! Started logfile: /scr/pima/rdv91_uvs/J0049+0237_X_dfm.log on Fri Jun 15 11:22:46 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.40599
obs     /scr/pima/rdv91_uvs/J0049+0237_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv91_uvs/J0049+0237_X_uva.fits
! AN table 1: 69 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.635105 visibilities/baseline/integration-bin.
! Found source: J0049+0237
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 74 lines of history.
! 
! Reading 7888 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0049+0237_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 211 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008589Jy  sigma=19.176277
! Fit after  self-cal, rms=0.833029Jy  sigma=15.794520
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7105 mas, bmaj=1.792 mas, bpa=-1.365 degrees
! Estimated noise=0.634005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130065 Jy
! Component: 100  -  total flux cleaned = 0.161341 Jy
! Total flux subtracted in 100 components = 0.161341 Jy
! Clean residual min=-0.008939 max=0.020570 Jy/beam
! Clean residual mean=-0.000002 rms=0.002635 Jy/beam
! Combined flux in latest and established models = 0.161341 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.161341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107501Jy  sigma=1.925664
! Fit after  self-cal, rms=0.107505Jy  sigma=1.925451
! Inverting map 
! Added new window around map position (1, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197037 Jy
! Component: 100  -  total flux cleaned = 0.0313245 Jy
! Total flux subtracted in 100 components = 0.0313245 Jy
! Clean residual min=-0.006368 max=0.007684 Jy/beam
! Clean residual mean=-0.000001 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 0.192665 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.192665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103511Jy  sigma=1.842942
! Fit after  self-cal, rms=0.103346Jy  sigma=1.839585
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8018 mas, bmaj=1.969 mas, bpa=-3.345 degrees
! Estimated noise=0.441471 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00955897 Jy
! Component: 100  -  total flux cleaned = 0.0143157 Jy
! Component: 150  -  total flux cleaned = 0.0169819 Jy
! Component: 200  -  total flux cleaned = 0.0178203 Jy
! Total flux subtracted in 200 components = 0.0178203 Jy
! Clean residual min=-0.004425 max=0.004023 Jy/beam
! Clean residual mean=0.000000 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.210485 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.210485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102515Jy  sigma=1.822817
! Fit after  self-cal, rms=0.102476Jy  sigma=1.822048
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8018 x 1.969 at -3.345 degrees (North through East)
! Clean map  min=-0.0039606  max=0.16878 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.05     KP        1.02     
!   LA        1.00     MK        1.00     NL        0.95     OV        1.06     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 2.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.04     KP        1.02     
!   LA        1.01     MK        0.98     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.02     NL        0.98     OV        1.02     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.98     KP        1.01     
!   LA        1.02     MK        0.97     NL        0.99     OV        1.01     
!   PT        0.95     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.102476Jy  sigma=1.822048
! Fit after  self-cal, rms=0.101241Jy  sigma=1.819721
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7978 mas, bmaj=1.983 mas, bpa=-3.541 degrees
! Estimated noise=0.441738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000394022 Jy
! Component: 100  -  total flux cleaned = 0.000301184 Jy
! Component: 150  -  total flux cleaned = 0.00022594 Jy
! Component: 200  -  total flux cleaned = 8.24394e-05 Jy
! Total flux subtracted in 200 components = 8.24394e-05 Jy
! Clean residual min=-0.003493 max=0.003609 Jy/beam
! Clean residual mean=0.000000 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.210568 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 29 components and 0.210568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101204Jy  sigma=1.818987
! Fit after  self-cal, rms=0.101206Jy  sigma=1.818836
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101206Jy  sigma=1.818836
! Fit after  self-cal, rms=0.101137Jy  sigma=1.818817
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7979 mas, bmaj=1.982 mas, bpa=-3.481 degrees
! Estimated noise=0.441472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86436e-05 Jy
! Component: 100  -  total flux cleaned = -4.65429e-05 Jy
! Component: 150  -  total flux cleaned = -9.09896e-05 Jy
! Component: 200  -  total flux cleaned = -0.000130654 Jy
! Total flux subtracted in 200 components = -0.000130654 Jy
! Clean residual min=-0.003523 max=0.003543 Jy/beam
! Clean residual mean=0.000000 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.210437 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 39 components and 0.210437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101124Jy  sigma=1.818561
! Fit after  self-cal, rms=0.101118Jy  sigma=1.818513
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.67837e-05 Jy
! Component: 100  -  total flux cleaned = -1.55069e-05 Jy
! Component: 150  -  total flux cleaned = -3.30482e-05 Jy
! Component: 200  -  total flux cleaned = -3.3212e-05 Jy
! Total flux subtracted in 200 components = -3.3212e-05 Jy
! Clean residual min=-0.003549 max=0.003503 Jy/beam
! Clean residual mean=0.000000 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.210404 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.210404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101110Jy  sigma=1.818355
! Fit after  self-cal, rms=0.101105Jy  sigma=1.818320
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101105Jy  sigma=1.818320
! Fit after  self-cal, rms=0.101070Jy  sigma=1.818316
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7979 mas, bmaj=1.981 mas, bpa=-3.455 degrees
! Estimated noise=0.44134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.2276e-05 Jy
! Component: 100  -  total flux cleaned = -3.3044e-05 Jy
! Component: 150  -  total flux cleaned = -6.40999e-05 Jy
! Component: 200  -  total flux cleaned = -7.86278e-05 Jy
! Total flux subtracted in 200 components = -7.86278e-05 Jy
! Clean residual min=-0.003556 max=0.003455 Jy/beam
! Clean residual mean=0.000000 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.210325 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 48 components and 0.210325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101064Jy  sigma=1.818190
! Fit after  self-cal, rms=0.101061Jy  sigma=1.818162
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.59561e-05 Jy
! Component: 100  -  total flux cleaned = -6.80533e-05 Jy
! Component: 150  -  total flux cleaned = -9.55729e-05 Jy
! Component: 200  -  total flux cleaned = -0.000108024 Jy
! Total flux subtracted in 200 components = -0.000108024 Jy
! Clean residual min=-0.003569 max=0.003425 Jy/beam
! Clean residual mean=0.000000 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.210217 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 52 components and 0.210217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101056Jy  sigma=1.818070
! Fit after  self-cal, rms=0.101054Jy  sigma=1.818051
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101054Jy  sigma=1.818051
! Fit after  self-cal, rms=0.101016Jy  sigma=1.818046
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.311 mas, bpa=3.371 degrees
! Estimated noise=0.566319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.39495e-05 Jy
! Component: 100  -  total flux cleaned = 6.73819e-05 Jy
! Component: 150  -  total flux cleaned = 0.000142533 Jy
! Component: 200  -  total flux cleaned = 0.000192598 Jy
! Total flux subtracted in 200 components = 0.000192598 Jy
! Clean residual min=-0.004989 max=0.004645 Jy/beam
! Clean residual mean=0.000000 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.21041 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 59 components and 0.21041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101019Jy  sigma=1.818072
! Fit after  self-cal, rms=0.101014Jy  sigma=1.818040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000136424 Jy
! Component: 100  -  total flux cleaned = -7.1469e-05 Jy
! Component: 150  -  total flux cleaned = -3.65409e-05 Jy
! Component: 200  -  total flux cleaned = -7.44125e-06 Jy
! Total flux subtracted in 200 components = -7.44125e-06 Jy
! Clean residual min=-0.004984 max=0.004643 Jy/beam
! Clean residual mean=0.000000 rms=0.001361 Jy/beam
! Combined flux in latest and established models = 0.210402 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 62 components and 0.210402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101015Jy  sigma=1.818078
! Fit after  self-cal, rms=0.101013Jy  sigma=1.818067
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7978 mas, bmaj=1.981 mas, bpa=-3.429 degrees
! Estimated noise=0.441276 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7978 x 1.981 at -3.429 degrees (North through East)
! Clean map  min=-0.0032588  max=0.16795 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7112 mas, bmaj=1.79 mas, bpa=-1.142 degrees
! Estimated noise=0.630138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128439 Jy
! Component: 100  -  total flux cleaned = 0.162649 Jy
! Component: 150  -  total flux cleaned = 0.180775 Jy
! Component: 200  -  total flux cleaned = 0.192036 Jy
! Total flux subtracted in 200 components = 0.192036 Jy
! Clean residual min=-0.005478 max=0.006231 Jy/beam
! Clean residual mean=-0.000001 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 0.192036 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.192036 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7978 mas, bmaj=1.981 mas, bpa=-3.429 degrees
! Estimated noise=0.441276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00895367 Jy
! Component: 100  -  total flux cleaned = 0.0135115 Jy
! Component: 150  -  total flux cleaned = 0.0161267 Jy
! Component: 200  -  total flux cleaned = 0.0172766 Jy
! Total flux subtracted in 200 components = 0.0172766 Jy
! Clean residual min=-0.003551 max=0.003538 Jy/beam
! Clean residual mean=0.000000 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.209313 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 31 components and 0.209313 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.059 mas, bmaj=3.311 mas, bpa=3.371 degrees
! Estimated noise=0.566319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100082 Jy
! Component: 100  -  total flux cleaned = 0.00119124 Jy
! Component: 150  -  total flux cleaned = 0.00129333 Jy
! Component: 200  -  total flux cleaned = 0.00129314 Jy
! Total flux subtracted in 200 components = 0.00129314 Jy
! Clean residual min=-0.004959 max=0.004788 Jy/beam
! Clean residual mean=0.000000 rms=0.001372 Jy/beam
! Combined flux in latest and established models = 0.210606 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0338e-05 Jy
! Component: 100  -  total flux cleaned = -2.08363e-05 Jy
! Component: 150  -  total flux cleaned = -3.72833e-05 Jy
! Component: 200  -  total flux cleaned = -3.76697e-05 Jy
! Total flux subtracted in 200 components = -3.76697e-05 Jy
! Clean residual min=-0.004955 max=0.004714 Jy/beam
! Clean residual mean=0.000000 rms=0.001367 Jy/beam
! Combined flux in latest and established models = 0.210568 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 47 components and 0.210568 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7978 mas, bmaj=1.981 mas, bpa=-3.429 degrees
! Estimated noise=0.441276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000443445 Jy
! Component: 100  -  total flux cleaned = -0.000388232 Jy
! Component: 150  -  total flux cleaned = -0.00038741 Jy
! Component: 200  -  total flux cleaned = -0.000365028 Jy
! Total flux subtracted in 200 components = -0.000365028 Jy
! Clean residual min=-0.003554 max=0.003533 Jy/beam
! Clean residual mean=0.000000 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.210203 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.210203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101030Jy  sigma=1.818241
! Fit after  self-cal, rms=0.101025Jy  sigma=1.818125
wmodel J0049+0237_X_map.mod
! Writing 57 model components to file: J0049+0237_X_map.mod
wobs   J0049+0237_X_uvs.fits
! Writing UV FITS file: J0049+0237_X_uvs.fits
wwins  J0049+0237_X_map.win
! wwins: Wrote 2 windows to J0049+0237_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.70923e-05 Jy
! Component: 100  -  total flux cleaned = 0.000155346 Jy
! Component: 150  -  total flux cleaned = 0.000262619 Jy
! Component: 200  -  total flux cleaned = 0.000312749 Jy
! Component: 250  -  total flux cleaned = 0.000359867 Jy
! Component: 300  -  total flux cleaned = 0.000405669 Jy
! Component: 350  -  total flux cleaned = 0.000450729 Jy
! Component: 400  -  total flux cleaned = 0.000583411 Jy
! Component: 450  -  total flux cleaned = 0.000794254 Jy
! Component: 500  -  total flux cleaned = 0.000916017 Jy
! Component: 550  -  total flux cleaned = 0.00115516 Jy
! Component: 600  -  total flux cleaned = 0.00138707 Jy
! Component: 650  -  total flux cleaned = 0.00157454 Jy
! Component: 700  -  total flux cleaned = 0.00175711 Jy
! Component: 750  -  total flux cleaned = 0.00193442 Jy
! Component: 800  -  total flux cleaned = 0.00210808 Jy
! Component: 850  -  total flux cleaned = 0.00231112 Jy
! Component: 900  -  total flux cleaned = 0.0024092 Jy
! Component: 950  -  total flux cleaned = 0.00250565 Jy
! Component: 1000  -  total flux cleaned = 0.00263244 Jy
! Component: 1050  -  total flux cleaned = 0.00266466 Jy
! Component: 1100  -  total flux cleaned = 0.0028759 Jy
! Component: 1150  -  total flux cleaned = 0.00293471 Jy
! Component: 1200  -  total flux cleaned = 0.00296309 Jy
! Component: 1250  -  total flux cleaned = 0.00287798 Jy
! Component: 1300  -  total flux cleaned = 0.00293383 Jy
! Component: 1350  -  total flux cleaned = 0.00285148 Jy
! Component: 1400  -  total flux cleaned = 0.00287843 Jy
! Component: 1450  -  total flux cleaned = 0.00285234 Jy
! Component: 1500  -  total flux cleaned = 0.00285294 Jy
! Component: 1550  -  total flux cleaned = 0.00287868 Jy
! Component: 1600  -  total flux cleaned = 0.00282875 Jy
! Component: 1650  -  total flux cleaned = 0.00285395 Jy
! Component: 1700  -  total flux cleaned = 0.00292708 Jy
! Component: 1750  -  total flux cleaned = 0.00283069 Jy
! Component: 1800  -  total flux cleaned = 0.00287798 Jy
! Component: 1850  -  total flux cleaned = 0.00283156 Jy
! Component: 1900  -  total flux cleaned = 0.00285456 Jy
! Component: 1950  -  total flux cleaned = 0.00289989 Jy
! Component: 2000  -  total flux cleaned = 0.00292202 Jy
! Component: 2050  -  total flux cleaned = 0.00292174 Jy
! Component: 2100  -  total flux cleaned = 0.00287899 Jy
! Component: 2150  -  total flux cleaned = 0.00294344 Jy
! Component: 2200  -  total flux cleaned = 0.00288041 Jy
! Component: 2250  -  total flux cleaned = 0.00286029 Jy
! Component: 2300  -  total flux cleaned = 0.00292159 Jy
! Component: 2350  -  total flux cleaned = 0.00286076 Jy
! Component: 2400  -  total flux cleaned = 0.00282102 Jy
! Component: 2450  -  total flux cleaned = 0.00284061 Jy
! Component: 2500  -  total flux cleaned = 0.0027435 Jy
! Component: 2550  -  total flux cleaned = 0.00270542 Jy
! Component: 2600  -  total flux cleaned = 0.00264822 Jy
! Component: 2650  -  total flux cleaned = 0.00257283 Jy
! Component: 2700  -  total flux cleaned = 0.00244343 Jy
! Component: 2750  -  total flux cleaned = 0.00240704 Jy
! Component: 2800  -  total flux cleaned = 0.00237107 Jy
! Component: 2850  -  total flux cleaned = 0.00233516 Jy
! Component: 2900  -  total flux cleaned = 0.00224636 Jy
! Component: 2950  -  total flux cleaned = 0.00224616 Jy
! Component: 3000  -  total flux cleaned = 0.00214168 Jy
! Component: 3050  -  total flux cleaned = 0.00210705 Jy
! Component: 3100  -  total flux cleaned = 0.00202125 Jy
! Component: 3150  -  total flux cleaned = 0.00198706 Jy
! Component: 3200  -  total flux cleaned = 0.00193656 Jy
! Component: 3250  -  total flux cleaned = 0.00188644 Jy
! Component: 3300  -  total flux cleaned = 0.00185335 Jy
! Component: 3350  -  total flux cleaned = 0.00178771 Jy
! Component: 3400  -  total flux cleaned = 0.001804 Jy
! Component: 3450  -  total flux cleaned = 0.00175546 Jy
! Component: 3500  -  total flux cleaned = 0.00170747 Jy
! Component: 3550  -  total flux cleaned = 0.00172361 Jy
! Component: 3600  -  total flux cleaned = 0.00166064 Jy
! Component: 3650  -  total flux cleaned = 0.00161367 Jy
! Component: 3700  -  total flux cleaned = 0.00156705 Jy
! Component: 3750  -  total flux cleaned = 0.00152099 Jy
! Component: 3800  -  total flux cleaned = 0.00147526 Jy
! Component: 3850  -  total flux cleaned = 0.0014601 Jy
! Component: 3900  -  total flux cleaned = 0.00141474 Jy
! Component: 3950  -  total flux cleaned = 0.00136969 Jy
! Component: 4000  -  total flux cleaned = 0.00128018 Jy
! Component: 4050  -  total flux cleaned = 0.00122089 Jy
! Total flux subtracted in 4096 components = 0.00117669 Jy
! Clean residual min=-0.000780 max=0.000874 Jy/beam
! Clean residual mean=-0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.21138 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 327 components and 0.21138 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rdv91_uvs/J0049+0237_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7978 x 1.981 at -3.429 degrees (North through East)
! Clean map  min=-0.0015939  max=0.16766 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J0049+0237_X_map.fits
wmodel /scr/pima/rdv91_uvs/J0049+0237_X_map.mod
! Writing 327 model components to file: /scr/pima/rdv91_uvs/J0049+0237_X_map.mod
wobs   /scr/pima/rdv91_uvs/J0049+0237_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv91_uvs/J0049+0237_X_uvs.fits
wwins  /scr/pima/rdv91_uvs/J0049+0237_X_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv91_uvs/J0049+0237_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.167659 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000236509 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.423197 0.423197 0.846394 1.69279 3.38558 6.77115 13.5423 27.0846 54.1692
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.167 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  708.889 
quit
! Quitting program
! Log file /scr/pima/rdv91_uvs/J0049+0237_X_dfm.log closed on Fri Jun 15 11:22:51 2018