! Started logfile: J1644-0743_X_2011_08_02_pus_uvs.log on Wed Apr 18 21:54:42 2012 obs J1644-0743_X_2011_08_02_pus_uva.fits ! Reading UV FITS file: J1644-0743_X_2011_08_02_pus_uva.fits ! AN table 1: 182 integrations on 78 of 78 possible baselines. ! Apparent sampling: 0.450197 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1644-0743 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 3149 lines of history. ! ! Reading 25564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1644-0743_X_2011_08_02_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 752 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.860877Jy sigma=0.009485 ! Fit after self-cal, rms=0.817556Jy sigma=0.009023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7685 mas, bmaj=3.154 mas, bpa=-19.8 degrees ! Estimated noise=824.113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147223 Jy ! Component: 100 - total flux cleaned = 0.179814 Jy ! Total flux subtracted in 100 components = 0.179814 Jy ! Clean residual min=-0.006672 max=0.011055 Jy/beam ! Clean residual mean=0.000025 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 0.179814 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.179814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146475Jy sigma=0.001426 ! Fit after self-cal, rms=0.146473Jy sigma=0.001426 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=3.526 mas, bpa=-18.41 degrees ! Estimated noise=406.351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014672 Jy ! Component: 100 - total flux cleaned = 0.0204464 Jy ! Component: 150 - total flux cleaned = 0.0235216 Jy ! Component: 200 - total flux cleaned = 0.0241475 Jy ! Total flux subtracted in 200 components = 0.0241475 Jy ! Clean residual min=-0.005953 max=0.004588 Jy/beam ! Clean residual mean=0.000006 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 0.203961 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 29 components and 0.203962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145076Jy sigma=0.001412 ! Fit after self-cal, rms=0.145101Jy sigma=0.001412 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 FT 1.00* HH 1.00* ! HN 1.02 KP 0.90 LA 0.98 MK 0.96 ! NL 0.94 OV 1.02 PT 1.04 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 FT 1.00* HH 1.00* ! HN 1.05 KP 0.87 LA 1.03 MK 1.03 ! NL 1.09 OV 1.04 PT 1.11 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 FT 1.00* HH 1.00* ! HN 1.03 KP 0.79 LA 0.99 MK 0.97 ! NL 1.01 OV 1.06 PT 1.03 TS 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 FT 1.00* HH 1.00* ! HN 1.02 KP 0.87 LA 1.07 MK 1.06 ! NL 1.05 OV 1.10 PT 1.13 TS 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.145101Jy sigma=0.001412 ! Fit after self-cal, rms=0.143360Jy sigma=0.001391 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.021 mas, bmaj=3.536 mas, bpa=-18.43 degrees ! Estimated noise=404.081 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282906 Jy ! Component: 100 - total flux cleaned = -0.000287155 Jy ! Component: 150 - total flux cleaned = -0.000220658 Jy ! Component: 200 - total flux cleaned = -0.000161495 Jy ! Total flux subtracted in 200 components = -0.000161495 Jy ! Clean residual min=-0.002203 max=0.002108 Jy/beam ! Clean residual mean=0.000004 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.2038 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.2038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143351Jy sigma=0.001391 ! Fit after self-cal, rms=0.143382Jy sigma=0.001390 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143382Jy sigma=0.001390 ! Fit after self-cal, rms=0.143423Jy sigma=0.001390 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.022 mas, bmaj=3.534 mas, bpa=-18.37 degrees ! Estimated noise=403.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325493 Jy ! Component: 100 - total flux cleaned = -0.000395335 Jy ! Component: 150 - total flux cleaned = -0.000406736 Jy ! Component: 200 - total flux cleaned = -0.000417835 Jy ! Total flux subtracted in 200 components = -0.000417835 Jy ! Clean residual min=-0.002172 max=0.001962 Jy/beam ! Clean residual mean=0.000005 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.203382 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.203382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143418Jy sigma=0.001390 ! Fit after self-cal, rms=0.143425Jy sigma=0.001390 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.61826e-05 Jy ! Component: 100 - total flux cleaned = -3.65448e-05 Jy ! Component: 150 - total flux cleaned = -3.62207e-05 Jy ! Component: 200 - total flux cleaned = -3.59728e-05 Jy ! Total flux subtracted in 200 components = -3.59728e-05 Jy ! Clean residual min=-0.002176 max=0.001964 Jy/beam ! Clean residual mean=0.000005 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.203346 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.203346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143423Jy sigma=0.001389 ! Fit after self-cal, rms=0.143423Jy sigma=0.001389 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143423Jy sigma=0.001389 ! Fit after self-cal, rms=0.143562Jy sigma=0.001389 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.023 mas, bmaj=3.534 mas, bpa=-18.37 degrees ! Estimated noise=403.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335565 Jy ! Component: 100 - total flux cleaned = -0.000384943 Jy ! Component: 150 - total flux cleaned = -0.000401668 Jy ! Component: 200 - total flux cleaned = -0.000401933 Jy ! Total flux subtracted in 200 components = -0.000401933 Jy ! Clean residual min=-0.002148 max=0.001973 Jy/beam ! Clean residual mean=0.000005 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.202944 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.202944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143561Jy sigma=0.001389 ! Fit after self-cal, rms=0.143563Jy sigma=0.001389 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.7919e-06 Jy ! Component: 100 - total flux cleaned = -2.58371e-06 Jy ! Component: 150 - total flux cleaned = -2.69128e-06 Jy ! Component: 200 - total flux cleaned = -9.34799e-06 Jy ! Total flux subtracted in 200 components = -9.34799e-06 Jy ! Clean residual min=-0.002150 max=0.001973 Jy/beam ! Clean residual mean=0.000005 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.202935 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.202935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143562Jy sigma=0.001389 ! Fit after self-cal, rms=0.143562Jy sigma=0.001389 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143562Jy sigma=0.001389 ! Fit after self-cal, rms=0.143656Jy sigma=0.001389 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.342 mas, bmaj=4.113 mas, bpa=-6.087 degrees ! Estimated noise=466.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138566 Jy ! Component: 100 - total flux cleaned = 0.000123716 Jy ! Component: 150 - total flux cleaned = 0.000123292 Jy ! Component: 200 - total flux cleaned = 0.000128433 Jy ! Total flux subtracted in 200 components = 0.000128433 Jy ! Clean residual min=-0.001918 max=0.002218 Jy/beam ! Clean residual mean=0.000006 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.203063 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.203063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143657Jy sigma=0.001389 ! Fit after self-cal, rms=0.143659Jy sigma=0.001389 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.68812e-06 Jy ! Component: 100 - total flux cleaned = 2.81284e-06 Jy ! Component: 150 - total flux cleaned = 1.18528e-05 Jy ! Component: 200 - total flux cleaned = 2.00421e-05 Jy ! Total flux subtracted in 200 components = 2.00421e-05 Jy ! Clean residual min=-0.001907 max=0.002209 Jy/beam ! Clean residual mean=0.000006 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.203083 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.203083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143660Jy sigma=0.001389 ! Fit after self-cal, rms=0.143660Jy sigma=0.001389 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=3.534 mas, bpa=-18.36 degrees ! Estimated noise=403.741 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 3.534 at -18.36 degrees (North through East) ! Clean map min=-0.0019322 max=0.19192 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7741 mas, bmaj=3.171 mas, bpa=-19.69 degrees ! Estimated noise=824.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147011 Jy ! Component: 100 - total flux cleaned = 0.179325 Jy ! Component: 150 - total flux cleaned = 0.190246 Jy ! Component: 200 - total flux cleaned = 0.195913 Jy ! Total flux subtracted in 200 components = 0.195913 Jy ! Clean residual min=-0.003527 max=0.003876 Jy/beam ! Clean residual mean=0.000003 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.195912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.195912 Jy ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=3.534 mas, bpa=-18.36 degrees ! Estimated noise=403.741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401726 Jy ! Component: 100 - total flux cleaned = 0.005542 Jy ! Component: 150 - total flux cleaned = 0.00599726 Jy ! Component: 200 - total flux cleaned = 0.00609479 Jy ! Total flux subtracted in 200 components = 0.00609479 Jy ! Clean residual min=-0.002162 max=0.001991 Jy/beam ! Clean residual mean=0.000005 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.202007 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.202007 Jy ! Inverting map uvw 0,2 ! Uniform weighting is not currently selected. ! Amplitude error weighting is not currently selected. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9833 mas, bmaj=3.485 mas, bpa=-18.04 degrees ! Estimated noise=431.838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146785 Jy ! Component: 100 - total flux cleaned = -7.83385e-05 Jy ! Component: 150 - total flux cleaned = -1.79755e-05 Jy ! Component: 200 - total flux cleaned = 3.56977e-05 Jy ! Total flux subtracted in 200 components = 3.56977e-05 Jy ! Clean residual min=-0.002318 max=0.002394 Jy/beam ! Clean residual mean=0.000005 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.202043 Jy clean ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.95222e-05 Jy ! Component: 100 - total flux cleaned = 0.00010885 Jy ! Component: 150 - total flux cleaned = 0.000135966 Jy ! Component: 200 - total flux cleaned = 0.000161669 Jy ! Total flux subtracted in 200 components = 0.000161669 Jy ! Clean residual min=-0.002317 max=0.002382 Jy/beam ! Clean residual mean=0.000005 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.202205 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.202205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143661Jy sigma=0.001390 ! Fit after self-cal, rms=0.143656Jy sigma=0.001389 wmodel J1644-0743_X_2011_08_02_pus_map.mod ! Writing 45 model components to file: J1644-0743_X_2011_08_02_pus_map.mod wobs J1644-0743_X_2011_08_02_pus_uvs.fits ! Writing UV FITS file: J1644-0743_X_2011_08_02_pus_uvs.fits wwins J1644-0743_X_2011_08_02_pus_map.win ! wwins: Wrote 1 windows to J1644-0743_X_2011_08_02_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.50997e-05 Jy ! Component: 100 - total flux cleaned = -0.000222599 Jy ! Component: 150 - total flux cleaned = -0.000432175 Jy ! Component: 200 - total flux cleaned = -0.000666325 Jy ! Component: 250 - total flux cleaned = -0.00089 Jy ! Component: 300 - total flux cleaned = -0.00113579 Jy ! Component: 350 - total flux cleaned = -0.00137374 Jy ! Component: 400 - total flux cleaned = -0.00163413 Jy ! Component: 450 - total flux cleaned = -0.00185931 Jy ! Component: 500 - total flux cleaned = -0.00210615 Jy ! Component: 550 - total flux cleaned = -0.00229307 Jy ! Component: 600 - total flux cleaned = -0.00247654 Jy ! Component: 650 - total flux cleaned = -0.00273264 Jy ! Component: 700 - total flux cleaned = -0.00283304 Jy ! Component: 750 - total flux cleaned = -0.00298175 Jy ! Component: 800 - total flux cleaned = -0.00319996 Jy ! Component: 850 - total flux cleaned = -0.00322409 Jy ! Component: 900 - total flux cleaned = -0.003482 Jy ! Component: 950 - total flux cleaned = -0.00357375 Jy ! Component: 1000 - total flux cleaned = -0.00368727 Jy ! Component: 1050 - total flux cleaned = -0.00384307 Jy ! Component: 1100 - total flux cleaned = -0.00393047 Jy ! Component: 1150 - total flux cleaned = -0.00399513 Jy ! Component: 1200 - total flux cleaned = -0.00412297 Jy ! Component: 1250 - total flux cleaned = -0.0042279 Jy ! Component: 1300 - total flux cleaned = -0.00433119 Jy ! Component: 1350 - total flux cleaned = -0.00439216 Jy ! Component: 1400 - total flux cleaned = -0.00453304 Jy ! Component: 1450 - total flux cleaned = -0.0045926 Jy ! Component: 1500 - total flux cleaned = -0.00473021 Jy ! Component: 1550 - total flux cleaned = -0.00490427 Jy ! Component: 1600 - total flux cleaned = -0.00501884 Jy ! Component: 1650 - total flux cleaned = -0.00518844 Jy ! Component: 1700 - total flux cleaned = -0.00528133 Jy ! Component: 1750 - total flux cleaned = -0.00542855 Jy ! Component: 1800 - total flux cleaned = -0.00550139 Jy ! Component: 1850 - total flux cleaned = -0.0055911 Jy ! Component: 1900 - total flux cleaned = -0.00569803 Jy ! Component: 1950 - total flux cleaned = -0.00580336 Jy ! Component: 2000 - total flux cleaned = -0.00594262 Jy ! Total flux subtracted in 2048 components = -0.00602905 Jy ! Clean residual min=-0.000915 max=0.000910 Jy/beam ! Clean residual mean=0.000004 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.196176 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 193 components and 0.196175 Jy ![Exited script file: muppet] wmap "J1644-0743_X_2011_08_02_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9833 x 3.485 at -18.04 degrees (North through East) ! Clean map min=-0.0019613 max=0.19155 Jy/beam ! Writing clean map to FITS file: J1644-0743_X_2011_08_02_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.191548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000356002 device "J1644-0743_X_2011_08_02_pus\_map.eps/VPS" ! Attempting to open device: 'J1644-0743_X_2011_08_02_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.557566 0.557566 1.11513 2.23026 4.46053 8.92105 17.8421 35.6842 71.3684 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.191 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9833 x 3.485 at -18.04 degrees (North through East) ! Clean map min=-0.0019613 max=0.19155 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1644-0743_X_2011_08_02_pus\_map.gif/vgif" ! Attempting to open device: 'J1644-0743_X_2011_08_02_pus_map.gif/vgif' mapplot cln