! Started logfile: J2224+6016_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:56:44 2012 obs J2224+6016_X_2011_08_02_pus_uva.fits ! Reading UV FITS file: J2224+6016_X_2011_08_02_pus_uva.fits ! AN table 1: 180 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.332479 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2224+6016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3146 lines of history. ! ! Reading 18672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2224+6016_X_2011_08_02_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 990 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 957 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 990 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 990 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936896Jy sigma=0.010787 ! Fit after self-cal, rms=0.891174Jy sigma=0.010319 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.863 mas, bmaj=1.345 mas, bpa=-33.91 degrees ! Estimated noise=1037.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697488 Jy ! Component: 100 - total flux cleaned = 0.0974051 Jy ! Total flux subtracted in 100 components = 0.0974051 Jy ! Clean residual min=-0.010133 max=0.016127 Jy/beam ! Clean residual mean=-0.000231 rms=0.003371 Jy/beam ! Combined flux in latest and established models = 0.0974051 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0974051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149618Jy sigma=0.001581 ! Fit after self-cal, rms=0.149412Jy sigma=0.001578 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.327 mas, bmaj=1.819 mas, bpa=-34.01 degrees ! Estimated noise=459.172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416312 Jy ! Component: 100 - total flux cleaned = 0.065559 Jy ! Component: 150 - total flux cleaned = 0.0802069 Jy ! Component: 200 - total flux cleaned = 0.089313 Jy ! Total flux subtracted in 200 components = 0.089313 Jy ! Clean residual min=-0.010131 max=0.017683 Jy/beam ! Clean residual mean=-0.000240 rms=0.003312 Jy/beam ! Combined flux in latest and established models = 0.186718 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.186718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137305Jy sigma=0.001421 ! Fit after self-cal, rms=0.136542Jy sigma=0.001412 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 0.89 FT 1.00* HH 1.00* ! HN 1.02 KP 0.82 LA 0.86 MK 1.28 ! NL 1.22 OV 1.13 PT 0.88 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.91 FT 1.00* HH 1.00* ! HN 0.97 KP 0.82 LA 0.90 MK 1.36 ! NL 1.30 OV 1.12 PT 0.98 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.87 FT 1.00* HH 1.00* ! HN 0.87 KP 0.73 LA 0.87 MK 1.01 ! NL 1.28 OV 1.12 PT 0.91 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.87 FT 1.00* HH 1.00* ! HN 0.77 KP 0.81 LA 0.93 MK 1.03 ! NL 1.26 OV 1.14 PT 0.96 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.136542Jy sigma=0.001412 ! Fit after self-cal, rms=0.133801Jy sigma=0.001365 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.369 mas, bmaj=1.846 mas, bpa=-33.21 degrees ! Estimated noise=467.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643128 Jy ! Component: 100 - total flux cleaned = 0.00781463 Jy ! Component: 150 - total flux cleaned = 0.00804545 Jy ! Component: 200 - total flux cleaned = 0.00793989 Jy ! Total flux subtracted in 200 components = 0.00793989 Jy ! Clean residual min=-0.004944 max=0.005011 Jy/beam ! Clean residual mean=-0.000022 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.194658 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.194658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133394Jy sigma=0.001360 ! Fit after self-cal, rms=0.133734Jy sigma=0.001356 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133734Jy sigma=0.001356 ! Fit after self-cal, rms=0.129455Jy sigma=0.001352 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.39 mas, bmaj=1.754 mas, bpa=-37.33 degrees ! Estimated noise=460.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251099 Jy ! Component: 100 - total flux cleaned = 0.00237047 Jy ! Component: 150 - total flux cleaned = 0.00242501 Jy ! Component: 200 - total flux cleaned = 0.0025852 Jy ! Total flux subtracted in 200 components = 0.0025852 Jy ! Clean residual min=-0.003306 max=0.003836 Jy/beam ! Clean residual mean=-0.000012 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.197243 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.197243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129336Jy sigma=0.001351 ! Fit after self-cal, rms=0.129312Jy sigma=0.001350 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006814 Jy ! Component: 100 - total flux cleaned = 0.000617283 Jy ! Component: 150 - total flux cleaned = 0.000615825 Jy ! Component: 200 - total flux cleaned = 0.000565817 Jy ! Total flux subtracted in 200 components = 0.000565817 Jy ! Clean residual min=-0.003356 max=0.003757 Jy/beam ! Clean residual mean=-0.000009 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.197809 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.197809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129235Jy sigma=0.001350 ! Fit after self-cal, rms=0.129206Jy sigma=0.001349 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129206Jy sigma=0.001349 ! Fit after self-cal, rms=0.126393Jy sigma=0.001349 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.398 mas, bmaj=1.724 mas, bpa=-38.6 degrees ! Estimated noise=454.894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183662 Jy ! Component: 100 - total flux cleaned = 0.00216348 Jy ! Component: 150 - total flux cleaned = 0.00230999 Jy ! Component: 200 - total flux cleaned = 0.00248899 Jy ! Total flux subtracted in 200 components = 0.00248899 Jy ! Clean residual min=-0.003105 max=0.003639 Jy/beam ! Clean residual mean=-0.000011 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.200298 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.200298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126328Jy sigma=0.001348 ! Fit after self-cal, rms=0.126293Jy sigma=0.001348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602151 Jy ! Component: 100 - total flux cleaned = 0.000700204 Jy ! Component: 150 - total flux cleaned = 0.000743486 Jy ! Component: 200 - total flux cleaned = 0.000782732 Jy ! Total flux subtracted in 200 components = 0.000782732 Jy ! Clean residual min=-0.003095 max=0.003765 Jy/beam ! Clean residual mean=-0.000007 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.201081 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.201081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126246Jy sigma=0.001348 ! Fit after self-cal, rms=0.126235Jy sigma=0.001348 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126235Jy sigma=0.001348 ! Fit after self-cal, rms=0.124499Jy sigma=0.001347 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=2.754 mas, bpa=70.84 degrees ! Estimated noise=504.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192508 Jy ! Component: 100 - total flux cleaned = 0.00255844 Jy ! Component: 150 - total flux cleaned = 0.00286677 Jy ! Component: 200 - total flux cleaned = 0.00303514 Jy ! Total flux subtracted in 200 components = 0.00303514 Jy ! Clean residual min=-0.002806 max=0.003997 Jy/beam ! Clean residual mean=-0.000016 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.204116 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.204116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124480Jy sigma=0.001347 ! Fit after self-cal, rms=0.124454Jy sigma=0.001347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032658 Jy ! Component: 100 - total flux cleaned = 0.000419599 Jy ! Component: 150 - total flux cleaned = 0.000503223 Jy ! Component: 200 - total flux cleaned = 0.000582913 Jy ! Total flux subtracted in 200 components = 0.000582913 Jy ! Clean residual min=-0.002776 max=0.003900 Jy/beam ! Clean residual mean=-0.000012 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.204699 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 87 components and 0.204699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124446Jy sigma=0.001347 ! Fit after self-cal, rms=0.124439Jy sigma=0.001347 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.4 mas, bmaj=1.714 mas, bpa=-39.08 degrees ! Estimated noise=451.803 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.4 x 1.714 at -39.08 degrees (North through East) ! Clean map min=-0.0028899 max=0.10122 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.929 mas, bmaj=1.192 mas, bpa=-39.9 degrees ! Estimated noise=1002.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676962 Jy ! Component: 100 - total flux cleaned = 0.102622 Jy ! Component: 150 - total flux cleaned = 0.126504 Jy ! Component: 200 - total flux cleaned = 0.144096 Jy ! Total flux subtracted in 200 components = 0.144096 Jy ! Clean residual min=-0.009159 max=0.010283 Jy/beam ! Clean residual mean=-0.000110 rms=0.002338 Jy/beam ! Combined flux in latest and established models = 0.144096 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.144096 Jy ! Inverting map and beam ! Estimated beam: bmin=1.4 mas, bmaj=1.714 mas, bpa=-39.08 degrees ! Estimated noise=451.803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231681 Jy ! Component: 100 - total flux cleaned = 0.0363963 Jy ! Component: 150 - total flux cleaned = 0.0445031 Jy ! Component: 200 - total flux cleaned = 0.0497695 Jy ! Total flux subtracted in 200 components = 0.0497695 Jy ! Clean residual min=-0.003914 max=0.005439 Jy/beam ! Clean residual mean=-0.000056 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.193866 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 0.193866 Jy ! Inverting map ! Added new window around map position (0.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00484438 Jy ! Component: 100 - total flux cleaned = 0.00746627 Jy ! Component: 150 - total flux cleaned = 0.00832266 Jy ! Component: 200 - total flux cleaned = 0.00873643 Jy ! Total flux subtracted in 200 components = 0.00873643 Jy ! Clean residual min=-0.003300 max=0.003687 Jy/beam ! Clean residual mean=-0.000016 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.202602 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 0.202602 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.298 mas, bmaj=1.721 mas, bpa=-34.37 degrees ! Estimated noise=491.189 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319436 Jy ! Component: 100 - total flux cleaned = 0.000572646 Jy ! Component: 150 - total flux cleaned = 0.000645108 Jy ! Component: 200 - total flux cleaned = 0.000785 Jy ! Total flux subtracted in 200 components = 0.000785 Jy ! Clean residual min=-0.003292 max=0.003968 Jy/beam ! Clean residual mean=-0.000007 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.203387 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.5172e-05 Jy ! Component: 100 - total flux cleaned = 0.00012811 Jy ! Component: 150 - total flux cleaned = 0.000127938 Jy ! Component: 200 - total flux cleaned = 0.000182927 Jy ! Total flux subtracted in 200 components = 0.000182927 Jy ! Clean residual min=-0.003192 max=0.003973 Jy/beam ! Clean residual mean=-0.000006 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.20357 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 92 components and 0.20357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124339Jy sigma=0.001346 ! Fit after self-cal, rms=0.124298Jy sigma=0.001346 wmodel J2224+6016_X_2011_08_02_pus_map.mod ! Writing 92 model components to file: J2224+6016_X_2011_08_02_pus_map.mod wobs J2224+6016_X_2011_08_02_pus_uvs.fits ! Writing UV FITS file: J2224+6016_X_2011_08_02_pus_uvs.fits wwins J2224+6016_X_2011_08_02_pus_map.win ! wwins: Wrote 3 windows to J2224+6016_X_2011_08_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771486 Jy ! Component: 100 - total flux cleaned = 0.000769577 Jy ! Component: 150 - total flux cleaned = 0.000821042 Jy ! Component: 200 - total flux cleaned = 0.000871884 Jy ! Component: 250 - total flux cleaned = 0.000775676 Jy ! Component: 300 - total flux cleaned = 0.00073019 Jy ! Component: 350 - total flux cleaned = 0.000730425 Jy ! Component: 400 - total flux cleaned = 0.000644193 Jy ! Component: 450 - total flux cleaned = 0.000603622 Jy ! Component: 500 - total flux cleaned = 0.000522962 Jy ! Component: 550 - total flux cleaned = 0.000405304 Jy ! Component: 600 - total flux cleaned = 0.000214286 Jy ! Component: 650 - total flux cleaned = 0.00017777 Jy ! Component: 700 - total flux cleaned = 0.00017761 Jy ! Component: 750 - total flux cleaned = 0.000213091 Jy ! Component: 800 - total flux cleaned = 0.000108162 Jy ! Component: 850 - total flux cleaned = 7.57686e-05 Jy ! Component: 900 - total flux cleaned = 0.000142768 Jy ! Component: 950 - total flux cleaned = 4.52604e-05 Jy ! Component: 1000 - total flux cleaned = 1.43299e-05 Jy ! Component: 1050 - total flux cleaned = -1.65503e-05 Jy ! Component: 1100 - total flux cleaned = -0.000109161 Jy ! Component: 1150 - total flux cleaned = -0.000139716 Jy ! Component: 1200 - total flux cleaned = -0.000230326 Jy ! Component: 1250 - total flux cleaned = -0.000171969 Jy ! Component: 1300 - total flux cleaned = -0.000347893 Jy ! Component: 1350 - total flux cleaned = -0.000347939 Jy ! Component: 1400 - total flux cleaned = -0.000347967 Jy ! Component: 1450 - total flux cleaned = -0.000376474 Jy ! Component: 1500 - total flux cleaned = -0.000403737 Jy ! Component: 1550 - total flux cleaned = -0.000456961 Jy ! Component: 1600 - total flux cleaned = -0.000536577 Jy ! Component: 1650 - total flux cleaned = -0.000615173 Jy ! Component: 1700 - total flux cleaned = -0.000667048 Jy ! Component: 1750 - total flux cleaned = -0.0007943 Jy ! Component: 1800 - total flux cleaned = -0.000794034 Jy ! Component: 1850 - total flux cleaned = -0.000943437 Jy ! Component: 1900 - total flux cleaned = -0.000918277 Jy ! Component: 1950 - total flux cleaned = -0.000991423 Jy ! Component: 2000 - total flux cleaned = -0.00099194 Jy ! Total flux subtracted in 2048 components = -0.00103994 Jy ! Clean residual min=-0.001478 max=0.001189 Jy/beam ! Clean residual mean=-0.000006 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.20253 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 214 components and 0.20253 Jy ![Exited script file: muppet] wmap "J2224+6016_X_2011_08_02_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.298 x 1.721 at -34.37 degrees (North through East) ! Clean map min=-0.0024649 max=0.099045 Jy/beam ! Writing clean map to FITS file: J2224+6016_X_2011_08_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0990453 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000439659 device "J2224+6016_X_2011_08_02_pus\_map.eps/VPS" ! Attempting to open device: 'J2224+6016_X_2011_08_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.33169 1.33169 2.66338 5.32677 10.6535 21.3071 42.6141 85.2283 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.298 x 1.721 at -34.37 degrees (North through East) ! Clean map min=-0.0024649 max=0.099045 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2224+6016_X_2011_08_02_pus\_map.gif/vgif" ! Attempting to open device: 'J2224+6016_X_2011_08_02_pus_map.gif/vgif' mapplot cln