! Started logfile: /scr/pima/rdv91_uvs/J0106-4034_S_dfm.log on Fri Jun 15 11:23:12 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23299
obs     /scr/pima/rdv91_uvs/J0106-4034_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J0106-4034_S_uva.fits
! AN table 1: 148 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.379692 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0106-4034
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 8092 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0106-4034_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 888 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 888 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 888 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 888 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.263297Jy  sigma=14.580549
! Fit after  self-cal, rms=0.296320Jy  sigma=3.254534
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.753 mas, bmaj=8.181 mas, bpa=0.5687 degrees
! Estimated noise=1.66786 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.595219 Jy
! Component: 100  -  total flux cleaned = 0.72502 Jy
! Total flux subtracted in 100 components = 0.72502 Jy
! Clean residual min=-0.026714 max=0.060233 Jy/beam
! Clean residual mean=0.000026 rms=0.006223 Jy/beam
! Combined flux in latest and established models = 0.72502 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.72502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174237Jy  sigma=1.927839
! Fit after  self-cal, rms=0.174232Jy  sigma=1.927827
! Inverting map 
! Added new window around map position (-6.5, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0505726 Jy
! Component: 100  -  total flux cleaned = 0.0575444 Jy
! Total flux subtracted in 100 components = 0.0575444 Jy
! Clean residual min=-0.017937 max=0.041615 Jy/beam
! Clean residual mean=0.000013 rms=0.004470 Jy/beam
! Combined flux in latest and established models = 0.782564 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.782564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162145Jy  sigma=1.784859
! Fit after  self-cal, rms=0.161190Jy  sigma=1.769015
! Inverting map 
! Added new window around map position (6.5, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285822 Jy
! Component: 100  -  total flux cleaned = 0.0433609 Jy
! Total flux subtracted in 100 components = 0.0433609 Jy
! Clean residual min=-0.015500 max=0.013684 Jy/beam
! Clean residual mean=0.000008 rms=0.003600 Jy/beam
! Combined flux in latest and established models = 0.825925 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.825925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156507Jy  sigma=1.718381
! Fit after  self-cal, rms=0.156295Jy  sigma=1.716049
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.224 mas, bmaj=12.1 mas, bpa=-6.929 degrees
! Estimated noise=0.93429 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573196 Jy
! Component: 100  -  total flux cleaned = 0.00570021 Jy
! Component: 150  -  total flux cleaned = 0.00589099 Jy
! Component: 200  -  total flux cleaned = 0.00624332 Jy
! Total flux subtracted in 200 components = 0.00624332 Jy
! Clean residual min=-0.015137 max=0.011892 Jy/beam
! Clean residual mean=0.000025 rms=0.003523 Jy/beam
! Combined flux in latest and established models = 0.832168 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.832168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155533Jy  sigma=1.708643
! Fit after  self-cal, rms=0.155455Jy  sigma=1.707927
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.224 x 12.1 at -6.929 degrees (North through East)
! Clean map  min=-0.014729  max=0.73016 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     FT        1.00*    KP        1.01     LA        0.99     
!   MK        1.04     NL        1.05     OV        0.96     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     FT        1.00*    KP        1.00     LA        1.02     
!   MK        1.02     NL        1.06     OV        0.97     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     FT        1.00*    KP        1.00     LA        1.02     
!   MK        1.02     NL        1.06     OV        0.96     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     FT        1.00*    KP        0.99     LA        1.01     
!   MK        1.00     NL        1.04     OV        0.93     PT        1.00     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.155455Jy  sigma=1.707927
! Fit after  self-cal, rms=0.154942Jy  sigma=1.683024
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.193 mas, bmaj=12.01 mas, bpa=-6.591 degrees
! Estimated noise=0.945012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00457568 Jy
! Component: 100  -  total flux cleaned = -0.00550931 Jy
! Component: 150  -  total flux cleaned = -0.00614305 Jy
! Component: 200  -  total flux cleaned = -0.00657871 Jy
! Total flux subtracted in 200 components = -0.00657871 Jy
! Clean residual min=-0.010631 max=0.008432 Jy/beam
! Clean residual mean=-0.000061 rms=0.002704 Jy/beam
! Combined flux in latest and established models = 0.825589 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.825589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154680Jy  sigma=1.679831
! Fit after  self-cal, rms=0.154687Jy  sigma=1.679545
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154687Jy  sigma=1.679545
! Fit after  self-cal, rms=0.154669Jy  sigma=1.671584
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.196 mas, bmaj=12.01 mas, bpa=-6.525 degrees
! Estimated noise=0.946088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00365067 Jy
! Component: 100  -  total flux cleaned = -0.00429336 Jy
! Component: 150  -  total flux cleaned = -0.0047969 Jy
! Component: 200  -  total flux cleaned = -0.00500557 Jy
! Total flux subtracted in 200 components = -0.00500557 Jy
! Clean residual min=-0.009281 max=0.007340 Jy/beam
! Clean residual mean=-0.000022 rms=0.002440 Jy/beam
! Combined flux in latest and established models = 0.820584 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.820584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154521Jy  sigma=1.669662
! Fit after  self-cal, rms=0.154515Jy  sigma=1.669582
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.55056e-05 Jy
! Component: 100  -  total flux cleaned = -2.67232e-05 Jy
! Component: 150  -  total flux cleaned = -2.57311e-05 Jy
! Component: 200  -  total flux cleaned = -7.61418e-05 Jy
! Total flux subtracted in 200 components = -7.61418e-05 Jy
! Clean residual min=-0.009362 max=0.007350 Jy/beam
! Clean residual mean=-0.000022 rms=0.002432 Jy/beam
! Combined flux in latest and established models = 0.820508 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.820508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154477Jy  sigma=1.669128
! Fit after  self-cal, rms=0.154470Jy  sigma=1.669104
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154470Jy  sigma=1.669104
! Fit after  self-cal, rms=0.152211Jy  sigma=1.636806
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.191 mas, bmaj=12.02 mas, bpa=-6.519 degrees
! Estimated noise=0.946924 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00444193 Jy
! Component: 100  -  total flux cleaned = -0.00493622 Jy
! Component: 150  -  total flux cleaned = -0.00530446 Jy
! Component: 200  -  total flux cleaned = -0.0055314 Jy
! Total flux subtracted in 200 components = -0.0055314 Jy
! Clean residual min=-0.006963 max=0.005999 Jy/beam
! Clean residual mean=0.000060 rms=0.001687 Jy/beam
! Combined flux in latest and established models = 0.814976 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 74 components and 0.814976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152076Jy  sigma=1.635060
! Fit after  self-cal, rms=0.152082Jy  sigma=1.634967
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.8197e-06 Jy
! Component: 100  -  total flux cleaned = -0.000127619 Jy
! Component: 150  -  total flux cleaned = -0.000248267 Jy
! Component: 200  -  total flux cleaned = -0.000325276 Jy
! Total flux subtracted in 200 components = -0.000325276 Jy
! Clean residual min=-0.006817 max=0.005923 Jy/beam
! Clean residual mean=0.000059 rms=0.001682 Jy/beam
! Combined flux in latest and established models = 0.814651 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 81 components and 0.814651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152062Jy  sigma=1.634698
! Fit after  self-cal, rms=0.152056Jy  sigma=1.634688
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152056Jy  sigma=1.634688
! Fit after  self-cal, rms=0.152548Jy  sigma=1.633862
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.505 mas, bmaj=38.14 mas, bpa=-8.169 degrees
! Estimated noise=1.05169 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00354457 Jy
! Component: 100  -  total flux cleaned = -0.00529963 Jy
! Component: 150  -  total flux cleaned = -0.00551152 Jy
! Component: 200  -  total flux cleaned = -0.00567322 Jy
! Total flux subtracted in 200 components = -0.00567322 Jy
! Clean residual min=-0.006092 max=0.005037 Jy/beam
! Clean residual mean=0.000082 rms=0.001776 Jy/beam
! Combined flux in latest and established models = 0.808978 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 84 components and 0.808978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152527Jy  sigma=1.633193
! Fit after  self-cal, rms=0.152535Jy  sigma=1.633174
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287801 Jy
! Component: 100  -  total flux cleaned = -0.000349597 Jy
! Component: 150  -  total flux cleaned = -0.000400376 Jy
! Component: 200  -  total flux cleaned = -0.000429622 Jy
! Total flux subtracted in 200 components = -0.000429622 Jy
! Clean residual min=-0.006167 max=0.005095 Jy/beam
! Clean residual mean=0.000080 rms=0.001778 Jy/beam
! Combined flux in latest and established models = 0.808548 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 88 components and 0.808548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152537Jy  sigma=1.633137
! Fit after  self-cal, rms=0.152537Jy  sigma=1.633137
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.193 mas, bmaj=12.03 mas, bpa=-6.463 degrees
! Estimated noise=0.947898 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.193 x 12.03 at -6.463 degrees (North through East)
! Clean map  min=-0.0063771  max=0.73635 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152537Jy  sigma=1.633137
! Fit after  self-cal, rms=0.139863Jy  sigma=1.450822
! Inverting map and beam 
! Estimated beam: bmin=4.191 mas, bmaj=12.02 mas, bpa=-6.474 degrees
! Estimated noise=0.948161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00263913 Jy
! Component: 100  -  total flux cleaned = -0.00284561 Jy
! Component: 150  -  total flux cleaned = -0.00296073 Jy
! Component: 200  -  total flux cleaned = -0.00301086 Jy
! Total flux subtracted in 200 components = -0.00301086 Jy
! Clean residual min=-0.005990 max=0.005366 Jy/beam
! Clean residual mean=0.000055 rms=0.001546 Jy/beam
! Combined flux in latest and established models = 0.805537 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 102 components and 0.805537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139792Jy  sigma=1.450031
! Fit after  self-cal, rms=0.139783Jy  sigma=1.450019
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.35769e-05 Jy
! Component: 100  -  total flux cleaned = 3.96366e-05 Jy
! Component: 150  -  total flux cleaned = 8.30435e-05 Jy
! Component: 200  -  total flux cleaned = 0.000122505 Jy
! Total flux subtracted in 200 components = 0.000122505 Jy
! Clean residual min=-0.006041 max=0.005369 Jy/beam
! Clean residual mean=0.000056 rms=0.001543 Jy/beam
! Combined flux in latest and established models = 0.80566 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 107 components and 0.80566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139750Jy  sigma=1.449806
! Fit after  self-cal, rms=0.139749Jy  sigma=1.449801
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139749Jy  sigma=1.449801
! Fit after  self-cal, rms=0.140019Jy  sigma=1.449501
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.736 mas, bmaj=8.214 mas, bpa=0.877 degrees
! Estimated noise=1.68181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.599663 Jy
! Component: 100  -  total flux cleaned = 0.73121 Jy
! Component: 150  -  total flux cleaned = 0.772428 Jy
! Component: 200  -  total flux cleaned = 0.793147 Jy
! Total flux subtracted in 200 components = 0.793147 Jy
! Clean residual min=-0.011933 max=0.011670 Jy/beam
! Clean residual mean=0.000016 rms=0.002763 Jy/beam
! Combined flux in latest and established models = 0.793147 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.793147 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.191 mas, bmaj=12.02 mas, bpa=-6.446 degrees
! Estimated noise=0.948518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.5, 22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110646 Jy
! Component: 100  -  total flux cleaned = 0.0130084 Jy
! Component: 150  -  total flux cleaned = 0.0130147 Jy
! Component: 200  -  total flux cleaned = 0.0130148 Jy
! Total flux subtracted in 200 components = 0.0130148 Jy
! Clean residual min=-0.006559 max=0.006147 Jy/beam
! Clean residual mean=0.000063 rms=0.001647 Jy/beam
! Combined flux in latest and established models = 0.806162 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.806162 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.537 mas, bmaj=38.22 mas, bpa=-8.172 degrees
! Estimated noise=1.05165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000829924 Jy
! Component: 100  -  total flux cleaned = -0.0010148 Jy
! Component: 150  -  total flux cleaned = -0.00116818 Jy
! Component: 200  -  total flux cleaned = -0.00137862 Jy
! Total flux subtracted in 200 components = -0.00137862 Jy
! Clean residual min=-0.005493 max=0.005204 Jy/beam
! Clean residual mean=0.000089 rms=0.001730 Jy/beam
! Combined flux in latest and established models = 0.804783 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000127673 Jy
! Component: 100  -  total flux cleaned = -0.000308877 Jy
! Component: 150  -  total flux cleaned = -0.000420284 Jy
! Component: 200  -  total flux cleaned = -0.00047526 Jy
! Total flux subtracted in 200 components = -0.00047526 Jy
! Clean residual min=-0.005460 max=0.005057 Jy/beam
! Clean residual mean=0.000088 rms=0.001715 Jy/beam
! Combined flux in latest and established models = 0.804308 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 48 components and 0.804308 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.191 mas, bmaj=12.02 mas, bpa=-6.446 degrees
! Estimated noise=0.948518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.72102e-05 Jy
! Component: 100  -  total flux cleaned = 3.6217e-05 Jy
! Component: 150  -  total flux cleaned = -7.8636e-05 Jy
! Component: 200  -  total flux cleaned = -0.000290872 Jy
! Total flux subtracted in 200 components = -0.000290872 Jy
! Clean residual min=-0.006254 max=0.005663 Jy/beam
! Clean residual mean=0.000060 rms=0.001569 Jy/beam
! Combined flux in latest and established models = 0.804017 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 62 components and 0.804017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140284Jy  sigma=1.451495
! Fit after  self-cal, rms=0.140216Jy  sigma=1.451049
wmodel J0106-4034_S_map.mod
! Writing 62 model components to file: J0106-4034_S_map.mod
wobs   J0106-4034_S_uvs.fits
! Writing UV FITS file: J0106-4034_S_uvs.fits
wwins  J0106-4034_S_map.win
! wwins: Wrote 4 windows to J0106-4034_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155887 Jy
! Component: 100  -  total flux cleaned = 0.000446976 Jy
! Component: 150  -  total flux cleaned = 0.00101149 Jy
! Component: 200  -  total flux cleaned = 0.00154676 Jy
! Component: 250  -  total flux cleaned = 0.00240033 Jy
! Component: 300  -  total flux cleaned = 0.00297581 Jy
! Component: 350  -  total flux cleaned = 0.00361192 Jy
! Component: 400  -  total flux cleaned = 0.00415031 Jy
! Component: 450  -  total flux cleaned = 0.00475046 Jy
! Component: 500  -  total flux cleaned = 0.00518664 Jy
! Component: 550  -  total flux cleaned = 0.00525709 Jy
! Component: 600  -  total flux cleaned = 0.00525749 Jy
! Component: 650  -  total flux cleaned = 0.0053265 Jy
! Component: 700  -  total flux cleaned = 0.00526004 Jy
! Component: 750  -  total flux cleaned = 0.00512804 Jy
! Component: 800  -  total flux cleaned = 0.00506262 Jy
! Component: 850  -  total flux cleaned = 0.00474312 Jy
! Component: 900  -  total flux cleaned = 0.00468203 Jy
! Component: 950  -  total flux cleaned = 0.00468294 Jy
! Component: 1000  -  total flux cleaned = 0.00456268 Jy
! Component: 1050  -  total flux cleaned = 0.00432506 Jy
! Component: 1100  -  total flux cleaned = 0.00438396 Jy
! Component: 1150  -  total flux cleaned = 0.00438513 Jy
! Component: 1200  -  total flux cleaned = 0.00444185 Jy
! Component: 1250  -  total flux cleaned = 0.00427229 Jy
! Component: 1300  -  total flux cleaned = 0.00427285 Jy
! Component: 1350  -  total flux cleaned = 0.00432813 Jy
! Component: 1400  -  total flux cleaned = 0.00443669 Jy
! Component: 1450  -  total flux cleaned = 0.00449071 Jy
! Component: 1500  -  total flux cleaned = 0.00427817 Jy
! Component: 1550  -  total flux cleaned = 0.00438261 Jy
! Component: 1600  -  total flux cleaned = 0.00438173 Jy
! Component: 1650  -  total flux cleaned = 0.00417633 Jy
! Component: 1700  -  total flux cleaned = 0.00412559 Jy
! Component: 1750  -  total flux cleaned = 0.00412513 Jy
! Component: 1800  -  total flux cleaned = 0.00412548 Jy
! Component: 1850  -  total flux cleaned = 0.00412592 Jy
! Component: 1900  -  total flux cleaned = 0.00398039 Jy
! Component: 1950  -  total flux cleaned = 0.00417352 Jy
! Component: 2000  -  total flux cleaned = 0.00393496 Jy
! Component: 2050  -  total flux cleaned = 0.0040294 Jy
! Component: 2100  -  total flux cleaned = 0.00402904 Jy
! Component: 2150  -  total flux cleaned = 0.00384343 Jy
! Component: 2200  -  total flux cleaned = 0.00379775 Jy
! Component: 2250  -  total flux cleaned = 0.00388901 Jy
! Component: 2300  -  total flux cleaned = 0.0040245 Jy
! Component: 2350  -  total flux cleaned = 0.00389011 Jy
! Component: 2400  -  total flux cleaned = 0.00411122 Jy
! Component: 2450  -  total flux cleaned = 0.00411208 Jy
! Component: 2500  -  total flux cleaned = 0.00428664 Jy
! Component: 2550  -  total flux cleaned = 0.00450227 Jy
! Component: 2600  -  total flux cleaned = 0.00458677 Jy
! Component: 2650  -  total flux cleaned = 0.00484063 Jy
! Component: 2700  -  total flux cleaned = 0.00471425 Jy
! Component: 2750  -  total flux cleaned = 0.00479777 Jy
! Component: 2800  -  total flux cleaned = 0.00492238 Jy
! Component: 2850  -  total flux cleaned = 0.00496333 Jy
! Component: 2900  -  total flux cleaned = 0.00508546 Jy
! Component: 2950  -  total flux cleaned = 0.00528627 Jy
! Component: 3000  -  total flux cleaned = 0.00532603 Jy
! Component: 3050  -  total flux cleaned = 0.00532545 Jy
! Component: 3100  -  total flux cleaned = 0.00536466 Jy
! Component: 3150  -  total flux cleaned = 0.00544262 Jy
! Component: 3200  -  total flux cleaned = 0.0054425 Jy
! Component: 3250  -  total flux cleaned = 0.00544213 Jy
! Component: 3300  -  total flux cleaned = 0.00555566 Jy
! Component: 3350  -  total flux cleaned = 0.0054795 Jy
! Component: 3400  -  total flux cleaned = 0.00547979 Jy
! Component: 3450  -  total flux cleaned = 0.00548019 Jy
! Component: 3500  -  total flux cleaned = 0.00555391 Jy
! Component: 3550  -  total flux cleaned = 0.00555388 Jy
! Component: 3600  -  total flux cleaned = 0.00562667 Jy
! Component: 3650  -  total flux cleaned = 0.0056268 Jy
! Component: 3700  -  total flux cleaned = 0.00566277 Jy
! Component: 3750  -  total flux cleaned = 0.00580557 Jy
! Component: 3800  -  total flux cleaned = 0.00591173 Jy
! Component: 3850  -  total flux cleaned = 0.00591173 Jy
! Component: 3900  -  total flux cleaned = 0.0059469 Jy
! Component: 3950  -  total flux cleaned = 0.00605154 Jy
! Component: 4000  -  total flux cleaned = 0.00625829 Jy
! Component: 4050  -  total flux cleaned = 0.00636108 Jy
! Total flux subtracted in 4096 components = 0.0064629 Jy
! Clean residual min=-0.002250 max=0.002172 Jy/beam
! Clean residual mean=0.000008 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.81048 Jy
keep
! Adding 221 model components to the UV plane model.
! The established model now contains 283 components and 0.81048 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J0106-4034_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.191 x 12.02 at -6.446 degrees (North through East)
! Clean map  min=-0.0041135  max=0.7424 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J0106-4034_S_map.fits
wmodel /scr/pima/rdv91_uvs/J0106-4034_S_map.mod
! Writing 283 model components to file: /scr/pima/rdv91_uvs/J0106-4034_S_map.mod
wobs   /scr/pima/rdv91_uvs/J0106-4034_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J0106-4034_S_uvs.fits
wwins  /scr/pima/rdv91_uvs/J0106-4034_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rdv91_uvs/J0106-4034_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.742396 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000655096 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.264722 0.264722 0.529445 1.05889 2.11778 4.23556 8.47111 16.9422 33.8845 67.7689
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0019 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.742 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1133.26 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J0106-4034_S_dfm.log closed on Fri Jun 15 11:23:17 2018