! Started logfile: J2224+6016_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:18:37 2012
obs J2224+6016_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J2224+6016_S_2011_08_02_pus_uva.fits
! AN table 1: 180 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.294658 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2224+6016
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 16548 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J2224+6016_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1170 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1214 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1192 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1104 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.991138Jy  sigma=0.013419
! Fit after  self-cal, rms=0.942571Jy  sigma=0.012833
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.543 mas, bmaj=5.378 mas, bpa=-31.76 degrees
! Estimated noise=1065.39 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0442346 Jy
! Component: 100  -  total flux cleaned = 0.0540978 Jy
! Total flux subtracted in 100 components = 0.0540978 Jy
! Clean residual min=-0.006720 max=0.008046 Jy/beam
! Clean residual mean=0.000113 rms=0.002013 Jy/beam
! Combined flux in latest and established models = 0.0540978 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0540978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116823Jy  sigma=0.001439
! Fit after  self-cal, rms=0.115603Jy  sigma=0.001424
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.929 mas, bmaj=6.449 mas, bpa=-33.05 degrees
! Estimated noise=436.34 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135917 Jy
! Component: 100  -  total flux cleaned = 0.0217991 Jy
! Component: 150  -  total flux cleaned = 0.0268977 Jy
! Component: 200  -  total flux cleaned = 0.0300668 Jy
! Total flux subtracted in 200 components = 0.0300668 Jy
! Clean residual min=-0.008831 max=0.011736 Jy/beam
! Clean residual mean=0.000582 rms=0.004292 Jy/beam
! Combined flux in latest and established models = 0.0841646 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.0841646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113859Jy  sigma=0.001400
! Fit after  self-cal, rms=0.113508Jy  sigma=0.001394
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 165 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.30     FD        1.42     FT        1.00*    HH        1.00*    
!   HN        0.83     KP        0.92     LA        0.72     MK        0.72     
!   NL        1.18     OV        1.62     PT        0.77     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 165 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.42     FD        1.76     FT        1.00*    HH        1.00*    
!   HN        0.85     KP        0.98     LA        0.62     MK        0.90     
!   NL        1.48     OV        1.76     PT        0.71     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 99 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.38     FD        1.74     FT        1.00*    HH        1.00*    
!   HN        0.78     KP        0.99     LA        0.57     MK        1.10     
!   NL        1.46     OV        1.75     PT        0.65     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 99 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.43     FD        1.76     FT        1.00*    HH        1.00*    
!   HN        0.79     KP        0.93     LA        0.46     MK        1.07     
!   NL        1.29     OV        1.47     PT        0.59     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.113508Jy  sigma=0.001394
! Fit after  self-cal, rms=0.132806Jy  sigma=0.001326
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.738 mas, bmaj=6.179 mas, bpa=-30.12 degrees
! Estimated noise=469.046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449672 Jy
! Component: 100  -  total flux cleaned = 0.000541762 Jy
! Component: 150  -  total flux cleaned = 0.000698259 Jy
! Component: 200  -  total flux cleaned = 0.000835911 Jy
! Total flux subtracted in 200 components = 0.000835911 Jy
! Clean residual min=-0.005065 max=0.009205 Jy/beam
! Clean residual mean=0.000065 rms=0.002270 Jy/beam
! Combined flux in latest and established models = 0.0850005 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.0850005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132631Jy  sigma=0.001325
! Fit after  self-cal, rms=0.135812Jy  sigma=0.001305
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135812Jy  sigma=0.001305
! Fit after  self-cal, rms=0.160122Jy  sigma=0.001295
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.637 mas, bmaj=6.114 mas, bpa=-31.69 degrees
! Estimated noise=480.888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130175 Jy
! Component: 100  -  total flux cleaned = 0.00136243 Jy
! Component: 150  -  total flux cleaned = 0.00141774 Jy
! Component: 200  -  total flux cleaned = 0.00147029 Jy
! Total flux subtracted in 200 components = 0.00147029 Jy
! Clean residual min=-0.004038 max=0.005210 Jy/beam
! Clean residual mean=-0.000060 rms=0.001346 Jy/beam
! Combined flux in latest and established models = 0.0864707 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.0864707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160095Jy  sigma=0.001293
! Fit after  self-cal, rms=0.161025Jy  sigma=0.001291
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000350758 Jy
! Component: 100  -  total flux cleaned = -0.000408182 Jy
! Component: 150  -  total flux cleaned = -0.000406552 Jy
! Component: 200  -  total flux cleaned = -0.000405371 Jy
! Total flux subtracted in 200 components = -0.000405371 Jy
! Clean residual min=-0.003741 max=0.005142 Jy/beam
! Clean residual mean=-0.000050 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.0860654 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.0860654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160997Jy  sigma=0.001290
! Fit after  self-cal, rms=0.160953Jy  sigma=0.001290
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160953Jy  sigma=0.001290
! Fit after  self-cal, rms=0.165496Jy  sigma=0.001289
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.633 mas, bmaj=6.044 mas, bpa=-31.35 degrees
! Estimated noise=478.786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000969377 Jy
! Component: 100  -  total flux cleaned = 0.00107975 Jy
! Component: 150  -  total flux cleaned = 0.00117563 Jy
! Component: 200  -  total flux cleaned = 0.00117712 Jy
! Total flux subtracted in 200 components = 0.00117712 Jy
! Clean residual min=-0.003601 max=0.004971 Jy/beam
! Clean residual mean=-0.000063 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.0872425 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 25 components and 0.0872425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165475Jy  sigma=0.001288
! Fit after  self-cal, rms=0.165578Jy  sigma=0.001288
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000137071 Jy
! Component: 100  -  total flux cleaned = -8.992e-05 Jy
! Component: 150  -  total flux cleaned = -4.29241e-05 Jy
! Component: 200  -  total flux cleaned = -4.23719e-05 Jy
! Total flux subtracted in 200 components = -4.23719e-05 Jy
! Clean residual min=-0.003473 max=0.004919 Jy/beam
! Clean residual mean=-0.000061 rms=0.001138 Jy/beam
! Combined flux in latest and established models = 0.0872001 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.0872001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165558Jy  sigma=0.001287
! Fit after  self-cal, rms=0.165543Jy  sigma=0.001287
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165543Jy  sigma=0.001287
! Fit after  self-cal, rms=0.164924Jy  sigma=0.001287
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.046 mas, bmaj=9.819 mas, bpa=39.92 degrees
! Estimated noise=533.399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000825931 Jy
! Component: 100  -  total flux cleaned = 0.000910912 Jy
! Component: 150  -  total flux cleaned = 0.00098508 Jy
! Component: 200  -  total flux cleaned = 0.00104846 Jy
! Total flux subtracted in 200 components = 0.00104846 Jy
! Clean residual min=-0.004934 max=0.004639 Jy/beam
! Clean residual mean=-0.000098 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 0.0882486 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 0.0882486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164925Jy  sigma=0.001286
! Fit after  self-cal, rms=0.164933Jy  sigma=0.001286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.97215e-05 Jy
! Component: 100  -  total flux cleaned = 8.70512e-05 Jy
! Component: 150  -  total flux cleaned = 0.000126684 Jy
! Component: 200  -  total flux cleaned = 0.000145176 Jy
! Total flux subtracted in 200 components = 0.000145176 Jy
! Clean residual min=-0.004957 max=0.004698 Jy/beam
! Clean residual mean=-0.000102 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 0.0883938 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.0883938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164930Jy  sigma=0.001285
! Fit after  self-cal, rms=0.164921Jy  sigma=0.001285
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.663 mas, bmaj=6 mas, bpa=-30.4 degrees
! Estimated noise=475.948 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.663 x 6 at -30.4 degrees (North through East)
! Clean map  min=-0.0034337  max=0.057412 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.283 mas, bmaj=5.016 mas, bpa=-32.49 degrees
! Estimated noise=1202.67 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0468704 Jy
! Component: 100  -  total flux cleaned = 0.0638163 Jy
! Component: 150  -  total flux cleaned = 0.0741534 Jy
! Component: 200  -  total flux cleaned = 0.0799221 Jy
! Total flux subtracted in 200 components = 0.0799221 Jy
! Clean residual min=-0.008042 max=0.009731 Jy/beam
! Clean residual mean=0.000016 rms=0.002248 Jy/beam
! Combined flux in latest and established models = 0.0799221 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0799221 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.663 mas, bmaj=6 mas, bpa=-30.4 degrees
! Estimated noise=475.948 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00435301 Jy
! Component: 100  -  total flux cleaned = 0.00508518 Jy
! Component: 150  -  total flux cleaned = 0.00540869 Jy
! Component: 200  -  total flux cleaned = 0.00570937 Jy
! Total flux subtracted in 200 components = 0.00570937 Jy
! Clean residual min=-0.003724 max=0.004812 Jy/beam
! Clean residual mean=-0.000021 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 0.0856315 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 0.0856314 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.493 mas, bmaj=5.775 mas, bpa=-34.12 degrees
! Estimated noise=768.847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012316 Jy
! Component: 100  -  total flux cleaned = 0.000659637 Jy
! Component: 150  -  total flux cleaned = 0.000465521 Jy
! Component: 200  -  total flux cleaned = 0.000546373 Jy
! Total flux subtracted in 200 components = 0.000546373 Jy
! Clean residual min=-0.005360 max=0.006486 Jy/beam
! Clean residual mean=-0.000042 rms=0.001645 Jy/beam
! Combined flux in latest and established models = 0.0861778 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152647 Jy
! Component: 100  -  total flux cleaned = 0.000296311 Jy
! Component: 150  -  total flux cleaned = 0.000431432 Jy
! Component: 200  -  total flux cleaned = 0.000560731 Jy
! Total flux subtracted in 200 components = 0.000560731 Jy
! Clean residual min=-0.005365 max=0.006415 Jy/beam
! Clean residual mean=-0.000044 rms=0.001624 Jy/beam
! Combined flux in latest and established models = 0.0867385 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.0867386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164901Jy  sigma=0.001288
! Fit after  self-cal, rms=0.164854Jy  sigma=0.001287
wmodel J2224+6016_S_2011_08_02_pus_map.mod
! Writing 23 model components to file: J2224+6016_S_2011_08_02_pus_map.mod
wobs J2224+6016_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J2224+6016_S_2011_08_02_pus_uvs.fits
wwins J2224+6016_S_2011_08_02_pus_map.win
! wwins: Wrote 1 windows to J2224+6016_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238491 Jy
! Component: 100  -  total flux cleaned = 0.00391426 Jy
! Component: 150  -  total flux cleaned = 0.00532044 Jy
! Component: 200  -  total flux cleaned = 0.00663224 Jy
! Component: 250  -  total flux cleaned = 0.00741094 Jy
! Component: 300  -  total flux cleaned = 0.00801124 Jy
! Component: 350  -  total flux cleaned = 0.00830245 Jy
! Component: 400  -  total flux cleaned = 0.00844226 Jy
! Component: 450  -  total flux cleaned = 0.00851092 Jy
! Component: 500  -  total flux cleaned = 0.008578 Jy
! Component: 550  -  total flux cleaned = 0.00870831 Jy
! Component: 600  -  total flux cleaned = 0.00870952 Jy
! Component: 650  -  total flux cleaned = 0.00877261 Jy
! Component: 700  -  total flux cleaned = 0.00877385 Jy
! Component: 750  -  total flux cleaned = 0.00871687 Jy
! Component: 800  -  total flux cleaned = 0.00877529 Jy
! Component: 850  -  total flux cleaned = 0.00888623 Jy
! Component: 900  -  total flux cleaned = 0.00877747 Jy
! Component: 950  -  total flux cleaned = 0.00867086 Jy
! Component: 1000  -  total flux cleaned = 0.00851471 Jy
! Component: 1050  -  total flux cleaned = 0.00836135 Jy
! Component: 1100  -  total flux cleaned = 0.00821099 Jy
! Component: 1150  -  total flux cleaned = 0.00781834 Jy
! Component: 1200  -  total flux cleaned = 0.0077233 Jy
! Component: 1250  -  total flux cleaned = 0.00762883 Jy
! Component: 1300  -  total flux cleaned = 0.00739731 Jy
! Component: 1350  -  total flux cleaned = 0.00726109 Jy
! Component: 1400  -  total flux cleaned = 0.00699488 Jy
! Component: 1450  -  total flux cleaned = 0.0069079 Jy
! Component: 1500  -  total flux cleaned = 0.00677888 Jy
! Component: 1550  -  total flux cleaned = 0.00652538 Jy
! Component: 1600  -  total flux cleaned = 0.00648418 Jy
! Component: 1650  -  total flux cleaned = 0.00636177 Jy
! Component: 1700  -  total flux cleaned = 0.0061616 Jy
! Component: 1750  -  total flux cleaned = 0.00592468 Jy
! Component: 1800  -  total flux cleaned = 0.00580847 Jy
! Component: 1850  -  total flux cleaned = 0.00557871 Jy
! Component: 1900  -  total flux cleaned = 0.00542758 Jy
! Component: 1950  -  total flux cleaned = 0.00512972 Jy
! Component: 2000  -  total flux cleaned = 0.00483719 Jy
! Total flux subtracted in 2048 components = 0.00458415 Jy
! Clean residual min=-0.002153 max=0.002655 Jy/beam
! Clean residual mean=-0.000048 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.0913227 Jy
keep
! Adding 146 model components to the UV plane model.
! The established model now contains 169 components and 0.0913227 Jy
![Exited script file: muppet]
wmap "J2224+6016_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.493 x 5.775 at -34.12 degrees (North through East)
! Clean map  min=-0.0037484  max=0.060361 Jy/beam
! Writing clean map to FITS file: J2224+6016_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0603611 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000803655 
device "J2224+6016_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J2224+6016_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.99424 3.99424 7.98847 15.9769 31.9539 63.9078
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.06 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.493 x 5.775 at -34.12 degrees (North through East)
! Clean map  min=-0.0037484  max=0.060361 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J2224+6016_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J2224+6016_S_2011_08_02_pus_map.gif/vgif'
mapplot cln