! Started logfile: /scr/pima/rdv91_uvs/J0010-3054_S_dfm.log on Fri Jun 15 11:22:51 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23299 obs /scr/pima/rdv91_uvs/J0010-3054_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv91_uvs/J0010-3054_S_uva.fits ! AN table 1: 179 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.987709 visibilities/baseline/integration-bin. ! Found source: J0010-3054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 74 lines of history. ! ! Reading 31824 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0010-3054_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017920Jy sigma=13.952098 ! Fit after self-cal, rms=0.915602Jy sigma=12.521361 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=6.721 mas, bpa=-8.237 degrees ! Estimated noise=0.722133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0745021 Jy ! Component: 100 - total flux cleaned = 0.0907624 Jy ! Total flux subtracted in 100 components = 0.0907624 Jy ! Clean residual min=-0.005731 max=0.006086 Jy/beam ! Clean residual mean=-0.000003 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.0907624 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0907624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147072Jy sigma=1.854952 ! Fit after self-cal, rms=0.145617Jy sigma=1.835786 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=8.215 mas, bpa=-7.638 degrees ! Estimated noise=0.302083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717942 Jy ! Component: 100 - total flux cleaned = 0.0103909 Jy ! Component: 150 - total flux cleaned = 0.0117944 Jy ! Component: 200 - total flux cleaned = 0.0119448 Jy ! Total flux subtracted in 200 components = 0.0119448 Jy ! Clean residual min=-0.003121 max=0.003161 Jy/beam ! Clean residual mean=-0.000012 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.102707 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 0.102707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145309Jy sigma=1.830706 ! Fit after self-cal, rms=0.145321Jy sigma=1.830232 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.092 x 8.215 at -7.638 degrees (North through East) ! Clean map min=-0.0030366 max=0.096152 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.09 KP 1.02 ! LA 0.92 MK 1.08 NL 1.01 OV 1.04 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.04 KP 1.01 ! LA 0.94 MK 0.92 NL 1.00 OV 1.03 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.12 KP 1.03 ! LA 0.99 MK 1.03 NL 1.03 OV 1.02 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.05 HN 1.08 KP 0.97 ! LA 1.02 MK 0.94 NL 1.01 OV 0.99 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.145321Jy sigma=1.830232 ! Fit after self-cal, rms=0.147701Jy sigma=1.827358 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=8.169 mas, bpa=-7.544 degrees ! Estimated noise=0.302185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734465 Jy ! Component: 100 - total flux cleaned = 0.000796662 Jy ! Component: 150 - total flux cleaned = 0.000823539 Jy ! Component: 200 - total flux cleaned = 0.000850179 Jy ! Total flux subtracted in 200 components = 0.000850179 Jy ! Clean residual min=-0.002738 max=0.002874 Jy/beam ! Clean residual mean=-0.000001 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.103557 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.103557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147683Jy sigma=1.827246 ! Fit after self-cal, rms=0.147850Jy sigma=1.826738 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147850Jy sigma=1.826738 ! Fit after self-cal, rms=0.148344Jy sigma=1.825822 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.145 mas, bpa=-7.537 degrees ! Estimated noise=0.30337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721185 Jy ! Component: 100 - total flux cleaned = 0.000746639 Jy ! Component: 150 - total flux cleaned = 0.000791569 Jy ! Component: 200 - total flux cleaned = 0.000812216 Jy ! Total flux subtracted in 200 components = 0.000812216 Jy ! Clean residual min=-0.002689 max=0.002622 Jy/beam ! Clean residual mean=-0.000001 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.10437 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.10437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148331Jy sigma=1.825744 ! Fit after self-cal, rms=0.148356Jy sigma=1.825677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.94725e-05 Jy ! Component: 100 - total flux cleaned = 3.52174e-05 Jy ! Component: 150 - total flux cleaned = 7.21259e-05 Jy ! Component: 200 - total flux cleaned = 0.000104744 Jy ! Total flux subtracted in 200 components = 0.000104744 Jy ! Clean residual min=-0.002687 max=0.002552 Jy/beam ! Clean residual mean=-0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.104474 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.104474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148348Jy sigma=1.825631 ! Fit after self-cal, rms=0.148350Jy sigma=1.825623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148350Jy sigma=1.825623 ! Fit after self-cal, rms=0.147204Jy sigma=1.823353 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=8.125 mas, bpa=-7.619 degrees ! Estimated noise=0.303022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258244 Jy ! Component: 100 - total flux cleaned = 0.000258634 Jy ! Component: 150 - total flux cleaned = 0.000272351 Jy ! Component: 200 - total flux cleaned = 0.000297673 Jy ! Total flux subtracted in 200 components = 0.000297673 Jy ! Clean residual min=-0.002526 max=0.002149 Jy/beam ! Clean residual mean=-0.000004 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.104772 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.104772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147199Jy sigma=1.823317 ! Fit after self-cal, rms=0.147183Jy sigma=1.823093 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.75483e-05 Jy ! Component: 100 - total flux cleaned = 0.000110481 Jy ! Component: 150 - total flux cleaned = 0.000111406 Jy ! Component: 200 - total flux cleaned = 0.000111417 Jy ! Total flux subtracted in 200 components = 0.000111417 Jy ! Clean residual min=-0.002535 max=0.002119 Jy/beam ! Clean residual mean=-0.000004 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.104883 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.104883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147180Jy sigma=1.823072 ! Fit after self-cal, rms=0.147178Jy sigma=1.823068 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147178Jy sigma=1.823068 ! Fit after self-cal, rms=0.146798Jy sigma=1.823027 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.925 mas, bmaj=21.08 mas, bpa=-1.986 degrees ! Estimated noise=0.371471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637588 Jy ! Component: 100 - total flux cleaned = 0.000636884 Jy ! Component: 150 - total flux cleaned = 0.000618631 Jy ! Component: 200 - total flux cleaned = 0.000618313 Jy ! Total flux subtracted in 200 components = 0.000618313 Jy ! Clean residual min=-0.002628 max=0.002341 Jy/beam ! Clean residual mean=-0.000007 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.105502 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.105502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146797Jy sigma=1.823035 ! Fit after self-cal, rms=0.146788Jy sigma=1.822994 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.41295e-05 Jy ! Component: 100 - total flux cleaned = 3.44702e-05 Jy ! Component: 150 - total flux cleaned = 3.39372e-05 Jy ! Component: 200 - total flux cleaned = 1.9262e-05 Jy ! Total flux subtracted in 200 components = 1.9262e-05 Jy ! Clean residual min=-0.002630 max=0.002341 Jy/beam ! Clean residual mean=-0.000007 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.105521 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.105521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146788Jy sigma=1.823029 ! Fit after self-cal, rms=0.146783Jy sigma=1.822996 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=8.12 mas, bpa=-7.634 degrees ! Estimated noise=0.302685 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 8.12 at -7.634 degrees (North through East) ! Clean map min=-0.0024279 max=0.095825 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.385 mas, bmaj=6.628 mas, bpa=-8.177 degrees ! Estimated noise=0.721186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755818 Jy ! Component: 100 - total flux cleaned = 0.0922338 Jy ! Component: 150 - total flux cleaned = 0.0967285 Jy ! Component: 200 - total flux cleaned = 0.0988856 Jy ! Total flux subtracted in 200 components = 0.0988856 Jy ! Clean residual min=-0.005549 max=0.005312 Jy/beam ! Clean residual mean=0.000000 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.0988856 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0988856 Jy ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=8.12 mas, bpa=-7.634 degrees ! Estimated noise=0.302685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00450461 Jy ! Component: 100 - total flux cleaned = 0.00632674 Jy ! Component: 150 - total flux cleaned = 0.00666715 Jy ! Component: 200 - total flux cleaned = 0.00678721 Jy ! Total flux subtracted in 200 components = 0.00678721 Jy ! Clean residual min=-0.002440 max=0.002212 Jy/beam ! Clean residual mean=-0.000003 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.105673 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 39 components and 0.105673 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.925 mas, bmaj=21.08 mas, bpa=-1.986 degrees ! Estimated noise=0.371471 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053997 Jy ! Component: 100 - total flux cleaned = 0.000522516 Jy ! Component: 150 - total flux cleaned = 0.000523633 Jy ! Component: 200 - total flux cleaned = 0.000523096 Jy ! Total flux subtracted in 200 components = 0.000523096 Jy ! Clean residual min=-0.002559 max=0.002439 Jy/beam ! Clean residual mean=-0.000005 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.106196 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.4572e-05 Jy ! Component: 100 - total flux cleaned = -3.56159e-07 Jy ! Component: 150 - total flux cleaned = -7.77774e-07 Jy ! Component: 200 - total flux cleaned = -1.10948e-06 Jy ! Total flux subtracted in 200 components = -1.10948e-06 Jy ! Clean residual min=-0.002560 max=0.002457 Jy/beam ! Clean residual mean=-0.000005 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.106195 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.106195 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=8.12 mas, bpa=-7.634 degrees ! Estimated noise=0.302685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307213 Jy ! Component: 100 - total flux cleaned = -0.000347467 Jy ! Component: 150 - total flux cleaned = -0.000290959 Jy ! Component: 200 - total flux cleaned = -0.000236407 Jy ! Total flux subtracted in 200 components = -0.000236407 Jy ! Clean residual min=-0.002429 max=0.002153 Jy/beam ! Clean residual mean=-0.000003 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.105958 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.105958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146757Jy sigma=1.822733 ! Fit after self-cal, rms=0.146754Jy sigma=1.822574 wmodel J0010-3054_S_map.mod ! Writing 62 model components to file: J0010-3054_S_map.mod wobs J0010-3054_S_uvs.fits ! Writing UV FITS file: J0010-3054_S_uvs.fits wwins J0010-3054_S_map.win ! wwins: Wrote 2 windows to J0010-3054_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000664456 Jy ! Component: 100 - total flux cleaned = -0.000821997 Jy ! Component: 150 - total flux cleaned = -0.00100913 Jy ! Component: 200 - total flux cleaned = -0.00108191 Jy ! Component: 250 - total flux cleaned = -0.0010475 Jy ! Component: 300 - total flux cleaned = -0.000980201 Jy ! Component: 350 - total flux cleaned = -0.000914249 Jy ! Component: 400 - total flux cleaned = -0.000881488 Jy ! Component: 450 - total flux cleaned = -0.000786707 Jy ! Component: 500 - total flux cleaned = -0.000663502 Jy ! Component: 550 - total flux cleaned = -0.000542685 Jy ! Component: 600 - total flux cleaned = -0.000484021 Jy ! Component: 650 - total flux cleaned = -0.000426098 Jy ! Component: 700 - total flux cleaned = -0.000369068 Jy ! Component: 750 - total flux cleaned = -0.000341288 Jy ! Component: 800 - total flux cleaned = -0.000341814 Jy ! Component: 850 - total flux cleaned = -0.000368566 Jy ! Component: 900 - total flux cleaned = -0.000287491 Jy ! Component: 950 - total flux cleaned = -0.000261016 Jy ! Component: 1000 - total flux cleaned = -0.000156792 Jy ! Component: 1050 - total flux cleaned = -0.000156443 Jy ! Component: 1100 - total flux cleaned = -0.000105384 Jy ! Component: 1150 - total flux cleaned = -0.000130783 Jy ! Component: 1200 - total flux cleaned = -0.000105613 Jy ! Component: 1250 - total flux cleaned = -8.09783e-05 Jy ! Component: 1300 - total flux cleaned = -3.21136e-05 Jy ! Component: 1350 - total flux cleaned = -3.20232e-05 Jy ! Component: 1400 - total flux cleaned = -5.5663e-05 Jy ! Component: 1450 - total flux cleaned = -7.90206e-05 Jy ! Component: 1500 - total flux cleaned = -0.000102224 Jy ! Component: 1550 - total flux cleaned = -0.000124911 Jy ! Component: 1600 - total flux cleaned = -0.000102186 Jy ! Component: 1650 - total flux cleaned = -0.000102537 Jy ! Component: 1700 - total flux cleaned = -0.000169515 Jy ! Component: 1750 - total flux cleaned = -0.000257797 Jy ! Component: 1800 - total flux cleaned = -0.000258093 Jy ! Component: 1850 - total flux cleaned = -0.000322959 Jy ! Component: 1900 - total flux cleaned = -0.000451269 Jy ! Component: 1950 - total flux cleaned = -0.000429662 Jy ! Component: 2000 - total flux cleaned = -0.000429557 Jy ! Component: 2050 - total flux cleaned = -0.000471039 Jy ! Component: 2100 - total flux cleaned = -0.000553396 Jy ! Component: 2150 - total flux cleaned = -0.000492028 Jy ! Component: 2200 - total flux cleaned = -0.000492166 Jy ! Component: 2250 - total flux cleaned = -0.000492079 Jy ! Component: 2300 - total flux cleaned = -0.000512073 Jy ! Component: 2350 - total flux cleaned = -0.000492434 Jy ! Component: 2400 - total flux cleaned = -0.000512054 Jy ! Component: 2450 - total flux cleaned = -0.000570293 Jy ! Component: 2500 - total flux cleaned = -0.000550946 Jy ! Component: 2550 - total flux cleaned = -0.000493492 Jy ! Component: 2600 - total flux cleaned = -0.000493457 Jy ! Component: 2650 - total flux cleaned = -0.000568918 Jy ! Component: 2700 - total flux cleaned = -0.000550236 Jy ! Component: 2750 - total flux cleaned = -0.000587501 Jy ! Component: 2800 - total flux cleaned = -0.000569401 Jy ! Component: 2850 - total flux cleaned = -0.000569371 Jy ! Component: 2900 - total flux cleaned = -0.00051483 Jy ! Component: 2950 - total flux cleaned = -0.00049681 Jy ! Component: 3000 - total flux cleaned = -0.000461063 Jy ! Component: 3050 - total flux cleaned = -0.000407848 Jy ! Component: 3100 - total flux cleaned = -0.000443132 Jy ! Component: 3150 - total flux cleaned = -0.000425541 Jy ! Component: 3200 - total flux cleaned = -0.000338455 Jy ! Component: 3250 - total flux cleaned = -0.000338417 Jy ! Component: 3300 - total flux cleaned = -0.000287151 Jy ! Component: 3350 - total flux cleaned = -0.000236061 Jy ! Component: 3400 - total flux cleaned = -0.000252977 Jy ! Component: 3450 - total flux cleaned = -0.000168459 Jy ! Component: 3500 - total flux cleaned = -0.00018501 Jy ! Component: 3550 - total flux cleaned = -8.52153e-05 Jy ! Component: 3600 - total flux cleaned = -5.23769e-05 Jy ! Component: 3650 - total flux cleaned = -5.24647e-05 Jy ! Component: 3700 - total flux cleaned = -3.61499e-05 Jy ! Component: 3750 - total flux cleaned = -3.71689e-06 Jy ! Component: 3800 - total flux cleaned = 4.4813e-05 Jy ! Component: 3850 - total flux cleaned = 6.08419e-05 Jy ! Component: 3900 - total flux cleaned = 6.07337e-05 Jy ! Component: 3950 - total flux cleaned = 4.4944e-05 Jy ! Component: 4000 - total flux cleaned = 9.25035e-05 Jy ! Component: 4050 - total flux cleaned = 0.000124101 Jy ! Total flux subtracted in 4096 components = 0.000155405 Jy ! Clean residual min=-0.000932 max=0.000827 Jy/beam ! Clean residual mean=-0.000000 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.106114 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 354 components and 0.106114 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rdv91_uvs/J0010-3054_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 8.12 at -7.634 degrees (North through East) ! Clean map min=-0.0018049 max=0.096244 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv91_uvs/J0010-3054_S_map.fits wmodel /scr/pima/rdv91_uvs/J0010-3054_S_map.mod ! Writing 354 model components to file: /scr/pima/rdv91_uvs/J0010-3054_S_map.mod wobs /scr/pima/rdv91_uvs/J0010-3054_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv91_uvs/J0010-3054_S_uvs.fits wwins /scr/pima/rdv91_uvs/J0010-3054_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv91_uvs/J0010-3054_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.096244 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283423 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.883451 0.883451 1.7669 3.53381 7.06761 14.1352 28.2704 56.5409 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.096 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 339.577 quit ! Quitting program ! Log file /scr/pima/rdv91_uvs/J0010-3054_S_dfm.log closed on Fri Jun 15 11:22:56 2018