! Started logfile: J1802-3940_S_2011_08_02_pus_uvs.log on Thu Apr 19 13:17:37 2012
obs J1802-3940_S_2011_08_02_pus_uva.fits
! Reading UV FITS file: J1802-3940_S_2011_08_02_pus_uva.fits
! AN table 1: 83 integrations on 78 of 78 possible baselines.
! Apparent sampling: 0.0962311 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1802-3940
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2651 lines of history.
! 
! Reading 2492 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1802-3940_S_2011_08_02_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 826 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 826 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 826 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 826 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.603929Jy  sigma=0.005451
! Fit after  self-cal, rms=0.582989Jy  sigma=0.005313
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.078 mas, bmaj=13.01 mas, bpa=-11.57 degrees
! Estimated noise=2528.5 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06323 Jy
! Component: 100  -  total flux cleaned = 1.32942 Jy
! Total flux subtracted in 100 components = 1.32942 Jy
! Clean residual min=-0.056768 max=0.094923 Jy/beam
! Clean residual mean=0.002431 rms=0.022156 Jy/beam
! Combined flux in latest and established models = 1.32942 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.32942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.362289Jy  sigma=0.003203
! Fit after  self-cal, rms=0.362200Jy  sigma=0.003202
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.39 mas, bmaj=18.27 mas, bpa=-10.65 degrees
! Estimated noise=1575.24 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152876 Jy
! Component: 100  -  total flux cleaned = 0.216307 Jy
! Component: 150  -  total flux cleaned = 0.245241 Jy
! Component: 200  -  total flux cleaned = 0.256623 Jy
! Total flux subtracted in 200 components = 0.256623 Jy
! Clean residual min=-0.042197 max=0.075420 Jy/beam
! Clean residual mean=0.003077 rms=0.019166 Jy/beam
! Combined flux in latest and established models = 1.58605 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 42 components and 1.58605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.294000Jy  sigma=0.002675
! Fit after  self-cal, rms=0.293937Jy  sigma=0.002674
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.10     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.96     LA        1.03     MK        0.88     
!   NL        1.11     OV        0.95     PT        1.00     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.21     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.02     LA        0.95     MK        0.99     
!   NL        1.20     OV        1.05     PT        1.01     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.20     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        1.00     LA        0.92     MK        0.99     
!   NL        1.21     OV        1.01     PT        0.99     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.20     FT        1.00*    HH        1.00*    
!   HN        1.00*    KP        0.93     LA        0.76     MK        1.03     
!   NL        1.08     OV        0.85     PT        0.91     TS        1.00*    
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.293937Jy  sigma=0.002674
! Fit after  self-cal, rms=0.157824Jy  sigma=0.001407
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.342 mas, bmaj=18.28 mas, bpa=-10.98 degrees
! Estimated noise=1588.28 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000583873 Jy
! Component: 100  -  total flux cleaned = 0.000580006 Jy
! Component: 150  -  total flux cleaned = 0.000397963 Jy
! Component: 200  -  total flux cleaned = 0.000231215 Jy
! Total flux subtracted in 200 components = 0.000231215 Jy
! Clean residual min=-0.014214 max=0.016793 Jy/beam
! Clean residual mean=-0.000733 rms=0.004668 Jy/beam
! Combined flux in latest and established models = 1.58628 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 56 components and 1.58628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157355Jy  sigma=0.001403
! Fit after  self-cal, rms=0.157270Jy  sigma=0.001402
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157270Jy  sigma=0.001402
! Fit after  self-cal, rms=0.154022Jy  sigma=0.001367
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.332 mas, bmaj=18.2 mas, bpa=-11.04 degrees
! Estimated noise=1589.07 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00350478 Jy
! Component: 100  -  total flux cleaned = 0.00405246 Jy
! Component: 150  -  total flux cleaned = 0.00453921 Jy
! Component: 200  -  total flux cleaned = 0.00498027 Jy
! Total flux subtracted in 200 components = 0.00498027 Jy
! Clean residual min=-0.011446 max=0.014916 Jy/beam
! Clean residual mean=-0.000201 rms=0.003794 Jy/beam
! Combined flux in latest and established models = 1.59126 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 62 components and 1.59126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153509Jy  sigma=0.001363
! Fit after  self-cal, rms=0.153456Jy  sigma=0.001363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000297196 Jy
! Component: 100  -  total flux cleaned = 0.000119313 Jy
! Component: 150  -  total flux cleaned = 0.000250522 Jy
! Component: 200  -  total flux cleaned = 0.000376935 Jy
! Total flux subtracted in 200 components = 0.000376935 Jy
! Clean residual min=-0.011140 max=0.014671 Jy/beam
! Clean residual mean=-0.000200 rms=0.003727 Jy/beam
! Combined flux in latest and established models = 1.59163 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 1.59163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153206Jy  sigma=0.001361
! Fit after  self-cal, rms=0.153163Jy  sigma=0.001361
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153163Jy  sigma=0.001361
! Fit after  self-cal, rms=0.146992Jy  sigma=0.001293
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.338 mas, bmaj=18.18 mas, bpa=-10.95 degrees
! Estimated noise=1590.74 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224318 Jy
! Component: 100  -  total flux cleaned = 0.00216132 Jy
! Component: 150  -  total flux cleaned = 0.00223676 Jy
! Component: 200  -  total flux cleaned = 0.00223693 Jy
! Total flux subtracted in 200 components = 0.00223693 Jy
! Clean residual min=-0.008486 max=0.012727 Jy/beam
! Clean residual mean=-0.000064 rms=0.002881 Jy/beam
! Combined flux in latest and established models = 1.59387 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 79 components and 1.59387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146861Jy  sigma=0.001292
! Fit after  self-cal, rms=0.146840Jy  sigma=0.001292
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11, 56.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103691 Jy
! Component: 100  -  total flux cleaned = 0.0120034 Jy
! Component: 150  -  total flux cleaned = 0.0124485 Jy
! Component: 200  -  total flux cleaned = 0.01255 Jy
! Total flux subtracted in 200 components = 0.01255 Jy
! Clean residual min=-0.007166 max=0.007421 Jy/beam
! Clean residual mean=-0.000221 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 1.60642 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 99 components and 1.60642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146141Jy  sigma=0.001285
! Fit after  self-cal, rms=0.146092Jy  sigma=0.001285
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146092Jy  sigma=0.001285
! Fit after  self-cal, rms=0.145958Jy  sigma=0.001284
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.93 mas, bmaj=34.49 mas, bpa=-0.83 degrees
! Estimated noise=1746.43 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00368169 Jy
! Component: 100  -  total flux cleaned = 0.00419604 Jy
! Component: 150  -  total flux cleaned = 0.00457534 Jy
! Component: 200  -  total flux cleaned = 0.00497695 Jy
! Total flux subtracted in 200 components = 0.00497695 Jy
! Clean residual min=-0.007945 max=0.005857 Jy/beam
! Clean residual mean=-0.000313 rms=0.002162 Jy/beam
! Combined flux in latest and established models = 1.6114 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 119 components and 1.6114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145863Jy  sigma=0.001283
! Fit after  self-cal, rms=0.145834Jy  sigma=0.001283
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000814177 Jy
! Component: 100  -  total flux cleaned = 0.000934011 Jy
! Component: 150  -  total flux cleaned = 0.000936132 Jy
! Component: 200  -  total flux cleaned = 0.000987769 Jy
! Total flux subtracted in 200 components = 0.000987769 Jy
! Clean residual min=-0.007863 max=0.006007 Jy/beam
! Clean residual mean=-0.000324 rms=0.002101 Jy/beam
! Combined flux in latest and established models = 1.61239 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 125 components and 1.61239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145805Jy  sigma=0.001283
! Fit after  self-cal, rms=0.145789Jy  sigma=0.001283
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.333 mas, bmaj=18.16 mas, bpa=-10.94 degrees
! Estimated noise=1589.87 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.333 x 18.16 at -10.94 degrees (North through East)
! Clean map  min=-0.0069422  max=1.3899 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145789Jy  sigma=0.001283
! Fit after  self-cal, rms=0.124713Jy  sigma=0.001068
! Inverting map and beam 
! Estimated beam: bmin=4.331 mas, bmaj=18.14 mas, bpa=-10.94 degrees
! Estimated noise=1589.82 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000323975 Jy
! Component: 100  -  total flux cleaned = 0.000327153 Jy
! Component: 150  -  total flux cleaned = 0.00032598 Jy
! Component: 200  -  total flux cleaned = 0.000322539 Jy
! Total flux subtracted in 200 components = 0.000322539 Jy
! Clean residual min=-0.007091 max=0.007169 Jy/beam
! Clean residual mean=-0.000254 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 1.61271 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 138 components and 1.61271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124608Jy  sigma=0.001067
! Fit after  self-cal, rms=0.124598Jy  sigma=0.001067
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.78358e-05 Jy
! Component: 100  -  total flux cleaned = -5.15577e-05 Jy
! Component: 150  -  total flux cleaned = -0.000116383 Jy
! Component: 200  -  total flux cleaned = -0.000176034 Jy
! Total flux subtracted in 200 components = -0.000176034 Jy
! Clean residual min=-0.007088 max=0.007176 Jy/beam
! Clean residual mean=-0.000253 rms=0.001975 Jy/beam
! Combined flux in latest and established models = 1.61253 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 142 components and 1.61253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124533Jy  sigma=0.001067
! Fit after  self-cal, rms=0.124525Jy  sigma=0.001067
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124525Jy  sigma=0.001067
! Fit after  self-cal, rms=0.124486Jy  sigma=0.001067
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=12.94 mas, bpa=-12 degrees
! Estimated noise=2532.78 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06505 Jy
! Component: 100  -  total flux cleaned = 1.34185 Jy
! Component: 150  -  total flux cleaned = 1.44643 Jy
! Component: 200  -  total flux cleaned = 1.50228 Jy
! Total flux subtracted in 200 components = 1.50228 Jy
! Clean residual min=-0.017448 max=0.027099 Jy/beam
! Clean residual mean=0.000472 rms=0.006308 Jy/beam
! Combined flux in latest and established models = 1.50228 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 1.50228 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.328 mas, bmaj=18.13 mas, bpa=-10.95 degrees
! Estimated noise=1589.66 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0483529 Jy
! Component: 100  -  total flux cleaned = 0.0704932 Jy
! Component: 150  -  total flux cleaned = 0.0838057 Jy
! Component: 200  -  total flux cleaned = 0.092515 Jy
! Total flux subtracted in 200 components = 0.092515 Jy
! Clean residual min=-0.007672 max=0.012295 Jy/beam
! Clean residual mean=-0.000096 rms=0.003081 Jy/beam
! Combined flux in latest and established models = 1.59479 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 78 components and 1.59479 Jy
! Inverting map 
uvw 0,2
! Uniform weighting is not currently selected.
! Amplitude error weighting is not currently selected.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.115 mas, bmaj=17.68 mas, bpa=-11.34 degrees
! Estimated noise=1714.41 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00488592 Jy
! Component: 100  -  total flux cleaned = 0.00692221 Jy
! Component: 150  -  total flux cleaned = 0.00847014 Jy
! Component: 200  -  total flux cleaned = 0.00992914 Jy
! Total flux subtracted in 200 components = 0.00992914 Jy
! Clean residual min=-0.007948 max=0.009534 Jy/beam
! Clean residual mean=-0.000185 rms=0.002769 Jy/beam
! Combined flux in latest and established models = 1.60472 Jy
clean
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000763061 Jy
! Component: 100  -  total flux cleaned = 0.00110759 Jy
! Component: 150  -  total flux cleaned = 0.00132678 Jy
! Component: 200  -  total flux cleaned = 0.00153706 Jy
! Total flux subtracted in 200 components = 0.00153706 Jy
! Clean residual min=-0.008005 max=0.008383 Jy/beam
! Clean residual mean=-0.000202 rms=0.002662 Jy/beam
! Combined flux in latest and established models = 1.60626 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 1.60626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124895Jy  sigma=0.001071
! Fit after  self-cal, rms=0.124819Jy  sigma=0.001070
wmodel J1802-3940_S_2011_08_02_pus_map.mod
! Writing 104 model components to file: J1802-3940_S_2011_08_02_pus_map.mod
wobs J1802-3940_S_2011_08_02_pus_uvs.fits
! Writing UV FITS file: J1802-3940_S_2011_08_02_pus_uvs.fits
wwins J1802-3940_S_2011_08_02_pus_map.win
! wwins: Wrote 2 windows to J1802-3940_S_2011_08_02_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251918 Jy
! Component: 100  -  total flux cleaned = 0.00127256 Jy
! Component: 150  -  total flux cleaned = 0.00243011 Jy
! Component: 200  -  total flux cleaned = 0.00352171 Jy
! Component: 250  -  total flux cleaned = 0.00413768 Jy
! Component: 300  -  total flux cleaned = 0.00452396 Jy
! Component: 350  -  total flux cleaned = 0.00498534 Jy
! Component: 400  -  total flux cleaned = 0.00533959 Jy
! Component: 450  -  total flux cleaned = 0.00542585 Jy
! Component: 500  -  total flux cleaned = 0.00542814 Jy
! Component: 550  -  total flux cleaned = 0.00542801 Jy
! Component: 600  -  total flux cleaned = 0.00527388 Jy
! Component: 650  -  total flux cleaned = 0.0050512 Jy
! Component: 700  -  total flux cleaned = 0.00490695 Jy
! Component: 750  -  total flux cleaned = 0.00455376 Jy
! Component: 800  -  total flux cleaned = 0.00434777 Jy
! Component: 850  -  total flux cleaned = 0.00407893 Jy
! Component: 900  -  total flux cleaned = 0.00375095 Jy
! Component: 950  -  total flux cleaned = 0.00349472 Jy
! Component: 1000  -  total flux cleaned = 0.00318199 Jy
! Component: 1050  -  total flux cleaned = 0.00299828 Jy
! Component: 1100  -  total flux cleaned = 0.00263846 Jy
! Component: 1150  -  total flux cleaned = 0.00234498 Jy
! Component: 1200  -  total flux cleaned = 0.00199963 Jy
! Component: 1250  -  total flux cleaned = 0.00171788 Jy
! Component: 1300  -  total flux cleaned = 0.00127693 Jy
! Component: 1350  -  total flux cleaned = 0.00106094 Jy
! Component: 1400  -  total flux cleaned = 0.000743914 Jy
! Component: 1450  -  total flux cleaned = 0.000536156 Jy
! Component: 1500  -  total flux cleaned = 0.000180234 Jy
! Component: 1550  -  total flux cleaned = -6.8773e-05 Jy
! Component: 1600  -  total flux cleaned = -0.000410796 Jy
! Component: 1650  -  total flux cleaned = -0.000650195 Jy
! Component: 1700  -  total flux cleaned = -0.000932716 Jy
! Component: 1750  -  total flux cleaned = -0.00121149 Jy
! Component: 1800  -  total flux cleaned = -0.00148491 Jy
! Component: 1850  -  total flux cleaned = -0.00170892 Jy
! Component: 1900  -  total flux cleaned = -0.00206132 Jy
! Component: 1950  -  total flux cleaned = -0.0021907 Jy
! Component: 2000  -  total flux cleaned = -0.00244656 Jy
! Total flux subtracted in 2048 components = -0.00265635 Jy
! Clean residual min=-0.002398 max=0.002721 Jy/beam
! Clean residual mean=-0.000160 rms=0.000958 Jy/beam
! Combined flux in latest and established models = 1.6036 Jy
keep
! Adding 158 model components to the UV plane model.
! The established model now contains 262 components and 1.6036 Jy
![Exited script file: muppet]
wmap "J1802-3940_S_2011_08_02_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.115 x 17.68 at -11.34 degrees (North through East)
! Clean map  min=-0.0065166  max=1.4011 Jy/beam
! Writing clean map to FITS file: J1802-3940_S_2011_08_02_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.4011 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000950301 
device "J1802-3940_S_2011_08_02_pus\_map.eps/VPS"
! Attempting to open device: 'J1802-3940_S_2011_08_02_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.203476 0.203476 0.406952 0.813904 1.62781 3.25561 6.51123 13.0225 26.0449 52.0898
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0028 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.401 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.115 x 17.68 at -11.34 degrees (North through East)
! Clean map  min=-0.0065166  max=1.4011 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1802-3940_S_2011_08_02_pus\_map.gif/vgif"
! Attempting to open device: 'J1802-3940_S_2011_08_02_pus_map.gif/vgif'
mapplot cln