! Started logfile: J1957-3845_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:17:52 2012
obs J1957-3845_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1957-3845_S_2011_08_02_pus_uva.fits
! AN table 1: 81 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.155745 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1957-3845
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 3936 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1957-3845_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 633 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 633 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 633 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 633 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.629982Jy  sigma=0.005825
! Fit after  self-cal, rms=0.612242Jy  sigma=0.005645
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.801 mas, bmaj=13.47 mas, bpa=-15.82 degrees
! Estimated noise=1910.54 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.16592 Jy
! Component: 100  -  total flux cleaned = 1.42027 Jy
! Total flux subtracted in 100 components = 1.42027 Jy
! Clean residual min=-0.064675 max=0.111470 Jy/beam
! Clean residual mean=0.002242 rms=0.020452 Jy/beam
! Combined flux in latest and established models = 1.42027 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 1.42027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.342277Jy  sigma=0.003020
! Fit after  self-cal, rms=0.342280Jy  sigma=0.003020
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.129 mas, bmaj=18.43 mas, bpa=-15.15 degrees
! Estimated noise=1219.45 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0940678 Jy
! Component: 100  -  total flux cleaned = 0.134053 Jy
! Component: 150  -  total flux cleaned = 0.142564 Jy
! Component: 200  -  total flux cleaned = 0.145622 Jy
! Total flux subtracted in 200 components = 0.145622 Jy
! Clean residual min=-0.037625 max=0.059017 Jy/beam
! Clean residual mean=0.002694 rms=0.016008 Jy/beam
! Combined flux in latest and established models = 1.56589 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 24 components and 1.56589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.315579Jy  sigma=0.002816
! Fit after  self-cal, rms=0.315524Jy  sigma=0.002815
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.96     LA        1.02     MK        0.88     
!   NL        1.11     OV        0.94     PT        0.99     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.21     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.03     LA        0.93     MK        1.00     
!   NL        1.23     OV        1.00     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.20     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.00     LA        0.92     MK        0.98     
!   NL        1.25     OV        0.98     PT        0.99     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.18     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.93     LA        0.74     MK        1.05     
!   NL        1.14     OV        0.82     PT        0.90     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.315524Jy  sigma=0.002815
! Fit after  self-cal, rms=0.177558Jy  sigma=0.001448
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.169 mas, bmaj=18.48 mas, bpa=-14.55 degrees
! Estimated noise=1246.06 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00831305 Jy
! Component: 100  -  total flux cleaned = -0.00828636 Jy
! Component: 150  -  total flux cleaned = -0.00827452 Jy
! Component: 200  -  total flux cleaned = -0.00785287 Jy
! Total flux subtracted in 200 components = -0.00785287 Jy
! Clean residual min=-0.015006 max=0.016120 Jy/beam
! Clean residual mean=-0.000848 rms=0.004422 Jy/beam
! Combined flux in latest and established models = 1.55804 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 1.55804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173919Jy  sigma=0.001425
! Fit after  self-cal, rms=0.173898Jy  sigma=0.001423
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.173898Jy  sigma=0.001423
! Fit after  self-cal, rms=0.162775Jy  sigma=0.001345
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.176 mas, bmaj=18.45 mas, bpa=-14.43 degrees
! Estimated noise=1240.7 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00494142 Jy
! Component: 100  -  total flux cleaned = -0.00519791 Jy
! Component: 150  -  total flux cleaned = -0.00541128 Jy
! Component: 200  -  total flux cleaned = -0.00540701 Jy
! Total flux subtracted in 200 components = -0.00540701 Jy
! Clean residual min=-0.009114 max=0.012182 Jy/beam
! Clean residual mean=-0.000165 rms=0.002799 Jy/beam
! Combined flux in latest and established models = 1.55263 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 1.55263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161955Jy  sigma=0.001340
! Fit after  self-cal, rms=0.161908Jy  sigma=0.001339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000171377 Jy
! Component: 100  -  total flux cleaned = 0.000167435 Jy
! Component: 150  -  total flux cleaned = 0.00017502 Jy
! Component: 200  -  total flux cleaned = 0.000167844 Jy
! Total flux subtracted in 200 components = 0.000167844 Jy
! Clean residual min=-0.009352 max=0.011389 Jy/beam
! Clean residual mean=-0.000165 rms=0.002753 Jy/beam
! Combined flux in latest and established models = 1.5528 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 60 components and 1.5528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161523Jy  sigma=0.001337
! Fit after  self-cal, rms=0.161475Jy  sigma=0.001337
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161475Jy  sigma=0.001337
! Fit after  self-cal, rms=0.158442Jy  sigma=0.001290
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.178 mas, bmaj=18.43 mas, bpa=-14.43 degrees
! Estimated noise=1240.48 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369027 Jy
! Component: 100  -  total flux cleaned = -0.00026612 Jy
! Component: 150  -  total flux cleaned = -0.000356447 Jy
! Component: 200  -  total flux cleaned = -0.000444224 Jy
! Total flux subtracted in 200 components = -0.000444224 Jy
! Clean residual min=-0.007805 max=0.009049 Jy/beam
! Clean residual mean=0.000094 rms=0.002151 Jy/beam
! Combined flux in latest and established models = 1.55235 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 66 components and 1.55235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158279Jy  sigma=0.001289
! Fit after  self-cal, rms=0.158276Jy  sigma=0.001288
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000280647 Jy
! Component: 100  -  total flux cleaned = -0.000206772 Jy
! Component: 150  -  total flux cleaned = -0.000339428 Jy
! Component: 200  -  total flux cleaned = -0.000464614 Jy
! Total flux subtracted in 200 components = -0.000464614 Jy
! Clean residual min=-0.007796 max=0.008941 Jy/beam
! Clean residual mean=0.000107 rms=0.002142 Jy/beam
! Combined flux in latest and established models = 1.55189 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 1.55189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158188Jy  sigma=0.001288
! Fit after  self-cal, rms=0.158167Jy  sigma=0.001288
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158167Jy  sigma=0.001288
! Fit after  self-cal, rms=0.158293Jy  sigma=0.001288
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.72 mas, bmaj=35.17 mas, bpa=-0.8296 degrees
! Estimated noise=1353.94 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028938 Jy
! Component: 100  -  total flux cleaned = 0.000252316 Jy
! Component: 150  -  total flux cleaned = 0.000229801 Jy
! Component: 200  -  total flux cleaned = 0.000208268 Jy
! Total flux subtracted in 200 components = 0.000208268 Jy
! Clean residual min=-0.006372 max=0.009581 Jy/beam
! Clean residual mean=0.000119 rms=0.002507 Jy/beam
! Combined flux in latest and established models = 1.5521 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 80 components and 1.5521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158278Jy  sigma=0.001288
! Fit after  self-cal, rms=0.158263Jy  sigma=0.001287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.45367e-05 Jy
! Component: 100  -  total flux cleaned = -4.67646e-05 Jy
! Component: 150  -  total flux cleaned = -6.82392e-05 Jy
! Component: 200  -  total flux cleaned = -0.000107326 Jy
! Total flux subtracted in 200 components = -0.000107326 Jy
! Clean residual min=-0.006376 max=0.009606 Jy/beam
! Clean residual mean=0.000122 rms=0.002507 Jy/beam
! Combined flux in latest and established models = 1.55199 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 1.55199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158259Jy  sigma=0.001287
! Fit after  self-cal, rms=0.158249Jy  sigma=0.001287
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.177 mas, bmaj=18.43 mas, bpa=-14.42 degrees
! Estimated noise=1240.87 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.177 x 18.43 at -14.42 degrees (North through East)
! Clean map  min=-0.0074525  max=1.4599 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158249Jy  sigma=0.001287
! Fit after  self-cal, rms=0.140583Jy  sigma=0.001106
! Inverting map and beam 
! Estimated beam: bmin=4.178 mas, bmaj=18.44 mas, bpa=-14.42 degrees
! Estimated noise=1240.88 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000210196 Jy
! Component: 100  -  total flux cleaned = -0.000268692 Jy
! Component: 150  -  total flux cleaned = -0.000375521 Jy
! Component: 200  -  total flux cleaned = -0.000476698 Jy
! Total flux subtracted in 200 components = -0.000476698 Jy
! Clean residual min=-0.007585 max=0.008447 Jy/beam
! Clean residual mean=0.000084 rms=0.002101 Jy/beam
! Combined flux in latest and established models = 1.55151 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 90 components and 1.55151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140531Jy  sigma=0.001105
! Fit after  self-cal, rms=0.140525Jy  sigma=0.001105
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000124925 Jy
! Component: 100  -  total flux cleaned = -0.000172158 Jy
! Component: 150  -  total flux cleaned = -0.000261766 Jy
! Component: 200  -  total flux cleaned = -0.000305976 Jy
! Total flux subtracted in 200 components = -0.000305976 Jy
! Clean residual min=-0.007574 max=0.008442 Jy/beam
! Clean residual mean=0.000091 rms=0.002100 Jy/beam
! Combined flux in latest and established models = 1.55121 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 93 components and 1.55121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140491Jy  sigma=0.001105
! Fit after  self-cal, rms=0.140487Jy  sigma=0.001105
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140487Jy  sigma=0.001105
! Fit after  self-cal, rms=0.140547Jy  sigma=0.001105
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.843 mas, bmaj=13.45 mas, bpa=-15.15 degrees
! Estimated noise=1950.4 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1554 Jy
! Component: 100  -  total flux cleaned = 1.40746 Jy
! Component: 150  -  total flux cleaned = 1.47581 Jy
! Component: 200  -  total flux cleaned = 1.50503 Jy
! Total flux subtracted in 200 components = 1.50503 Jy
! Clean residual min=-0.017493 max=0.020164 Jy/beam
! Clean residual mean=0.000421 rms=0.004746 Jy/beam
! Combined flux in latest and established models = 1.50503 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 1.50503 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.178 mas, bmaj=18.44 mas, bpa=-14.42 degrees
! Estimated noise=1241.03 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242911 Jy
! Component: 100  -  total flux cleaned = 0.0366077 Jy
! Component: 150  -  total flux cleaned = 0.0419737 Jy
! Component: 200  -  total flux cleaned = 0.0435719 Jy
! Total flux subtracted in 200 components = 0.0435719 Jy
! Clean residual min=-0.006254 max=0.007740 Jy/beam
! Clean residual mean=0.000094 rms=0.002024 Jy/beam
! Combined flux in latest and established models = 1.5486 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 49 components and 1.5486 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.856 mas, bmaj=17.76 mas, bpa=-15.3 degrees
! Estimated noise=1433.63 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160789 Jy
! Component: 100  -  total flux cleaned = 0.00273465 Jy
! Component: 150  -  total flux cleaned = 0.00298763 Jy
! Component: 200  -  total flux cleaned = 0.00367012 Jy
! Total flux subtracted in 200 components = 0.00367012 Jy
! Clean residual min=-0.006940 max=0.007840 Jy/beam
! Clean residual mean=-0.000028 rms=0.002043 Jy/beam
! Combined flux in latest and established models = 1.55227 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000642778 Jy
! Component: 100  -  total flux cleaned = 0.000850664 Jy
! Component: 150  -  total flux cleaned = 0.00123463 Jy
! Component: 200  -  total flux cleaned = 0.00158374 Jy
! Total flux subtracted in 200 components = 0.00158374 Jy
! Clean residual min=-0.006512 max=0.006674 Jy/beam
! Clean residual mean=-0.000067 rms=0.001918 Jy/beam
! Combined flux in latest and established models = 1.55385 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 1.55385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140928Jy  sigma=0.001104
! Fit after  self-cal, rms=0.140834Jy  sigma=0.001103
wmodel J1957-3845_S_2011_08_02_pus_map.mod
! Writing 66 model components to file: J1957-3845_S_2011_08_02_pus_map.mod
wobs J1957-3845_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1957-3845_S_2011_08_02_pus_uvs.fits
wwins J1957-3845_S_2011_08_02_pus_map.win
! wwins: Wrote 2 windows to J1957-3845_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179472 Jy
! Component: 100  -  total flux cleaned = 0.00235171 Jy
! Component: 150  -  total flux cleaned = 0.0030595 Jy
! Component: 200  -  total flux cleaned = 0.00363115 Jy
! Component: 250  -  total flux cleaned = 0.00381377 Jy
! Component: 300  -  total flux cleaned = 0.00398994 Jy
! Component: 350  -  total flux cleaned = 0.0041611 Jy
! Component: 400  -  total flux cleaned = 0.00441047 Jy
! Component: 450  -  total flux cleaned = 0.00449264 Jy
! Component: 500  -  total flux cleaned = 0.00465073 Jy
! Component: 550  -  total flux cleaned = 0.00487941 Jy
! Component: 600  -  total flux cleaned = 0.00502844 Jy
! Component: 650  -  total flux cleaned = 0.00531682 Jy
! Component: 700  -  total flux cleaned = 0.00545736 Jy
! Component: 750  -  total flux cleaned = 0.00552517 Jy
! Component: 800  -  total flux cleaned = 0.00552417 Jy
! Component: 850  -  total flux cleaned = 0.00539298 Jy
! Component: 900  -  total flux cleaned = 0.0054564 Jy
! Component: 950  -  total flux cleaned = 0.00539163 Jy
! Component: 1000  -  total flux cleaned = 0.00520349 Jy
! Component: 1050  -  total flux cleaned = 0.00520391 Jy
! Component: 1100  -  total flux cleaned = 0.00508279 Jy
! Component: 1150  -  total flux cleaned = 0.0050835 Jy
! Component: 1200  -  total flux cleaned = 0.00514215 Jy
! Component: 1250  -  total flux cleaned = 0.00514174 Jy
! Component: 1300  -  total flux cleaned = 0.00502651 Jy
! Component: 1350  -  total flux cleaned = 0.00513886 Jy
! Component: 1400  -  total flux cleaned = 0.00513813 Jy
! Component: 1450  -  total flux cleaned = 0.00513812 Jy
! Component: 1500  -  total flux cleaned = 0.00513812 Jy
! Component: 1550  -  total flux cleaned = 0.00519193 Jy
! Component: 1600  -  total flux cleaned = 0.00519165 Jy
! Component: 1650  -  total flux cleaned = 0.00524389 Jy
! Component: 1700  -  total flux cleaned = 0.00524309 Jy
! Component: 1750  -  total flux cleaned = 0.00529374 Jy
! Component: 1800  -  total flux cleaned = 0.00534345 Jy
! Component: 1850  -  total flux cleaned = 0.00534329 Jy
! Component: 1900  -  total flux cleaned = 0.00539219 Jy
! Component: 1950  -  total flux cleaned = 0.00539202 Jy
! Component: 2000  -  total flux cleaned = 0.00543999 Jy
! Total flux subtracted in 2048 components = 0.005487 Jy
! Clean residual min=-0.002723 max=0.003220 Jy/beam
! Clean residual mean=-0.000149 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 1.55934 Jy
keep
! Adding 109 model components to the UV plane model.
! The established model now contains 175 components and 1.55934 Jy
![Exited script file: muppet]
wmap "J1957-3845_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.856 x 17.76 at -15.3 degrees (North through East)
! Clean map  min=-0.005704  max=1.4732 Jy/beam
! Writing clean map to FITS file: J1957-3845_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.4732 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00100869 
device "J1957-3845_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1957-3845_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.205408 0.205408 0.410815 0.821631 1.64326 3.28652 6.57305 13.1461 26.2922 52.5844
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.003 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.473 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.856 x 17.76 at -15.3 degrees (North through East)
! Clean map  min=-0.005704  max=1.4732 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1957-3845_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1957-3845_S_2011_08_02_pus_map.gif/vgif'
mapplot cln