! Started logfile: /scr/pima/rdv91_uvs/J0406-3826_S_dfm.log on Fri Jun 15 11:24:12 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv91_uvs/J0406-3826_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J0406-3826_S_uva.fits
! AN table 1: 118 integrations on 21 of 21 possible baselines.
! AN table 2: 41 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.384997 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0406-3826
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 5584 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0406-3826_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 584 telescope corrections were flagged in sub-array 1.
!  A total of 194 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 584 telescope corrections were flagged in sub-array 1.
!  A total of 194 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 584 telescope corrections were flagged in sub-array 1.
!  A total of 194 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 584 telescope corrections were flagged in sub-array 1.
!  A total of 194 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.768865Jy  sigma=17.747395
! Fit after  self-cal, rms=0.512895Jy  sigma=5.273031
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.851 mas, bmaj=9.12 mas, bpa=-8.527 degrees
! Estimated noise=2.01754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.13564 Jy
! Component: 100  -  total flux cleaned = 1.38377 Jy
! Total flux subtracted in 100 components = 1.38377 Jy
! Clean residual min=-0.047926 max=0.103345 Jy/beam
! Clean residual mean=-0.000533 rms=0.012339 Jy/beam
! Combined flux in latest and established models = 1.38377 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.38377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.243190Jy  sigma=2.436003
! Fit after  self-cal, rms=0.243193Jy  sigma=2.435871
! Inverting map 
! Added new window around map position (0.5, -15.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0939565 Jy
! Component: 100  -  total flux cleaned = 0.143602 Jy
! Total flux subtracted in 100 components = 0.143602 Jy
! Clean residual min=-0.040828 max=0.063307 Jy/beam
! Clean residual mean=-0.000103 rms=0.008434 Jy/beam
! Combined flux in latest and established models = 1.52737 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 1.52737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195744Jy  sigma=1.920172
! Fit after  self-cal, rms=0.193452Jy  sigma=1.894578
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.457 mas, bmaj=14.1 mas, bpa=-9.835 degrees
! Estimated noise=1.28993 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0624961 Jy
! Component: 100  -  total flux cleaned = 0.0654909 Jy
! Component: 150  -  total flux cleaned = 0.064504 Jy
! Component: 200  -  total flux cleaned = 0.0645055 Jy
! Total flux subtracted in 200 components = 0.0645055 Jy
! Clean residual min=-0.025317 max=0.023747 Jy/beam
! Clean residual mean=-0.000109 rms=0.007281 Jy/beam
! Combined flux in latest and established models = 1.59187 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 44 components and 1.59187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170259Jy  sigma=1.668325
! Fit after  self-cal, rms=0.170025Jy  sigma=1.665624
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.457 x 14.1 at -9.835 degrees (North through East)
! Clean map  min=-0.026696  max=1.4075 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     FT        1.00*    KP        0.98     LA        1.00     
!   NL        1.11     PT        0.99     SC        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     KP        0.96     LA        0.95     MK        0.98     
!   NL        1.00     OV        1.00     PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     FT        1.00*    KP        0.99     LA        1.02     
!   NL        1.13     PT        1.00     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     KP        0.97     LA        0.96     MK        0.99     
!   NL        1.02     OV        1.03     PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     FT        1.00*    KP        0.99     LA        0.99     
!   NL        1.11     PT        1.03     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.01     KP        0.97     LA        1.02     MK        1.00     
!   NL        0.98     OV        1.03     PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     FT        1.00*    KP        1.00     LA        1.00     
!   NL        1.12     PT        1.00     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.02     KP        1.00     LA        1.01     MK        0.99     
!   NL        0.99     OV        0.99     PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.170025Jy  sigma=1.665624
! Fit after  self-cal, rms=0.157882Jy  sigma=1.522139
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.335 mas, bmaj=13.75 mas, bpa=-9.556 degrees
! Estimated noise=1.34394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00402476 Jy
! Component: 100  -  total flux cleaned = -0.00516671 Jy
! Component: 150  -  total flux cleaned = -0.00493652 Jy
! Component: 200  -  total flux cleaned = -0.00454297 Jy
! Total flux subtracted in 200 components = -0.00454297 Jy
! Clean residual min=-0.013564 max=0.010610 Jy/beam
! Clean residual mean=-0.000291 rms=0.003646 Jy/beam
! Combined flux in latest and established models = 1.58733 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 1.58733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157048Jy  sigma=1.512513
! Fit after  self-cal, rms=0.157045Jy  sigma=1.512138
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157045Jy  sigma=1.512138
! Fit after  self-cal, rms=0.156794Jy  sigma=1.506950
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.343 mas, bmaj=13.77 mas, bpa=-9.544 degrees
! Estimated noise=1.34426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00491362 Jy
! Component: 100  -  total flux cleaned = -0.00554357 Jy
! Component: 150  -  total flux cleaned = -0.00538533 Jy
! Component: 200  -  total flux cleaned = -0.00508358 Jy
! Total flux subtracted in 200 components = -0.00508358 Jy
! Clean residual min=-0.012746 max=0.010189 Jy/beam
! Clean residual mean=-0.000287 rms=0.003486 Jy/beam
! Combined flux in latest and established models = 1.58225 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 69 components and 1.58225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156331Jy  sigma=1.501670
! Fit after  self-cal, rms=0.156298Jy  sigma=1.501456
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214245 Jy
! Component: 100  -  total flux cleaned = 0.000349379 Jy
! Component: 150  -  total flux cleaned = 0.000476149 Jy
! Component: 200  -  total flux cleaned = 0.000474893 Jy
! Total flux subtracted in 200 components = 0.000474893 Jy
! Clean residual min=-0.012481 max=0.009851 Jy/beam
! Clean residual mean=-0.000279 rms=0.003466 Jy/beam
! Combined flux in latest and established models = 1.58272 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 1.58272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156089Jy  sigma=1.499280
! Fit after  self-cal, rms=0.156066Jy  sigma=1.499146
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156066Jy  sigma=1.499146
! Fit after  self-cal, rms=0.151039Jy  sigma=1.441484
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.35 mas, bmaj=13.8 mas, bpa=-9.519 degrees
! Estimated noise=1.34419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00308118 Jy
! Component: 100  -  total flux cleaned = -0.00362086 Jy
! Component: 150  -  total flux cleaned = -0.00374355 Jy
! Component: 200  -  total flux cleaned = -0.00374893 Jy
! Total flux subtracted in 200 components = -0.00374893 Jy
! Clean residual min=-0.010109 max=0.009709 Jy/beam
! Clean residual mean=-0.000120 rms=0.002626 Jy/beam
! Combined flux in latest and established models = 1.57897 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 96 components and 1.57897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150786Jy  sigma=1.439497
! Fit after  self-cal, rms=0.150785Jy  sigma=1.439282
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000360822 Jy
! Component: 100  -  total flux cleaned = -0.00035377 Jy
! Component: 150  -  total flux cleaned = -0.00035568 Jy
! Component: 200  -  total flux cleaned = -0.000357339 Jy
! Total flux subtracted in 200 components = -0.000357339 Jy
! Clean residual min=-0.010061 max=0.009539 Jy/beam
! Clean residual mean=-0.000122 rms=0.002598 Jy/beam
! Combined flux in latest and established models = 1.57862 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 108 components and 1.57862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150648Jy  sigma=1.438240
! Fit after  self-cal, rms=0.150638Jy  sigma=1.438161
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150638Jy  sigma=1.438161
! Fit after  self-cal, rms=0.150680Jy  sigma=1.437785
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.749 mas, bmaj=37.07 mas, bpa=-15.81 degrees
! Estimated noise=1.49661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197229 Jy
! Component: 100  -  total flux cleaned = -0.00222476 Jy
! Component: 150  -  total flux cleaned = -0.0024483 Jy
! Component: 200  -  total flux cleaned = -0.00257808 Jy
! Total flux subtracted in 200 components = -0.00257808 Jy
! Clean residual min=-0.008912 max=0.009215 Jy/beam
! Clean residual mean=-0.000149 rms=0.002836 Jy/beam
! Combined flux in latest and established models = 1.57604 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 1.57604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150613Jy  sigma=1.437074
! Fit after  self-cal, rms=0.150580Jy  sigma=1.436920
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167472 Jy
! Component: 100  -  total flux cleaned = -0.000106247 Jy
! Component: 150  -  total flux cleaned = -0.000167413 Jy
! Component: 200  -  total flux cleaned = -0.000284551 Jy
! Total flux subtracted in 200 components = -0.000284551 Jy
! Clean residual min=-0.008902 max=0.009161 Jy/beam
! Clean residual mean=-0.000148 rms=0.002813 Jy/beam
! Combined flux in latest and established models = 1.57575 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 1.57575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150562Jy  sigma=1.436808
! Fit after  self-cal, rms=0.150539Jy  sigma=1.436736
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.351 mas, bmaj=13.81 mas, bpa=-9.511 degrees
! Estimated noise=1.34384 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.351 x 13.81 at -9.511 degrees (North through East)
! Clean map  min=-0.016001  max=1.421 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150539Jy  sigma=1.436736
! Fit after  self-cal, rms=0.132140Jy  sigma=1.202609
! Inverting map and beam 
! Estimated beam: bmin=4.357 mas, bmaj=13.83 mas, bpa=-9.508 degrees
! Estimated noise=1.34482 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.001291 Jy
! Component: 100  -  total flux cleaned = -0.00214192 Jy
! Component: 150  -  total flux cleaned = -0.00223175 Jy
! Component: 200  -  total flux cleaned = -0.00231597 Jy
! Total flux subtracted in 200 components = -0.00231597 Jy
! Clean residual min=-0.010420 max=0.008608 Jy/beam
! Clean residual mean=-0.000115 rms=0.002481 Jy/beam
! Combined flux in latest and established models = 1.57344 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 150 components and 1.57344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131975Jy  sigma=1.201230
! Fit after  self-cal, rms=0.131961Jy  sigma=1.201138
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.46972e-05 Jy
! Component: 100  -  total flux cleaned = -4.71147e-05 Jy
! Component: 150  -  total flux cleaned = -0.000126675 Jy
! Component: 200  -  total flux cleaned = -0.000204971 Jy
! Total flux subtracted in 200 components = -0.000204971 Jy
! Clean residual min=-0.010350 max=0.008475 Jy/beam
! Clean residual mean=-0.000116 rms=0.002469 Jy/beam
! Combined flux in latest and established models = 1.57323 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 156 components and 1.57323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131857Jy  sigma=1.200404
! Fit after  self-cal, rms=0.131852Jy  sigma=1.200363
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131852Jy  sigma=1.200363
! Fit after  self-cal, rms=0.131854Jy  sigma=1.200030
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.857 mas, bmaj=9.16 mas, bpa=-8.649 degrees
! Estimated noise=2.0354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1397 Jy
! Component: 100  -  total flux cleaned = 1.39297 Jy
! Component: 150  -  total flux cleaned = 1.47973 Jy
! Component: 200  -  total flux cleaned = 1.5256 Jy
! Total flux subtracted in 200 components = 1.5256 Jy
! Clean residual min=-0.021083 max=0.030340 Jy/beam
! Clean residual mean=-0.000160 rms=0.005205 Jy/beam
! Combined flux in latest and established models = 1.5256 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.5256 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.356 mas, bmaj=13.83 mas, bpa=-9.489 degrees
! Estimated noise=1.34445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, 16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0351962 Jy
! Component: 100  -  total flux cleaned = 0.050062 Jy
! Component: 150  -  total flux cleaned = 0.0517342 Jy
! Component: 200  -  total flux cleaned = 0.0524302 Jy
! Total flux subtracted in 200 components = 0.0524302 Jy
! Clean residual min=-0.010290 max=0.011338 Jy/beam
! Clean residual mean=-0.000082 rms=0.002732 Jy/beam
! Combined flux in latest and established models = 1.57803 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 44 components and 1.57803 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.754 mas, bmaj=37.12 mas, bpa=-15.78 degrees
! Estimated noise=1.49662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000654118 Jy
! Component: 100  -  total flux cleaned = -0.000840745 Jy
! Component: 150  -  total flux cleaned = -0.00084861 Jy
! Component: 200  -  total flux cleaned = -0.000979331 Jy
! Total flux subtracted in 200 components = -0.000979331 Jy
! Clean residual min=-0.009076 max=0.010026 Jy/beam
! Clean residual mean=-0.000118 rms=0.002894 Jy/beam
! Combined flux in latest and established models = 1.57705 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.23251e-06 Jy
! Component: 100  -  total flux cleaned = 1.99777e-06 Jy
! Component: 150  -  total flux cleaned = -0.000175646 Jy
! Component: 200  -  total flux cleaned = -0.000178614 Jy
! Total flux subtracted in 200 components = -0.000178614 Jy
! Clean residual min=-0.008937 max=0.009782 Jy/beam
! Clean residual mean=-0.000110 rms=0.002860 Jy/beam
! Combined flux in latest and established models = 1.57687 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 72 components and 1.57687 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.356 mas, bmaj=13.83 mas, bpa=-9.489 degrees
! Estimated noise=1.34445 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215962 Jy
! Component: 100  -  total flux cleaned = -0.00040619 Jy
! Component: 150  -  total flux cleaned = -0.000405277 Jy
! Component: 200  -  total flux cleaned = -0.000405944 Jy
! Total flux subtracted in 200 components = -0.000405944 Jy
! Clean residual min=-0.009462 max=0.010502 Jy/beam
! Clean residual mean=-0.000077 rms=0.002510 Jy/beam
! Combined flux in latest and established models = 1.57647 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 90 components and 1.57647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132406Jy  sigma=1.206434
! Fit after  self-cal, rms=0.132249Jy  sigma=1.205098
wmodel J0406-3826_S_map.mod
! Writing 90 model components to file: J0406-3826_S_map.mod
wobs   J0406-3826_S_uvs.fits
! Writing UV FITS file: J0406-3826_S_uvs.fits
wwins  J0406-3826_S_map.win
! wwins: Wrote 4 windows to J0406-3826_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206983 Jy
! Component: 100  -  total flux cleaned = 0.00392076 Jy
! Component: 150  -  total flux cleaned = 0.00531112 Jy
! Component: 200  -  total flux cleaned = 0.00646737 Jy
! Component: 250  -  total flux cleaned = 0.00730768 Jy
! Component: 300  -  total flux cleaned = 0.0081025 Jy
! Component: 350  -  total flux cleaned = 0.00887055 Jy
! Component: 400  -  total flux cleaned = 0.00960752 Jy
! Component: 450  -  total flux cleaned = 0.0102202 Jy
! Component: 500  -  total flux cleaned = 0.0109144 Jy
! Component: 550  -  total flux cleaned = 0.0114928 Jy
! Component: 600  -  total flux cleaned = 0.0122397 Jy
! Component: 650  -  total flux cleaned = 0.0129663 Jy
! Component: 700  -  total flux cleaned = 0.0137622 Jy
! Component: 750  -  total flux cleaned = 0.0146247 Jy
! Component: 800  -  total flux cleaned = 0.0152134 Jy
! Component: 850  -  total flux cleaned = 0.0158716 Jy
! Component: 900  -  total flux cleaned = 0.0165122 Jy
! Component: 950  -  total flux cleaned = 0.0167456 Jy
! Component: 1000  -  total flux cleaned = 0.0172081 Jy
! Component: 1050  -  total flux cleaned = 0.0176594 Jy
! Component: 1100  -  total flux cleaned = 0.0181769 Jy
! Component: 1150  -  total flux cleaned = 0.0186112 Jy
! Component: 1200  -  total flux cleaned = 0.0192496 Jy
! Component: 1250  -  total flux cleaned = 0.0196701 Jy
! Component: 1300  -  total flux cleaned = 0.0200835 Jy
! Component: 1350  -  total flux cleaned = 0.020558 Jy
! Component: 1400  -  total flux cleaned = 0.0210239 Jy
! Component: 1450  -  total flux cleaned = 0.0212867 Jy
! Component: 1500  -  total flux cleaned = 0.0217399 Jy
! Component: 1550  -  total flux cleaned = 0.022187 Jy
! Component: 1600  -  total flux cleaned = 0.0224376 Jy
! Component: 1650  -  total flux cleaned = 0.0228086 Jy
! Component: 1700  -  total flux cleaned = 0.0228692 Jy
! Component: 1750  -  total flux cleaned = 0.0231695 Jy
! Component: 1800  -  total flux cleaned = 0.0234067 Jy
! Component: 1850  -  total flux cleaned = 0.0236991 Jy
! Component: 1900  -  total flux cleaned = 0.0239301 Jy
! Component: 1950  -  total flux cleaned = 0.0241021 Jy
! Component: 2000  -  total flux cleaned = 0.0243852 Jy
! Component: 2050  -  total flux cleaned = 0.0246648 Jy
! Component: 2100  -  total flux cleaned = 0.0251065 Jy
! Component: 2150  -  total flux cleaned = 0.0252159 Jy
! Component: 2200  -  total flux cleaned = 0.0254865 Jy
! Component: 2250  -  total flux cleaned = 0.0258077 Jy
! Component: 2300  -  total flux cleaned = 0.0259142 Jy
! Component: 2350  -  total flux cleaned = 0.0261754 Jy
! Component: 2400  -  total flux cleaned = 0.0263827 Jy
! Component: 2450  -  total flux cleaned = 0.0265875 Jy
! Component: 2500  -  total flux cleaned = 0.0266391 Jy
! Component: 2550  -  total flux cleaned = 0.0268907 Jy
! Component: 2600  -  total flux cleaned = 0.0270904 Jy
! Component: 2650  -  total flux cleaned = 0.0269917 Jy
! Component: 2700  -  total flux cleaned = 0.0272862 Jy
! Component: 2750  -  total flux cleaned = 0.0273839 Jy
! Component: 2800  -  total flux cleaned = 0.0274806 Jy
! Component: 2850  -  total flux cleaned = 0.0274326 Jy
! Component: 2900  -  total flux cleaned = 0.0272432 Jy
! Component: 2950  -  total flux cleaned = 0.0272436 Jy
! Component: 3000  -  total flux cleaned = 0.0272904 Jy
! Component: 3050  -  total flux cleaned = 0.0273366 Jy
! Component: 3100  -  total flux cleaned = 0.0273366 Jy
! Component: 3150  -  total flux cleaned = 0.0273365 Jy
! Component: 3200  -  total flux cleaned = 0.0273367 Jy
! Component: 3250  -  total flux cleaned = 0.0273818 Jy
! Component: 3300  -  total flux cleaned = 0.0274261 Jy
! Component: 3350  -  total flux cleaned = 0.0274701 Jy
! Component: 3400  -  total flux cleaned = 0.0275138 Jy
! Component: 3450  -  total flux cleaned = 0.0274705 Jy
! Component: 3500  -  total flux cleaned = 0.0275134 Jy
! Component: 3550  -  total flux cleaned = 0.027556 Jy
! Component: 3600  -  total flux cleaned = 0.0274292 Jy
! Component: 3650  -  total flux cleaned = 0.0273029 Jy
! Component: 3700  -  total flux cleaned = 0.0271777 Jy
! Component: 3750  -  total flux cleaned = 0.0270121 Jy
! Component: 3800  -  total flux cleaned = 0.0270535 Jy
! Component: 3850  -  total flux cleaned = 0.0269309 Jy
! Component: 3900  -  total flux cleaned = 0.026769 Jy
! Component: 3950  -  total flux cleaned = 0.02689 Jy
! Component: 4000  -  total flux cleaned = 0.0268897 Jy
! Component: 4050  -  total flux cleaned = 0.0266512 Jy
! Total flux subtracted in 4096 components = 0.0265723 Jy
! Clean residual min=-0.002146 max=0.002339 Jy/beam
! Clean residual mean=-0.000048 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 1.60304 Jy
keep
! Adding 219 model components to the UV plane model.
! The established model now contains 307 components and 1.60304 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J0406-3826_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.356 x 13.83 at -9.489 degrees (North through East)
! Clean map  min=-0.0093857  max=1.4127 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J0406-3826_S_map.fits
wmodel /scr/pima/rdv91_uvs/J0406-3826_S_map.mod
! Writing 307 model components to file: /scr/pima/rdv91_uvs/J0406-3826_S_map.mod
wobs   /scr/pima/rdv91_uvs/J0406-3826_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J0406-3826_S_uvs.fits
wwins  /scr/pima/rdv91_uvs/J0406-3826_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rdv91_uvs/J0406-3826_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.41273 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000710757 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.150933 0.150933 0.301866 0.603733 1.20747 2.41493 4.82986 9.65972 19.3194 38.6389 77.2778
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.412 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1987.63 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J0406-3826_S_dfm.log closed on Fri Jun 15 11:24:17 2018