  -  total flux cleaned = -0.000527532 Jy
! Component: 1300  -  total flux cleaned = -0.000561241 Jy
! Component: 1350  -  total flux cleaned = -0.000577663 Jy
! Component: 1400  -  total flux cleaned = -0.000561271 Jy
! Component: 1450  -  total flux cleaned = -0.00064211 Jy
! Component: 1500  -  total flux cleaned = -0.000690068 Jy
! Component: 1550  -  total flux cleaned = -0.000737463 Jy
! Component: 1600  -  total flux cleaned = -0.000816129 Jy
! Component: 1650  -  total flux cleaned = -0.000862579 Jy
! Component: 1700  -  total flux cleaned = -0.000878097 Jy
! Component: 1750  -  total flux cleaned = -0.000985037 Jy
! Component: 1800  -  total flux cleaned = -0.00100002 Jy
! Component: 1850  -  total flux cleaned = -0.00104505 Jy
! Component: 1900  -  total flux cleaned = -0.00107454 Jy
! Component: 1950  -  total flux cleaned = -0.001104 Jy
! Component: 2000  -  total flux cleaned = -0.00116238 Jy
! Component: 2050  -  total flux cleaned = -0.00117691 Jy
! Component: 2100  -  total flux cleaned = -0.00126323 Jy
! Component: 2150  -  total flux cleaned = -0.00127731 Jy
! Component: 2200  -  total flux cleaned = -0.00133407 Jy
! Component: 2250  -  total flux cleaned = -0.00139029 Jy
! Component: 2300  -  total flux cleaned = -0.00146036 Jy
! Component: 2350  -  total flux cleaned = -0.00151569 Jy
! Component: 2400  -  total flux cleaned = -0.00159827 Jy
! Component: 2450  -  total flux cleaned = -0.00163911 Jy
! Component: 2500  -  total flux cleaned = -0.00161207 Jy
! Component: 2550  -  total flux cleaned = -0.00170653 Jy
! Component: 2600  -  total flux cleaned = -0.0017065 Jy
! Component: 2650  -  total flux cleaned = -0.00174634 Jy
! Component: 2700  -  total flux cleaned = -0.00177287 Jy
! Component: 2750  -  total flux cleaned = -0.00179899 Jy
! Component: 2800  -  total flux cleaned = -0.00185095 Jy
! Component: 2850  -  total flux cleaned = -0.00187692 Jy
! Component: 2900  -  total flux cleaned = -0.00194106 Jy
! Component: 2950  -  total flux cleaned = -0.00194104 Jy
! Component: 3000  -  total flux cleaned = -0.00196646 Jy
! Component: 3050  -  total flux cleaned = -0.00200429 Jy
! Component: 3100  -  total flux cleaned = -0.00205413 Jy
! Component: 3150  -  total flux cleaned = -0.00205404 Jy
! Component: 3200  -  total flux cleaned = -0.00207872 Jy
! Component: 3250  -  total flux cleaned = -0.00212774 Jy
! Component: 3300  -  total flux cleaned = -0.00216438 Jy
! Component: 3350  -  total flux cleaned = -0.0021766 Jy
! Component: 3400  -  total flux cleaned = -0.00218857 Jy
! Component: 3450  -  total flux cleaned = -0.0022363 Jy
! Component: 3500  -  total flux cleaned = -0.00223633 Jy
! Component: 3550  -  total flux cleaned = -0.00221276 Jy
! Component: 3600  -  total flux cleaned = -0.00225985 Jy
! Component: 3650  -  total flux cleaned = -0.00233004 Jy
! Component: 3700  -  total flux cleaned = -0.00233005 Jy
! Component: 3750  -  total flux cleaned = -0.00234151 Jy
! Component: 3800  -  total flux cleaned = -0.00236454 Jy
! Component: 3850  -  total flux cleaned = -0.00239887 Jy
! Component: 3900  -  total flux cleaned = -0.00245571 Jy
! Component: 3950  -  total flux cleaned = -0.00242176 Jy
! Component: 4000  -  total flux cleaned = -0.00245558 Jy
! Component: 4050  -  total flux cleaned = -0.00250033 Jy
! Total flux subtracted in 4096 components = -0.00251142 Jy
! Clean residual min=-0.000647 max=0.000620 Jy/beam
! Clean residual mean=-0.000001 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.127636 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 387 components and 0.127636 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J0408-0122_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.413 x 7.85 at -2.871 degrees (North through East)
! Clean map  min=-0.0012004  max=0.10114 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J0408-0122_S_map.fits
wmodel /scr/pima/rdv91_uvs/J0408-0122_S_map.mod
! Writing 387 model components to file: /scr/pima/rdv91_uvs/J0408-0122_S_map.mod
wobs   /scr/pima/rdv91_uvs/J0408-0122_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J0408-0122_S_uvs.fits
wwins  /scr/pima/rdv91_uvs/J0408-0122_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rdv91_uvs/J0408-0122_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.101137 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000203514 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.603678 0.603678 1.20736 2.41471 4.82942 9.65885 19.3177 38.6354 77.2708
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.101 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  496.953 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J0408-0122_S_dfm.log closed on Fri Jun 15 11:24:23 2018